전용]

Size: px
Start display at page:

Download "전용]"

Transcription

1 A Study of select the apropos processing mechanical method by the presume of transformation of teeth s surface degree

2

3

4 ABSTRACT This study has been tried to select the apropos processing method by the presume of transformation of teeth s surface degree and form because of the cutting method of teeth during the gear finishing processing. Because of these transformation,mechanical noise and vibration occurred and it made a factor to reduce the good mechanism. Especially,if it does not concern the finishing processing after the teeth s rough cutting,it was difficult to get the precision goods because of the transformation of teeth s side degree and form. Therefore,we have studied to get the high precise teeth surface through various method. For the material of the gear cutting test,sm45c was been used for the concerning of cutting feature and heating feature to improve the confidence on the test. For the cutting tool,the Hob made by Koepfer in Germany was used for the rough cutting and finishing cutting, for it is difficult to produce in Korean. For the Gear teeth s finishing method, skiving,shaving and grinding have been used. Also, cutting tools made in Germany have been used. After each finishing processing, the data of teeth s form after the cutting teeth have been made by the gear tester made in Japan. It has been found that the transformation of teeth through the processing rough cutting, heating,finishing cutting and these transformation obstructed the apropos mechanism. And, during the measuring, the importance factor of the differences by the various processing instruments was indicated,so, it is very important to set the instruments precisely at the starting time of processing.

5 The result of the above conditions have been carefully considered,it was possible to get the high precise gear.because of the available of the presume,selecting, it brought the economic. As the result,according to the finishing processing,the differences of JIS O-4 grade have been shown, because of it, the importance of finishing processing was been indicated. The test result showed that the teeth s form could be stable safe according to the first of all the shaving, the next skiving, and Grinding.

6

7

8 List of Figures Fig.2-1 Involute formation during hobbing through enveloping cuts Fig.2-2 (a)accomplishment hob picture Fig.2-2 (b)measuring instrument Fig.2-3 (a)hob tooth profile Fig.2-3 (b)gear tooth profile Fig.3-1 drawing of machining Fig.3-2 CNC hobbing m/c Fig.3-3 scene of teeth s cutting Fig.3-4 gear tooth profile & lead(rough machining) Fig.3-5 gear tooth profile & lead(heat treatment) Fig.3-6 gear tooth profile & lead(finishing of skiving) Fig.3-7 drawing of machining Fig.3-8 CNC hobbing m/c Fig.3-9 scene of teeth s cutting Fig.3-10 scene of shaving cutting Fig.3-11 gear tooth profile & lead(rough machining) Fig.3-12 gear tooth profile & lead(finishing of shaving) Fig.3-13 gear tooth profile & lead(heat treatment) Fig.3-14 drawing of machining Fig.3-15 grinding m/c Fig.3-16 scene of teeth s grinding Fig.3-17 gear tooth profile & lead(rough machining) Fig.3-18 gear tooth profile & lead(heat treatment) Fig.3-19 gear tooth profile & lead(finishing of grinding) Fig.4-1 schematic diagram of measurement profile Fig.4-2 schematic diagram of measurement lead Fig.4-3 measuring of tooth profile Fig.4-4 measuring of tooth lead Fig.4-5 explanation graph of profile Fig.4-6 explanation graph of lead Fig.4-7 CNC gear tester Fig.4-8 scene of gear measuring

9 List of Figures Fig.4-9 comparative of result to skiving method(profile) Fig.4-10 comparative of result to shaving method (profile) Fig.4-11 comparative of result to grinding method (profile) Fig.4-12 comparative of result to skiving method(lead) Fig.4-13 comparative of result to shaving method lead) Fig.4-14 comparative of result to grinding method (lead) Fig.4-15 comparative of result to finishing(profile) Fig.4-16 comparative of result to finishing(lead) Fig.5-1 influence of hob preponderance Fig.5-2 influence of hob shaft torsion Fig.5-3 influence of hob shaft torsion Fig.5-4 influence of used RH/LH hob Fig.5-5 influence of hob processing Fig.5-6 influence of hob arbor diameter

10 List of Tables Table.2-1 selection of hob data Table.2-2 grinding stock Table.2-3 shaving stock Table.3-1 machining data Table.3-2 specification of CNC hobbing m/c Table.3-3 condition of machining Table.3-4 machining data Table.3-5 specification of CNC hobbing m/c Table.3-6 condition of machining Table.3-7 condition of shaving Table.3-8 machining data Table.3-9 specification of grinding m/c Table.3-10 condition of machining Table.4-1 specification of CNC gear tester Table.4-2 measured data of skiving(profile) Table.4-3 measured data of shaving(profile) Table.4-4 measured data of grinding(profile) Table.4-5 measured data of skiving(lead) Table.4-6 measured data of shaving(lead) Table.4-7 measured data of grinding(lead) Table.4-8 measured data of finishing(profile) Table.4-9 measured data of finishing(lead) Table.4-10 standard grade of KS,JIS,DIN

11

12

13 Fig.2-1 Involute Formation During Hobbing Through Enveloping Cuts

14 Fig.2-2 (a)accomplishment hob picture Fig.2-2 (b)measuring instrument

15 0 PRO Fig.2-3 (a) hob tooth profile Fig.2-3 (b) gear tooth profile

16

17 1 H C0.5

18 MAKER CONTROLLER

19

20

21

22

23

24

25

26

27 2 H C0.5 HELICAL GEAR

28

29

30

31

32

33

34

35

36

37

38 1 H C0.5 HELICAL GEAR

39 GRINDING REISHAUER REISHAUER REISHAUER

40

41

42

43

44

45

46

47

48 INTERFACE COUNTER A.D CONNECTOR CONTROLLER COUNTER CPU DATA BELLOWS MOTOR LINER ENCODER ROTARY ENCODER x

49 INTERFACE COUNTER A.D CONNECTOR CONTROLLER COUNTER CPU ROTARY ENCODER BELLOWS MOTOR BELLOWS MOTOR LINER ENCODER BASIC TABLE DATA

50 4 divide stylus 4 divide stylus

51 FF Faj FEj FQ FHj FEj

52 TTI TOKYO TECH 0.1

53

54

55

56

57

58

59

60

61 m

62 0 50mm 40m 8m 20m 50m top bottom

63 0 50mm 40m 4m 15m 45m top bottom f=4.5mm/rev f=1.0mm/rev f=0.75mm/rev

64 LH RH 50mm f=0.25mm/rev top f=0.4mm/rev 0 bottom 12m 15m 40m 8HOB

65 LH RH HOB

66 0 50mm 50m 84m top bottom 22mm HOB 31.75

67

68

69

GEAR KOREA

GEAR KOREA GEAR Original Equipment Manufacturing Gears Support your various needs with our world class engineering skill and the newest manufacturing facilities. 1 2 Nissei creates high-quality high-precision gears

More information

WIDIN - Toolholding Catalogue.pdf

WIDIN - Toolholding Catalogue.pdf T CH CHUC UCK K 60 ER Strong Torque Power ER Chuck have strong torque power. Slim designed ER Nut were minimized an interruption to workpiece. If using Carbide Drill and coated drill, it can be improve

More information

#Ȳ¿ë¼®

#Ȳ¿ë¼® http://www.kbc.go.kr/ A B yk u δ = 2u k 1 = yk u = 0. 659 2nu k = 1 k k 1 n yk k Abstract Web Repertoire and Concentration Rate : Analysing Web Traffic Data Yong - Suk Hwang (Research

More information

03±èÀçÈÖ¾ÈÁ¤ÅÂ

03±èÀçÈÖ¾ÈÁ¤Å x x x x Abstract The Advertising Effects of PPL in TV Dramas - Identificaiton by Implicit Memory-based Measures Kim, Jae - hwi(associate professor, Dept. of psychology, Chung-Ang University) Ahn,

More information

REVERSIBLE MOTOR 표지.gul

REVERSIBLE MOTOR 표지.gul REVERSIBLE MOTOR NEW H-SERIES REVERSIBLE MOTOR H-EX Series LEAD WIRE w RH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : Min.) MOTOR OUTPUT VOLTAGE (V) FREQUENCY (Hz) INPUT CURRENT (ma) RATING SPEED (rpm) STARTING

More information

아태연구(송석원)13-2-05.hwp

아태연구(송석원)13-2-05.hwp 아태연구 제 13권 제 2호 2006년 11월 30일 pp.81~103 일본에서의 한국학연구 - 회고와 전망 宋 錫 源 경희대학교 사회과학부 정치외교학과 조교수 Ⅰ. 머리말 Ⅱ. 1945년 이전의 한국연구 Ⅲ. 1945년 이후의 한국연구 < 목 차 > Ⅳ. 맺음말 참고문헌 Abstract Key words(중심용어): 한국학(Korean studies), 식민지지배(colonial

More information

232 도시행정학보 제25집 제4호 I. 서 론 1. 연구의 배경 및 목적 사회가 다원화될수록 다양성과 복합성의 요소는 증가하게 된다. 도시의 발달은 사회의 다원 화와 밀접하게 관련되어 있기 때문에 현대화된 도시는 경제, 사회, 정치 등이 복합적으로 연 계되어 있어 특

232 도시행정학보 제25집 제4호 I. 서 론 1. 연구의 배경 및 목적 사회가 다원화될수록 다양성과 복합성의 요소는 증가하게 된다. 도시의 발달은 사회의 다원 화와 밀접하게 관련되어 있기 때문에 현대화된 도시는 경제, 사회, 정치 등이 복합적으로 연 계되어 있어 특 한국도시행정학회 도시행정학보 제25집 제4호 2012. 12 : pp.231~251 생활지향형 요소의 근린주거공간 분포특성 연구: 경기도 시 군을 중심으로* Spatial Distribution of Daily Life-Oriented Features in the Neighborhood: Focused on Municipalities of Gyeonggi Province

More information

발간사 반구대 암각화는 고래잡이 배와 어부, 사냥하는 광경, 다양한 수륙동물 등 약 300여점의 그림이 바위면에 새겨져 있는 세계적 암각화입니다. 오랜 기간 새겨진 그림들 가운데 고래를 잡는 배와 어부모습은 전 세계적으로 유례를 찾기 힘들 정도로 그 중요성과 가치가 큽

발간사 반구대 암각화는 고래잡이 배와 어부, 사냥하는 광경, 다양한 수륙동물 등 약 300여점의 그림이 바위면에 새겨져 있는 세계적 암각화입니다. 오랜 기간 새겨진 그림들 가운데 고래를 잡는 배와 어부모습은 전 세계적으로 유례를 찾기 힘들 정도로 그 중요성과 가치가 큽 울주 대곡리 반구대 암각화 발굴조사보고서 BANGUDAE PETROGLYPH IN DAEGOK-RI, ULJOO EXCAVATION 발간사 반구대 암각화는 고래잡이 배와 어부, 사냥하는 광경, 다양한 수륙동물 등 약 300여점의 그림이 바위면에 새겨져 있는 세계적 암각화입니다. 오랜 기간 새겨진 그림들 가운데 고래를 잡는 배와 어부모습은 전 세계적으로 유례를

More information

09김정식.PDF

09김정식.PDF 00-09 2000. 12 ,,,,.,.,.,,,,,,.,,..... . 1 1 7 2 9 1. 9 2. 13 3. 14 3 16 1. 16 2. 21 3. 39 4 43 1. 43 2. 52 3. 56 4. 66 5. 74 5 78 1. 78 2. 80 3. 86 6 88 90 Ex e cu t iv e Su m m a r y 92 < 3-1> 22 < 3-2>

More information

2. Basic Technical Specifications GHO TYPE - Ver. CNC GEAR HOBBING M/C 2.2 Max. work-piece diameter /kg Ø Max. module - M Table

2. Basic Technical Specifications GHO TYPE - Ver. CNC GEAR HOBBING M/C 2.2 Max. work-piece diameter /kg Ø Max. module - M Table 1. Application The GHO-200 CNC Gear Hobbing Machine is designed to perform high speed, precision hobbing for automotive gear parts. The following operations according to a technological program are able

More information

<30322D28C6AF29C0CCB1E2B4EB35362D312E687770>

<30322D28C6AF29C0CCB1E2B4EB35362D312E687770> 한국학연구 56(2016.3.30), pp.33-63. 고려대학교 한국학연구소 세종시의 지역 정체성과 세종의 인문정신 * 1)이기대 ** 국문초록 세종시의 상황은 세종이 왕이 되면서 겪어야 했던 과정과 닮아 있다. 왕이 되리라 예상할 수 없었던 상황에서 세종은 왕이 되었고 어려움을 극복해 갔다. 세종시도 갑작스럽게 행정도시로 계획되었고 준비의 시간 또한 짧았지만,

More information

Coriolis.hwp

Coriolis.hwp MCM Series 주요특징 MaxiFlo TM (맥시플로) 코리올리스 (Coriolis) 질량유량계 MCM 시리즈는 최고의 정밀도를 자랑하며 슬러리를 포함한 액체, 혼합 액체등의 질량 유량, 밀도, 온도, 보정된 부피 유량을 측정할 수 있는 질량 유량계 이다. 단일 액체 또는 2가지 혼합액체를 측정할 수 있으며, 강한 노이즈 에도 견디는 면역성, 높은 정밀도,

More information

........

........ Investigation of the Korean Traditional Hobun Manufacturing Technique NATIONAL RESEARCH INSTITUTE OF CULTURAL HERITAGE 2008 Investigation of the Korean Traditional Hobun Manufacturing Technique - Centering

More information

173*243-³»Áö-1Æí-ÃÖÁ¾

173*243-³»Áö-1Æí-ÃÖÁ¾ STATISTICS RESEARCH INSTITUTE 2008. 4. + STATISTICS RESEARCH INSTITUTE www.nso.go.kr 16 20 32 46 67 76 89 96 115 120 122 156 178 244 264 267 Contents Table of of Table page _ 006 026 030 035 037 039

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할 저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

Vol.257 C O N T E N T S M O N T H L Y P U B L I C F I N A N C E F O R U M

Vol.257 C O N T E N T S M O N T H L Y P U B L I C F I N A N C E F O R U M 2017.11 Vol.257 C O N T E N T S 02 06 38 52 69 82 141 146 154 M O N T H L Y P U B L I C F I N A N C E F O R U M 2 2017.11 3 4 2017.11 6 2017.11 1) 7 2) 22.7 19.7 87 193.2 160.6 83 22.2 18.4 83 189.6 156.2

More information

<C7D1B9CEC1B7BEEEB9AEC7D03631C1FD28C3D6C1BE292E687770>

<C7D1B9CEC1B7BEEEB9AEC7D03631C1FD28C3D6C1BE292E687770> 설화에 나타난 사회구조와 그 의미 23) 박유미 * 차례 Ⅰ. 문제제기 Ⅱ. 서사 내부의 사회구조 Ⅲ. 사회문제의 해결방식과 그 의미 Ⅳ. 설화와 후대전승과의 상관관계 Ⅴ. 결론 국문초록 삼국유사 의 조에는 왕거인 이야기와 거타지 이야기가 하나의 설화에 묶여 전하고 있는데, 두 이야기는 해결구조에서 차이를

More information

,.,..,....,, Abstract The importance of integrated design which tries to i

,.,..,....,, Abstract The importance of integrated design which tries to i - - The Brand Touchpoint Analysis through Corporate Identity Typeface of Mobile Telecommunication Companies - Focusing on and - : Lee, Ka Young Dept. Lifestyle Design, Dankook University : Kim, Ji In Dept.

More information

12Á¶±ÔÈŁ

12Á¶±ÔÈŁ Journal of Fashion Business Vol. 5, No. 4. pp.158~175(2001) A Study on the Apparel Industry and the Clothing Culture of North Korea + Kyu Hwa Cho Prof., Dept. of Clothing & Textiles, Ewha Womans University

More information

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged

More information

04-다시_고속철도61~80p

04-다시_고속철도61~80p Approach for Value Improvement to Increase High-speed Railway Speed An effective way to develop a highly competitive system is to create a new market place that can create new values. Creating tools and

More information

Journal of Educational Innovation Research 2019, Vol. 29, No. 1, pp DOI: (LiD) - - * Way to

Journal of Educational Innovation Research 2019, Vol. 29, No. 1, pp DOI:   (LiD) - - * Way to Journal of Educational Innovation Research 2019, Vol. 29, No. 1, pp.353-376 DOI: http://dx.doi.org/10.21024/pnuedi.29.1.201903.353 (LiD) -- * Way to Integrate Curriculum-Lesson-Evaluation using Learning-in-Depth

More information

ISO17025.PDF

ISO17025.PDF ISO/IEC 17025 1999-12-15 1 2 3 4 41 42 43 44, 45 / 46 47 48 49 / 410 411 412 413 414 5 51 52 53 54 / 55 56 57 58 / 59 / 510 A( ) ISO/IEC 17025 ISO 9001:1994 ISO 9002:1994 B( ) 1 11 /, / 12 / 1, 2, 3/ (

More information

歯49손욱.PDF

歯49손욱.PDF 2002 14 C Inventory An Estimation of 14 C Inventory on Each Unit of Wolsong NPP,,, 103-16 14 C 14 C Inventory 14 C Inventory 14 C 14 C, [Inventory] = [ 14 C ] - [ 14 C ] 14 C 14 C 13 C, 14 N 17 O [ 13

More information

소개.PDF

소개.PDF (c) Process Pressure Measurement 1 Process Pressure Measurement Flow, Level, Temperature Flow, Level, Temperature, 2, 1) ( ),, A F F/A 2), 3 (a) (b) (a) (b) (c) 1 (a) (ABSOLUTE PRESSURE), 10 kg/cm 2 abs

More information

<BFACBCBCC0C7BBE7C7D02831302031203139292E687770>

<BFACBCBCC0C7BBE7C7D02831302031203139292E687770> 延 世 醫 史 學 제12권 제2호: 29-40, 2009년 12월 Yonsei J Med Hist 12(2): 29-40, 2009 특집논문 3 한국사회의 낙태에 대한 인식변화 이 현 숙 이화여대 한국문화연구원 1. 들어가며 1998년 내가 나이 마흔에 예기치 않은 임신을 하게 되었을 때, 내 주변 사람들은 모두 들 너무나도 쉽게 나에게 임신중절을 권하였다.

More information

07_Àü¼ºÅÂ_0922

07_Àü¼ºÅÂ_0922 176 177 1) 178 2) 3) 179 4) 180 5) 6) 7) 8) 9) 10) 181 11) 12) 182 13) 14) 15) 183 16) 184 185 186 17) 18) 19) 20) 21) 187 22) 23) 24) 25) 188 26) 27) 189 28) 29) 30)31) 32) 190 33) 34) 35) 36) 191 37)

More information

09È«¼®¿µ 5~152s

09È«¼®¿µ5~152s Korean Journal of Remote Sensing, Vol.23, No.2, 2007, pp.45~52 Measurement of Backscattering Coefficients of Rice Canopy Using a Ground Polarimetric Scatterometer System Suk-Young Hong*, Jin-Young Hong**,

More information

182 동북아역사논총 42호 금융정책이 조선에 어떤 영향을 미쳤는지를 살펴보고자 한다. 일제 대외금융 정책의 기본원칙은 각 식민지와 점령지마다 별도의 발권은행을 수립하여 일본 은행권이 아닌 각 지역 통화를 발행케 한 점에 있다. 이들 통화는 일본은행권 과 等 價 로 연

182 동북아역사논총 42호 금융정책이 조선에 어떤 영향을 미쳤는지를 살펴보고자 한다. 일제 대외금융 정책의 기본원칙은 각 식민지와 점령지마다 별도의 발권은행을 수립하여 일본 은행권이 아닌 각 지역 통화를 발행케 한 점에 있다. 이들 통화는 일본은행권 과 等 價 로 연 越 境 하는 화폐, 분열되는 제국 - 滿 洲 國 幣 의 조선 유입 실태를 중심으로 181 越 境 하는 화폐, 분열되는 제국 - 滿 洲 國 幣 의 조선 유입 실태를 중심으로 - 조명근 고려대학교 BK21+ 한국사학 미래인재 양성사업단 연구교수 Ⅰ. 머리말 근대 국민국가는 대내적으로는 특정하게 구획된 영토에 대한 배타적 지배와 대외적 자주성을 본질로 하는데, 그

More information

<4D6963726F736F667420576F7264202D20C1A6C7B0BBE7BEE7BCAD2D5143203532384B205FC8A8C6E4C0CCC1F65F2E646F63>

<4D6963726F736F667420576F7264202D20C1A6C7B0BBE7BEE7BCAD2D5143203532384B205FC8A8C6E4C0CCC1F65F2E646F63> Universal Testing Machines Excellent manufacturing technology Made in Taiwan & Japan (NTS_Technical) from cometech world markets QC-528K 대 하 교 역 상 사 제 품 사 양 서 Force gauge of Motorized Stand Testing Machine

More information

01김경회-1차수정.hwp

01김경회-1차수정.hwp 한국민족문화 57, 2015. 11, 3~32 http://dx.doi.org/10.15299/jk.2015.11.57.3 장복선전 에 나타난 이옥의 문제의식 고찰 - 심노숭의 사가야화기, 정약용의 방친유사 와의 비교를 중심으로 1)김 경 회 * 1. 들어가며 2. 장복선의 행적 비교 1) 입전 동기 2) 장복선의 처지 3) 장복선의 구휼 및 연대 3. 장복선의

More information

<BFA9BAD02DB0A1BBF3B1A4B0ED28C0CCBCF6B9FC2920B3BBC1F62E706466>

<BFA9BAD02DB0A1BBF3B1A4B0ED28C0CCBCF6B9FC2920B3BBC1F62E706466> 001 002 003 004 005 006 008 009 010 011 2010 013 I II III 014 IV V 2010 015 016 017 018 I. 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 III. 041 042 III. 043

More information

975_983 특집-한규철, 정원호

975_983 특집-한규철, 정원호 Focused Issue of This Month Gyu Cheol an, MD Department of Otolaryngology ead & Neck Surgery, Gachon University of College Medicine E - mail : han@gilhospital.com Won-o Jung, MD Department of Otolaryngology

More information

example code are examined in this stage The low pressure pressurizer reactor trip module of the Plant Protection System was programmed as subject for

example code are examined in this stage The low pressure pressurizer reactor trip module of the Plant Protection System was programmed as subject for 2003 Development of the Software Generation Method using Model Driven Software Engineering Tool,,,,, Hoon-Seon Chang, Jae-Cheon Jung, Jae-Hack Kim Hee-Hwan Han, Do-Yeon Kim, Young-Woo Chang Wang Sik, Moon

More information

<C0CEBCE2BFEB5FBFACB1B85F323031342D32322D3528BAAFBCF6C1A4295F3135303431355FBCF6C1A42E687770>

<C0CEBCE2BFEB5FBFACB1B85F323031342D32322D3528BAAFBCF6C1A4295F3135303431355FBCF6C1A42E687770> 연구보고서 2014-22-5 동아시아 국가의 다문화가족 현황 및 정책 비교연구 변수정 조성호 이상림 서희정 정준호 이윤석 책임연구자 변수정 한국보건사회연구원 부연구위원 주요저서 저출산 고령사회 대응 국민 인식 및 욕구 모니터링 시스템 운영 한국보건사회연구원, 2013(공저) 공동연구진 조성호 한국보건사회연구원 부연구위원 이상림 한국보건사회연구원 부연구위원 서희정

More information

<C0C7B7CAC0C720BBE7C8B8C0FB20B1E2B4C9B0FA20BAAFC8AD5FC0CCC7F6BCDB2E687770>

<C0C7B7CAC0C720BBE7C8B8C0FB20B1E2B4C9B0FA20BAAFC8AD5FC0CCC7F6BCDB2E687770> ꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚ ꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏ 儀 禮 의 社 會 的 機 能 과 變 化 李 顯 松 裵 花 玉 ꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏꠏ ꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚꠚ

More information

歯1.PDF

歯1.PDF 200176 .,.,.,. 5... 1/2. /. / 2. . 293.33 (54.32%), 65.54(12.13%), / 53.80(9.96%), 25.60(4.74%), 5.22(0.97%). / 3 S (1997)14.59% (1971) 10%, (1977).5%~11.5%, (1986)

More information

..................

.................. ptical & Mechanical Characteristics of Lining Papers Oby the Artificial Heat Ageing Treatment 1 1 This study was carried out to investigate the effect of artificial accelerated ageing treatment on the

More information

디지털포렌식학회 논문양식

디지털포렌식학회 논문양식 ISSN : 1976-5304 http://www.kdfs.or.kr Virtual Online Game(VOG) 환경에서의 디지털 증거수집 방법 연구 이 흥 복, 정 관 모, 김 선 영 * 대전지방경찰청 Evidence Collection Process According to the Way VOG Configuration Heung-Bok Lee, Kwan-Mo

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

PJTROHMPCJPS.hwp

PJTROHMPCJPS.hwp 제 출 문 농림수산식품부장관 귀하 본 보고서를 트위스트 휠 방식 폐비닐 수거기 개발 과제의 최종보고서로 제출 합니다. 2008년 4월 24일 주관연구기관명: 경 북 대 학 교 총괄연구책임자: 김 태 욱 연 구 원: 조 창 래 연 구 원: 배 석 경 연 구 원: 김 승 현 연 구 원: 신 동 호 연 구 원: 유 기 형 위탁연구기관명: 삼 생 공 업 위탁연구책임자:

More information

INDUCTION MOTOR 표지.gul

INDUCTION MOTOR 표지.gul INDUCTION MOTOR NEW HSERIES INDUCTION MOTOR HEX Series LEAD WIRE TYPE w IH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : CONTINUOUS) MOTOR TYPE IHPF10 IHPF11 IHPF IHPF22 IHPFN1U IHPFN2C OUTPUT 4 VOLTAGE

More information

<B3EDB9AEC1FD5F3235C1FD2E687770>

<B3EDB9AEC1FD5F3235C1FD2E687770> 경상북도 자연태음악의 소박집합, 장단유형, 전단후장 경상북도 자연태음악의 소박집합, 장단유형, 전단후장 - 전통 동요 및 부녀요를 중심으로 - 이 보 형 1) * 한국의 자연태 음악 특성 가운데 보편적인 특성은 대충 밝혀졌지만 소박집합에 의한 장단주기 박자유형, 장단유형, 같은 층위 전후 구성성분의 시가( 時 價 )형태 등 은 밝혀지지 않았으므로

More information

Microsoft Word - KSR2012A021.doc

Microsoft Word - KSR2012A021.doc YWXY G ºG ºG t G G GGGGGGGGGrzyYWXYhWYXG Ÿƒ Ÿ ± k ¹Ÿˆ Review about the pantograph field test result adapted for HEMU-430X (1) ÕÕÛ äñ ã G Ki-Nam Kim, Tae-Hwan Ko * Abstract In this paper, explain differences

More information

03-ÀÌÁ¦Çö

03-ÀÌÁ¦Çö 25 3 (2004 9 ) J Korean Oriental Med 2004;25(3):20-31 1), 2), 3) 1) 2) 3) Grope for a Summary Program about Intellectual Property Protection of Traditional Knowledge (TK)etc. Discussed in WIPO Hwan-Soo

More information

DBPIA-NURIMEDIA

DBPIA-NURIMEDIA 개화기 다언어(多言語) 학습서와 근대 한일 양국어* 李康民 ** i kangmin@hanmail.net The purpose of this study is to conduct a survey to analyze the 13 types of multi language textbooks published in Japan during the time

More information

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS [Caution] Attention to red sentence 3-1. Disassembly and Reassembly R520/ 1 2 1 1. As shown in picture, adhere Knob to the end closely into the arrow direction(1), then push the battery up (2). 2. Picture

More information

DBPIA-NURIMEDIA

DBPIA-NURIMEDIA 한국소음진동공학회 2015추계학술대회논문집년 Study of Noise Pattern and Psycho-acoustics Characteristic of Household Refrigerator * * ** ** Kyung-Soo Kong, Dae-Sik Shin, Weui-Bong Jeong, Tae-Hoon Kim and Se-Jin Ahn Key Words

More information

<303720C7CFC1A4BCF86F6B2E687770>

<303720C7CFC1A4BCF86F6B2E687770> 1) < 論 文 > 라이프스타일 세분화를 통한 실버타운 수요자 분석 133 주택연구 제15권 4호 2007. 12/15(4) : 133~160 Housing Studies Review Vol. 15, No. 4 : 133~160 접수일 : 2007. 7. 9, 심사일 : 2007. 7. 16, 심사완료일 : 2007. 8. 29 라이프스타일 세분화를 통한 실버타운

More information

강의지침서 작성 양식

강의지침서 작성 양식 정보화사회와 법 강의지침서 1. 교과목 정보 교과목명 학점 이론 시간 실습 학점(등급제, P/NP) 비고 (예:팀티칭) 국문 정보화사회와 법 영문 Information Society and Law 3 3 등급제 구분 대학 및 기관 학부(과) 전공 성명 작성 책임교수 법학전문대학원 법학과 최우용 2. 교과목 개요 구분 교과목 개요 국문 - 정보의 디지털화와 PC,

More information

- i - - ii - - iii - - iv - - v - - vi - - 1 - - 2 - - 3 - 1) 통계청고시제 2010-150 호 (2010.7.6 개정, 2011.1.1 시행 ) - 4 - 요양급여의적용기준및방법에관한세부사항에따른골밀도검사기준 (2007 년 11 월 1 일시행 ) - 5 - - 6 - - 7 - - 8 - - 9 - - 10 -

More information

DBPIA-NURIMEDIA

DBPIA-NURIMEDIA FPS게임 구성요소의 중요도 분석방법에 관한 연구 2 계층화 의사결정법에 의한 요소별 상관관계측정과 대안의 선정 The Study on the Priority of First Person Shooter game Elements using Analytic Hierarchy Process 주 저 자 : 배혜진 에이디 테크놀로지 대표 Bae, Hyejin AD Technology

More information

5. .......hwp

5. .......hwp X i D i ) 8 6 4 2 0-2 -4 1987 1988 1990 1992 1994 1996 1998 2000 2002 year 12 8 4 0-4 -8 1987 1988 1990 1992 1994 1996 1998 2000 2002 year 45 40 35 30 25 20 15 1987 19 90 1994 1998 2002 year ln W X 30

More information

11¹Ú´ö±Ô

11¹Ú´ö±Ô A Review on Promotion of Storytelling Local Cultures - 265 - 2-266 - 3-267 - 4-268 - 5-269 - 6 7-270 - 7-271 - 8-272 - 9-273 - 10-274 - 11-275 - 12-276 - 13-277 - 14-278 - 15-279 - 16 7-280 - 17-281 -

More information

<B1A4B0EDC8ABBAB8C7D0BAB8392D345F33C2F75F313032362E687770>

<B1A4B0EDC8ABBAB8C7D0BAB8392D345F33C2F75F313032362E687770> 광고에 나타난 가족가치관의 변화 : 97년부터 26년까지의 텔레비전 광고 내용분석* 2) 정기현 한신대학교 광고홍보학과 교수 가족주의적 가치관을 사회통합의 핵심 중의 핵심으로 올려놓았던 전통이 현대사회에서 아직 영향력을 미치는 점을 감안할 때, 한국에서의 가족변동은 사회전반의 변동으로 직결된다고 해도 크게 틀리지 않을 것이다. 97년부터 26년까지 텔레비전에서

More information

대한한의학원전학회지24권6호-전체최종.hwp

대한한의학원전학회지24권6호-전체최종.hwp 小兒藥證直訣 의 五臟辨證에 대한 小考 - 病證과 處方을 중심으로 1 2 慶熙大學校大學校 韓醫學科大學 原典學敎室 ㆍ 韓醫學古典硏究所 白裕相1,2*1)2) A study on The Diagnosis and Treatment Using The Theory of Five Organs in Soayakjeungjikgyeol(小兒藥證直訣) 1 Dept. of Oriental

More information

KAERIAR hwp

KAERIAR hwp - i - - ii - - iii - - iv - - v - - vi - Photograph of miniature SiC p-n and Schottky diode detector Photograph SiC chip mounted on a standard electrical package Photograph of SiC neutron detector with

More information

.. IMF.. IMF % (79,895 ). IMF , , % (, 2012;, 2013) %, %, %

.. IMF.. IMF % (79,895 ). IMF , , % (, 2012;, 2013) %, %, % *.. 8. Colaizzi 131, 40, 11.,,,.... * (2014). (Corresponding Author): / / 76 Tel: 041-550-2903 / E-mail: limkt3013@naver.com .. IMF.. IMF 1996 1.7% (79,895 ). IMF 1999 118,000 1980 5 2004 138,900 11 12.

More information

HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter X-axis Travel Y-axis Travel Z-axis Travel W-axis Travel Rotary Ta

HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter X-axis Travel Y-axis Travel Z-axis Travel W-axis Travel Rotary Ta HNK CNC HORIZONTAL BORING & MILLING MACHINE HBSeries The world wide leader in machine tools HNK MACHINE TOOL CO., LTD. HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter

More information

SR001 Shaft dia. Lead 1mm Ct7&Ct10 Compact Nut / SR001K Shaft dia. Lead 1mm Ct7&Ct10 PCD 17 다음도표참조 - (φ3.8) φ23 17 (13) φ φ2.9 PCD 1 다음도표참조 - (

SR001 Shaft dia. Lead 1mm Ct7&Ct10 Compact Nut / SR001K Shaft dia. Lead 1mm Ct7&Ct10 PCD 17 다음도표참조 - (φ3.8) φ23 17 (13) φ φ2.9 PCD 1 다음도표참조 - ( SR/SSR SR/SSR series Standardized Rolled Ball Screws SR시리즈 ( 전조표준품 ) 및 SSR시리즈 ( 스테인리스전조표준품 ) 의재질과표면경도는하기와같습니다. Material & Materials and of SR series Standardized Rolled Ball Screws and SSR series Standardized

More information

<C7D1B9CEC1B7BEEEB9AEC7D03631C1FD28C3D6C1BE292E687770>

<C7D1B9CEC1B7BEEEB9AEC7D03631C1FD28C3D6C1BE292E687770> 근대 이후 이순신 인물 서사 변화 과정의 의미 연구 45) * 김경남 차 례 Ⅰ. 서론 Ⅱ. 근대 계몽기 이순신 서사와 뺷유년필독뺸 Ⅲ. 일제 강점기 실기(實記)와 뺷문예독본뺸의 이순신 Ⅳ. 광복 이후의 이순신 서사 Ⅴ. 결론 국문초록 이 연구는 근대이후 교재에 나타난 이순신상을 중심으로, 영웅 서사가 어떻게 변화하 는가를 살피는 데 목적이 있다. 이 연구에서

More information

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770>

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770> 양성자가속기연구센터 양성자가속기 개발 및 운영현황 DOI: 10.3938/PhiT.25.001 권혁중 김한성 Development and Operational Status of the Proton Linear Accelerator at the KOMAC Hyeok-Jung KWON and Han-Sung KIM A 100-MeV proton linear accelerator

More information

untitled

untitled [ ] œwz, 21«6y(2008) J. of the Korean Society for Heat Treatment, Vol. 21, No. 6, (2008) pp. 300~306 š y w p x*, **Á **Áy y* * ** w œ w œw, w» gœ Solid State Diffusion Brazing of the Aluminum Alloy Castings

More information

한국성인에서초기황반변성질환과 연관된위험요인연구

한국성인에서초기황반변성질환과 연관된위험요인연구 한국성인에서초기황반변성질환과 연관된위험요인연구 한국성인에서초기황반변성질환과 연관된위험요인연구 - - i - - i - - ii - - iii - - iv - χ - v - - vi - - 1 - - 2 - - 3 - - 4 - 그림 1. 연구대상자선정도표 - 5 - - 6 - - 7 - - 8 - 그림 2. 연구의틀 χ - 9 - - 10 - - 11 -

More information

Æ÷Àå½Ã¼³94š

Æ÷Àå½Ã¼³94š Cho, Mun Jin (E-mail: mjcho@ex.co.kr) ABSTRACT PURPOSES : The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding

More information

<3635C8A32DB9CEC1B7BFACB1B82DC6ED2E687770>

<3635C8A32DB9CEC1B7BFACB1B82DC6ED2E687770> 중국 시진핑 정부의 대북정책과 북핵문제 나 영 주 (강원대학교) (yz08@yahoo.co.kr) 국문요약 시진핑이 집권할 무렵 벌어진 3차 북핵 실험 이후 북중 양국관계는 냉랭하고 경색된 모습이었다. 섣부르게 중국의 대북정책이 변하였노라고 분석되기도 하였으나 북중의 역사적, 전략적 맥락을 간과한 분석이라는 것이 북한의 4차 핵실험 이후의 대북 제재를 두고

More information

Ceramic Innovation `

Ceramic Innovation ` Ceramic Innovation www.lattron.com 1. 2. -NTC thermistor -Piezoelectric Ceramic - RF Components 3. 1-1. 1. : Lattron Co., Ltd (Latticed + Electron) 2. : / 3. : 1998.01.20 4. 1688-24 : 306-230 82-42-935-8432

More information

한국체육학회지.hwp

한국체육학회지.hwp , 40 4 3, 2001, 40, 4, pp.3-19 The Korean Journal of Physical Education, 2001, Vol.40, No.4, pp.3-19 ( ) 1980 2000,,, 4 3, 91 2, 1980,,,, 1 5, 90 1 GNP 1 95 1 5 5 IMF 5 3 IMF 5 4, IMF 8, IMF IMF 4 3 LG,,

More information

<BCF6BDC3323030392D31385FB0EDBCD3B5B5B7CEC8DEB0D4C5B8BFEEB5B5C0D4B1B8BBF3BFACB1B85FB1C7BFB5C0CE2E687770>

<BCF6BDC3323030392D31385FB0EDBCD3B5B5B7CEC8DEB0D4C5B8BFEEB5B5C0D4B1B8BBF3BFACB1B85FB1C7BFB5C0CE2E687770> ... 수시연구 2009-18.. 고속도로 휴게타운 도입구상 연구 A Study on the Concept of Service Town at the Expressway Service Area... 권영인 임재경 이창운... 서 문 우리나라는 경제성장과 함께 도시화가 지속적으로 진행되어 지방 지역의 인구감소와 경기의 침체가 계속되고 있습니다. 정부의 다각 적인

More information

fm

fm [ ] w wz DOI: 10.3740/MRSK.2009.19.12.692 Kor. J. Mater. Res. Vol. 19, No. 12 (2009) y INCONEL 718w Gas Tungsten Arc Welding» p sƒ ½»y Á *Á *Á y** ( ) d lj p wœq, *w wœ» q **( ) d lj p t Mechanical Properties

More information

11¹ÚÇý·É

11¹ÚÇý·É Journal of Fashion Business Vol. 6, No. 5, pp.125~135(2002) The Present State of E-Business according to the Establishment Year and the Sales Approach of Dongdaemun Clothing Market Park, Hea-Ryung* and

More information

<31325FB1E8B0E6BCBA2E687770>

<31325FB1E8B0E6BCBA2E687770> 88 / 한국전산유체공학회지 제15권, 제1호, pp.88-94, 2010. 3 관내 유동 해석을 위한 웹기반 자바 프로그램 개발 김 경 성, 1 박 종 천 *2 DEVELOPMENT OF WEB-BASED JAVA PROGRAM FOR NUMERICAL ANALYSIS OF PIPE FLOW K.S. Kim 1 and J.C. Park *2 In general,

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 5 RF Module Reader /Writer 3 4 2 1 RFID Tag Host Computer Antenna RFID TAG Stock Tracking Availability Improvement Loss Prevention Point-of-Sale Automation 60 50 Return on Investment 57.5 (increase

More information

002-022~41-기술2-충적지반

002-022~41-기술2-충적지반 Improvement cases of waterproofing and auxiliary construction methods in alluvium soil tunnel In the past, subway tunnel is mostly applied to rock tunnel in order to secure the safety. But, in recent years,

More information

<32303131C7CFB9DDB1E22028C6EDC1FD292E687770>

<32303131C7CFB9DDB1E22028C6EDC1FD292E687770> 통일문제연구 2011년 하반기(통권 제56호) 전쟁 경험의 재구성을 통한 국가 만들기* - 역사/다큐멘터리/기억 - 1)이 명 자** Ⅰ. 들어가는 말 Ⅱ. 과 제작배경 Ⅲ. 과 비교 Ⅳ. 역사/다큐멘터리/기억 현대 남북한 체제 형성에서 주요한 전환점인 한국전 쟁은 해방 후 시작된 좌우대립과 정치적,

More information

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Vertical Probe Card for Wafer Test Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Life Time: 500000

More information

DBPIA-NURIMEDIA

DBPIA-NURIMEDIA The e-business Studies Volume 17, Number 6, December, 30, 2016:275~289 Received: 2016/12/02, Accepted: 2016/12/22 Revised: 2016/12/20, Published: 2016/12/30 [ABSTRACT] SNS is used in various fields. Although

More information

유성감속기_K_170404

유성감속기_K_170404 Precision Planetary Gearbox Precision Planetary Gearbox SAC Series SSS Series SSC Series SAS Series SSW Series SAW Series 02 SSS Series 6 ~ 11 SAS Series 12 ~ 17 SSW Series 18 ~ 23 SAW Series 24 ~ 29 SSC

More information

2014_........pdf

2014_........pdf 1, 1, 2, 1 (1, 2 ) Jin Suk Suh 1, Jong In Kim 1, Ryeong Jae Park 2, Sang Bum Park 1 (1 Korea Forest Research Institute, 2 Korea Traditional Dye Institute) Introduction (2011-2013), (VOCs)., (7 ),,. Materials

More information

Vol.258 C O N T E N T S M O N T H L Y P U B L I C F I N A N C E F O R U M

Vol.258 C O N T E N T S M O N T H L Y P U B L I C F I N A N C E F O R U M 2017.12 Vol.258 C O N T E N T S 02 06 35 57 89 94 100 103 105 M O N T H L Y P U B L I C F I N A N C E F O R U M 2 2017.12 3 4 2017.12 * 6 2017.12 7 1,989,020 2,110,953 2,087,458 2,210,542 2,370,003 10,767,976

More information

<38305FC0B1C3A2BCB12D4D41544C41422C2053696D756C696E6BB8A620C0CCBFEBC7D12E687770>

<38305FC0B1C3A2BCB12D4D41544C41422C2053696D756C696E6BB8A620C0CCBFEBC7D12E687770> Journal of the Korea Academia-Industrial cooperation Society Vol. 17, No. 1 pp. 693-699, 2016 http://dx.doi.org/10.5762/kais.2016.17.1.693 ISSN 1975-4701 / eissn 2288-4688 MATLAB/Simulink를 이용한 화력발전소 복수펌프

More information

<BABBB9AE2E687770>

<BABBB9AE2E687770> 253 단소산조 퉁소산조 피리산조 형성시기 재검토 49) 이진원* Ⅰ. 머리말 Ⅱ. 기존 연구성과 검토 Ⅲ. 단소산조 퉁소산조 피리산조 형성시기 검토 Ⅳ. 단소산조 퉁소산조 피리산조 형성시기 재검토의 의의 Ⅴ. 맺음말 Ⅰ. 머릿말 우리나라의 대표적인 종취관악기(縱吹管樂器)에는 무황악기(無簧樂器)인 퉁소 단소가 있 고, 유황악기(有簧樂器)로 피리와 쇄납 등이

More information

서론

서론 - i - - ii - - iii - - iv - - v - - vi - - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - -

More information

Journal of Educational Innovation Research 2018, Vol. 28, No. 3, pp DOI: NCS : * A Study on

Journal of Educational Innovation Research 2018, Vol. 28, No. 3, pp DOI:   NCS : * A Study on Journal of Educational Innovation Research 2018, Vol. 28, No. 3, pp.157-176 DOI: http://dx.doi.org/10.21024/pnuedi.28.3.201809.157 NCS : * A Study on the NCS Learning Module Problem Analysis and Effective

More information

THE JOURNAL OF KOREAN INSTITUTE OF ELECTROMAGNETIC ENGINEERING AND SCIENCE. vol. 29, no. 10, Oct ,,. 0.5 %.., cm mm FR4 (ε r =4.4)

THE JOURNAL OF KOREAN INSTITUTE OF ELECTROMAGNETIC ENGINEERING AND SCIENCE. vol. 29, no. 10, Oct ,,. 0.5 %.., cm mm FR4 (ε r =4.4) THE JOURNAL OF KOREAN INSTITUTE OF ELECTROMAGNETIC ENGINEERING AND SCIENCE. 2018 Oct.; 29(10), 799 804. http://dx.doi.org/10.5515/kjkiees.2018.29.10.799 ISSN 1226-3133 (Print) ISSN 2288-226X (Online) Method

More information

, 41 ( ) * 1) ***.,. I.,..., ( ) ( ).,. ( ) *. ** 1

, 41 ( ) * 1) ***.,. I.,..., ( ) ( ).,. ( ) *. ** 1 , 41 (2007 12 ) * 1) ***.,. I.,..., ( ) ( ).,. ( ) *. ** 1 2, 41,. 0..,,.,,.,,.....,,.., 3..,,... II. ( ).,.,. ( ).. : 1 1. 1. ( : 1,000, 4, 41 : 8%, : 3 ) 1,000. ( ) 12%. 1 1, 10 5,000 1 5,800. 1 903.926

More information

공연영상

공연영상 한국 예능프로그램의 중국 현지화 연구 81 82 한국 예능프로그램의 중국 현지화 연구 심춘수* 강빙양** 24)25) Ⅰ. 머리말 Ⅱ. 중국 예능시장 규모 및 프로그램 특징 Ⅲ. 한국 예능프로그램의 대중 수출현황 및 인기요인 Ⅳ. 한국 예능프로그램의 중국 현지화 요인 Ⅴ. 결론 Ⅰ. 머리말 최근 들어 드라마와 음악에 이어 예능프로그램(이하 예능프로)이 중국

More information

Study on Wood art in Tongyoung Sudo Mamoru' PARK Hyun kuk*2 Tongyoung is the most famous of the Korean traditional woodenware, furniture, small dining tables, woodenware technology, and lacquer ware inlaid

More information

38이성식,안상락.hwp

38이성식,안상락.hwp 동영상UCC의 활성화에 따른 영상디자인의 대중화 현상에 관한 연구 A Study on Development of Public Relationship of UCC Animation in Social Network 주저자: 이성식 (Lee, Sung Sik) (주)펄슨앤커뮤니케이션 공동저자: 안상락(An, Sang Lak) 한국재활복지대학 광고홍보과 논문요약 Abstract

More information

Using Material of High Quality! ST 044N LYOUT O TH HIN Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space (Dimensions in mm) ending radius

Using Material of High Quality! ST 044N LYOUT O TH HIN Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space (Dimensions in mm) ending radius Min Max ST 044N MTRIL hain material: PS-polyamide with glass fiber reinforced UL94-H Low Noise Low Mote Speed : 10m / sec Temperature : -30 ~ +130 Other installation Length: Vertical curve above= max 2.0m

More information

<313020C1A4BFECBAC034332E687770>

<313020C1A4BFECBAC034332E687770> 18세기 馬 兵 의 한글일기 난리가 연구 1)정우봉 * 1. 서론 2. 난리가 의 장르, 작가 및 창작 시기 3. 난리가 의 주제의식과 표현방식 4. 결론 난리가( 亂 離 歌 ) 는 1728년에 발생한 戊 申 亂 (일명 李 麟 佐 의 난)을 진압하 기 위해 官 軍 으로 참전한 訓 練 都 監 소속의 한 馬 兵 이 산문으로 기록한 한글 일기

More information

김경재 안현철 지능정보연구제 17 권제 4 호 2011 년 12 월

김경재 안현철 지능정보연구제 17 권제 4 호 2011 년 12 월 지능정보연구제 17 권제 4 호 2011 년 12 월 (pp.241~254) Support vector machines(svm),, CRM. SVM,,., SVM,,.,,. SVM, SVM. SVM.. * 2009() (NRF-2009-327- B00212). 지능정보연구제 17 권제 4 호 2011 년 12 월 김경재 안현철 지능정보연구제 17 권제 4 호

More information

IKC43_06.hwp

IKC43_06.hwp 2), * 2004 BK21. ** 156,..,. 1) (1909) 57, (1915) 106, ( ) (1931) 213. 1983 2), 1996. 3). 4) 1),. (,,, 1983, 7 12 ). 2),. 3),, 33,, 1999, 185 224. 4), (,, 187 188 ). 157 5) ( ) 59 2 3., 1990. 6) 7),.,.

More information

우리들이 일반적으로 기호

우리들이 일반적으로 기호 일본지방자치체( 都 道 府 縣 )의 웹사이트상에서 심벌마크와 캐릭터의 활용에 관한 연구 A Study on the Application of Japanese Local Self-Government's Symbol Mark and Character on Web. 나가오카조형대학( 長 岡 造 形 大 學 ) 대학원 조형연구과 김 봉 수 (Kim Bong Su) 193

More information

10송동수.hwp

10송동수.hwp 종량제봉투의 불법유통 방지를 위한 폐기물관리법과 조례의 개선방안* 1) 송 동 수** 차 례 Ⅰ. 머리말 Ⅱ. 종량제봉투의 개요 Ⅲ. 종량제봉투의 불법유통사례 및 방지대책 Ⅳ. 폐기물관리법의 개선방안 Ⅴ. 지방자치단체 조례의 개선방안 Ⅵ. 결론 국문초록 1995년부터 쓰레기 종량제가 시행되면서 각 지방자치단체별로 쓰레기 종량제 봉투가 제작, 판매되기 시작하였는데,

More information

황지웅

황지웅 Comparison of Laparoscopy and Exploration in the Distal Pancreatectomy BACKGROUND: To determine the benefits of laparoscopic surgery compared with exploration, the clinical outcomes of open and laparoscopic

More information

국립국어원 2011-01-28 발간 등록 번호 11-1371028-000350-01 신문과 방송의 언어 사용 실태 조사 연구 책임자: 남영신 국립국어원 2011-01-28 발간 등록 번호 11-1371028-000350-01 신문과 방송의 언어 사용 실태 조사 연구 책임자: 남영신 2011. 11. 16. 제 출 문 국립국어원장 귀하 2011년 신문과 방송의

More information

0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의

0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의 0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지6 GEAR COUPLING 0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information