Cleated Belt Conveyor (EDEM)

Size: px
Start display at page:

Download "Cleated Belt Conveyor (EDEM)"

Transcription

1 Cleated Belt Conveyor (EDEM)

2 Copyright 2019 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea and other countries and is provided under a license agreement that restricts copying, disclosure, and use of such documentation. FunctionBay, Inc. hereby grants to the licensed user the right to make copies in printed form of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made shall include the FunctionBay, Inc. copyright notice and any other proprietary notice provided by FunctionBay, Inc. This documentation may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written consent of FunctionBay, Inc. and no authorization is granted to make copies for such purpose. Information described herein is furnished for general information only, is subjected to change without notice, and should not be construed as a warranty or commitment by FunctionBay, Inc. FunctionBay, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. The software described in this document is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the Republic of Korea and other countries. UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. Registered Trademarks of FunctionBay, Inc. or Subsidiary RecurDyn is a registered trademark of FunctionBay, Inc. RecurDyn/Professional, RecurDyn/ProcessNet, RecurDyn/Acoustics, RecurDyn/AutoDesign, RecurDyn/Bearing, RecurDyn/Belt, RecurDyn/Chain, RecurDyn/CoLink, RecurDyn/Control, RecurDyn/Crank, RecurDyn/Durability, RecurDyn/EHD, RecurDyn/Engine, RecurDyn/eTemplate, RecurDyn/FFlex, RecurDyn/Gear, RecurDyn/DriveTrain, RecurDyn/HAT, RecurDyn/Linear, RecurDyn/Mesher, RecurDyn/MTT2D, RecurDyn/MTT3D, RecurDyn/Particleworks I/F, RecurDyn/Piston, RecurDyn/R2R2D, RecurDyn/RFlex, RecurDyn/RFlexGen, RecurDyn/SPI, RecurDyn/Spring, RecurDyn/TimingChain, RecurDyn/Tire, RecurDyn/Track_HM, RecurDyn/Track_LM, RecurDyn/TSG, RecurDyn/Valve are trademarks of FunctionBay, Inc. Edition Note This document describes the release information of RecurDyn V9R3.

3 목차 RecurDyn 리본에 EDEM UI 등록... 3 목적... 3 예상소요시간... 3 Configuration XML 파일가져오기... 4 시작모델해석및분석... 6 목적... 6 예상소요시간... 6 모델불러오기... 7 시뮬레이션실행... 9 Wall 생성및내보내기 목적 예상소요시간 Wall 생성하기 *.wall 파일내보내기 EDEM 모델생성 목적 예상소요시간 EDEM Creator EDEM Simulator Co-simulation 목적 예상소요시간 Co-simulation EDEM Analyst 결과분석및검토 목적 예상소요시간 Post Process... 30

4 Chapter 1 개요 본교재는 RecurDyn 과 EDEM 두소프트웨어간의 Co-simulation 하는방법을다루고있습니다. RecurDyn 은기구해석과유연체해석을담당하고, EDEM 는 DEM(Discrete Element Modeling) 법을이용해입자해석을담당합니다. 본교재에서는두소프트웨어를사용하여유연체의움직임에따른입자의거동을해석하게됩니다. 본교재에서다루게될모델은 Cleated Belt Conveyor 시스템으로서일정속도로유입되는입자를경사면을따라위로로퍼나르는모델입니다. 입자의유실없이최대로효율이좋은벨트의속도또는입자의유입속도를찾아봅니다. 목적 본교재에서다루고자하는내용은다음과같습니다. RecurDyn 을통한강체, 유연체에대한 Wall 생성방법 RecurDyn 을통한 Wall Export 방법 EDEM 에서물성을찾는방법 EDEM 에서입자들을생성하는방법 RecurDyn 에서 Co-simulation 을수행하는방법 RecurDyn 과 EDEM 에서 Post-processing 을수행하는방법 1

5 필요요건 본교재는 RecurDyn 에서제공하는 Basic Tutorial 을사전에숙지한사용자를위한것입니다. 따라서본교재를사용하기위해서는앞서언급된교재를선행해야본교재의이해를높일수있습니다. 본교재를진행하기위해서는 EDEM 소프트웨어가설치되어있어야합니다. 본교재는 EDEM 2019 버전으로진행하였습니다. 과정 본교재는다음의과정들로구성되어있습니다. 각각의과정을완성하기까지걸리는시간은아래의표와같습니다. (* 소요시간 ( 분 ) 은컴퓨터의사양과숙련도에따라달라질수있습니다.) 과정시간 ( 분 ) RecurDyn 리본에 EDEM UI 등록 5 시작모델해석및분석 15 Wall 생성및내보내기 5 EDEM 모델생성 10 Co-simulation 150 결과분석및검토 10 총합 195 2

6 Chapter 2 RecurDyn 리본에 EDEM UI 등록 RecurDyn 리본 GUI 에는기본적으로 External SPI(EDEM) GUI 가보이지않습니다. 별도로제공되는 Configuration XML 파일을사용하여 RecurDyn 에 GUI 를추가해야합니다. 목적 본장에서는 EDEM 소프트웨어에서제공하는 Configuration XML 파일을사용하여 RecurDyn 리본에 GUI 에 External SPI(EDEM) 탭을추가하는방법을배우게됩니다. 5 분 예상소요시간 3

7 Configuration XML 파일가져오기 EDEMV1_1_0.xml 파일복사하기 EDEM 소프트웨어설치경로에있는 EDEMV1_1_0.xml 파일을복사합니다. <EDEM Install Path>\lib\EDEMV1_1_0.xml RecurDyn 폴더에붙여넣기 위에서복사한 EDEMV1_1_0.xml 파일을아래경로에붙여넣습니다. <RecurDyn Install Path>\Bin\Solver\CoSim\StdParticleInterface\EDEMV1_1_0.xml RecurDyn GUI 확인하기 RecurDyn 을실행해보면아래그림과같이리본 GUI 에 External SPI 탭이생성되고하위에 EDEM 그룹이생성됩니다. Particle Solver DLL 경로확인하기 Particle Solver DLL 파일이있어야할경로를확인합니다. 1. External SPI 탭의 EDEM 그룹에서 Settings 를클릭합니다. 2. 대화상자가나타나면 Info 버튼을클릭합니다. Info 대화상자에서 DLL Path 를확인할수있습니다. 이값은 EDEM 의기본설치위치로 설정되어있기때문에 EDEM 을다른경로에설치하였다면 Configuration XML 파일에서 DLL Path 를수정해줘야합니다. 4

8 Tip: Configuration XML 에서 Particle Solver DLL Path 수정하기 (Info 의 DLL Path 가다른경우진행 ) 1. EDEMV1_1_0.xml 파일을엽니다. 2. 아래그림과같이 <Path> 뒤에적힌 DLL 경로를알맞게수정합니다. 3. Configuration XML 파일을저장합니다. 4. Configuration XML 이정상적으로수정된것을확인한후 RecurDyn 을재시작합니다. 5

9 Chapter 3 시작모델해석및분석 본교재에는완성된 Cleated Belt Conveyor 모델을제공합니다. ED Configuration EM 과 Cosimulation 을진행하기에앞서 RecurDyn 에서 MFBD 모델을단독으로해석해보고모델은분석해봅니다. 목적 본장에서는 RecurDyn 에서제공하는 Cleated Belt Conveyor 모델을해석한후분석합니다. 15 분 예상소요시간 6

10 모델불러오기 예제모델복사하기 RecurDyn 에서제공하는 SPI(EDEM) 튜토리얼예제폴더를해석이가능한위치에복사합니다. 폴더경로 : <Install Dir>\Help\Tutorial\SPI\EDEM\CleatedBeltConveyor RecurDyn 실행및초기모델불러오기 1. 바탕화면에서 RecurDyn 아이콘을더블클릭하면, RecurDyn 이실행되면서 Start RecurDyn 대화상자가나타납니다. 1. Start RecurDyn 대화상자가나타나면닫아줍니다. 2. File 메뉴에서 Open 을클릭합니다. 3. 위에서복사한 CleatedBeltConveyor 폴더에있는 CleatedBeltConveyor_Start.rdyn 선택합니다. 4. Open 을클릭합니다. 아래의그림처럼모델이보여집니다. 7

11 모델구성분석하기 1. Render Toolbar 에서 Layer Settings 를클릭합니다. 2. Layer Settings 대화상자에서각 Layer 의 On 을켜고끄면서모델은분석합니다. 모델의구성은다음과같습니다. 모델은 Belt, Frame, Roller, Tensioner, Container 로구성되어있습니다. 여기서 Belt 는 Flexible Body 로모델링되어있습니다. Belt 와 Roller 는 Geo Cylinder Contact 구성되어있고 Roller 는 Motion 에의해회전합니다. 8

12 시뮬레이션실행 모델의시스템을이해하는것을돕기위해서시뮬레이션을실행합니다. 시뮬레이션실행하기 1. Analysis 탭의 Simulation Type 그룹에서, Dyn/Kin 를선택합니다. Dynamic/Kinematic Analysis 대화상자가나타납니다. 2. 설정된상태를확인한뒤, Simulation 버튼을클릭합니다. End Time: 2 Step: 200 결과보기 Analysis 탭의 Animation Control 그룹에서 Play 버튼을눌러아래그림처럼시스템이작동하는것을확인합니다. 위쪽 Roller 에달려있는 RevJoint1 의 Motion 에의해 Belt 가움직입니다. RevJoint1 의 Pos1_Relative 에대한 Scope 를그려보면 1 초의주기로일정하게회전하는것을알수있습니다. 9

13 Chapter 4 Wall 생성및내보내기 RecurDyn 과 EDEM 이서로데이터를주고받기위해 Wall 이라는매개체가필요합니다. 목적 본장에서는 EDEM 에서 Import 할 Geometry 를 RecurDyn 에서정의하는방법과 *.wall 파일을내보는방법을배우게됩니다. 5 분 예상소요시간 10

14 Wall 생성하기 Note: Wall 이란? Wall 은유체와접하는 Geometry 를정의하는 Entity 이다. RecurDyn 은 Wall 을통해입자로부터받는 RecurDyn EDEM Wall Position/Velocity Sloshing Reacting force Reaction Force by Particles Particles Wall 외력에대한데이터를받고 EDEM 은 Wall 을통해 Geometry 의움직임에대한데이터를받는다 Flexible Body 를 Wall 로정의하기위해서는 Wall 로지정할면을 Patch Set 으로정의해야합니다. PatchSet 생성하기 1. Shell_CleatedBelt 의 Flex Edit Mode 에진입합니다. 2. FFlex Edit 탭의 Set 그룹에서 Patch 를클릭합니다. 3. Patch Set 대화상자에서 Add/Remove 를클릭합니다. 4. 전체 Patch 를선택합니다. 5. Working Window 에서마우스우클릭한후나타난 Pop-up Menu 에서 Finish Operation 을클릭합니다. 11

15 6. No. of Patches 가 5340 인지확인한후 OK 를눌러 Patch Set 을생성합니다. Database 에 SetPatch2 가생성됨을확인합니다. 7. Exit 을클릭하여 Edit Mode 에서나옵니다. Particle 이접촉되는 Belt, Container, Frame 에 Wall 을생성해줍니다. Wall 생성하기 1. External SPI 탭의 EDEM 그룹에서 Walls 를클릭합니다. 2. Working Window 에서 Shell_CleatedBelt.SetPatch2 을클릭합니다. Wall1 이생성됩니다. 12

16 과정을반복하여 Geometry 들을이용하여 Wall 을생성합니다. Frame.ImportedSolid15 Frame.ImportedSolid16 Container1.ImportedSolid1 Container2.ImportedSolid1 13

17 *.wall 파일내보내기 1. External SPI 탭의 EDEM 그룹에서 Export 를클릭합니다. 2. 대화상자가나타나면저장할폴더를찾아선택후 OK 를클릭하여저장합니다. 저장된폴더에 EDEM.wall 파일과 Wall1.obj, Wall2.stl, Wall3.stl, Wall4.stl, Wall5.stl 이생성됩니다. Note: *.obj 파일과 *.stl 파일에는 Wall Geometry 의 CAD 정보가저장됩니다. 그리고 EDEM.wall 파일에는 Wall Geometry(*.obj, *.stl) 의위치자세에대한정보들이들어있습니다. Geometry File 들은 RecurDyn 단위계와상관없이항상 Meter 단위로정보를찍습니다. Tip: RecurDyn 단독해석하기 Wall 이생성된다음부터는 RecurDyn 은 Simulation 을실행하면 EDEM 과 Co-simulation 을 진행하려고시도합니다. 따라서 EDEM 이연결되기전에해석이불가능합니다. EDEM 과의연결관계를끊고 RecurDyn 만단독해석을수행하려면 Connect 상황을해지합니다. 14

18 Chapter 5 EDEM 모델생성 EDEM 에는여러방식으로입자를생성할수있습니다. 그중일정속도로입자를생성하는방식을이용하여벨트위에입자를생성해봅니다. 목적 본장에서는 EDEM 에서제공하는 Material 를통해입자의물성을세팅하는방법과입자를생성하는방법등을배우게됩니다. 10 분 예상소요시간 15

19 EDEM Creator EDEM 실행및 RecurDyn Coupling 세팅하기 1. EDEM.exe 를실행합니다. 2. EDEM 이실행되면 Tool>Options 를클릭합니다. 뒤에서 EDEM 모델을모델링할때입력받는값들의단위를맞추기위해서 Unit 설정을변경합니다. 3. Options 대화상자가열리면, Units 탭에서 Set All to SI 버튼을클릭하여단위계초기화시켜줍니다. 4. Angle, Length, Velocity 의단위를아래와같이변경합니다. Angle: deg Length: mm Velocity: mm/s 5. Additional Components 탭에서 Coupling Options 그룹의 RecurDyn Coupling 옵션을켭니다. 이옵션을활성화시키지않으면나중에 RecurDyn 에서 Export 한 *.wall 파일을 Import 할수없습니다. 6. OK 를클릭합니다. 16

20 EDEM 에서제공하는 GEMM Database 를통해입자특성에맞는적절한 input deck 를찾아불러옵니다. Tip: GEMM (Generic EDEM Material Model) Database GEMM Database 에는바위, 토양, 광석등광범위한재료를대표하는수천가지재료모델이포함되어있습니다. 사용자는 GEMM Database 에있는방대한양의재료정보를활용하여 EDEM 시뮬레이션에사용할 input deck 를다운로드할수있습니다. Material 생성하기 1. Database 에서 Bulk Material 을우클릭하여 Open GEMM Wizard 를클릭합니다. Material Wizard 대화상자가나타납니다. 2. Search by Material Properties 를선택한후 Next 를클릭합니다. 3. Small: Back hoe, Screw auger or smallscale mixing equipment 를선택한후 Next 를 클릭합니다. 17

21 4. >2000kg/m^3 를선택한후 Next 를클릭합니다. 5. Angle 에 40 를입력한후 Next 를클릭합니다. 6. 첫번째줄에표기된 Material 을선택한후 Next 를 클릭합니다. 18

22 7. Medium Wall Friction 을선택한후 Finish 를 클릭합니다. Bulk Material 은입자에적용되는물성치이고 Equipment Material 은 Wall 에적용되는 물성치입니다. 위에서찾은특성에맞는 Input 값이적용된 material 이각각추가됩니다. 오른쪽그림과같이 Database 의 Bulk Material 과 Equipment Material 에 GEMM_particle_material_2191 과 GEMM_geopetry_material_2191_medium 이추가된것을확인할수있습니다. 19

23 GEMM_particle_material_2191 하위에 Particle 에대한정보인 GEMM_particle_2191 이 포함되어있습니다. Property 값을수정하여 Particle 의 Size 를변경해봅니다. Particle Shape 수정하기 1. Bulk Material> GEMM_particle_material_2191> GEMM_particle_2191 을클릭합니다. 2. Modify Shape 을클릭합니다. 3. Triple Sphere 를클릭한후 Physical Radius 를 7mm 까지키웁니다. 아래그림과같이 sphere0, sphere1, sphere2 가모두 7mm 가되었는지확인합니다. 값이다르다면직접아래와같이수정하여맞춥니다. Particle 에대한설정이모두끝났습니다. 이제 RecurDyn 에서 Export 한 Wall 을 EDEM 에서 Import 를해야합니다. 20

24 RecurDyn Wall 불러오기 1. Database 에서 Geometries 를우클릭하여 Import Geometry from RecurDyn 을 클릭합니다. 2. RecurDyn 에서 Export 한 EDEM.wall 파일을 Open 합니다. 3. Import Options 대화상자가나타나면 Choose Units 을 Meters 로설정하고 OK 를클릭합니다. ( 위에서언급한것과같이 RecurDyn 에서 Export 된 Wall 의 Geometry File 들은 Meter 단위로작성되었습니다 ) 4. Geometry Import Parameters 대화상자가나타나면 OK 를 클릭합니다. 아래그림과같이 Database 에 5 개의 Wall 이 Import 된것을 확인할수있습니다. 21

25 Particle 이생성하는구역정의하기 1. Database 에서 Geometries 를우클릭하여 Add Geometry>Polygon 을클릭합니다. Geometries 하위에 New Section 5 가생성됩니다. 2. New Section 5 하위에 Polygon 을클릭하여형상과위치를변경합니다. Center X: 340mm Y: -90mm Z: 0mm Rotation X: 90deg Y: 0deg Z: 120deg Length Edge A: 40mm Edge B: 150mm 오른쪽그림과같이 New Section 5 가 벨트하단부분에정의됩니다. 22

26 New Section 5 를클릭한후 Type 을 Virtual 로변경합니다. Type 이 Virtual 로변경되어야 Factory 를생성할수있습니다. (Factory 는입자생성을정의하는 Entity 입니다.) 3. Database 에서 New Section 5 를우클릭하여 Add Factory 를클릭합니다. New Section 5 하위에 New Factory 1 이생성됩니다. 4. New Factory 1 을클릭하여아래와같이수정합니다. Particle Generation Unlimited Number Target Number (per second): 50 위와같이설정되면초당 50 개의입자가 Polygon 위치에서생성됩니다. Parameters Velocity: Fixed 입자가생성될때일정한초기속도를갖습니다. 입자의초기속도를수정해봅니다. 5. Parameters 의 Velocity 의 Config 를클릭합니다. 6. Velocity Fixed 대화상자에서 X 를 -300mm/s 로수정합니다. 7. OK 를누릅니다. 23

27 EDEM 의 Gravity 를 RecurDyn 과동일한방향으로맞춰야합니다. 중력설정하기 1. Database 에서 Environment 를클릭합니다. 2. Gravity 를아래와같이수정합니다. X: 0 m/s 2 Y: m/s 2 Z: 0 m/s 2 모델저장하기 이로써 EDEM Creator 에서 Particle 생성과관련된모든설정이끝났습니다. EDEM 모델을 저장합니다. 24

28 EDEM Simulator 이제해석과관련된요소들을설정합니다. Simulator 설정하기 1. 리본메뉴에서 Simulator 아이콘을클릭합니다. 2. Time Step 에서 Auto Time Step 옵션을끕니다. 3. Fixed Time Step 을 30% 로설정합니다. 4. Simulation Grid 에서 Cell Size 를 3R 로설정합니다. Coupling 활성화하기 리본오른쪽상단에있는 Coupling Server 아이콘을클릭하여활성화시킵니다. 활성화가되면아래그림과같이변경됩니다. Co-simulation 하기위한준비를모두마쳤습니다. RecurDyn 과 Co-simulation 을하려면 EDEM 이 켜져있어야합니다. 프로그램을켜놓은채로다음장을진행합니다. 25

29 Chapter 6 Co-simulation 본장에서는 RecurDyn 과 EDEM 을사용하여동역학모델과입자간의거동을해석하기위한 Cosimulation 을수행합니다. 목적 본장에서는 RecurDyn 에서 Co-simulation 을수행하는방법을배우게됩니다. 150 분 예상소요시간 26

30 Co-simulation RecurDyn 에서 Co-simulation 진행하기 1. RecurDyn 을실행하여 4 장에서저장한모델을엽니다. 2. External SPI 탭의 EDEM 그룹에서 Connect 를활성화합니다. 3. Analysis 탭의 Simulation Type 그룹에서 Dyn/Kin 을클릭합니다. 4. General 탭에서아래와같이수정합니다. End Time: 10 Step: Parameter 탭에서 Maximum Time Step 을 1.e-004 으로설정합니다. 6. Simulate 버튼을클릭합니다. RecurDyn 과 EDEM 이 Co-simulation 을 진행합니다. 결과보기 Analysis 탭의 Animation Control 그룹에서 Play 버튼을눌러애니메이션을확인합니다. 27

31 EDEM Analyst EDEM 에서해석된결과를재생해봅니다. Simulator 설정하기 1. EDEM 리본메뉴에서 Analyst 아이콘을클릭합니다. Jump to start Animate forwards 2. Jump to start 아이콘을클릭하여 0 Frame 으로이동합니다. 3. Animate forwards 를클릭하여애니메이션을재생합니다. RecurDyn 과동일한애니메이션을확인할수있습니다. 28

32 Chapter 7 결과분석및검토 본장에서는 6 장에서수행한결과를 RecurDyn 의 Post Tool 을이용하여분석해봅니다. 목적 본장에서는 RecurDyn 에서 SPI Post Tool 을사용하는방법을배우게됩니다. 10 분 예상소요시간 29

33 Post Process RecurDyn 에서제공하는 Particle Post 기능을이용하여결과를분석해봅니다. Particle Sensor 생성하기 1. External SPI 탭의 Post-Process 그룹에서 Sensors 를클릭합니다. Particle Sensor 대화상자가나타납니다. 2. Add Box 를클릭합니다. 3. 아래정보를입력합니다. EDEM_1 Ground -540, 330, , -387, 160 P_Sensor1 이생성됩니다. 4. P_Sensor1 의색상을 Blue 로수정합니다. 5. 다시 Add Box 를클릭합니다. 6. 아래정보를입력합니다. EDEM_1 Container1-530, 110, , -60, 150 P_Sensor2 이생성됩니다. 7. P_Sensor2 의색상을 Red 로수정합니다. 8. 다시 Add Box 를클릭합니다. 9. 아래정보를입력합니다. EDEM_1 Container2 366, -270, , -377, 150 P_Sensor3 이생성됩니다. 10. P_Sensor3 의색상을 Green 으로수정합니다. 30

34 11. Update 를클릭합니다. 12. P_Sensor1 과 P_Sensor2 의 View 를클릭하여 Scope 를띄웁니다. 13. OK 를클릭합니다. 그림과같은위치에 Box 모양의 Sensor 가 3 개생성됩니다. Animation 을재생해보면 Box 안에 Particle 이들어오면하이라이트됩니다. 31

35 Viewer 의 Scope 결과를분석해봅니다. 먼저 P_Sensor1 의결과는전체공간에대한입자개수로입자의생성유입속도를알수있습니다. 대략 50 개 /sec 으로 EDEM 에서입력한 Generation Rate 와일치함을확인할수있습니다. 두번째 P_Sensor2 의결과는 Belt 에의해 Container1 에담기는입자개수입니다. 마지막 P_Sensor3 의결과는 Belt 에 담기지못하고떨어져나가 Container2 에 담기는입자개수입니다. 참고로, EDEM 에서입자들이생성될때 Random 한위치, 자세를갖도록설정되어있습니다. 따라서위 결과와미소하게다를수있습니다. Thanks for participating in this tutorial 32

Pinball Tutorial (Professional)

Pinball Tutorial (Professional) Pinball Tutorial (Professional) Copyright 2019 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea

More information

Water Sloshing (Particleworks)

Water Sloshing (Particleworks) Water Sloshing (Particleworks) Copyright 2019 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea and

More information

RFlexGen Crankshaft Tutorial (RFlexGen)

RFlexGen Crankshaft Tutorial (RFlexGen) RFlexGen Crankshaft Tutorial (RFlexGen) Copyright 2019 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of

More information

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Ball Return Tutorial (Professional) Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea

More information

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Driving J-Turn Tutorial (Tire) Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea and

More information

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the

Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Plasticity Bending Machine Tutorial (FFlex) Copyright 2018 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic

More information

Compliant Clutch Tutorial (FFlex)

Compliant Clutch Tutorial (FFlex) Compliant Clutch Tutorial (FFlex) Copyright 2019 FunctionBay, Inc. All rights reserved. User and training documentation from FunctionBay, Inc. is subjected to the copyright laws of the Republic of Korea

More information

Microsoft Word - ntasFrameBuilderInstallGuide2.5.doc

Microsoft Word - ntasFrameBuilderInstallGuide2.5.doc NTAS and FRAME BUILDER Install Guide NTAS and FRAME BUILDER Version 2.5 Copyright 2003 Ari System, Inc. All Rights reserved. NTAS and FRAME BUILDER are trademarks or registered trademarks of Ari System,

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 RecurDyn 의 Co-simulation 와 하드웨어인터페이스적용 2016.11.16 User day 김진수, 서준원 펑션베이솔루션그룹 Index 1. Co-simulation 이란? Interface 방식 Co-simulation 개념 2. RecurDyn 과 Co-simulation 이가능한분야별소프트웨어 Dynamics과 Control 1) RecurDyn

More information

NTD36HD Manual

NTD36HD Manual Upnp 사용 D7 은 UPNP 를지원하여 D7 의네크워크에연결된 UPNP 기기에별다른설정없이연결하여, 유무선으로네트워크상의연결된 UPNP 기기의콘텐츠를재생할수있습니다. TV 화면의 브라우저, UPNP 를선택하면연결가능한 UPNP 기기가표시됩니다. 주의 - UPNP 기능사용시연결된 UPNP 기기의성능에따라서재생되지않는콘텐츠가있을수있습니다. NFS 사용 D7

More information

슬라이드 1

슬라이드 1 CCS v4 사용자안내서 CCSv4 사용자용예제따라하기안내 0. CCS v4.x 사용자 - 준비사항 예제에사용된 CCS 버전은 V4..3 버전이며, CCS 버전에따라메뉴화면이조금다를수있습니다. 예제실습전준비하기 처음시작하기예제모음집 CD 를 PC 의 CD-ROM 드라이브에삽입합니다. 아래안내에따라, 예제소스와헤더파일들을 PC 에설치합니다. CD 드라이브 \SW\TIDCS\TIDCS_DSP80x.exe

More information

IRISCard Anywhere 5

IRISCard Anywhere 5 이 빠른 사용자 가이드는 IRISCard Anywhere 5 및 IRISCard Corporate 5 스캐너의 설치와 시작을 도와 드립니다. 이 스캐너와 함께 제공되는 소프트웨어는: - Cardiris Pro 5 및 Cardiris Corporate 5 for CRM (Windows 용) - Cardiris Pro 4 (Mac OS 용) Cardiris 의

More information

CD-RW_Advanced.PDF

CD-RW_Advanced.PDF HP CD-Writer Program User Guide - - Ver. 2.0 HP CD-RW Adaptec Easy CD Creator Copier, Direct CD. HP CD-RW,. Easy CD Creator 3.5C, Direct CD 3.0., HP. HP CD-RW TEAM ( 02-3270-0803 ) < > 1. CD...3 CD...5

More information

슬라이드 1

슬라이드 1 Delino EVM 용처음시작하기 - 프로젝트만들기 (85) Delfino EVM 처음시작하기앞서 이예제는타겟보드와개발홖경이반드시갖추어져있어야실습이가능합니다. 타겟보드 : Delfino EVM + TMS0F85 초소형모듈 개발소프트웨어 : Code Composer Studio 4 ( 이자료에서사용된버전은 v4..입니다. ) 하드웨어장비 : TI 정식 JTAG

More information

ISP and CodeVisionAVR C Compiler.hwp

ISP and CodeVisionAVR C Compiler.hwp USBISP V3.0 & P-AVRISP V1.0 with CodeVisionAVR C Compiler http://www.avrmall.com/ November 12, 2007 Copyright (c) 2003-2008 All Rights Reserved. USBISP V3.0 & P-AVRISP V1.0 with CodeVisionAVR C Compiler

More information

Office 365 사용자 가이드

Office 365 사용자 가이드 [ 여기에입력 ] Office 365 사용자가이드 OFFICE 365 모바일설정 목차 1. 모바일에메일계정추가하기... 2 2. Lync 2013 App 설치하기... 7 3. Office Mobile App 설치하기... 10 4. Office for ipad 설치하기... 16-1 - 모바일기기에 Office 365 를설정해보세요. 모바일기기에 Office

More information

Microsoft PowerPoint Android-SDK설치.HelloAndroid(1.0h).pptx

Microsoft PowerPoint Android-SDK설치.HelloAndroid(1.0h).pptx To be an Android Expert 문양세강원대학교 IT 대학컴퓨터학부 Eclipse (IDE) JDK Android SDK with ADT IDE: Integrated Development Environment JDK: Java Development Kit (Java SDK) ADT: Android Development Tools 2 JDK 설치 Eclipse

More information

슬라이드 1

슬라이드 1 전자정부개발프레임워크 1 일차실습 LAB 개발환경 - 1 - 실습목차 LAB 1-1 프로젝트생성실습 LAB 1-2 Code Generation 실습 LAB 1-3 DBIO 실습 ( 별첨 ) LAB 1-4 공통컴포넌트생성및조립도구실습 LAB 1-5 템플릿프로젝트생성실습 - 2 - LAB 1-1 프로젝트생성실습 (1/2) Step 1-1-01. 구현도구에서 egovframe>start>new

More information

ICAS CADWorx SPLM License 평가판설치가이드

ICAS CADWorx SPLM License 평가판설치가이드 ICAS CADWorx SPLM License 평가판설치가이드 CADWorx SPLM License 평가판설치가이드 설치권장사항 Operating System Compatibility ( 반드시 AutoCAD 가설치되어있어야합니다.) 추천시스템 3.0 GHz Intel Pentium IV or greater Windows XP Professional or later

More information

목차 윈도우드라이버 1. 매뉴얼안내 운영체제 (OS) 환경 윈도우드라이버준비 윈도우드라이버설치 Windows XP/Server 2003 에서설치 Serial 또는 Parallel 포트의경우.

목차 윈도우드라이버 1. 매뉴얼안내 운영체제 (OS) 환경 윈도우드라이버준비 윈도우드라이버설치 Windows XP/Server 2003 에서설치 Serial 또는 Parallel 포트의경우. 소프트웨어매뉴얼 윈도우드라이버 Rev. 3.03 SLP-TX220 / TX223 SLP-TX420 / TX423 SLP-TX400 / TX403 SLP-DX220 / DX223 SLP-DX420 / DX423 SLP-DL410 / DL413 SLP-T400 / T403 SLP-T400R / T403R SLP-D220 / D223 SLP-D420 / D423

More information

Copyright 2012, Oracle and/or its affiliates. All rights reserved.,.,,,,,,,,,,,,.,...,. U.S. GOVERNMENT END USERS. Oracle programs, including any oper

Copyright 2012, Oracle and/or its affiliates. All rights reserved.,.,,,,,,,,,,,,.,...,. U.S. GOVERNMENT END USERS. Oracle programs, including any oper Windows Netra Blade X3-2B( Sun Netra X6270 M3 Blade) : E37790 01 2012 9 Copyright 2012, Oracle and/or its affiliates. All rights reserved.,.,,,,,,,,,,,,.,...,. U.S. GOVERNMENT END USERS. Oracle programs,

More information

01장

01장 뇌를자극하는 Windows Server 2012 R2 부록 NAS4Free 의설치와환경설정 네트워크상에서저장공간이제공되는 NAS(Network Attached Storage) 환경을 VMware에서구성해야한다. 이책에서는그중 Unix 계열의운영체제이며무료로사용할수있는 NAS4Free 운영체제를설치하고사용할것이다. 결국지금설치하는 NAS4Free는쿼럼디스크와클러스터디스크를제공하는것이목적이다.

More information

Windows 8에서 BioStar 1 설치하기

Windows 8에서 BioStar 1 설치하기 / 콘텐츠 테이블... PC에 BioStar 1 설치 방법... Microsoft SQL Server 2012 Express 설치하기... Running SQL 2012 Express Studio... DBSetup.exe 설정하기... BioStar 서버와 클라이언트 시작하기... 1 1 2 2 6 7 1/11 BioStar 1, Windows 8 BioStar

More information

6. 설치가시작되는동안 USB 드라이버가자동으로로드됩니다. USB 드라이버가성공적으로로드되면 Setup is starting( 설치가시작되는중 )... 화면이표시됩니다. 7. 화면지침에따라 Windows 7 설치를완료합니다. 방법 2: 수정된 Windows 7 ISO

6. 설치가시작되는동안 USB 드라이버가자동으로로드됩니다. USB 드라이버가성공적으로로드되면 Setup is starting( 설치가시작되는중 )... 화면이표시됩니다. 7. 화면지침에따라 Windows 7 설치를완료합니다. 방법 2: 수정된 Windows 7 ISO Windows 7 설치및 PCIE RAID 설정정보 DK173 초판 11월 2016 A. Windows 7 및 USB 드라이버설치 칩셋사양에따라 Windows 7 설치중에 USB 키보드 / 마우스를사용하려면시스템에서 USB 드라이버를사전로드해야합니다. 이절에서는 USB 드라이버사전로드방법과 Windows 7 설치방법에대해서설명합니다. 방법 1: SATA ODD

More information

Microsoft PowerPoint SDK설치.HelloAndroid(1.5h).pptx

Microsoft PowerPoint SDK설치.HelloAndroid(1.5h).pptx To be an Android Expert 문양세강원대학교 IT 대학컴퓨터학부 개발환경구조및설치순서 JDK 설치 Eclipse 설치 안드로이드 SDK 설치 ADT(Androd Development Tools) 설치 AVD(Android Virtual Device) 생성 Hello Android! 2 Eclipse (IDE) JDK Android SDK with

More information

Install stm32cubemx and st-link utility

Install stm32cubemx and st-link utility STM32CubeMX and ST-LINK Utility for STM32 Development 본문서는 ST Microelectronics 의 ARM Cortex-M 시리즈 Microcontroller 개발을위해제공되는 STM32CubeMX 와 STM32 ST-LINK Utility 프로그램의설치과정을설명합니다. 본문서는 Microsoft Windows 7

More information

mariokart_manual_pdf_2

mariokart_manual_pdf_2 마리오 카트 7 1 안전을 위한 주의사항 게임 시작 방법 2 타이틀 메뉴 화면 3 데이터 저장에 관하여 조작 방법 4 기본 조작 5 드라이빙 테크닉 아이템 6 아이템 사용 방법 7 아이템 리스트 싱글 플레이 8 그랑프리 9 타임 어택 10 풍선 배틀 11 코인 배틀 로컬 통신 플레이 12 로컬 통신 대전의 시작 방법 인터넷 플레이 13 인터넷에 관한 주의사항

More information

PRO1_09E [읽기 전용]

PRO1_09E [읽기 전용] Siemens AG 1999 All rights reserved File: PRO1_09E1 Information and - ( ) 2 3 4 5 Monitor/Modify Variables" 6 7 8 9 10 11 CPU 12 Stop 13 (Forcing) 14 (1) 15 (2) 16 : 17 : Stop 18 : 19 : (Forcing) 20 :

More information

Product A4

Product A4 2 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 3 4 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 5 PI Increasing Performance PES PPSU PSU

More information

Microsoft Word - Modelsim_QuartusII타이밍시뮬레이션.doc

Microsoft Word - Modelsim_QuartusII타이밍시뮬레이션.doc Modelsim 과 Quartus II 를이용한설계방법 퀀텀베이스연구개발실, 경기도부천시원미구상동 546-2, 두성프라자 1-606 TEL: 032-321-0195, FAX: 032-321-0197, Web site: www.quantumbase.com 최근 Modelsim은 PC에포팅되어있는것에힘입어많은설계자들이사용하고있습니다이에 Modelsim을이용하여설계하고,

More information

ORANGE FOR ORACLE V4.0 INSTALLATION GUIDE (Online Upgrade) ORANGE CONFIGURATION ADMIN O

ORANGE FOR ORACLE V4.0 INSTALLATION GUIDE (Online Upgrade) ORANGE CONFIGURATION ADMIN O Orange for ORACLE V4.0 Installation Guide ORANGE FOR ORACLE V4.0 INSTALLATION GUIDE...1 1....2 1.1...2 1.2...2 1.2.1...2 1.2.2 (Online Upgrade)...11 1.3 ORANGE CONFIGURATION ADMIN...12 1.3.1 Orange Configuration

More information

마리오와 소닉 리우 올림픽™

마리오와 소닉 리우 올림픽™ 마리오와 소닉 리우 올림픽 1 사용하기 전에 준비하기 2 유저 콘텐츠에 대하여 3 인터넷으로 이용 가능한 기능 4 보호자 여러분께 5 amiibo란 시작하기 전에 6 게임 소개 7 게임 시작 방법 8 조작 방법 9 데이터 저장과 삭제 통신으로 더욱 즐기기 10 대전 모드 11 포켓 마라톤 12 기록 기타 13 사용 곡명과 작곡자 소개 14 플레이 정보 송신

More information

Chapter 1

Chapter 1 3 Oracle 설치 Objectives Download Oracle 11g Release 2 Install Oracle 11g Release 2 Download Oracle SQL Developer 4.0.3 Install Oracle SQL Developer 4.0.3 Create a database connection 2 Download Oracle 11g

More information

Copyrights and Trademarks Autodesk SketchBook Mobile (2.0.2) 2013 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc.,

Copyrights and Trademarks Autodesk SketchBook Mobile (2.0.2) 2013 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., Autodesk SketchBook Mobile Copyrights and Trademarks Autodesk SketchBook Mobile (2.0.2) 2013 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts

More information

Cubase AI installation guide

Cubase AI installation guide Steinberg Cubase AI 프로그램 및라이선스설치가이드 (2018. 1. 31) Ver. 1.0.0 1 목차 1. 계정만들기 2. Download access code 등록및 Activation Code 발급 3. Steinberg Download Assistant 다운로드및설치 4. Cubase AI 다운로드및설치 5. 라이선스활성화 (Activation)

More information

,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law),

,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), 1, 2, 3, 4, 5, 6 7 8 PSpice EWB,, ,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), ( ),,,, (43) 94 (44)

More information

11111111111111111111111111111111111111111111111111111111111111111111111111111

11111111111111111111111111111111111111111111111111111111111111111111111111111 서울시 금천구 가산동 448 대륭테크노타운 3차 301호 전화 : (02)838-0760 팩스 : (02)838-0782 메일 : support@gyrosoft.co.kr www.gyrosoft.co.kr www.gyro3d.com 매뉴얼 버전 : 1.00 (발행 2008.6.1) 이 설명서의 어느 부분도 자이로소프트(주)의 승인 없이 일부 또는 전부를 복제하여

More information

아이콘의 정의 본 사용자 설명서에서는 다음 아이콘을 사용합니다. 참고 참고는 발생할 수 있는 상황에 대처하는 방법을 알려 주거나 다른 기능과 함께 작동하는 방법에 대한 요령을 제공합니다. 상표 Brother 로고는 Brother Industries, Ltd.의 등록 상

아이콘의 정의 본 사용자 설명서에서는 다음 아이콘을 사용합니다. 참고 참고는 발생할 수 있는 상황에 대처하는 방법을 알려 주거나 다른 기능과 함께 작동하는 방법에 대한 요령을 제공합니다. 상표 Brother 로고는 Brother Industries, Ltd.의 등록 상 Android 용 Brother Image Viewer 설명서 버전 0 KOR 아이콘의 정의 본 사용자 설명서에서는 다음 아이콘을 사용합니다. 참고 참고는 발생할 수 있는 상황에 대처하는 방법을 알려 주거나 다른 기능과 함께 작동하는 방법에 대한 요령을 제공합니다. 상표 Brother 로고는 Brother Industries, Ltd.의 등록 상표입니다. Android는

More information

슬라이드 1

슬라이드 1 - 1 - 전자정부모바일표준프레임워크실습 LAB 개발환경 실습목차 LAB 1-1 모바일프로젝트생성실습 LAB 1-2 모바일사이트템플릿프로젝트생성실습 LAB 1-3 모바일공통컴포넌트생성및조립도구실습 - 2 - LAB 1-1 모바일프로젝트생성실습 (1/2) Step 1-1-01. 구현도구에서 egovframe>start>new Mobile Project 메뉴를선택한다.

More information

Windows Server 2012

Windows Server  2012 Windows Server 2012 Shared Nothing Live Migration Shared Nothing Live Migration 은 SMB Live Migration 방식과다른점은 VM 데이터파일의위치입니다. Shared Nothing Live Migration 방식은 Hyper-V 호스트의로컬디스크에 VM 데이터파일이위치합니다. 반면에, SMB

More information

Copyright 2012, Oracle and/or its affiliates. All rights reserved.,,,,,,,,,,,,,.,..., U.S. GOVERNMENT END USERS. Oracle programs, including any operat

Copyright 2012, Oracle and/or its affiliates. All rights reserved.,,,,,,,,,,,,,.,..., U.S. GOVERNMENT END USERS. Oracle programs, including any operat Sun Server X3-2( Sun Fire X4170 M3) Oracle Solaris : E35482 01 2012 9 Copyright 2012, Oracle and/or its affiliates. All rights reserved.,,,,,,,,,,,,,.,..., U.S. GOVERNMENT END USERS. Oracle programs, including

More information

Orcad Capture 9.x

Orcad Capture 9.x OrCAD Capture Workbook (Ver 10.xx) 0 Capture 1 2 3 Capture for window 4.opj ( OrCAD Project file) Design file Programe link file..dsn (OrCAD Design file) Design file..olb (OrCAD Library file) file..upd

More information

MF5900 Series MF Driver Installation Guide

MF5900 Series MF Driver Installation Guide 한국어 MF 드라이버설치설명서 사용자소프트웨어 CD-ROM................................................ 1.................................................................... 1..............................................................................

More information

LCD Display

LCD Display LCD Display SyncMaster 460DRn, 460DR VCR DVD DTV HDMI DVI to HDMI LAN USB (MDC: Multiple Display Control) PC. PC RS-232C. PC (Serial port) (Serial port) RS-232C.. > > Multiple Display

More information

CODESYS 런타임 설치과정

CODESYS 런타임 설치과정 CODESYS 런타임설치과정 CODESYS Control RTE / SoftMotion RTE Setup Web: www.altsoft.kr E-mail: altsoft@altsoft.kr Tel: 02-547-2344 목 차 CODESYS 런타임 - Control RTE, SoftMotion RTE... 2 다운로드및설치과정... 2 CODESYS EtherCAT

More information

TOOLS Software Installation Guide

TOOLS Software Installation Guide Steinberg TOOLS 소프트웨어설치안내서 정보 이소프트웨어및설치안내서는 Yamaha Corporation 이독점저작권을가지고있습니다. 제조사의사전동의없이어떠한방법으로든전체또는부분적으로소프트웨어를복사하거나이설치안내서를복제하는것은명백히금지됩니다. Steinberg/Yamaha 는소프트웨어및문서자료사용에관하여어떠한대변또는보증을하지않으며, 이설치안내서및소프트웨어사용결과에대하여책임있는것으로간주될수없습니다.

More information

ArcGIS Desktop 9.2 Install Guide

ArcGIS Desktop 9.2 Install Guide ArcGIS Server9.2 설치가이드 Installing ArcGIS Server 9.2 목차 1. 소개... 3 2. ArcGIS Server 설치시사전요구사항... 4 3. ArcGIS Server 9.2 설치준비... 6 4. ArcGIS Server 9.2 설치... 7 5. GIS Server Post Install... 11 6. Web Application

More information

Oracle VM VirtualBox 설치 VirtualBox에서 가상머신 설치 가상머신에 Ubuntu 설치

Oracle VM VirtualBox 설치 VirtualBox에서 가상머신 설치 가상머신에 Ubuntu 설치 Oracle VM VirtualBox 설치 VirtualBox에서 가상머신 설치 가상머신에 Ubuntu 설치 VirtualBox를 사용하기 위해서는 일단 https://www.virtualbox.org/wiki/downloads 사이트에서 윈도우용 버추얼박스 설치화일을 다운로드 해야합니다. Ubuntu를 사용하기 위해서는 Ubuntu 디스크 이미지 화일을 다운로드

More information

이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2014. SAS University Edition: Linux 용 설치 가이드 Cary, NC: SAS Institute Inc. SAS University Edition: Lin

이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2014. SAS University Edition: Linux 용 설치 가이드 Cary, NC: SAS Institute Inc. SAS University Edition: Lin SAS University Edition: Linux 용 설치 가이드 i 2014 년 6 월 17 일 이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2014. SAS University Edition: Linux 용 설치 가이드 Cary, NC: SAS Institute Inc. SAS University Edition:

More information

DE1-SoC Board

DE1-SoC Board 실습 1 개발환경 DE1-SoC Board Design Tools - Installation Download & Install Quartus Prime Lite Edition http://www.altera.com/ Quartus Prime (includes Nios II EDS) Nios II Embedded Design Suite (EDS) is automatically

More information

Remote UI Guide

Remote UI Guide Remote UI KOR Remote UI Remote UI PDF Adobe Reader/Adobe Acrobat Reader. Adobe Reader/Adobe Acrobat Reader Adobe Systems Incorporated.. Canon. Remote UI GIF Adobe Systems Incorporated Photoshop. ..........................................................

More information

< 목차 > Ⅰ. 개요 3 Ⅱ. 실시간스팸차단리스트 (RBL) ( 간편설정 ) 4 1. 메일서버 (Exchange Server 2007) 설정변경 4 2. 스팸차단테스트 10

< 목차 > Ⅰ. 개요 3 Ⅱ. 실시간스팸차단리스트 (RBL) ( 간편설정 ) 4 1. 메일서버 (Exchange Server 2007) 설정변경 4 2. 스팸차단테스트 10 (https://www.kisarbl.or.kr) < 목차 > Ⅰ. 개요 3 Ⅱ. 실시간스팸차단리스트 (RBL) ( 간편설정 ) 4 1. 메일서버 (Exchange Server 2007) 설정변경 4 2. 스팸차단테스트 10 Ⅰ. 개요 실시간스팸차단리스트 (RBL) 는메일서버를운영하는누구나손쉽게효과적으로스팸수신을차단하는데이용할수있도록한국인터넷진흥원 (KISA)

More information

Microsoft PowerPoint - HS6000 Full HD Subtitle Generator Module Presentation

Microsoft PowerPoint - HS6000 Full HD Subtitle Generator Module Presentation HS6000 Full HD Subtitle Generator Module High-performance Network DVR Solution Preliminary Product Overview (Without notice, following described technical spec. can be changed) AddPac Technology 2010,

More information

Microsoft Word - Armjtag_문서1.doc

Microsoft Word - Armjtag_문서1.doc ARM JTAG (wiggler 호환 ) 사용방법 ( IAR EWARM 에서 ARM-JTAG 로 Debugging 하기 ) Test Board : AT91SAM7S256 IAR EWARM : Kickstart for ARM ARM-JTAG : ver 1.0 ( 씨링크테크 ) 1. IAR EWARM (Kickstart for ARM) 설치 2. Macraigor

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 Autodesk Software 개인용 ( 학생, 교사 ) 다운로드가이드 진동환 (donghwan.jin@autodesk.com) Manager Autodesk Education Program - Korea Autodesk Education Expert 프로그램 www.autodesk.com/educationexperts 교육전문가프로그램 글로벌한네트워크 /

More information

API STORE 키발급및 API 사용가이드 Document Information 문서명 : API STORE 언어별 Client 사용가이드작성자 : 작성일 : 업무영역 : 버전 : 1 st Draft. 서브시스템 : 문서번호 : 단계 : Docum

API STORE 키발급및 API 사용가이드 Document Information 문서명 : API STORE 언어별 Client 사용가이드작성자 : 작성일 : 업무영역 : 버전 : 1 st Draft. 서브시스템 : 문서번호 : 단계 : Docum API STORE 키발급및 API 사용가이드 Document Information 문서명 : API STORE 언어별 Client 사용가이드작성자 : 작성일 : 2012.11.23 업무영역 : 버전 : 1 st Draft. 서브시스템 : 문서번호 : 단계 : Document Distribution Copy Number Name(Role, Title) Date

More information

Smart Power Scope Release Informations.pages

Smart Power Scope Release Informations.pages v2.3.7 (2017.09.07) 1. Galaxy S8 2. SS100, SS200 v2.7.6 (2017.09.07) 1. SS100, SS200 v1.0.7 (2017.09.07) [SHM-SS200 Firmware] 1. UART Command v1.3.9 (2017.09.07) [SHM-SS100 Firmware] 1. UART Command SH모바일

More information

Mango-E-Toi Board Developer Manual

Mango-E-Toi Board Developer Manual Mango-E-Toi Board Developer Manual http://www.mangoboard.com/ http://cafe.naver.com/embeddedcrazyboys Crazy Embedded Laboratory www.mangoboard.com cafe.naver.com/embeddedcrazyboys CRZ Technology 1 Document

More information

Hardware Manual TSP100

Hardware Manual TSP100 Trademark acknowledgments TSP: Star Micronics., Ltd. Notice All rights reserved. Reproduction of any part of this manual in any form whatsoever, without STAR s express permission is forbidden. The contents

More information

메뉴얼41페이지-2

메뉴얼41페이지-2 데이터 기반 맞춤형 성장관리 솔루션 스마트빌 플러스 은행계좌등록 은행계좌를 조회하여 등록합니다. 신용카드등록 신용카드를 조회하여 등록합니다. 금융정보 자동수집을 위하여 인증서이름, 아이디, 비밀번호를 등록합니다. 통합 자동 수집 금융정보 통합 자동수집을 실행합니다 은행계좌등록 은행계좌를 조회하여 등록합니다. 신용카드등록 신용카드를 조회하여

More information

View Licenses and Services (customer)

View Licenses and Services (customer) 빠른 빠른 시작: 시작: 라이선스, 라이선스, 서비스 서비스 및 주문 주문 이력 이력 보기 보기 고객 가이드 Microsoft 비즈니스 센터의 라이선스, 서비스 및 혜택 섹션을 통해 라이선스, 온라인 서비스, 구매 기록 (주문 기록)을 볼 수 있습니다. 시작하려면, 비즈니스 센터에 로그인하여 상단 메뉴에서 재고를 선택한 후 내 재고 관리를 선택하십시오. 목차

More information

B _02-M_Korean.indd

B _02-M_Korean.indd DNX740BT DNX740BTM DDX704BT DDX704BTM DDX604 DDX604M B64-476-0/0 (MW) DNX740BT/DNX740BTM/DDX704BT/DDX704BTM/DDX604/DDX604M [FM] [AM] [], [] [CRSC] FM FM [SEEK] 4 DNX740BT/DNX740BTM/DDX704BT/DDX704BTM/DDX604/DDX604M

More information

Studuino소프트웨어 설치

Studuino소프트웨어 설치 Studuino 프로그래밍환경 Studuino 소프트웨어설치 본자료는 Studuino 프로그래밍환경설치안내서입니다. Studuino 프로그래밍 환경의갱신에따라추가 / 수정될수있습니다. 목차 1. 소개... 1 2. Windows... 2 2.1. 프로그래밍환경설치... 2 2.1.1. 웹설치버전설치방법... 2 2.2. Studuino 프로그래밍환경실행...

More information

Microsoft PowerPoint - ICCAD_Analog_lec01.ppt [호환 모드]

Microsoft PowerPoint - ICCAD_Analog_lec01.ppt [호환 모드] Chapter 1. Hspice IC CAD 실험 Analog part 1 Digital circuit design 2 Layout? MOSFET! Symbol Layout Physical structure 3 Digital circuit design Verilog 를이용한 coding 및 function 확인 Computer 가알아서해주는 gate level

More information

PowerPoint Presentation

PowerPoint Presentation Experience Education Simple Steel Structure Session_ Contents Step Modeling Step Load & Boundary Step Perform Analysis Step 4 Perform Design Step 5 Generate Drawing Step 6 Generate Report Step 7 Export

More information

펑션베이 는 첨단의 공학기술을 함수의 형태로 제품에 담아 세상에 선보입니다. 펑션베이라는 이름은 함수의 function, 만의 bay의 합성어 인데, 이 이름에는 함수(function)들로 세상과 소통하는 만(bay)이 되고자 하는 의미가 있습니다. 펑션베이 로비는 이

펑션베이 는 첨단의 공학기술을 함수의 형태로 제품에 담아 세상에 선보입니다. 펑션베이라는 이름은 함수의 function, 만의 bay의 합성어 인데, 이 이름에는 함수(function)들로 세상과 소통하는 만(bay)이 되고자 하는 의미가 있습니다. 펑션베이 로비는 이 2015 Vol. 6 지속 성장가능한 제품개발을 위해 우리가 만들어 가야 할 특별기고 개발 그룹의 역할/비전 및 개발문화 2세대가 본 한국의 다물체 동역학과 미래 / 부경대학교, 손정현 교수 RecurDyn 사용자 인터뷰 1. RecurDyn 사용자 인터뷰 2. Contact을 이용한 트랙 해석사례 / 한화 종합연구소, 옥진규 기구파트장 사출 성형기의 동적

More information

Mentor_PCB설계입문

Mentor_PCB설계입문 Mentor MCM, PCB 1999, 03, 13 (daedoo@eeinfokaistackr), (kkuumm00@orgionet) KAIST EE Terahertz Media & System Laboratory MCM, PCB (mentor) : da & Summary librarian jakup & package jakup & layout jakup &

More information

Windows Server 8

Windows Server 8 Windows Server 8 Configuring a Highly Available iscsi Target 본문서에서는, 공유저장소를사용하여클러스터를구축하고, 구축된클러스터에 iscsi high-availability 인스턴스를생성합니다. 이러한환경에서, 클러스터 failover 동안에어플리케이션 IO 가중단없이지속적으로사용가능한지확인합니다. 이동철부장 2012-03-05

More information

소프트웨어공학 Tutorial #2: StarUML Eun Man Choi

소프트웨어공학 Tutorial #2: StarUML Eun Man Choi 소프트웨어공학 Tutorial #2: StarUML Eun Man Choi emchoi@dgu.ac.kr Contents l StarUML 개요 l StarUML 소개및특징 l 주요기능 l StarUML 화면소개 l StarUML 설치 l StarUML 다운 & 설치하기 l 연습 l 사용사례다이어그램그리기 l 클래스다이어그램그리기 l 순서다이어그램그리기 2

More information

Microsoft Word - windows server 2003 수동설치_non pro support_.doc

Microsoft Word - windows server 2003 수동설치_non pro support_.doc Windows Server 2003 수동 설치 가이드 INDEX 운영체제 설치 준비과정 1 드라이버를 위한 플로피 디스크 작성 2 드라이버를 위한 USB 메모리 작성 7 운영체제 설치 과정 14 Boot Sequence 변경 14 컨트롤러 드라이버 수동 설치 15 운영체제 설치 17 운영체제 설치 준비 과정 Windows Server 2003 에는 기본적으로

More information

chapter4

chapter4 Basic Netw rk 1. ก ก ก 2. 3. ก ก 4. ก 2 1. 2. 3. 4. ก 5. ก 6. ก ก 7. ก 3 ก ก ก ก (Mainframe) ก ก ก ก (Terminal) ก ก ก ก ก ก ก ก 4 ก (Dumb Terminal) ก ก ก ก Mainframe ก CPU ก ก ก ก 5 ก ก ก ก ก ก ก ก ก ก

More information

SBR-100S User Manual

SBR-100S User Manual ( 1 / 13 ) SBR-100S 모델에 대한 사용자 펌웨어 업그레이드 방법을 안내해 드립니다. SBR-100S 는 신규 펌웨어가 있을시 FOTA(자동업데이트) 기능을 통하여 자동 업그레이드가 되며, 필요시 사용자가 신규 펌웨어를 다운받아 수동으로 업그레이드 할 수 있습니다. 1. 준비하기 1.1 연결 장치 준비 펌웨어 업그레이드를 위해서는 SBR-100S

More information

ODS-FM1

ODS-FM1 OPTICAL DISC ARCHIVE FILE MANAGER ODS-FM1 INSTALLATION GUIDE [Korean] 1st Edition (Revised 4) 상표 Microsoft, Windows 및 Internet Explorer는 미국 및 / 또는 다른 국가에서 Microsoft Corporation 의 등록 상표입 Intel 및 Intel Core

More information

PRO1_04E [읽기 전용]

PRO1_04E [읽기 전용] Siemens AG 1999 All rights reserved File: PRO1_04E1 Information and S7-300 2 S7-400 3 EPROM / 4 5 6 HW Config 7 8 9 CPU 10 CPU : 11 CPU : 12 CPU : 13 CPU : / 14 CPU : 15 CPU : / 16 HW 17 HW PG 18 SIMATIC

More information

목차 1. 시스템요구사항 암호및힌트설정 ( 윈도우 ) JetFlash Vault 시작하기 ( 윈도우 ) JetFlash Vault 옵션 ( 윈도우 )... 9 JetFlash Vault 설정... 9 JetFlash Vault

목차 1. 시스템요구사항 암호및힌트설정 ( 윈도우 ) JetFlash Vault 시작하기 ( 윈도우 ) JetFlash Vault 옵션 ( 윈도우 )... 9 JetFlash Vault 설정... 9 JetFlash Vault 사용자매뉴얼 JetFlash Vault 100 ( 버전 1.0) 1 목차 1. 시스템요구사항... 3 2. 암호및힌트설정 ( 윈도우 )... 3 3. JetFlash Vault 시작하기 ( 윈도우 )... 7 4. JetFlash Vault 옵션 ( 윈도우 )... 9 JetFlash Vault 설정... 9 JetFlash Vault 찾아보기... 10 JetFlash

More information

슬라이드 1

슬라이드 1 강의 저장 프로그램 EPLUS 7.9 사용 설명서 컴버스테크 이-플러스(E-PLUS) v7.9 소개 이-플러스(E-PLUS) v7.9 프로그램은 판서 및 강의 저장 등 강의에 필요한 다양한 기능을 가지고 있는 소프트웨어입니다. 어떠한 판서 도구를 사용하더라도 부드러운 판서 인식이 가능하며 사용자가 필요한 기능만을 지정하여 활용 할 수 있는 사용자 지정 기능을

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 Reasons for Poor Performance Programs 60% Design 20% System 2.5% Database 17.5% Source: ORACLE Performance Tuning 1 SMS TOOL DBA Monitoring TOOL Administration TOOL Performance Insight Backup SQL TUNING

More information

tiawPlot ac 사용방법

tiawPlot ac 사용방법 tiawplot ac 매뉴얼 BORISOFT www.borisoft.co.kr park.ji@borisoft.co.kr HP : 00-370-077 Chapter 프로그램설치. 프로그램설치 3 2 Chapter tiawplot ac 사용하기.tiawPlot ac 소개 2.tiawPlot ac 실행하기 3. 도면파일등록및삭제 4. 출력장치설정 5. 출력옵션설정

More information

APOGEE Insight_KR_Base_3P11

APOGEE Insight_KR_Base_3P11 Technical Specification Sheet Document No. 149-332P25 September, 2010 Insight 3.11 Base Workstation 그림 1. Insight Base 메인메뉴 Insight Base Insight Insight Base, Insight Base Insight Base Insight Windows

More information

인디쓔피-IOM핸돜벁닄큐1014pdf, page 59 @ Preflight ( IOM핸돜벁닄큐__1014 )

인디쓔피-IOM핸돜벁닄큐1014pdf, page 59 @ Preflight ( IOM핸돜벁닄큐__1014 ) Publisher: International Organization for Migration 17, route des Morillons 1211 Geneva 19 Switzerland Tel: +41.22.717 91 11 Fax: +41.22.798 61 50 E-mail: hq@iom.int Internet: http://www.iom.int ISBN 978

More information

VPN.hwp

VPN.hwp Linksys VPN Router RV042&RV082 VPN Router 용 VPN 터널설정 한국어사용자설명서 V1.0 Table of Content 1 Gateway to Gateway 설정... 1 STEP 1 - Gateway to Gateway 터널생성하기... 1 STEP 2 - 터널정보입력하기... 1 STEP 3 - Gateway to Gateway

More information

Endpoint Protector - Active Directory Deployment Guide

Endpoint Protector - Active Directory Deployment Guide Version 1.0.0.1 Active Directory 배포가이드 I Endpoint Protector Active Directory Deployment Guide 목차 1. 소개...1 2. WMI 필터생성... 2 3. EPP 배포 GPO 생성... 9 4. 각각의 GPO 에해당하는 WMI 연결... 12 5.OU 에 GPO 연결... 14 6. 중요공지사항

More information

API 매뉴얼

API 매뉴얼 PCI-DIO12 API Programming (Rev 1.0) Windows, Windows2000, Windows NT and Windows XP are trademarks of Microsoft. We acknowledge that the trademarks or service names of all other organizations mentioned

More information

설치 순서 Windows 98 SE/Me/2000/XP 1 PC를 켜고 Windows를 시작합니다. 아직 컴퓨터에 프린터를 연결하지 마십시오. 2 PC에 P-S100 CD-ROM(프 린터 드라이버)을 삽입합니다. 3 설치 프로그램을 시작합니다. q CD-ROM의 PS1

설치 순서 Windows 98 SE/Me/2000/XP 1 PC를 켜고 Windows를 시작합니다. 아직 컴퓨터에 프린터를 연결하지 마십시오. 2 PC에 P-S100 CD-ROM(프 린터 드라이버)을 삽입합니다. 3 설치 프로그램을 시작합니다. q CD-ROM의 PS1 디지털 사진 프린터 P-S100 프린터 드라이버 설치 가이드 사용하는 컴퓨터에 따라 제공된 프린터 드라이버를 설치합니다. 설치 절차 에 대한 자세한 내용은 CD-ROM의 Readme 파일을 참조하십시오. 작동 환경 Windows 호환 모델: IBM PC/AT 및 호환품 운영 체제: Windows 98 SE/Me/2000/XP (Windows 98 SE/Me/2000/XP

More information

<4D F736F F F696E74202D C61645FB3EDB8AEC7D5BCBA20B9D720C5F8BBE7BFEBB9FD2E BC8A3C8AF20B8F0B5E55D>

<4D F736F F F696E74202D C61645FB3EDB8AEC7D5BCBA20B9D720C5F8BBE7BFEBB9FD2E BC8A3C8AF20B8F0B5E55D> VHDL 프로그래밍 D. 논리합성및 Xilinx ISE 툴사용법 학습목표 Xilinx ISE Tool 을이용하여 Xilinx 사에서지원하는해당 FPGA Board 에맞는논리합성과정을숙지 논리합성이가능한코드와그렇지않은코드를구분 Xilinx Block Memory Generator를이용한 RAM/ ROM 생성하는과정을숙지 2/31 Content Xilinx ISE

More information

1 Nov-03 CST MICROWAVE STUDIO Microstrip Parameter sweeping Tutorial Computer Simulation Technology

1   Nov-03 CST MICROWAVE STUDIO Microstrip Parameter sweeping Tutorial Computer Simulation Technology 1 CST MICROWAVE STUDIO Microstrip Parameter sweeping Tutorial Computer Simulation Technology wwwcstcom wwwcst-koreacokr 2 1 Create a new project 2 Model the structure 3 Define the Port 4 Define the Frequency

More information

슬라이드 1

슬라이드 1 1 < 목차 > 1. SYSMAC Gateway 설정 -------------- 3 2. Network Configurator 수동설정 -------------- 23 3. Tag Status Area 설정방법 --------------------- 30 2 1. SYSMAC Gateway 설정 1) 시작 > 프로그램 > OMRON > SYSMAC Gateway

More information

PowerChute Personal Edition v3.1.0 에이전트 사용 설명서

PowerChute Personal Edition v3.1.0 에이전트 사용 설명서 PowerChute Personal Edition v3.1.0 990-3772D-019 4/2019 Schneider Electric IT Corporation Schneider Electric IT Corporation.. Schneider Electric IT Corporation,,,.,. Schneider Electric IT Corporation..

More information

경우 1) 80GB( 원본 ) => 2TB( 복사본 ), 원본 80GB 는 MBR 로디스크초기화하고 NTFS 로포맷한경우 복사본 HDD 도 MBR 로디스크초기화되고 80GB 만큼포맷되고나머지영역 (80GB~ 나머지부분 ) 은할당되지않음 으로나온다. A. Window P

경우 1) 80GB( 원본 ) => 2TB( 복사본 ), 원본 80GB 는 MBR 로디스크초기화하고 NTFS 로포맷한경우 복사본 HDD 도 MBR 로디스크초기화되고 80GB 만큼포맷되고나머지영역 (80GB~ 나머지부분 ) 은할당되지않음 으로나온다. A. Window P Duplicator 는기본적으로원본하드디스크를빠르게복사본하드디스크에복사하는기능을하는것입니다.. 복사본 하드디스크가원본하드디스크와똑같게하는것을목적으로하는것이어서저용량에서고용량으로복사시몇 가지문제점이발생할수있습니다. 하드디스크는사용하려면, 디스크초기화를한후에포맷을해야사용가능합니다. Windows PC는 MBR과 GPT 2 개중에 1개로초기화합니다. -Windows

More information

OnTuneV3_Manager_Install

OnTuneV3_Manager_Install OnTuneV3.1 Manager 설치하기 # 사전준비사항 - Manager Version 3.1.6-2010-06-21 TeemStone 1. OnTune Manager를설치할 NT 서버 - Windows 2000, Windows 2003, Windows 2008, Windows XP, Windows Vista, Windows 7 등 Windows 2000이후모든

More information

server name>/arcgis/rest/services server name>/<web adaptor name>/rest/services ArcGIS 10.1 for Server System requirements - 지

server name>/arcgis/rest/services  server name>/<web adaptor name>/rest/services ArcGIS 10.1 for Server System requirements - 지 ArcGIS for Server (Windows) 설치가이드 ArcGIS 10.2 for Server 설치변경사항 1 설치 간편해진설치 -.Net Framework나 Java Runtime 요구하지않음 - 웹서버 (IIS, WebSphere ) 와별도로분리되어순수하게웹서비스기반의 GIS 서버역할 - ArcGIS Server 계정을이용한서비스운영. 더이상 SOM,

More information

4 CD Construct Special Model VI 2 nd Order Model VI 2 Note: Hands-on 1, 2 RC 1 RLC mass-spring-damper 2 2 ζ ω n (rad/sec) 2 ( ζ < 1), 1 (ζ = 1), ( ) 1

4 CD Construct Special Model VI 2 nd Order Model VI 2 Note: Hands-on 1, 2 RC 1 RLC mass-spring-damper 2 2 ζ ω n (rad/sec) 2 ( ζ < 1), 1 (ζ = 1), ( ) 1 : LabVIEW Control Design, Simulation, & System Identification LabVIEW Control Design Toolkit, Simulation Module, System Identification Toolkit 2 (RLC Spring-Mass-Damper) Control Design toolkit LabVIEW

More information

MAX+plus II Getting Started - 무작정따라하기

MAX+plus II Getting Started - 무작정따라하기 무작정 따라하기 2001 10 4 / Version 20-2 0 MAX+plus II Digital, Schematic Capture MAX+plus II, IC, CPLD FPGA (Logic) ALTERA PLD FLEX10K Series EPF10K10QC208-4 MAX+plus II Project, Schematic, Design Compilation,

More information

이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2015. SAS University Edition: Amazon Web Services 용 설치 가이드 Cary, NC: SAS Institute Inc. SAS Universit

이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2015. SAS University Edition: Amazon Web Services 용 설치 가이드 Cary, NC: SAS Institute Inc. SAS Universit SAS University Edition: Amazon Web Services 용 설치 가이드 i 2014 년 6 월 17 일 이 설명서의 올바른 참고문헌 인용은 다음과 같습니다. SAS Institute Inc. 2015. SAS University Edition: Amazon Web Services 용 설치 가이드 Cary, NC: SAS Institute

More information

Interstage5 SOAP서비스 설정 가이드

Interstage5 SOAP서비스 설정 가이드 Interstage 5 Application Server ( Solaris ) SOAP Service Internet Sample Test SOAP Server Application SOAP Client Application CORBA/SOAP Server Gateway CORBA/SOAP Gateway Client INTERSTAGE SOAP Service

More information

Title Here

Title Here INNOWATCH V3.0.4 IPLAYBACK 설치매뉴얼 작성일 : 2015/04/20 최근업데이트 : 2016/06/27 Software Version : 3.0.4 문서관리 수정내역 일자작업자버전수정내용 2015/05/14 김창희양식수정 2016/05/20 김진규 N/A Preinstall 내용수정, 문서양식변경 검토자 이름 이영상 지위 기술본부이사 Distribution

More information

VOL.76.2008/2 Technical SmartPlant Materials - Document Management SmartPlant Materials에서 기본적인 Document를 관리하고자 할 때 필요한 세팅, 파일 업로드 방법 그리고 Path Type인 Ph

VOL.76.2008/2 Technical SmartPlant Materials - Document Management SmartPlant Materials에서 기본적인 Document를 관리하고자 할 때 필요한 세팅, 파일 업로드 방법 그리고 Path Type인 Ph 인터그래프코리아(주)뉴스레터 통권 제76회 비매품 News Letters Information Systems for the plant Lifecycle Proccess Power & Marine Intergraph 2008 Contents Intergraph 2008 SmartPlant Materials Customer Status 인터그래프(주) 파트너사

More information

H3050(aap)

H3050(aap) USB Windows 7/ Vista 2 Windows XP English 1 2 3 4 Installation A. Headset B. Transmitter C. USB charging cable D. 3.5mm to USB audio cable - Before using the headset needs to be fully charged. -Connect

More information

슬라이드 1

슬라이드 1 1 도구 개요 2 도구 설치 방법 3 도구 기능 소개 4 도구 활용 예제 5 FAQ 6 도구 평가 7 용어집 목차 1. 도구 개요 2. 도구 설치 방법 2.1 OpenProj 다운로드 2.2 OpenProj 설치하기 4. 도구 활용 예제 4.1 예제 설명 4.2 일정 관리 4.3 인적 자원 관리 4.4 프로젝트 진행 4.5 프로젝트 변경 관리 3.1 OpenProj

More information