CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ПРЕД

Transcription

1 KF Micro Component System OWNER S MANUAL ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

2 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ПРЕДОСТЕРЕЖЕНИЕ Использование органов управления или произведение настроек или выполнение процедур, не указанных в данной инструкции, может отразиться на выделении опасной радиации. The laser component in this product is capable of emitting radiation exceeding the limit for Class 1. Лазерный компонент данного изделия может выделять радиацию, превышающую ограниченный уровень радиации для Класса 1. LASER Specification: Class 1 LASER Product Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm (BDs) Laser output: max. 1 mw LASER Технические характеристики: Класс 1 LASER продукт Длина волны: 790 nm (CD)/658 nm (DVD)/405 nm (BD) Выходная мощность лазера: не более 1 мвт CAUTION:INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. DANGER: INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO THE BEAM. i

3 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances. Top: 10 cm Rear: 10 cm Sides: 10 cm 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: Other components, as they may cause damage and/or discoloration on the surface of this unit. Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. 7 Do not plug in this unit to a wall outlet until all connections are complete. 8 Do not operate this unit upside-down. It may overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or this unit during a lightning storm. 14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 16 Be sure to read the TROUBLESHOOTING section on common operating errors before concluding that this unit is faulty. 17 Before moving this unit, press to set this unit to the standby mode, and disconnect the AC power plug from the wall outlet. 18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power cable from the outlet, then leave this unit alone. 19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave this unit alone for cooling. 20 Install this unit near the AC outlet and where the AC power plug can be reached easily. 21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 22 Excessive sound pressure from earphones and headphones can cause hearing loss. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into the wall outlet, do not place your eyes close to the opening of the disc tray and other openings to look into inside. WARNING DO NOT TOUCH THIS UNIT WHEN IT IS USED CONTINUOUSLY AT HIGH VOLUME BECAUSE THE BOTTOM OF THIS UNIT MAY BECOME HOT. IT MAY LEAD TO INJURIES SUCH AS BURNS, ETC. ii En

4 CONTENTS INTRODUCTION WHAT YOU CAN DO WITH THIS UNIT... 2 SUPPLIED PARTS... 2 ABOUT DISCS AND FILES... 3 Types of discs/files that can be used with this unit... 3 Loading a disc... 4 Disc precautions... 4 Notice for watching 3D video images... 4 FRONT PANEL AND BASIC OPERATION... 5 REMOTE CONTROL... 6 Installing the batteries in the remote control... 9 Using the remote control... 9 PREPARATIONS CONNECTION Connecting component system to this unit Other connection Connecting to a TV HDMI connection Video connection NETWORK AND USB CONNECTION Connecting to the NETWORK terminal Connecting to the USB port OPERATIONS INITIAL WIZARD/EASY SETUP Setting with the Initial Wizard/Easy Setup BASIC OPERATION Basic operation using HOME/MEDIA menu Playing back photo/music/video Using network content Playing videos from YouTube Basic operation without HOME/MEDIA menu Operation for ipod Operation for CDs ADVANCED PLAYBACK OPERATION On Screen menu Status menu Using Bookmark Program play Using search Enjoying BONUSVIEW and BD-Live LISTENING TO FM RADIO STATIONS Tuning to radio stations Presetting radio stations Selecting preset radio stations (Preset tuning) Displaying Radio Data System information (Russia model only) USING USEFUL FUNCTIONS Using option menu on the front panel display Setting the clock/timer and sleep timer Operating this unit by TV remote control (the HDMI control function) SETTINGS SETUP MENU...31 Operation for SETUP menu General Setting Display Setting Audio Setting About the video output formats SOFTWARE UPGRADE...40 Upgrading the software ADDITIONAL INFORMATION TROUBLESHOOTING...41 General Radio reception ipod USB Disc playback Remote control Network Messages on the screen Others GLOSSARY...48 SPECIFICATIONS...50 About this manual This manual describes how to operate this unit using a remote control except when it is not available. Some of these operations are also available using the front panel buttons. Notes contain important information about safety and operating instructions. y indicates a tip for your operation. ipod described in this manual may also refer to iphone or ipad. This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority. The icons used in this manual Icons are used to indicate available buttons/functions for a particular format. BD : BD-Video DVD : DVD-Video, DVD-VR, DVD+VR CD : Audio CD VIDEO : AVCHD, WMV MUSIC : MP3, WMA, WAV PHOTO : JPEG ADDITIONAL INTRODUCTION PREPARATIONS OPERATIONS SETTINGS INFORMATION English 1 En

5 INTRODUCTION WHAT YOU CAN DO WITH THIS UNIT Play back a commercially-released Blu-ray Disc /DVD/CD *1 \ p. 21 In addition to a Blu-ray Disc (BD disc), this unit also supports playback of a variety of other discs. Play back BONUSVIEW, BD-Live, etc. *1 \ p. 24 You can enjoy additional movies on the latest BD discs. Play back Video, Music, Photo files on a disc/usb memory device/ ipod/iphone/ipad*1 Files recorded on discs/usb memory devices/ipod/iphone/ipad can be played back with this unit. \ p. 15 Play back Video, Music, Photo files on a Home Network Server*1,2 \ p. 18 PC contents can be played back with TV by connecting this unit to a network server. Play back YouTube contents on the Internet *2 \ p. 18 You can instantly enjoy YouTube contents on the Internet with this unit. Receive FM Radio stations and Radio Data System information \ p. 25 (Russia model only) You can enjoy listening to FM radio stations with this unit. Also when the Radio Data System broadcasting station is received, you can display Radio Data system information on the front panel display of the unit (Russia model only). Perform the Initial Wizard/Easy Setup \ p. 14 You can easily set for language, resolution, screen aspect ratio with the Initial Wizard/Easy Setup screen. Operate with the TV remote control \ p. 29 Connecting devices with an HDMI cable, you can control devices with a single remote control using the HDMI control function. Play back high-quality virtual surround sounds by AIR SURROUND XTREME You can enjoy Yamaha s exclusive AIR SURROUND XTREME that reproduces high-quality virtual surround sounds. \ p. 16 *1 For details on playable discs and files, refer to page 3. *2 Network setting is needed to use this function. Make sure you have all of the following items. SUPPLIED PARTS Remote control Batteries ( 2) Indoor FM antenna *3 Composite video (AAA, R03, UM-4) cable (1.5m) * 3 The supplied indoor FM antenna differs depending on your model. 2 En

6 ABOUT DISCS AND FILES Types of discs/files that can be used with this unit 12 cm and 8 cm discs can be played back in this unit. Do not use an 8 cm to 12 cm adapter. Use discs that conform to compatible standards as indicated by the presence of official logos on the disc label. Playback of discs not complying with these standards is not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back. Disc Type BD-ROM/BD-R/ BD-RE Recording Format BD-Video -- DVD-ROM DVD-Video -- DVD-R/DVD-R DL/ DVD-RW DVD+R/DVD+R DL/DVD+RW DVD-Video/DVD- VR/AVCHD/Data Disc DVD-Video/ DVD+VR/AVCHD/ Data Disc Data Format WMV/MP3/WAV/ WMA/JPEG WMV/MP3/WAV/ WMA/JPEG CD-ROM CDDA/HDCD -- CD-R/CD-RW CDDA/Data Disc WMV/MP3/WAV/ WMA/JPEG USB -- WMV/MP3/WAV/ WMA/JPEG Network -- WMV/MP3/WMA/ WAV/JPEG Region management information Destination BD-Video DVD-Video Asia Region code A or ALL Region number 3 or ALL Central and South America Korea Region code A or ALL Region code A or ALL 3 ALL Region number 4 or ALL 4 ALL Region number 3 or ALL 3 ALL Region management information Destination BD-Video DVD-Video Europe Region code B or ALL Region number 2 or ALL Australia Russia China Region code B or ALL Region code C or ALL Region number 4 or ALL Region number 5 or ALL BD/DVD video players and discs have region codes, which dictate the regions in which a disc can be played. BD/DVD Video operations and functions may be different from the explanations in this manual and some operations may be prohibited due to disc manufacturer s settings. If a menu screen or operating instructions are displayed during playback of a disc, follow the operating procedure displayed. Notes Region code C or ALL 2 ALL 4 ALL 5 ALL Region number 6 or ALL ALL Playback for some of the discs in the left side column tables may not be possible depending on the disc. Finalize all recording media that is played back in this unit. Finalize refers to a recorder processing a recorded disc so that it will play in other players/recorders as well as this unit. Only finalized discs will play back in this unit. (This unit does not have a function to finalize discs.) Playback of all files on the disc, USB memory device and network is not guaranteed. A copyright protected file cannot be played back via a USB memory device and network. MP3/WMA audio file requirement Sampling frequency: within khz (MP3/WMA), LPCM 44.1 khz/16 bit/stereo (WAV) Bitrate: within kbps (MP3), kbps (WMA) WMV file requirement WMV9, maximum resolution is 1,920 1,080. INTRODUCTION English 3 En

7 ABOUT DISCS AND FILES Loading a disc Insert the disc with the label facing up. In case of the disc recorded on both sides, face down the side you want to play back. Notes Playback may begin automatically, depending on the disc and setting of this unit. The menu may be displayed first, depending on the disc. The disc load time may vary depending on the disc. Disc precautions Do not touch the surface of the disc. Hold a disc by its edge (and the center hole). Do not use a pencil or pointed marker to write on the disc. Do not put a tape, seal, glue, etc., on a disc. Do not use a protective cover to prevent scratches. Do not load more than one disc into this unit at one time. This can cause damage to both this unit and the discs. Do not insert any foreign objects into the disc slot. Do not load a cracked, warped, or glued disc. Do not expose a disc to direct sunlight, high Caution temperature, high humidity, or a lot of dust. Notice for watching 3D video images Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images. We recommend that all viewers take regular breaks while watching 3D video images. If you experience any discomfort, stop watching the 3D video images until the discomfort subsides. Consult a doctor if you experience severe discomfort. Read the owner s manuals (BD disc and TV) and/or the caution messages that appear on the TV carefully. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images. Adults should supervise young children to ensure they follow the recommendations described above. If a disc becomes dirty, wipe it with a clean, dry cloth from the center out to the edge. Do not use record cleaner or paint thinner. To avoid malfunction, do not use a commercially available lens cleaner. 4 En

8 FRONT PANEL AND BASIC OPERATION y This unit has an automatic standby function. When the source is set to Disc/USB/Network, this unit automatically switches to standby mode if it is left turned on for 1 hour without playback or any other operation being performed. When the source is NOT set to Disc/USB/Network, this unit automatically switches to standby mode if it is left turned on for between 1 to 8 hours without playback or any other operation being performed according to the setting in SETUP menu (p. 34). (on/standby): Turns this unit on/ Sets to standby mode. TIMER indicator: (p. 28, 29) Disc tray INPUT: Selects an input source. INPUT TIMER PHONES Front panel display: (p. 27) USB ipod iphone ipod USB port: (p. 11, 13) PHONES: Connecting headphones No sound is output from the speakers when headphones are connected. PRESET VOLUME Down : Stops playback. : Opens/Closes the disc tray. : Starts/Pauses playback. VOLUME / : Skips backward and forward/press and hold to rewind and fast-forward. PRESET < >: Selects a preset station. Up INTRODUCTION English 5 En

9 REMOTE CONTROL Note will appear on the top left corner of the screen when the pressed button is not available A B C D E F PROGRAM MARKER DIGEST ZOOM CLEAR DISPLAY OPTION TOP MENU RETURN DIMMER ipod DISC USB NET SETUP HOME ENTER SEARCH SLEEP TIMER SURROUND MUTE VOLUME ON SCREEN PIP SUBTITLE AUDIO MEMORY SHUFFLE STATUS REPEAT A B POP-UP MENU TUNING PRESET TV AUX TUNER G H I J K L M N O P Q R S 1 Infrared signal transmitter (p. 9) 2 MARKER DVD VIDEO : Sets Bookmark at a specified point of a movie (p. 23). After Bookmark is set, press DIGEST to select the set point you want to jump to. You can set up to 12 Bookmarks. 3 : Opens/Closes the disc tray. 4 PROGRAM DVD CD : Sets the order of playback (p. 23). You can set up to 15 tracks of an audio disc or titles/ chapters of a DVD-Video disc. 5 Numeric buttons: Enters numbers, or during playback, jumps to the track/chapter corresponding to the number you input. These buttons may not be available depending on the disc type and playback condition. 6 CLEAR: Clears entered number/set item. 7 DISPLAY: Switches the information shown on the front panel display (p. 20, 26). 8 SETUP: Displays SETUP menu screen (p. 31). 9 OPTION: Enters option menu mode (p. 27). 0 HOME: Displays HOME menu screen (p. 16). A STATUS: Displays the playback information on the screen (p. 22). B DIMMER: Changes brightness of the front panel display. Choose brightness between bright or dim by pressing this button repeatedly. C SUBTITLE BD DVD VIDEO : Changes subtitle languages (p. 49) if available. You can also select this item from On Screen menu (p. 21). D PIP BD : Turns on/off the Picture in Picture (p. 24). PIP Mark ( ) is displayed on the screen when this function is available. You can also select this item from On Screen menu (p. 21). E Note PIP Mark is displayed only when [PIP Mark] is set to [On] (p. 35). REPEAT BD DVD CD VIDEO MUSIC PHOTO : Selects repeat mode. Repeat mode shown below will change each time you press the button (p. 20, 22). : Repeats the title being played back. : Repeats the chapter being played back. : Repeats the folder being played back. : Repeats all tracks/files on the disc/folder. : Repeats the track/file being played back. F SHUFFLE DVD CD VIDEO MUSIC PHOTO : Selects shuffle play mode (p. 20, 21). G DIGEST PHOTO : Shows 12 photo thumbnails. When thumbnails are displayed, you can proceed to the next/ previous page with /. DVD VIDEO : Displays Bookmark select bar (p. 23). H : Turns this unit on or sets it to standby mode. 6 En

10 REMOTE CONTROL I ZOOM DVD VIDEO PHOTO : Zooms in/out. The size of the screen will change each time you press the button (zoom in/out: 3 steps each). J Color buttons BD : Use these buttons according to onscreen instructions. K SLEEP: Sets to sleep mode (p. 29). L TIMER: Sets to timer mode (p. 28). M SURROUND: Turns on/off surround playback mode for the speakers (p. 16). (Does not affect headphone sound.) N Volume control buttons: Controls the volume level (p. 16). Press MUTE to turn off the volume. Press again to resume the volume. O SEARCH BD DVD CD VIDEO MUSIC : Jumps to a specified point during playback. For details on this function, refer to Using search (p. 23). You can also select this item from Status menu (p. 22). P AUDIO BD DVD : Changes the audio language or format. You can also select from On Screen menu (p. 21). Q FM control buttons TUNING << / >>: Starts manual tuning. Press and hold to start automatic tuning (p. 25). PRESET < / >: Selects preset station (p. 25). MEMORY: Starts preset tuning and stores preset stations (p. 25). R A/B BD DVD CD VIDEO MUSIC : Plays back a specific part you want to repeat. 1 Press A/B at the scene where you want to set the start point. [A-] is displayed on the screen. 2 Press A/B again at the scene where you want to set the end point. [A-B] is displayed on the screen. Repeat playback starts. 3 To cancel the repeat playback, press A/B. [A-B] disappears and the repeat playback is finished. Note This function cannot be performed depending on the specifications of the disc. S Input select buttons: Selects the input source (p. 15, 19, 25). Continued to the next page. \ INTRODUCTION English 7 En

11 REMOTE CONTROL T TOP MENU BD DVD : Displays the top menu screen (p. 49) if the disc contains a menu. Select the desired item using 5/a/2/3 and ENTER. PROGRAM MARKER DIGEST ZOOM SLEEP Note Specific operations may be different depending on the disc. Follow the instructions of each menu screen. TIMER SURROUND U Cursor buttons (5/a/2/3): Moves to select the focused item. ENTER: Confirms the focused menu/item. CLEAR SEARCH MUTE V RETURN: Returns to the previous menu or screen, etc. t DISPLAY OPTION TOP MENU SETUP HOME VOLUME POP-UP MENU W W POP-UP/MENU BD DVD : Displays pop-up menu. The menu contents displayed vary depending on the disc. For details on how to see and operate the pop-up menu, refer to the manual for the disc. The top menu screen may be displayed by pressing POP-UP/MENU depending on the disc. U V ENTER RETURN ON SCREEN TUNING PRESET DIMMER STATUS PIP SUBTITLE AUDIO MEMORY SHUFFLE REPEAT A B ipod TV AUX TUNER DISC USB NET X Y X ON SCREEN: Displays On Screen menu (p. 21). Y Control buttons BD DVD CD VIDEO MUSIC PHOTO : : Plays back contents. : Stops playback. To stop playback completely, press this button twice. : Pauses playback. BD DVD CD VIDEO MUSIC : / : Skips backward/forward. / : Press for instant search/replay. Instant search skips the content 30 seconds. Instant replay replays the content from 10 seconds before. BD DVD CD VIDEO MUSIC : / : Searches backward/forward. The search speed will change each time you press the button (search backward/ forward: 5 steps each). Press to resume normal playback. PHOTO : / : Changes the speed of a slide show (slower/ faster: 3 steps). Note Depending on the disc, this unit resumes playback from the point where the unit was previously stopped. To play back from the beginning, press and then press. 8 En

12 INPUT TIMER PHONES USB ipod iphone ipod PRESET VOLUME REMOTE CONTROL Installing the batteries in the remote control Notes on batteries Change both batteries when the operation range of the remote control decreases. Use AAA, R03, UM-4 batteries. Make sure that the polarities are correct. Refer to the illustration inside the battery compartment. Remove the batteries if the remote control is not to be used for an extended period of time. Do not use old batteries together with new ones. Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations. Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor immediately. When not planning to use the remote control for long periods of time, remove the batteries from the remote control. Do not charge or disassemble the supplied batteries. Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation. Within 6 m (20 feet) 30 Notes The area between the remote control and this unit must be clear of large obstacles. Do not spill water or other liquids on this remote control. Do not drop the remote control. Do not leave or store the remote control in the following types of conditions: high humidity, such as near a bath high temperature, such as near a heater or a stove extremely low temperatures dusty places. Do not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp; otherwise, the remote control may not work properly. If necessary, position the system away from direct lighting. 30 INTRODUCTION English 9 En

13 PREPARATIONS CONNECTION Connecting component system to this unit Make sure you read the following procedure and note carefully before connecting the system. Connecting the system 1 Connect the speaker terminals (L) of this unit to the speaker terminals of the left speaker and the speaker terminals (R) of this unit to the speaker terminals of the right speaker using the speaker cables supplied with the speaker set (NS-BP150). 2 Connect the supplied FM antenna to the FM jack. Right speaker (NS-BP150) Left speaker (NS-BP150) MD player etc. RCA stereo cable Be sure to remove insulation from the end of each speaker cable. SPEAKERS R L Subwoofer 6Ω MIN. /SPEAKER AUX OUTPUT L VIDEO NETWORK ANTENNA FM 75Ω HDMI R AUDIO IN SUBWOOFER USB This unit (BRX-750) Video connection (p. 12) HDMI connection (p. 12) USB connection (p. 13) Network connection (p. 13) 10 En

14 USB ipod iphone ipod CONNECTION CAUTION Do not connect this unit or other components to the main power until all connections between components are complete. Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage the unit and/or the speakers. All connections must be correct: L (left) to L, R (right) to R, + to + and to. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Also, refer to the owner s manual for each of your components. Notes When connecting speakers other than NS-BP150, use speakers having more than 6Ω impedance. If there is a problem of weak radio wave reception in your area or you want to improve radio reception, we recommend that you use commercially available outdoor antennas. For details, consult the nearest authorized Yamaha dealer or service center. Other connection Connecting ipod You can enjoy music stored in your ipod by connecting it to this unit. Note This unit is compatible with ipod classic, ipod nano (2nd, 3rd, 4th, 5th and 6th generation), ipod touch (1st, 2nd, 3rd, and 4th generation), iphone, iphone 3G/3GS, iphone 4, and ipad. Notes USB port Make sure the USB cable is connected securely between your ipod and this unit. Connect your ipod to the front USB port of this unit. The rear USB port is not compatible with your ipod. Connecting the power cable After you made all connections, connect the power cables of this unit. To an AC wall outlet MAINS 6Ω MIN. /SPEAKER AUX OUTPUT L VIDEO HDMI R AUDIO IN R SPEAKERS SUBWOOFER L NETWORK USB ANTENNA FM 75Ω PREPARATIONS English 11 En

15 CONNECTION Connecting to a TV Make sure you refer the following illustration carefully so that connections between this unit and your TV are properly made. CAUTION Do not connect the power cable of this unit until all connections are completed. This unit SPEAKERS Video cable (supplied) TV R L VIDEO AV INPUT 6Ω MIN. /SPEAKER ANTENNA L AUX OUTPUT VIDEO NETWORK FM 75Ω HDMI R HDMI IN AUDIO IN SUBWOOFER USB (ARC) HDMI cable (commercially available) HDMI connection You can enjoy high quality digital picture and sound through the HDMI terminals. Firmly connect an HDMI cable (commercially available) to the HDMI terminal of this unit. Use HIGH SPEED HDMI cables that have the HDMI logo (p. 51). y When you use the HDMI control function, refer to Operating this unit by TV remote control (the HDMI control function) (p. 29) and [HDMI Control] (p. 34). For information on the output mode of the HDMI terminal, refer to [HDMI] (p. 38). When no picture is displayed, refer to TROUBLESHOOTING (p. 41). Connection for the playback of Blu-ray 3D discs You need the following equipment and connections to enjoy BD 3D discs on this unit: a TV that has 3D functionality. a TV and this unit must be connected with HDMI cables. a BD disc should contain 3D images. About audio return channel (ARC) supported TV You can connect an HDMI cable to the audio return channel supported terminal (the terminal with ARC indicated) on the TV. You need to activate the HDMI control function of this unit so as to activate audio return channel (ARC) (p. 34). What is audio return channel (ARC)? This function allows digital audio signal to be output from a TV to this unit through an HDMI cable, without using a digital audio pin cable. y If your TV is not ARC supported, connect the TV and this unit via the AUX jacks on the unit. Video connection Firmly connect the composite video cable (supplied) to the VIDEO jack. Refer to page 39 for information on the video output formats. Notes If you play back the image via VCR, the image may deteriorate due to the copy guard function. To enjoy BD 3D discs on this unit, you need to connect a TV and this unit using HDMI cables (commercially available). 12 En

16 NETWORK AND USB CONNECTION Connecting to the NETWORK terminal PC contents can be played back by connecting this unit to the network. You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live compatible discs. Refer to page 24 for information on BD-Live functions. Notes Firmly connect a network cable (commercially available) to the NETWORK terminal. Use only an STP (shielded twisted pair) network cable. When using the internet, a broadband internet connection as shown below is required. Connect the other connector of the network cable to the hub/broadband router. When using a broadband internet connection, a contract with an internet service provider is required. For more details, contact your nearest internet service provider. Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on your internet environment. Use a network cable/router supporting 10BASE-T/100BASE-TX. Connecting to the USB port You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) for BD Local Storage to the USB port on the rear panel (or front panel) of this unit to save the BD-Live data (p. 24) or to upgrade the software of this unit (p. 40). Firmly connect a USB memory device (commercially available) to the USB port. CAUTION Do not remove the USB memory device or unplug the power cable while the operations for BD-Live or software upgrade are being performed. Do not use a USB extension cable when connecting a USB memory device to the USB port of this unit. Using a USB extension cable may prevent the unit from performing correctly. Notes Yamaha cannot guarantee that all brands USB memory devices will operate with this unit. For more notes on using USB memory devices, refer to page 15. Internet After connecting When you set the Network setting manually, refer to Network (p. 35). To play back the PC contents on your network, refer to Using network content (p. 18). L R AUX AUDIO IN To USB port R SPEAKERS 6Ω MIN. /SPEAKER OUTPUT VIDEO HDMI SUBWOOFER L This unit NETWORK USB memory device (commercially available) y To save BD-Live data on the USB memory device on the front panel, set [Local Storage] to [Front USB] (p. 34). Modem USB ANTENNA FM 75Ω LAN To NETWORK terminal Network cable (commercially available) To LAN terminal Hub or broadband router PC PREPARATIONS English 13 En

17 OPERATIONS Setting with the Initial Wizard/Easy Setup Initial Wizard/Easy Setup allows you to set language, resolution, and screen aspect ratio easily. Initial Wizard screen is displayed when you turn this unit on for the first time after purchase or upgrade. Same setting can be performed from SETUP menu = [System] = [Easy Setup] (p. 31). INITIAL WIZARD/EASY SETUP 1 When Easy Setup screen is displayed, press ENTER to start Easy Setup. 4 Press 5/a to select the screen aspect ratio, then press ENTER. For details on setting items, refer to [TV Screen] (p. 36). Easy Setup is completed. 2 Press 5/a to select the language you want to display on the screen, then press ENTER. 5 Press ENTER to exit Easy Setup. 3 Press 5/a to select the resolution, then press ENTER. For details on setting items, refer to [Video Out Select] (p. 36). Note When you connect your TV and this unit via the VIDEO jack, select [Composite]. Notes When no picture is displayed after Initial Wizard/Easy Setup is completed, refer to TROUBLESHOOTING (p. 41). A warning message concerning 3D video playback appears when this unit is turned on. Press ENTER to dismiss the message or CLEAR to disable it (p. 34). 14 En

18 USB ipod iphone ipod NETWORK USB y When the source is a CD/iPod/FM/TV, refer to Basic operation without HOME/MEDIA menu (p. 19). When the source is a BD/ DVD/USB/Network, read the following (a CD can also be played back with HOME/MEDIA menu). Follow the procedures below to play back the source. BASIC OPERATION Basic operation using HOME/MEDIA menu 1 Set the source 2 Switch the 3 Refer to the following pages for more input operations Disc USB*1 Front p. 16 Rear DISPLAY OPTION TOP MENU SETUP HOME ENTER VOLUME POP-UP MENU OPERATIONS RETURN ON SCREEN p. 13, 16 TUNING PRESET DIMMER STATUS Network (PC contents and YouTube) p. 13, 18 * 1 Some devices may not work properly even if they meet the requirements. Playability of and power supply to all kind of USB devices are not guaranteed. The reading time may exceed 30 seconds depending on the number of files/folders. Yamaha and suppliers accept no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are made backup copies. English 15 En

19 BASIC OPERATION Controlling the volume level 1 Press the Volume control buttons (+/ ) on the remote control to increase/decrease the volume level (p. 7). Turning on/off surround playback mode 1 Press SURROUND to turn on/off surround playback mode (p. 7). When it is set to on: plays back surround sounds using Yamaha s exclusive AIR SURROUND XTREME (p. 48) if the sources is a surround playback source such as a BD. reproduces wider stereo sounds if the source is a stereo playback source such as an audio CD. Common operations for playing back files in a selected folder Example: Selecting a movie file on a USB memory device Note Stop the playback of the video before you move to MEDIA menu screen. 1 Press HOME to move to HOME menu screen. Playing back photo/music/video HOME and MEDIA menus allow you to browse and play multi-media files on data discs, USB memory devices and your network. Note For details on playable discs and files, refer to page 3. Basic operation y HOME menu screen may differ depending on the model. 2 Press 2/3/5 to select [MEDIA], then press ENTER. MEDIA screen appears. HOME DISPLAY OPTION SETUP HOME VOLUME TOP MENU POP-UP MENU 5 ENTER 2 ENTER RETURN ON SCREEN a 5/a: Moves the focus. 2: Returns to the parent folder. HOME: Moves to/exits HOME menu screen. ENTER: Confirms the folder/file. Icons on the top of MEDIA menu : Plays back the disc on the tray, or displays contents in the data disc. : Displays contents in the USB memory device connected to the USB port. : Searches for a DLNA (p. 18) server on the network. : Displays contents on the connected DLNA server. 3 Select the item which contains the file you want to play back, then press ENTER. 16 En

20 BASIC OPERATION 4 Select the Photo, Music, Video or AVCHD folder you want to play back, then press ENTER. To return to the parent folder, press 2 or select. 6 Select the file you want to play back, then press ENTER. When a video file is selected, playback starts. When a music file is selected, Status menu is displayed and playback starts. When a photo file is selected, slide show starts. Note Note that the only the file type selected on this step will be displayed in the following step. For example, if you selected the Photo folder in this step, only photo files are displayed after this step. When you want to play back other than photo, return to this step and select file type again. 5 Select the folder(s) containing the file you want to play back. y To enjoy a slide show with music, press HOME to return to HOME menu screen while music is played back, and select the photo file. Note The displayed file may not be played back depending on the content. Operations for viewing photos While viewing photos, the buttons on the remote control work as shown below. : Stops a slide show and returns to the file browser. : Pauses a slide show. : Plays a slide show. : Moves to a next photo. : Moves to a previous photo. : Makes a slide show faster in 3 steps. : Makes a slide show slower in 3 steps. 5 : Inverts a photo. a : Reflects a photo. 2 : Rotates a photo counterclockwise. 3 : Rotates a photo clockwise. ZOOM: Zooms in/out a photo (zoom in/out: 3 steps each). 5/a/2/3:Pans in zoom mode when a photo is larger than the screen. DIGEST: Switches to thumbnail mode (p. 6). When thumbnails are displayed, you can proceed to the next/ previous page with /. OPERATIONS English 17 En

21 BASIC OPERATION Using network content About DLNA This unit is a DLNA certified digital media player. You can manage photo, music and video contents stored on DLNA servers on your home network. DLNA (Digital Living Network Alliance) provides easy sharing of digital media through network in the home, and you can enjoy digital contents stored on your DLNAserver-software-installed PC or other DLNA compatible device with your TV via this unit. To connect this unit to your DLNA servers, some settings for the DLNA server or device are required. For details, refer to your DLNA server software or DLNA device. Playing back shared contents Note To play back files on your PC, install a DLNA server software, such as Windows Media Player 12, and share files you want to play back. 3 Select the file you want to play back. Notes The playback and operating quality may be affected by your home network condition. The files from removable media, such as USB memory devices or DVD-drive on your media server, may not be shared properly. Playing videos from YouTube You can watch movies from YouTube over the internet using this unit. The services may be changed without notice. 1 Press HOME to display HOME menu screen. 1 Turn on the PC with DLNA server software installed or the DLNA device connected to your home network. 2 Press HOME to display HOME menu screen, then select [MEDIA] to move to MEDIA menu. The DLNA servers connected to the network are listed on the screen. Notes If your DLNA server is not listed, select [DLNA Search] to find it. Depending on the DLNA server, this unit may need to be permitted from the server. To play the file on the DLNA server, this unit and the server must be connected to the same access point. The file requirements may not always be compatible. There may be some restrictions depending on file features and DLNA sever capability. y HOME menu screen may differ depending on the model. 2 Press 5/a/2/3 to select [YouTube], then press ENTER. y To return to HOME menu screen, press RETURN. Notices for network services Access to content provided by third parties requires a high speed internet connection and may also require account registration and a paid subscription. Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice, and Yamaha disclaims any liability in connection with such occurrences. Some content may only be available for specific countries and may be presented in specific languages. Yamaha does not represent or warrant that content services will continue to be provided or available for a particular period of time, and any such warranty, express or implied, is disclaimed. 18 En

22 USB ipod iphone ipod BASIC OPERATION Basic operation without HOME/MEDIA menu Follow the procedures below to play back the source. 1 Set the source 2 Switch the input 3 Select music and start playback ipod*1 TUNING PRESET p. 11, 20 DIMMER STATUS PIP SUBTITLE AUDIO MEMORY SHUFFLE REPEAT A B CD p. 20 OPERATIONS AUX To AUX For details on operation, refer to the instruction manual supplied with the device connected such as a MD player, etc. FM To receive FM radio stations, refer to page 25. TV To output TV sounds, refer to page 12 for connection and select the input source to TV (p. 7). * 1 Some features may not be available depending on the model or the software version of your ipod. When you play back your ipod, Music Enhancer feature is enabled to enhance the sound for compressed music by regenerating musical elements that are lost through compression. (Available only for ipod.) Controlling the volume level Turning on/off surround playback mode 1 Press the Volume control buttons (+/ ) on the remote control to increase/decrease the volume level (p. 7). 1 Press SURROUND to turn on/off surround playback mode (p. 7). When it is set to on: plays back surround sounds using Yamaha s exclusive AIR SURROUND XTREME (p. 48) if the sources is a surround playback source such as a BD. reproduces wider stereo sounds if the source is a stereo playback source such as an audio CD. English 19 En

23 BASIC OPERATION Operation for ipod You can operate playback of your ipod by using the buttons on the remote control. DISPLAY DISPLAY SETUP VOLUME Repeat play You can repeat playback as you want. 1 Press REPEAT repeatedly for repeat play. Each press cycles as follows: OPTION HOME TOP MENU POP-UP MENU Note Some features may not be compatible depending on the model or the software version of your ipod. Playback controls 1 Press any buttons below during playback. : Stops playback. : Pauses playback. : Skips forward. : Skips backward. To start/resume playback, press. y Press DISPLAY to display information below on the front panel display during playback. Song name Artist name Album name Note, REPEAT SHUFFLE RETURN DIMMER ON SCREEN PIP SUBTITLE AUDIO MEMORY SHUFFLE STATUS REPEAT ENTER There are some characters that cannot be displayed on the front panel display of this unit. TUNING PRESET Shuffle play You can play back in random sequence. A B,, Operation for CDs You can also operate playback of music for CDs. Playback controls 1 Press any buttons below during playback. : Stops playback. : Pauses playback. : Skips forward. : Skips backward. : Searches forward. : Searches backward. : Press for instant search. Instant search skips the music 30 seconds. : Press for instant replay. Instant replay replays the music from 10 seconds before. To start/resume playback, press. y You can also use the Numeric buttons to enter the number of the song directly. To clear the entry, press CLEAR. Shuffle play You can play back in random sequence. 1 Press SHUFFLE repeatedly for shuffle play. Each press toggles as follows: Repeat play You can repeat playback as you want. 1 Press REPEAT repeatedly for repeat play. Each press cycles as follows: 1 Press SHUFFLE repeatedly for shuffle play. Each press cycles as follows: *1 You cannot set ALBUMS when you use an ipod touch, iphone, and ipad. 20 En

24 ADVANCED PLAYBACK OPERATION This chapter explains playback of commercially available BD/DVD/CD discs, and recorded DVD-RW/R discs. Note For the basic playback operation, refer to page 6. On Screen menu To display On Screen menu, press ON SCREEN. After that, press 5/a/2/3 to select an item, then press ENTER to operate the desired function. DVD Normal Shuffle CH (chapter) Shuffle TT (title) Shuffle All Random CH (chapter) Random TT (title) Random All VIDEO MUSIC PHOTO Normal Shuffle F (folder) Random F (folder) Audio BD DVD VIDEO : Shows audio language/ signal of a BD/DVD disc currently selected. You can select the desired type of audio. On Screen menu contains following items. Title BD DVD VIDEO : Shows the title number being played back. You can skip to the desired title by selecting it from this item. Chapter BD DVD VIDEO : Shows the chapter number being played back. You can skip to the desired chapter by selecting it from this item. Track/File CD VIDEO MUSIC PHOTO : Shows track/file number being played back. You can skip to the desired track/file by selecting it from this item. Time BD DVD CD VIDEO MUSIC : Shows the playback time. Select display type from the following: Elapsed playback time of the title, chapter, disc, track or file. Remaining playback time of the title, chapter, disc, track or file. Mode/Play Mode DVD CD VIDEO MUSIC PHOTO : Shows current playback mode. You can select playback mode from the following: CD Normal: Normal playback. Shuffle: Random playback without repetition. Random: Random playback with repetition. Angle BD DVD : Shows the currently-selected angle number. If the video is recorded with multiple angles, you can change the angle. y When the Angle Mark ( ) is set to [On] (p. 35), is displayed on the screen when this function is available. Subtitle BD DVD VIDEO : Shows the currentlyselected subtitle language when the subtitle is provided. Subtitle Style BD : Shows the currently-selected subtitle style. This function is available only for Video-file external subtitle. You can select the desired text style of subtitle. Bitrate BD DVD CD VIDEO MUSIC : Shows bitrate of the audio/video signal. Second Video BD : Turns the PIP on/off (p. 6). Second Audio BD : Turns the secondary audio on/off. Ins Search BD DVD CD VIDEO MUSIC : Skips 30 seconds. Ins Replay BD DVD CD VIDEO MUSIC : Replays the content from 10 seconds before. Slide Show PHOTO : Shows slide show speed. You can select the slide show speed from Slow/Medium/Fast. Transition PHOTO : Shows how photo appears on the screen. You can select the transition type. OPERATIONS English 21 En

25 ADVANCED PLAYBACK OPERATION Status menu This shows various settings, such as subtitles, angle settings and the title/chapter/track number currently played back. To display Status menu, press STATUS. Status menu contains following menus. CD MUSIC Example: Icons when playing a music file BD DVD VIDEO Example: Icons when playing a BD disc (Playback status) 2 (Repeat mode): Shows current repeat mode (p. 6). 1 (Playback status) 2 (Disc type/video file icon) 3 (Title number being played): You can jump to specified title with SEARCH button (p. 7). 4 (Chapter number being played): You can jump to specified chapter with SEARCH button (p. 7). 5 (Subtitle currently selected): You can change the subtitle language with SUBTITLE button (p. 6). 6 (Elapsed playback time): You can jump to specified point with SEARCH button (p. 7). 7 (Audio currently selected): You can change the audio language or format with AUDIO button (p. 7). 8 (Repeat mode): Shows current repeat mode (p. 6). 3 (Disc type/music file icon) 4 (Artwork) MUSIC : Displays artwork if the file contains it. 5 (Track/file number being played): You can jump to specified track with SEARCH button (p. 7). 6 (Information) MUSIC : Displays music information if the file contains them. 7 (Elapsed playback time): You can jump to specified point with SEARCH button (p. 7). 8 (Progress bar) MUSIC : Shows progress status of current song. PHOTO Example: Icons when viewing a photo file 1 (Playback status) 2 (Photo file icon) 3 (File number being displayed) 4 (Repeat mode): Shows current repeat mode (p. 6). 5 (Slide show speed) 22 En

26 ADVANCED PLAYBACK OPERATION Using Bookmark This allows you to set Bookmark at the specified point of the video. After Bookmark is set, you can move to the point you set using this function. You can set up to 12 Bookmarks. DVD VIDEO Example: Setting Bookmark when playing back a movie. 2 Press ENTER to program playback order. For audio disc, press 5/a to select a desired track, then press ENTER. For DVD-Video discs, select a desired title (shown as TT) and chapter (shown as CH) instead of a track. To clear a set track, select the track you want to clear, then press CLEAR. Press RETURN to cancel the Program play. 1 Press MARKER during playing back the movie to set Bookmark. Bookmark number and the status are displayed. 2 After Bookmark is set, press DIGEST to display Bookmark select bar. 3 Press 2/3 to select the Bookmark you want to play back, then press ENTER. Press CLEAR to delete the selected Bookmark. Note 3 After programming is finished, press to set and start program playback. 4 To cancel program play, stop playback completely by pressing twice. OPERATIONS When playback is finished (e.g., ejecting the disc, pressing twice), Bookmarks are automatically deleted. Program play This allows you to program playback order of audio disc tracks or DVD chapters. You can program up to 15 tracks/chapters. Using search This allows you to jump to the specified point during playback. BD DVD CD VIDEO MUSIC Example: Searching to the specified point DVD CD Example: Programming the playback order of CD tracks 1 Press PROGRAM during playback to display PROGRAM screen. 1 Press SEARCH during playback. Status bar appears. 2 Press 5/a/2/3 to select one of the item below, then press ENTER. BD DVD : Title number (shown as ) Chapter number (shown as ) Elapsed title time (shown as ) Elapsed chapter time (shown as ) CD : Track number (shown as ) Elapsed track time (shown as ) Elapsed disc time (shown as ) VIDEO MUSIC : File number (shown as ) Elapsed file time (shown as ) Continued to the next page. \ English 23 En

27 ADVANCED PLAYBACK OPERATION 3 Press 5/a or number buttons to set/adjust the value of the focused item, and press ENTER to jump to the specified point. 4 To close the status bar, press STATUS. Enjoying BONUSVIEW and BD- Live This unit supports BONUSVIEW (p. 48) (BD-ROM Profile 1 Version 1.1) and BD-Live (p. 48) (BD-ROM Profile 2) playback functions. Note Functions and playback method vary depending on the disc. Refer to the guidance on the disc or the supplied user s manual. Using Picture in Picture function (secondary audio/video playback) BD-Video that includes secondary audio and video compatible with Picture in Picture can be played back with secondary audio and video simultaneously as a small video in the corner. Using the feature of BD-Live 1 Set the Network setting (p. 35). 2 Connect the USB memory device to this unit (p. 13). BD-Live data is saved in a USB memory device connected to this unit. Connect a USB memory device (2 GB or greater and formatted with FAT 32/16) supporting USB 2.0 High Speed (480 Mbit/s) to the USB port that you select on Local Storage (p. 34). The default setting is the USB port on the rear panel. A BUDA folder is created automatically in the USB memory device when necessary. If there is insufficient storage space, the data will not be copied/downloaded. Delete unneeded data or use a new USB memory device. Some time may be required for the data to load (read/write). 3 Play back the disc. Primary video Secondary video Notes 4 Run BD-Live according to the instructions on the disc. 1 While PIP Mark ( ) or Secondary Audio Mark ( ) is displayed, press PIP to turn the Picture in Picture function on/off. Notes To listen to secondary audio from a TV connected with an HDMI cable, make sure that the Audio Output setting (HDMI) is set to [PCM] (p. 38). Depending on the disc, to listen to secondary audio, you may need to set secondary audio to on from the top menu of the disc (p. 8). The secondary audio and video for Picture in Picture may automatically play back and be removed depending on the content. Also, playable areas may be restricted. Regarding playback method of BD-Live contents, etc., perform the operations in accordance with the instructions in the BD disc manual. To enjoy BD-Live functions, perform the network connection (p. 13) and Network settings (p. 35). Refer to [BD-Live Connection] (p. 35) regarding the setup to restrict access to BD-Live contents. The time required to download the provided programs into the USB memory device connected to this unit varies depending on the internet connection speeds and the data volume of the programs. BD-Live programs provided through the internet may not be able to display the connection depending on the status (upgrading) of the provider. In such cases, take out the disc and try again. If the BD-Live screen does not appear for a while after you select the BD-Live function in the BD disc menu, the USB memory device may not have enough free space. In such cases, eject the disc from this unit, and then erase the data in the USB memory device selecting [Format] in [Local Storage] (p. 34). 24 En