NoAm Version CLAMPS indd

Transcription

1 A Clamps A Clamps In most industrial countries Clamps symbolise quick and easy pipe and hose installations as well as a clean distinct pipe layout. Clamps have been successfully tested and approved by several international organisations, including: Index tandard eries (DIN 3015, Part 1) A2 A6 The vibration and noise reducing features are appre ciated as being an important contribution to environmental protection. Apart from the technical sophistication of Clamps, the second-to-none delivery, prompt service even for special constructions, Clamps are also the most economical ones to install. Clamps applications are almost unlimited. Due to the extraordinary wide product range, almost all areas of pipe, tube, hose and cable installation are covered: Industrial ydraulics Mobile ydraulics Marine ydraulics Offshore General Industrial Pipe Construction Mining Industry Nuclear Reactor Construction Instrumentation and Control Technology Pneumatics American Bureau of hipping Bureau Veritas Department of the Navy, New York Germanischer Lloyd Lloyd s Register of hipping Registro Italiano Navale Russian Maritime Register of hipping Technischer Überwachungsverein TÜV United tates Coast Guard Please do not hesitate to contact for further details. eavy eries (DIN 3015, Part 2) Twin eries (DIN 3015, Part 3) eavy Twin eries Compact Twin eries Agriculture Twin eries Plastic addle Clamps Custom-Designed Clamps Light eries Construction eries Flat and Round teel U-Bolts Metal Pipe Clamps eavy addles A26 A42 A52 A56 A56 A57 A58 A60 A68 A70 A78 A80 Light addles A82 Cushion Clamp eries A84 Industry-pecific olutions A86 Technical Appendix A88

2 Index tandard eries (DIN 3015, Part 1) Clamp Body Profiled Inside urface (PP / PA / A / AL) A6 Cover Plate DP A18 Clamp Body mooth Inside urface (PP / PA / A) A7 exagon ead Bolt (for use with Cover Plate DP) A A18 Clamp Body with Rubber Insert (PP / PA) RI A8 afety Washer (DIN 93) I A19 Clamp Body Compact Design (PP / PA) CC A9 afety Washer (DIN 463) I A19 Clamp Body Rectangular Design (PP / PA) VK A9 ocket Cap crew I A20 Clamp Body Oval Design (PP / PA) A9 lotted ead crew LI A20 Clamp Body (Anti Corrosion Technology) ACT A10 exagon ead Bolt (for use with Insert E / EP) AE A20 Weld Plate P A12 Insert E / EP A20 Elongated Weld Plate PV A12 afety Locking Plate IG A21 Twin Weld Plate DP A13 tacking Bolt AF A21 Group Weld Plate RAP A13 Clamp Assemblies A22 Angled Weld Plate WP A14 Technical Appendix A88 Bridge Weld Plate BP A14 Multi-Group Weld Plate RAP-MGR A15 Clamp Body for Multi-Group Weld Plate (PP / PA) MGR A15 exagon Rail Nut M A16 Mounting Rail T A16 Channel Rail Adaptor CRA A17 A2

3 Index eavy eries (DIN 3015, Part 2) Twin eries (DIN 3015, Part 3) Clamp Body Profiled Inside urface (PP / PA / A / AL) A26 Clamp Body Profiled Inside urface (PP / PA) A42 Clamp Body mooth Inside urface (PP / PA / A) Clamp Body with Rubber Insert (PP / PA) RI A28 A29 Clamp Body mooth Inside urface (PP / PA) A42 ingle Weld Plate P A43 A Clamps Weld Plate for ingle Clamps PAL A30 Group Weld Plate RAP A43 Weld Plate for Double Clamps PA A30 exagon Rail Nut M A44 Elongated Weld Plate for ingle Clamps PAL/DUEB A31 Mounting Rail T A44 Elongated Weld Plate for Double Clamps PA/DUEB A31 Channel Rail Adaptor CRA A45 Mounting Rail Nut GMV A32 Cover Plate GD A46 Mounting Rail TV A32 exagon ead Bolt A A46 Channel Rail Adaptor CRA A33 afety Locking Plate I A47 Cover Plate for ingle Clamps DPAL A34 afety Locking Plate IV A47 Cover Plate for Double Clamps DPA A34 tacking Bolt AF A48 exagon ead Bolt A A35 Clamp Assemblies A49 ocket Cap crew I A35 Technical Appendix A88 afety Washer (DIN 93) I A36 afety Washer (DIN 463) I A36 afety Locking Plate IP A37 tacking Bolt AF A3 Clamp Assemblies A38 Technical Appendix A88 A3

4 Index eavy Twin eries Agriculture Twin eries Clamp Body Profiled Inside urface (PP / PA) A52 Clamp Body (PP) AG A56 Clamp Body with Rubber Inserts (PP / PA) RI A52 Plastic addle Clamps Weld Plate PAD A53 addle Clamps for Cylinder upply Lines ZR 518 A57 Cover Plate DPAD A53 Custom-Designed Plastic addle Clamps A57 exagon ead Bolt A A54 Custom-Designed Clamps Mounting Rail Nut GMV A54 Machined Versions A58 Mounting Rail TV A54 Injection Moulded Versions (Flexi Clamps) A59 Channel Rail Adaptor CRA A54 Light eries Types LBBU ocket Cap crew I A54 Clamp Body ingle Design A60 afety Locking Plate IPD A54 Clamp Body Twin Design A61 tacking Bolt AF A54 Weld Plate LBBU-P A62 Clamp Assemblies A55 leeve LBBU-UE A62 Compact Twin eries Cover Plate LBBU-DP A63 Clamp Body Profiled Inside urface (PP) D1 A56 exagon ead Bolt A A63 ingle Weld Plate P D1 A56 Light eries Types LB/LBG/LBU Cover Plate U D1 A56 Clamp Body ingle Design LB A64 exagon ead Bolt A D1 A54 Clamp Body Twin Design LBG/LBU A65 A4

5 Index Light eries Types LN/LNGF/LNUF eavy addles Clamp Body ingle Design LN A66 eavy addles ingle-ended Design DIN 1592 A80 Clamp Body Twin Design LNGF/LNUF A67 Cover Plate Twin Design DPL A67 eavy addles Double-Ended Design DIN 1593 A81 Light addles A Clamps Construction eries Light addles ingle-ended Design DIN 1596 A82 Construction eries K / DK A68 Light addles Double-Ended Design DIN 1597 A83 Construction eries (for Anchor Bolt Fastening) KV / DKV A69 Cushion Clamp eries Flat and Round teel U-Bolts Cushion Clamp eries TC / PC A84 Flat teel U-Bolt with Plastic Pipe addle (hort) and U-Profile FB / RUK A70 Channel Rail C A85 Round teel U-Bolt with Plastic Pipe addle (hort) RB / RUK A72 Industry-pecific olutions Round teel U-Bolt with Plastic Pipe addle (Long) RB / RUL A74 For Power Plants A86 Round teel U-Bolt without Plastic Pipe addle RBD A76 For Wind Power tations A86 Rubber-hrouded Round teel U-Bolt RU A77 For Rail Technology Applications A86 Rubber-Lined Flat teel U-Bolt LU A77 For Process Technology Applications A86 Metal Pipe Clamps Technical Appendix Metal Pipe Clamp with Rounded Ends DIN 3567-A A78 Metal Pipe Clamp with Rounded Ends and One-ide Elongated haft DIN 3567-B A79 tandard Clamp Body Materials tandard Rubber Insert Materials pecial Clamp Body Materials tandard Clamp Body Designs Materials and urface Finishings of Metal Parts Property Classes / Grades of Bolts and crews Thread Conversion Chart General Installation Instructions Tightening Torques / Maximum Loads in Pipe Direction Dimensions and Weights of Clamp Assemblies Packaging Units (election) A88 A88 A89 A90 A91 A91 A91 A92 A93 A94 A95 A5

6 DIN 3015, Part 1 Components: Dimensions / Order Codes Clamp Body ød1 ød Group 1 Group 1A to 8 Clamp Body One clamp body is consisting of two clamp halves. Colour: Green Material code: PP Colour: Black Material code: PA (87 hore-a) Colour: Black Material code: A Colour: elf-colour Material code: ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. 106PP 106APP Group 1 Exact outside diameter Ø D1 (mm) 06 Material code (see below) PP Proven, tested and trusted product in various markets Recommended for the safe installation of rigid pipes and tubes Available for all commonly used pipe and tube outside diameters Environmental protection due to vibration/noise reducing design Excellent weathering resistance, even under extreme conditions Group DIN 1 0 1A Outside Diameter Nominal Bore Order Codes Dimensions Pipe / Tube Copper (2 Clamp alves) ( mm /in) Ø D1 Pipe Tube (mm) (in) (in) (in) ( = Material) min. Width ,4 1/4 106,4 8 5/ ,5 27 0,4 30 9,5 3/8 1/4 109, / A 6,4 1/4 106,4A 8 5/16 108A ,4 30 9,5 3/8 1/4 109,5A /8 110A A 12,7 1/2 3/8 212,7 13,5 1/4 213, , /8 1/ ,2 3/8 217, / ,3 1/2 321, , / , ,4 26,9 3/4 426, , , , / , , / , / ,3 1-1/2 541, / ,5 1-3/4 644,5 48,3 1-1/2 648, , , , ,2 2-1/4 757,2 60, ,3 63,5 2-1/2 763, , / /2 (ANI B 36-10) , /2 (DIN EN 10220) 776,1 88, , , /2 8102L Additional outside diameters are available upon request. Please consult for further information. A6 Dimensional drawings: All dimensions in mm (in).

7 Components: Dimensions / Order Codes DIN 3015, Part 1 ø D1 ød1 Clamp Body 10 L 2.39 Group 1 Group 1A to 8 A Clamps Group Outside Diameter Nominal Bore Order Codes Dimensions ose ydraulic ose (2 Clamp alves) ( mm /in) Ø D1 AE 100 R1 AT (mm) (in) (in) ( = Material) Width ,4 1/4 106, / , ,5 3/8 109, A 6,4 1/4 106,4A 1A 1 8 5/16 108A ,5 3/8 109,5A A A 12,7 1/2 212,7 13,5 213, / ,2 217, ,4 1/4 313,4 17,4 3/8 317,4 19 3/ ,5 1/2 320, , ,3 321, ,9 5/8 323, , ,4 26,9 426, , ,8 3/4 527, / ,7 533, , , , / ,8 1-1/4 543,8 44,5 1-3/4 644, ,3 648, , ,8 1-1/2 649, , , ,2 2-1/4 757,2 60,3 760, ,5 2-1/2 763, / , ,1 DIN Clamp Body One clamp body is consisting of two clamp halves. 106PP 106APP Group 1 Exact outside diameter Ø D1 (mm) 06 Material code (see below) PP Colour: Green Material code: PP Colour: Black Material code: PA (87 hore-a) Colour: Black Material code: A ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. Proven, tested and trusted product in various markets Recommended for the safe installation of hoses and cables Chamfered edges avoid damaging of the hoses and cables Available for all commonly used hose and cable outside diameters Excellent weathering resistance, even under extreme conditions ,9 888, L Dimensional drawings: All dimensions in mm (in). A7

8 DIN 3015, Part 1 Components: Dimensions / Order Codes Clamp Body Rubber Insert with Film inge ød ød1 406 One assembly is consisting of one clamp body and one insert. Group 4 Exact outside diameter Ø D (mm) 06 Material code (see below) Clamp Body One clamp body is consisting of two clamp halves. 4 Group 4 Material code (see below) 06 Rubber Insert Exact outside diameter Ø D (mm) 06 Group 4 (tandard) and 4 (eavy) 6 (tandard) and 5 (eavy) Colour: Black Material code: Colour: Black Material code: Rubber Insert (73 hore-a) Colour: Black Group Outside Diameter Order Codes ( R = Clamp Body Material) Dimensions Pipe / Tube / ose Clamp Assembly Clamp Body Rubber Insert ( mm /in) Ø D (Clamp Body + (mm) (in) Rubber Insert) (2 Clamp alves) Ø D1 Width R RI 06 (4+4) DIN / R RI 08 (4+4) R RI 10 (4+4) R RI 12 (4+4) 12,7 1/2 412,7 R RI 12,7 (4+4) R 4 R RI 14 (4+4) R RI 15 (4+4) 16 5/8 416 R RI 16 (4+4) 17,2 417,2 R RI 17,2 (4+4) R RI 18 (4+4) 19 3/4 419 R RI 19 (4+4) R RI 20 (6+5) 21,3 621,3 R RI 21,3 (6+5) 22 7/8 622 R RI 22 (6+5) , R RI 25 (6+5) , R 26,9 626,9 R RI 26,9 (6+5) R RI 28 (6+5) R RI 30 (6+5) /4 632 R RI 32 (6+5) Additional outside diameters are available upon request. Please consult for further information. ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. Proven, tested and trusted product in various markets Either for the extra vibration/noise reducing installation of pipes and tubes or the extra gentle installation of hoses and cables Available for all commonly used outside diameters Excellent weathering resistance, even under extreme conditions A8 Dimensional drawings: All dimensions in mm (in).

9 Components: Dimensions / Order Codes DIN 3015, Part 1 Clamp Body Ø D1 Ø D2 B (Upper Clamp alf rotated by 180 ) B A Clamps Group Outside Diameter Outside Diameter Dimensions (mm/in) Regular ose Compact ose (2 Clamp alves) Ø D1 Ø D2 (mm) (in) (mm) (in) ( = Material) Regular ose Compact ose B DIN , CC , , , ,2 -CC , , ,4 -CC Clamp Body 319 One clamp body is consisting of two clamp halves. Group 3 Outside diameter Ø D1 (mm) of regular hose 19 Material code (see below) Additional outside diameters are available upon request. Please consult for further information. Only one clamp body required for two different hose diameters (compact hose + regular hose) Rotate upper clamp half by 180 and use clamp body to fasten compact hoses instead of regular hoses Available for three different combinations of outside hose diamaters Outer dimensions according to DIN 3015, Part 1 Effective cost reduction due to lower inventories clamp body materials, tested and approved according to ee page A89 for material properties and technical information. Colour: Black Material code: Colour: Black Material code: ee page A88 for properties and technical information. Clamp Body Clamp Body One clamp body is consisting of two clamp halves. Clamp Body Clamp Body Please replace PP by PA to order a clamp body made of Polyamide instead of Polypropylene. One clamp body is consisting of two clamp halves. Clamp Body Please replace PP by PA to order a clamp body made of Polyamide instead of Polypropylene. Outer dimensions of clamp body according to tandard eries, Group 5 For proximity switches according to DIN EN or similar, rectangular construction, with a square of 40 mm x 40mm / 1.57 in x 1.57in or 40mm x 36mm / 1.57in x1.42in For proximity switches according to DIN EN or similar, round construction, please use tandard eries clamp body, Group 4, with the diameter required (e.g. 430 PP) Use with exagon Rail Nut M and Mounting Rail T to provide axial and horizontal position adjustment when loosening the bolts Outer dimensions of clamp body according to tandard eries, Group 6 For electric cables with diameters between 20 mm /.79 in and 50mm / 1.97in For electric cables with diameters between 40 mm / 1.57in and 72mm / 2.83in, please use eavy eries clamp body, types PP and PA Recommended to use with exagon ead Bolts A and Cover Plate DP, ocket Cap crew I (with washer) or lotted ead crew LI (with washer) For varying cable diameters, only the bolt lengths need to be varied Dimensional drawings: All dimensions in mm (in). A9

10 DIN 3015, Part 1 Components: Dimensions / Order Codes Clamp Body 2 Integrated Rubber trips per Clamp alf made of Anti Corrosion Elastomer ACE (Green Colour for Illustration Purposes only) ØD2 ØD1 ØD3 W Clamp Body Clamp Body made of with Integrated Rubber trips made of Colour: Black Material code: ACT ee page A89 for material properties and technical information. 2 ACT 1 ACT One clamp body is consisting of two clamp halves, each one with two integrated rubber strips. Group 2 Exact outside diameter Ø D1 (mm) Material code (see below) ACT Group Outside Diameter Order Codes Dimensions Pipe / Tube (2 Clamp alves) ( mm /in) Ø D1 (mm) (in) ØD2 ØD3 W Width 6 106A ACT 6,6 5,2 1, ,4 1/4 106,4A ACT 7,1 5,6 1, A 1 9,5 3/8 109,5A ACT 10,5 8,3 2, A ACT 11,1 8,8 2, A ACT 13,3 10,5 2, ,7 1/2 212,7 ACT 14,1 11 3, ACT 15,6 12,3 3, ACT 20,0 16,3 3, /4 319 ACT 21,1 17,3 4, ACT 22,2 18,3 4, , ,3 321,3 ACT 23,7 19,6 4, , ,4 ACT 28,2 23,7 4, DIN Additional sizes and outside diameters are available upon request. Please consult for further information. Geometrically designed rubber strips in direct contact with the pipe to avoid crevice corrosion formed under the clamp No accumulation of water between clamp body and pipe Formation of drainage channels to aid dispersal of water Material and construction in compliance with Norwegian offshore standard NOROK Z-CR-010 To be used in sub-sea and top-side environments igh UV stability and resistance against seawater, rain and oil Independently tested in laboratory and offshore conditions Fully detailed test reports available on request A10 Dimensional drawings: All dimensions in mm (in).

11 A Clamps A11

12 DIN 3015, Part 1 Components: Dimensions / Order Codes Thread G Thread G ød D B B Group 1 Group 1A to 8 P1UW2 ingle Weld Plate P Group 1 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Dimensions ( mm /in) Order Codes DIN Thread G B ØD (tandard Options) 1 0 M6 31, ,5 12 P 1 M W2 1/4 20 UNC P 1 U W2 1A 1 M ,5 12 P 1A M W2 1/4 20 UNC P 1A U W2 2 2 M ,5 12 P 2 M W2 1/4 20 UNC P 2 U W2 3 3 M ,5 12 P 3 M W2 1/4 20 UNC P 3 U W2 4 4 M ,5 12 P 4 M W2 1/4 20 UNC P 4 U W2 5 5 M ,5 12 P 5 M W2 1/4 20 UNC P 5 U W2 6 6 M ,5 12 P 6 M W2 1/4 20 UNC P 6 U W2 7 7 M ,5 12 P 7 M W2 1/4 20 UNC P 7 U W2 8 8 M ,5 12 P 8 M W2 1/4 20 UNC P 8 U W2 ød2 Thread G ød2 Thread G ød1 L3 ød1 L3 B B Group 1 Group 1A to 8 1UW2 Elongated Weld Plate Group 1 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN Thread G L3 B ØD1 ØD2 (tandard Options) 1 0 M , ,5 12 6,5 PV 1 M W2 1/4 20 UNC PV 1 U W2 1A 1 M ,5 12 6,5 PV 1A M W2 1/4 20 UNC PV 1A U W2 2 2 M ,5 12 6,5 PV 2 M W2 1/4 20 UNC PV 2 U W2 3 3 M ,5 12 6,5 PV 3 M W2 1/4 20 UNC PV 3 U W2 4 4 M ,5 12 6,5 PV 4 M W2 1/4 20 UNC PV 4 U W2 5 5 M ,5 12 6,5 PV 5 M W2 1/4 20 UNC PV 5 U W2 6 6 M ,5 12 6,5 PV 6 M W2 1/4 20 UNC PV 6 U W2 7 7 M ,5 12 6,5 PV 7 M W2 1/4 20 UNC PV 7 U W2 8 8 M ,5 12 6,5 PV 8 M W2 1/4 20 UNC PV 8 U W2 A12

13 Thread G Components: Dimensions / Order Codes Thread G DIN 3015, Part 1 L3 ød L3 23,5 ød B B Group 1 Group 1A to 8 A Clamps Group Dimensions ( mm /in) Order Codes DIN Thread G L3 B ØD (tandard Options) 1 0 M DP 1/40 M W2 1/4 20 UNC DP 1/40 U W2 1A 1 M DP 1A/37 M W2 1/4 20 UNC DP 1A/37 U W2 2 2 M DP 2/44 M W2 1/4 20 UNC DP 2/44 U W2 3 3 M DP 3/52 M W2 1/4 20 UNC DP 3/52 U W2 4 4 M DP 4/60 M W2 1/4 20 UNC DP 4/60 U W2 5 5 M DP 5/75 M W2 1/4 20 UNC DP 5/75 U W2 6 6 M DP 6/90 M W2 1/4 20 UNC DP 6/90 U W2 DP UW2 Twin Weld Plate DP Group 1 Pipe center spacing L3 (mm) 40 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Thread G ød L3 ød L3 B Thread G Group 1 Group 1A to 8 Dimensions ( mm /in) Order Codes DIN Thread G L3 B ØD (tandard Options) 1 0 M ,5 12 RAP 1/31/10 M W1 1/4 20 UNC RAP 1/31/10 U W1 1A 1 M ,5 12 RAP 1A/37/10 M W1 1/4 20 UNC RAP 1A/37/10 U W1 2 2 M ,5 12 RAP 2/44/10 M W1 1/4 20 UNC RAP 2/44/10 U W1 3 3 M ,5 12 RAP 3/52/10 M W1 1/4 20 UNC RAP 3/52/10 U W1 4 4 M ,5 12 RAP 4/60/5 M W1 1/4 20 UNC RAP 4/60/5 U W1 5 5 M ,5 12 RAP 5/75/5 M W1 1/4 20 UNC RAP 5/75/5 U W1 6 6 M ,5 12 RAP 6/90/5 M W1 1/4 20 UNC RAP 6/90/5 U W1 UW1 Group Weld Plate Group 1 Pipe center spacing L3 (mm) 31 Number of clamps 10 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) A13

14 DIN 3015, Part 1 Components: Dimensions / Order Codes Thread G B1 B1 B2 ød1 ød2 2 B2 Thread G ød1 ød2 Group 1 Group 1A to 8 WP1UW1 Angled Weld Plate WP Group 1 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN Thread G B1 B2 ØD1 ØD2 (tandard Options) 1 0 M ,5 12 6,5 WP 1 M W1 1/4 20 UNC WP 1 U W1 1A 1 M ,5 12 6,5 WP 1A M W1 1/4 20 UNC WP 1A U W1 2 2 M ,5 12 6,5 WP 2 M W1 1/4 20 UNC WP 2 U W1 3 3 M ,5 12 6,5 WP 3 M W1 1/4 20 UNC WP 3 U W1 4 4 M ,5 12 6,5 WP 4 M W1 1/4 20 UNC WP 4 U W1 5 5 M ,5 12 6,5 WP 5 M W1 1/4 20 UNC WP 5 U W1 6 6 M ,5 12 6,5 WP 6 M W1 1/4 20 UNC WP 6 U W1 Thread G ød 2 1 B BP1AUW1 Bridge Weld Plate BP Group 1A U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN Thread G B 1 2 ØD (tandard Options) 1A 1 M ,5 12 BP 1A M W1 1/4 20 UNC BP 1A U W1 2 2 M ,5 12 BP 2 M W1 1/4 20 UNC BP 2 U W1 3 3 M ,5 12 BP 3 M W1 1/4 20 UNC BP 3 U W1 4 4 M ,5 12 BP 4 M W1 1/4 20 UNC BP 4 U W1 5 5 M ,5 12 BP 5 M W1 1/4 20 UNC BP 5 U W1 6 6 M ,5 12 BP 6 M W1 1/4 20 UNC BP 6 U W1 A14

15 Components: Dimensions / Order Codes DIN 3015, Part 1 L3 L4 L3 A Clamps Number of Dimensions ( mm /in) Order Codes Weld Nuts Thread G L3 L4 B ØD (tandard Options) 6 M ,5 12 RAP-MGR 25/156 M W1 1/4 20 UNC RAP-MGR 25/156 U W1 9 M ,5 12 RAP-MGR 25/234 M W1 1/4 20 UNC RAP-MGR 25/234 U W1 12 M ,5 12 RAP-MGR 25/312 M W1 1/4 20 UNC RAP-MGR 25/312 U W1 15 M ,5 12 RAP-MGR 25/390 M W1 1/4 20 UNC RAP-MGR 25/390 U W1 20 M ,5 12 RAP-MGR 25/520 M W1 1/4 20 UNC RAP-MGR 25/520 U W1 27 M ,5 12 RAP-MGR 25/700 M W1 1/4 20 UNC RAP-MGR 25/700 U W1 Multi-Group Weld Plates, type RAP-MGR are designed to be used in combination with tandard eries clamp bodies, Group 2 (regular types, see pages A6 ff.) covering a diamater range from 8 mm /.31 in to 18 mm /.71 in, as well as tandard eries clamp bodies, Group 5 (type MGR, see below) covering a diamater range from 20 mm /.79 in to 42 mm / 1.65 in. Thus, all tandard eries metal parts of these groups can be used. UW1 Multi Group Weld Plate uitable for Group 2 and 5 25 Length L4 (mm) 156 (with 6 weld nuts) (with 9 weld nuts) (with 12 weld nuts) (with 15 weld nuts) (with 20 weld nuts) (with 27 weld nuts) 700 U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, phosphated W2 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti L3 L3 Ø D L3 ØD L3 L3 B Thread G Group 5 Group Outside Diameter Nominal Bore Order Codes Dimensions Pipe / Tube Copper (2 Clamp ( mm /in) Ø D Pipe Tube alves) DIN (mm) (in) (in) (in) ( = Material) L3 min. Width MGR 21,3 1/2 521,3 -MGR 22 3/ MGR MGR MGR 26,9 3/4 526,9 -MGR MGR , MGR / MGR 33, ,7 -MGR / MGR / MGR MGR / MGR Additional outside diameters are available upon request. Please consult for further information. Clamp Body 520 One clamp body is consisting of two clamp halves. Group 5 Exact outside diameter Ø D1 (mm) 20 Material code (see below) Colour: Green Material code: Colour: Black Material code: ee page A88 for properties and technical information. A15

16 DIN 3015, Part 1 Components: Dimensions / Order Codes M6 Thread G B ød 2 M UW3 exagon Rail Nut M Group 1 to 8 (DIN Group 0 to 8) U Metric IO thread M Material code Carbon teel, untreated W1 Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN Thread G L B 1 2 ØD (tandard Options) 1 0 1A M6 25,5 10,2 13,5 5,5 12 M 1-8/1D M W3 1/4 20 UNC M 1-8/1D U W3 exagon Rail Nuts, type M 1-8/1D are also suitable for Twin eries, Group 1D. B1 B2 B1 B2 B1 B L A16 T11 W1 Mounting Rail T eight of rail 11 mm /.43 in mm /.55 in mm / 1.18 in 30 Length of rail 1 m / 3.28 ft 2 m / 6.56 ft Alternative lengths available upon request. Consult for further information. Material code Carbon teel, untreated W1 Carbon teel, zinc/nickel-plated W3 tainless teel V2A W / (AII 304 / 303) tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes (tandard Options) DIN B1 B2 Length of Rail: 1m / 3.28ft Length of Rail: 2m / 6.56ft 1 0 1A eight 11 mm /.43 in T 11-1 W1 eight 14 mm /.55 in T 14-1 W1 eight 30 mm / 1.18 in T 30-1 W1 Mounting Rails, type T 11/14/30 are suitable for all tandard eries and Twin eries group sizes. eight 11 mm /.43 in T 11-2 W1 eight 14 mm /.55 in T 14-2 W1 eight 30 mm / 1.18 in T 30-2 W1 A16

17 Components: Dimensions / Order Codes DIN 3015, Part 1 A Clamps Group Dimensions ( mm /in) Order Codes DIN Thread G L3 B1 B (tandard Options) 1 0 1A M ,5 CRA 1-8/1D M W3 1/4 20 UNC CRA 1-8/1D U W3 Adaptor UW3 Channel Rail Adaptor Group 1 to 8 (DIN Group 0 to 8) U Metric IO thread M Material code Carbon teel, zinc/nickel-plated W3 tainless teel V4A / (AII 316 / 316 Ti) The Channel Rail Adaptor, type CRA 1-8/1D is also suitable for Twin eries, Group 1D. The Channel Rail Adaptor, type CRA, is suitable for various channel rails, including the following types: ALFEN ILTI UNITRUT (Cushion Clamp eries) M 41/41 MQ-21, MQ-41, MQ-52, MQ-72 P1000, P1000T, P1000V, P1000VT, P1001 C PL, C GR ZA 41/22 MQ-21U, MQ-41U, MQ-72U P2000, P2000T C PL, C GR ZM 41/41 MQ-21D, MQ-41D, MQ-52-72D P3003, P3003T, P3300V, P3300VT, P3301 ee page A85 for technical information. ZM 41/22 L 41/41, L 41/B2 P4000, P4000T P5000, P5000T, P5001, P5500, P5500T, P5501 Consult to check compatibility with additional types of channel rails. A17

18 DIN 3015, Part 1 Components: Dimensions / Order Codes ød ød B B Group 1 Group 1A to 8 DP1W3 Cover Plate DP Group 1 Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN B ØD (tandard Options) , DP 1 W3 1A DP 1A W , DP 2 W DP 3 W DP 4 W DP 5 W DP 6 W DP 7 W DP 8 W3 L (according to DIN 931 / 933 or ANI / AME B ) Dimensions applicable only when used with Cover Plate DP G A3UW3 Type of bolt exagon ead Bolt (according to DIN 931 / 933 A or ANI / AME B ) Group 3 U Metric IO thread M Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes DIN Thread G x L (tandard Options) 1 0 M6 x 30 A 1/1A M W3 1/4 20 UNC x 1-1/4 A 1/1A U W3 1A 1 M6 x 30 A 1/1A M W3 1/4 20 UNC x 1-1/4 A 1/1A U W3 2 2 M6 x 35 A 2/1D M W3 1/4 20 UNC x 1-3/8 A 2/1D U W3 3 3 M6 x 40 A 3 M W3 1/4 20 UNC x 1-1/2 A 3 U W3 4 4 M6 x 45 A 4 M W3 1/4 20 UNC x 1-7/8 A 4 U W3 5 5 M6 x 60 A 5 M W3 1/4 20 UNC x 2-3/8 A 5 U W3 6 6 M6 x 70 A 6 M W3 1/4 20 UNC x 2-3/4 A 6 U W3 7 7 M6 x 100 A 7 M W3 1/4 20 UNC x 4 A 7 U W3 8 8 M6 x 125 A 8 M W3 1/4 20 UNC x 4-7/8 A 8 U W3 A18 exagon ead Bolts, type A 2/1D are also suitable for Twin eries, Group 1D.

19 Components: Dimensions / Order Codes DIN 3015, Part 1 ØD2 B Radius R L ØD1 A Clamps (according to DIN 93) Dimensions ( mm /in) Order Codes DIN ØD1 B ØD2 L R (tandard Options) 1 to 8 0 to 8 6, , I 6,4 DIN 93 W3 afety Washers, type I are used as locking devices to prevent exagon ead Bolts, type A from loosening. afety Washers, type I are suitable for all tandard eries group sizes. W3 Type of washer afety washer with 1 tab (according to DIN 93) Material code Carbon teel, zinc/nickel-plated W3 ØD2 B Radius R ØD1 (according to DIN 463) Group Dimensions ( mm /in) Order Codes DIN ØD1 B ØD2 R (tandard Options) 1 to 8 0 to 8 6, , I 6,4 DIN 463 W3 afety Washers, type I are used as locking devices to prevent exagon ead Bolts, type A from loosening. afety Washers, type I are suitable for all tandard eries group sizes. W3 Type of washer afety washer with 2 tabs (according to DIN 463) Material code Carbon teel, zinc/nickel-plated W3 A19

20 DIN 3015, Part 1 Components: Dimensions / Order Codes D D L L G G (according to IO 4762 or ANI / AME B18.3) Dimensions applicable only when used without Cover Plate DP (according to IO 1207 or ANI / AME B18.6.3) Dimensions applicable only when used without Cover Plate DP 1MW3 1MW3 Type of bolt ocket Cap crew with Washer (according to IO 4762 or ANI / AME B18.3) lotted ead crew with Washer (according to IO 1207 or ANI / AME B18.6.3) Group 1 Thread code Metric IO thread M Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Group Dimensions ( mm /in) Order Codes (tandard Options) DIN Thread G x L D ocket Cap crews lotted ead crews 1 0 M6 x 20 I 1 M W3 LI 1 M W3 1A 1 M6 x 20 I 1A M W3 LI 1A M W3 2 2 M6 x 25 I 2 M W3 LI 2 M W3 3 3 M6 x 30 I 3 M W3 LI 3 M W3 11 0,8 4 4 M6 x 35 I 4 M W3 LI 4 M W M6 x 50 I 5 M W3 LI 5 M W3 6 6 M6 x 60 I 6 M W3 LI 6 M W3 7 7 M6 x 90 I 7 M W3 ON REQUET ONLY 8 8 M6 x 110 I 8 M W3 ON REQUET ONLY. D2 L Type of bolt exagon ead Bolt (according to DIN 931 / 933 or ANI / AME B ) AE1UW3 for use with Insert E / EP E Group 1 U Metric IO thread M Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) A (according to DIN 931 / 933 or ANI / AME B ) Dimensions applicable only when used with Inserts EP / E Dimensions ( mm /in) Order Codes DIN Thread G x L (tandard Options) 1 0 M6 x 27 AE 1 M W3 1/4 20 UNC x 1-1/8 AE 1 U W3 1A 1 M6 x 27 AE 1A M W3 1/4 20 UNC x 1-1/8 AE 1A U W3 2 2 M6 x 32 AE 2 M W3 1/4 20 UNC x 1-3/8 AE 2 U W3 3 3 M6 x 35 AE 3 M W3 1/4 20 UNC x 1-3/8 AE 3 U W3 4 4 M6 x 42 AE 4 M W3 1/4 20 UNC x 1-5/8 AE 4 U W3 5 5 M6 x 57 AE 5 M W3 1/4 20 UNC x 2-3/8 A 5 U W3 6 6 M6 x 65 AE 6 M W3 1/4 20 UNC x 2-3/4 A 6 U W3 7 7 M6 x 95 AE 7 M W3 1/4 20 UNC x 4 A 7 U W3 8 8 M6 x 118 AE 8 M W3 1/4 20 UNC x 4-3/4 AE 8 U W3 G Group Dimensions ( mm /in) Order Codes DIN D1 D2 E EP (tandard Options) 1 to 8 0 to 8 D1 (teel) / EP (Plastic) 11,8 6,5 7,8 8,6 E (teel) EP (Plastic) A20

21 Components: Dimensions / Order Codes DIN 3015, Part 1 B2 B1 L Group 1 B1 B2 L Group 1A to 8 A Clamps Group Dimensions ( mm /in) Order Codes DIN L B1 B2 (tandard Options) , IG 1 W3 1A , IG 1A W , IG 2 W , IG 3 W , IG 4 W , IG 5 W , IG 6 W , IG 7 W , IG 8 W3 1W3 afety Locking Plate Group 1 Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) Thread G G ex L3 2 G Group Dimensions ( mm /in) Order Codes DIN Thread G L3 min. ex (tandard Options) 1 0 M AF 1/1A/1D M W3 1/4 20 UNC AF 1/1A/1D U W3 1A 1 M AF 1/1A/1D M W3 1/4 20 UNC AF 1/1A/1D U W3 2 2 M AF 2 M W3 1/4 20 UNC AF 2 U W3 3 3 M AF 3 M W3 1/4 20 UNC AF 3 U W3 4 4 M AF 4 M W3 1/4 20 UNC AF 4 U W3 5 5 M AF 5 M W3 1/4 20 UNC AF 5 U W3 6 6 M AF 6 M W3 1/4 20 UNC AF 6 U W3 7 7 M AF 7 M W3 1/4 20 UNC AF 7 U W3 8 8 M AF 8 M W3 1/4 20 UNC AF 8 U W3 AF2UW3 Type of bolt tacking Bolt (according to tandard) AF Group 2 U Metric IO thread M Material code Carbon teel, zinc/nickel-plated W3 tainless teel V2A / (AII 304 / 303) W4 tainless teel V4A / (AII 316 / 316 Ti) tacking Bolts, type AF 1/1A/1D are also suitable for Twin eries, Group 1D. A21

22 DIN 3015, Part 1 Clamp Assemblies: Order Codes Please select the type of installation (e.g. Weld Plates, Rail Nuts, etc.) and add the corresponding Code to position of the order code for your clamp assembly. Without Installation Equipment Code: ingle Weld Plate Code: P Elongated Weld Plate Code: Twin Weld Plate (for Group 1 to 6 only) Code: DP Group Weld Plate (for Group 1 to 6 only) Code: Angled Weld Plate (for Group 1 to 6 only) Code: WP Bridge Weld Plate (for Group 1A to 6 only) Code: BP exagon Rail Nut Code: M Channel Rail Adaptor Code: Please select the required group size and diameter and add the corresponding Code to position of the order code for your clamp assembly. Group Outside Availability of Clamp Diameter Body Materials & Designs P / T / Type Type Type (DIN) (mm) Design RI ACT Code ,4 106, (0) 9,5 109, A (1) 2 (2) 3 (3) 4 (4) 6 106A 6,4 106,4A 8 108A 9,5 109,5A A A 12,7 212,7 13,5 213, ,2 217, ,4 313,4 17,4 317, ,5 320,5 21,3 321, ,9 323, ,4 325, ,7 412, ,2 417, ,9 426, ,6 428, Outside Availability of Clamp Diameter Body Materials & Designs P / T / Type Type (DIN) (mm) Design RI Code 27,8 527, ,7 533, ,7 535,7 (5) ,3 541, ,8 543,8 6 (6) 7 (7) 8 (8) ,3 621, ,9 626, ,5 644,5 48,3 648,3 49,8 649,8 50,8 650, ,2 757,2 60,3 760,3 63,5 763, ,1 776,1 88,9 888, L tandard Option Additional outside diameters are available upon request. Please consult for further information. A22

23 Clamp Assemblies: Order Codes DIN 3015, Part 1 Please see pages A24 and A25 with detailed order examples for some of the most popular tandard eries clamp assemblies. A Clamps Please select the design and material of your clamp body and add the corresponding Code to position of the order code for your clamp assembly. Please check the availability of the selected clamp body design and material according to the matrix table in. Polypropylene Code: PP Polyamide Code: PA Thermoplastic Elastomer (87 hore-a) Code: A Aluminium Code: (for Group 1A to 6 only) Polypropylene Code: PP screws, cover plates, etc.) and add the corresponding Code to position of the order code for your clamp assembly. Cover Plate DP with exagon ead Bolts A Code: Cover Plate DP with ocket Cap crews I Code: afety Locking Plate IG with tacking Bolts AF Code: Inserts EP (Plastic) with exagon ead Bolts AE Code: Please select the required thread type and add the corresponding Code to position of the order code for your clamp assembly. Code: U Metric IO thread Code: M All threaded parts are available with Metric IO thread or metal parts and add the corresponding Code to position of the order code for your clamp assembly. Metal parts made of Carbon teel, untreated Metal parts made of Carbon teel, phosphated Metal parts made of Carbon teel, zinc/nickel-plated W1 W2 W3 Polyamide Code: PA Thermoplastic Elastomer (87 hore-a) Code: A Inserts E (teel) with exagon ead Bolts AE Code: Metal parts made of tainless teel V2A / (AII 304 / 303) Metal parts made of tainless teel V4A / (AII 316 / 316 Ti) W4 Polypropylene Code: (for Group 4 and 6 only) Polyamide Code: (for Group 4 and 6 only) Flame Retardant Polypropylene (PPV0) with Integrated Rubber trips made of Anti Corrosion Elastomer (ACE) Code: ACT (for Group 1A, 2 and 3 only) ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ocket Cap crews I with Washers Code: lotted ead crews LI with Washers Code: (for Group 1 to 6 only) Weld Plate made of Carbon teel, phosphated; Other metal parts made of Carbon teel, zinc/nickel-plated Rail Nuts made of Carbon teel, untreated; Other metal parts made of Carbon teel, zinc/nickel-plated W10 W11 Individual combinations of alternative materials and surface further information. If required, please select an additional assembling and kitting option and add the corresponding Code to the last position of the order code for your clamp assembly. Code: (standard option) Code: (special option) Code: (special option) A23

24 DIN 3015, Part 1 Clamp Assemblies: Order Examples 2x urface: W3 Thread: UNC 1x urface: W3 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: UNC W10 is the standard option for this type of installation. 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: Metric W10 is the standard option for this type of installation. 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: Metric W10 is the standard option for this type of installation. Available up to Group 6 (DIN Group 6) only. 2x urface: W3 Thread: UNC 1x urface: W3 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: UNC U W10 W10 is the standard option for this type of installation. 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: Metric W10 is the standard option for this type of installation. 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W2 Thread: Metric W10 is the standard option for this type of installation. Available up to Group 6 (DIN Group 6) only. 2x urface: W3 Thread: UNC 1x urface: W3 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 2x urface: W3 Thread: UNC 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 2x urface: W3 Thread: Metric 2x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 2x urface: W3 Thread: Metric (Mounting Rail T not included.) U W3 W3 is the standard option for this type of installation. (Mounting Rail T not included.) W3 is the standard option for this type of installation. (Mounting Rail T not included.) W3 is the standard option for this type of installation. Available up to Group 6 (DIN Group 6) only. A24

25 Clamp Assemblies: Order Examples DIN 3015, Part 1 2x urface: W3 Thread: UNC 2x urface: W3 Thread: Metric 2x urface: W3 Thread: Metric 1x urface: W3 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7mm /.50 in Material: Polypropylene with tension clearance 1x Clamp Body (two halves) Group 2 (DIN 2) Tube-O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance A Clamps W3 is the standard option for this type of installation. W3 is the standard option for this type of installation. W3 is the standard option for this type of installation. 2x urface: W3 Thread: UNC 1x urface: W3 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 1x urface: W3 Thread: Metric 1x Clamp Body (two halves) Group 1 (DIN 0) O.D. 6 mm /.24 in Material: Polypropylene with tension clearance Thread: Metric 1x urface: W2 Thread: Metric All threaded parts are available with Metric IO thread or Metric IO thread The below listed material codes describe the materials and tandard eries clamp assemblies. Individual combinations upon request. Consult for further information. U M W3 is the standard option for this type of installation. W10 is the standard option for this type of installation. Metal parts made of Carbon teel, untreated Metal parts made of Carbon teel, phosphated Metal parts made of Carbon teel, zinc/nickel-plated Metal parts made of tainless teel V2A / (AII 304 / 303) Metal parts made of tainless teel V4A / (AII 316 / 316 Ti) W1 W2 W3 W4 2x urface: W3 Thread: UNC 2x urface: W3 Thread: UNC Weld Plate made of Carbon teel, phosphated; Other metal parts made of Carbon teel, zinc/nickel-plated Rail Nuts made of Carbon teel, untreated; Other metal parts made of Carbon teel, zinc/nickel-plated W10 W11 2x Material: Plastic 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7 mm /.50 in Material: Polypropylene with tension clearance 2x Material: Plastic 1x Clamp Body (two halves) Group 2 (DIN 2) O.D. 12,7mm /.50 in Material: Polypropylene with tension clearance Because of their design, Group 1 (DIN Group 0) clamp assemblies only include a single bolt / screw. 1x urface: W2 Thread: UNC 1x urface: W2 Thread: UNC W10 is the standard option for this type of installation. W10 is the standard option for this type of installation. A25

26 DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: Green Material code: PP Colour: Black Material code: PA (87 hore-a) Colour: Black Material code: A Colour: elf-colour Material code: ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. 3006PP 1st part of Group 3 Exact outside diameter Ø D1 (mm) 006 Material code (see below) PP Proven, tested and trusted product in various markets Recommended for the safe installation of rigid pipes and tubes Available for all commonly used pipe and tube outside diameters Environmental protection due to vibration/noise reducing design Excellent weathering resistance, even under extreme conditions Group Outside Diameter Nominal Bore Order Codes Dimensions ( mm /in) Pipe / Tube Copper (2 Clamp Ø D1 Pipe Tube alves) (mm) (in) (in) (in) ( = Material) PP/ PA/A AL min. Width ,4 1/4 3006,4 8 5/ ,5 3/8 1/4 3009,5 10 1/ ,7 1/2 3/8 3012, ,6 30,5 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021, / ,6 30, , ,4 26,9 3/4 4026, / , , / , / ,3 1-1/2 5041, / / ,5 1-3/4 6044,5 48,3 1-1/2 6048,3 50, , ,2 2-1/4 6057,2 60, ,3 63,5 2-1/2 6063, / DIN Additional outside diameters are available upon request. Please consult for further information. A26

27 Components: Dimensions / Order Codes DIN 3015, Part 2 ød1 Clamp Body 1 A Clamps Group Outside Diameter Nominal Order Codes Dimensions ( mm /in) Pipe / Tube Bore (2 Clamp Ø D1 alves) (mm) (in) Pipe (in) ( = Material) PP/PA AL min. Width 60,3 7060, / /2 (ANI B 36-10) , /2 (DIN EN 10220) 7076, ,5 7082,5 88,9 3-1/ ,9 88,9 3-1/ , / / , , , , DIN Additional outside diameters are available upon request. Please consult for further information. Clamp Body 7 PP One clamp body is consisting of two clamp halves. 1st part of Group 7 Exact outside diameter Ø D1 (mm) Material code (see below) PP Colour: Green Material code: PP Colour: Black Material code: PA Colour: elf-colour Material code: ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. Proven, tested and trusted product in various markets Recommended for the safe installation of rigid pipes and tubes Available for all commonly used pipe and tube outside diameters Environmental protection due to vibration/noise reducing design Excellent weathering resistance, even under extreme conditions A27

28 DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA (87 hore-a) Colour: Black Material code: A ee page A88 for material properties and technical information. clamp body materials, tested and approved according to ee page A89 for material properties and technical information. 3006PP One clamp body is consisting of two clamp halves. 1st part of Group 3 Exact outside diameter Ø D1 (mm) 006 Material code (see below) PP Proven, tested and trusted product in various markets Recommended for the safe installation of hoses and cables Chamfered edges avoid damaging of the hose or cable Available for all commonly used hose and cable outside diameters Excellent weathering resistance, even under extreme conditions Group Outside Diameter Nominal Bore Order Codes Dimensions ose ydraulic ose (2 Clamp ( mm /in) Ø D1 AE 100 R2 AT alves) (mm) (in) (in) ( = Material) Width ,4 1/4 3006,4 8 5/ ,5 3/8 3009, ,5 30,5 12,7 1/2 3012, ,5 3013, / / ,2 3017, / / ,8 3/8 4019, ,3 4021, ,1 1/2 4022, ,5 30, ,1 5/8 4025,1 25, ,4 26,9 4026, ,2 3/4 4029, / ,7 5033, / ,3 5041, , , / ,5 1-3/4 6044,5 48,3 6048,3 48,4 1-1/4 6048, , , ,4 1-1/2 6054, ,2 2-1/4 6057,2 60,3 6060,3 63,5 2-1/2 6063, / DIN Additional outside diameters are available upon request. Please consult for further information. A28