HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM
|
|
|
- 한일 영
- 5 years ago
- Views:
Transcription
1 HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM
2 HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) I/O 2. (MANUAL OPERATION) JOG 2.3 MPG (Handle) 2.4 MANUAL ABSOLUTE ON/OFF 3. (AUTOMATIC OPERATION) 3.1 AUTO 3.2 MDI (PROGRAM RESTART) 3.5 DNC 3.6 EDIT (Handle Interrupt) 3.9 (Mirror Image) 3.10 / (Tool Retract / Recover) 3.11 (Retrace) 3.12 / CSCAM
3 HX - Operation Manual MC / TC / CUT / QT 4. (TEST OPERATION) 4.1 MACHINE LOCK 4.2 FEED OVERRIDE 4.3 OVERRIDE 4.4 (DRY RUN) 4.5 (SINGLE BLOCK) 5. (SAFETY FUNCTION) 5.1 (EMERGENCY STOP) 5.2 OVERTRAVEL / SOFT LIMIT 5.3 STORED STROKE CHECK ,, LINE 6.7 (BOOK MARK) 6.8 PLAY BACK 6.9 HELP ( ) (Real TPG) 8.2 (Test TPG) CSCAM
4 HX - Operation Manual MC / TC / CUT / QT (F6) 9.4 (F5) DNC (F1) 12.5 (F2) 12.6 (F3) 12.7 (F4) 12.8 (F5) 12.9 (F6) (F8) HELP (SHIFT+F12) ( ) 13.2 ( ) CSCAM
5 HX - Operation Manual MC / TC / CUT / QT / (Cavity / Core) 14.2 / / CSCAM
6 1.1 MDI unit 1.2 (SOFT KEY). TFT/LCD,. F1 ~ F8.,. 1.3 (RESET KEY) RESET. MDI. Full Key RESET. ESC.
7 . M, S, T ( 0: /1: ) 1.4,,,. 1.5 Ins Del Enter Help Cancel G.. Delete... G. PC keyboard F12.,,. PC keyboard Alt.
8 1.6,,, MDI,,,. PgUp PgDn,. 1.7 Space Home End Ctrl Alt Tab Control Alternate TAB.... PC Base PC Control. Cancel. PC Base PC Alt. Windows PC TAB. 1.8 I/O USB MDI. USB /.
9 2.1 CNC POWER ON. CNC., ZRN(REF1.), JOG. JOG JOG.,. 1. POWER ON. 2. ZRN (ZERO RETURN, REF1.). 3. JOG. MC, Z JOG
10 2.2 JOG JOG. ( ).. 1. RAPID. 2. Metric (mm/min) Inch (inch/min) Metric (mm/min) Inch (inch/min) < 1 : > < 2 : >
11 1. JOG JOG- JOG+. 4. RAPID. 5. (RAPID Override) 30%. 6. LIMIT (Over Travel ) O.T RELEASE. JOG JOG RAPID
12 2.3 MPG (Handle) MPG(Manual Pulse Generator)., X1(1 ), X10(1 X 10 ), X100 (1 X 100 ). MPG 1.( 1 MPG PM[1512~1543].) < 1 : MPG > ) 0.001mm X 1 : [mm/pulse] X 10 : [mm/pulse] X 100 : [mm/pulse] 1. MPG ( Handle ). 2.. MPG X1, MPG X10, MPG X MPG. 5..
13 MPG JOG RAPID
14 2.4 MANUAL ABSOLUTE ON/OFF Manual Absolute ON/OFF,. Switch ON. OFF shift. Manual Absolute ON/OFF. N1 G90 G01 X100. Y100. F100 N2 X200. Y200. N3 X300. Y250. : ON : OFF 1) N1, (X +20, Y +100.), Cycle Start N2. (220, 300) (300, 250) (120, 200) (200,200) : ON : OFF (100, 100) 2) Feed Hold N1 Feed Hold, (Y +70.), Cycle Start N2
15 . (200,270) (300, 320) (300, 250) (120, 200) (200,200) : ON : OFF (120, 130) 3) 1 1. N1 G90 G01 X100. Y100. F100 N2 X200 Y200. : X +20, Y +70 N3 X300. N3 Y300. (320, 370) (300, 300) (220,270) (320, 270) : ON (200,200) (300,200) : OFF (100, 100) 4) OFF.
16 3.1 AUTO ( ), Cycle Start, AUTO, Cycle Start Lamp. AUTO Feed Hold AUTO., Cycle Start. RESET AUTO, RESET. 1. AUTO. 2. F ( Enter) 4. Cycle Start, AUTO Cycle Start Lamp. AUTO
17 Cycle Start Lamp. 5. AUTO. AUTO Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. AUTO, AUTO Reset.,. AUTO AUTO NC Program ,. (buffering). 6.,. 7. 4,5,6 AUTO. AUTO AUTO. M00(Program Stop), M01(Optional Stop) M02, M30 (Program End). Feed Hold.
18 Program Stop (M00) M00, AUTO.. Single Block Modal, Cycle Start AUTO. Optional Stop (M01) M00 M01, AUTO., Optional Stop ON. Program End (M02, M30) Main Program M02 M30, AUTO. M30, M02. Main Program M02 M (M02, M30.). Feed Hold AUTO Feed Hold, AUTO. MDI Panel, AUTO.. Option Block Skip(= Block Delete) Optional Block Skip ON / (slash). /
19 . /, (.). / ON. Optional Block Skip /. 10 /0 ~ /10., /0 /. AUTO
20 3.2 MDI MDI, MDI Program,. Test,, feed. MDI MDI (, F9). 1. MDI. 2. Program Program.. 3. Program Cursor.. Cycle Start. Program. 4. Program End(M02, M30), Program ( ). AUTO. 5. M99, Program.
21 6. MDI. MDI Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. MDI MDI Panel,.,. 7. MDI, AUTO AUTO. Program MDI Program. PA[3] MDI 0, MDI MDI. PA[3] 1 MDI POWER OFF. F7.
22 MDI Cursor. MDI Program MDI Program. 1. MDI,. 2. MDI. 3. MDI. MDI
23 3.3 LAN. PC AUTO. 1. F ( 7 ) 3. PC. 4. PC NC. 5. AUTO AUTO Cycle Start. 1. AUTO. (=AUTO )
24 3.4 (PROGRAM RESTART) AUTO RESET,,.. 1. MDI,, Feed Cycle Start. 2. EDIT. F7 UTILITY. 3. MDI (G54 ~ G59), Feed, G code. 4. AUTO, Cycle Start. 5. EDIT RESET. RESET AUTO RESET,.( PI[133] ) (0), (1), (2) 3. PI [133] 0 : RESET., /. MDI Feed Cycle Start, AUTO Cycle Start..
25 1 : 2 : RESET.. EDIT Word AUTO Cycle Start. RESET. Cycle Start. 1. RESET, Feed. AUTO
26 3.5 EDIT EDIT AUTO AUTO.. 1. EDIT. 2. AUTO Feed Hold EDIT. 3. (PA[323]) (PA[323]) 1 F3. 5. F3 6. Background AUTO loading.
27 1. EDIT (Background Edit). 2. EDIT RESET. 3. EDIT AUTO Cycle Start. EDIT
28 ( F5 F6 ) /. 5. AUTO. 6. Cycle Start RESET EMG-STOP.. Cycle Start. 9. RESET /.
29 MDI. Input Enter F2..
30 F3.. F4.. F5.., F6 / F7.
31 . F8 /. : F8. Ladder
32 3.8 (Handle Interrupt) AUTO MPG. (Handle Interrupt) AUTO (Handle Interrupt) ON, MPG. 1. MPG MPG (x 1, x 10, x M, x N), MPG... Interlock Mirror Image Interlock. Interlock ON,. Mirror Image. Mirror Image ON, Plus(+) Interrupt. Data.
33 (Absolute) (Relative) (Machine) (=Absolute )..., Page Up Key. Clear RESET, (M30, M02), (G54~G59) 0.
34 3.9 (Mirror Image) Mirror Image ON AUTO Mirror Image. 1. Single Block, AUTO. Mirror Image. 2. Mirror Image. 3. AUTO, Cycle Start AUTO. Mirror Image Maker. Mirror Image G code Mirror Image (G51). 1., Cycle. 2. AUTO Mirror Image G00, G01, G02, G03, G31.x. ) (Mirror Image) G51, ( PI[149], PI[108~116]) G51.( factor (Mirror Image).)
35 3.10 / (Tool Retract / Recover) AUTO / 1. AUTO [ ] ON. AUTO AUTO. &. 2.. JOG, MPG , 10 point.,. 10.
36 1.,. 2., AUTO [] ON. DRY RUN point,.(single Block ) 4., Feed Hold. 5. Cycle Start. 2. RESET Data,. / TLMODL [F64.08] TLESCL [F64.09] TRRTN [G79.11] HIGH. TLRTNL [F64.0A]
37 TLESC [G] TLMODE [F] TLESCL [F] TLRTN [G] TLRTNL [F]
38 3.11 (Retrace) AUTO [ ] Program. Program. 50. ON/OFF RVS ( ) [G39.8] RVSL ( ) [F30.8] AUTO
39
40 3.12 / PLC Custom Macro,. / AUTO.,. 1. AUTO M code( ).( 4 ) 2. AUTO RESET EMG-STOP. 4 #8064 = #6205 #8065 = #6206 M99
41 4.1 MACHINE LOCK.. 1. MACHINE LOCK ON MACHINE LOCK M, S, T. 2. MACHINE LOCK.( Maker ) 3. MACHINE LOCK ON MACHINE LOCK OFF. 4. MACHINE LOCK OFF.
42 4.2 FEED OVERRIDE Feed 0% 250% 10%. FEED OVERRIDE. Maker 32 OVERRIDE. 1. FEED OVERRIDE %. 1. FEED OVERRIDE (100%) Feed. 2. OVERRIDE CANCEL ON FEED OVERRIDE 100%.
43 4.3 OVERRIDE 0%, 25%, 50%, 100%. Maker 32 OVERRIDE RAPID %. 2. OVERRIDE. G00 G27,G28, G30
44 4.4 (DRY RUN). DRY RUN JOG DRN(DRY RUN) ON. 3. DRY RUN. 4..
![4.5 (SINGLE BLOCK) AUTO, DNC MDI. PI[83] PI[84]. 1.](/docs-images/101/151794999/images/45-0.jpg "SBK(Single Block) ON. 2. Cycle Start. 3. Cycle Start. 4.")
45 4.5 (SINGLE BLOCK) AUTO, DNC MDI. PI[83] PI[84]. 1. SBK(Single Block) ON. 2. Cycle Start. 3. Cycle Start
46
47 5.1 (EMERGENCY STOP). 1. EMERGENCY STOP PLC. 3. EMERGENCY STOP.
48 5.2 OVERTRAVEL / SOFT LIMIT SOFT LIMIT stroke stroke OVERTRAVEL. SOFT LIMIT stroke stroke SOFT LIMIT. SOFT LIMIT. SOFT LIMIT 2. (PM[3378 ~ 3409], PM[3410~3472] ) SOFT LIMIT OVERTRAVEL. 1. OVERTRAVEL O.T RELEASE JOG MPG stroke. 2. SOFT LIMIT stroke.
49 5.3 STORED STROKE CHECK (Stored Stroke). /. 2 (PM[3474], PM[3475] /, PM[3476~3481] ), G22 X_ Y_ Z_ I_ J_ K_, G / 0 1,. 2. G22 X_Y_ Z_ I_J_ K_. 3. G22. 4.,.
50 F3. 2. F3. 3.,. (.NC), NC.
51 4. F1. 5. ENTER,.
52 1 EDIT _AUTOSAVE.NC NC., AUTO loading MB (CE 3MB). 2.,. TAB. 3..
53 6.2.,. F2. 1. F ( ) F4..
54 3.. F1 ( )..(.) 2 ( ).
55 6.3,.,. 1.,,,. G00 X100 (Y20).. G00 Y20 X100 2.,,,. G00 Y20 X100 DEL. G00 Y Windows Ins, Ins Insert.
56 6.4,,,,,. WINDOWS. 1. /. G00 X100 G01 Y10.1 Z10.3 SHIFT,,, Page Up, Page Down. ( Drag.) G00 X100 G01 Y10.1 Z10.3 SHIFT G00 X100 G01 Y10.1 Z10.3, DEL. 3.
57 2. G00 X100 G01 Y10.1 Z10.3 Ctrl C G00 X100 G01 Y10.1 Z10.3 Ctrl X. Z ,,,. G00 X100 G01 Y10.1 Z10.3 Ctrl V. G00 X100 G01 Y10.1 Z10.3 G00 X100 G01 Y10.1
58 6.5,. ENTER.. 1 ( ) 1. UTIL >> F7, F ENTER.(.) CANCEL
59 RESET. 3. (Space ) /. 2 ( ) 1. UTIL >> F7, F2. 2.,., TAB, ENTER. TAB ENTER..
60 3. (Space ) / /. 4...,... Ctrl,,,.
61 6.6 LINE. 1. UTIL >> F7, F ENTER.
62 6.7 (BOOK MARK). 1. UTIL >> F7. Ctrl F , Ctrl F4. (, Toggle.) 3. F4. 4. Shift F4.
63 6.8 PLAY BACK 1. JOG MPG. 2.. X 3. PLAY BACK Play Back.. X X0.000 Y Z
64 6.9 HELP 1. G code G code MDI HELP G code HELP. 2. G code HELP F2 G code. 3. HELP /Help htm. G code HELP. 4. G code HELP G htm. G htm. 5. M code 2000.htm
65 . 6. M code MDI HELP M code HELP.
66 7.1.. AUTO. 1. F8. 2. NC 20. NC. 3.,. (comment). 4. Enter ( ). 5. NC. Enter,... NC NC DIR.
67 6.
68 7.2.,,. 1. F8. 2.,,,. 3. F1, F ( F7 ) F R S. C.. (.NC ) Enter.
69 F8. 2.,,,.. 3. F3. 4. Y/N. Y, N 5. Y. 6. AUTO.
70 F8. 2.,,,.. 3. F5. 4..( ) Enter. 5..
71 7.5 ( ).,. 1. F8. 2.,,,.. 3. F6.. Enter..NCT
72 8.1 (Real TPG).. MDI. HMI PP[20] TPG (0: /1: /2:NCT ). NC..(:, :, : ), (PA[409] Real TPG : ), (PA[407] Real TPG ) (PA[408] Real TPG ).
73 1. F1. 2. AUTO DNC, F1.. (.) 3.. : PgUp.(.) : PgDn. (.) Zoom All : ZoomAll F5.. View : View F3.. XYZ, XY, YZ, ZX 4 View. () :. View F4.
74 .,,,. ENTER, View F4. ( ) :,.,,,.(
75 .) : F (.).., F7 () clear.
76
77
78 8.2 (Test TPG).,. MLK(Machine Lock). M(M02, M03 ), S, T.. 2. F1. 3.,. 4.. : PgUp.( drag In) : PgDn. ( drag Out)
79 Zoom All : ZoomAll F5. View : View F3.. XYZ, XY, YZ, ZX 4 View. () : 8.1. :,.,,,. : F7. 5. F1. F2... F ).
80 9.1 (F1) F :. : G_ : PLC, F_ :.. : : : PgUp PgDn. 5. :
81 . F2..
82 9.2 (F8), / F6, F ,.. : 1111,. : : 407.
83 9.3 (F6) Password. (X, Y, G, F, R, T, C, D).. F1, F2, TAB.
84 . Enter(Input) Key,,... S : 0~31 bit 1. Bit 16 hexadecimal). R : 0~31 bit 0 clear. Bit 16 (hexadecimal). D : 10. H : 16 (hexadecimal). Enter(Input) Key ENTER.
85 USER User. F4 USER., X5, G5, G8, X-Y X 0005 F4 User, G5,G8., USER., USER F4. USER HX clear.
86 9.4 (F5) 1. Timing Chart Servo Graph Plot. Plot Mode. / /. Trigger Rising Time. Plot Plot. Servo Graph Mode PLC Timing Chart Mode. Plot, X, Y Grid,.
87 CUR/SEL Cursor. Plot.. F1, F2,. 2. Mode (1) Servo Graph Mode Feed,..
88 (2) PLC Timing Chart Mode PLC ON/OFF Timing. Bit Data ON/OFF Data. Data.. Auto Scale, Y Scale. 3. / (F1). / Config. / (F2) Data /. / HX.
89 Auto Scale (F3) Scale. Auto Scale Config Y Zoom Step 1/5. PLC Timing Chart Mode. CUR/SEL (F4) Plot. CUR/SEL, Plot. ( ) Plot. X Zoom (F5) Plot., CUR/SEL ( ). CUR/SEL. CUR/SEL Cursor Select. Cursor X- Zoom Cursor Plot. CUR/SEL.
90 Config (F6) Config. Plot,. Config HX Config.txt. Mode Select Server Graph Mode PLC Timing Chart Mode Mode. X Grid Plot X Grid. Y Grid Plot Y Grid. Y Zoom Step.. Map Name Map. Number Map. Start Bit
91 Map. bit Hex-decimal. End Bit Map. bit Hex-decimal. Scale. Plot. Use. Tirgger (F7) Tirgger. Trigger Rising Time. Tirgger Trigger. Trigger. Rising Edge, Falling Edge, Level. Value Trigger. Ch
92 Trigger Channel. Rising Time Rising Time. Rising Time. First Val Rising Time. Second Val Rising Time. (F8) Plot. Auto Scale Y Scale. Sclae Move (, )..
93 ),, 1, 2 2),,, I/O,, HMI. (TAB), F1,F2. PageUp/PageDown.,,,..,.
94 F1 ( ), F2 ( ).
95 10.2 NC. TPG DNC H/W.. G code / M code I/O In/Out. I/O ID I/O.
96 . Laser Z gap Trace Sensor. Quilting. HMI HMI(Human Machine Interface).,. ) 32, (F3, F4)..
97
98 10.3. F6. 1. Map Name. 2. Tab Index.. ENTER. 3., PS map (1 ~ 32 ).
99 (, )
100 11.1 DNC RS232C COM1 PC. 1. ( F4 ). :. COM1, COM2.. Baudrate : , Parity Bit :. ISO Even. Data Bit :. ISO 7 Bits. Stop Bit : 1. 1 Bit. EOT Code : End Of Transmission.. 0x14 (DC4).
101 ,. FLOW CTRL : / X-ON/X-OFF. ( DC1, DC3.) / EOB (End Of Block) LF. X-ON.
102 2. 1. DNC. <DNC > <DNC > 2. F3.
103 3.. ( ) NC.. NC DIR. 4.,, ENTER , F5. F8. ( X-ON.) 7. Serial (, ),. F8. Error.
104 8..
105 3. 1. DNC. <DNC > F3.
106 ENTER. (). 5. F5. F8. ( X-ON.) 6. Serial (, ), EOT ( EOT, ). Error.
107 , ( MDI ) ENTER , F6 F7, F4 F5.
108 3., / F8. ( F8.) Cycle Start.
109 12.1 (F9), (F10)., MDI MDI, DNC. 1.,,. F1 F1 F2 Offset F8 F2 F8 F3 F4 F5 F6 F7 USER DEFINE F8 F1 DNC F6 F1 F4 F5 F6 F7 F7 F8 F8
110 2. ( ) F1 F2 F1 F2 F3 F4 F8 F3 F8 F4 F5 F1 DNC F6 F6 F1 F4 F7 USER DEFINE F8 F5 F6 F7 F7 F8
111 HX-Series.,,,,,. 2. PG :. PG : DNC, EDIT, AUTO, MDI, JOG, MPG, STEP, ZRN. 4.. ON. 5.,,.
112 12.3 (, F9). Page Down., Feed,. 1.,. (,, ) Feed, Spindle Override,. (F9) 1.
113 2. (,,,, ) Feed, Override,. G code 1 Page Down. DNC.
114 12.4 (F1). (F1)..,,. View F3. View F4. ZoomAll F5 /. F7. F8. 8.
115 12.5 (F2),, ( ),. 64.
116 . ( ) (GX, GZ) (WX, WZ),. 64. (U_, W_).
117 . G54~ G59 (Shift),. 13.
118 . 120 ( ),.
119 . (F2 F8) (#100~#199) (#200~#699). GLOBAL #100 ~ # (RESET POWER OFF 0 clear.) GLOBAL #200 ~ #699. (POWER OFF ), F8.
120 12.6 (F3). (F3) NC.,, Feed,.,. F8. 6.
121 . (F3 F8) Simulation. F1 F2 F6 Simulation,,. View F3. View F4. ZoomAll F5 /. F7. 8.
122 12.7 (F4). (F4) System.,, 1, 2,,,, I/O,, HMI 10. ( ), F1 F2. 32., F3 F4. (,.) F7. 1. F8 SERCOS interface. 10.
123 12.8 (F5) DNC. (F5 F1) RS 232C NC. 11.
124 . (F5 F6). 3.
125 12.9 (F6). (F6 F1), PgUp PgDn 10. : G_ F_ PLC. (G_00000: PLC, F_xxxxx : )
126 . (F6 F4) Monitoring. 1. 1, 2,, 4,. Read-Only.. ( ), F1, F2.
127 . (F6 F5)
128
129 .(F6 F6). X-Y, G-F, R, T, C, D 6, USER., MDI F1 F2. USER USER / F4.. USER. USER USER F4..
130 (Ladder). (F6 F6 F7). Ladder., - -., X100 11, X100.0A. 16 (HEXA-Decimal) 2. ENTER.
131 . (F6 F7) HX.
132 . (F6 F8).., 9. HX. (F2)
133 12.10 (F8). (F8). Shell (,, ).,,... 7.
134 . (F8 F8) Cavity Core. HX NC COCA. 13.
135 12.11 HELP (SHIFT+F12)
136
137 13.1 ( ) 64.. Shift. 1. F ENTER. 3. :
![4. : (0-9). / 3, 2. 5. GX : X X. I -30 I [+ (-30) ]. X 0 clear. 6.](/docs-images/101/151794999/images/138-0.jpg "GZ : Z. GX. Z 0 clear. 7. :. 8. Z Shift : Z. Z.. Shift Z. 9.")
138 4. : (0-9). / 3, GX : X X. I -30 I [+ (-30) ]. X 0 clear. 6. GZ : Z. GX. Z 0 clear. 7. :. 8. Z Shift : Z. Z.. Shift Z. 9. :, 0 Shift, 1.
139 N1 T0101 N2 G0 X60.Z0. N3 G1 Z-10. F0.1 N4 G0 X70. Z100. N5 T0202 N6 G0 X70. Z50., 1 GX : 0., GZ : 0. 2 shift 60 (70,50) (70,100)->(70,90) N5 (70,90) 1 (70,100) (70,50) (70,100) 2 N5 X 5mm, Z -10mm. (70,100) Z (). 3. GZ [I0] [INPUT]. 4., X () Z.
140 GX. 7. GX, [I] [ ] [INPUT].. X. ) ( ) X X : ( - : ) GX : ( + : ) GX : Z Z : GZ :
141 13.2 ( ) 64.,.., (U, W )..
142 13.3 G54 G59.. (G54 ~ G59). 0: /1: RESET RESET.,. Shift. 1. F G54 ~ G59 Enter. 4. G54 ~ G59, I
143 ,., I Shift, (0, 0, 0), 0 Enter. (X,Y,Z) (X,Y,Z) (X,Y,Z) G54 G59 Shift (X,Y,Z) Shift Shift
144 7. Shift Shift. Shift, (G54~G58) (G92) Shift. Shift (1) Shift (0) 0 1 Enter. G54 G54 ~ G59
145 13.4 F2, F2. Enter.
146 13.5 NC.,.. RESET clear. F2, F8.,, F8. Enter. #100 ~ # , #200 ~ #
147 14.1 / (Cavity / Core) 2.5 / 2.5 / NC. HX NC CNC. / F3. / F4,. / F5. F6 NC. NC \NC\CoCa\
148 14.2 / /. (Profile Curve) 1 ~ ~ 6..,...,, Z 1. F5 /..., Enter.
![14.3 F4 / 2.5.. 1) [ Pocket Milling ], NC.](/docs-images/101/151794999/images/149-0.jpg ": X : Y : : X - Y 2) [ Pocket Milling ], NC.")
149 14.3 F4 / ) [ Pocket Milling ], NC. : X : Y : : X - Y 2) [ Pocket Milling ], NC. :.
150 3) [ X0, Y0, Z0 ]. : X. : Y. : X X. 4) Y Y Y X NC. (.) : Y : X : : X X.
151 ,,, - -, -,. 1) pocket [ Core ]. : mm. :. 2). [ ]. :. :. :.
152 3). [ ]. :. :. :. 4). :. 1 :. :. 2 :.
153 5).. :. :. 1 :. 2 :. 6).. :. :. 1 :. 2 :
154 14.5 1) [ Cavity ] [ Core ]. :. : 2) Z-X Z - X [ 1 ] [ 2 ]. : [Y ]. 1 : X 0 [ ] 2 : X [ ]
155 3) X - Y. ( /.) :. : X. Y : Y Offset. : Y. :. : X-Y. 4). ( /.) : X 0. : :. : :
156 14.6,, [ ] NC Code. [ Feed-Rate ], [ RPM ] 1. F5 /.. 1) [Flat End Mill] End Mill, :. FEED :. :. : 1. : Step-Over.. 2) [Ball End Mill] End Mill,..
157 :. FEED :. :. : 1. : Step-Over 3) [Null End Mill] End Mill Champer,. 1 :. 2 :. FEED :. :. : 1. : Step-Over.
158 14.7 /
CSCAM 800S Operation Manual for MC / TC / CUT / QT Serial No. : OP
CSCAM 800S Operation Manual for MC / TC / CUT / QT Serial No : OP-20141101 800S - Operation Manual MC / TC / CUT / QT 목차 1 MDI 판넬및외부 I/O 장치 ---------------------------------------------------------------------------------7
HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) I/O 2. (MANUAL OPERATION)
HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) 1.4
歯TC프로그래밍매뉴얼
Turning Center (TC) HX - Programming Manual Serial No. : PG-20011119 HX - Programming Manual Turning Center (TC) 1...!. 2 (Program)...19 3 (G )...33 4 (Interpolation Functions)...37 5 (Feed Function)...73
High Performance and Heavy Duty Turning Center Combining rigid slant bed construction with advanced technology for superior machining of middle to large sized workpieces. 2 DOOSAN Infracore Products PUMA
Massive yet responsive turning centers without compromise. The most powerful machines in their class. 02 Powerful, Heavy Duty Turning Center Powerful, Heavy Duty Turning Center 03 PUMA 480 series PUMA
Massive yet Responsive Most Powerful Machines in Their Class. 02 Heavy Duty Turning Center Heavy Duty Turning Center 03 PUMA 600/700/800 1800 r/min (PUMA 600) 45 kw [Gear Box] PUMA 600/600L/600M/600LM
SRC PLUS 제어기 MANUAL
,,,, DE FIN E I N T R E A L L O C E N D SU B E N D S U B M O TIO
LCD Display
LCD Display SyncMaster 460DRn, 460DR VCR DVD DTV HDMI DVI to HDMI LAN USB (MDC: Multiple Display Control) PC. PC RS-232C. PC (Serial port) (Serial port) RS-232C.. > > Multiple Display
歯FDA6000COP.PDF
OPERATION MANUAL AC Servo Drive FDA6000COP [OPERATION UNIT] Ver 1.0 (Soft. Ver. 8.00 ~) FDA6000C Series Servo Drive OTIS LG 1. 1.1 OPERATION UNIT FDA6000COP. UNIT, FDA6000COP,,,. 1.1.1 UP DOWN ENTER 1.1.2
untitled
1... 2 System... 3... 3.1... 3.2... 3.3... 4... 4.1... 5... 5.1... 5.2... 5.2.1... 5.3... 5.3.1 Modbus-TCP... 5.3.2 Modbus-RTU... 5.3.3 LS485... 5.4... 5.5... 5.5.1... 5.5.2... 5.6... 5.6.1... 5.6.2...
서보교육자료배포용.ppt
1. 2. 3. 4. 1. ; + - & (22kW ) 1. ; 1975 1980 1985 1990 1995 2000 DC AC (Ferrite) (NdFeB; ) /, Hybrid Power Thyrister TR IGBT IPM Analog Digital 16 bit 32 bit DSP RISC Dip SMD(Surface Mount Device) P,
0.1-6
HP-19037 1 EMP400 2 3 POWER EMP400 4 5 6 7 ALARM CN2 8 9 CN3 CN1 10 24V DC CN4 TB1 11 12 Copyright ORIENTAL MOTOR CO., LTD. 2001 2 1 2 3 4 5 1.1...1-2 1.2... 1-2 2.1... 2-2 2.2... 2-4 3.1... 3-2 3.2...
歯메뉴얼v2.04.doc
1 SV - ih.. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 - - - 23 24 R S T G U V W P1 P2 N R S T G U V W P1 P2 N R S T G U V W P1 P2 N 25 26 DC REACTOR(OPTION) DB UNIT(OPTION) 3 φ 220/440 V 50/60
T100MD+
User s Manual 100% ) ( x b a a + 1 RX+ TX+ DTR GND TX+ RX+ DTR GND RX+ TX+ DTR GND DSR RX+ TX+ DTR GND DSR [ DCE TYPE ] [ DCE TYPE ] RS232 Format Baud 1 T100MD+
02 High Productivity Turning Center High Productivity Turning Center 03 Lynx 220 series Lynx 220A / C : 6000 / 4000 r/min Lynx 220MA[LMA] / MC[LMC] : 6000 / 4500 r/min Lynx 220LSA[LMSA] / LSC[LMSC] : 6000
한글사용설명서
ph 2-Point (Probe) ph (Probe) ON/OFF ON ph ph ( BUFFER ) CAL CLEAR 1PT ph SELECT BUFFER ENTER, (Probe) CAL 1PT2PT (identify) SELECT BUFFER ENTER, (Probe), (Probe), ph (7pH)30 2 1 2 ph ph, ph 3, (,, ) ON
Heavy Duty Vertical Machining Center 02 Heavy Duty Vertical Machining Center
Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center 02 Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center 03 Mynx 5400 / 6500 / 7500 04 Heavy Duty Vertical
PRO1_09E [읽기 전용]
![PRO1_09E [읽기 전용]](/thumbs/88/115329251.jpg "PRO1_09E [읽기 전용]")
Siemens AG 1999 All rights reserved File: PRO1_09E1 Information and - ( ) 2 3 4 5 Monitor/Modify Variables" 6 7 8 9 10 11 CPU 12 Stop 13 (Forcing) 14 (1) 15 (2) 16 : 17 : Stop 18 : 19 : (Forcing) 20 :
목차 제 1 장 inexio Touch Driver소개... 3 1.1 소개 및 주요 기능... 3 1.2 제품사양... 4 제 2 장 설치 및 실행... 5 2.1 설치 시 주의사항... 5 2.2 설치 권고 사양... 5 2.3 프로그램 설치... 6 2.4 하드웨
최종 수정일: 2010.01.15 inexio 적외선 터치스크린 사용 설명서 [Notes] 본 매뉴얼의 정보는 예고 없이 변경될 수 있으며 사용된 이미지가 실제와 다를 수 있습니다. 1 목차 제 1 장 inexio Touch Driver소개... 3 1.1 소개 및 주요 기능... 3 1.2 제품사양... 4 제 2 장 설치 및 실행... 5 2.1 설치 시
MAX+plus II Getting Started - 무작정따라하기
무작정 따라하기 2001 10 4 / Version 20-2 0 MAX+plus II Digital, Schematic Capture MAX+plus II, IC, CPLD FPGA (Logic) ALTERA PLD FLEX10K Series EPF10K10QC208-4 MAX+plus II Project, Schematic, Design Compilation,
s SINUMERIK 840C Service and User Manual DATA SAVING & LOADING & & /
SINUMERIK 840C Service and Uer Manual DATA SAVING & LOADING & & / / NC, RS232C /. NC NC / Computer link () Device ( )/PC / / Print erial Data input RS232C () Data output Data management FLOPPY DRIVE, FLOPPY
Smart Power Scope Release Informations.pages
v2.3.7 (2017.09.07) 1. Galaxy S8 2. SS100, SS200 v2.7.6 (2017.09.07) 1. SS100, SS200 v1.0.7 (2017.09.07) [SHM-SS200 Firmware] 1. UART Command v1.3.9 (2017.09.07) [SHM-SS100 Firmware] 1. UART Command SH모바일
EM300_Manual.indd
보증서 재중 (WITH WARRANTY CARD) EM30020100702 준 비(안전을 위한 주의사항) 안전을 위한 주의사항 샤프 전자사전을 구입해 주셔서 대단히 감사합니다. 안전하게 기기를 사용하기 위해 안전을 위한 주의사항을 반드시 읽어 주십시오. TFT 컬러LCD에 관하여 TFT 컬러 LCD는 매우 정밀한 기술로 만들어졌습니다. 화면에서 밝거나 어두운
Twin Spindle and Turrets for High Productivity 2 Doosan Infracore Products
Twin Spindle and Turrets for High Productivity 2 Doosan Infracore Products PUMA TTseries 3 PUMA TT 2000S/MS/SY 5,000 rpm PUMA TT 2000S/MS/SY 22 kw 4,000 rpm 26 kw Perfect integral motor driven spindles.
DioPen 6.0 사용 설명서
1. DioPen 6.0...1 1.1...1 DioPen 6.0...1...1...2 1.2...2...2...13 2. DioPen 6.0...17 2.1 DioPen 6.0...17...18...20...22...24...25 2.2 DioPen 6.0...25 DioPen 6.0...25...25...25...25 (1)...26 (2)...26 (3)
"Global Leader of CNC Vertical lathe and turning center for the optimal solutions" -K series is a cost-effective model to achieve high turning capabil
www.kdm-korea.co.kr Head office and Factory #154 Gang-ri, Jangma-myeon, Changnyeong-gun, Gyeongnam, Korea, 635-871 Tel : +82-55-536-356~8 Fax : +82-55-536-359 China office Rm82, No.3 Building, Lane9, Jiuxingong
Orcad Capture 9.x
OrCAD Capture Workbook (Ver 10.xx) 0 Capture 1 2 3 Capture for window 4.opj ( OrCAD Project file) Design file Programe link file..dsn (OrCAD Design file) Design file..olb (OrCAD Library file) file..upd
슬라이드 1
사용 전에 사용자 주의 사항을 반드시 읽고 정확하게 지켜주시기 바랍니다. 사용설명서의 구성품 형상과 색상은 실제와 다를 수 있습니다. 사용설명서의 내용은 제품의 소프트웨어 버전이나 통신 사업자의 사정에 따라 다를 수 있습니다. 본 사용설명서는 저작권법에 의해 보호를 받고 있습니다. 본 사용설명서는 주식회사 블루버드소프트에서 제작한 것으로 편집 오류, 정보 누락
untitled
R&S Power Viewer Plus For NRP Sensor 1.... 3 2....5 3....6 4. R&S NRP...7 -.7 - PC..7 - R&S NRP-Z4...8 - R&S NRP-Z3... 8 5. Rohde & Schwarz 10 6. R&S Power Viewer Plus.. 11 6.1...12 6.2....13 - File Menu...
B _01_M_Korea.indb
DDX7039 B64-3602-00/01 (MV) SRC... 2 2 SRC % % % % 1 2 4 1 5 4 5 2 1 2 6 3 ALL 8 32 9 16:9 LB CD () : Folder : Audio fi SRC 0 0 0 1 2 3 4 5 6 3 SRC SRC 8 9 p q w e 1 2 3 4 5 6 7 SRC SRC SRC 1 2 3
CL100B_manual_kor_m.0.2.indd
ULTIMATE SAMRT CAR BLACK BOX BLACKSYS CL-100B USER MANUAL 2CH Full HD Car DVR with brilliant image Simultaneous recording of front with Full HD resolution (1920x1080, 25fps) and rearview with HD resolution
PRO1_02E [읽기 전용]
![PRO1_02E [읽기 전용]](/thumbs/90/102160748.jpg "PRO1_02E [읽기 전용]")
Siemens AG 1999 All rights reserved File: PRO1_02E1 Information and 2 STEP 7 3 4 5 6 STEP 7 7 / 8 9 10 S7 11 IS7 12 STEP 7 13 STEP 7 14 15 : 16 : S7 17 : S7 18 : CPU 19 1 OB1 FB21 I10 I11 Q40 Siemens AG
PCServerMgmt7
Web Windows NT/2000 Server DP&NM Lab 1 Contents 2 Windows NT Service Provider Management Application Web UI 3 . PC,, Client/Server Network 4 (1),,, PC Mainframe PC Backbone Server TCP/IP DCS PLC Network
10X56_NWG_KOR.indd
디지털 프로젝터 X56 네트워크 가이드 이 제품을 구입해 주셔서 감사합니다. 본 설명서는 네트워크 기능 만을 설명하기 위한 것입니다. 본 제품을 올바르게 사 용하려면 이 취급절명저와 본 제품의 다른 취급절명저를 참조하시기 바랍니다. 중요한 주의사항 이 제품을 사용하기 전에 먼저 이 제품에 대한 모든 설명서를 잘 읽어 보십시오. 읽은 뒤에는 나중에 필요할 때
PRO1_04E [읽기 전용]
![PRO1_04E [읽기 전용]](/thumbs/91/104875613.jpg "PRO1_04E [읽기 전용]")
Siemens AG 1999 All rights reserved File: PRO1_04E1 Information and S7-300 2 S7-400 3 EPROM / 4 5 6 HW Config 7 8 9 CPU 10 CPU : 11 CPU : 12 CPU : 13 CPU : / 14 CPU : 15 CPU : / 16 HW 17 HW PG 18 SIMATIC
Manufacturing6
σ6 Six Sigma, it makes Better & Competitive - - 200138 : KOREA SiGMA MANAGEMENT C G Page 2 Function Method Measurement ( / Input Input : Man / Machine Man Machine Machine Man / Measurement Man Measurement
Microsoft Word - Installation and User Manual_CMD V2.2_.doc
CARDMATIC CMD INSTALLATION MANUAL 씨앤에이씨스템(C&A SYSTEM Co., Ltd.) 본사 : 서울특별시 용산구 신계동 24-1(금양빌딩 2층) TEL. (02)718-2386( 代 ) FAX. (02) 701-2966 공장/연구소 : 경기도 고양시 일산동구 백석동 1141-2 유니테크빌 324호 TEL. (031)907-1386
untitled
Huvitz Digital Microscope HDS-5800 Dimensions unit : mm Huvitz Digital Microscope HDS-5800 HDS-MC HDS-SS50 HDS-TS50 SUPERIORITY Smart Optical Solutions for You! Huvitz Digital Microscope HDS-5800 Contents
TEL: 042-863-8301~3 FAX: 042-863-8304 5 6 6 6 6 7 7 8 8 9 9 10 10 10 10 10 11 12 12 12 13 14 15 14 16 17 17 18 1 8 9 15 1 8 9 15 9. REMOTE 9.1 Remote Mode 1) CH Remote Flow Set 0 2) GMate2000A
Remote UI Guide
Remote UI KOR Remote UI Remote UI PDF Adobe Reader/Adobe Acrobat Reader. Adobe Reader/Adobe Acrobat Reader Adobe Systems Incorporated.. Canon. Remote UI GIF Adobe Systems Incorporated Photoshop. ..........................................................
DDX4038BT DDX4038BTM DDX4038 DDX4038M 2010 Kenwood Corporation All Rights Reserved. LVT A (MN)
DDX4038BT DDX4038BTM DDX4038 DDX4038M 2010 Kenwood Corporation All Rights Reserved. LVT2201-002A (MN) 2 3 [ ] CLASS 1 LASER PRODUCT 4 1 2 Language AV Input R-CAM Interrupt Panel Color Preout
11111111111111111111111111111111111111111111111111111111111111111111111111111
서울시 금천구 가산동 448 대륭테크노타운 3차 301호 전화 : (02)838-0760 팩스 : (02)838-0782 메일 : support@gyrosoft.co.kr www.gyrosoft.co.kr www.gyro3d.com 매뉴얼 버전 : 1.00 (발행 2008.6.1) 이 설명서의 어느 부분도 자이로소프트(주)의 승인 없이 일부 또는 전부를 복제하여
B _02_M_Ko.indd
DNX SERIES DNX560 DNX560M DDX SERIES DDX506 DDX506M B64-467-00/0 (MW) DNX560/DNX560M/DDX506/DDX506M 4 DNX560/DNX560M/DDX506/DDX506M NAV TEL AV OUT % % % % CD () : Folder : Audio fi 5 6 DNX560/DNX560M/DDX506/DDX506M
개요 AXSR5 레코더에 연결 시 NEXFS700 전용 RAW 포맷으로 변환되어 AXSR5 에서 녹화됩니다(PMWF55, F65 용 RAW 포맷과 다름). 또한 이 제품의 간단한 플레이백 기능을 사용하여 AXSR5에서 레코딩 된 비디오를 볼 수 있습니다. 플레이백 되는
446648911(1) 휴대용 메모리 레코더 인터페이스 유닛 사용 설명서 HXRIFR5 개요 AXSR5 레코더에 연결 시 NEXFS700 전용 RAW 포맷으로 변환되어 AXSR5 에서 녹화됩니다(PMWF55, F65 용 RAW 포맷과 다름). 또한 이 제품의 간단한 플레이백 기능을 사용하여 AXSR5에서 레코딩 된 비디오를 볼 수 있습니다. 플레이백 되는 영상은
Plc\PLC-p
GP GP-PRO/PB III for Windows Ver. 4.0] (1) [ GP-PRO/PB III for Windows Ver. 4.0] ( Digital Electronic (2) (Readme.txt files ) Copyright 2000 Digital Electronics Corporation. All rights reserved. Digital
This page left blank intentionally
User s Manual Manuel d utilisation Bedienungsanleitung Manual de usuario Manuale d'istruzioni Gebruiksaanwijzing Instruções do Proprietário Bruksanvisningens Руководство пользователя Regulatory models:
LEO LEO 1600 ver. KO SU 1 / 1
6 ver. KO 1803 SU 1 / 1 / / CNC 안정적인가공지원을위해 30 도경사베드구조와모든이송축에고강성롤러타입 LM 가이드를적용하였습니다. 1850mm X 175mm Z 330mm. X Z 175 mm 330 mm X Z X / Z 30 m/min 1850 mm 3.1m 2 1690 mm 은동급최대가공영역을지원합니다. 45 mm ( ) 70 kg
untitled
X-Ray FLUORESCENCE NON-DESSTRUCTIVE & NON-CONTAC COATING THICKNESS TESTER EX-3000 Ex WIN Ver.1.00 INSTRUCTION MANUAL ELEC FINE INSTRUMENTS CO., LTD 2-31-5 CHUO, NAKANO-KU, TOKYO, JAPAN PHONE : (03) 3365-4411
인켈(국문)pdf.pdf
M F - 2 5 0 Portable Digital Music Player FM PRESET STEREOMONO FM FM FM FM EQ PC Install Disc MP3/FM Program U S B P C Firmware Upgrade General Repeat Mode FM Band Sleep Time Power Off Time Resume Load
PRO1_01E [읽기 전용]
![PRO1_01E [읽기 전용]](/thumbs/44/23169348.jpg "PRO1_01E [읽기 전용]")
PCS 7 Software NET PC WinCC HMI DP Controller Siemens AG 1999 All rights reserved File: PRO1_01E1 2 S7-200 3 S7-200: 4 S7-200: CPU 5 S7-300 6 S7-300: 7 S7-300: CPU 8 S7-400 9 S7-400: 10 S7-400: CPU (1)
PRO1_16E [읽기 전용]
![PRO1_16E [읽기 전용]](/thumbs/88/115329210.jpg "PRO1_16E [읽기 전용]")
MPI PG 720 Siemens AG 1999 All rights reserved File: PRO1_16E1 Information and MPI 2 MPI 3 : 4 GD 5 : 6 : 7 GD 8 GD 9 GD 10 GD 11 : 12 : 13 : 14 SFC 60 SFC 61 15 NETPRO 16 SIMATIC 17 S7 18 1 MPI MPI S7-300
,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law),
1, 2, 3, 4, 5, 6 7 8 PSpice EWB,, ,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), ( ),,,, (43) 94 (44)
(Asynchronous Mode) ( 1, 5~8, 1~2) & (Parity) 1 ; * S erial Port (BIOS INT 14H) - 1 -
(Asynchronous Mode) - - - ( 1, 5~8, 1~2) & (Parity) 1 ; * S erial Port (BIOS INT 14H) - 1 - UART (Univ ers al As y nchronous Receiver / T rans mitter) 8250A 8250A { COM1(3F8H). - Line Control Register
untitled
CLEBO PM-10S / PM-10HT Megapixel Speed Dome Camera 2/39 3/39 4/39 5/39 6/39 7/39 8/39 ON ON 1 2 3 4 5 6 7 8 9/39 ON ON 1 2 3 4 10/39 ON ON 1 2 3 4 11/39 12/39 13/39 14/39 15/39 Meg gapixel Speed Dome Camera
4 CD Construct Special Model VI 2 nd Order Model VI 2 Note: Hands-on 1, 2 RC 1 RLC mass-spring-damper 2 2 ζ ω n (rad/sec) 2 ( ζ < 1), 1 (ζ = 1), ( ) 1
: LabVIEW Control Design, Simulation, & System Identification LabVIEW Control Design Toolkit, Simulation Module, System Identification Toolkit 2 (RLC Spring-Mass-Damper) Control Design toolkit LabVIEW
CPX-E-SYS_BES_C_ _ k1
CPX-E 8727 27-7 [875294] CPX-E-SYS-KO CODESYS, PI PROFIBUS PROFINET (). :, 2 Festo CPX-E-SYS-KO 27-7 ... 5.... 5.2... 5.3... 5.4... 5.5... 5 2... 6 2.... 6 2..... 6 2..2 CPX-E... 7 2..3 CPX-E... 9 2..4...
DRB1598A
DDJ-S1 http://www.prodjnet.com/support/ 본 파이오니어 제품을 구입해 주셔서 감사드립 본 취급설명서를 주의깊게 읽으시고, 갖고 계신 모델의 올바른 조작법을 익히십시오. 본 취급설 명서를 읽으신 후, 안전한 곳에 보관하셔서 나중에 참고하십시오. 일부 국가 또는 지역의 경우, 전원 플러그 및 콘센트의 형태가 설명의 그림에 보여지는
HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter X-axis Travel Y-axis Travel Z-axis Travel W-axis Travel Rotary Ta
HNK CNC HORIZONTAL BORING & MILLING MACHINE HBSeries The world wide leader in machine tools HNK MACHINE TOOL CO., LTD. HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter
untitled
CAN BUS RS232 Line Ethernet CAN H/W FIFO RS232 FIFO IP ARP CAN S/W FIFO TERMINAL Emulator COMMAND Interpreter ICMP TCP UDP PROTOCOL Converter TELNET DHCP C2E SW1 CAN RS232 RJ45 Power
Microsoft Word - FS_ZigBee_Manual_V1.3.docx
FirmSYS Zigbee etworks Kit User Manual FS-ZK500 Rev. 2008/05 Page 1 of 26 Version 1.3 목 차 1. 제품구성... 3 2. 개요... 4 3. 네트워크 설명... 5 4. 호스트/노드 설명... 6 네트워크 구성... 6 5. 모바일 태그 설명... 8 6. 프로토콜 설명... 9 프로토콜 목록...
Microsoft Word - SMB-63-2_KR_.doc
보충 설명서 압소덱스 AX9000TS/TH-U3 (PROFIBUS-DP 사양) SMB-63K-2 머리글 이번에 당사의 압소덱스를 선정해 주셔서 대단히 감사합니다. 압소덱스는 일반 산업용 조립 기계나 검사 기계 등의 간헐 작동 턴테이블 등을 유연하고 정밀도 높게 구동하기 위해 개발된 다이렉트 드라이브 인덱 스 유닛입니다. 본 설명서는 압소덱스 AX9000TS/TH(PROFIBUS-DP
LEO 인치 컴팩트 터닝 센터
6인치 컴팩트 터닝 센터 / / CNC 안정적인가공지원을위해 30 도경사베드구조와모든이송축에고강성롤러타입 LM 가이드를적용하였습니다. 1850mm X 175mm Z 330mm. X Z 175 mm 330 mm X Z X / Z 30 m/min 1850 mm 3.1m 2 1690 mm 은동급최대가공영역을지원합니다. 45 mm ( ) 70 kg 0 kg 최대가공길이
APOGEE Insight_KR_Base_3P11
Technical Specification Sheet Document No. 149-332P25 September, 2010 Insight 3.11 Base Workstation 그림 1. Insight Base 메인메뉴 Insight Base Insight Insight Base, Insight Base Insight Base Insight Windows
대경테크종합카탈로그
The Series Pendulum Impact 601 & 602 Analog Tester For Regular DTI-602B (Izod) DTI-601 (Charpy) DTI-602A (Izod) SPECIFICATIONS Model DTI-601 DTI-602 Type Charpy for plastics lzod for plastics Capacity
YD-3533.xls
Y D - 3 5 3 3 사 용 설 명 서 78, Daechun-Dong, Dalseo-gu, Daegu, KOREA TEL : +8-53-585-56(Main) FAX : +8-53-585-788 http://www.setech.co.kr e-mail : setech@setech.co.kr 페이지 . 특징 당사의 제품을 사용하여 주셨어 감사하며, 사용중 혹시라도
# KM
PARTS BOOK 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER 1-NEEDLE, NEEDLE FEED LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER MODEL KM-506 SERIES KM-506-7S 1-NEEDLE, STRAIGHT LOCK-STITCH
목차 006/ 008/ 009/ 011/ 012/ 013/ 014/ Part 1_ 컴퓨터가 제대로 작동하지 않을 때 문제00_ 윈도우7 복구(초기화) 방법 안내 문제01_ 컴퓨터의 전원 버튼을 눌러도 아무 반응이 없어요. 문제02_ 전원을 누르면 팬(쿨러)이 돌아가는
컴퓨터 유지관리 Q&A www.npoit.kr 이 www.fb.com/npoitcenter 책은 컴퓨터를 사용하며 자주 발생하는 문제에 대한 설명 npoit@npoit.kr 및 해결 방법을 담고 있습니다. 컴퓨터를 070-4241-8883 관리할 때 필요한 기초 상식들도 함께 있습니다. 목차 006/ 008/ 009/ 011/ 012/ 013/ 014/ Part
2 x10 목 차 1. 일반 정보 1. 점검 사항 2. 주의 및 관리 3. 방수 4. 배터리 충전하기 2. 순토 X10 사용 방법 1. 화면과 버튼 (1) 모드 표시 (2) 배터리 용량 표시 (3) 알람 심볼 (4) GPS 수신 표시 2. 메뉴 (1) 기본 메뉴 구조
SUUNTO X10 한글 사용 설명서 x 이 사용 설명서는 순토 X10 패키지에 들어있는 영문설명서 부분을 한 글화 한 것입니다. x 영문을 한글로 번역하는 과정에서 기술적인 전문성의 결여로 인해 발생 할 수 있는 오역의 가능성이 있음을 알려드리며, 사용 시 이 점을 감안하 여 주실 것을 당부 드립니다. x 보다 자세한 기술적인 설명에 대한 지원이 필요하신
CD-RW_Advanced.PDF
HP CD-Writer Program User Guide - - Ver. 2.0 HP CD-RW Adaptec Easy CD Creator Copier, Direct CD. HP CD-RW,. Easy CD Creator 3.5C, Direct CD 3.0., HP. HP CD-RW TEAM ( 02-3270-0803 ) < > 1. CD...3 CD...5
(3) () () LOSS LOSS LOSS LOSS (4) = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100
1.,.. 2. (1) Flow + ( ) (2) Flow Flow (LINE) ) (LINE) ModelC/T LOSS DAT A Check Sheet ((%) (T PM) (LOSS) - (3) () () LOSS LOSS LOSS LOSS (4) = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100
DCR-HC15
3-089-848-42(1) DCR-HC15 2004 Sony Corporation 2 1 2 3 4 5 6 7 8 1 5 6 2 7 3 4 8 3 c 4 5 6 c 7 3 2 v 1 Z 2 3 1 2 8 1 2 3 4 1 2 3 9 10 [a] [b] [c] [d] [a] [b] [c] [d] 11 (1) (2) (1) (2) 12 (1) (2) v (3)
MR-3000A-MAN.hwp
ITS Field Emulator for Traffic Local Controller [ MR-3000A ] User's Manual MORU Industrial Systems. www.moru.com - 1 - 1. 개요 MR-3000A는교통관제시스템에있어서현장용교통신호제어기의개발, 신호제어알고리즘의개발및검증, 교통신호제어기생산 LINE에서의자체검사수단등으로활용될수있도록개발된물리적모의시험장치이다.
PowerPoint 프레젠테이션
........................... ½ ¼ ½ ¾ ................................................ ...........................................................................
B _00_Ko_p1-p51.indd
KOS-V000 B64-797-00/00 (MV) KOS-V000 설명서를 보는 방법 이 설명서에서는 삽입된 그림을 통해 작동 방법을 설명합니다. 이 설명서에 나타낸 화면과 패널은 작동 방법을 자세히 설명하는 데 이용되는 예입니다. 따라서 실제 화면이나 패널과 다르거나 일부 디 스플레이 패턴이 다를 수도 있습니다. 찾기 모드 방송국 선택 설정. TUNER
2005 2004 2003 2002 2001 2000 Security Surveillance Ubiquitous Infra Internet Infra Telematics Security Surveillance Telematics Internet Infra Solutions Camera Site (NETWORK) Monitoring & Control
목차 1. 개요... 3 2. USB 드라이버 설치 (FTDI DRIVER)... 4 2-1. FTDI DRIVER 실행파일... 4 2-2. USB 드라이버 확인방법... 5 3. DEVICE-PROGRAMMER 설치... 7 3-1. DEVICE-PROGRAMMER
< Tool s Guide > 목차 1. 개요... 3 2. USB 드라이버 설치 (FTDI DRIVER)... 4 2-1. FTDI DRIVER 실행파일... 4 2-2. USB 드라이버 확인방법... 5 3. DEVICE-PROGRAMMER 설치... 7 3-1. DEVICE-PROGRAMMER 실행파일... 7 4. DEVICE-PROGRAMMER 사용하기...
ETL_project_best_practice1.ppt
ETL ETL Data,., Data Warehouse DataData Warehouse ETL tool/system: ETL, ETL Process Data Warehouse Platform Database, Access Method Data Source Data Operational Data Near Real-Time Data Modeling Refresh/Replication
목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4 시작하시기 전에
![목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4 시작하시기 전에](/thumbs/39/20101577.jpg "목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4 시작하시기 전에")
XDJAERO http://pioneerdj.com/support/ http://rekordbox.com/ 목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4
LCD Monitor
LCD MONITOR quick start guide 400FP-2 460FP-2 400FPn-2 460FPn-2 ii Floor standing type) Note LCD Display MagicInfo Software CD MagicInfo Manual CD (FPn-2.) (AAA X 2) (FPn-2.) BNC to RCA (46.) D-Sub DVI
VZ94-한글매뉴얼
KOREAN / KOREAN VZ9-4 #1 #2 #3 IR #4 #5 #6 #7 ( ) #8 #9 #10 #11 IR ( ) #12 #13 IR ( ) #14 ( ) #15 #16 #17 (#6) #18 HDMI #19 RGB #20 HDMI-1 #21 HDMI-2 #22 #23 #24 USB (WLAN ) #25 USB ( ) #26 USB ( ) #27
歯기구학
1 1.1,,.,. (solid mechanics)., (kinematics), (statics), (kinetics). ( d y n a m i c s ).,,. ( m e c h a n i s m ). ( l i n k a g e ) ( 1.1 ), (pin joint) (revolute joint) (prismatic joint) ( 1.2 ) (open
Solaris Express Developer Edition
Solaris Express Developer Edition : 2008 1 Solaris TM Express Developer Edition Solaris OS. Sun / Solaris, Java, Web 2.0,,. Developer Solaris Express Developer Edition System Requirements. 768MB. SPARC
untitled
CAN BUS RS232 Line CAN H/W FIFO RS232 FIFO CAN S/W FIFO TERMINAL Emulator COMMAND Interpreter PROTOCOL Converter CAN2RS232 Converter Block Diagram > +- syntax
EP-B-P211.eps
PFA/PFW Series PFA Series PFW Series PF00 Series Alphabet Index 8 A COM B COM DCV GND F.G. R.S. HOLD COM BANK BANK COUNT PRESET FUNC. AC00~0VCOM OUTOUTOUTOUTOUTS.STOP RD SD SG RS-C PFA/PFW Series, N M/C
#KM-350AB..
PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PME-051121 MODEL FOR THIN MATERIAL KM-350A-7S 1-NEEDLE, NEEDLE
BC6DX Korean.ai
제품설명서 BC6DX * 제품의성능개선을위하여예고없이사양이변경될수있습니다. * 무단복제금지 제품의특징 - 운영프로그램 - 이중입력전원회로 - 방전중개별셀전압평균화 - 최대한의안전장치들 - 사이클충전 / 방전 (Cyclic charging/discharging) - USB 를이용한 PC 통신 - 2 - 외부장치들 -, 버튼 - DEC, INC 버튼 - START/
#KM
PARTS BOOK KM-2300 Code Lubrication type Code Application F Full-Dry type A Light materials S Semi-Dry type G General materials M Micro-Lubrication type B Heavy materials Only use B (Heavy materials) code
핸디로더(PGM-500) 사용자 메뉴얼
PLC PGM-500 1. 1.1 PGM-500... 1.2... 1.3... 2. 2.1... 2.2... 3. 4. 5. 6. 3.1... 3.2... 4.1 (EDIT)... 4.2 (MONITOR)... 4.3 (SYSTEM)... 5.1... 5.2... 5.3 Timer/Counter/SR... 5.4... 5.5... 5.6... 6.1...
. PC DP-1VR P15 1ch 1 Input Tool 4ch RS-232C RS-232C. Input Tool P14 MUX-10F P16 MeasureReport P21 GO/NG 2 MeasurLink Real-Time P19 MeasurLink STATMea
12 Input Tool ( ) 14 DP-1VR 15-10F 16 3 17 EC 17 MeasurLink 18 MeasureReport 21 SPC 22 11 . PC DP-1VR P15 1ch 1 Input Tool 4ch RS-232C RS-232C. Input Tool P14 MUX-10F P16 MeasureReport P21 GO/NG 2 MeasurLink
HM 1000/1250/1250W HM 1000 HM 1250 HM 1250W ver. KO SU
1000 1250 1250W ver. KO 160502 SU / / NC 1000/1250 W, BOX. Contents 02 04 06 07 / 10 12 15 / NC 18,,. W 1000/1250 W.. 02 / 03 / / NC 고강성의베드로높은정밀도를유지시켜줍니다. 1000 / 1250 / 1250W W. 1000 / 1250 Y X Z 1250W
DVF 5000 Ø500mm 5
Ø500mm 5 / / NC 5 5,. 5. Contents 02 04 07 08 / 10 12 15 / NC 18 & 5 12000/18000 r/min - 12000 r/min() - 18000 r/min( type) Ø500mm 2 tilting table ( : Ø630mm) - 400kg Easy access to machine (AWC) & ( :
B-63945KO/ 보수정보화면 보수정보화면의표시방법 보수정보화면의조작 보수정보화면에서의반각 KANA 입력 보수정보화면에서발생하는 warning
안전한보수를위하여...s-1 경고, 주의, 주에대하여...s-2 보수작업에관한경고및주의...s-3 교환작업에관한경고및주의...s-5 Patameter 에관한경고및주의...s-6 일상보수에관한경고및주의...s-7 개요...p-1 1 화면의표시와조작... 1 1.1 기능 Key 와 Soft Key...2 1.1.1 Soft Key 의구성... 2 1.1.2 일반적인화면의표시순서...
<4D6963726F736F667420576F7264202D20C1A6C7B0BBE7BEE7BCAD2D5143203532384B205FC8A8C6E4C0CCC1F65F2E646F63>
Universal Testing Machines Excellent manufacturing technology Made in Taiwan & Japan (NTS_Technical) from cometech world markets QC-528K 대 하 교 역 상 사 제 품 사 양 서 Force gauge of Motorized Stand Testing Machine
0806 블랙박스 메뉴얼 L5 원고작업_수정
CLON L5 USER'S MANUAL Full HD Driving Image Recorder EFL3.0mm F2.0 DRIVING IMAGE RECORDER Digital L5 Recorder 본 제품을 사용하기 전에... www.eyeclon.com 제품을 구입해 주셔서 감사합니다. (아이클론)은 엠씨넥스의 상표입니다. 엠씨넥스 설명서의 모든 내용은 저작권법에
hwp
100% Concentration rate (%) 95% 90% 85% 80% 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 Time (min) Control box of RS485 Driving part Control trigger Control box of driving car Diaphragm Lens of camera Illumination
B64-4102-00_00_KO.indb
DDX80BT DDX80BTM B6-0-00/00 (MW) DDX80BT/DDX80BTM DDX80BT/DDX80BTM 5 6 DDX80BT/DDX80BTM % % % % 7 CD () : Folder : Audio fi 8 DDX80BT/DDX80BTM 9 5 5 6 ALL 8 9 6:9 LB E D C B A C B D E 0 DDX80BT/DDX80BTM
COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.
BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged
歯DCS.PDF
DCS 1 DCS - DCS Hardware Software System Software & Application 1) - DCS System All-Mighty, Module, ( 5 Mbps ) Data Hardware : System Console : MMI(Man-Machine Interface), DCS Controller :, (Transmitter
XJ-A142_XJ-A147_XJ-A242_XJ-A247_XJ-A252_XJ-A257_XJ-M141_XJ-M146_XJ-M151_XJ-M156_XJ-M241_XJ-M246_XJ-M251_XJ-M256
데이터 프로젝터 XJ-A 시리즈 XJ-A142/XJ-A147* XJ-A242/XJ-A247* XJ-A252/XJ-A257* XJ-M 시리즈 XJ-M141/XJ-M146* XJ-M151/XJ-M156* XJ-M241/XJ-M246* XJ-M251/XJ-M256* *USB 모델 KO 사용설명서 본 설명서에서 XJ-A 시리즈 및 XJ-M 시리즈 는 위에 나열된 특정
*DNX_DDX7_M_KOR.indb
DNX70 DDX70 DDX70M B6-09-00/00 (MW) DNX70/DDX70/DDX70M DNX70/DDX70/DDX70M 5 6 DNX70/DDX70/DDX70M % % % % 7 CD () : Folder : Audio fi 8 DNX70/DDX70/DDX70M 9 5 5 6 ALL 8 9 6:9 LB E D C B A C B D E 0 DNX70/DDX70/DDX70M