ISO/FDIS TC 34 ISO/FDIS Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (Revision of ISO 10897:1996) 테이퍼비 1:10 인공구

Transcription

1 국제표준진행현황 ISO 에서는매월국제표준현황표를제공합니다. 이번제 188 호에서는 2016 년 5 월현재 ISO 기술위 원회에서진행중인 FDIS( 최종국제표준안 ) 및 SP( 발간표준 ) 현황표를게재합니다. 원문은 ( 를참고하여주시기바랍 니다. FDIS (Final Draft International Stnadard: 최종국제표준안 ) 투표마감일 TC 6 ISO/FDIS TC 20 ISO/FDIS TC 24 ISO/IEC TC 28 ISO/FDIS 3924 TC 29 ISO/FDIS 240 ISO/FDIS 866 Paper, board and pulps 종이, 판지및펄프 Paper and board - Determination of CIE whiteness, D65/10 degrees (outdoor daylight) (Revision of ISO 11475:2004) 종이및판지 - CIE 백색도측정, 옥외광원 D65/10 (ISO 11475:2004 개정 ) Aircraft and space vehicles 항공기와우주선 Space systems - Estimation of orbit lifetime (Revision of ISO 27852:2011) 우주시스템 - 궤도수명예측 (ISO 27852:2011 개정 ) Particle characterization including sieving 체가름을포함한입자특성분석 Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth (Revision of ISO :2000, ISO :2000/Cor 1:2004) 시험용체 - 기술요구사항및시험 - 제 1 부 : 금속망체 (ISO :2000, ISO :2000/Cor 1:2004 개정 ) Petroleum products and related products of synthetic or biological origin 석유제품및윤활유 Petroleum products - Determination of boiling range distribution - Gas chromatography method (Revision of ISO 3924:2010) 석유제품 - 비점범위시험방법 - 가스크로마토그래피법 (ISO 3924:2010 개정 ) Small tools 소형공구 Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels (Revision of ISO 240:1994) 밀링커터 - 커터아버및커터맨드렐호환치수 (ISO 240:1994 개정 ) Centre drills for centre holes without protecting chamfers - Type A (Revision of ISO 866:1975) 센터드릴 - A형 (ISO 866:1975 개정 )

2 ISO/FDIS TC 34 ISO/FDIS Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (Revision of ISO 10897:1996) 테이퍼비 1:10 인공구홀더용콜릿 - 콜릿, 홀더, 너트 (ISO 10897:1996 개정 ) Food products 식품 Royal jelly - Specifications 로얄젤리 - 사양 ISO/IEC TC 35 ISO/FDIS 1514 ISO/FDIS 3248 ISO/IEC TC 43 ISO 389-7:2005/FDAmd 1 TC 44 ISO/FDIS 3677 Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (Revision of ISO :2003) 우유및유제품 - 염기성포스파타아제활성측정 - 제 2 부 : 치즈에대한형광검출기방법 (ISO :2003 개정 ) Paints and varnishes 페인트와바니시 Paints and varnishes - Standard panels for testing (Revision of ISO 1514:2004) 페인트와바니시 - 시험용표준패널 (ISO 1514:2004 개정 ) Paints and varnishes - Determination of the effect of heat (Revision of ISO 3248:1998) 페인트와바니시 - 가열시험방법 (ISO 3248:1998 개정 ) Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (Revision of ISO :2003, ISO :2003/Cor 1:2005) 페인트와바니시 - 실형부식저항측정 - 제 2 부 : 알루미늄소지 (ISO :2003, ISO :2003/Cor 1:2005 개정 ) Acoustics 음향 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffusefield listening conditions - Amendment 1: Reference threshold of hearing at 20 Hz and Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions 음향 - 청력측정기의교정을위한기준영점 - 제 7 부 : 자유음장및확산음장청취조건에서의기준청각역치 - 수정안 1: 자유음장청취조건 20Hz~18,000 및확산음장청취조건 20Hz 에서의기준청각역치 Welding and allied processes 용접및관련공정 Filler metal for soft soldering, brazing and braze welding - Designation (Revision of ISO 3677:1992) 솔더링과브레이징및브레이즈용접을위한용가재 - 호칭 (ISO 3677:1992 개정 )

3 ISO/FDIS ISO/IEC TC 45 Brazing - Filler metals (Revision of ISO 17672:2010) 브레이징 - 용가재 (ISO 17672:2010 개정 ) Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (Revision of ISO :2001) 수중용접용접사의자격인정시험 - 제 1 부 : 고압습식용접 (ISO :2001 개정 ) Rubber and rubber products 고무및고무제품 ISO/IEC ISO/IEC ISO/FDIS TC 61 ISO/FDIS Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobuteneisoprene, isoprene and styrene-butadiene rubbers (Revision of ISO :2000) 고무및고무제품 - 열중합분석법을이용한가황물과미가황혼합물의조성측정 - 제 1 부 : 부타디엔고무, 에틸렌 - 프로필렌공중합체와삼원공중합체, 이소부텐 - 이소프렌고무, 이소프렌고무및스틸렌 - 부타디엔고무 (ISO :2000 개정 ) Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halobutyl rubbers (Revision of ISO :2000, ISO :2000/Amd 1:2012) 고무및고무제품 - 열중합분석법을이용한가황물과미가황혼합물의조성측정 - 제 2 부 : 아크릴로니트릴부타디엔고무및할로부틸고무 (ISO :2000, ISO :2000/Amd 1:2012 개정 ) Rubber compounding ingredients - Silica - Oil absorption of precipitated silica 고무배합성분 - 실리카 - 침강실리카의흡유 Plastics 플라스틱 Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production (Revision of ISO 14853:2005, ISO 14853:2005/Cor 1:2009) 플라스틱 - 수계조건에서플라스틱물질의혐기성최종생분해도시험방법 - 바이오가스발생량측정법 (ISO 14853:2005, ISO 14853:2005/Cor 1:2009 개정 ) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 석유및천연가스산업, 재료, 장비및해양구조물 ISO/FDIS ISO/FDIS Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (Revision of ISO 14224:2006) 석유, 석유화학및천연가스산업 - 설비신뢰도및유지관리데이터의수집및교환 (ISO 14224:2006 개정 ) Standard cost coding system for oil and gas production and processing facilities 석유및천연가스생산시설및처리시설의표준비용코딩시스템

4 TC 84 ISO/FDIS 7864 ISO/IEC TC 94 ISO/IEC TC 106 ISO/FDIS TC 110 ISO/IEC TC 121 ISO/FDIS 5361 ISO/FDIS 5364 TC 131 Devices for administration of medicinal products and catheters 의약품및카테터투여장치 Sterile hypodermic needles for single use - Requirements and test methods (Revision of ISO 7864:1993) 일회용멸균피하주사바늘 - 요구사항및시험방법 (ISO 7864:1993 개정 ) Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment 의료용주사침기반주사시스템 - 요구사항및시험방법 - 제 7 부 : 시각장애인의접근성 Personal safety -- Protective clothing and equipment 개인안전 - 보호복과장비 PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 6: Footwear 소방관의인체보호장구 - 건물내화재발생시고온및화염에노출된소방관이사용하는인체보호장구에관한테스트방법및요구사항 - 제 6 부 : 신발 Dentistry 치과용의료기 Dentistry - Coiled springs for use in orthodontics 치과용의료기 - 치과교정용코일스프링 Industrial trucks 산업용트럭 Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks (Revision of ISO :2009) 산업용트럭 - 안전성검증 - 제 7 부 : 양방향및다방향트럭 (ISO :2009 개정 ) Anaesthetic and respiratory equipment 마취및호흡장비 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (Revision of ISO 5361:2012) 마취및호흡기기 - 기관튜브및커넥터 (ISO 5361:2012 개정 ) Anaesthetic and respiratory equipment - Oropharyngeal airways (Revision of ISO 5364:2008) 마취및호흡기기 - 비인두기도기 (ISO 5364:2008 개정 ) Fluid power systems 유압시스템

5 ISO/FDIS ISO/FDIS TC 145 ISO/IEC TC 146 ISO/IEC TC 150 ISO/FDIS 7198 ISO/IEC ISO/IEC TC 159 ISO/FDIS 6385 TC 163 Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions (Revision of ISO 16656:2004) 유압유체동력 - 편로드, 안지름 32~100mm 10MPa(100 bar) 용짧은행정실린더 - 장착치수 (ISO 16656:2004 개정 ) Hydraulic spin-on filters with finite lives - Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope 일정수명을갖는유압스핀온필터 - 필터하우징의정격피로수명및정격정적파열압력검증방법 Graphical symbols 그림기호 Public information guidance systems - Part 2: Design principles and requirements for location signs and direction signs 공공정보안내시스템 - 제 2 부 : 위치신호및방향신호설계원리및요구사항 Air quality 공기의질 Air quality - Bulk materials - Part 3: Quantitative determination of asbestos by X-ray diffraction method 공기의질 - 벌크자재 - 제 3 부 : X- 선회절분석법에의한석면정량측정 Implants for surgery 외과용이식재 Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches (Revision of ISO 7198:1998) 심장이식재및체외막시스템 - 혈관보철물 - 관형태의혈관이식편및혈관패치 (ISO 7198:1998 개정 ) Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement (Revision of ISO :2000) 외과용이식재 - 전치환형인공고관절의마모 - 제 2 부 : 측정방법 (ISO :2000 개정 ) Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement (Revision of ISO :2009) 외과용이식재 - 전치환형인공무릎관절의마모 - 제 2 부 : 측정방법 (ISO :2009 개정 ) Ergonomics 인간공학 Ergonomics principles in the design of work systems (Revision of ISO 6385:2004) 작업시스템설계를위한인간공학적원칙 (ISO 6385:2004 개정 ) Thermal performance and energy use in the built environment 건물에서의열성능및에너지이용

6 ISO/FDIS TC 164 ISO/IEC TC 172 ISO/IEC ISO/IEC TC 215 ISO/IEEE FDIS TC 221 ISO/IEC IULTCS ISO/FDIS JTC 1 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (Revision of ISO 12572:2001) 건축재료의흡방습성시헙방법 - 수증기투과도의측정 - 컵시험방법 (ISO 12572:2001 개정 ) Mechanical testing of metals 금속의역학시험 Metallic materials- Rockwell hardness test - Part 1: Test method (Revision of ISO :2015) 금속재료 - 로크웰경도시험 - 제 1 부 : 시험방법 (ISO :2015 개정 ) Optics and photonics 광학및광학기기 Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing (Revision of ISO :2012) 광학및광학기기 - 환경시험방법 - 제 1 부 : 정의, 시험범위 (ISO :2012 개정 ) Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat (Revision of ISO :2013) 광학및광학기기 - 환경시험방법 - 제 23 부 : 저압및저온, 실온, 건열, 습열복합시험 (ISO :2013 개정 ) Health informatics 보건의료정보 Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (Revision of ISO/IEEE :2014) 보건의료정보 - 개인용건강기기통신 - 제 부 : 기기특성화 - 혈당측정기 (ISO/IEEE :2014 개정 ) Geosynthetics 지반용섬유 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (Revision of ISO :2005) 지반용섬유 - 규정압력에서의두께측정 - 제 1 부 : 단일층 (ISO :2005 개정 ) International Union of Leather Technologists and Chemists Societies 가죽장인및약사단체국제조합 Leather - Measurement of leather surface - Using electronic techniques 피혁 - 피혁표면측정 - 전자기법사용 Information technology 정보기술

7 ISO/IEC/IEEE FDIS ISO/IEC FDIS ISO/IEC :2015/FDAmd 5 ISO/IEC :2015/FDAmd 1 ISO/IEC :2012/FDAmd 3 ISO/IEC FDIS ISO/IEC FDIS Software and systems engineering - Software testing - Part 5: Keyworddriven testing 소프트웨어및시스템엔지니어링 - 소프트웨어시험 - 제 5 부 : 키워드주도시험 Test methods for machine readable travel documents(mrtd) and associated readers - Part 2: Test methods for the contactless interface 기계판독여행문서 (MRTD) 및관련판독기시험방법 - 제 2 부 : 비접촉식인터페이스시험방법 Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems - Amendment 5: Carriage of MPEGH 3D audio over MPEG2 systems 정보기술 - 동영상및오디오의범용부호화 - 제 1 부 : 시스템 - 수정안 5: MPEG-2 시스템을이용한 MPEG-H 3D 오디오캐리지 Information technology - MPEG systems technologies - Part 11: Energy-efficient media consumption (green metadata) - Amendment 1: Carriage of Green Metadata in an HEVC SEI Message 정보기술 - MPEG 시스템기술 - 제 11 부 : 에너지효율적미디어소비 ( 그린메타데이터 ) - 수정안 1: HEVC SEI 메시지를이용한그린메타데이터전송 Information technology - MPEG audio technologies - Part 3: Unified speech and audio coding - Amendment 3: Support of MPEG-D DRC, Audio Pre-Roll and Immediate Play-Out Frame 정보기술 - MPEG 오디오기술 - 제 3 부 : 음성 / 오디오통합부호화 - 수정안 3: MPEG-D DRC, 오디오프리롤및순간플레이아웃프레임지원 Information technology - Media context and control - Part 1: Architecture (Revision of ISO/IEC :2014) 정보기술 - 미디어콘텍스트와제어 - 제 1 부 : 아키텍처 (ISO/IEC :2014 개정 ) Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET) - Part 1: Framework and reference model (Revision of ISO/IEC :2013) 정보기술 - 학습, 교육및훈련 (LET) 과관련된프라이버시요구사항분석 - 제 1 부 : 프레임워크및참조모델 (ISO/IEC :2013 개정 )

8 SP(Standard Published) 발간표준 TC 5 ISO 1613 TC 6 ISO :2016 TC 8 ISO 15364:2016 ISO 7236:2014 TC 17 ISO 4955:2016 ISO 17745:2016 ISO 17746:2016 ISO TC 20 ISO 17520:2016 TC 21 ISO :2016 TC 22 Ferrous metal pipes and metallic fittings 금속관및관이음 Ductile iron pipes and fittings - Seal coats for cement mortar linings 덕타일주철파이프및관이음쇠 - 시멘트모르타르라이닝실코팅 Paper, board and pulps 종이, 판지및펄프 Paper and board - Measurement of specular gloss - Part 3: 20 degree gloss with a converging beam, TAPPI method 종이및판지 - 거울면광택도측정 - 제 3 부 : 수렴빔을사용한 20 광택도, TAPPI 법 Ships and marine technology 선박및해양기술 Ships and marine technology - Pressure/vacuum valves for cargo tanks 선박및해양기술 - 화물탱크용압력 / 진공밸브 Ships and marine technology - Inland navigation vessels - Mounting attachments for demountable signal masts for push-tows 선박및해양기술 - 내륙운항선박 - 푸쉬토우용분리가능형신호마스트설치 Steel 강 Heat-resistant steels 내열강 Steel wire ring net panels - Definitions and specifications 강제와이어링을이용한네트패널 - 정의및사양 Steel wire rope net panels and rolls - Definitions and specifications 강제와이어로프를이용한네트패널과롤 - 정의및사양 Steel wire and wire products - Part 2: Tolerances on wire dimensions 강제와이어및와이어제품 - 제 2 부 : 강제와이어의치수허용오차 Aircraft and space vehicles 항공기와우주선 Space environment (natural and artificial) - Cosmic ray and solar energetic particle penetration inward the magnetosphere - Method of determination of the effective vertical cut-off rigidity 우주환경 ( 자연및인공 ) - 우주방사선과태양에너지입자의자기권침투 - 유효수직차단강성계산법 Equipment for fire protection and fire fighting 소방시설 Fire detection and fire alarm systems - Part 24: Fire alarm loudspeakers 화재감지및경보설비 - 제 24 부 : 화재경보확성기 Road vehicles 도로차량 8

9 ISO :2016 ISO ISO :2016 ISO ISO :2016 ISO ISO 14513:2016 ISO/PAS 19295:2016 ISO :2014/Amd ISO TC 24 ISO TC 25 ISO/TR 945-3:2016 TC 31 Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits:specification and use 도로차량 - 배출가스관련진단을위한외부장비와차량사이의통신 - 제 3 부 : 진단커넥터및관련전기회로, 제원및용도 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services 도로차량 - 차량내부네트워크진단통신 (DoCAN) - 제 2 부 : 전송프로토콜과네트워크계층서비스 Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 4: Requirements for emissions-related systems 도로차량 - 차량내부네트워크진단통신 (DoCAN) - 제 4 부 : 배출관련시스템요구사항 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements 도로차량 - 회로차단기 - 제 1 부 : 정의및일반시험요구사항 Road vehicles - Circuit breakers - Part 5: Circuit breakers with bolt with rated voltage of 450 V 도로차량 - 회로차단기 - 제 5 부 : 정격전압 450V 인볼트를장착한회로차단기 Road vehicles - Test method for the quantification of on-centre handling - Part 2: Transition test 도로차량 - 온 - 센터핸들링의정량화시험방법 - 제 2 부 : 전환시험 Road vehicles - Pedestrian protection - Head impact test method 도로차량 - 보행자보호 - 머리충격시험방법 Electrically propelled road vehicles - Specification of voltage sub-classes for voltage class B 전기자동차 - 전압등급 B 의세부등급화를위한규격 Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components - Part 3: Pressure regulator - Amendment 1:. 도로차량 - 압축수소가스 (CGH2) 및수소 / 천연가스혼합연료시스템부품 - 제 3 부 : 압력조절기 - 수정안 1 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods 도로차량 - 압축천연가스 (CNG) 연료장치의구성부품 - 제 2 부 : 성능및일반시험방법 Particle characterization including sieving 체가름을포함한입자특성분석 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry 수은침투를이용한기공률측정및기체흡착에의한고형물의기공크기분포및다공성평가 - 제 1 부 : 수은침투를이용한기공률측정 Cast irons and pig irons 주철및선철 Microstructure of cast irons - Part 3: Matrix structures 주철의미세조직 - 제 3 부 : 매트릭스조직 Tyres, rims and valves 타이어, 림및밸브 9

10 ISO 1057 TC 33 ISO 18886:2016 TC 34 ISO :2016 ISO 66 ISO 6886:2016 ISO/TS :2016 TC 35 ISO 19399:2016 TC 36 ISO 21727:2016 TC 38 ISO TC 45 ISO TC 46 Tyres for mobile cranes and similar specialized machines 이동크레인및이와유사한특수기계류타이어 Refractories 내화물 Refractory test-piece preparation - Gunning refractory panels by wet gunning techniques 내화물시편준비 - 습식취부기술을이용한내화패널 Food products 식품 Milk and milk products - Determination of nitrogen content - Part 4: Determination of protein and non-protein nitrogen content and true protein content calculation (Reference method) 우유및유제품 - 질소함량측정 - 제 4 부 : 단백및비단백질소함량측정및순단백질함량계산 ( 기준법 ) Animal and vegetable fats and oils - Determination of moisture and volatile matter content 동물성및식물성유지 - 수분및휘발성물질의함량측정 Animal and vegetable fats and oils - Determination of oxidative stability (accelerated oxidation test) 동물성및식물성유지 - 산화안전도측정 ( 가속산화시험 ) Prerequisite programmes on food safety - Part 6: Feed and animal food production 식품안전에관한선행요건프로그램 - 제 6 부 : 동물사료생산 Paints and varnishes 페인트와바니시 Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) 페인트와바니시 - 도막두께측정을위한쐐기절단법 ( 스크라이브및드릴법 ) Cinematography 영화기술 Cinematography - Method of measurement of perceived loudness of short duration motion-picture audio material 영화기술 - 단편영화오디오자료의주관적으로느끼는소리의세기측정방법 Textiles 섬유 Textiles - Method for the detection and determination of alkylphenol ethoxylates (APEO) - Part 1: Method using HPLC-MS 섬유 - 알킬페놀에톡실레이트 (APEO) 검출및측정방법 - 제 1 부 : HPLC-MS 를이용한측정방법 Rubber and rubber products 고무및고무제품 Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential-pressure methods 가황또는열가소성고무 - 기체투과성측정 - 제 1 부 : 차압방법 Information and documentation 문헌정보 10

11 ISO TC 58 ISO 14456:2015 ISO 16148:2016 TC 59 ISO TC 61 ISO :2011/Amd ISO :1998/Amd ISO TC 85 ISO TC 94 ISO :2015 ISO :2015 ISO/TS 16973:2016 Information and documentation - Records management - Part 1: Concepts and principles 문헌정보 - 기록관리 - 제 1 부 : 개념과원칙 Gas cylinders 가스실린더 Gas cylinders - Gas properties and associated classification (FTSC) codes 가스실린더 - 가스성분및관련분류 (FTSC) 코드 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing 가스실린더 - 재충전용이음매없는강제가스실린더및강관 - 정기검사및시험용음향방출시험 (AT) 및후속초음파탐상시험 (UT) Buildings and civil engineering works 건축및토목공사 Building information models - Information delivery manual - Part 1: Methodology and format 빌딩정보모델 - 정보전달매뉴얼 - 제 1 부 : 방법론과양식 Plastics 플라스틱 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics - Amendment 1: New symbol ST for syndiotactic 플라스틱 - 기호및약어 - 제 1 부 : 기본중합체및그특성 - 수정안 1 신디오택틱의새기호 ST Plastics - Symbols and abbreviated terms - Part 4: Flame retardants - Amendment 1: Code numbers 플라스틱 - 기호및약어 - 제 4 부 : 난연재 - 수정안 1: 코드번호 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance 플라스틱 - 실험실광원에의한폭로시험방법 - 제 1 부 : 일반지침 Nuclear energy, nuclear technologies, and radiological protection 원자력에너지, 핵기술및방사선보호 Measurement of radioactivity in the environment - Air: radon Part 11: Test method for soil gas with sampling at depth 환경방사능측정 - 공기 : 라돈 제 11 부 : 깊이별로채취한토양가스시험방법 Personal safety -- Protective clothing and equipment 개인안전 - 보호복과장비 Respiratory protective devices - Methods of test and test equipment - Part 7: Practical performance test methods 호흡용보호구 - 시험방법및시험장비 - 제 7 부 : 성능시험방법 Respiratory protective devices - Methods of test and test equipment - Part 14: Measurement of sound level 호흡용보호구 - 시험방법및시험장비 - 제 14 부 : 사운드레벨측정 Respiratory protective devices - Classification for respiratory protective device (RPD), excluding RPD for underwater application 호흡용보호구 - 수중호흡장치를제외한호흡용보호구 (RPD) 의분류 11

12 TC 96 ISO 4305:2014/ Amd TC 102 ISO/TR 1823 TC 106 ISO 2157:2016 ISO ISO 18556:2016 TC 108 ISO TC 110 ISO :2016 TC 114 ISO 1413:2016 TC 118 ISO 1217:2009/ Amd TC 127 Cranes 크레인 Mobile cranes - Determination of stability - Amendment 1 이동식크레인 - 안정성측정 - 수정안 1 Iron ore and direct reduced iron 철광석및직접환원철 Iron ores - Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision 철광석 - 파장분산형 X 선형광분석법 - 정밀도측정 Dentistry 치과용의료기 Dentistry - Nominal diameters and designation code numbers for rotary instruments 치과용의료기 - 회전기구의공칭직경과코드번호명칭 Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters 치과용의료기 - 기공용절삭기 - 제 1 부 : 기공용강절삭기 Dentistry - Intraoral spatulas 치과용의료기 - 구강내압설자 Mechanical vibration, shock and condition monitoring 기계적진동, 충격및상태감시 Condition monitoring and diagnostics of machines - Ultrasound - Part 2: Procedures and validation 기계의상태감시및진단 - 초음파 - 제 2 부 : 절차및확인 Industrial trucks 산업용트럭 Rough-terrain trucks - User requirements - Part 4: Additional requirements for variablereach trucks handling freely suspended loads 험지용트럭 - 사용자요구사항 - 제 4 부 : 자유회전부유하중을취급하는가변리치트럭에대한추가요구사항 Horology 시계제작법 Horology - Shock-resistant wrist watches 시계제작법 - 내충격손목시계 Compressors and pneumatic tools, machines and equipment 컴프레서및공압공구, 기계, 설비 Displacement compressors - Acceptance tests - Amendment 1: Calculation of isentropic efficiency and relationship with specific energy 용적형압축기 - 승인시험 - 수정안 1: 등엔트로피효율계산및비에너지와의관계 Earth-moving machinery 토공기계 12

13 ISO :2008/Amd ISO 881 TC 130 ISO 5776:2016 ISO 18620:2016 TC 131 ISO :2012/Amd TC 133 ISO 18163:2016 ISO 1883 TC 134 ISO ISO ISO 15604:2016 ISO 18644:2016 ISO 25475:2016 Earth-moving machinery - Laboratory tests and performance requirements for protective structures of excavators - Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t - Amendment 1 토공기계 - 굴삭기보호구조에대한실험실시험및성능요구사항 - 제 2 부 : 6t 이상의굴삭기에대한전복보호구조 (ROPS) - 수정안 1 Earth-moving machinery - Backhoe loaders - Terminology and commercial specifications 토공기계 - 백호로더 - 용어및상용명세 Graphic technology 그래픽기술 Graphic technology - Symbols for text proof correction 그래픽기술 - 문장교정용부호 Graphic technology - Prepress data exchange - Tone adjustment curves exchange 그래픽기술 - 프리프레스데이터교환 - 톤조정곡선교환 Fluid power systems 유압시스템 Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications - Amendment 1 유공압시스템및부품 - 그래픽기호및회로도 - 제 1 부 : 종래의이용및데이터처리용도의그래픽기호 - 수정안 1 Clothing sizing systems - size designation, size measurement methods and digital fittings 의류치수체계 - 치수호칭, 치수측정방법및디지털피팅 Clothing - Digital fittings - Vocabulary and terminology used for the virtual garment 의류 - 디지털피팅 - 가상의복에사용되는용어 Clothing - Digital fittings - Attributes of virtual garments 의류 - 디지털피팅 - 가상의복의속성 Fertilizers and soil conditioners 비료및토양개량제 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling 석회질비료 - 시료채취및시료조제 - 제 1 부 : 시료채취 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation 석회질비료 - 시료채취및시료조제 - 제 2 부 : 시료조제 Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen 비료 - 질소, 암모니아, 요소및시안아미드질소의형태로질소를함유한동일시료에서서로다른형태의질소측정 Fertilizers and soil conditioners - Controlled-release fertilizer - General requirements 비료및토양개량제 - 방출조절형비료 - 일반요구사항 Fertilizers - Determination of ammoniacal nitrogen 비료 - 암모니아성질소함량측정 13

14 ISO 25705:2016 TC 147 ISO 17943:2016 ISO 18635:2016 ISO :2014 ISO :2016 TC 153 ISO 712 TC 159 ISO 24505:2016 TC 165 ISO 12578:2016 ISO 18324:2016 ISO 19049:2016 TC 190 Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B) 비료 - 고성능액체크로마토그래피 (HPLC) 를이용한요소응축측정 - 이소부틸이요소와크로토닐이요소 (A 방법 ) 및메틸렌우레아올리고머 (B 방법 ) Water quality 수질 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatographymass spectrometry (GC-MS) 수질 - 수중휘발성유기화합물측정 - 헤드스페이스고체상미세추출법 (HS-SPME) 에뒤이은기체크로마토그래피 / 질량분석법 (GC-MS) 을이용한방법 Water quality - Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter - Method using gas chromatographymass spectrometry (GC-MS) and electron capture negative ionization (ECNI) 수질 - 퇴적물, 하수슬러지, 부유 ( 입자 ) 물질내짧은사슬다염화알케인계열 (SCCP) 측정 - 가스크로마토그래피 - 질량분석 (GC MS) 및전자포획화학음이온화 (ECNI) 이용방법 Soil quality - Sampling - Part 6: Guidance on sampling of rivers and streams 토양의질 - 시료채취 - 제 6 부 : 하천수의시료채취에대한지침 Soil quality - Sampling - Part 24: Guidance on the auditing of water quality sampling 토양의질 - 시료채취 - 제 24 부 : 수질시료채취심사에대한지침 Valves 밸브 Steel ball valves for general-purpose industrial applications 일반산업용강제볼밸브 Ergonomics 인간공학 Ergonomics - Accessible design - Method for creating colour combinations taking account of age-related changes in human colour vision 인간공학 - 접근성을고려한설계 - 노화에따른사람의색각변화를고려한색상혼합방법 Timber structures 목구조 Timber structures - Glued laminated timber - Component performance requirements 목구조 - 집성재 - 부품성능요건 Timber structures - Test methods - Floor vibration performance 목구조 - 시험방법 - 바닥판진동성능 Timber structures - Test method - Static load tests for horizontal diaphragms including floors and roofs 목구조 - 시험방법 - 바닥및지붕을포함한수평격막용정하중시험 Soil quality 토양의질 14

15 ISO 17183:2016 ISO 18187:2016 TC 204 ISO :2016 TC 206 ISO 14704:2016 ISO 1756 ISO 19635:2016 TC 210 IEC/TR TC 211 ISO 19119:2016 ISO/TS TC 213 ISO 3040:2016 Soil quality - Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation 토양의질 - 광감쇠에의한유화지수측정을통해이소프로판올을추출할수있는유기화합물토양선별 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis 토양의질 - 아르트로박터글로비포미스의탈수소효소활성을이용한고형시료의접촉시험 Intelligent transport systems 지능형교통시스템 Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data 지능형교통시스템 - 자동차량및장비인식 - 자동차량등록인식 (ERI) - 제 3 부 : 차량데이터 Fine ceramics 파인세라믹스 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature 파인세라믹스 - 단일체세라믹스의실온꺾임강도시험방법 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push-rod technique 파인세라믹스 - 열팽창검출봉에의한단일체세라믹스의선열팽창시험방법 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antialgal activity of semiconducting photocatalytic materials 파인세라믹스 - 반도체광촉매물질의항균시험방법 Quality management and corresponding general aspects for medical devices 의료기기의품질관리및제반사항 Medical devices - Part 2: Guidance on the application of usability engineering to medical devices 의료기기 - 제 2 부 : 의료기기의사용적합성공학적용에관한지침 Geographic information/geomatics 지리정보 / 지리정보학 Geographic information - Services 지리정보 - 서비스 Geographic information - Calibration and validation of remote sensing imagery sensors and data - Part 2: Lidar 지리정보 - 원격감지영상센서의보정및검증 - 제 2 부 : 라이더 (Lidar) Dimensional and geometrical product specifications and verification 제품의치수및형상표시방법 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones 제품의형상명세 (GPS) - 치수및공차표시 - 원뿔 15

16 ISO :2016 ISO TC 216 ISO 10734:2016 ISO 1075 ISO 10764:2016 ISO 17694:2016 ISO 17697:2016 ISO 17698:2016 ISO 1770 ISO 18403:2016 ISO 22649:2016 TC 229 ISO/TR 19716:2016 TC 257 ISO 1774 TC 272 Geometrical product specifications(gps) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-topoint distances 제품의형상명세 (GPS) - 좌표측정시스템 (CMS) 에대한합격판정시험과재검증시험 - 제 10 부 : 지점과지점간거리측정을위한레이저트래커 Geometrical product specifications (GPS) - Surface texture:areal - Part 1: Indication of surface texture 제품의형상명세 (GPS) - 표면질감 : 면적 - 제 1 부 : 표면질감의지시 Footwear 신발류 Footwear - Test method for slide fasteners - Strength of slide fastener pullers 신발류 - 슬라이드파스너시험방법 - 슬라이드파스너풀러의강도 Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing 신발류 - 슬라이드파스너시험방법 - 반복개폐내구성 Footwear - Test method for slide fasteners - Lateral strength 신발류 - 슬라이드파스너시험방법 - 횡방향강도 Footwear - Test methods for uppers and lining - Flex resistance 신발류 - 갑피 (uppers) 와안감 (lining) 의시험방법 - 내굴곡성 Footwear - Test methods for uppers, lining and insocks - Seam strength 신발류 - 갑피 (uppers) 와안감 (lining) 및깔개 (insock) 의시험방법 - 봉합강도 Footwear - Test methods for uppers - Delamination resistance 신발류 - 갑피 (uppers) 시험방법 - 층박리저항 Footwear - Test methods for uppers, lining and insocks - Colour migration 신발류 - 갑피 (uppers) 와안감 (lining) 및깔개 (insock) 의시험방법 - 색이염성 Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral force 신발류 - 슬라이드파스너시험방법 - 수평방향힘에의한폐쇄시손상저항성 Footwear - Test methods for insoles and insocks - Water absorption and desorption 신발류 - 안창 (insoles) 과깔개 (insocks) 의시험방법 흡수도와배출도 Nanotechnologies 나노기술 Nanotechnologies - Characterization of cellulose nanocrystals 나노기술 - 셀룰로오스나노크리스탈의특성 Evaluation of energy savings 에너지절감평가 General technical rules for measurement, calculation and verification of energy savings of projects 프로젝트의에너지절감측정, 계산, 검증을위한일반기술규칙 Forensic sciences 법과학 16

17 ISO 18385:2016 JTC 1 ISO/IEC 10646:2014/Amd ISO/IEC/IEEE 1888 ISO/IEC/IEEE 18883:2016 ISO/IEC :2016 ISO/IEC TS ISO/IEC 2655 ISO/IEC TR ISO/IEC 29169:2016 ISO/IEC ISO/IEC ISO/IEC :2016 ISO/IEC 27039:2015 ISO/IEC :2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes - Requirements 법과학용도로생물학적시료수집, 보관, 분석에사용되는제품의인간 DNA 오염위험성최소화 - 요구사항 Information technology 정보기술 Information technology - Universal Coded Character Set (UCS) - Amendment 2: Bhaiksuki, Marchen, Tangut, and other characters 정보기술 - 범용문자집합 (UCS) - 개정 2: 바이수키, 메르헨, 탕구트및기타문자 Information technology - Ubiquitous green community control network - Control and management 정보기술 - 유비쿼터스그린커뮤니티컨트롤네트워크 - 제어및관리 Information technology - Ubiquitous green community control network - Security 정보기술 - 유비쿼터스그린커뮤니티컨트롤네트워크 - 보안 Information technology - IT asset management - Part 3: Entitlement schema 정보기술 - IT 자산관리 - 제 3 부 : 소프트웨어자격부여스키마 Systems and software engineering - Life cycle management - Part 1: Guidelines for life cycle management 시스템및소프트웨어엔지니어링 - 수명주기관리 - 제 1 부 : 수명주기관리지침 Software and systems engineering - Tools and methods for product line requirements engineering 소프트웨어및시스템엔지니어링 - 제품라인공학을위한도구및방법 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 2-2: Guide for the development of domain-specific profiles 시스템및소프트웨어엔지니어링 - 영세기업을위한생애주기프로파일 (VSEs) - 제 2-2 부 : 도메인에특화된프로파일개발지침 Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity 정보기술 - 프로세스평가 - 프로세스품질특성및조직성숙도평가에적합성평가방법의적용 Information technology - Home network resource management - Part 1: Requirements 정보기술 - 홈네트워크자원관리 - 제 1 부 : 요구사항 Information technology - Home network resource management - Part 2: Architecture 정보기술 - 홈네트워크자원관리 - 제 2 부 : 아키텍처 Information technology - Home network resource management - Part 3: Management application 정보기술 - 홈네트워크자원관리 - 제 3 부 : 관리어플리케이션 Information technology - Security techniques - Selection, deployment and operations of intrusion detection and prevention systems (IDPS) 정보기술 - 보안기술 - 침입탐지및차단시스템 (IDPS) 의선정, 배치, 운영 Information technology - MPEG systems technologies - Part 8: Coding-independent code points 정보기술 - MPEG 시스템기술 - 제 8 부 : 코딩독립적코드포인트 17

18 ISO/IEC 29177:2016 ISO/IEC TR 15440:2016 ISO/IEC ISO/IEC :2015 ISO/IEC TR 30125:2016 ISO/IEC ISO/IEC :2016 Information technology - Automatic identification and data capture technique - Identifier resolution protocol for multimedia information access triggered by tag-based identification 정보기술 - 자동식별및데이터획득기술 - 태그기반식별에의한멀티미디어정보접근을위한식별자해석프로토콜 Information technology - Future keyboards and other input devices and entry methods 정보기술 - 미래형키보드와기타입력장치및입력방법 Information technology - Cross-jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems 정보기술 - 생체인식기술의구현에따른법제사회적측면 - 생체인식시스템에서사용하기위한픽토그램, 아이콘, 기호 Information technology - Biometric Identity Assurance Services - Part 1: BIAS services 정보기술 - 생체인식신원보증서비스 - 제 1 부 : BIAS 서비스 Information technology - Biometrics used with mobile devices 정보기술 - 모바일기기사용을위한생체인식 Information Technology - Data Centres - Key performance indicators - Part 2: Power usage effectiveness (PUE) 정보기술 - 데이터센터 - 핵심성과지표 - 제 2 부 : 전력효율지수 (PUE) Information Technology - Data Centres - Key performance indicators - Part 3: Renewable Energy Factor (REF) 정보기술 - 데이터센터 - 핵심성과지표 - 제 3 부 : 재생에너지사용효율 (REF) 18