IR Speed Dome Camera VER.1.10-110927 HSDC-364NI-15 사용설명서 사용전에이설명서를잘읽어보신후찾기편리한곳에보관하시기바랍니다.
1. 경고및주의사항 경고 화재나감전의위험을줄이기위하여, 이제품을비또는습기가있는곳에노출하지마십시오. 통풍을위해뚫린홈을통해금속성물질을넣지마십시오. 주의 주의감전위험열지마시오 주의 : 감전의위험이있으니열지마시오. 기기내부에는사용자가조정할부분이없으니, 서비스를의뢰하십시오. 심볼설명 삼각형내의화살표로되어있는번개표시는제품의노출된부분에인체에감전의위험이있는수준의전압이흐르고있음을나타내고있습니다. 삼각형내의느낌표는운용및유지보수 ( 서비스 ) 에대한중요한지침서가제품에딸려있음을나타내고있습니다. 1
2. 사용시주의사항 사용자께서시스템을사용하기전에아래의사항을확인하십시오. 습기, 먼지나그을음이많은장소에는설치하지마십시오. 직사광선이들어오는곳이나난방기구등열이많이발생하는장소는설치하지마십시오. 제품을떨어뜨리거나충격을주지마십시오. 진동이심한곳이나자석종류가있는곳으로부터멀리하여주십시오. 아주더운곳이나추운곳에는설치하지마십시오. 통풍을위해서뚫린홈에도전성물체가빠지지않도록주의하십시오. 설치전에반드시전원을꺼주십시오. 천둥, 번개가칠때는전원플러그를빼주세요. ( 화재및고장의원인이될수있습니다.) 시스템의배선을연결하기위한충분한공간을확보하십시오. 흔들림이없는장소나통풍이잘되는곳에서작업을하십시오. 라디오, TV등의무선기기에근접하여설치하면장애의원인이되는경우가있으니주의하십시오. 본기기를임의적으로분해하지마십시오. 낙뢰등의자연재해또는, 설치부주의로인한제품손상은보증기간내라도유상 AS 처리됩니다. 2
3. 규격 및 사양 특징(Features) 광학 36배 700 TVL 해상도 구현 Day & Night(ICR) Digital Noise Reduction(2D+3D) Privacy Mask Function Multi protocol support (Pelco-D, Pelco-P) IP66 등급의 Weather Proof 이중 선 쉴드 하우징 구조 80m~150m 적외선 투광기 일체형 스피드 돔 카메라 360 Endless 200 /sec 초고속 회전 255Preset 및 10Points Auto scan기능 지원 줌 배율에 따른 IR 자동ON/ Specification 모델명 1/4" Sony Super HAD II (Double scan) CCD 1/4" Sony Super HAD CCD 총화소수 52만 화소, 1028H x 508V 41만 화소, 811(H) x 508(V) x36(f=3.4 ~ 122.4mm), F1.6(Wide) ~ F4.5(Tele) x37 (f=3.4 to 125.8mm), F1.6(Wide) ~ F4.5(Tele) ~ x16 가변 (총 x576) ~ x16 가변 (총 x592) 700 TV본(Color) 800 TV본(BW) 580TV본 Color : 0.5 lux, BW : 0.2 lux, IR : 0 lux Color : 0.5 lx, BW : 0.05 lx, IR : 0 lx Color DSS : 0.001 lux, BW DSS : 0.0004 lux Color DSS : 0.001 lx, BW DSS : 0.00001 lx 디지털줌 수평해상도 최저조도 후면 Dimension 전자셔터 S/N비 White Balance 1/60 ~ 1/100,000sec 50dB 이상 (AGC Off) ATW / One-Push / Indoor / Outdoor / Manual / Auto ATW / Indoor / Outdoor / Manual / AWC WDR / BLC Off / WDR / BLC Day & Night Auto / Sens-in / Ext / Day / Night Privacy Zone Masking Off / 16 positions Off / 8 positions Motion Detection Off / 3 positions Off / On Object Detection Off / On - Pan Range Pan 360 전 방위 연속회전(Endless) Pan Speed 0.05 ~200 /sec Tilt Range Tilt -0 ~ 90 Tilt Speed 0.01 ~40 /sec Preset 적외선 투광기 IP Grade 통신(제어 신호) Protocol 255 Preset, : 10 Position Auto Scan SUPER Chip IR 원거리 7pcs, IR LED 근,중거리 56pcs 줌 배율에 따라 원거리 근거리 IR 자동 조절 IP66 Standard Weather Proof RS-485 Pelco-D, Pelco-P, 2400~9600bps 자동설정 온도조절 하우징 내 자동 온도조절, 방열판식 외장 케이스 사용전원 AC24V 2A 크기, 무게, 온도 3 HSDC-373NI-15 HSDC-373NI-15W 촬상소자 렌즈 정면 HSDC-364NI-15 HSDC-364NI-15W 224(Ø) x 306mm(H), 3.3kg, -30 C ~ +60 C
4.1 Protocol & baud rate setting ON ON 2WS 1WS 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 SW1 Protocol & baud rate toggle switch SW2 address code toggle switch 기본 설정은 Pelco-D, 2400 bps, Address NO 1 입니다. <그림4-1. Protocol & baud rate 위치> 4.1.1 Protocol & baud rate setting Auto identification protocol & baud rate PELCO-D&2400BPS PELCO-P&9600BPS 4.1.2 Protocol setting Protocol SW1-1 SW1-2 SW1-3 Auto identification or PELCO-D TA01 ON PELCO-P ON GA Industry agreement ON ON Reserves 4.1.3 baud rate setting Baud rate SW1-4 SW1-5 2400bps ON 4800bps ON 9600bps ON ON Auto identification or 1200bps 4
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 1 ON 2 ON 3 ON ON 4 ON 5 ON ON 6 ON ON 7 ON ON ON 8 ON 9 ON ON 10 ON ON 11 ON ON ON 12 ON ON 13 ON ON ON 14 ON ON ON 15 ON ON ON ON 16 ON 17 ON ON 18 ON ON 19 ON ON ON 20 ON ON 21 ON ON ON 22 ON ON ON 23 ON ON ON ON 24 ON ON 25 ON ON ON 26 ON ON ON 27 ON ON ON ON 28 ON ON ON 29 ON ON ON ON 30 ON ON ON ON 31 ON ON ON ON ON 32 ON 5
SW2 PELCO-D address code setting (continued) Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 33 ON ON 34 ON ON 35 ON ON ON 36 ON ON 37 ON ON ON 38 ON ON ON 39 ON ON ON ON 40 ON ON 41 ON ON ON 42 ON ON ON 43 ON ON ON ON 44 ON ON ON 45 ON ON ON ON 46 ON ON ON ON 47 ON ON ON ON ON 48 ON ON 49 ON ON ON 50 ON ON ON 51 ON ON ON ON 52 ON ON ON 53 ON ON ON ON 54 ON ON ON ON 55 ON ON ON ON ON 56 ON ON ON 57 ON ON ON ON 58 ON ON ON ON 59 ON ON ON ON ON 60 ON ON ON ON 61 ON ON ON ON ON 62 ON ON ON ON ON 63 ON ON ON ON ON ON 64 ON 6
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 65 ON ON 66 ON ON 67 ON ON ON 68 ON ON 69 ON ON ON 70 ON ON ON 71 ON ON ON ON 72 ON ON 73 ON ON ON 74 ON ON ON 75 ON ON ON ON 76 ON ON ON 77 ON ON ON ON 78 ON ON ON ON 79 ON ON ON ON ON 80 ON ON 81 ON ON ON 82 ON ON ON 83 ON ON ON ON 84 ON ON ON 85 ON ON ON ON 86 ON ON ON ON 87 ON ON ON ON ON 88 ON ON ON 89 ON ON ON ON 90 ON ON ON ON 91 ON ON ON ON ON 92 ON ON ON ON 93 ON ON ON ON ON 94 ON ON ON ON ON 95 ON ON ON ON ON ON 96 ON ON 7
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 97 ON ON ON 98 ON ON ON 99 ON ON ON ON 100 ON ON ON 101 ON ON ON ON 102 ON ON ON ON 103 ON ON ON ON ON 104 ON ON ON 105 ON ON ON ON 106 ON ON ON ON 107 ON ON ON ON ON 108 ON ON ON ON 109 ON ON ON ON ON 110 ON ON ON ON ON 111 ON ON ON ON ON ON 112 ON ON ON 113 ON ON ON ON 114 ON ON ON ON 115 ON ON ON ON ON 116 ON ON ON ON 117 ON ON ON ON ON 118 ON ON ON ON ON 119 ON ON ON ON ON ON 120 ON ON ON ON 121 ON ON ON ON ON 122 ON ON ON ON ON 123 ON ON ON ON ON ON 124 ON ON ON ON ON 125 ON ON ON ON ON ON 126 ON ON ON ON ON ON 127 ON ON ON ON ON ON ON 128 ON 8
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 129 ON ON 130 ON ON 131 ON ON ON 132 ON ON 133 ON ON ON 134 ON ON ON 135 ON ON ON ON 136 ON ON 137 ON ON ON 138 ON ON ON 139 ON ON ON ON 140 ON ON ON 141 ON ON ON ON 142 ON ON ON ON 143 ON ON ON ON ON 144 ON ON 145 ON ON ON 146 ON ON ON 147 ON ON ON ON 148 ON ON ON 149 ON ON ON ON 150 ON ON ON ON 151 ON ON ON ON ON 152 ON ON ON 153 ON ON ON ON 154 ON ON ON ON 155 ON ON ON ON ON 156 ON ON ON ON 157 ON ON ON ON ON 158 ON ON ON ON ON 159 ON ON ON ON ON ON 160 ON ON 9
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 161 ON ON ON 162 ON ON ON 163 ON ON ON ON 164 ON ON ON 165 ON ON ON ON 166 ON ON ON ON 167 ON ON ON ON ON 168 ON ON ON 169 ON ON ON ON 170 ON ON ON ON 171 ON ON ON ON ON 172 ON ON ON ON 173 ON ON ON ON ON 174 ON ON ON ON ON 175 ON ON ON ON ON ON 176 ON ON ON 177 ON ON ON ON 178 ON ON ON ON 179 ON ON ON ON ON 180 ON ON ON ON 181 ON ON ON ON ON 182 ON ON ON ON ON 183 ON ON ON ON ON ON 184 ON ON ON ON 185 ON ON ON ON ON 186 ON ON ON ON ON 187 ON ON ON ON ON ON 188 ON ON ON ON ON 189 ON ON ON ON ON ON 190 ON ON ON ON ON ON 191 ON ON ON ON ON ON ON 192 ON ON 10
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 193 ON ON ON 194 ON ON ON 195 ON ON ON ON 196 ON ON ON 197 ON ON ON ON 198 ON ON ON ON 199 ON ON ON ON ON 200 ON ON ON 201 ON ON ON ON 202 ON ON ON ON 203 ON ON ON ON ON 204 ON ON ON ON 205 ON ON ON ON ON 206 ON ON ON ON ON 207 ON ON ON ON ON ON 208 ON ON ON 209 ON ON ON ON 210 ON ON ON ON 211 ON ON ON ON ON 212 ON ON ON ON 213 ON ON ON ON ON 214 ON ON ON ON ON 215 ON ON ON ON ON ON 216 ON ON ON ON 217 ON ON ON ON ON 218 ON ON ON ON ON 219 ON ON ON ON ON ON 220 ON ON ON ON ON 221 ON ON ON ON ON ON 222 ON ON ON ON ON ON 223 ON ON ON ON ON ON ON 224 ON ON ON 11
SW2 PELCO-D address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 225 ON ON ON ON 226 ON ON ON ON 227 ON ON ON ON ON 228 ON ON ON ON 229 ON ON ON ON ON 230 ON ON ON ON ON 231 ON ON ON ON ON ON 232 ON ON ON ON 233 ON ON ON ON ON 234 ON ON ON ON ON 235 ON ON ON ON ON ON 236 ON ON ON ON ON 237 ON ON ON ON ON ON 238 ON ON ON ON ON ON 239 ON ON ON ON ON ON ON 240 ON ON ON ON 241 ON ON ON ON ON 242 ON ON ON ON ON 243 ON ON ON ON ON ON 244 ON ON ON ON ON 245 ON ON ON ON ON ON 246 ON ON ON ON ON ON 247 ON ON ON ON ON ON ON 248 ON ON ON ON ON 249 ON ON ON ON ON ON 250 ON ON ON ON ON ON 251 ON ON ON ON ON ON ON 252 ON ON ON ON ON ON 253 ON ON ON ON ON ON ON 254 ON ON ON ON ON ON ON 255 ON ON ON ON ON ON ON ON 12
SW2 PELCO-P address code setting Address code SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8 1 2 ON 3 ON 4 ON ON 5 ON 6 ON ON 7 ON ON 8 ON ON ON 9 ON 10 ON ON 11 ON ON 12 ON ON ON 13 ON ON 14 ON ON ON 15 ON ON ON 16 ON ON ON ON 17 ON 18 ON ON 19 ON ON 20 ON ON ON 21 ON ON 22 ON ON ON 23 ON ON ON 24 ON ON ON ON 25 ON ON 26 ON ON ON 27 ON ON ON 28 ON ON ON ON 29 ON ON ON 30 ON ON ON ON 31 ON ON ON ON 32 ON ON ON ON ON 13
4.2 OSD SETUP MENU 의구성 number Call preset point Set preset point Remarks 50 Start the 1 st pattern Record the 1 st group pattern Pattern scan function 51 Start 1 st preset point patrol Set dwell time of the 1st patrol >> * 1-16 preset point patrol 52 Start 2 nd preset point patrol Set dwell time of the 2 nd patrol >>* 17-32 preset point patrol 53 Start 3 rd preset point patrol Set dwell time of the 3 rd patrol >> * 33-48 preset point patrol 60 Open Camera menu Need camera support 61 Close Screen display Open Screen display Screen character display 62 Close Reduce speed Open Reduce Speed 63 Start Horizontal auto- scan Open/close auto- flip 65 Horizontal auto-scan mode>>* 66 Horizontal sweep mode>>* Set speed of the sweep >>>** 70 Close Mask Open Mask 71 Delete all preset points 72 Close Expert mode Open Expert mode Default is Close mode 73 Close Alarm function Open Alarm function Option 79 Restore factory settings 80 Standby time setting>>* Set Standby action >>* 81 Power up action setting >>* 87 Set Vertical zero position >>* 89 Reboot system 91 Normal installation Inverted installation 95 Open Camera & PTZ menu P/T 메뉴진입우선 96 Stop scanning 97 Start pattern Start 1 st group pattern 98 Start auto-patrol Start 1 st group patrol 99 Start auto-scan Start 1 st group scan 14
4.3 시스템최적화설정 (Pan Tilt Driver-OSD 메뉴 ) Main Menu(preset 95) -> Select[CAMERA SETUP] CAMERA SETUP->Select[OTHER] OTHER> ICR : On AUTO ICR : AUTO 적외선투광기작동시카메라가 B/W 모드로자동전환됨. 15
5.1 카메라부메인메뉴로들어가기 (Preset-60 카메라메뉴진입 ) 메뉴는메인메뉴와서브메뉴로구성되어있습니다. 각메뉴는 7 가지의카메라기능을보여줍니다. 각각의메인메뉴오른쪽에는서브메뉴가표시됩니다. 메뉴를저장하려면 [ 저장 ] 을선택하고, 저장하지않으려면 [ 종료 ] 를, 메뉴를초기화하려면 [ 초기화 ] 를선택하면됩니다 원위치 : 일정시간이상사용자입력이없으면설정된줌배율로복귀하는기능입니다. 꺼짐 / 켜짐 줌위치설정 : 사용자입력이없을때복귀할줌위치를설정합니다. 유지시간 : 사용자입력대기시간입니다. 여기에설정된시간동안사용자입력이없으면원위치로복귀합니다. 5/10/15/20/25/30/35/40/45/50/55/60 초 5.3 노출설정 (Day & Night) 모드 : 노출모드를설정합니다. 자동 / 셔터우선 / 조리개우선 / 수동 5.2 초점설정 모드 : 초점모드를선택할수있습니다. 자동, 줌트리거, 수동 최소초점거리 : 카메라와피사체간의최소거리를선택할수있습니다. 0.1 / 1.3 / 1.8 / 3.0 / 5.0 m (36x ) 0.1 / 1.0 / 1.5 / 2.5 / 6.0 m (22x ) 0.1 / 1.0 / 1.3 / 2.0 / 6.0 m (12x ) 렌즈초기화 : 렌즈를자동으로초기화합니다. 꺼짐 / 켜짐 (1~10일) 디지털줌 : 최대디지털줌확대율을설정할수있습니다. 꺼짐 / 켜짐 ( 최대 2 ~ 19, 21, 23, 25, 28, 32배 ) 자동게인 : 자동게인기능을설정합니다. 꺼짐 / 켜짐 0/2/4/6/8/10/12/14/16/18/20/22/24/26/28/30dB ( 수동모드 ) 셔터속도 : 셔터우선모드나수동모드에서설정가능합니다. NTSC : x512, x128, x64, x32, x16, x8, x4, x2, 1/60, 1/90, 1/100, 1/180, 1/250, 1/500, 1/1000, 1/1500, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec PAL : x512, x128, x64, x32, x16, x8, x4, x2, 1/50, 1/80, 1/120, 1/150, 1/250, 1/500, 1/1000, 1/1500, 1/2000, 1/5000, 1/10000, 1/20000, 1/50000, 1/100000 sec 슬로우셔터스피드 (x2 ~ x512) 는메뉴얼모드에서설정가능합니다. 16
조리개 : 조리개레벨을조리개우선모드에서설정할수있습니다. 1 ~ 18 단계 영상축적 : 최대영상축적을선택할수있습니다. (Digital Slow Shutter) 꺼짐 / 최대 2, 4, 8, 16, 32, 64, 128, 512 배 플리커리스 : 주위조명과주파수불일치로화면떨림 (Flicker) 이발생할경우플리커리스선택하십시오. 꺼짐 / 켜짐 밝기 : 원하는밝기레벨로조절할수있습니다. 1 ( 어두움 ) ~ 15 ( 밝음 ) 단계 역광보정 : 광역역광보정이나 (Wide Dynamic Range) 역광보정 (Back Light Compensation) 모드를선택할수있습니다. 꺼짐 / 광역역광보정 / 역광보정광역역광보정 : 레벨을선택합니다. 1 ~ 7 단계역광보정 : 영역과레벨을설정합니다. 영역 (1 ~ 9), 레벨 ( 낮음 / 중간 / 높음 ) 과자동 / 수동모드 주야간모드 : 주야간모드를선택합니다. 모드선택낮 / 밤 / 자동 / 외부입력전환시간 : 주야간모드가동작시전환동작이일어나는조명조건의유지시간을선택합니다. 5/10/15/20/25/30/35/40/45/50/55/60 초버스트 : 흑백모드선택시버스트를끄거나켤수있습니다. 꺼짐 / 켜짐 5.4 화이트발란스 모드 : 화이트발란스모드를선택합니다. 자동 / 일시보정 / 실내 / 실외 / 수동 / 광역자동자동 : 가능한빛에따라자동으로조절됩니다. 일시보정 : 현재의조명환경에가장적합한상태를얻기위해카메라가흰종이를비추게하고버튼을누르면, 일시적으로조정이됩니다. 환경이바뀌면다시조정해주어야합니다. 실내 : 실내조명에서사용합니다. 실외 : 실외환경에서사용합니다. 수동 : 수동모드에서는미세조정이가능합니다. 적색과청색을증감시키면서원하는값에셋팅합니다. 광역자동 : 광역색온도범위에서사용합니다.( 자동모드보다넓은범위 ) 적색 : 수동모드에서적색값을조절합니다. (0 ~ 255) 청색 : 수동모드에서청색값을조절합니다. (0 ~ 255) 5.5 이미지 ( 잡음제거 ) 잡음제거 : 화면상의디지털잡음을감소시킵니다. 꺼짐 / 1 ~ 10( 잡음감소레벨선택 ) / 자동 ( 잡음제거레벨자동선택 ) 고해상도모드 : 고해상도레벨을선택합니다. 꺼짐 / 켜짐 (1 ~ 7 단계 ) 화면반전 : 화면반전모드를선택합니다. 꺼짐 / 상하 ( 화면을상하로반전시킬수있습니다.) / 좌우 ( 화면을좌우로반전시킬수있습니다.) / 상하좌우 ( 화면을상하, 좌우로반전시킬수있습니다.) 윤곽보정 : 화면윤곽보정레벨을선택할수있습니다. 1 ~ 16 단계 영상효과 : 필름효과및흑백을선택할수있습니다. 꺼짐 / 필름효과 / 흑백 정지화면 : 정지화면기능을선택할수있습니다. 꺼짐 / 켜짐 17
5.6 지능기능 ( 프라이버시설정 ) 프라이버시 : 화면상특정구역을숨길수있습니다. 마스크 # : 마스킹할구역의번호를선택합니다.(1 ~ 16) 모드 : 마스킹기능설정혹은비설정을선택합니다. ( 꺼짐 / 켜짐 ) 모자이크형태 : 모자이크처리정도를설정합니다.(1 ~ 8) 모자이크 : 모자이크보이기를선택합니다.( 꺼짐 / 켜짐 ) 색상 : 마스킹색상을선택합니다. (1 ~ 14) 투명도 : 마스킹의투명도를선택합니다. (0 ~ 3) 위치 : 마스킹할위치를조절합니다. 크기 : 마스킹사이즈를조절합니다. 움직임감지 : 화면상물체의움직임이생기면, 움직임을감지합니다. 모드 : 움직임감지기능설정여부를선택합니다. ( 꺼짐 / 켜짐 ) 영역 # : 움직임감지구역의번호를선택합니다.(1 ~ 3) 활성화 : 각영역의움직임감지기능의활성화여부를선택합니다. ( 꺼짐 / 켜짐 ) 감도 : 미세한움직임도감지하는움직임감도를조절합니다. (1 ~ 20) 휴지기간 : 움직임이감지되어알람이동작하면일정시간동안은다른움직임을감지않아서알람발생되지않도록하는기능입니다. (1 ~ 256 초 ) 유지시간 : 움직임이감지되었을때, 알람과줌프리셋을유지하는시간을설정합니다. (1 ~ 256 초 ) 위치 : 움직임을감지하는위치를설정합니다. 크기 : 움직임감지위치의크기를설정합니다. 줌위치설정 : 알람이발생되었을때줌위치를설정합니다. 사물감지 : 화면에서존재하지않던물체가생기거나, 존재하던물체가사라진경우를감지합니다. 모드 : 사물감지기능의사용여부를결정합니다. ( 꺼짐 / 켜짐 ) 영역 # : 사물감지기능을사용하는구역의번호를선택합니다.(1 ~ 9) 감도 : 사물감지기능의감도를조절합니다. (1 ~ 5) 유지시간 : 사물의변화가감지되었을때, 알람과줌프리셋을유지하는시간을설정합니다. (1 ~ 256sec) 줌위치설정 : 알람이발생되었을때줌위치를설정합니다. 18
5.7 디스플레이설정 디스플레이선택 : 화면에표시되는항목을선택합니다. 아이디 : 꺼짐 / 켜짐타이틀 : 꺼짐 / 켜짐줌배율 : 꺼짐 / 켜짐 초기화면선택 : 제품의전원을켰을때나타나는초기화면을설정합니다. 아이디 : 꺼짐 / 켜짐통신속도 : 꺼짐 / 켜짐프로토콜 : 꺼짐 / 켜짐버전 : 꺼짐 / 켜짐초기메시지 : 꺼짐 / 켜짐 타이틀설정 : 카메라타이틀텍스트를설정합니다.( 텍스트편집 ) 초기메시지설정 : 카메라초기메시지텍스트를설정합니다..( 텍스트편집 ) 언어 : 표시될언어를선택합니다. 영어 / 한국어 ( 혹은영어 / 중국어 ) 설정상태 : 현재 OSD 설정상태를보여주고공장출하시설정된값과비교해줍니다. 19
6. 현장설치및문제해결방안 45 문제발생원인해결방안 1) 카메라전원공급이안되었을경우 1) 전원연결및전원공급장치확인 영상및기기조작이안될때 2) 아답터출력이 24VAC 3A 보다낮을 경우 2) 제품에맞는 24VAC 3A 아답터 사용 3) 카메라본체와아답터의거리가 너무멀경우 3) 카메라본체와아답터의거리는 10m 이내 4) 전원퓨즈 PCB 의불량시 3) 퓨즈교체, 퓨즈는 2A 사용 1) ID address 설정이잘못됐을때 1) ID address 를재설정 2) protocol 설정이잘못됐을때 2) Protocol 을재설정 부팅및영상만정상일경우 3) RS485 케이블의 +, - 연결이 올바르지않을경우 3) RS485 의 + 와 연결상태확인 4) RS485 케이블이너무길경우 4) RS485 통신의최장거리는 1.2km 20
MEMO 시큐리티솔루션사업부한국하니웰주식회사주소 : 서울시마포구상암동 DMC 1590 B4-4Block 상암 IT 타워 5 층 http : //www.honeywell.co.kr/security E-mail : info.security@honeywell.com Printed in Korea 구입문의 TEL: 02)799-6063, 6187, 6064, 6299, 3513 FAX: 02)799-6188 AS 및기술문의 TEL: 02)799-6121~4 21