데이터시트 아루바 228 액세스포인트 혹독한실내환경을위한 802.11ac 견고하게설계된아루바 228 무선액세스포인트는물류창고, 산업용냉동시설, 스타디움등외부날씨로부터차단된혹독한실내환경에서 802.11ac 모바일기기에기가빗 Wi-Fi 성능을제공합니다. 5-GHz 대역에서최대데이터속도 1.3 Gbps, 2.4-GHz 대역에서 600 Mbps를제공하는아루바 228 액세스포인트는 802.11n AP보다 3배빠르며유선수준의성능을제공합니다. 228 AP에는 ClientMatch 기술이탑재되어있습니다. ClientMatch 기술은모바일디바이스들로부터지속적으로세션성능메트릭스를취합하여 Sticky Clients 를제거합니다. 이정보는각각의모바일디바이스를 WLAN 상에서최적의 AP와최적의라디오 (radio) 로보내는데사용됩니다. 능동적인 ClientMatch 는사용자들의이동과 RF 컨디션의변화에따라다이나믹하게 Wi-Fi 클라이언트성능을최적화시킵니다. 어떤모바일디바이스가기존에연결된 AP의영역에서벗어나거나 RF 간섭으로성능저하가발생할경우, ClientMatch 는자동적으로해당디바이스를보다나은 AP로이동시킵니다. ClientMatch 를통해 228 AP는웹페이지로딩속도와비디오스트리밍품질을더욱향상시키며, 제한된영역에서더많은수의모바일디바이스들을지원합니다. ClientMatch 가없는 802.11ac 네트워크는성능면에서 802.11n WLAN과별차이가없습니다. 228 AP는디바이스상에서암호화된화상회의, 음성통신, 채팅, 데스크탑공유등마이크로소프트 Lync 트래픽에대한우선처리및정책실행을지원합니다. 차별화된강점 혹독한실내환경을위한산업용설계 - 난방및냉각이갖춰지지않은혹독한실내환경을위한폭넓은운영온도지원 - 먼지와습기를차단하는밀봉된커넥터인터페이스 - 하이게인 (high gain) LPV(large public venue) 안테나를지원하는커넥터라이즈드 (Connectorized) 안테나포트 - 물리적보안강화설계 1.9 Gbps 통합처리량 (aggregate throughput) 제공 - 2개의기가빗이더넷포트상에서 EtherChannel 링크어그리게이션으로 1.9 Gbps 처리량제공 최대 1.9 Gbps 의통합데이터속도지원 - 802.11ac 전송빔포밍 (beam-forming) 으로신호, 처리 량, 멀티스트림운영강화 - 5 GHz 대역 802.11ac 클라이언트에 1.3 Gbps 속도 지원 - 2.4 GHz 대역에서작동하는 TurboQAM- 인에이블드모바일 기기를위해최대 600 Mbps 지원 동급최강의 RF 관리 - 통합된 Adaptive Radio Management 기술이 2.4- GHz 및 5-GHz 주파수를관리하고 AP 들이 RF 간섭을받지 않도록보장. 스펙트럼분석 - 파트타임또는전용 Air Monitoring 이가능한 Spectrum Analyzer 가 2.4-GHz 및 5-GHz 주파수대를원격스캔하여 RF 간섭요인을탐지. 무선메시 - 이더넷단자 (Ethernet drops) 가없는곳에서는무선 메시 (Wireless mesh) 를통해쉬운연결을제공. 보안 - 통합된무선침입방지기능이위협방어및대응을 제공하며, 별도의 RF 센서와보안어플라이언스필요성을 제거. - OpenDNS 서비스연동을통해 Aruba Instant AP 는 WLAN 에연결된모든디바이스들에대해통합웹필터링과 맬웨어감염및봇넷방어제공. - 암호화된 IPsec VPN 터널을통해리모트유저들을안전하게기업네트워크리소스로연결. - 통합 TPM(Trusted Platform Module) 이크리덴셜및 암호키가저장된스토리지에대한보안을제공. - 유선이더넷트래픽의안전한터널링을위한 SecureJack 포트제공.
운영모드선택 228 AP 는운영모드선택옵션을통해조직이관리및구축요구에 맞는최적의운영모드를선택할수있도록해줍니다. ArubaOS 가탑재된 Controller-managed AP 또는 Remote AP (RAP) 가 Aruba Mobility Controller 에의해 관리되는경우 : 228 AP 는분산및중앙트래픽포워딩은물론, 중앙컨피규레이션, 데이터암호화, 정책실행, 네트워크서비스 를제공합니다. InstantOS 가탑재된 Aruba Instant AP 모드에서는 하나의 AP 가자동적으로무선관련설정을네트워크내의다른 Instant AP 들에게배포합니다. 간단히 Instant AP 하나의 전원을켜는것만으로무선설정및다른 AP 들과의연동이 자동으로실행됩니다. 이모든프로세스가약 5 분만에모두 완료됩니다. Spectrum Analysis: RF 간섭원파악 Air Monitor: 무선침입방지 (Intrusion Protection) 제공 Hybrid AP 가 Wi-Fi 클라이언트를지원하고, 무선침입 방지및스펙트럼분석을제공 Secure Enterprise Mesh 여러사이트의대규모인스톨시, Aruba Activate 서비스를통해디 바이스프로비저닝, 펌웨어업그레이드, 인벤토리관리를자동화함으로 써구축시간을획기적으로단축할수있습니다. Aruba Activate 은 공장에서출고된 Instant AP 들이어느사이트로직배송되더라도전원 만켜면자동구성되도록해줍니다. WLAN 과네트워크의요구사항이변화하면, 빌트인마이그레이 션경로를사용해 228 Instant AP 들을 Mobility Controller 에 의해중앙관리되는 AP 로손쉽게전환할수있습니다. AP-228 SPECIFICATIONS 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors. WIRELESS RADIO SPECIFICATIONS AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n --In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate. Software-configurable dual radio supports 5 GHz and 2.4 GHz 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate Supported frequency bands (country-specific restrictions apply): --2.4000 GHz to 2.4835 GHz --5.150 GHz to 5.250 GHz --5.250 GHz to 5.350 GHz --5.470 GHz to 5.725 GHz --5.725 GHz to 5.850 GHz Available channels: Dependent upon configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: --802.11b: Direct-sequence spread-spectrum (DSSS) --802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) --802.11n/ac: 3x3 MIMO with up to three spatial streams Supported modulation types: --802.11b: BPSK, QPSK, CCK --802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM --802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dbm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): --2.4-GHz band: +23 dbm (18 dbm per chain) --5-GHz bands: +23 dbm (18 dbm per chain) Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery Supported data rates (Mbps): --802.11b: 1, 2, 5.5, 11 --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 --802.11n: 6.5 to 450 (MCS0 to MCS23) --802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) 802.11n high-throughput (HT) support: HT 20/40
802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU POWER Worst-case power consumption from the AP: 23W Power sources sold separately Power over Ethernet (PoE+): 802.3at-compliant ANTENNAS Six RP-SMA connectors for external antennas OTHER INTERFACES Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45) --Auto-sensing link speed and MDI/MDX --Load balancing support to achieve platform throughput greater than 1 Gbps --PoE-PD: 802.3at PoE+ Serial console interface (Micro USB) MOUNTING Optional mounting kits: --AP-130-MNT or AP-220-MNT-W1 are directly compatible --270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized MECHANICAL Dimensions/weight (unit, excluding mount accessories): --230 mm (W) x 220 mm (D) x 130 mm (H), 9.0 (W) x 8.7 (D) x 5.1 (H) --2.145 kg/4.72 lbs REGULATORY FCC/Industry of Canada CE Marked R&TTE Directive 1995/5/EC Low Voltage Directive 72/23/EEC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. REGULATORY MODEL NUMBERS AP-228 and IAP-228: APIN0228 CERTIFICATIONS CB Scheme Safety, ctuvus UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n/ac WARRANTY Limited lifetime warranty MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS ArubaOS 6.4.3.0 Aruba Instant 4.1.2.0 ENVIRONMENTAL Operating: --Temperature: -40 C to +60 C (-40 F to +140 F) --Humidity: 5% to 95% non-condensing --Storage and transportation: --Temperature: -40 C to +70 C (-40 F to +158 F) --Operating Altitude: 3,000 m
RF PERFORMANCE TABLE Maximum transmit power (dbm) per transmit chain Receiver sensitivity (dbm) per receive chain 802.11b 2.4 GHz 1 Mbps 23.0-92.0 2 Mbps 23.0-92.0 5.5 Mbps 23.0-90.0 11 Mbps 23.0-88.0 802.11g 2.4 GHz and 802.11a 5 GHz 6 Mbps 23.0-88.0 54 Mbps 18.0-75.0 802.11n HT20 2.4 GHz and 5 GHz MCS0/8 23.0-88.0 MCS7/15 17.0-71.0 802.11n HT40 2.4 GHz and 5 GHz MCS0/8 23.0-85.0 MCS7/15 17.0-68.0 802.11ac VHT20 5 GHz MCS0 23.0-88.0 MCS9 16.0-65.0 802.11ac VHT40 5 GHz MCS0 23.0-85.0 MCS9 16.0-62.0 802.11ac VHT80 5 GHz MCS0 23.0-82.0 MCS9 16.0-59.0
ORDERING INFORMATION Part Number Description AP-228 Access Points AP-228 IAP-228-RW IAP-228-US IAP-228-JP Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors regulatory domain: Rest of World regulatory domain: United States regulatory domain: Japan AP-228 Access Points (FIPS/TAA) AP-228-F1 Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors (FIPS/TAA) AP-228 Accessories AP-130-MNT Aruba Series Access Point Mount Kit (basic, flat surface). Off White in Color AP-220-MNT-W1 Aruba 220 Series Access Point Mount Kit (basic, flat surface). Contains 1x flat surface wall/ceiling mount bracket. Color: black. AP-270-MNT-ADP AP-270-MNT-V1 AP-270-MNT-V2 AP-270-MNT-H1 AP-270-MNT-H2 Adapter to allow AP-228 to use outdoor AP-270 series brackets Long Pole/Wall Mount for AP-270 300 mm from vertical mounting asset Short Pole/Wall Mount for AP-270 75 mm from vertical mounting asset Aruba 270 Series Outdoor AP Hanging Tilting Wall Mount Kit Aruba 270 Series Outdoor AP Horizontal or Vertical Flush Mount kit Generic Indoor AP Accessories (see info on Aruba web site for part numbers) PD-9001GR-AC 30W 802.3at POE midspan injector, 10/100/1000Base-T Ethernet PD-9001GO-DC 1 Port 802.3at PoE Midspan 10/100/1000 802.3 at Outdoor; 12-24V DC in 48V PoE out; No power cord shipped with this injector. PD-9001GO-NA PD-9001GO-INTL 1 Port 802.3at PoE Midspan 10/100/1000 802.3 at Outdoor; NA power cord 1 Port 802.3at PoE Midspan 10/100/1000 802.3 at Outdoor; EU/International power cord Antennas 아루바네트웍스코리아 www.arubanetworks.co.kr 서울시강남구삼성동트레이드타워 14층우 )135-729 Tel. 02-6000-8690 Fax. 02-6000-8698 dl-korea@arubanetworks.com www.arubanetworks.com 2015 Aruba Networks, Inc. Aruba Networks, Aruba The Mobile Edge Company (stylized), Aruba Mobilty Management System, People Move. Networks Must Follow., Mobile Edge Architecture, RFProtect, Green Island, ETIPS, ClientMatch, Bluescanner and The All Wireless Workspace Is Open For Business are all Marks of Aruba Networks, Inc. in the United States and certain other countries. The preceding list may not necessarily be complete and the absence of any mark from this list does not mean that it is not an Aruba Networks, Inc. mark. All rights reserved. Aruba Networks, Inc. reserves the right to change, modify, transfer, or otherwise revise this publication and the product specifications without notice. While Aruba Networks, Inc. uses commercially reasonable efforts to ensure the accuracy of the specifications contained in this document, Aruba Networks, Inc. will assume no responsibility for any errors or omissions. DS_AP228_020315