HDR l HDMI Splitter 사용자매뉴얼
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ClassⅠ construction An apparatus with CLASSⅠ construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 3
Disconnection Device Disconnect the main plug from the apparatus, if it s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on the apparatus. DigitalZone will not be responsible for any problems caused by using any other adopter we don't provide. Where the MAIN plug or an appliance coupler is used as the disconnect device, The disconnect device shall remain readily operable. Listing of manufacturers and models of the relevant power supplies. 1. Dee Van Electronics (Longchan) Co., Ltd 2. DSA-42D-12 3 120300 4
User s Manual FCC Information (for U.S.A) Note: This equipment has been tested and found to comply with the limits for a Class a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment under FCC rules. NOTE ON RECYCLING (for EUROPE) This product s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste. This product and the accessories packed together constitute the applicable product according to the WEEE directive except batteries 5
HDMI Splitter 안전을위한주의사항 신체적위험이나재산상의피해를막기위한내용으로반드시지켜주시기바랍니다. 평평한곳에설치해주세요. 햇빛이직접비치거나추운곳에서 사용하지마세요. 먼지나물등이들어가지않도록하세요. 분해하거나수리, 개조하지마세요. 제품위에물컵등을얹어놓지마세요. 진동이심한곳이나자석류가있는곳에서 멀리놓아주세요. 통풍이잘되는곳에놓아주세요. 제품위에물건을올려놓지마세요. Copyright 2016, 디지털존. All rights reserved. - 사용설명서의내용중일부또는전부를무단복제하는것은금지되어있습니다. - 제품의사양은기능향상을위하여예고없이변경될수있습니다. - 디지털존로고는 디지털존의등록상표입니다. - 기타명칭이나상표는각소유자의등록상표입니다. - 이기기는업무용 (A 급 ) 으로전자파적합등록을한기기이오니판매자또는사용자는이점을주의하시기바라며, 가정외의지역에서사용하는것을목적으로합니다. - A/S 접수 : 02-6330-2343 6
User s Manual Contents 안전을위한주의사항 6 목차 7 각부분의이름 8 제품구성물 09 리모컨버튼의이름과기능 10 리모컨건전지삽입하기 10 연결하기 11 HDMI Splitter 사용법 12 문제해결하기 13 USB ( 펌웨어업그레이드 ) & RS-232 ( 외부컨트롤 ) 13 Key Lock / Unlock 설정방법 14 Firmware 업데이트 15 EDID Emulation Mode 선택방법 16 1. Dynamic mode 16 2. Static mode 17 고장신고전확인사항 18 제품규격 19 7
HDMI Splitter 각부분의이름 앞면 뒷면 (HVS-6208) 뒷면 (HVS-6204) 8
User s Manual 사용전에내용물이빠짐없이들어있는지확인하세요. 제품구성은사전에공지없이변경될수있습니다. 당사에서제공하는아답터를반드시사용하시기바랍니다. 다른아답터를사용하여발생되는문제점에대해서는당사가책임을지지않습니다. 구성물이외에추가물품은별도로구매하시려면제조사또는구매처에문의하시기바랍니다. ( 전화 02-6330-2338) 9
HDMI Splitter 리모컨버튼의이름과기능 리모컨은본체에서 3~5M 거리에좌우상하 60도에서작동합니다 본체와리모컨의거리가멀거나다른물체에가려사용이불가능할경우외부리모컨수신부를이용하여작동시킬수있습니다. - 외부리모컨수신부 삽입전에는본체의전원을꺼주세요. 리모컨건전지삽입하기 1. 건전지삽입부를당겨뺍니다. 2. "+" 극이위로향하게삽입하세요. 3. 삽입부를밀어넣으세요. 10
User s Manual 연결하기 HDMI 케이블로연결하는방법입니다. (ex. 입력 : Blu-ray Player, FHD/UHD Stream Generator, 출력 : FHD/UHD TV) 2160p/60Hz, 1080p/50~60Hz, 720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz(High Refresh Rate) 를지원하기위해서는 High speed HDMI Cable 을반드시사용하시기바랍니다. 영상의분배를위해별도의케이블이필요하시면제조사또는구매처에문의하시기 바랍니다. 11
HDMI Splitter HDMI Splitter 사용법 1. HDMI Splitter 의전원스위치를켭니다. 2. 사용하려는영상입력기기 (Blu-ray Player or FHD/UHD Set-top box, etc.) 의전원을켭니다. 3. 디스플레이기기 (FHD/UHD TV etc) 의전원을켭니다. 4. 사용하려는영상출력기기와연결된입력번호를선택합니다. HDMI Splitter 전면부의 Input1~Input2 버튼을누르면됩니다. 4K(2160p) 급의고화질영상출력장비 (Blu-ray Player) 를연결하여사용하는경우 Output 단자와연결된디스플레이기기는 UHD 급고화질 TV 의 UHD 급입력단자이어야 합니다. 12
User s Manual 문제해결하기 1. HDMI 전면부의 LED 가켜져있는지확인하시기바랍니다. 2. HDMI 와연결된기기들의전원케이블이제대로연결되어있는지확인합니다. 좀더자세한사항은 www.digitalzone.co.kr 에서확인하시기바랍니다. USB ( 펌웨어업그레이드 ) & RS-232 ( 외부컨트롤 ) USB : 펌웨어업그레이드가있다면, USB 를통하여손쉽게 업그레이드가가능합니다. (USB 파일시스템은 FAT32 만가능합니다.) RS-232 : 당사의컨트롤프로토콜이제공하는시리얼포트를 통해외부컨트롤이가능합니다. 13
HDMI Splitter Key Lock / Unlock 설정방법 Lock 설정 Lock 설정 Unlock 설정 Unlock 설정 Front Key Lock 입력채널 (1 or 2) 을길게 2~3 초눌러주세요. Unlock F 키를 3 회누른후 1->3->2->4 순으로눌러주세요. IR Remote Lock F 버튼을 3 회누른후 input1 버튼을눌러주세요. Unlock F 버튼을 3 회누른후 input2 버튼을눌러주세요. Lock 상태 입력채널의 LED 가깜박입니다. 파워키및모든동작변경불가, Unlock 동작을위한설정만사용가능. 14
User s Manual Firmware 업데이트 준비작업 1. USB Memory Stick 을 Computer 에연결하여포맷합니다. * USB Memory Stick 의파일시스템을 FAT32 Type 으로설정하여포맷합니다. 2. 최신의 Micom Firmware File 을 USB Memory Stick 으로복사합니다. 3. Micom Firmware File Copy 가완료되면 USB Memory Stick 을안전제거합니다. Firmware 작업 1. S6 제품에전원을공급합니다. 2. S6 제품 Rear 에위치한 USB Port 에준비된 Memory Stick 을연결합니다. 3. Firmware Update 가자동으로시작됩니다. 15
HDMI Splitter EDID Emulation Mode 선택방법 1. Dynamic mode Function Number Mode Summary Description F1 Normal Safety configuration 모든출력장치의교집합을취함 F2 MaxAudio Max audio 모든출력장치중 Audio 부분은최대값을취함 F3 Copy 1st HDMI Port 첫번째출력장치의 EDID 를사용함 F4 MaxAll Max all capability 모든출력장치의합집합을취함. 설정방법 1. 전면부의 F키를 2초이상누릅니다. 2. FE2~FE3 LED가깜박입니다. 3. 1~4번중선택합니다. 4. 선택한 Function Number(FE1~FE4)LED가켜지며설정이됩니다. 16
User s Manual 2. Static mode Function Number Mode Summary Description F5 1080i Force 1080i F6 1080p Force 1080p F7 4K Force 4K F8 4K-6G Force 4K-6G Audio : 2Ch, PCM Video : 1080i/50,60Hz Audio : 2Ch, PCM Video : 1080p/50,60Hz Audio : 2Ch, PCM Video : 2160p/30Hz or Equiv Audio : 2Ch, PCM Video : 2160p/60Hz or Equiv 설정방법 1. 전면부의 F키를더블클릭합니다 2. FE1, FE4 LED가깜박입니다. 3. 1~4번중선택합니다. 4. 1번->F5번 2번->F6번 3번->F7번 4번->F8번으로선택됩니다. 5. 선택한 Function Number(FE1~FE4)LED가깜박이며설정이됩니다. 1. 각모드선택시전면의 FE1~FE4 LED 가 ON 됩니다. 2. 리모컨사용시에는 F 키를누르고 F1~F8 Mode 중에서선택합니다. 17
HDMI Splitter 고장신고전확인사항 (Splitter Trouble Shooting Guide) - 서비스를의뢰하기전에아래내용을확인부탁드립니다. 상태 : TV 화면이보이지않거나, TV 화면이깜박일때 확인사항 조치사항 제품과 HDMI Cable 이 연결되어있습니까? 1) Cable 을재연결하세요. 2) Cable 을교체하여연결하세요. 제품앞면에 POWER, SYNC, HDCP, INPUT, FE LED LED 불이꺼져있거나, 깜박입니까? 1) 전원어뎁터가연결되어있는지확인하세요. 2) 제품전면에있는 Power 버튼을눌러주세요. 3) AC전원이연결되었는지확인하세요. 4) 아답터를교체하세요. 당사가지급한어뎁터입 니까? 1) 당사가지급한어뎁터만사용하세요. 영상소스장비 (Generator Blu-Ray) 가켜져있습니까? 1) 영상소스장비 (Generator, Blu-Ray) 와 TV 을직접연 결하여정상동작하는지확인하세요. Input 번호가정확하게선택되어있습니까? UHD, FHD, HDTV 을혼합하여데모하고계십니까? 1) 소스영상이 1개라면 Input1 에연결하세요. 2) 소스영상이 Input2 에연결할경우, Input2 버튼을강제선택하세요. 1) EDID Emulation Mode에서 F1을사용하거나아니면정해진해상도를선택하세요. (Static Mode 참고 ) Splitter 제품에 TV 의추가연결또는연결제거시, EDID 초기화로인해 TV 화면에서깜 박임발생후동작합니다. ( 깜박임이발생하여도정상동작임 ) 18
User s Manual 제품규격 입력 (Input) 2 조 (Model: HVS-6204 / HVS-6208) 출력 (Output) 4 조 (Model: HVS-6204), / 8 조 (Model: HVS-6208) 사용자 인터페이스 (User Interface) 리모컨 RS232 LED 표시등버튼 (Buttons) IR Remote PC/ Device POWER ( 전원 ) : On / Off 표시 SYNC : 입력신호유무표시 HDCP : 입력의 HDCP 사용유무표시 EDID : EDID Emulation 사용유무상태표시 HDR : 출력의 HDR Infoframe 의유무표시 Input : Input 선택상태표시터치센서사용전원 (POWER) 입력 / 기능 (1 ~ 2) 선택가능기능 (F) 선택후 1~4로가능 전원 +12V 3A DC Jack Firmware Upgrade 지원 USB memory stick (FAT32) HDMI Version 2.0a 지원 Up to 4096 x 2160p @ 60Hz (YCbCr / RGB 4:4:4) Up to 18Gbps (6Gbps per channel) HDCP Version 2.2/1.4 지원 HDCP 2.2 / 1.4 지원 EDID Emulation EDID Emulation mode 지원 (Dynamic mode 4 종 / Static mode 4 종 ) 19
HDMI Splitter 20