Microsoft Word - Splitter HDMI 200s Manual-아시아권_

Size: px

Start display at page:

Download "Microsoft Word - Splitter HDMI 200s Manual-아시아권_"

호정 진
6 years ago
Views:

Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.

2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ClassⅠ construction An apparatus with CLASSⅠ construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 3

Disconnection Device Disconnect the main plug from the apparatus, if it s defected. And please call a repair man in your location. When used outside of the U.S.

4 Disconnection Device Disconnect the main plug from the apparatus, if it s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on the apparatus. DigitalZone will not be responsible for any problems caused by using any other adopter we don't provide. Where the MAIN plug or an appliance coupler is used as the disconnect device, The disconnect device shall remain readily operable. 4

User s Manual FCC Information (for U.S.A) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

5 User s Manual FCC Information (for U.S.A) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment under FCC rules. NOTE ON RECYCLING (for EUROPE) This product s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste. This product and the accessories packed together constitute the applicable product according to the WEEE directive except batteries 5

6 NEXD HDMI Splitter 안전을위한주의사항 신체적위험이나재산상의피해를막기위한내용으로반드시지켜주시기바랍니다. 평평한곳에설치해주세요. 햇빛이직접비치거나추운곳에서사용하지마세요. 먼지나물등이들어가지않도록하세요. 분해하거나수리, 개조하지마세요. 제품위에물컵등을얹어놓지마세요. 진동이심한곳이나자석류가있는곳에서멀리놓아주세요. 통풍이잘되는곳에놓아주세요. 제품위에물건을올려놓지마세요. Copyright 2011, 디지털존. All rights reserved. - 사용설명서의내용중일부또는전부를무단복제하는것은금지되어있습니다. - 제품의사양은기능향상을위하여예고없이변경될수있습니다. - 디지털존로고와 NEXD 는 디지털존의등록상표입니다. - 기타명칭이나상표는각소유자의등록상표입니다. - 이기기는업무용 (A 급 ) 으로전자파적합등록을한기기이오니판매자또는사용자는이점을주의하시기바라며, 가정외의지역에서사용하는것을목적으로합니다. - A/S 접수 :

7 User s Manual Contents 안전을위한주의사항 6 목차 7 각부분의이름 8 제품구성물 9 리모컨버튼의이름과기능 10 리모컨건전지삽입하기 10 연결하기 11 NEXD HDMI Splitter 사용법 12 문제해결하기 12 CEC, USB ( 펌웨어업그레이드 ) & RS-232 ( 외부컨트롤 ) 13 EDID Emulation Mode 선택방법 Dynamic mode Static mode 14 고장신고전확인사항 15 제품규격 16 Important Safety Instruction 18 Control & Connection options 19 Packages and accessories 20 Remote control Unit 21 Insert battery 21 Connection 22 How to use NEXD HDMI Splitter 23 Troubleshooting for no power 23 CEC, USB (Firmware upgrade) & RS-232 (Remote Control) 23 How to use EDID Emulation Mode 24 Dynamic mode 24 Static mode 24 Troubleshooting Guide for Splitters 25 Specification 26 Troubleshooting for no power 26 Chinese 27 Japanese 34 7

8 NEXD HDMI Splitter 각부분의이름 앞면 뒷면 (208L) 뒷면 (204L) 8

9 User s Manual 제품구성물 사용전에내용물이빠짐없이들어있는지확인하세요. 제품구성은사전에공지없이변경될수있습니다. 당사에서제공하는아답터를반드시사용하시기바랍니다. 다른아답터를사용하여발생되는문제점에대해서는당사가책임을지지않습니다. 이기기는업무용 (A 급 ) 으로전자파적합등록을한기기이오니판매자또는사용자는이점을주의하시기바라며, 가정외의지역에서사용하는것을목적으로합니다. 구성물이외에추가물품은별도로구매하시려면제조사또는구매처에문의하시기바랍니다. ( 전화 ) 9

10 NEXD HDMI Splitter 리모컨버튼의이름과기능 ( 옵션 ) 리모컨은본체에서 3~5M 거리에좌우상하 60 도에서작동합니다 본체와리모컨의거리가멀거나다른물체에가려사용이불가능할경우외부리모컨수신부를이용하여작동시킬수있습니다. - 외부리모컨수신부 삽입전에는본체의전원을꺼주세요. 리모컨건전지삽입하기 1. 건전지삽입부를당겨뺍니다. 2. "+" 극이위로향하게삽입하세요. 3. 삽입부를밀어 넣으세요. 10

11 User s Manual 연결하기 HDMI 케이블로연결하는방법입니다. (ex. 입력 : Blu-ray Player, HD Stream Generator, 출력 : PDP, LCD TV) 1080p/50~60Hz 이상의해상도, 720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz(High Refresh Rate) 를지원하기위해서는 High speed HDMI Cable(Version 1.3) 을반드시사용하시기바랍니다. 영상의분배를위해별도의케이블이필요하시면제조사또는구매처에문의하시기바랍니다. 11

12 NEXD HDMI Splitter NEXD HDMI Splitter 사용법 1. NEXD Splitter 의전원스위치를켭니다. 2. 사용하려는영상입력기기 (Blu-ray Player or HD Set-top box, etc.) 의전원을켭니다. 3. 디스플레이기기 (LCD TV, PDP TV etc) 의전원을켭니다. 4. 사용하려는영상출력기기와연결된입력번호를선택합니다. NEXD HDMI Splitter 전면부의 Input1~Input2 버튼을누르면됩니다. HD(1080p) 급의고화질영상출력장비 (Blu-ray Player, HD set-top box) 를연결하여사용하는경우 Output 단자와연결된디스플레이기기는 HD 급고화질 TV 의 HD 급입력단자이어야합니다. 문제해결하기 1. NEXD HDMI 전면부의 LED 가켜져있는지확인하시기바랍니다. 2. NEXD HDMI 와연결된기기들의전원케이블이제대로연결되어있는지확인합니다. 좀더자세한사항은 에서확인하시기바랍니다. 12

13 CEC, USB ( 펌웨어업그레이드 ) & RS-232 ( 외부컨트롤 ) 1. CEC : CEC 기능의자세한사항은 에서확인하시기바랍니다. 2. USB : 펌웨어업그레이드가있다면, USB 를통하여손쉽게업그레이드가가능합니다. 3. RS-232 : 당사의컨트롤프로토콜이제공하는시리얼포트를통해외부컨트롤이가능합니다. User s Manual SDK 는당사홈페이지 을통해출시될예정입니다. 다운로드와사용법에대한좀더자세한정보를원하시면 을확인해주시기바랍니다. EDID Emulation Mode 선택방법 1. Dynamic mode Function Number Mode Summary Description F1 Normal Safety configuration 모든출력장치의교집합을취함 F2 Copy 1st HDMI Port 첫번째출력장치의 EDID 를사용함 설정방법 1. 전면부의 F키를 2초이상누릅니다. 2. 기존에설정된모드가깜박인후 input1~2까지전체가깜박입니다. 3.1~2번중선택합니다. 4.1번->F1번 2번->F2번 Mode로선택됩니다. 5. 선택한 Function Number(input1~input2)LED가깜박이며설정이됩니다. 13

14 NEXD HDMI Splitter 2. Static mode Function Number Mode Summary Description F3 1080i Force 1080i F4 1080p Force 1080p Audio : 2Ch, PCM Video : 1080i/50,60Hz Audio : 2Ch, PCM Video : 1080p/50,60Hz 설정방법 1. 전면부의 F키를더블클릭합니다 2. 기존에설정된모드가깜박인후 input1~2까지전체가깜박입니다. 3.1~2번중선택합니다. 4.1번->F3번 2번->F4번으로선택됩니다. 5. 선택한 Function Number(input1~input2)LED가깜박이며설정이됩니다. 1. F1 이외의모드선택시전면의 EE LED 가 On 됩니다. 2. 리모컨사용시에는 F 키를누르고 F1~F4 Mode 중에서선택합니다. 14

15 User s Manual 고장신고전확인사항 (Splitter Trouble Shooting Guide) - 서비스를의뢰하기전에아래내용을확인부탁드립니다. 상태 : TV 화면이보이지않거나, TV 화면이깜박일때. 확인사항 조치사항 제품과 HDMI Cable이연결되어있습니까? 1) Cable을재연결하세요. 2) Cable을교체하여연결하세요. 제품앞면에 POWER, SYNC, DVI/HDMI, INPUT, EE LED LED 불이꺼져있거나, 깜박입니까? 1) 전원아답터가연결되어있는지확인하세요. 2) 제품전면에있는 Power 버튼을눌러주세요. 3) AC전원이연결되었는지확인하세요. 4) 아답터를교체하세요. 당사가지급한아답터입니까? 1) 당사가지급한아답터만사용하세요. 영상소스장비 (Generator Blu-Ray) 가켜져있습니까? Input 번호가정확하게선택되어있습니까? 1) 영상소스장비 (Generator, Blu-Ray) 와 TV을직접연결하여정상동작하는지확인하세요. 1) 소스영상이 1개라면 Input1 에연결하세요. 2) 소스영상이 Input2 에연결할경우,,Input2 버튼을강제선택하세요. Full HD TV, HD TV을혼합하여데모하고계십니까? 1) 소스장비 (Generator, Blu-ray) 의해상도를낮춰주세요. 2) Splitter 장비의 F Mode를 F1 로변경해주세요. Spliiter 제품에 TV의추가연결또는연결제거시, EDID 초기화로인해 TV화면에서깜박임발생후동작합니다.( 깜박임이발생하여도정상동작임 ) 15

16 NEXD HDMI Splitter 제품규격 입력 (Input) 2조 HDMI Type A 출력 (Output) 8조 Default (Model: HDMI 208L) 4조 Optional (Model: HDMI 204L) 사용자 인터페이스 (User Interface) 리모컨 IR ( 옵션 ) RS232 Remote PC/ Device LED 표시등 POWER ( 전원 ) : On / Off 표시 SYNC : 입력신호유무표시 HDMI : HDMI 혹은 DVI 입력신호유무표시 HDCP : HDCP 사용유무표시 EE : EDID Emulation 사용유무표시 버튼 (Buttons) 터치센서사용전원 (POWER) 전원 +12V/ 3A DC Jack 입력 (Input 1 ~ input 2) 선택가능기능 (F1~F4) 선택가능 Firmware Upgrade 지원 Mini-USB B type connector HDMI Version 1.3 지원 Deep Color Higher refresh rate (~120hz) Colorimetry RGB / YCbCr / xvycc CEC 지원 Auto switching ( 자동입력소스선택기능 ) EDID Emulation EDID Emulation mode supporting 16

17 User s Manual English 17

18 NEXD HDMI Splitter Important Safety Instructions Please read following recommended safety instructions carefully. Do not place this product on an uneven surface. Do not install on a surface where exposed to direct sunlight, near heating.equipment or heavy cold area. Prevent water or dust from the product. Do not attempt to repair this product yourself. Do not place glass contained of liquid on the product. Do not install this product near any magnetic source. Place the product at proper ventilation Do not place heavy items on the product. area. 18 Copyright 2011, DigitalZone Co., Ltd. All rights reserved. Read these operating instructions carefully before using the product. Follow the safety instructions on the unit and the safety precautions listed in the manual. Keep this manual handy for future reference.

19 User s Manual Controls & Connection Options Front Rear (208L) Rear (204L) 19

20 NEXD HDMI Splitter. Packages and accessories Contents are subject to change without prior notice. Distributors and users should keep in mind that the device is for commercial use (Grade A), which acquired EMC (Electronicmagnetic Capability), and it is intended to be used in areas, except for a domestic purpose. DigitalZone will not be responsible for any problems caused by using any other adopter we don't provide. Additional accessories should be purchased separately. HDMI cable is optional accessories. 20

21 Remote Control Unit User s Manual It s possible to use a remote controller within 3~5m, 60 degree of angle scope. You can use an extension receiver for a remote controller if it s far away from the system. The receiver in the system will not work when the extension reciever is connected. - Turn the unit off before connecting the extension reciever. Insert battery 1. Pull out the insert part. 2. Insert battery after checking. 3. Push in the insert part. + polarity 21

22 NEXD HDMI Splitter Connection How to connect devices with splitter (- Input: Blu-ray Player, HD Stream Generator -Output: PDP, LCD TV) You must use High Speed HDMI cable supporting HDMI 1.3 if you like to use Deep Color, High refresh rate and resolution above 1080p50~60hz. (720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz High Refresh Rate) Please ask manufacturer or store you purchased, if you need additional HDMI cables for more connection. 22

23 User s Manual How to use NEXD HDMI Splitter 1. Power ON NEXD HDMI splitter. 2. Power on source players to use such as Blu-ray Player or HD Set-top box, etc 3. Power on display devices 4. Choose one of the input no. for the source player to use. It s possible to select the input number by touching the number button in the front panel or by pressing the button in the remote control unit. You must connect Full HD TV to use HD player supporting 1080p ( Blu-ray player, HD set top box) Troubleshooting for no power - Check if LED light on the front is turned on. - Make sure the power cord connectors on both ends are firmly attached. Please refer to the webpage, for more detailed information for the troubleshooting CEC, USB (Firmware upgrade) & RS-232 (Remote Control) 1. CEC : Refer to the webpage, for the information of CEC function. 2. USB : You can upgrade firmware by USB easily when new firmware is released. 3. RS-232 : RS-232 is capable of external control via serial port provided control protocol by DigitalZone. 4. Remark: The SDK will be released in Please check more detailed information in regarding download and how to use. 23

24 NEXD HDMI Splitter How to use EDID Emulation Mode 1. Dynamic mode Function Number Mode Summary Description F1 Normal Safety configuration F2 Copy 1st HDMI Port Intersection of all those display devices Follow EDID information of the display device connected 1 st HDMI output. How to set Dynamic mode. 1. Keep touching F key on front over 2sec. 2. All LEDs of input1~2 are blinking after pre-registered mode LED blinking. 3. Select No. 1~2. 4. No.1->F1 No.2->F2 5. Selected LED function Number (input1~input2) is blinking and be set.. 2. Static mode Function Number Mode Summary Description F3 1080i Force 1080i Audio : 2Ch, PCM Video : 1080i/50,60Hz F4 1080p Force 1080p Audio : 2Ch, PCM Video : 1080p/50,60Hz How to set Static mode. 1. Double-click F key. 2. All LEDs of input1~2 are blinking after pre-registered mode LED blinking. 3. Select No. 1~2. 4. No.1->F3 No.2->F4 5. Selected LED function Number (input1~input2) is blinking and be set.. - When above functions are selected, EE LED will be ON except F1. - In case of using remote control, select F1~F4 after pressing "F" key. 24

25 User s Manual Troubleshooting Guide for Splitters - Please check the following before contacting the Customer Center for service. Status: When the TV screen does not show anything or is blinking Check List Is the product connected to the HDMI Cable properly? Is the LED for POWER, SYNC, DVI/HDMI, INPUT, EE LED on the front blinking or off? Measures 1) Connect the product to the cable correctly. 2) Replace the cable and connect the new one. 1) Check if the power adapter is connected properly. 2) Press the Power button on the front. 3) Check if the AC power is connected properly. 4) Replace the adapter. Is the adapter enclosed with the product supplied by DIGITALZONE? Are the video source equipments (Generator and Blu-Ray) turned on? 1) Use an adapter supplied by DIGITALZONE only. 1) Directly connect the video source equipments (Generator and Blu-Ray) to the TV to see if they work normally. Has the Input number been selected properly? 1) Select Input1 for one video source. 2) If Input2 is selected, press the Input2 button on the front. Are you displaying the Full HD TV and the HD TV together? 1) Please change the resolution of source player(hd stream generator or Blu-ray player) to lower resolution. 2) Please change F Mode of HDMI splitter to F1. When additionally connecting or removing a TV to or from a splitter, the TV screen may blink for a few seconds and then become normal due to the initialization of EDID. (This is not an error but a normal operation.) 25

26 NEXD HDMI Splitter Specification Input 2EA HDMI Type A 8EA Default (Model: HDMI 208L) Output 4EA Optional (Model: HDMI 204L) Remote Control IR (Option) RS232 Remote PC/ Device User Interface LED POWER : On / Off SYNC : Indication of valid input signal HDMI: Input signal is HDMI or DVI HDCP: HDCP being used EE : EDID Emulation being used. Touch sensors Buttons POWER Selectable Input 1 ~ input 2 Selectable function F1~F4 Power +12V/ 3A DC Jack Firmware Upgrade Yes Mini-USB B type connector HDMI Version 1.3 Deep Color Higher refresh rate (~120hz) Colorimetry RGB / YCbCr / xvycc CEC Yes Auto switching EDID Emulation EDID Emulation mode supporting Troubleshooting for no power - Check if LED light on the front is turned on. - Make sure the power cord connectors on both ends are firmly attached. Please refer to the webpage, for more detailed information for the troubleshooting 26

27 User s Manual Chinese 27

28 NEXD HDMI Splitter NEXD HDMI 分配器手册 1. 跟 NEXD HDMI 和播放器和电视用 HDMI 线连接 2. 开电视 3. 开 NEXD NEXD HDMI Splitter. 4. 开播放器例如 Blu-ray 播放器 HD 机顶盒. 5. 选择输入端子号码为了选择输入号码按遥控器的输入号码或前面触屏钮注意 : 为了连接 1080p 播放器得跟 Full HD 电视连接为了用 Deep Color( 沈颜色 ) 及高 Refresh Rate 及高分辨率得 1080p50~60hz 跟高速 HDMI 1.3 线连接 (720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz High Refresh Rate) 解决问题 1. 请确认 NEXD HDMI 前端的 LED 是否打开 ; 2. 请确认连接于 NEXD HDMI 的机器的电源线是否连接正确欲了解更多详情, 请在进行确认 CEC, USB ( 固定软件升级 ) & RS-232 ( 遥远控制 ) 1. CEC : 在参考. 2. USB : 有新固定软件用 USB 升级 3. RS-232 : 跟 DigitalZone 提供议定命令语用 RS-232 遥远控制参考 : 新固定软件及 RS-232 议定命令语在下载 28

29 EDID Emulation Mode 的选择方法 1. Dynamic mode Function Number Mode Summary Description User s Manual F1 Normal Safety configuration 选择所有输出设备的交集 F2 Copy 1st HDMI Port 使用第一个输出设备的 EDID 设置方法 1. 前端的 F 键按下 2 秒以上 ; 2. 现有已设定模块闪烁以后, 直到 input1~2 全部闪烁 ; 3. 从 1~2 键中进行选择 ; 4. 依次选择 1 键 ->F1 键 2 键 ->F2 键 5. 所选 Function Number(input1~input2)LED 闪烁, 设置到位 29

30 NEXD HDMI Splitter 2. Static mode Function Number Mode Summary Description F3 1080i Force 1080i F4 1080p Force 1080p Audio : 2Ch, PCM Video : 1080i/50,60Hz Audio : 2Ch, PCM Video : 1080p/50,60Hz How to set Static mode. 1. 双击前端的 F 键 ; 2. 现有已设定模块闪烁以后, 直到 input1~2 全部闪烁 ; 3. 从 1~2 键中进行选择 ; 4. 依次选择 1 键 ->F3 键 2 键 ->F4 键 5. 所选 Function Number(input1~input2)LED 闪烁, 设置到位 1. 选择 F1 以外模块时, 前端的 EE LED 会打开 ; 2. 使用遥控器时, 通过按 F 键从 F1~F4 Mode 中进行选择经销商和用户应牢记该设备用于商业用途 (A 级 ),EMC 公司收购了 (Electronicmagnetic 能力 ), 并打算将用于地区, 除了国内的目的 30

31 User s Manual 例如 : 连接 (- 输入 : Blu-Ray Player, HD Stream Generator - 输出 : PDP, LCD TV) 31

32 NEXD HDMI Splitter 问题. 对策 ( 分流器故障分析指南 ) - 顾客朋友, 在您申请服务之前, 请先阅读以下须知事项状态 :TV 画面不能显示或者不停闪动时确认事项解决对策请确认产品和 HDMI Cable(HDMI 线材 ) 是否连接完好请确认产品前方显示 POWER, SYNC, DVI/HDMI, INPU T, EE LED( 电源, 同步,DVI/HDMI, 输入,EE LED) 的 LED 灯是否关着, 或者是否在闪烁 1) 请将电线正确地再连接一次 2) 换一根电线, 重新连接一次 1) 请确认电源适配器是否连接完好 2) 请按一下产品前面的电源按钮 3) 请确认 AC 电源是否连接完好 4) 请换一个新的适配器请确认是不是我司配套提供的指定适配器 1) 请务必使用我司提供的适配器请确认影像设备 ( 发电机, 蓝光 ) 是否有打开? 是否正确选择了 Input 号码? 1) 画像输入设备 ( 发电机, 蓝光 ) 是否有和 TV 直接连接好并正常工作 1) 影像源如果只有 1 个, 请和 Input1 连接 2) 若影像源是和 Input2 连接, 那么请选择前台上的 Input2 1) 请改变源播放器 ( 高清流发生器或蓝光播放机 ) 分辨是否同时选择了 Full HD TV 和 HD T 率较低的分辨率 V? 2) 请更改 HDMI 分配器 F 模式为 F1 键在 Splitter( 分流器 ) 产品上和电视附加连接或者切断连接时, 由于 EDID( 扩展显示标识数据 ) 的初始化, 电视画面在出现几秒的闪烁之后会重新恢复正常 ( 闪烁的发生是很正常的现象 ) 32

33 User s Manual NEXD HDMI Splitter 规格 Input 2EA HDMI Type A Output 8EA Default (Model: HDMI 208L) 4EA Optional (Model: HDMI 204L) User Interface Remote Control IR RS232 LED Remote PC/ Device POWER : On / Off SYNC : Indication of valid input signal HDMI: Input signal is HDMI or DVI HDCP: HDCP being used. EE : EDID Emulation 表示是否使用 Buttons Touch sensors POWER 可以选择输入 (Input 1 ~ input 2) 可以选择功能 (F1~F4) Power +12V/ 3A DC Jack Firmware Upgrade Yes Mini-USB B type connector HDMI Version 1.3 Deep Color Higher refresh rate (~120hz) Colorimetry RGB / YCbCr / xvycc CEC Yes Auto switching EDID Emulation EDID Emulation mode supporting 33

34 NEXD HDMI Splitter Japanese 34

35 NEXD HDMI Splitter 使用方法 User s Manual 1. NEXD HDMI 電源スイッチをつけます 2. 使用したい映像入力機器 (Blu-ray Player or HD Set-top box, etc.) の電源をつけます 3. ディスプレイ機器 (TV or Plasma TV, etc.) の電源をつけます 4. 使用したい映像出力機器と接続されている入力番号を選択します NEXD HDMI 前面部の Input1~Input2 ボタンを押します HD(1080p) 用の高画質映像出力機器 (Blu-ray Player, HD set top boxes) を接続して使用する場合出力端子に接続されたディスプレイ機器は HD 用高画質テレビの HD 用入力端子でなければなりません問題解決 1. NEXD HDMI 前面部の LED がつけてあるかどうかご確認ください 2. NEXD HDMI に接続されている機器の電源ケーブルが正しく接続されているかどうかをご確認ください詳しくはでご確認ください CEC USB( ファームウェアアップグレード ) &RS-232( 外部コントロール ) 1. CEC : CEC 機能の詳細はでご確認ください 2. USB : ファームウェアがリリースされると USB を使って簡単にアップグレードできます 3. RS-232 : 本社のコントロールプロトコルが提供するシリアルポートを通し外部コントロールができます SDK は本社のホームページを通してリリースされる予定ですダウンロードと使用方法につきましての詳細はをご確認ください 35

36 NEXD HDMI Splitter EDID Emulation Mode 選択方法 1. Dynamic mode Function Number Mode Summary Description F1 Normal Safety configuration すべての出力装置の共通集合を取る F2 Copy 1st HDMI Port 1 番目出力装置の EDID を使う設定方法 1. 前面部のFキーを2 秒以上押します 2. 既存に設定されたモードがちらついた後 input1~2まで全体がちらつきます 3.1~2 番の中で選択します 4.1 番 ->F1 番 2 番 ->F2 番番に選択されます 5. 選択したFunction Number(input1~input2)LEDがちらついて設定されます 36

37 User s Manual 2. Static mode Function Number Mode Summary Description F3 1080i Force 1080i F4 1080p Force 1080p Audio : 2Ch, PCM Video : 1080i/50,60Hz Audio : 2Ch, PCM Video : 1080p/50,60Hz 設定方法 1. 前面部のFキーをダブルクリックします 2. 既存に設定されたモードがちらついた後 input1~2まで全体がちらつきます 3.1~2 番の中で選択します 4.1 番 ->F3 番 2 番 ->F4 番番に選択されます 5. 選択したFunction Number(input1~input2)LEDがちらついて設定されます 1. F1 以外のモード選択時に前面の EE LED がオンになります 2. リモコン使用時には F キーを押し F1~F4 Mode の中で選択します代理店ユーザはデバイスが商業用されていることを覚えておいてください (A グレード ) が買収の EMC(Electronicmagnetic 機能 ) およびそれが国内の目的以外に地域で使用されることを意図しています 37

38 NEXD HDMI Splitter 接続 HDMI ケーブルで接続する方法です (ex 入力 : Blu-ray Player, HD Stream Generator 出力: PDP, LCD TV) 1080p/50~60Hz 以上の解像度 720p/1080i/50~60Hz/Deep Color 720p/1080i/1080p/100~120Hz(High Refresh Rate) を支援するためには High Speed HDMI ケーブルを必ずお使いください映像の分配のために別のケーブルが必要であれば製造メーカーまたは購入先までお問い合わせください 38

39 問題解決 (Splitter Trouble Shooting Guide) サービス依頼の前に次の内容を必ずご確認ください状態 : テレビ画面が見えない場合やテレビ画面が点滅する場合 User s Manual 確認事項製品が HDMI Cable に接続されていますか? 措置事項 1) Cable をもう一度正しく接続してください 2) Cable を交換して接続してください製品の前面の POWER,SYN C,DVI/HDMI,INPUT,EE LE D の LED ライトが消えていたり点滅していますか? 1) 電源アダプタが接続されているか確認してください 2) 製品の前面にある Power ボタンを押してください 3) AC 電源が接続されているか確認してください 4) アダプタを交換してください付属のアダプタですか? 1) 付属のアダプタを使用してください画像ソース装置 (Generato, Blu-Ray) がオンになっていますか? Input 番号が正確に選択されていますか? 1) 画像ソース装置 (Generator,Blu-Ray) とテレビを直接接続して正常に動作するか確認してください 1) ソース画像が 1 つの場合は Input1 に接続してください 2) ソース画像が Input2 に接続されている場合はフロントの Input2 ボタンを選択してください Full HD TV HD TV を混合して展示していますか? 1) 低解像度のソースプレーヤー (HD ストリームジェネレータまたは Blu - ray プレーヤー ) の解像度を変更してください 2)"F1" キーに HDMI スプリッタの変化 F モードしてください Splitter 製品にテレビを追加接続したりテレビの接続を除去すると EDID 初期化によりテレビ画面が数秒間点滅して正常に戻ります ( 点滅しても正常動作です ) 39

40 NEXD HDMI Splitter 製品規格入力 (Input) 2 組 HDMI Type A 出力 (Output) 8 組 Default (Model: HDMI 208L) 4 組 Optional (Model: HDMI 204L) ユーザーインターフェース (User Interface) リモコン RS232 LED 表示灯ボタン (Buttons) IR Remote PC/ Device POWER ( 電源 ) : On / Off 表示 SYNC : 入力信号有無表示 HDMI : HDMIまたは DVI 入力信号有無表示 HDCP : HDCP 使用有無表示 EE : EDID Emulation 使用有無表示タッチセンサー使用電源 (POWER) 入力 (Input 1 ~ input 2) 選択機能可能機能 (F1~F4) 選択可能電源 +12V/ 3A DC Jack Firmware Upgrade 支援 Mini-USB B type connector HDMI Version 1.3 支援 Deep Color Higher refresh rate (~120hz) Colorimetry RGB / YCbCr / xvycc CEC 支援 Auto switching ( 自動入力ソース選択可能 ) EDID Emulation EDID Emulation mode supporting 40

Important Safety Instructions

HDR l HDMI Splitter 사용자매뉴얼 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water.