Contents 1. Product Code Information Characteristics Typical Characteristics Graph

Size: px

Start display at page:

Download "Contents 1. Product Code Information ----------------------- 3 2. Characteristics ----------------------- 10 3. Typical Characteristics Graph --------"

윤재 서
8 years ago
Views:

1 Rev: 8.0 Product Family Data Sheet LM561B Middle Power LED Introduction Features Beam Angle: 120 Precondition : JEDEC Level 2a Dimension : 5.6 x 3.0 x 0.8 mm ESD withstand Voltage : up to ± 5KV [HBM] SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do , KOREA 1 / 48

2 Contents 1. Product Code Information Characteristics Typical Characteristics Graph Outline Drawing & Dimension Reliability Test Items & Conditions Solder Conditions Tape & Reel Label Structure Packing Structure Precaution For Use Hazard Substance Analysis Report Revision History / 48

Reliability Test Items & Conditions ----------------------- 18 6. Solder Conditions ----------------------- 19 7. Tape & Reel ----------------------- 20 8.

3 1. Product Code Information 1) Luminous Flux Bins (T s = 25 ) Nominal CCT Product Code Flux Rank Sorting Condition Flux Range (Φv, lm) SPMWH 541MD5WAW S1 S ~ K SPMWH 541MD5WAW S2 S ~ 28.0 SPMWH 541MD5WAW S3 S ~ 30.0 SPMWH 541MD5WAV S1 S ~ K SPMWH 541MD5WAV S2 S ~ 28.5 SPMWH 541MD5WAV S3 S ~ 30.5 SPMWH 541MD5WAU S1 S ~ K SPMWH 541MD5WAU S2 S ~ 29.0 SPMWH 541MD5WAU S3 S ~ 31.0 SPMWH 541MD5WAT S1 S ~ K SPMWH 541MD5WAT S2 S ~ 30.0 SPMWH 541MD5WAT S3 S ~ 32.0 SPMWH 541MD5WAR S1 S ~ K SPMWH 541MD5WAR S2 S ~ 31.0 SPMWH 541MD5WAR S3 S ~ 33.0 SPMWH 541MD5WAQ S1 S ~ K SPMWH 541MD5WAQ S2 S ~ 30.5 SPMWH 541MD5WAQ S3 S ~ 32.5 SPMWH 541MD5WAP S1 S ~ K SPMWH 541MD5WAP S2 S ~ 30.0 SPMWH 541MD5WAP S3 S ~ 32.0 Notes: 1)SAMSUNG ELECTRONICS maintains a tolerance of ±5% on Luminous Flux measurements. 2)" " (the quantity of PKG on the Reel) can be "T"(2,500pcs) or "1"(10,000pcs). 3)Warm white : " " can be "0"(Whole Bin), "H"(Half Bin) or "M"(Quarter Bin) of the color binning. Cool white : " " can be "0"(Whole Bin) or "M"(Quarter Bin) of the color binning. 3 / 48

5 SPMWH 541MD5WAU S1 S1 25.0 ~ 27.0 3500K SPMWH 541MD5WAU S2 S2 27.0 ~ 29.0 SPMWH 541MD5WAU S3 S3 29.0 ~ 31.0 SPMWH 541MD5WAT S1 S1 26.0 ~ 28.0 4000K SPMWH 541MD5WAT S2 S2 28.0 ~ 30.

4 2) Color Bins (T s = 25 ) 1) Color Binning Nominal CCT Product Code Color Rank Chromaticity Bins SPMWH 541MD5WAW0S1 SPMWH 541MD5WAW0S2 SPMWH 541MD5WAW0S3 W0(Whole bin) W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG SPMWH 541MD5WAWHS1 2700K SPMWH 541MD5WAWHS2 WH(Half bin) W5, W6, W7, W8, W9, WA, WB, WC SPMWH 541MD5WAWHS3 SPMWH 541MD5WAWMS1 SPMWH 541MD5WAWMS2 WM(Quarter bin) W6, W7, WA, WB SPMWH 541MD5WAWMS3 SPMWH 541MD5WAV0S1 SPMWH 541MD5WAV0S2 SPMWH 541MD5WAV0S3 V0(Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG SPMWH 541MD5WAVHS1 3000K SPMWH 541MD5WAVHS2 VH(Half bin) V5, V6, V7, V8, V9, VA, VB, VC SPMWH 541MD5WAVHS3 SPMWH 541MD5WAVMS1 SPMWH 541MD5WAVMS2 VM(Quarter bin) V6, V7, VA, VB SPMWH 541MD5WAVMS3 SPMWH 541MD5WAU0S1 SPMWH 541MD5WAU0S2 SPMWH 541MD5WAU0S3 U0(Whole bin) U1, U2, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD, UE, UF, UG SPMWH 541MD5WAUHS1 3500K SPMWH 541MD5WAUHS2 UH(Half bin) U5, U6, U7, U8, U9, UA, UB, UC SPMWH 541MD5WAUHS3 SPMWH 541MD5WAUMS1 SPMWH 541MD5WAUMS2 UM(Quarter bin) U6, U7, UA, UB SPMWH 541MD5WAUMS3 4 / 48

WA, WB SPMWH 541MD5WAWMS3 SPMWH 541MD5WAV0S1 SPMWH 541MD5WAV0S2 SPMWH 541MD5WAV0S3 V0(Whole bin) V1, V2, V3, V4, V5, V6, V7, V8, V9, VA, VB, VC, VD, VE, VF, VG SPMWH 541MD5WAVHS1 3000K SPMWH

5 1) Color Binning (Continued) Nominal CCT Product Code Color Rank Chromaticity Bins SPMWH 541MD5WAT0S1 SPMWH 541MD5WAT0S2 SPMWH 541MD5WAT0S3 T0(Whole bin) T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG SPMWH 541MD5WATHS1 4000K SPMWH 541MD5WATHS2 TH(Half bin) T5, T6, T7, T8, T9, TA, TB, TC SPMWH 541MD5WATHS3 SPMWH 541MD5WATMS1 SPMWH 541MD5WATMS2 TM(Quarter bin) T6, T7, TA, TB SPMWH 541MD5WATMS3 5000K SPMWH 541MD5WAR0S1 SPMWH 541MD5WAR0S2 SPMWH 541MD5WAR0S3 SPMWH 541MD5WARMS1 SPMWH 541MD5WARMS2 R0(Whole bin) RM(Quarter bin) R1, R2, R3, R4, R5 R6, R7, R8, R9,RA R1, R2, R3, R4, R5, R6 SPMWH 541MD5WARMS3 5700K SPMWH 541MD5WAQ0S1 SPMWH 541MD5WAQ0S2 SPMWH 541MD5WAQ0S3 SPMWH 541MD5WAQMS1 SPMWH 541MD5WAQMS2 Q0(Whole bin) QM(Quarter bin) Q1, Q2, Q3, Q4, Q5 Q6, Q7, Q8, Q9, QA Q1, Q2, Q3, Q4, Q5, Q6 SPMWH 541MD5WAQMS3 6500K SPMWH 541MD5WAP0S1 SPMWH 541MD5WAP0S2 SPMWH 541MD5WAP0S3 SPMWH 541MD5WAPMS1 SPMWH 541MD5WAPMS2 P0(Whole bin) PM(Quarter bin) P1, P2, P3, P4, P5 P6, P7, P8, P9, PA P1, P2, P3, P4, P5, P6 SPMWH 541MD5WAPMS3 5 / 48

SPMWH 541MD5WATMS3 5000K SPMWH 541MD5WAR0S1 SPMWH 541MD5WAR0S2 SPMWH 541MD5WAR0S3 SPMWH 541MD5WARMS1 SPMWH 541MD5WARMS2 R0(Whole bin) RM(Quarter bin) R1, R2, R3, R4, R5 R6, R7, R8, R9,RA R1, R2, R3,

6 2) Chromaticity Region & Coordinates 6 / 48

7 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y W rank (2700K) W1 W2 W3 W4 W5 W6 W7 W W WA WB WC WD WE WF WG Region CIE X CIE Y Region CIE X CIE Y V rank (3000K) V1 V2 V3 V4 V5 V6 V7 V V VA VB VC VD VE VF VG / 48

4589 0.4021 0.4695 0.4207 0.4538 0.3931 0.4641 0.4112 0.4538 0.3931 0.4641 0.4112 0.4589 0.4021 0.4695 0.4207 WC 0.4646 0.4034 0.4756 0.4221 0.4593 0.3944 0.4700 0.4126 0.4418 0.3981 0.4513 0.4164 0.

8 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y U rank (3500K) U1 U2 U3 U4 U5 U6 U7 U U UA UB UC UD UE UF UG Region CIE X CIE Y Region CIE X CIE Y T rank (4000K) T1 T2 T3 T4 T5 T6 T7 T T TA TB TC TD TE TF TG / 48

4116 0.3865 0.4186 0.4037 0.4082 0.3782 0.4150 0.3950 0.4082 0.3782 0.4150 0.3950 0.4116 0.3865 0.4186 0.4037 UC 0.4183 0.3898 0.4259 0.4073 0.4147 0.3814 0.4221 0.3984 0.3915 0.3768 0.3968 0.3930 0.

9 2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y R rank (5000K) R1 R2 R3 R4 R5 Q1 Q2 Q3 Q4 Q R R R R RA Q rank (5700K) Q Q Q Q QA Region CIE X CIE Y Region CIE X CIE Y P rank (6500K) P1 P2 P3 P4 P P P P P PA Notes: SAMSUNG ELECTRONICS maintains ±0.005 tolerance of Cx, Cy 9 / 48

3396 R8 0.3456 0.3601 0.3515 0.3487 0.3373 0.3534 0.3441 0.3428 0.3449 0.3515 0.3376 0.3616 0.3527 0.3578 0.3464 0.3688 R9 0.3539 0.3669 0.3471 0.3775 0.3456 0.3601 0.3379 0.3698 0.3373 0.3534 0.3464 0.3688 0.

10 2. Characteristics 1) Absolute Maximum Rating Item Symbol Rating Condition Operating temperature range Top -40 ~ Storage temperature range Tstg -40 ~ LED junction temperature TJ Forward Current IF 180 ma - Peak Pulsed Forward Current IFP 300 ma Duty 1/10 pulse width 10ms Assembly Process Temperature - 260, < 10sec - ESD - 5kV HBM 2) Electro-optical Characteristics Item Forward Voltage 1) (V F) (@65 ma, Ts = 25 ) Luminous Flux 2) (Φ v) (@65 ma, Ts = 25 ) Unit Nominal CCT Product Code V - - WA lm 2700K (W ) 3000K (V ) 3500K (U ) 4000K (T ) 5000K (R ) 5700K (Q ) 6500K (P ) Rank Min Typ Max AZ A A A A *WAW S1 S *WAW S2 S *WAW S3 S *WAV S1 S *WAV S2 S *WAV S3 S *WAU S1 S *WAU S2 S *WAU S3 S *WAT S1 S *WAT S2 S *WAT S3 S *WAR S1 S *WAR S2 S *WAR S3 S *WAQ S1 S *WAQ S2 S *WAQ S3 S *WAP S1 S *WAP S2 S *WAP S3 S Reverse Voltage (@5 ma, Ts = 25 ) V Color Rendering Index 3) (R a) Special CRI 4) (R9) Thermal resistance (Rth, j-s) /W Notes: 1)~4) SAMSUNG ELECTRONICS maintains a tolerance of V F:±0.1 V, Φ v :±5 %, R a :±3.0, R9 :±6.5 on measurements 5) " * " is Product Code of "SPMWH 541MD5" 10 / 48

Forward Voltage 1) (V F) (@65 ma, Ts = 25 ) Luminous Flux 2) (Φ v) (@65 ma, Ts = 25 ) Unit Nominal CCT Product Code V - - WA lm 2700K (W ) 3000K (V ) 3500K (U ) 4000K (T ) 5000K (R ) 5700K (Q ) 6500K

11 3. Typical Characteristics Graph (T s = 25 ) 1) Spectrum Distribution [CCT : 2700K & 3000K] [CCT : 3500K & 4000K] 11 / 48

12 [CCT : 5000K & 5700K] [CCT : 6500K] 12 / 48

13 2) Forward Current Characteristics [Relative Luminous Flux vs. Forward Current] (T s = 25 ) [Forward Current vs. Forward Voltage] (T s = 25 ) 13 / 48

14 3) Temperature Characteristics [Relative Luminous Flux vs. Ts] (I F = 65mA) [Forward Voltage vs. Ts] (I F = 65mA) 14 / 48

15 4) Color shift Characteristics [Color Δx, Δy vs. Forward Current] (T s = 25 ) [Color Δx, Δy vs. Ts] (I F = 65mA) 15 / 48

16 5) Derating Curve 6) Beam Angle Characteristics 16 / 48

17 4. Outline Drawing & Dimension 1. Tolerance is ±0.10 mm 2. The maximum compressing force is 15N on the body a 3. Do not place pressure on the encapsulation resin b Left Side View Top View Bottom View Anode Mark a b Cathode Anode Front View Ts Recommended Land Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method 1 Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts point. 2 Thermal pad must be soldered to the PCB to dissipate heat properly. Otherwise, LED can be damaged. 3) Precautions 1 The pressure on the LEDs will influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the LEDs. Do not put stress on the LEDs during heating. 2 Re-soldering should not be done after the LEDs have been soldered. If re-soldering is unavoidable, LED`s characteristics should be carefully checked before and after such repair. 3 Do not stack assembled PCBs together. Since materials of LEDs is soft, abrasion between two PCB assembled with LED might cause catastrophic failure of the LEDs / 48

protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method 1 Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts point.

18 5. Reliability Test Items and Conditions 1) Test Items Test Item MSL Test Room Temperature life test High Temperature life test High Temperature humidity life test Low Temperature life test Powered Temperature Cycle test Thermal Shock High Temperature Storage Low Temperature Storage ESD(HBM) Test Conditions hrs drying 60, 60 %RH 120hrs sec 3 cycles Test Hours/Cycles Sample No 1 cycle ±3, DC180 ma 1,000 hrs ±3, DC180 ma 1,000 hrs ±3, 85 %±2 %RH, DC180 ma 1,000 hrs ±3, DC180 ma 1,000 hrs /20 min 85 /20 min, Sweep 100min cycle on/off: each 5 min, DC 180mA -45 /15 min 125 /15 min Hot plate cycle cycle 100 Ta=120 ± hrs 11 Ta=-40 ± hrs 11 R1:10 MΩ, R2:1.5 kω, C:100 pf, V = ±5 kv 5 times 5 ESD(MM) Vibration Test R1:10 MΩ, R2: 0, C:200 pf, V = ±0.5 kv 20~2000~20 Hz 200 m/s 2, Sweep 4 min X, Y, Z 3 direction, each 1 cycle 5 times 5 4 cycles 11 Mechanical Shock Test 1500G, 0.5 ms 5 cycles 11 2) Criteria for Judging the Damage Item Symbol Test Condition Min Limit Max Forward Voltage VF IF = 65 ma Init. Value*0.9 Init. Value*1.1 Luminous Flux Φ v IF = 65 ma Init. Value*0.7 Init. Value* / 48

cycle 11 25 ±3, DC180 ma 1,000 hrs 22 85 ±3, DC180 ma 1,000 hrs 22 85 ±3, 85 %±2 %RH, DC180 ma 1,000 hrs 22-40 ±3, DC180 ma 1,000 hrs 22-45 /20 min 85 /20 min, Sweep 100min cycle on/off: each 5 min,

19 6. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 300, under soldering iron / 48

2) For Manual Soldering Not more than 5 seconds

20 7. Tape & Reel 1) Taping Dimension (unit : mm) Anode Mark (Cutting side) Tapping Diretion End Start More than 500mm Unloaded tape Mounted with LED package More than 100~200mm Unloaded tape Leading part more than 500mm 20 / 48

Unloaded tape Mounted with LED package More than 100~200mm

21 2-1) Reel Dimension (max 2,500 pcs) 2-2) Reel Dimension (max 10,000 pcs) Symbol A B C W1 W2 Spec(mm) Ø330±1 80±1 13±0.5 13± ±1 (1) Quantity : The quantity/reel to be 2,500 pcs or 10,000 pcs,. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no. and quantity to be indicated on a damp proof Package / 48

22 8. Label Structure 1) Label Structure abcdef A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Rank Code N.B) Denoted rank is the only example. ' ' means All kind of Chromaticity Coordinate Rank. Rank Code ab : Forward Voltage(V F) Rank (refer to page. 11) cd : Chromaticity Coordinate Rank (refer to page. 4~10) ef : Luminous Flux(Φ v, lm) Rank (refer to page. 3) 2) LOT Number The Lot number is composed of the following characters A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII / 1abc / 2,500 PCS : Production Site (S:SAMSUNG ELECTRONICS, G:TIAJIN CHINA) : L (LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, S:Sample) : Year (Y:2014, Z:2015, A: ) 5 : Month (1 ~ 9, A, B, C) 6 : Day (1 ~ 9, A, B ~ V) 789 : SAMSUNG ELECTRONICS LED Product number (001 ~ 999) abc : Reel Number (001 ~ 999) 22 / 48

23 9. Packing Structure 1-1) Packing Process (The quantity of PKG on the Reel to be Max 2,500 pcs) Reel A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Material : Paper(SW3B(B)) TYPE SIZE(mm) L W H 7inch 245±5 220±5 182±5 7inch 245±5 220±5 86±5 1 SIDE A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 25,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII H CHIP LED L W / 48

24 1-2) Packing Process (The quantity of PKG on the Reel to be Max 10,000 pcs) Reel A1 1S1 SPMWH1541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A1 1S1 SPMWH1541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII A1 1S1 SPMWH1541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 150,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII [Box Label] Box SIZE(mm) L W H Inner 340±5 370±5 80±5 Outer 345±5 378±5 405± / 48

25 2) Aluminum Packing Bag A1 1S1 SPMWHT541MD5WA 0S1 A1 1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag 25 / 48

26 10. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기 위해 저항 등의 설치를 권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며, 세정이 필요할 시에는 IPA 사용을 권장함. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. LED의 발광 시, 동작 전류는 주변 최고온도를 고려하여 결정되어야 함. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung Electronics, they should be packed by a sealed container with nitrogen gas injected.(shelf life of sealed bags: 12 months, temp. ~40, ~90%RH) LED의 보관은 청정한 환경에서 보존되어져야 하며, 만약 삼성전자로부터 공급받는 후 3개월 또는 그 이상 보관이 필요하다면 질소 가스를 동봉한 보존용기에 보관되어야 함. (보존 bag의 수명 : 12 개월, 보존 온도 ~40, 습도 ~90%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: 보존 Bag이 개봉된 후에, 납땜이나 reflow등의 높은 온도에 노출되는 제품은 다음의 사항에 부합되어야 함. a. Mounted within 672 hours(28 days) at an assembly line with a condition of no more than 30 /60%RH, a. 제품은 30 /60%RH보다 같거나 낮은 조립조건에서 672시간(28일)이내에 조립해야 함. b. Stored at <10%RH. b. 10% 이하의 상대습도에서 보관되어야 함. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 사용하지 않은 제품은 방습팩에 넣어 개봉 부위를 닫아서 다시 포장한 후, 건조한 장소에서 보관할 것을 권장함 / 48

27 7) Devices require baking before mounting, if humidity card reading is >60% at 23±5. 만약 습도표시카드의 수치가 23±5 에서 60% 이상이라면, 제품 실장 전 baking해야 함. 8) Devices must be baked for 1 hour at 60±5, if baking is required. 만약 baking이 필요하다면, 제품은 60±5 에서 1시간 정도 baking 되어야 함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기 방지장갑이나 손목밴드를 사용하기를 권장함. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. 만약 절대 허용치를 초과하는 전압이 LED에 가해지면, LED 소자는 파괴되거나 손상될 수 있음. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 손상된 제품은 누설전류의 증가, Turn on 전압의 저하, 저 전류에서의 점등불량 등의 이상 거동을 보일 수 있음. 10) VOCs (volatile organic compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead a discoloration of encapsualnt when they expose to heat or light. VOCs(휘발성 유기 화합물)는 등기구에 사용되는 접착제, Flux, 경화제, 유기물 첨가제에서 발생하여 LED 실리콘 봉지제를 투과하고, 빛 또는 열에 노출되었을 때 변색이 발생 할 수 있음. This phenomenon can cause a significant loss of light emitted(output) from the luminaires(fixtures). 이러한 현상은 등기구로부터 나오는 빛의 중대한 손실을 줄 수 있음. In order to prevent these problems, we recommend you to know the physical properties of the materials used in luminaires, They must be selected carefully. 이러한 문제 발생 방지를 위해서, 등기구에 사용되는 자재에 대한 물성을 알고 주의하여 선택 되어야함 / 48

28 11) Risk of Sulfurization (or Tarnishing) The LED from Samsung Electronics uses a silver-plated lead frame and its surface color may change to black(or dark colored) when it is exposed to sulfur(s), chlorine (Cl) or other halogen compound. 삼성전자의 LED는 Ag(은)을 도금한 리드프레임을 사용함. 이 리드프레임의 표면이 황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로 바뀔 수 있음. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution. 리드 프레임의 황화(Sulfurization)는 광량 저하, 색좌표 변화 및 심한 경우 LED 무등(Open) 불량을 일으킬 수도 있으니 주의가 필요함. Due to possible sulfurization of lead frame, LED should not be used and stored together with oxidizing substances made of materials in a following list, : Rubber, plain paper, lead solder cream and so on. 리드 프레임 황화(Sulfurization)의 근원이 될 수 있으니 LED는 아래의 목록으로 만들어진 산화성 물질들과 함께 저장, 사용이 불가함 : 고무, 일반 종이, 납땜 크림 등 28 / 48

29 12. Hazard Substance Analysis 1) SVHC (Reach) Report 29 / 48

30 30 / 48

31 31 / 48

32 32 / 48

33 33 / 48

34 34 / 48

35 35 / 48

36 36 / 48

37 37 / 48

38 38 / 48

39 39 / 48

40 40 / 48

41 41 / 48

42 42 / 48

43 43 / 48

44 44 / 48

45 45 / 48

46 46 / 48

47 47 / 48

48 Revision History Date No. Revision History Drawn Writer Approved New version. W.H Jung Y.T KIM Add up Quarter and half of color binning. W.H Jung Y.T KIM ) Change of tapping Q'ty from 2,000 pcs to 2,500 pcs. 2) Change of CIE tolerance x,y:±0.005 C.H. KWON Y.T KIM Add up a mark of UL certification. W.H Jung Y.T KIM ) Add up ErP(Energy-related Products) of the Energy regulation. 2) Change of Graph on Color shift Characteristics W.H Jung Y.T KIM ) Deletes ErP(Energy-related Products) codes in the product data sheet. W.H Jung S.B Yun ) Update of SGS data. 2) Deletes UL mark of the label on the reel. 3) Add up a Small box W.H Jung S.B Yun Maximum Current upgade( mA) Y.J Cho J.K Park 48 / 48

Contents 1. Product Code Information Characteristics Typical Characteristics Graph

Contents 1. Product Code Information Characteristics Typical Characteristics Graph Rev: 003 Product Family Data Sheet LM561B - 5630 Middle Power LED Introduction Features Beam Angle: 120 Precondition : JEDEC Level 2a Dimension : 5.6 x 3.0 x 0.8 mm ESD withstand Voltage : up to ± 5KV