ALL MODE TRANSCEIVER i7000
R e r q... 1 w t y u i q w t y u i e r Icom, Icom Inc., logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United 52.76497 MHz, Kingdom, Germany, France, Spain, Russia and/or other 443.03535 MHz countries. i-1 OPEN THIS PAGEP
@4 @3 @2 @1 @0!9!8!7!6 q w e!5 t yu i o!0!1!2!4 r!3 HM-151 z x c v b SPCH /LOCK TUNER /CALL V/M F-1 1.8 1 3.5 2 7 3 10 4 14 5 18 6 21 7 24 8 28 9 XFC MW F-2 MODE FIL GENE 3 2 1. 0, m n Mic element 50 144 430. 0 CE F-INP ENT i-2
q z w x c e v r b t n y m, u. i 0 (pgs. 100, 114) 1 o (pgs. 27, 100, 107) (pgs. 5 8, 151) 2!0 (pgs. 65, 89)!1 3 (pgs. 80, 93) (pgs. 100, 114)!2!3!4!5!!7!8!9 @0 @1 @2 @3 (p. 72) @4 i-3
ii R R R R R R R
1 q w e [RF/SQL] (outer control; p. 35) r t [PBT/M-ch/RIT] SET MODE SELECTION MODE Auto SQL RF + SQL SSB, CW RTTY AM, FM WFM RF GAIN SQL SQL SQL RF + SQL RF + SQL See the illustration of the Front panel on page i-2. PBT1 PBT2 + High cut Center Low cut 1
1 y (pgs. 73, 77, 86, 100) RIT/ TX u (p. 104). 1 i TX RIT RIT M-ch Channel decreases M-ch Channel increases Frequency decreases RIT Frequency increases o See the illustration of the Front panel on page i-2. 2
1!0!5!6!1 [ANF/ REC] (p. 80)!2 Back of the front panel!!!8 [RX]:!4 [TX]: 3 See the illustration of the Front panel on page i-2.
1!9 @2 @3 (p. 72) @4 [MODE] (p. 34) USB/LSB CW/CW-R RTTY/RTTY-R AM/FM/WFM USB LSB CW CW-R RTTY RTTY-R AM FM WFM AM, etc @0 USB LSB CW CW-R RTTY RTTY-R @1 AM FM WFM 1 See the illustration of the Front panel on page i-2. 4
1 D SPL A/B FIL XFC F-1 F-2 F-3 F-4 MEM F-1 SPL F-1 MW F-2 MCL F-3 A/B F-2 V/M F-4 D F-1 F-2 F-3 F-4 : FIL F-3 D MEM MW MCL V/M F-1 F-2 F-3 F-4 VOX COM AGC BRK 1/4 AGC F-1 F-2 F-3 F-4 F-1 F-2 F-3 F-4 XFC F-4 VOX 1/4 AGC AGC TBW F-1 F-2 F-3 F-4 5
1 VOX DUP TON 9600 BRK F-1 F-2 F-3 F-4 F-1 (p. 83) VOX F-1 1 1/4 F-2 COM F-2 DUP F-2 AGC (p. 74) TON AGC F-3 F-3 TBW (p. 84) TBW F-4 9600 9600 F-4 WIDE : 100 Hz to 2900 Hz MID : 300 Hz to 2700 Hz NAR : 500 Hz to 2500 Hz 6
1 D VO MET VSC F-1 F-2 F-3 F-4 DTM (p. 67) F-4 VO (p. 93) VO F-1 VO KEY MET VO DEC MET VO DTM MET VSC F-1 F-2 F-3 F-4 VSC F-1 F-2 F-3 F-4 VSC F-1 F-2 F-3 F-4 D SCN PRI V/M SCN SEL V/M SCN PRI MET F-3 V/M (pgs. 27, 100) F-3 VSC F-4 VSC F-4 KEY F-2 SEL F-2 DEC F-2 RTTY F-1 F-2 VSC F-1 F-2 F-3 F-4 VSC F-1 F-2 F-3 F-4 7
PANEL DESCRIPTION 1 D MW MPW MPR F-1 F-2 F-3 F-4 D SPN HLD FIX SPD F-1 F-2 F-3 F-4 MW F-1 SPN F-1 1 MPW F-2 HLD F-2 MPR F-3 FIX F-3 SPD F-4 8
1 (HM-151) z x c Y]/[Z] [ 0 v 1 b [(GENE) ]. 2 n 3 m USB/LSB CW/CW-R RTTY/RTTY-R AM/FM/WFM USB LSB CW CW-R RTTY RTTY-R AM FM WFM AM, etc See the illustration of the HM-151 on page i-2.., 9
PANEL DESCRIPTION 1 D CAUTION: DO NOT short pin 1 to ground as this can damage the internal 8 V regulator. 1 87654321 HM-151 When HM-151 is connected q +8 V DC output w Frequency up/down e M8V SW r PTT t GND (Microphone ground) y Microphone input u GND i DATA IN PIN NO. 1 2 3 8 +8 V DC output Max. 10 ma Frequency up Frequency down HM-151 connection HM-151 data Ground Ground through 470 Ω Grounded to indicate HM- 151 is connected. Control signal input HM-103 q +8 V DC output w Frequency up/down e M8V SW r PTT t GND (Microphone ground) y Microphone input u GND i Squelch switch When HM-103 is connected PIN NO. 1 +8 V DC output Max. 10 ma 2 Frequency up Ground Frequency down Ground through 470 Ω 3 HM-151 connection Open 8 Squelch open LOW level Squelch closed HIGH level R NEVER connect or use the supplied HM-151 (microphone) with other transceiver. This could cause damage to the transceiver. The HM-151 is designed for use with the IC- 7000 ONLY. 10
1 q w e r t y ui o KEY ACC DATA MIC GND!0 ANT2 ANT1 q ur ( ) (dot) (com) (dash) DC 13.8V i o!0 w!1 e!2!2!1 r Rear panel view t (p. 142) y 11
PANEL DESCRIPTION 1 D PIN No. 1 2 3 4 5 6 Rear panel view 1 D 3 PTT P 4 D 6 SQL 1 D 13 9 10 11 12 5 6 7 8 1 2 3 4 Rear panel view q brown i gray w red o white e orange!0 black r yellow!1 pink t green!2 light y blue blue u purple!3 light green 1 8 V 5 10 FSKK 13 SQLS : Activating band can be changed in the miscellaneolus (other) set mode (p. 131). 12
1 13 9 10 11 12 5 6 7 8 1 2 3 4 Connect to ACC socket ACC 1 ACC 2 4 2 5 1 8 3 6 7 1 4 6 2 5 7 3 q FSKK w GND e HSEND r MOD t AF y SQLS u 13.8 V i ALC q 8 V t ALC w GND y VSEND e HSEND u 13.8 V r NC (BAND*) * See p. 140 for details!4!3!2!1!0 @4 @3 @2 q w e o!5a!5b i @1 u!6 @0 y!9 t!8 r!7 q y w u e i r o t!0 13
14 1 1!1!!3!4!5!5!5!6!7!8!9 (p. 113) @0 @1 @2 @3 @4 TX RIT
2 q 30 mm Coupling ring 10 mm (soft solder) w 10 mm Soft solder 1 2 mm e solder solder r. R ANTENNA SWR 15
2 D MB-62 (optional) D Nut the MB-62* Pull back then up 2 * D q w e fig. 1 fig. 2 fig. 3 To remove Latch (OPC-1443) Separation cable (OPC-1443) D q fig. 1 w fig. 2 16
2 HM-151 KEY ACC DATA MIC GND ANT2 ANT1 DC 13.8V AC outlet A DC power supply 13.8 V; at least 25 A Red + Black _ 17
2 OPC-589 (p. 150) 2 VIDEO OUT SM-20 Vout GND 3.5(d) mm KEY ACC DATA MIC GND ANT2 ANT1 DC 13.8V SP-7/SP-10 AH-4 (p. 20) AH-2b 18
2 13.8 V; at least 25 A Red + Black _ AC 30 A fuses DC R Crimp Grommet black red Solder 12 V battery 19
2 IC-7000 ANT1 Coaxial cable (from the AH-4) AH-4 Long wire or optional AH-2b Ground Ground 2 IC-7000 [ACC] [ANT1] [ANT] AT-180 [ACC] HF to 6 m antenna [ANT 1] [ANT 2] Transceiver AT-180 HF to 2 m/70 cm antenna Duplexer 20
2 ACC-1 7-pin side ANT REMOTE ACC REMOTE INPUT1 GND EXCITER 1 1&2 (supplied with the IC-PW1/EURO) ANT1 GND IC-PW1/EURO AC outlet Non-European versions : 100 120/220 240 V European version : 230 V ( ) R Transceiver ANT1 RF OUT RF IN ALC KEY Relay ALC (Blue) HSEND (Orange) ACC Ground GND 13.8V (Gray) ACC cable 21
2 [KEY] 13 9 10 11 5 6 7 1 2 3 12 8 4 [ACC] Paddle polarity Normal Keyer Type ELEC-KEY Normal Paddle polarity Reverse Keyer Type ELEC-KEY Reverse Paddle polarity Normal Keyer Type BUG-KEY Bug 2 Paddle polarity Keyer Type Normal Straight [MICROPHONE] Paddle polarity Keyer Type Normal ELEC-KEY MIC U/D keyer (HM-103) ON 22
2 D [ACC] [RTTY] [EXT SP] 2-conductor 1 /8 plug TNC or PC interface for the RTTY software AF GND SEND FSKK GND Rear panel view 13 9 10 11 5 6 7 1 2 3 12 8 4 3-conductor 1 /8 plug (supplied) SQL* 1 (light green) FSKK (black) AF out (light blue) MSEND* 2 GND (red) * 1 Connect SQL line when required. * 2 Colors refer to the wires in the supplied ACC cable. ehf/50 MHz: orange u144/430 MHz: purple D Rear panel 13 9 10 11 5 6 7 1 2 3 [ACC] 12 8 4 Rear panel view [MIC] t GND u GND!2 AF out (light blue) Rear panel view r PTT y MIC i SQL* 1 TNC or PC interface for the RTTY software Personal computer * 1 Connect SQL line when required. Colors refer to the wires in the supplied ACC cable. 23
2 D DATA IN q PTTP e t AF OUT wgnd rdata OUT y SQL* 1 TX AUDIO GND SQL RX AUDIO PTT * 1 Connect SQL line when required. [DATA] (Rear panel) TNC or PC interface for the software RS-232C Personal computer 2 D Rear panel [ACC] 13 9 10 11 5 6 7 1 2 3 12 8 4 Rear panel view SQL* 1 (light green) AF in (pink) AF out (light blue) MSEND* 2 GND (red) TNC or PC interface for the software * 1 Connect SQL line when required. * 2 ehf/50 MHz: orange u144/430 MHz: purple Personal computer Colors refer to the wires in the supplied ACC cable. D Rear panel 13 9 10 11 5 6 7 1 2 3 [ACC] 12 8 4 Rear panel view [MIC] t GND u GND!2 AF out (light blue) Rear panel view r PTT y MIC i SQL* 1 TNC or PC interface for the software Personal computer * 1 Connect SQL line when required. Colors refer to the wires in the supplied ACC cable. 24
3 [Y] [PWR] [Z] q w The transceiver s initial frequency and mode D [PWR] [MENU/GRP] [AF]: Max. CCW [POWER]: OFF [PBT]: Center (Push and hold for 1 sec.) [RF/SQL]: Center [PBT/M-ch/RIT]: PBT (indicator lights) [LOCK]: OFF Þ 25
D [EXAMPLE] 26 3 3 VFO MODE KEY Select MEMORY CHANNEL DIAL MEMO PAD 28.025 MHz 7.001 MHz 21.295 MHz BAND Change Transfer Transfer Transfer
3 D q Either Y or Z Either or appears. [MENU/GRP] [F-2] w D q w Push for 1 sec., q then push again. w e r q VFO indicator [MENU/GRP] [F-4] Memory channel indicator 27
BASIC OPERATION 3 SPCH /LOCK HM-151 TUNER /CALL V/M F-1 1.8 1 3.5 2 7 3 10 4 14 5 18 6 21 7 24 8 28 9 50 144 430. 0 CE XFC MW F-2 MODE FIL GENE F-INP ENT Band keys BAND REGISTER 1 REGISTER 2 REGISTER 3 1.8 MHz 1.900000 MHz CW 1.910000 MHz CW 1.915000 MHz CW 3.5 MHz 3.550000 MHz LSB 3.560000 MHz LSB 3.580000 MHz LSB 7 MHz 7.050000 MHz LSB 7.060000 MHz LSB 7.020000 MHz CW 10 MHz 10.120000 MHz CW 10.130000 MHz CW 10.140000 MHz CW 14 MHz 14.100000 MHz USB 14.200000 MHz USB 14.050000 MHz CW 18 MHz 18.100000 MHz USB 18.130000 MHz USB 18.150000 MHz USB 21 MHz 21.200000 MHz USB 21.300000 MHz USB 21.050000 MHz CW 24 MHz 24.950000 MHz USB 24.980000 MHz USB 24.900000 MHz CW 28 MHz 28.500000 MHz USB 29.500000 MHz USB 28.100000 MHz CW 50 MHz 50.100000 MHz USB 50.200000 MHz USB 51.000000 MHz FM 144 MHz 145.000000 MHz FM 145.100000 MHz FM 145.200000 MHz FM 430 MHz 433.000000 MHz FM 433.100000 MHz FM 433.200000 MHz FM General 15.000000 MHz USB 15.100000 MHz USB 15.200000 MHz USB 3 D [Example]: 14 MHz band q SPCH /LOCK TUNER /CALL V/M F-1 1.8 3.5 7 1 2 3 10 14 18 4 5 6 21 24 28 7 8 9 50. 144 0 430 CE XFC HM-151 MW F-2 MODE FIL GENE F-INP ENT 1.8 1 3.5 2 7 3 10 4 14 5 18 6 21 7 24 8 28 9 50 144 430. 0 CE MODE FIL GENE F-INP ENT w e 28
3 DTuning with the main dial [Y] [Z] q [DIAL] HM-151 SPCH /LOCK TUNER /CALL XFC w V/M MW F-1 F-2 1.8 3.5 7 1 2 3 MODE 10 14 18 4 5 6 21 24 28 7 8 9 FIL GENE Band keys 50 144 430. 0 CE F-INP ENT D q w HM-151 SPCH TUNER XFC /LOCK /CALL e V/M MW F-1 F-2 1.8 3.5 7 MODE 1 2 3 10 14 18 FIL 4 5 6 21 24 28 GENE 7 8 9 50 144 430. 0 CE Keypad F-INP ENT [EXAMPLES] 14.025 MHz F-INP ENT 1.8 1 10 4 50. 144 0 3.5 2 14 5 F-INP ENT 18.0725 MHz F-INP ENT 1.8 1 24 8 50. 144 0 21 7 3.5 2 14 5 F-INP ENT 706 khz F-INP ENT 144 0 50. 21 7 144 0 18 6 F-INP ENT 5.100 MHz F-INP ENT 14 5 50. 1.8 1 F-INP ENT 7.000 MHz F-INP ENT 21 7 F-INP ENT 21.280 21.245 F-INP ENT 50. 3.5 2 10 4 14 5 F-INP ENT 29
BASIC OPERATION 3 D q Appears [TS] [DIAL] w e r 3 D q w [MODE] [TS] [DIAL] Appears e r t y 30
3 D [MODE] [TS] [DIAL] q w D [MODE] Appears [TS] [DIAL] q w 31
BASIC OPERATION 3 SSB/CW/RTTY modes Push Any mode Appears momentarily 10 Hz tuning Programmable step tuning SSB/CW/RTTY modes (0.1 khz 100 khz) FM/WFM/AM modes (0.01 khz 100 khz) Push 1 sec. Push 1 sec. 1 sec. momentarily 3 1 Hz tuning Appears D q Appears [MENU/GRP] [F-2] w 32
3 D [AF] q w e [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] r HIGH: LOW : OFF : t D q w e [AF] Audio output increases Audio outut decreases 33
BASIC OPERATION 3 USB LSB CW CW-R RTTY RTTY-R [MODE] AM FM WFM 3 V/M MW F-1 F-2 1.8 3.5 7 1 2 3 MODE MODE SPCH /LOCK TUNER /CALL 10 14 18 4 5 6 XFC FIL 21 24 28 7 8 9 50. 144 0 430 CE GENE F-INP ENT HM-151 q [SPCH/LOCK] w 34
3 [RF/SQL] SETTING RF+SQL (default) SQL AUTO OPERATION Noise squelch (FM mode) Recommended level Squelch is open. Maximum RF gain RF gain adjustable S-meter shows range squelch level Adjustable range Minimum RF gain Maximum RF gain Noise squelch (FM mode) Noise squelch threshold S-meter squelch (FM mode) threshold Squelch is S-meter open. squelch Lowest threshold Highest threshold 35
D 36 3 BASIC OPERATION 3 q w [MENU/GRP] [F-3] DISPLAY INDICATION SWR ALC COM [MENU/GRP] [Z]
3 D Appears [SPCH/LOCK] D /LOCK V/M MW F-1 F-2 1 2 3 MODE 10 14 18 FIL 4 5 6 21 24 28 GENE 7 8 9 50 144 430 F-INP. 0 CE ENT SPCH SPCH /LOCK TUNER /CALL 1.8 3.5 7 XFC HM-151 D SPCH TUNER XFC /LOCK /CALL V/M MW [PTT] F-1 F-2 [TX] 1.8 3.5 7 1 2 3 MODE 10 14 18 4 5 6 FIL 21 24 28 7 8 9 GENE 50 144 430. 0 CE F-INP ENT q HM-151 w [TX] indicator 37
BASIC OPERATION 3 D q [AF] w e r t BAND SSB/CW RTTY/FM AM* HF 2 100 W 1 40 W 50 MHz 2-100 W 1 40 W 144 MHz 2 50 W 2 20 W 430 MHz 2 35 W 2 14 W *Carrier power [MENU/GRP] [F-1] [F-2] [DIAL] 3 D [AF] q w [MENU/GRP] [F-1] [F-2] [F-3] [DIAL] e r t y u i ALC ALC zone o!0 38
4 q [AF] [MODE] [TX] indicator w [Y] e [Z] r [DIAL] LSB or USB appears t y u D [MENU/GRP] [MENU/GRP] M-3 39
4 D [MENU/GRP] [MENU/GRP] M-3 4 D 40
4 q [AF] [MODE] [TX] indicator w [Y] e r [Z] t [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] y CW or CW-R appears [MENU/GRP] [MENU/GRP] M-3 Appears [F-1 BRK] i. o!0 41
RECEIVE AND TRANSMIT 4 D 4. D. 42
4 D [MODE] q w Receive audio tone response 600 Hz 600 Hz Push for 1 sec. inteference signal BFO CW mode (LSB side) inteference BFO signal CW-R mode (USB side) D [AF] q [MENU/GRP] [F-1] [F-2] [DIAL] w e 43
RECEIVE AND TRANSMIT 4 D [AF] q [MENU/GRP] [F-1] [F-2] [DIAL] w e 4 44
4 [MODE] [MENU/GRP] [F-1] [F-2] [F-3] [F-4] [DIAL] q w e r t Memory keyer edit menu Memory keyer send menu Contest number set mode Memory keyer root menu Keyer set mode 45
RECEIVE AND TRANSMIT 4 Either Y or Z D q w [MODE] e [MENU/GRP] [F-1] [F-2] [F-3] [F-4] Contact number Memory keyer content r t y 4 46
4 D q w [MENU/GRP] S. [MENU/GRP] S-1 [MENU/GRP] [F-1] [F-2] [F-3] [F-4] e r t y ABC A to Z (capital leters) 123 0 to 9 (numbers) Memory channel select etc /? ^., @ Selected character Pre-programmed contents CH M1 M2 M3 M4 Contents CQ TEST CQ TEST DE ICOM ICOM TEST UR 5NN BK CFM TU QRZ? u ABC KEYER EDIT M1 CQ TEST CQ TEST DE ICOM ICOM TEST M2 UR 5NN001 BK ABC M3 CFM TU 123 M4 QRZ? ç å DEL SPACE M1..M4 i o!0 47
4 D [MODE] [MENU/GRP] [F-1] [F-2] [F-3] [F-4] q w [MENU/GRP] [MENU/GRP] e r t y 4 1 Number Style 190 ANO: Sets 1 as A, 9 as N and 0 as O. 190 ANT : Sets 1 as A, 9 as N and 0 as T. 90 NO : Sets 9 as N and 0 as O. 90 NT : Sets 9 as N and 0 as T. 2 Count UP Trigger 3 Present Number 48
4 D [MENU/GRP] [MODE] [F-1] [F-2] [F-3] [F-4] q w [MENU/GRP] [MENU/GRP] e r t y 1 Keyer Repeat Time 2 Dot/Dash Ratio DASH 1:1:3 (default) DOT (Fixed*) DASH Adjustable range SPACE (Fixed*) * 49
RECEIVE AND TRANSMIT 4 D 3 Rise Time About rise time Tx Key action Rx Tx output power Set Tx power level 0 Rise time Time 4 Paddle Polarity 4 5 Keyer Type 6 MIC U/D Keyer (HM-103) ON : OFF: D CW paddle MIC connector DOT E u 3.9 kω ±5% MIC U/D w Type MIC U/D Keyer (HM-103) 2.2 kω ±5% DASH 50
4 [AF] [MODE] [TX] indicator q [Y] w [Z] e [MENU/GRP] [F-2] [DIAL] [MENU/GRP] RTTY or RTTY-R appears r M-3 t y 51
RECEIVE AND TRANSMIT 4 D 4 52
53 4 D q w Reverse Normal BFO 170 Hz 2125 Hz 170 Hz 2125 Hz BFO Mark Space displayed freq. displayed freq. Mark Space [MODE] D q w e r t y [DIAL] [MENU/GRP] [F-1] [F-2] [AF]
RECEIVE AND TRANSMIT 4 D [MENU/GRP] [F-1] [F-2] RTTY tuning meter q [. [MENU/GRP] 4 r t y u D q w e [MENU/GRP] [F-3] [F-4] [DIAL] r (p. 55) 54
4 D q w [MENU/GRP] S [MENU/GRP] [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] e r t y u 1 RTTY Decode USOS ON OFF 2 RTTY Decode New Line Code CR,LF,CR+LF CR+LF CR : Carriage Return LF : Line Feed CR, LF and CR+LF (default) CR+LF only 55
RECEIVE AND TRANSMIT 4 D [AF] [MODE] q [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] w e r t 4 q w e q w e 56
4 q [AF] [MODE] [TX] indicator w [Y] [Z] e [DIAL] AM appears r t y u D : M-3 :, : 57
RECEIVE AND TRANSMIT 4 : : S : VSC : 4 D M 58
4 q [AF] [MODE] [TX] indicator w [Y] e [Z] F [DIAL] FM appears r t y u D : [ : D M M-3 VOX 59
60 4 RECEIVE AND TRANSMIT 4 D q w e r t y (Unit: Hz) [DIAL] [MENU/GRP] [F-3] [F-1] 67.0 69.3 71.9 74.4 77.0 79.7 82.5 085.4 088.5 091.5 094.8 097.4 100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8 250.3 254.1
61 4 D q w " r t NN : NR : RN : RR : y [DIAL] [MENU/GRP] [F-3] [F-4] 023 025 026 031 032 036 043 047 051 053 054 065 071 072 073 074 114 115 116 122 125 131 132 134 143 145 152 155 156 162 165 172 174 205 212 223 225 226 243 244 245 246 251 252 255 261 263 265 266 271 274 306 311 315 325 331 332 343 346 351 356 364 365 371 411 412 413 423 431 432 445 446 452 454 455 462 464 465 466 503 506 516 523 526 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754
RECEIVE AND TRANSMIT 4 D q. MENU/GRP] [F-2] [F-3] w e 4 r During tone squelch operation. During DTCS squelch operation. During repeater operation. 62
4 RECEIVE AND TRANSMIT q w e r t [MENU/GRP] [F-2] [F-3] [DIAL] y TONE appears. DUP or DUP+ appears. Shifted frequency and mode appear.. u " i D ANT 1 BW 15k SFT 0 VFO FM FIL2 TONE METER Po 1 14.100.00 USB P.AMP SPLIT 1 TX VFO FM FIL2 TONE : 12:00 [F-2] ATT OFF 1 14.100.00 USB 63
RECEIVE AND TRANSMIT 4 D q [MENU/GRP] [F-1] [F-3] [DIAL] w e r.. t 4 Available tone squelch frequencies (Unit: Hz) 67.0 085.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 088.5 110.9 141.3 167.9 189.9 218.1 71.9 091.5 114.8 146.2 171.3 192.8 225.7 74.4 094.8 118.8 151.4 173.8 196.6 229.1 77.0 097.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 162.2 183.5 206.5 250.3 64
4 RECEIVE AND TRANSMIT D.. [MENU/GRP] [F-4] q V/M MW F-1 F-2 1.8 3.5 7 1 2 3 MODE 10 14 18 4 5 6 FIL 21 24 28 7 8 9 GENE 50 144 430 F-INP. w 0 CE ENT [ HM-151 SPCH /LOCK TUNER /CALL XFC XFC 65
RECEIVE AND TRANSMIT 4 D Set the frequency. Select [F-1] [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] Set the frequency. q Select w Appears e SPL. Push r t Appears y Selected M3, then TON u i push o!0!1!2 Rotate!3 Select Selected M2, then push MW 4 66
4 RECEIVE AND TRANSMIT (pgs. 63, 66) Popup indication appears. NOTE: [MENU/GRP] [F-3] DTMF D q w [MODE] [MENU/GRP] DTMF send menu [F-1] [F-2] [F-3] [F-4] e r t DTMF code sequence 67
RECEIVE AND TRANSMIT 4 D q w [F-1] e [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] r t y. u DTMF memory channel select i 4 o Selected code D q w e [ r 68
5 [MENU/GRP] G-1 (Scope) [MENU/GRP] [Y(BAND)] [Z(MENU/GRP)]. [Y] 69
FUNCTIONS FOR RECEIVE 5 DFix q w G-1 (Scope) [F-1] [MENU/GRP] [F-2] [F-3] [F-4] e [F-3 FIX] fix O r [F-4 SPD] t[f-1 SPN] ±10, 25, 50, 100, 250 khz [F-1 SPN] 55 y H 70
5 DCenter q w [F-1] [MENU/GRP] [F-2] [F-3] [F-4] e = r[f-4 SPD] or t [F-1 SPN] ±10, 25, 50, 100, 250 khz [F-1 SPN] y H.. [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] 71
5 1 Max Hold ON OFF Peak hold is turned ON. Peak hold is turned OFF. (default) 2 Scope Size Normal Wide Normal size is selected. Wide size is selected. (default) 3 FAST Sweep Continuous 1 Sweep [F-4 SPD] 4 FAST Sweep Sound -10dB : Monitoring sound is set 10 db smaller than normal sound. (default) 0dB : Same as normal sound. 5 OFF : No sound comes out while fast sweeping. [P.AMP/ATT] or appears. momentarily momentarily 1 sec. 72
5 RIT [RIT] (outer) [PBT/M-ch/RIT] switch [PBT/M-ch/RIT] indicator q w [PBT/M-ch/RIT] RIT/ TX [MENU/GRP] [F-1] [F-3] e [F-1 RIT] Push for 1sec. tion is ON. r RIT t RIT, [F-3 CLR] Push Quick RIT/ TX Clear y Rotate u [Z(MENU/GRP)] RIT/ TX Appear RIT TX, RIT Push Reset to 0.00k RIT (or TX) RIT (and/or TX) [F-1 RIT] ( [F-2 TX]) q [F-1 RIT] [F-2 TX] TX w [RIT] e [F-1 RIT] r 73 ANT 1 METER Po BW 2.4k SFT 0 TX VFO USB
5 AGC D AGC time constant selection q w M-3 e[f-3 AGC] AGC (MID) AGC AGC. [MENU/GRP] [F-3],, 5 DAGC qfm/wfm w M-3 [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] e[f-3 AGC] r [F-2 FAST], [F-3 MID], [F-4 SLOW] AGC(unit: sec.) Mode Default Selectable AGC time constant t [DIAL] 0.3 (FAST) AGC OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, SSB 2.0 (MID) 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 6.0 (SLOW) [F-2 FAST], [F-3 MIID] or [F-4 SLOW] 0.1 (FAST) OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, CW 0.5 (MID) y FM/WFM 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 r t 1.2 (SLOW) 0.1 (FAST) OFF, 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, u [Z(MENU/GRP)] RTTY 0.5 (MID) 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 1.2 (SLOW) 3.0 (FAST) OFF, 0.3, 0.5, 0.8, 1.2, 1.6, 2.0, AM 5.0 (MID) 2.5, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0 7.0 (SLOW) FM/WFM 0.1 (FAST) Fixed 74
5 IF SSBCW RTTY DIF Selected IF filter [MENU/GRP] [F-3] Passband width q Shift w frequency Popup indicator appears SPCH TUNER XFC /LOCK /CALL e V/M MW F-1 F-2 1.8 3.5 7 MODE 1 2 3 10 14 18 4 5 6 FIL 21 24 28 GENE 7 8 9 50 F-INP. 144 0 430 CE ENT FIL HM-151 75
5 D (SSB/CW/RTTY/AM only) q w [MENU/GRP] [F-1] [F-2] [F-3] [DIAL] e Selected IF filter FIL1 3.0 khz 50 500 Hz (50 Hz)/ SSB FIL2 2.4 khz 600 3.6 khz (100 Hz) FIL3 1.8 khz FIL1 1.2 khz 50 500 Hz (50 Hz)/ Passband CW FIL2 500 Hz 600 3.6 khz (100 Hz) width FIL3 250 Hz FIL1 2.4 khz Shift 50 500 Hz (50 Hz)/ frequency RTTY FIL2 500 Hz 600 2.7 khz (100 Hz) FIL3 250 Hz r 5 FIL1 9.0 khz 200 Hz 10.0 khz t AM FIL2 6.0 khz (200 Hz) FIL3 3.0 khz FIL1 15 khz FM* FIL2 10 khz Fixed FIL3 7.0 khz y WFM FIL 280 khz Fixed u *: D q w [MENU/GRP] [F-3] [F-4] e r t Push y 76
5 [PBT/M-ch/RIT(CLR)] switch/[pbt] (inner) control [PBT/M-ch/RIT] indicator [F-3] [PBT] (outer) control [MENU/GRP] Dot indicator appears when PBT is activate Selected IF filter Passband width Shift frequency Popup indicator appears [PBT] PBT OPERATION EXAMPLE Both controls at center position Cutting the lower passband Cutting both higher and lower passbands Passband Passband IF center frequency Interference Desired signal Interference Desired signal Interference 77
5 [NB/ADJ] NB D q [NB/ADJ] w e r 5 [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] 1. NB Level 50% 50% (default) 2. NB Width 50 50 (default) 78
5 Appears [MENU/GRP] [F-4] [NR/LEV] [DIAL] Noise reduction OFF Noise reduction activated NR NR Level 0 NR NR Level 5 Noise components Desired signal (CW) D q w e NR Level 4 4 (default) 79
5 D Appears [ANF/ REC] 5 Desired signal (AF) Desired signal (AF) I 80
5 D Appears [MNF/ADJ] D q [MNF/ADJ] w e r [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] 81
5 Appears [MENU/GRP] [F-4] q w 5 [AF] q w e [MENU/GRP] [F-1] [F-2] [DIAL] r [EXAMPLE]: S 1 3 5 7 9 20 40 60dB t S 1 3 5 7 9 20 40 60dB 82
6 q Appears w [MENU/GRP] [F-1] e D [MENU/GRP] [F-1] [F-2] [DIAL] q w e r y - u 83
6 D 1. VOX Gain 50% 50% (default) [F-4 DEF] 2. Anti-VOX 50% 50% (default) 3. VOX Delay 0.2s 0.2 sec. (default) 6 e q w [MENU/GRP] [F-4] WIDE : 100 Hz to 2900 Hz MID : 300 Hz to 2700 Hz NAR : 500 Hz to 2500 Hz 84
85 6 D D q w e " q w e r [MENU/GRP] [F-1] [DIAL] [MENU/GRP] [F-1] Appears q w e [MENU/GRP] [F-1] Appears
6 TX TX [PBT/M-ch/RIT] switch [RIT] (outer) [PBT/M-ch/RIT] indicator q w RIT/ TX e[f-2 TX] TX [MENU/GRP] [F-2] [F-3] r TX Push for 1sec. t TX Quick RIT/ TX Clear Push y TX TX] [F-2 Rotate u[z(menu/grp)] RIT/ TX 6 RIT TX TX Appear Push Reset to 0.00k TX TX F-1 RIT] ) [F-2 TX] q[f-1 RIT] [F-2 TX] TX w e r Push and hold 86
87 6 q w e[f-2 COM] [MENU/GRP] [F-2] Appears q w e r t y u [MENU/GRP] [DIAL] [AF] [F-4] [F-1] [F-2]
6 D [AF] [MENU/GRP] [F-1] [F-2] [F-3] [DIAL] [MENU/GRP] [F-2] [F-3] [DIAL] q q w S-1 [F-3 MET] w e M-1 [F-2 COM] 6 ALC e r [AF(SET)] [F-1 Y] [F-2 Z] MIC Gain. NOTE: [Z(MENU/GRP)] ALC ALC zone COMP Level 5 5 (default) 88
6 Split [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] q CONVENIENT M-2 [F-4 V/M] M-1 [F-2 A/B] q[f-inp/ent] (HM-151) w e[f-1 SPL] (M-1) w [EXAMPLE] LCD To operate on 1 khz F-INP 1.8 ENT 1 (SPL) higher frequency: HM-151 Transceiver To operate on 3 khz lower frequency: CONVENIENT USB VFO USB FIL2 ATT OFF 1 14.100.00 USB e. ANT 1 ANT 1 METER Po P.AMP 1 BW 2.4k SFT 0 TX BW 2.4k SFT 0 VFO VFO 1 USB USB FIL2 FIL2 14.100.00 : 12:00 : 12:00 F-INP ENT 50 HM-151. 7 3 (SPL) Transceiver r METER Po P.AMP 1 ATT OFF TX 1 14.100.00 SPLIT VFO USB FIL2 1 14.100.00 USB USB 89 ANT 1 METER Po P.AMP 1 BW 2.4k SFT VFO 0 USB FIL2 1 14.100.00 SPLIT TX VFO USB FIL2 USB : 12:00
6 [AF] [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] q e 6 w ANT 1 METER Po P.AMP 1 BW 2.4k SFT 0 TX VFO 1 VFO USB USB FIL2 14.100.00 FIL2 USB : 12:00 ATT ANT BW 2.4k SFT 0 ANT OFFBW 2.4k SFT 0 1 1 1 14.100.00 USB VFO USB FIL2 VFO USB FIL2 METER METER Po Po 1 14.100.00 1 14.100.00 USB P.AMP SPLIT P.AMP SPLIT 1 TX VFO USB FIL2 1 TX VFO USB FIL2 q ATT ATT OFF q OFF 1 14.100.00 1 14.100.00 USB w w e r 90
6 D [AF] q w [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] e r t D q w e 91
6 D q w e r t 1.5 [MENU/GRP] [F-3] > 1.5 SWR 1 1.5 2-3 6 D q w e r [F-1] to start [F-4] mesuring. [F-2] [F-3] t Measuring (after pushing [F1]) y u i 1.5 : 1 o 1.0 : 1!0 The antenna is well matched in this range 4.0 : 1 3.0 : 1 2.0 : 1 92
7 Menu group selection Either Y or Z D q ws-1. e[f-1 VO] (T1 T4) [MENU/GRP] [F-1] [F-2] [ANF/ REC] r [ANF/ REC]. t [ANF/ REC] y [Z(MENU/GRP)] MIC (p. 99) 93
7 D q [ANF/ REC] w[anf/ REC] Blinks [ANF/ REC] q S-1 w [F-1 VO] 7 [MENU/GRP] [F-1] [F-2] [F-3] e r t 94
7 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z q S-1. w [MENU/GRP] [F-1] [F-2] [F-4] e r 95
7 D q w [MENU/GRP] [F-1] [F-3] e r t 7 y u D q q w w e r r 96
7 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z (! # $ % &? " ' ` ^ + /., : ; = < > ( ) [ ] { } @) q [F-1] [MENU/GRP] [F-2] [F-3] [F-4] w e[f-1 ] [F-2 ] r [F-4 NAM] t [Y(MENU/GRP)] [ABC], [abc], [123] [etc] y [F-1 Å] [F-2 Ç] DEL] [F-3 SPC] [F-4 HM-151, [9] [0] u [Z(MENU/GRP)] i e y o [Z(MENU/GRP)] 97
7 q S-1 w [F-1 VO] [F-2 TX] [F-2 TX] [F-1] [MENU/GRP] [F-2] [F-3] [F-4] e[f-1 T1] [F-4 T4] T1 T4 r T1], [F-1 [F-4 T4] t [Z(MENU/GRP)] 7 D q [Y (MENU/GRP)] e T1] [F-3 T3], [F-1 r [F-4 DEF] t [Z(MENU/GRP)] 98
7 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z [MENU/GRP] [F-1] [F-2] [F-4] q S-1 w[f-1 VO] Z(MENU/GRP)] [ e [F-4 SET] r [F-1 ] [F-2 ] [F-4 DEF] t[z(menu/grp)] D 1. Auto Monitor ON OFF DEF] [F-4 2. MIC Memo ON OFF [F-4 DEF] 99
8 1 99 (split Yes Yes Yes 1A 3B Yes Yes No C1, C2 (split ) Yes Yes No q [PBT/M-ch/RIT] switch/[m-ch] (inner) control [PBT/M-ch/RIT] indicator [PBT/M-ch/RIT] w M-2 7 8 e [F-4 V/M] [MENU/GRP] r[m-ch] [RIT] (outer) control [F-4] [EXAMPLE]: [RIT] [ Y]/[Z] t [F-4 V/M] V/M 100
8 M, S G(Graphic) Either M-1, M-2 M-3 Y or Z D q [PBT/M-ch/RIT] switch/[m-ch] (inner) control [PBT/M-ch/RIT] indicator [PBT/M-ch/RIT] w [MENU/GRP] [RIT] (outer) control [F-2] e M-2 r[f-1 MEM] [EXAMPLE]: Programming 7.088 MHz/LSB into ch 12. [F-1 LST] [Z( MENU/GRP)] t [M-ch] y[f-2 MW] V/M] [F-4 MW Push for 1 sec. 101
8 D [PBT/M-ch/RIT] /[M-ch] [EXAMPLE]: 21.280 MHz/USB [PBT/M-ch/RIT] [Y] [Z] [MENU/GRP] [F-2] [F-4] q [PBT/M-ch/RIT] [PBT/M-ch/RIT] wm-2 e [F-4 V/M] [M-ch] VFO r MW Y(BAND)] [ [Z(BAND)] t [F-2 MW] Push for 1 sec. 8 102
8 M, S G(Graphic) Either M-1, M-2 M-3 Y or Z D [PBT/M-ch/RIT] switch/[m-ch] (inner) control [PBT/M-ch/RIT] indicator MEM [MENU/GRP] [F-1] [F-4] q M-2 w[f-4 V/M] LST e[f-1] (MEM, LST) r [PBT/M-ch/RIT] [PBT/M-ch/RIT] t[m-ch] [ Y]/[Z] 103
8 D [PBT/M-ch/RIT] /[M-ch] [PBT/M-ch/RIT] q w [MENU/GRP] [F-1] e ß r t y Push [F-1 SEL] D 8 q w [F-4 BNK] [RIT] e[z(menu/grp)] Bank indication q w [PBT/M-ch/RIT] ch/rit [PBT/M-ch/RIT] BNK e [RIT] Push [MENU/GRP] [RIT] (outer) control [F-4] 104
8 M, S G(Graphic) Either M-1, M-2 M-3 Y or Z D [PBT/M-ch/RIT] /[M-ch] ( ) [PBT/M-ch/RIT] [F-1] q [MENU/GRP] [F-2] [F-3] [F-4] [DIAL] w e r t NAM Selected character y u i Ç o!0!1 105
106 8 8 q w e r t y u MCL Push for 1 sec. [MENU/GRP] [F-1] [F-3] [F-4] D q w e r t y MCL [MENU/GRP] [F-3] [F-4]
8 M, S G(Graphic) Either M-1, M-2 M-3 Y or Z D [PBT/M-ch/RIT] /[M-ch] ( ) q [PBT/M-ch/RIT] w e r [MENU/GRP] [F-1] [F-4] t : 21.320 MHz/USB (VFO) : 14.020 MHz/CW y V/M Push for 1 sec. 107
8 D [PBT/M-ch/RIT] switch/[m-ch] (inner) control [PBT/M-ch/RIT] indicator q [MENU/GRP] [F-4] w e r t y 8 108
8 [MENU/GRP] [F-2] [F-3] M, S G(Graphic) Either S-1, S-2 S-3 Y or Z D q w MPW MP5 Newest MP4 MP3 MP2 MP1 Oldest 109
8 D MP5 MP4 MP3 MPR MP2 MP1 Push MPR 8 110
9 Scan edge 1A or 1B Scan Jump Scan edge 1B or 1A VFO frequency Memory channel ß (select) BLANK ß (select) BLANK Mch 2 Mch 3 Mch 4 Mch 2 Mch 3 Mch 4 Mch 1 ß (select) ß (select) Mch 5 Mch 1 ß (select) ß (select) Mch 5 Mch 99 Mch 7 Mch 6 Mch 99 Mch 7 Mch 6 ß (select) ß (select) ß (select) ß (select) (p. 101) 111
9 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z q w e r [RF/SQL] [MENU/GRP] [F-1] [F-3] t y Select VFO mode u then push [F-1 SCN] 9 q [RF/SQL] w e r [MENU/GRP] [F-1] [F-3] [RIT] (outer) control t y u 112
9 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z q w e r t [RF/SQL] y [MENU/GRP] [F-1] [F-2] [F-3] u Select memory mode. Designate. Push [F-1 SCN], then push [F-2 SEL]. q w e r t [RF/SQL] [MENU/GRP] [F-2] y u Push [F-2 PRI]. 113
10 114 [TUNER/CALL] D [TUNER/CALL] D 9 10
10 M, S G(Graphic) Either S-1, S-2 S-3 Y or Z RDANGER!: HIGH VOLTAGE! NEVER touch the antenna element while tuning or transmitting. AH-4 setting example: Optional AH-2b antenna element 1 2λ For outdoor operation Long wire [TUNER/CALL] D q w e r 115
11 D q w e r t y Rear panel view PIN #/NAME q DATA IN w GND e PTTP r DATA OUT t AF OUT y SQL D D q w [MENU/GRP] [F-4] D q w e - - 10 11 116
12 q w e r [AF] t [MENU/GRP] [F-1] [F-2] [F-3] [F-4] [DIAL] 1 Year 2005 SET] [F-3 2 Date 3-15(Tue) [F-3 SET] 3 Time (Now) 15:00 4 CLOCK2 Function ON OFF 5 CLOCK2 Offset ± 0:00 + 9:00 (default) 6 Auto Power OFF 60min 117
12 D q w Push [SET] e r D q w e r D q w 12 e r 118
12 D q w e D q w e D q w e r 119
13 [AF] q w e r t [MENU/GRP] [F-1] [F-2] [F-3] [F-4] [DIAL] Push [AF] momentarily 12 13 120
13 1 RF Power 100% 2 MIC Gain 50% 3 SSB TBW (WIDE) L 100 [Hz] SSB 4 SSB TBW (WIDE) H 2900 [Hz] 5 SSB TBW (MID) L 300 [Hz] 6 SSB TBW (MID) H 2700 [Hz] 7 SSB TBW (NAR) L 500 [Hz] 8 SSB TBW (NAR) H 2500 [Hz] 1 RF Power 100% 2 Key Speed 20WPM CW 3 CW Pitch 600 [Hz] 4 Side Tone Level 50% 5 Side Tone Level Limit ON 1 RF Power 100% 2 Twin Peak Filter OFF RTTY 3 RTTY Mark Frequency 2125 [Hz] 4 RTTY Shift Width 170 [Hz] 5 RTTY Keying Polarity Normal AM 1 RF Power 100% FM/WFM 2 MIC Gain 50% RF Power (all modes) 100% 100% (default) MIC Gain (SSB/AM/FM modes) 50% 50% (default) SSB TBW (WIDE) L (SSB mode) 100 100 Hz (default) 121
13 SSB TBW (WIDE) H (SSB mode) 2900 2900 Hz (default) SSB TBW (MID) L (SSB mode) 300 300 Hz (default) SSB TBW (MID) H (SSB mode) 2700 2700 Hz (default).: SSB TBW (NAR) L (SSB mode) 500 500 Hz (default) SSB TBW (NAR) H (SSB mode) 2500 2500 Hz (default) 13 Key Speed (CW mode) 20WPM 20 WPM (default) CW Pitch (CW mode) 600 600 Hz (default) 122
13 Side Tone Level (CW mode) 50% 50% (default) Side Tone Level Limit (CW mode) ON OFF Twin Peak Filter (RTTY mode) ON OFF (default) RTTY Mark Frequency (RTTY mode) 2125 1275 RTTY Shift Width (RTTY mode) 170 425 RTTY Keying Polarity (RTTY mode) Normal Reverse - : Key open/close = Mark/Space - : Key open/close = Space/Mark 123
13. 1 (LCD) 40% 40% (default) 2 (LCD) 70% 70% (default) 3 40% 40% (default) 4 LCD 65% (default) 65% 13 5 B 50% 50% (default) 6 D A 124
13 7 D Basic 8 D Normal 9 ON OFF (default) 10 F ON OFF (default) 11 F ON OFF (default) 12 1 ON OFF (default) 13 CENTER/FIX ON OFF (default) 125
13 14 TV Popup (CH Up/Down) ON Popup function is ON (default) OFF Popup function is OFF 15 TV Popup (P.AMP/ATT) ON OFF Popup function is ON (default) Popup function is OFF 16 ON OFF 17 ON OFF 18 DTMF ON OFF 13 19 1 2 20 ON OFF 126
13 21 My Call r q t w y e [F-3 EDT] Selected character 22 ON OFF ON : RIT/ TX OFF : 127
13 1 ON OFF 2 50% 50% 3 ON OFF 4 ON OFF 5 50% 50% (default) 13 6 ON OFF 128
13 7 RF/SQL RF+SQL SQL AUTO 8 Quick SPLIT ON OFF (default) 9 SPLIT Offset 0.000MHz -9.999MHz 0.000 MHz offset Minus 9.999 MHz offset (default) 10 SPLIT LOCK ON OFF (default) 11 DUP Offset HF 0.100MHz 0.1 MHz offset (default) 12 DUP Offset 50M 0.500MHz 0.5 MHz offset (default) 129
13 13 DUP Offset 144M 0.600MHz 0.6 MHz 14 DUP Offset 430M 5.000MHz 5 MHz 15 One Touch Repeater DUP- OFF (default) 16 Auto Repeater ON-1 OFF (default) OFF. 13 17 Tuner (Auto Start) ON OFF ON. OFF. (default) 130
13 18 Tuner (PTT Start) ON OFF 19 [TUNER] Switch Auto [TUNER/CALL] Manual [TUNER/CALL] 20 VSEND Select ON UHF Only OFF VSEND is for the 144/430 MHz; HSEND is for the HF/50 MHz. (default) VSEND is for the 430 MHz; HSEND is for the HF/50/144 MHz. VSEND is not used; HSEND is for all bands. 21 SPEECH Level 50% 50% (default) 22 SPEECH Language English (default) Japanese 23 SPEECH Speed HIGH LOW (default) 131
13 24 SPEECH S-Level ON OFF (default) 25 SPEECH [MODE] Switch ON OFF ON (default) 26 Memopad Numbers 5 10 27 SCAN Speed HIGH LOW 28 SCAN Resume ON 13 OFF 29 MAIN DIAL Auto TS HIGH LOW OFF 132
13 SET MODE 30 HM-151 [F-1] P.AMP/ATT (Preamplifier/attenuator), NB (Noise blanker), NR (Noise reduction), MNF (Manual notch filter), ANF (Auto notch filter), TS (Tuning step), SPL (Split operation), A/B (VCO A/B selection), MCL (Memory clear), BNK (Bank selection), COM (Speech compressor), MPW ANF AGC (AGC selection), TBW (TX filter width), DUP (Duplexer), TON (FM tone operation), MET (Meter selection), VSC (Voice squelch control), MPW (Memo pad write), MPR (Memo pad read), <SCOPE> (Scope selection), <METER> (Multi-meter selection) 31 HM-151 [F-2] MPR NB 32 MIC Up/Down Speed HIGH LOW (default, 5 tuning steps/sec.) 33 Quick RIT/ TX Clear [F-3 CLR] RIT/ TX ON OFF (2.5 tuning steps/sec.) (default) 34 SSB/CW Synchronous Tuning ON OFF (default) 133
SET MODE 13 35 CW Normal Side LSB (default) USB 36 VOICE 1st Menu VOICE-RX/TX VOICE-Root lected. (default) 37 KEYER 1st Menu KEYER-SEND KEYER-Root Keyer lected. (default) Keyer root menu is selected. 38 DTMF 1st Menu DTMF-SEND DTMF-Root DTMF lected. (default) DTMF root menu is selected. 39 Mode Select (SSB) ON OFF SSB SSB modes are inhibited. (default) 13 40 Mode Select (CW) ON OFF CW CW modes are inhibited. (default) 41 Mode Select (RTTY) ON OFF RTTY RTTY modes are inhibited. (default) 134
13 SET MODE 42 Mode Select (AM) ON OFF AM (default) 43 Mode Select (FM) ON FM (default) OFF FM 44 Mode Select (WFM) ON OFF WFM WFM (default) 45 External Keypad (VOICE) ON : For your information OFF : 4.7kΩ ±5% S4 (T4/M4) 2.2kΩ ±5% S3 (T3/M3) 1.5kΩ ±5% S2 (T2/M2) 1.5kΩ ±5% S1 (T1/M1) To [MIC] connector pin w To [MIC] connector pin u Front Keypad Type Ext Keypad, USER EXTERNAL KEYPAD 46 External Keypad (KEYER) ON : OFF : 135
SET MODE 13 47 Front Keypad Type Dot/Dash Dot/Dash (default) Ext Keypad External keypad 48 CI-V Baud Rate Auto Auto baud rate (default) 19200 19200 bps 49 CI-V Address 70h 7Fh Address of 70h Address of 7Fh (default) 50 CI-V Transceive ON OFF Transceive ON Transceive OFF (default) 51 REF Adjust 13 136