HP Color LaserJet Pro M452dw Getting Started Guide - XLWW

Transcription

1 Color LaserJet Pro M452dw Getting Started Guide English... 1 Bahasa Indonesia... 4 한국어... 7 ไทย...10 IMPORTANT: Follow Steps 1-2 on the printer hardware setup poster, and then continue with Step Initial setup on the control panel After turning on the printer, wait for it to initialize. To navigate the control panel, use touch, swipe, and scroll gestures. Follow the prompts on the control panel to configure these settings: Language Location Default Settings Under Default Settings select one of these options: Self-managed: Optimized default settings for most users that include guided setup and configuration steps and automatic updates. IT-managed: Optimized default settings for fleet manageability. Settings are fully customizable after initial setup. NOTE: Select Print Information Page to print a page that instructs how to change the default settings. NOTE: Touch the Help button on the printer control panel to access help topics. 繁体中文 Select a connection method and prepare for software installation USB connection directly between the printer and the computer Use an A-to-B type USB cable (not included with all models). Windows 1. Do not connect the USB cable before installing the software. If the cable is already connected, disconnect it before continuing. The installation process prompts to connect the cable at the appropriate time. 2. Continue with 5. Locate or download the software installation files. NOTE: During software installation, select the option to Directly connect this computer using a USB cable. (Windows only) Mac 1. For Mac, connect the USB cable between the computer and the printer before installing the software. 2. Continue with 5. Locate or download the software installation files. Wired (Ethernet) network connection Use a standard network cable. (Cable not included.) 1. Connect the network cable to the printer and to the network. Wait a few minutes for the printer to acquire a network address. 2. On the control panel, touch the Connection Information button. If an IP address is listed, the network connection has been established. If not, wait a few more minutes and try again. Note the IP address for use during software installation. Example IP address: To manually configure the IP address, see Manually configure the IP address. 3. Continue with 5. Locate or download the software installation files. NOTE: During software installation, select the option to Connect through a network. (Windows only) Built-in wireless network connection 1. Touch the Connection Information button. 2. Touch the Network Wi-Fi OFF button. 3. Touch the Settings button. 4. Touch the Wireless Setup Wizard item. 5. Select the correct network SSID from the list. If you do not see the SSID, touch Enter SSID and provide the network SSID manually. 6. Use the keyboard to enter the passphrase, and then touch the OK button. 7. Wait while the printer establishes a network connection. 8. Touch the Connection Information button. If an IP address is listed, the network connection has been established. If not, wait a few more minutes and try again. Note the IP address for use during software installation. Example IP address: To print from a computer, continue with 5. Locate or download the software installation files. To print from a phone or tablet only, continue with 7. Mobile and wireless printing. NOTE: During software installation, select the option to Connect through a network. (Windows only) Manually configure the IP address See the printer user guide for information on how to manually configure the IP address. See the Troubleshooting section of this guide. 1

2 5. Locate or download the software installation files Method 1: Download from HP Easy Start (Windows and OS X) 1. Go to 123.hp.com/laserjet, and click Download. 2. Follow the onscreen instructions and prompts to save the file to the computer. 3. Launch the software file from the folder where the file was saved, and continue with 6. Install the software. Method 3: Install from the printer CD (Windows only) 1. Insert the printer CD into the computer. 2. Continue with 6. Install the software. Method 2: Download from printer support Web site (Windows and OS X) 1. Go to 2. Select Software and drivers. 3. Download the software for your printer model and operating system. 4. Launch the installation file by clicking on the.exe or.zip file as necessary, and continue with 6. Install the software. 6. Install the software Windows solution 1. The software installer detects the language of the operating system, and then it displays the main menu of the installation program in the same language. When installing from the CD, if the installer program does not start after 30 seconds, browse the CD drive on the computer and launch the file named SETUP.EXE. 2. The Software Selection screen details the software to be installed. The recommended software installation includes the print driver and software for all available printer features. To customize the software installed, click the Customize software selections link. When finished, click the Next button. 3. Follow the on-screen instructions to install the software. 4. When prompted to select a connection type, select the appropriate option for the type of connection: Directly connect this computer using a USB cable Connect through a network Help me set up a first-time wireless connection NOTE: When connecting through a network, the easiest way to detect the printer is to select Automatically find my printer on the network. NOTE: For wireless installation, select the option to Help me set up a first-time wireless connection, and then select Yes, retrieve the wireless settings on my computer. OS X solution 1. The software installer detects the language of the operating system, and then it displays the main menu of the installation program in the same language. 2. Follow the on-screen instructions to install the software. When prompted, connect the printer using the appropriate cable for the connection type, or ensure that the printer is prepared for wireless communication. 3. At the end of the software installation process, use the HP Utility Setup Assistant to configure printer options. 7. Mobile and wireless printing (optional) To print from a phone or tablet, connect the device to the same wireless network as the printer. Apple ios devices (AirPrint): Open the item to print, and select the Action icon. Select Print, select the printer, and then select Print. Newer Android devices (4.4 or newer): Open the item to print, and select the Menu button. Select Print, select the printer, and select Print. Some devices require downloading the HP Print Service plugin app from the Google Play store. Older Android devices (4.3 or older): Download the HP eprint app from the Google Play store. Windows Phone: Download the HP AiO Remote app from the Windows Store. Learn More About Mobile Printing To learn more about other mobile printing options, including additional eprint solutions, scan the QR code, or see the Mobile printing section of the user guide. Wi-Fi Direct Wi-Fi Direct enables close-proximity printing from a wireless mobile device directly to a Wi-Fi Direct-enabled printer without requiring a connection to a network or the Internet. Enable Wi-Fi Direct 1. Touch the Connection Information button. 2. Touch the Wi-Fi Direct OFF button. 3. Touch the Settings button. 4. Select the On/Off item, and then select On. 5. For secure printing, select Security, and then select On. Note the passphrase that displays. Use this passphrase to allow access to the mobile devices. To allow unsecured printing, select Security, and then select Off. For more information on wireless printing and wireless setup, go to 2

3 8. Set up HP eprint via (optional) Use HP eprint via to print documents by sending them as an attachment to the printer s address from any -enabled device, even from devices that are not on the same network. To use HP eprint via , the printer must meet these requirements: The printer must be connected to a wired or wireless network and have Internet access. HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected. Enable HP Web Services NOTE: Before enabling HP Web Services, verify that the printer is connected to a network. 1. Touch the Apps button. 2. In the Enable Web Services screen, touch OK. The printer enables Web Services. Use the Print button to print an information page. The information page contains a printer code necessary to register the HP printer at HP Connected. 3. Go to com to create an HP eprint account and complete the setup process. Troubleshooting User guide The user guide includes printer usage and troubleshooting information. It is available on the printer CD and on the Web: 1. Go to 2. Click Manuals. For Windows, the user guide is copied to the computer during the recommended software installation. Windows XP, Windows Vista, and Windows 7: Click Start, select Programs or All Programs, select HP, select the folder for the HP printer, and then select Help. Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on the app bar, click the icon with the printer s name, and then select Help. Check for firmware updates 1. On the control panel, swipe the control panel screen and touch the Setup button. 2. Open the Service menu. 3. Select LaserJet Update. 4. Select Check for Updates Now. Control panel help Touch the Help button on the printer control panel to access help topics. Additional support resources For HP s all-inclusive help for the printer, go to Solve problems Find advanced configuration instructions Download software updates Join support forums Find warranty and regulatory information Access mobile printing resources Wired (Ethernet) network connection Verify that the printer is attached to the correct network port using a cable of the correct length. Verify that the lights next to the network port are lit. Verify that the print driver is installed on the computer. Test the network connection by pinging the printer: Windows: Click Start > Run. Type cmd, and press Enter. Type ping, type a space, type the printer IP address, and then press Enter. Example IP address: OS X: Open the Network Utility, and type the IP address in the ping pane. Press Enter. Example IP address: If the window displays round-trip times, the network is working. If the ping does not work, try restarting the printer and recheck all of the connection steps. Wireless network connection Verify that the network cable is not connected. The printer cannot connect to a wireless network when a network cable is connected. Verify that the printer and wireless router are turned on and have power. Also make sure the wireless switch is turned on. Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access point (wireless router). Verify that the print driver is installed on the computer. Verify that the computer and printer connect to the same wireless network. For Mac, verify that the wireless router supports Bonjour. Restart the wireless router. Perform the wireless diagnostic test 1. On the control panel, swipe the control panel screen and touch the Setup button. 2. Select Self Diagnostics, and then select Run Wireless Test. 3

4 English... 1 Bahasa Indonesia... 4 한국어... 7 ไทย...10 繁体中文...13 PENTING: Ikuti Langkah 1-2 pada poster konfigurasi perangkat keras printer, lalu lanjutkan dengan Langkah 3. Panduan Persiapan Color LaserJet Pro M452dw 3. Konfigurasi awal pada panel kontrol Setelah menghidupkan printer, tunggu proses inisialisasi. Untuk menavigasikan panel kontrol, gunakan gerakan sentuh, geser, dan gulir. Ikuti perintah pada panel kontrol untuk mengkonfigurasi pengaturan berikut: Bahasa Lokasi Pengaturan Default Dalam Default Settings (Pengaturan Default), pilih salah satu dari pilihan berikut: Dikelola sendiri: Pengaturan default yang dioptimalkan untuk sebagian besar pengguna yang mencakup langkah-langkah pengaturan dan konfigurasi terpandu, serta pembaruan otomatis. Dikelola TI: Pengaturan default yang dioptimalkan untuk kemampuan pengelolaan cepat. Pengaturan dapat disesuaikan sepenuhnya setelah konfigurasi awal. CATATAN: Pilih Print Information Page (Cetak Halaman Informasi) untuk mencetak halaman yang menunjukkan cara mengubah pengaturan default. CATATAN: Sentuh tombol Help (Bantuan) pada panel kontrol printer untuk mengakses topik bantuan. 4. Memilih metode sambungan dan mempersiapkan penginstalan perangkat lunak Sambungan USB secara langsung antara printer dan komputer Gunakan kabel USB jenis A ke B (tidak disertakan dengan semua model). Windows 1. Jangan sambungkan kabel USB sebelum menginstal perangkat lunak. Jika telah tersambung, lepaskan kabel sebelum melanjutkan. Proses penginstalan meminta untuk menyambungkan kabel pada waktu yang tepat. 2. Lanjutkan dengan "5. Mencari atau men-download file instalan perangkat lunak". CATATAN: Saat penginstalan perangkat lunak berlangsung, tetapkan pilihan ke Directly connect this computer using a USB cable (Sambungkan komputer ini secara langsung menggunakan kabel USB). (hanya Windows) Mac 1. Untuk Mac, sambungkan kabel USB antara komputer dan printer sebelum menginstal perangkat lunak. 2. Lanjutkan dengan "5. Mencari atau men-download file instalan perangkat lunak". Sambungan jaringan berkabel (Ethernet) Gunakan kabel jaringan standar. (Kabel tidak disertakan.) 1. Sambungkan kabel jaringan ke printer dan jaringan. Tunggu beberapa menit agar printer mendapatkan alamat jaringan. 2. Di panel kontrol, sentuh tombol Connection Information (Informasi Sambungan). Jika alamat IP tercantum dalam daftar, maka sambungan jaringan telah ditetapkan. Jika tidak, tunggu beberapa menit, lalu coba lagi. Catat alamat IP untuk digunakan saat penginstalan perangkat lunak berlangsung. Contoh alamat IP: Untuk mengkonfigurasi alamat IP secara manual, lihat "Mengkonfigurasi alamat IP secara manual". 3. Lanjutkan dengan "5. Mencari atau men-download file instalan perangkat lunak". CATATAN: Saat penginstalan perangkat lunak berlangsung, tetapkan pilihan ke Connect through a network (Sambungkan melalui jaringan). (hanya Windows) Sambungan jaringan nirkabel internal 1. Sentuh tombol Connection Information (Informasi Sambungan). 2. Sentuh tombol Network Wi-Fi OFF (Wi-Fi Jaringan TIDAK AKTIF). 3. Sentuh tombol Settings (Pengaturan). 4. Sentuh item Wireless Setup Wizard (Wizard Pengaturan Nirkabel). 5. Pilih SSID jaringan yang benar dari daftar. Jika Anda tidak melihat SSID, sentuh Enter SSID (Masukkan SSID), lalu masukkan SSID jaringan secara manual. 6. Gunakan keyboard untuk memasukkan frasa akses, lalu sentuh tombol OK. 7. Tunggu sementara printer menetapkan sambungan jaringan. 8. Sentuh tombol Connection Information (Informasi Sambungan). Jika alamat IP tercantum dalam daftar, maka sambungan jaringan telah ditetapkan. Jika tidak, tunggu beberapa menit, lalu coba lagi. Catat alamat IP untuk digunakan saat penginstalan perangkat lunak berlangsung. Contoh alamat IP: Untuk mencetak dari komputer, lanjutkan dengan "5. Mencari atau men-download file instalan perangkat lunak". Untuk mencetak hanya dari ponsel atau tablet, lanjutkan dengan "7. Pencetakan seluler dan nirkabel". CATATAN: Saat penginstalan perangkat lunak berlangsung, tetapkan pilihan ke Connect through a network (Sambungkan melalui jaringan). (hanya Windows) Mengkonfigurasi alamat IP secara manual Untuk mendapatkan informasi tentang cara mengkonfigurasi alamat IP secara manual, lihat panduan pengguna printer. Lihat bagian "Mengatasi masalah" dalam panduan ini. 4

5 5. Mencari atau men-download file instalan perangkat lunak Metode 1: Download dari HP Easy Start (Windows dan OS X) 1. Kunjungi 123.hp.com/laserjet, lalu klik Download. 2. Ikuti petunjuk dan perintah di layar untuk menyimpan file ke komputer. 3. Jalankan file perangkat lunak dari folder tempat menyimpan file, lalu lanjutkan dengan "6. Menginstal perangkat lunak". Metode 2: Download dari situs Web dukungan printer (Windows dan OS X) 1. Kunjungi 2. Pilih Software (Perangkat Lunak) dan drivers (driver). 3. Download perangkat lunak untuk model printer dan sistem operasi. 4. Jalankan file penginstalan dengan mengklik file.exe atau.zip jika perlu, lalu lanjutkan dengan "6. Menginstal perangkat lunak". Metode 3: Instal dari CD printer (hanya Windows) 1. Masukkan CD printer ke komputer. 2. Lanjutkan dengan "6. Menginstal perangkat lunak". 6. Menginstal perangkat lunak Solusi Windows 1. Penginstal perangkat lunak menemukan bahasa sistem operasi, lalu menampilkan menu utama program penginstalan dalam bahasa yang sama. Saat melakukan penginstalan dari CD, jika program penginstal tidak dimulai setelah 30 detik, telusuri drive CD pada komputer, lalu jalankan file SETUP.EXE. 2. Layar Software Selection (Pilihan Perangkat Lunak) merinci perangkat lunak yang akan diinstal. Penginstalan perangkat lunak yang direkomendasikan mencakup driver cetak dan perangkat lunak untuk semua fitur printer yang tersedia. Untuk menyesuaikan perangkat lunak yang diinstal, klik link Customize software selections (Sesuaikan pilihan perangkat lunak). Setelah selesai, klik tombol Next (Berikutnya). 3. Ikuti petunjuk di layar untuk menginstal perangkat lunak. 4. Bila diminta untuk memilih jenis sambungan, pilih pilihan yang tepat untuk jenis sambungan. Directly connect this computer using a USB cable (Sambungkan komputer ini secara langsung menggunakan kabel USB) Connect through a network (Sambungkan melalui jaringan) Help me set up a first-time wireless connection (Bantu saya mengkonfigurasi sambungan nirkabel untuk pertama kali) CATATAN: Saat menyambung melalui jaringan, cara termudah untuk menemukan printer adalah dengan memilih Automatically find my printer on the network (Temukan printer saya di jaringan secara otomatis). CATATAN: Untuk penginstalan nirkabel, tetapkan pilihan ke Help me set up a first-time wireless connection (Bantu saya mengkonfigurasi sambungan nirkabel untuk pertama kali), lalu pilih Yes, retrieve the wireless settings on my computer (Ya, ambil pengaturan nirkabel di komputer saya). Solusi OS X 1. Penginstal perangkat lunak menemukan bahasa sistem operasi, lalu menampilkan menu utama program penginstalan dalam bahasa yang sama. 2. Ikuti petunjuk di layar untuk menginstal perangkat lunak. Bila diminta, sambungkan printer menggunakan kabel yang sesuai untuk jenis sambungan, atau pastikan printer telah disiapkan untuk komunikasi nirkabel. 3. Pada akhir proses penginstalan perangkat lunak, gunakan HP Utility Setup Assistant (Bantuan Konfigurasi Utilitas HP) untuk mengkonfigurasi pilihan printer. 7. Pencetakan seluler dan nirkabel (opsional) Untuk mencetak dari ponsel atau tablet, sambungkan perangkat tersebut ke jaringan nirkabel yang juga digunakan untuk menyambungkan printer. Perangkat Apple ios (AirPrint): Buka item yang akan dicetak, lalu pilih ikon Action (Tindakan). Pilih Print (Cetak), pilih printer, lalu pilih Print (Cetak). Perangkat Android versi lebih baru (4.4 atau versi yang lebih baru): Buka item yang akan dicetak, lalu pilih tombol Menu. Pilih Print (Cetak), pilih printer, lalu pilih Print (Cetak). Perangkat tertentu mengharuskan Anda men-download aplikasi plugin HP Print Service dari Google Play Store. Perangkat Android versi lebih lama (4.3 atau versi yang lebih lama): Download aplikasi HP eprint dari Google Play Store. Windows Phone: Download aplikasi HP AiO Remote dari Windows Store. Selengkapnya Tentang Pencetakan Seluler Untuk mengetahui selengkapnya tentang pilihan pencetakan seluler lainnya, termasuk solusi tambahan eprint, pindai kode QR, atau lihat bagian "Pencetakan seluler" dalam panduan pengguna. Wi-Fi Direct WiFi Direct akan mengaktifkan pencetakan jarak dekat dari perangkat bergerak nirkabel secara langsung ke printer yang mengaktifkan WiFi Direct tanpa memerlukan sambungan ke jaringan atau Internet. Mengaktifkan Wi-Fi Direct 1. Sentuh tombol Connection Information (Informasi Sambungan). 2. Sentuh tombol Wi-Fi Direct OFF (Wi-Fi Jaringan TIDAK AKTIF). 3. Sentuh tombol Settings (Pengaturan). 4. Pilih item On/Off (Aktif/Tidak Aktif), lalu pilih On (Aktif). 5. Untuk pencetakan yang aman, pilih Security (Keamanan), lalu pilih On (Aktif). Catat frasa akses yang ditampilkan. Gunakan frasa akses tersebut untuk mengizinkan akses ke perangkat bergerak. Untuk membolehkan pencetakan yang tidak aman, pilih Security (Keamanan), lalu pilih Off (Tidak Aktif). Untuk informasi selengkapnya tentang pencetakan nirkabel dan pengaturan nirkabel, kunjungi 5

6 8. Mengatur HP eprint via (opsional) Gunakan HP eprint via untuk mencetak dokumen dengan mengirimnya sebagai lampiran ke alamat printer dari perangkat apa pun yang mendukung , bahkan dari perangkat di jaringan yang berbeda. Untuk menggunakan HP eprint via , printer harus memenuhi persyaratan ini: Printer harus disambungkan ke jaringan berkabel atau nirkabel dan memiliki akses Internet. HP Web Services harus diaktifkan pada printer dan printer harus terdaftar di HP Connected. Mengaktifkan HP Web Services CATATAN: Sebelum mengaktifkan HP Web Services, pastikan printer telah tersambung ke jaringan. 1. Sentuh tombol Apps (Aplikasi). 2. Di jendela Enable Web Services (Aktifkan Layanan Web), sentuh OK. Printer akan mengaktifkan Web Services (Layanan Web). Gunakan tombol Print (Cetak) untuk mencetak halaman informasi. Halaman informasi berisi kode printer yang diperlukan untuk mendaftarkan printer HP di HP Connected. 3. Kunjungi untuk membuat akun HP eprint dan menyelesaikan proses konfigurasi. Mengatasi Masalah Panduan pengguna Panduan pengguna mencakup informasi tentang penggunaan printer dan mengatasi masalah. Panduan pengguna tersedia pada CD printer dan web: 1. Kunjungi 2. Klik Manuals (Panduan). Untuk Windows, panduan pengguna akan disalin ke komputer saat penginstalan perangkat lunak yang direkomendasikan berlangsung. Windows XP, Windows Vista, dan Windows 7: Klik Start (Mulai), pilih Programs (Program) atau All Programs (Semua Program), pilih HP, pilih folder untuk printer HP, lalu pilih Help (Bantuan). Windows 8: Di layar Start (Mulai), klik kanan area kosong di layar, klik All Apps (Semua Aplikasi) pada panel aplikasi, klik ikon dengan nama printer, lalu pilih Help (Bantuan). Memeriksa pembaruan firmware 1. Di panel kontrol, geser layar panel kontrol, lalu sentuh tombol Setup (Konfigurasi). 2. Buka menu Service (Layanan). 3. Pilih LaserJet Update (Pembaruan LaserJet). 4. Pilih Check for Updates Now (Periksa Pembaruan Sekarang). Bantuan panel kontrol Sentuh tombol Help (Bantuan) topik bantuan. pada panel kontrol printer untuk mengakses Sumber dukungan tambahan Untuk bantuan menyeluruh tentang printer dari HP, kunjungi Mengatasi masalah Menemukan petunjuk konfigurasi tingkat lanjut Men-download pembaruan perangkat lunak Mengikuti forum dukungan Mencari informasi jaminan dan peraturan Mengakses sumber pencetakan seluler Sambungan jaringan berkabel (Ethernet) Pastikan printer telah tersambung ke port jaringan yang benar menggunakan kabel dengan panjang yang benar. Pastikan lampu di sebelah port jaringan telah menyala. Pastikan driver cetak telah diinstal di komputer. Uji sambungan jaringan dengan melakukan ping pada printer: Windows: Klik Start (Mulai) > Run (Jalankan). Ketik cmd, lalu tekan Enter. Ketik ping, ketik spasi, ketik alamat IP printer, lalu tekan Enter. Contoh alamat IP: OS X: Buka Network Utility (Utilitas Jaringan), lalu ketik alamat IP di jendela ping. Tekan Enter. Contoh alamat IP: Jika jendela menampilkan waktu respons (round-trip time), jaringan bekerja. Jika ping tidak berjalan, coba hidupkan ulang printer, lalu periksa kembali semua langkah sambungan. Sambungan jaringan nirkabel Pastikan kabel jaringan tidak tersambung. Printer tidak dapat menyambung ke jaringan nirkabel jika kabel jaringan tersambung. Pastikan printer dan router nirkabel telah diaktifkan dan memiliki daya. Pastikan juga sakelar nirkabel telah diaktifkan. Pastikan printer telah berada dalam jangkauan jaringan nirkabel. Untuk sebagian besar jaringan, printer harus berada dalam jarak 30 m (100 kaki) dari jalur akses nirkabel (router nirkabel). Pastikan driver cetak telah diinstal di komputer. Pastikan komputer dan printer telah tersambung ke jaringan nirkabel yang sama. Untuk Mac, pastikan router nirkabel mendukung Bonjour. Hidupkan ulang router nirkabel. Menjalankan pengujian diagnosis nirkabel 1. Di panel kontrol, geser layar panel kontrol, lalu sentuh tombol Setup (Konfigurasi). 2. Pilih Self Diagnostics (Diagnosis Mandiri), lalu pilih Run Wireless Test (Jalankan Pengujian Nirkabel). 6

7 Color LaserJet Pro M452dw 시작 설명서 English... 1 Bahasa Indonesia... 4 한국어... 7 ไทย...10 繁体中文 중요: 프린터 하드웨어 설치 포스터의 1~2단계 를 수행한 다음 3단계를 진행하십시오 제어판에서 초기 설정 프린터를 켠 후 초기화될 때까지 기다립니다. 제어판을 탐색하려면 터치, 스와이프, 스크롤 제스처를 사용합니다. 제어판에 표시되는 메시지에 따라 다음과 같은 설정을 구성합니다. 언어 위치 기본 설정 기본 설정에서 다음 옵션 중 하나를 선택합니다. 자가 관리: 설정 안내와 구성 단계 및 자동 업데이트를 포함하여 대부분의 사용자에게 최적화된 기본 설정입니다. IT 관리: 장비 관리성에 최적화된 기본 설정입니다. 설정은 초기 설정 후 모두 사용자 정의할 수 있습니다. 참고: 기본 설정을 변경하는 방법을 지시하는 페이지를 인쇄하려면 인쇄 정보 페이지를 선택하십시오. 참고: 도움말을 보려면 프린트 제어판의 도움말 버튼을 누르십시오. 4. 연결 방법을 선택하고 소프트웨어 설치를 준비합니다 프린터와 컴퓨터간 직접 USB 연결 내장 무선 네트워크 연결 A-B형 USB 케이블을 사용합니다. (모든 모델에 미포함). 1. 연결 정보 버튼을 터치합니다. 2. 네트워크 Wi-Fi 끄기 버튼을 터치합니다. 3. 설정 버튼을 터치합니다. 4. 무선 설정 마법사 항목을 터치합니다. 5. 목록에서 해당 네트워크 SSID를 선택합니다. SSID가 표시되지 않는 경우 SSID 입력을 터치하고 네트워크 SSID를 수동으로 입력합니다. 6. 키보드를 사용하여 암호를 입력한 다음 확인 버튼을 터치합니다. 7. 프린터가 네트워크 연결을 설정하는 동안 기다립니다. 버튼을 터치합니다. IP 주소가 표시되면 8. 연결 정보 네트워크 연결이 설정된 것입니다. 그렇지 않은 경우 몇 분 더 기다린 다음 다시 시도합니다. 소프트웨어 설치 중 사용할 IP 주소를 메모합니다. IP 주소 예: 컴퓨터에서 인쇄하려면 5. 소프트웨어 설치 파일을 찾거나 다운로드 를 진행합니다. 휴대전화나 태블릿에서만 인쇄하려면 7. 모바일 및 무선 인쇄 로 진행합니다. 참고: 소프트웨어를 설치하는 동안 네트워크를 통해 연결 옵션을 선택합니다. (Windows만 해당) Windows 1. 소프트웨어를 설치하기 전에 USB 케이블을 연결하지 마십시오. 이미 케이블이 연결되어 있는 경우 먼저 연결을 해제하십시오. 설치 과정 중에 케이블을 연결하라는 메시지가 표시됩니다 소프트웨어 설치 파일을 찾거나 다운로드 로 진행합니다. 참고: 소프트웨어를 설치하는 동안 USB 케이블을 사용하여 이 컴퓨터에 직접 연결 옵션을 선택합니다. (Windows만 해당) Mac 1. Mac의 경우, 소프트웨어를 설치하기 전에 USB 케이블을 컴퓨터와 프린터에 연결합니다 소프트웨어 설치 파일을 찾거나 다운로드 로 진행합니다. 유선(이더넷) 네트워크 연결 표준 네트워크 케이블을 사용합니다. (케이블 미포함) 1. 네트워크 케이블을 프린터와 네트워크에 연결합니다. 프린터에서 네트워크 주소를 받을 때까지 몇 분 대기합니다. 버튼을 터치합니다. IP 주소가 2. 제어판에서 연결 정보 표시되면 네트워크 연결이 설정된 것입니다. 그렇지 않은 경우 몇 분 더 기다린 다음 다시 시도합니다. 소프트웨어 설치 중 사용할 IP 주소를 메모합니다. IP 주소 예: IP 주소를 수동으로 구성하려면 IP 주소 수동으로 구성 을 참조하십시오 소프트웨어 설치 파일을 찾거나 다운로드 로 진행합니다. IP 주소 수동으로 구성 수동으로 IP 주소를 구성하는 방법에 대한 자세한 내용은 프린터 사용 설명서를 참조하십시오. 이 설명서의 문제 해결 섹션을 참조하십시오. 고: 소프트웨어를 설치하는 동안 네트워크를 통해 연결 참 옵션을 선택합니다. (Windows만 해당) 7

8 5. 소프트웨어설치파일을찾거나다운로드 방법 1: HP Easy Start 에서다운로드 (Windows 및 OS X) hp.com/laserjet 으로이동한다음다운로드를클릭합니다. 2. 화면에표시되는안내에따라컴퓨터에파일을저장합니다. 3. 파일이저장된폴더에서소프트웨어파일을실행하고다음단계를진행합니다. 6. 소프트웨어설치. 방법 3: 프린터 CD에서설치 (Windows만해당 ) 1. 컴퓨터에프린터 CD를넣습니다. 2. 다음단계를진행합니다. 6. 소프트웨어설치. 방법 2: 프린터지원웹사이트에서다운로드 (Windows 및 OS X) 1. 로이동합니다. 2. 소프트웨어및드라이버를선택합니다. 3. 해당프린터모델및운영체제에맞는소프트웨어를다운로드합니다. 4. 필요에따라.exe 또는.zip 파일을클릭하여설치파일을실행하고 6. 소프트웨어설치 를계속합니다. 6. 소프트웨어설치 Windows 솔루션 1. 소프트웨어설치프로그램에서운영체제의언어를감지한후설치프로그램의기본메뉴를동일한언어로표시합니다. CD 에서설치하는경우 30 초후에도설치프로그램이시작되지않으면컴퓨터의 CD 드라이브를검색하여이름이 SETUP.EXE 인파일을실행합니다. 2. 소프트웨어선택화면에설치할소프트웨어에대한세부정보가표시됩니다. 권장소프트웨어설치에는제공되는모든프린터기능을위한인쇄드라이버및소프트웨어가포함됩니다. 설치된소프트웨어를사용자정의하려면소프트웨어선택사용자정의링크를클릭합니다. 작업이끝나면다음버튼을클릭합니다. 3. 화면의지시에따라소프트웨어를설치합니다. 4. 연결유형을선택하라는메시지가표시되면연결유형에적합한옵션을선택합니다. USB 케이블을사용하여이컴퓨터에직접연결 네트워크를통해연결 최초무선연결설정지원참고 : 네트워크를통해연결할때프린터를검색하는가장쉬운방법은네트워크에서내프린터자동으로찾기를선택하는것입니다. 참고 : 무선설치의경우최초무선연결설정지원옵션을선택한다음 예, 내컴퓨터의무선설정을검색합니다 를선택합니다. OS X 솔루션 1. 소프트웨어설치프로그램에서운영체제의언어를감지한후설치프로그램의기본메뉴를동일한언어로표시합니다. 2. 화면의지시에따라소프트웨어를설치합니다. 알림이표시되면연결유형에맞는케이블을사용하여프린터를연결하거나, 프린터에서무선통신이가능한지확인합니다. 3. 소프트웨어설치과정마지막에 HP 유틸리티설정지원을사용하여프린터옵션을구성합니다. 7. 모바일및무선인쇄 ( 선택사항 ) 휴대폰이나태블릿에서인쇄하려면장치를프린터와동일한무선네트워크에연결합니다. Apple ios 장치 (AirPrint): 인쇄할항목을열고작업아이콘을선택합니다. 인쇄를선택하고프린터를선택한다음인쇄를선택합니다. 신규 Android 장치 (4.4 이상버전 ): 인쇄할항목을열고메뉴버튼을선택합니다. 인쇄를선택하고프린터를선택한다음인쇄를선택합니다. 일부장치의경우 Google Play 스토어에서 HP 인쇄서비스플러그인앱을다운로드해야합니다. 이전 Android 장치 (4.3 이하버전 ): Google Play 스토어에서 HP eprint 앱을다운로드합니다. Windows 폰 : Windows Store 에서 HP AiO Remote 앱을다운로드합니다. 모바일인쇄에대해자세히알아보기 추가 eprint 에솔루션을포함한기타모바일인쇄옵션에대한자세한내용은 QR 코드를스캔하거나사용설명서의 모바일인쇄 섹션을참조하십시오. Wi-Fi Direct Wi-Fi Direct는네트워크또는인터넷에연결할필요없이무선모바일 장치에서 Wi-Fi Direct 지원프린터로근접인쇄할수있도록지원합니다. Wi-Fi Direct 활성화 1. 연결정보 버튼을터치합니다. 2. 네트워크 Wi-Fi 끄기버튼을터치합니다. 3. 설정버튼을터치합니다. 4. 켜기 / 끄기항목을선택한다음켜기를선택합니다. 5. 보안인쇄의경우보안을선택한다음켜기를선택합니다. 표시되는 암호를메모합니다. 이암호를사용하여모바일장치에대한 액세스를허용합니다. 보안되지않은인쇄를허용하려면보안을선택한다음끄기를 선택합니다. 무선인쇄및무선설정에대한자세한내용은 에서확인하십시오. 8

9 8. 이메일을통한 HP eprint 설정 ( 선택사항 ) 이메일을통한 HP eprint 를사용하면장치가동일한네트워크상에없어도이메일을사용할수있는모든장치에서프린터의이메일주소로문서를첨부파일로전송하여인쇄할수있습니다. 이메일을통한 HP eprint 를사용하려면프린터가다음요구사항을충족해야합니다. 프린터가유선또는무선네트워크에연결되어있고인터넷에접속되어야합니다. 프린터에 HP 웹서비스가활성화되어있어야하며, HP Connected 에프린터가등록되어있어야합니다. HP 웹서비스활성화참고 : HP 웹서비스를활성화하기전에컴퓨터가네트워크에연결되어있는지확인하십시오. 1. 앱버튼을터치합니다. 2. 웹서비스활성화화면에서확인을터치합니다. 프린터가웹서비스를활성화합니다. 인쇄버튼을사용하여정보페이지를인쇄합니다. 정보페이지에는 HP 프린터를 HP Connected 에등록하는데사용되는프린터코드가있습니다 으로이동하여 HP eprint 계정을만들고설정과정을완료합니다. 문제해결 사용설명서 사용설명서는프린터사용법및문제해결정보를포함합니다. 프린터 CD 및웹에서제공됩니다 로이동합니다. 2. 설명서를클릭합니다. Windows의경우권장소프트웨어를설치하는동안사용설명 서가컴퓨터에복사됩니다. Windows XP, Windows Vista 및 Windows 7: 시작을클릭하고, 프로그램또는모든프로그램, HP를차례로 선택하고, HP 프린터폴더를선택한후도움말을선택합니다. Windows 8: 시작화면에서화면의빈공간을마우스오른쪽버튼으로클릭하고, 앱표시줄에서모든앱을클릭한후, 프린터이름이있는아이콘을 클릭하고도움말을클릭합니다. 펌웨어업데이트확인 1. 제어판에서제어판화면을스와이프하고설정 버튼을 터치합니다. 2. 서비스메뉴를엽니다. 3. LaserJet 업데이트를선택합니다. 4. 지금업데이트확인을선택합니다. 제어판도움말도움말을보려면프린트제어판의도움말버튼을누르십시오. 추가지원리소스프린터에대한모든것을포함하는 HP 도움말은 에서확인하십시오. 문제해결 고급구성지침찾기 소프트웨어업데이트다운로드 지원포럼가입 보증및규정정보찾기 모바일인쇄리소스액세스 유선 ( 이더넷 ) 네트워크연결 프린터가올바른길이의케이블을사용하여올바른네트워크포트에연결되어있는지확인합니다. 네트워크포트옆에있는표시등이켜져있는지확인합니다. 프린터드라이버가컴퓨터에설치되어있는지확인합니다. 프린터에 ping 을수행하여네트워크연결을테스트합니다. Windows: 시작 > 실행을클릭합니다. cmd 를입력하고 Enter 를누릅니다. ping, 공백, 프린터 IP 주소를차례로입력한다음 Enter 를누릅니다. IP 주소예 : OS X: 네트워크유틸리티를열고 ping 창에 IP 주소를입력합니다. Enter 를누릅니다. IP 주소예 : 창에왕복시간이표시되면네트워크가작동중입니다. ping 이작동하지않는경우, 프린터를재시작하고모든연결단계를다시확인합니다. 무선네트워크연결 네트워크케이블이연결되어있지않은지확인합니다. 네트워크케이블이연결되어있는경우프린터가무선네트워크에연결할수없습니다. 프린터및무선라우터가켜져있고전원에이상이없는지확인합니다. 무선스위치가켜져있는지도확인합니다. 프린터가무선네트워크범위내에있는지확인합니다. 대부분의네트워크에서는프린터가무선액세스지점 ( 무선라우터 ) 의 30m(100ft) 이내에있어야합니다. 프린터드라이버가컴퓨터에설치되어있는지확인합니다. 컴퓨터및프린터가동일한무선네트워크에연결되어있는지확인합니다. Mac 의경우무선라우터에서 Bonjour 를지원하는지확인합니다. 무선라우터를재시작합니다. 무선진단테스트수행 1. 제어판에서제어판화면을스와이프하고설정버튼을터치합니다. 2. 자가진단을선택한다음무선테스트실행을선택합니다. 9

10 English... 1 Bahasa Indonesia... 4 한국어... 7 ไทย 繁体中文

11

12 8. 12

13 English... 1 Color LaserJet Pro M452dw 入門指南 Bahasa Indonesia... 4 한국어... 7 ไทย 重要事項 依照印表機硬體設定海 報的 步驟 1-2 進行後 再繼續執行步驟 3 繁体中文 控制面板上的初始設定 開啟印表機電源後 等待印表機初始化 若要瀏覽控制面板 請使用點選 撥動和 捲動手勢 依照控制面板上的提示設定下列設定 語言 位置 預設值 在 預設值 下 選擇其中一個選項 自我管理 適合大部分使用者的最佳化預設值 包括引導式設定和組態步驟以 及自動更新 IT 管理 適合機群管理功能的最佳化預設值 設定值在初始設定之後完全可自訂 註 選擇 列印資訊頁 以列印指示如何變更預設設定的頁面 註 點選印表機控制面板上的 說明 按鈕以存取說明主題 4. 選擇連線方法並準備進行軟體安裝 直接在印表機與電腦之間連接的 USB 連線 內建無線網路連線 使用 A 對 B 型 USB 纜線 僅随附於部分機型 Windows 1. 請勿在安裝軟體之前連接 USB 纜線 如果已連接纜線 請 拔除纜線後再繼續 安裝程序會在適當時間提示您接上連 接線 2. 繼續執行 5. 找出或下載軟體安裝檔 註 進行軟體安裝時 選擇 使用 USB 纜線直接連接這部 電腦 的選項 僅限 Windows Mac 1. 對於 Mac 先連接電腦與印表機之間的 USB 纜線 再進行 軟體安裝 2. 繼續執行 5. 找出或下載軟體安裝檔 9. 點選 連線資訊 按扭 點選 Network Wi-Fi OFF 網路 Wi-Fi 關閉 按鈕 點選 設定 按鈕 點選 Wireless Setup Wizard 無線設定精靈 項目 從清單中選擇正確的網路 SSID 如果您沒有看到 SSID 請點選 Enter SSID 輸入 SSID 然後手動提供網路 SSID 使用鍵盤輸入複雜密碼 然後點選 確定 按鈕 等待印表機建立網路連線 按鈕 若列出 IP 位址 則已建立 點選 連線資訊 網路連線 若未列出 請等候幾分鐘後再試一次 請記下 IP 位址以便在安裝軟體時使用 IP 位址範例 若要從電腦列印 請繼續執行 5. 找出或下載軟體安裝 檔 若要單純從電話或平板電腦列印 請繼續執行 7. 行動列印和無線列印 註 進行軟體安裝時 選擇 透過網路連接 的選項 僅限 Windows 有線 乙太網路 網路連線 使用標準網路線 並未隨附纜線 1. 將網路線連接至印表機與網路 等待幾分鐘 讓印表機取 得網路位址 按鈕 若列出 IP 2. 在控制面板上 點選 連線資訊 位址 則已建立網路連線 若未列出 請等候幾分鐘後再 試一次 請記下 IP 位址以便在安裝軟體時使用 IP 位址範例 若要手動設定 IP 位址 請參閱 手動設定 IP 位址 3. 繼續執行 5. 找出或下載軟體安裝檔 手動設定 IP 位址 請參閱印表機使用指南以取得有關手動設定 IP 位址的詳細資訊 請參閱本指南的 疑難排解 一節 進行軟體安裝時 選擇 透過網路連接 的選項 註 僅限 Windows 13

14 5. 找出或下載軟體安裝檔 方法 1: 從 HP Easy Start 下載 (Windows 和 OS X) 1. 前往 123.hp.com/laserjet, 然後按一下 Download ( 下載 ) 2. 依照螢幕上的指示與提示, 將檔案儲存至電腦 3. 從儲存軟體檔案的資料夾啟動軟體檔案, 然後繼續執行 6. 安裝軟體 方法 3: 從印表機光碟安裝 ( 僅限 Windows) 1. 將印表機光碟插入電腦中 2. 繼續執行 6. 安裝軟體 方法 2: 從印表機支援網站下載 (Windows 和 OS X) 1. 前往 2. 選擇 Software and drivers( 軟體與驅動程式 ) 3. 下載適用於您的印表機型號和作業系統的軟體 4. 視需要按一下.exe 或.zip 檔案以啟動安裝檔, 然後繼續執行 6. 安裝軟體 6. 安裝軟體 Windows 解決方案 1. 軟體安裝程式會偵測作業系統的語言, 然後以相同的語言顯示安裝程式的主功能表 從光碟安裝時, 如果安裝程式未在 30 秒鐘之後啟動, 請瀏覽電腦上的 CD 光碟機, 並啟動名稱為 SETUP.EXE 的檔案 2. 軟體選擇 畫面會詳細說明要安裝的軟體 建議的軟體安裝包括所有可用印表機功能的列印驅動程式及軟體 若要自訂已安裝的軟體, 請按一下 自訂軟體選擇 連結 完成時, 按一下 下一步 按鈕 3. 依照螢幕上的指示安裝軟體 4. 出現選取連線類型的提示時, 選擇適合連線類型的選項 : 使用 USB 纜線直接連接這部電腦 透過網路連接 協助我設定第一次無線連線註 : 透過網路連接時, 偵測印表機的最輕鬆方式就是選擇 Automatically find my printer on the network ( 自動在網路上尋找我的印表機 ) 註 : 進行無線安裝時, 選擇 協助我設定第一次無線連線 的選項, 然後選擇 Yes, retrieve the wireless settings on my computer ( 是, 擷取電腦上的無線設定 ) OS X 解決方案 1. 軟體安裝程式會偵測作業系統的語言, 然後以相同的語言顯示安裝程式的主功能表 2. 依照螢幕上的指示安裝軟體 出現提示時, 使用適合連線類型的纜線連接印表機, 或確定印表機已完成無線通訊的準備 3. 在軟體安裝程序結束時, 使用 HP Utility 設定小幫手來設定印表機選項 7. 行動列印和無線列印 ( 選用 ) 若要從電話或平板電腦列印, 請將裝置連接至印表機所在的同一個無線網路 Apple ios 裝置 (AirPrint): 開啟要列印的項目, 然後選擇動作圖示 選擇 列印, 選擇印表機, 然後選擇 列印 較新的 Android 裝置 (4.4 或更新版本 ): 開啟要列印的項目, 然後選擇功能表按鈕 選擇 列印, 選擇印表機, 然後選擇 列印 有些裝置需要從 Google Play 商店下載 HP Print Service 外掛程式應用程式 較舊的 Android 裝置 (4.3 或更舊版本 ): 從 Google Play 商店下載 HP eprint 應用程式 Windows Phone: 從 Windows 市集下載 HP AiO Remote 應用程式 進一步了解行動列印 若要進一步了解其他行動列印選項 ( 包括其他 eprint 解決方案 ), 請掃描 QR 碼, 或參閱使用指南的 行動列印 一節 Wi-Fi Direct Wi-Fi Direct 可讓您直接從無線行動裝置, 對具備 Wi-Fi Direct 功能的印 表機進行近距離列印, 而不需要連接至網路或網際網路 啟用 Wi-Fi Direct 1. 點選 連線資訊 按鈕 2. 點選 Wi-Fi Direct OFF (Wi-Fi Direct 關閉 ) 按鈕 3. 點選 設定 按鈕 4. 選擇 On/Off ( 開啟 / 關閉 ) 項目, 然後選擇 On ( 開啟 ) 5. 如需進行安全列印, 請選擇 Security ( 安全性 ), 然後選擇 On ( 開啟 ) 記下顯示的複雜密碼 使用此複雜密碼以允許 存取行動裝置 若要允許無安全保護的列印, 請選擇 Security ( 安全性 ), 然 後選擇 Off ( 關閉 ) 如需無線列印及無線設定的詳細資訊, 請前往 14

15 8. 設定 HP eprint via ( 選用 ) 使用 HP eprint via , 您只要在任何具備電子郵件功能的裝置上, 將文件當做電子郵件附件傳送至印表機的電子郵件地址即可列印該文件, 即使您使用的裝置不在同一個網路上也沒問題 若要使用 HP eprint via , 印表機必須符合以下要求 : 印表機必須連線到有線或無線網路, 且必須能夠存取網際網路 印表機必須啟用 HP Web 服務, 而且您必須已向 HP Connected 註冊印表機 啟用 HP Web 服務註 : 啟用 HP Web 服務之前, 請確認印表機已連接至網路 1. 點選 應用程式 按鈕 2. 在 啟用 Web 服務 畫面中, 點選 確定 印表機隨即啟用 Web 服務 使用 列印 按鈕列印資訊頁 資訊頁包含向 HP Connected 註冊 HP 印表機所需的印表機代碼 3. 前往 建立 HP eprint 帳戶並完成設定程序 疑難排解 使用指南使用指南包含印表機使用方式及疑難排解資訊 這可在印表機光碟或網路上取得 : 1. 前往 2. 按一下 Manuals ( 手冊 ) 對於 Windows, 使用指南會在進行建議的軟體安裝時複製到電腦 Windows XP Windows Vista 和 Windows 7: 按一下 開始, 依序選擇 程式集 或 所有程式 HP HP 印表機的資料夾, 然後選擇 說明 Windows 8: 在 開始 畫面中, 以滑鼠右鍵按一下畫面中的空白區域, 按一下應用程式列的 所有應用程式, 然後按一下顯示印表機名稱的圖示並選擇 說明 檢查韌體更新 1. 在控制面板上, 撥動控制面板畫面, 然後點選 設定 按鈕 2. 開啟維修功能表 3. 選擇 LaserJet 更新 4. 選擇 立即檢查更新 控制面板說明點選印表機控制面板上的 說明 按鈕以存取說明主題 其他支援資源如需包含印表機所有相關資訊的 HP 說明, 請前往 解決問題 尋找進階組態設定指示 下載軟體更新 加入支援論壇 尋找保固及法規資訊 存取行動列印資源 有線 ( 乙太網路 ) 網路連線 確認印表機以長度合適的纜線連接到正確的網路連接埠 確認網路連接埠旁邊的指示燈已亮起 確認電腦已安裝列印驅動程式 使用 Ping 指令偵測印表機以測試網路連線 : Windows: 按一下 開始 > 執行 輸入 cmd, 並按下 Enter 依序輸入 ping 空格 印表機 IP 位址, 然後按下 Enter IP 位址範例 : OS X: 開啟 網路工具程式, 並在 Ping 窗格中輸入 IP 位址 按下 Enter IP 位址範例 : 如果視窗顯示往返時間, 表示網路運作正常 如果 Ping 沒有作用, 請嘗試重新啟動印表機, 再重新檢查所有的連線步驟 無線網路連線 確認未連接網路線 當網路線已連接時, 印表機無法連接至無線網路 確認印表機和無線路由器已開啟且接通電源 此外, 確定無線開關已開啟 確認印表機位於無線網路範圍內 對多數網路而言, 印表機必須是在距離無線存取點 ( 無線路由器 )30 公尺 (100 英呎 ) 以內的位置 確認電腦已安裝列印驅動程式 確認電腦和印表機連接至相同的無線網路 若是使用 Mac, 請確認無線路由器支援 Bonjour 重新啟動無線路由器 執行無線診斷測試 1. 在控制面板上, 撥動控制面板畫面, 然後點選 設定 按鈕 2. 選擇 Self Diagnostics ( 自我診斷 ), 然後選擇 Run Wireless Test ( 執行無線測試 ) 15

16 Copyright 2015 HP Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Trademark Credits Windows is a U.S. registered trademark of Microsoft Corporation. FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase separation between equipment and receiver. Connect equipment to an outlet on a circuit different from that to which the receiver is located. Consult your dealer or an experienced radio/tv technician. Any changes or modifications to the product that are not expressly approved by HP could void the user s authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. For more regulatory information, see the electronic user guide. HP shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.