Contents ProntoSIL HPLC Columns Page ProntoSIL C18-EPS Reversed-Phase HPLC Columns ProntoSIL C30-EPS Reversed-Phase HPLC Columns

Transcription

1 ProntoSIL HPLC Columns

2 Contents ProntoSIL HPLC Columns Page ProntoSIL C18-EPS Reversed-Phase HPLC Columns ProntoSIL C30-EPS Reversed-Phase HPLC Columns ProntoSIL Chiral AX HPLC Columns High Performance ProntoSIL HPLC Columns Application Application Application Application Application Application HPLC Columns( 고정상의종류, 물리적성격 ) Ordering Informations

3 ProntoSIL C18-EPS Reversed-Phase HPLC Columns Using New Polar Embedded Phases to Optimize Reversed Phase Separations Figure 1 High Polarity Stationary Phases Offer Alternate Selectivity to Base Deactivated Phases Column A: Base deactivated C18 column with low polarity Column B: C18 column with high polarity due to silanol activity 1 2 Time (min) α = 2.08 α = 3.48 Introduction Base deactivated stationary phases have been a real asset to chromatographers who develop HPLC separations of polar compounds. Columns packed with these base-deactivated phases provide better peak shape, increased column efficiency, and improved lot-to-lot reproducibility, especially when separating bases. However, there are occasions when a typical base deactivated phase may not provide an optimum separation. Manufacturers of base deactivated columns try to minimize interactions between polar solutes and silanol groups on the surface of the stationary phase support. This produces stationary phases with low polarity and these low polarity phases will all have similar selectivity for polar compounds. This means that if one brand of base deactivated column lacks selectivity to adequately separate a pair of polar solutes, other brands of base deacti- Figure 2 Polar Embedded Phases vated columns will also probably lack adequate selectivity. To optimize the separation, a more polar stationary phase may be necessary. Unfortunately, stationary phases that have polar characteristics due to silanol activity will often exhibit poor peak shape and uncertain reproducibility when separating polar compounds (Figure 1). To solve this problem, column manufacturers have developed a new type of base deactivated stationary phase with polar groups, such as amides or carbamates, embedded in the bonded phase (Figure 2). These polar embedded phases provide polar selectivity without the poor chromatographic performance associated with stationary phases that have high silanol activity Mobile Phase : 55% CH 3 OH 45% H 2 O Sample : Analytes 1. Acetylsalicylic acid 2. Salicylic acid 2 alkyl bonded phase Polar Group Examples of Polar Embedded Phases: Chromegabond ProTech-RP Discovery RP-Amide C16 Hypersil HyPURITY Advance Keystone Prism ProntoSIL C18-EPS Symmetry Shield Zorbax Bonus-RP Column B (significant silanol activity) provides greater selectivity than Column A for these polar solutes but at a cost of poorer peak shape for salicylic acid. Silica By embedding a polar group, such as an amide or carbamate, in the bonded phase a new type of base deactivated column with polar selectivity can be created. 04

4 Strategy for Developing Reversed Phase Separations of Ionic Compounds Table 1 provides a brief outline of a typical strategy used to develop an isocratic separation of polar compounds. As mentioned before, typical base deactivated columns sometimes fail to provide adequate selectivity for mixtures of polar compounds. This is where polar embedded phases should be used. The polar characteristics of these special base deactivated columns will often provide significantly better selectivity for mixtures of acids and bases. Therefore, if during the process of developing a separation you find that a typical C18 or C8 column does not provide adequate selectivity, your next step should be to select a polar embedded phase column to evaluate. Table 1 Strategy for Developing Reversed Phase Separations of Polar Compounds Select a base deactivated C18 or C8 column. Use a mobile phase consisting of acetonitrile and M potassium phosphate at a ph less than 3.0. Adjust the amount of acetonitrile in the mobile phase until the k values of all peaks are between 1 and 10. Evaluate the selectivity, and if it is unacceptable, (i.e., not all peaks of interest are adequately separated), substitute methanol for acetonitrile and again evaluate selectivity. Figure 4 will help you calculate the amount of methanol needed in the mobile phase to keep the elution strength constant. If selectivity is still unacceptable, choose a different stationary phase to evaluate. This can be a different brand of C18, but your best bet is to try a different bonded phase chemistry such as CN, Phenyl, or a polar embedded phase. Once the selectivity is acceptable, optimize the separation by adjusting the mobile phase strength (% organic solvent composition) and flow rate until all peaks are adequately separated (Rs > 1.5) and the system back pressure and overall separation time is suitable for the application. In a rigorous method development process, mobile phase ph, mobile phase additives (buffer concentration, ion pair reagents, amine modifiers, etc.), column temperature, and column configuration should also be evaluated and optimized. Figure 3 Solvent Elution Strength Comparison Figure 4 Polar Embedded Phases Offer Alternate Selectivity to Typical Base Deactivated Phases % Acetonitrile % Methanol Typical base deactivated column (ProntoSIL-C18H) Mobile Phase: Sample: 6 65% Acetonitrile 35% M Phosphate buffer, ph Uracil 2. Pyridine 3. Phenol 4. N,N-Dimethylaniline 5. p-butylbenzoic acid 6. Toluene Time (min) 2 Base Acid Base Polar embedded phase column (ProntoSIL C18-EPS) Acid Acetonitrile is a stronger solvent than methanol for reversed phase HPLC. This nomograph will help you keep the mobile phase elution strength constant when you switch from acetonitrile to methanol. For example, you will need about 62% methanol in the mobile phase to equal the eluting strength of 50% acetonitrile Time (min) In general, polar embedded phases will retain acids longer and bases slightly less than typical base deactivated columns. 05

5 Using The Polar Selectivity of Polar Embedded Phases to Optimize a Separation Columns packed with polar embedded phases are used in the same way as typical reversed phase columns and the separation strategy outlined in Table 1 is also appropriate for these columns. However, you should expect significant differences in selectivity from polar embedded phases due to their polar selectivity. Figure 6 Subtle Differences in Stationary Phase Selectivity Can Be Useful in Optimizing HPLC Separations ,5 6 Typical C18 base deactivated column 7 The polar selectivity of polar embedded phases comes from the interaction between the amide or carbamate group and polar solutes. In general you can expect that acidic compounds will be retained longer and basic compounds will be retained slightly less on polar embedded phases compared to typical reversed phase columns (Figure 4). Sometimes the selectivity differences can be dramatic, as shown in Figure 5, and sometimes they may be more subtle but still significant in optimizing a separations, as shown in Figure 6. FIGURE 5 Polar Embedded Phases Can Offer Dramatic Improvements in Selectivity Hypersil BDS C18 α = Time (min) 1 Polar embedded phase with enhanced polar selectivity (ProntoSIL C18 EPS) Mobile Phase: Sample: Time (min) % Acetonitrile 50% Water DNPH s of Aldehydes and Ketones 1. DNPH 2. Formaldehyde 3. Acetaldehyde 4. Acetone 5. Acroleine 6. Propanale 7. Butanale The polar selectivity offered by polar embedded phases will often provide a better separation. In this separation of DNPH s of aldehydes and ketones, compounds 4 and 5 co-elute on a typical base deactivated phase, but are well separated on a polar embedded phase ProntoSIL C18 EPS α = Time (min) Mobile Phase: Sample: Time (min) 65% CH 3 CN 35% Phosphate buffer, ph N,N-Dimethylaniline 2. p-butylbenzoic acid The ProntoSIL C18-EPS with enhanced polar selectivity provides significantly better selectivity for this pair of polar solutes than a typical base deactivated column (Hypersil BDS C18). Improved Peak Shape Most polar embedded phases use high purity silica as the stationary phase support and thoroughly cover the silica with bonded phase to reduce interaction between acidic silanols and polar solutes. This in itself would produce a stationary phase with good peak shape for basic compounds, but polar embedded phases also have the advantage of further deactivating the stationary phase support by means of the amide or carbamate groups. Although the mechanism is not fully understood, the prevailing view is that the polar embedded groups interact with unbonded silanols on the silica stationary phase support and thereby block them from interacting with polar solutes. The effect is similar to adding an amine modifier to the mobile phase. This polar shielding, as some manufacturers call it, gives these phases excellent peak shape for basic compounds over a broad ph range (Figure 7). Figure 7 Polar Embedded Phases Provide Excellent Peak Shape for Basic Compounds Mobile Phase: Analyte: 80% Methanol, 20% M Phosphate buffer, ph 6.0 Amitriptyline Hypersil BDS C18 ProntoSIL C18 EPS The amide group of the ProntoSIL C18-EPS shields the silica surface and prevents solutes from interacting with silanol groups. The result is exceptionally good peak shape for even difficult basic compounds. 06

6 Figure 8 Phase Collapse Figure 10 Bonded Phase on the ProntoSIL C18-EPS is Secured Through Dual Siloxane Bonds Fully Extended Alkyl Phase ProntoSIL C18 EPS with Dual Siloxane Bonds Silica Support Si O Si Polar C18 Phase Si O Si Polar C18 Phase Si O CH3 Si O CH3 Dual bonds resist acid hydrolysis Bonded phase unaffected Silica Surface Typical Bonded Phase H 2 O Organic Solvent Silica Support CH 3 Si OS i C18 Phase CH 3 Si OS i C18 Phase Phase Collapse CH 3 Acid hydrolysis cleaves siloxane bond CH 3 Bonded phase lost Acid hydrolysis of the siloxane bond and the resulting loss of bonded phase (i.e., C18 Phase) is one of the major reasons for column failure. ProntoSIL C18-EPS uses unique bonding chemistry to secure the polar C18 phase to the silica support through dual siloxane bonds. The dual bonding inhibits the loss of bonded phase and makes these columns unusually stable. When operating with less than 10% organic modifier in the mobile phase, typical C18 and C8 phases are susceptible to phase collapse. Polar embedded phases do not have this problem and are preferred over typical base deactivated phases for high aqueous mobile phase conditions. Figure 9 Comparison of Retention of Some Popular Polar Embedded Phases 1 1 Column: 4.6 x 150 mm Mobile Phase: 50% CH 3 CN 50% H2O Flow Rate: Sample: Silica Surface 1.0 ml/min ProntoSIL C18-EPS Symmetry Shield C Discovery Amide 7 Zorbax Bonus RP Formaldehyde 5. Propanale 2. Acetaldehyde 6. Crotonaldehyde 3. Acetone 7. Butylraldehyde 4. Acroleine Most polar embedded phase columns are less hydrophobic, and thus less retentive than typical reversed phase columns. ProntoSIL C18-EPS, however, is an exception and provides comparable retention to other C18 phases. In this example, we see that ProntoSIL C18-EPS is the most retentive of these four polar embedded phases. 6 7 Polar Embedded Phases Are Preferred for High Aqueous Mobile Phase Conditions The alkyl bonded phase of typical C18 and C8 columns undergo what many researchers call phase collapse, or matting, when operating with less than 10% organic modifier in the mobile phase (Figure 8). As phase collapse progresses, the availability of the alkyl phase to interact with solutes decreases and retention time decreases. Polar embedded phases can be used with high aqueous mobile phases without the problem of phase collapse. The polar embedded groups permit the stationary phase surface to remain wet even under 100% aqueous mobile phase conditions. This keeps the bonded phase fully extended into the mobile phase, eliminates phase collapse, and facilitates the retention of highly water soluble compounds that may be poorly retained on typical reversed phase columns. Ion pair reagents can be avoided so that chromatographic conditions are simpler and methods are more rugged. Retention Comparison In general, polar embedded phase columns are less hydrophobic and therefore less retentive than typical reversed phase columns. ProntoSIL C18-EPS, however, is an exception. It provides similar retention as other C18 phases for neutral and hydrophobic compounds and slightly more retention for some highly water soluble compounds. Figure 9 provides a comparison of retention for four popular polar embedded phases. Bonded Phase Stability There is no reason to believe that polar embedded phases are any less stable than typical C18 and C8 phases. Most manufacturers report stability data to support this. One column, Zorbax Bonus RP, uses unique silanes with bulky side groups to add stability to its bonded phase. Another column, ProntoSIL C18-EPS, uses dual siloxane bonds to increase bonded phase stability and actually demonstrates much greater durability than other C18 phases as well as other polar embedded phases (Figure 10). The next time you encounter poor selectivity while trying to separate polar solutes on a base deactivated phase, try one of these new polar embedded phases. You will be more likely to achieve a satisfactory separation with the polar embedded phase than with another brand of base deactivated column. 07

7 ProntoSIL C30-EPS Reversed-Phase HPLC Columns Unique planar selectivity for carotenoids and structural isomers Excellent reproducibility Multi-valent silane bonding for enhanced stability Reversed Phase HPLC Columns for the Separation of Hydrophobic Structural Isomers ProntoSIL C30 HPLC columns are particularly recommended for the separation of hydrophobic, long-chain, structural isomers. They are often a better alternative to normal phase columns for the separation of isomers since they are not as sensitive as normal phase columns to water content of the mobile phase and are not as susceptible to column fouling. ProntoSIL C30 columns show significantly greater shape selectivity compared to C18 phases due to their rigid, highly ordered C30 alkyl groups (Figure 6). This shape selectivity advantage makes them the ideal HPLC column to use for the separation of carotenoids (Figure 7) and tocopherol derivatives (Figure 8). For best performance, C30 columns should be used at ambient temperature or lower. At elevated temperatures, the C30 alkyl chains will become less ordered and lose their shape selectivity (Figure 9). In addition, C30 phases should be used with mobile phases containing at least 20% organic modifier to avoid phase collapse. Although you can expect lower plate count on C30 phases compared to C18 phases, the ability of the C30 phases to separate isomers that are not possible to separate on C18 phases make them an attractive choice for many applications. C30 phases have been successfully used for the analysis of plant extracts, food, and biological tissues that contain structurally different carotenoids and mixtures of geometricisomers. They are also commonly used for separating stereoisomers of vitamin E and vitamin A, and for the separation of PAHs. Figure 6 Comparison of C30 and C18 Phases for the Separation of Lutein Stereoisomers Figure 7 HPLC Separation of Carotenoids C18 Mobile Phase: 76% Acetone 24% H 2 O C30 Mobile Phase: 85% Acetone 15% H 2 O 1, Time (min) ,5 4 5 all-trans 9-cis Figure 8 HPLC Separation of Tocopherol Isomers Column: ProntoSIL C30,4.6 x 250 mm Mobile Phase: 96% Methanol,4% Water Flow Rate: 0.9 ml/min Temperature: 25 C Sample: δ-tocopherol γ-tocopherol 2 β-tocopherol α-tocopherol Time (min) Flow Rate: Detector: Sample: 1 ml/min UV at 450 nm 1) 13-Z lutein, 2) 13 -Z lutein, 3) all-e-lutein 4) 9-Z lutein, 5) 9 -Z lutein By courtesy of Prof.Dr.K.Albert et al, University Tuebingen,Germany. Column: ProntoSIL C30,4.6 x 250 mm Mobile Phase: 80% Methanol,20% TBME Flow Rate: 1.4 ml/min Temperature: 20 C Time (min) 08

8 Figure 9 The Effect of Temperature on Shape Selectivity of C30 Phases 40 C Figure 10 HPLC Separation of Steroids (Metabolites of Norethisterone Acetate) 3 30 C C Time (min) Mobile Phase: Flow Rate: Detection: Sample: 50% to 100% B,60 minutes A:Water B:Methanol 0.6 ml/min UV at 260 nm 2. p-butylbenzoic acid 1) 6-Keto-Norethisterone acetate 2) Estradiol 3) Norethisterone acetate 13-cis all-trans 9-cis 10 C Time (min) By courtesy of Prof.Dr.K.Albert et al, University Tuebingen,Germany. ProntoSIL C30 Ordering Information Specifications Stationary Phase Support: Spherical,ultra-pure, Type B silica 3 and 5 micron particle size 200 Angstrom pore size 200 m2/gram surface area Bonded Phase: Polymeric bonding chemistry, non-endcapped C30 (Triacontylsilane) 18.5% carbon load Dimensions (mm) Particle Size (μm) Part Number 2.0 x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS x H300PS050 Guard Cartridges (Guard Cartridge Holder required) 4.0 x 10 (5 pk) H300PS x 10 (5 pk) H300PS050 Guard Cartridge Holder

9 ProntoSIL 300Å Wide Pore These wide pore phases are recommended for the separation of proteins and peptides. As with all ProntoSIL phases, ultra pure silica is used for the stationary phase support, and the latest bonding technology is used to provide rugged, reliable separations. C18, C8, and C4 bonded phase are available. Figure 15 Separation of Tryptic Digest of Casein ProntoSIL C18 300H Column: 4.6 x 75 mm, 3.5 μm Mobile Phase: Gradient: 0-40% B, 24 min A: Water with 0.1% TFA B: 70% Acetonitrile 30% Water with 0.1% TFA Flow Rate: 1.0 ml/min Detector: UV, 220nm Temperature: 30 C Sample: Tryptic digest of casein Figure 14 Separation of Peptides on ProntoSIL C18 300H ProntoSIL C18 300H Time (min) High efficiency ProntoSIL C18 300H 3 micron material packed in a short column provides high speed, high resolution separation of tryptic digests. 5 Specifications for ProntoSIL 300Å Phases 1 3 Phase End capped Particle Size (μm) Pore Size Å Surface Area (m2/g) Carbon Load (%) 4 6 C H yes 3, C8 300 SH yes 3, C4 300 yes 3, Time (min) Column: 4.6 x 250 mm, 5 μm Mobile Phase: Gradient: % B, 30 min A: Water with 0.1% TFA B: 70% Acetonitrile 30% Water with 0.1% TFA Flow Rate: 1.5 ml/min Detector: UV, 220nm Temperature: 30 C Sample: 1.Oxytocin 4. Eledoisi 2. Bradykinin 5. Neurotensin 3. Angiotensin II 6. Angiotensin I The wide pore ProntoSIL C18 300H column is recommended for the separation of peptides. ProntoSIL 300Å Wide Pore Ordering Information Dimensions (mm) Particle Size (μm) C H C8 300 SH C x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS x K185PS K080PS K040PS050 Guard Columns* 2.0 x K185PS K080PS K040PS x K185PS K080PS K040PS050 Guard Cartridge Holder Set *Requires Hardware Kit 10

10 ProntoSIL Chiral AX HPLC Columns Multi-mode separation: Reversed phase, non-aqueous reversed phase (NARP), normal phase Two complementary phases: Separate enantiomers in the order R, S or S, R Stability: ph stable from 2-8 High loadability: Up to 50 mg sample per gram of stationary phase ProntoSIL Chiral AX Multi-modal, Complementary Chiral HPLC Columns The new ProntoSIL Chiral AX HPLC columns from Bischoff Chromatography can be described in one word; versatile. With Chiral AX, you now have the versatility to use any mobile phase, aqueous or organic, reversed phase or normal phase. Furthermore, Chiral AX now offers ph stability for chiral separations similar to that obtained with standard reversed phase columns. Since the objective of many chiral separations is isolation and purification of one enantiomer, Chiral AX offers both high loadability and the option of reversing elution order by using one of two complementary bonded phases. Description ProntoSIL Chiral AX HPLC columns are weak anion exchangers and are very well suited for the separation of acidic chiral analytes such as N-derivatized amino acids, amino sulfonic acids, amino phosphonic acids, acidic pharmaceuticals, arylcarbonic acid herbicides and N-derivatized peptides. Two chiral selectors are offered: carbamylated quinine (ProntoSIL Chiral AX QN-1) and carbamylated quinidine (ProntoSIL Chiral AX QD-1). The structure of these phases is show in Figure 11. Choose a Mobile Phase That s Right for Your Sample ProntoSIL Chiral AX columns are multimodal in that they can be used in either reversed-phase, non-aqueous reversed phase or normal phase modes. Many chiral columns restrict the amount of organic or aqueous solvent allowed in the mobile phase. Because of the noncovalent bonding used in these other columns, use of solvents outside the recommended range can cause irreversible column damage. The chiral selective group used in Chiral AX is covalently bonded to the silica support and can be used in the same manner as a typical reversed phase column. These columns are well suited for use in high aqueous mobile phases making them the ideal choice for the separation of biological enantiomers such as amino acids and peptides. Figure 11 Structure of the Chiral AX Phases Figure 12 Separation of the Enantiomers of Allylglycine on Both Supports H N O O H 9 8 H N 1 S 3 R 4 S O S CH 3 silica ProntoSIL Chiral AX QN-1 ProntoSIL Chiral AX QD-1 N ProntoSIL Chiral AX QN-1: Carbamylated Quinine (8S, 9R) ProntoSIL Chiral AX QD-1: Carbamylated Quinidine (8R, 9S) Column: Mobile Phase: 4.0 x 150 mm 99% Methanol 1% Acetic Acid 1 ml/min Flow Rate: Temperature: 25 C Detection: UV 230 nm 11

11 Achieve Complementary Separations The chiral selectivity of ProntoSIL AX is due to several possible mechanisms including steric interaction, hydrogen bonding, π-π interactions and ion pairing. These different contributions offer a powerful separation mechanism. In most instances, R & S enantiomers separated on the quinine form (QN-1) of the column can be eluted in reverse order when using the quinidine (QD- 1) column (See Fig 12). The complementary separation thus obtained can be a powerful tool when scaling up the separation for purification of a given enantiomer. Figure 13 ProntoSIL Chiral AX Columns Show Extremely High Loadability Analytical High Loadability Chiral AX columns offer excellent loadability, up to 50 mg of sample per gram of stationary phase. This high capacity coupled with the complementary separations obtained makes ProntoSIL Chiral AX columns in the QN-1 and QD-1 phases an excellent preparative system for chiral compounds (Fig 13). 40 mg injected Column: ProntoSIL Chiral AX QN x 150 mm Mobile Phase: 10 mm ammonium acetate + 30 mm acetic acid in Methanol, ph = 6 Flow Rate: 1 ml/min Temperature: 25 C Literature References Quinine and Quinidine Derivatives as Chiral Selectors I. Brush Type Chiral Stationary Phases for HPLC Based on Cinchonan Carbamates and Their Application as Chiral Anion Exchangers, M.Lämmerhofer and W.Lindner, J.Chromatogr. A 741, (1996). Chiral Anion Exchange-Type Stationary Phases Based on Cinchonan Alkaloids. An effective tool for the separation of the enantiomers of chiral acids. M. Lämmerhofer, N.M.Maier and W. Lindner, American Laboratory 30/8, (1998). Enantioselective Anion Exchangers Based on Cinchona Alkaloid Derived Carbamates: Influence of C8/C9-Stereochemistry on Chiral Recognition, N.M.Maier, L. Nicoletti, M. Lämmerhofer and W. Lindner, Chirality 11, (1999). Enantiomeric Separation of N-protected Amino Acids by Non-aqueous Capillary Electrophoresis Using Tert.Butyl Carbamoylated Quinine as Chiral Additive, V. Piette, M. Lämmerhofer,W. Lindner, J. Crommen, Chirality 11, (1999). ProntoSIL Chiral AX Ordering Information Dimensions Particle (mm) Size (μm) AX QD-1 AX QN x F10EPS x F10FPS x F10EPS x F10FPS x F10EPS x F10FPS050 Guard Cartridges 2.0 x 10 (3 pk) F10FPS F10EPS x 10 (3 pk) F10FPS F10EPS05 Guard Cartridge Holder ProntoSIL Chiral AX columns are also available in preparative dimensions. Time (min) 12

12 High Performance ProntoSIL HPLC Columns Page ProntoSIL C18 ace-eps(shielded-encapsulation) ProntoSIL C18 AQB ProntoSIL C18 AQ PLUS ProntoSIL C18 H ProntoSIL C18 SH ProntoSIL Eurobond C18 ProntoSIL C8 SH ProntoSIL C4 ProntoSIL C1 ProntoSIL Phenyl ProntoSIL Amino E ProntoSIL Amino H ProntoSIL CN ProntoSIL OH ProntoSIL C ProntoSIL Chiral AX ProntoSIL ENVIRO-PHE ProntoSIL ENVIRO-PTL

13 ProntoSIL C18 ace-eps(shielded-encapsulation) new group of stationary RP-supports with polar embedded groups. very stable over a wide ph range (ph 1-10). maximum of hydrophobicity combined with a maximum of polar selectivity. The application area of these packings is in the pharmaceutical industry where the analytes often have basic or acidic groups. ProntoSIL C18 ace-eps 컬럼은넓은 ph 범위 (ph 1-10) 의매우안정된 packing 을가지고있다. 최대소수성결합으로최대극성선택성을가지고있으며, 친실리카반응성이매우낮다.( 실리카에캡슐화학처리 ) amitriptyline 과같은강한염기화합물도중성 ph 에서우수한대칭적인피크모양을제공한다. 따라서이컬럼의적용응용범위는염기또는산형태의분석이많은제약산업과천연물분리에적합하다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C18 ace-eps 250 x Å 3 µm 300 m2/g 18,5 ProntoSIL C18 ace-eps 250 x Å 1.03 µm 100 m2/g 8,5 ProntoSIL C18 ace-eps 250 x Å 5 µm 300 m2/g 18,5 ProntoSIL C18 ace-eps 250 x Å 5 µm 200 m2/g 12,5 ProntoSIL C18 ace-eps 250 x Å 5 µm 100 m2/g 8,5 ProntoSIL C18 ace-eps 250 x Å 10 µm 300 m2/g 18,5 ProntoSIL C18 AQ available in various pore and particle sizes fully end-capped for optimum separation of hydrophilic compounds good hydrophilic stability ProntoSIL C18 AQ the primary separation mechanism is hydrophobic interaction. ProntoSIL C18 AQ 컬럼은기존의역상컬럼으로친수성 sample 을분석을할때나타나는스팩트럼퍼짐현상을최소화하기위해특별히제조된역상컬럼이다. 물에용해되는강한극성샘풀들은물과함께빠져나가컬럼과상호작용이없어분리가이루어지지않는현상이발생된다. 그러나 ProntoSIL C18 AQ 을이용하면유기용매의첨가없이물을이동상으로하여친수성 sample 을분석할수있고, 또한다른 C18 컬럼과마찬가지로소수성 sample 을분리하는데사용된다. 물론이충진제는 full endcapping 처리가되어있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C18 AQ 250 x Å 3 µm 300 m2/g 14 ProntoSIL C18 AQ 250 x Å 3 µm 200 m2/g 9 ProntoSIL C18 AQ 250 x Å 5 µm 300 m2/g 14 ProntoSIL C18 AQ 250 x Å 5 µm 200 m2/g 9 ProntoSIL C18 AQ 250 x Å 10 µm 300 m2/g 14 14

14 ProntoSIL C18 AQ PLUS the use in aqueous mobile phases with an organic content below 10 %. ProntoSIL C18 AQ PLUS shows an enhanced stability at low ph s down to ph 1. packing shows excellent peak shapes in pure aqueous eluents but differs in shape selectivity compared to ProntoSIL C18 AQ. ProntoSIL C18 AQ 에추가로, ProntoSIL C18 AQ PLUS 는 10 % 의아래에유기용매와함께수용성이동상의사용을위하여개발되었다. ProntoSIL C18 AQ 와비교하여, ProntoSIL C18 AQ PLUS 는 ph 1 까지의낮은 ph 에서우수한안정을가지며, 초순수수용액이동상에서우수한피크모양을나타낸다. 이컬럼의응용은조합화학분야에적합하며, 표준분석조건은 0,1 % TFA 가포함된이동상에 0 ~ 100% 유기용매를빠른기울기용리를사용하여분석한다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C18 AQ PLUS 250 x Å 5 µm 300 m2/g 17 ProntoSIL C18 H available in various pore and particle sizes. fully end-capped. no non-specific adsorption ProntoSIL C18H 는 Bischoff 사에서제공하는표준역상컬럼이다. 역상크로마토그래피의모든영역에적용되며, 컬럼은 full endcapping 이되어있고, 매우순수한실리카를기초로한제품이다. 여러가지종류의 particle 과 pore size 를이용할수있어, Protein 과 Peptide 와같은거대생체분자의분리에우수한특성을가지고있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL 60-3-C18 H 250 x Å 3 µm 450 m2/g 18,5 ProntoSIL C18 H 250 x Å 3 µm 300 m2/g 17,5 ProntoSIL C18 H 250 x Å 3 µm 200 m2/g 11 ProntoSIL C18 H 250 x Å 3 µm 100 m2/g 7 ProntoSIL 60-5-C18 H 250 x Å 5 µm 450 m2/g 18,5 ProntoSIL C1 250 x Å 5 µm 300 m2/g 17,5 ProntoSIL C18 H 250 x Å 5 µm 200 m2/g 11 ProntoSIL C18 H 250 x Å 5 µm 100 m2/g 7 ProntoSIL C18 H 250 x Å 10 µm 300 m2/g 17,5 Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 15

15 ProntoSIL C18 SH stationary phase in the ProntoSIL line with the maximum carbon load. fully endcapped. excellent shape selectivity and stability even at ph 1. ProntoSIL C18 SH 는최대높은 carbon load 가지고있어서, ph 1 에서조차우수한피크선택성과안정성을보여준다. C18SH-bonding type 은 120 pore size 와 3, 5, 10um particle size 를제공한다. maximum carbon load 의특성으로 Capcell pak column 을대체하여사용하여도문제가없다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C18 SH 250 x Å 3 µm 300 m2/g 17 ProntoSIL C18 SH 250 x Å 5 µm 300 m2/g 17 ProntoSIL C18 SH 250 x Å 10 µm 300 m2/g 17 ProntoSIL Eurobond C18 Top Quality HPLC Column. Short Column for fast HPLC(125x) & Standard Column(250x). 가격대성능비가매우우수한제품 ProntoSIL Eurobond C18 Column 은새롭게출시된제품으로가격대성능비가우수하며, 단두가지종류의컬럼이제시되어있다. 제품은 full endcapping 되어있으며, spherical type 의충진제로제작되었다. Ordering Information Packing L X ID in mm Pore size Particle size L X ID in mm End capping ProntoSIL Eurobond C F181PS Å 5 µm 125 x 4.0 Fully ProntoSIL Eurobond C F181PS Å 5 µm 250 x 4.0 Fully ProntoSIL C8 SH Classical C8-type stationary phase. fully endcapped. 300 Å packings show excellent properties for the separate protein & peptide. Merck 사 Lichrospher B Column 과비교하여선택성우수. ProntoSIL C8 Column 은전형적인 C-8 컬럼으로 full endcapping 처리가되어있다. 이결합기술로 ph1 에서도매우우수한선택성과안정성으로보장한다. C8 SH Column 은여러종류의제품을이용할수있는데특히 300 Å 의경우프로테인과펩타이드와같은거대생물분자의분리에우수한특징을가진다. 또한 5um 의지지체의경우 60 의 pore size 를이용할수있어머크사의 Lichrospher B 컬럼과비교하여선택성이우수한것을보여준다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C8 SH 250 x Å 3 µm 300 m2/g 10 ProntoSIL C8 SH 250 x Å 3 µm 200 m2/g 7 ProntoSIL C8 SH 250 x Å 3 µm 100 m2/g 4 ProntoSIL 60-5-C8 SH 250 x Å 5 µm 450 m2/g 12 ProntoSIL C8 SH 250 x Å 5 µm 300 m2/g 10 ProntoSIL C8 SH 250 x Å 5 µm 200 m2/g 7 ProntoSIL C8 SH 250 x Å 5 µm 100 m2/g 4 ProntoSIL C8 SH 250 x Å 10 µm 300 m2/g 10 16

16 ProntoSIL C4 Classical C4-type stationary phase. fully endcapped. bonding technology it shows an enhanced stability even at ph 1. RP-mode & HIC-mode available. ProntoSIL C4 는전형적인 C-4 컬럼으로 full endcapping 처리가되어있다. 이결합기술로 ph1 에서도매우우수한선택성과안정성으로보장한다. C4 Column 은 RP-mode 뿐만아니라 HIC-mode 를이용하여프로테인과펩타이드와같은거대생물분자의분리에우수한특징을가진다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C4 250 x Å 3 µm 300 m2/g 5 ProntoSIL C4 250 x Å 3 µm 100 m2/g 5 ProntoSIL 60-5-C4 250 x Å 5 µm 450 m2/g 5 ProntoSIL C4 250 x Å 5 µm 300 m2/g 5 ProntoSIL C4 250 x Å 5 µm 200 m2/g 5 ProntoSIL C4 250 x Å 5 µm 100 m2/g 5 ProntoSIL C1 Classical C1-type stationary phase. The application area is mainly the separation of non-polar solutes bonding technology it shows an enhanced stability even at ph 1. HIC-mode available. ProntoSIL C1 는 C1 결합형정지상이다. C1 packing 은소수성샘풀의경우완벽하게잔존하지않는특성을가지며, 응용범위는비극성샘풀의분리에사용된다. 또한 HIC-mode 를이용하여 Proteins 의분리를위해사용될수있다. 결합기술로 C1- bonding 은 ph 1 까지안정적입니다. 충진물은 120 와 3 그리고 5um 의입자크기를이용할수있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C1 250 x Å 3 µm 300 m2/g 3 ProntoSIL C1 250 x Å 5 µm 300 m2/g 3 ProntoSIL Phenyl RP packing & fully endcapped. 120 Å and particle sizes of 3 µm and 5 µm bonding technology it shows an enhanced stability even at ph 1. This packing shows an enhanced selectivity and hydrophobicity ProntoSIL Phenyl 는 C18 또는 C8 와같은고정상과비교하여다른선택성을제공하는역상컬럼이다. 이컬럼은 full endcapped 처리가되어있다. 이결합기술에의해 ph 1 에서조차우수한안정성을가진다. 이충진제는분리성과소수성에우수한특성을가지며, aromatic 화합물을분석할때유용한컬럼이다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL Phenyl 250 x Å 3 µm 300 m2/g 10 ProntoSIL 60-5-Phenyl 250 x Å 5 µm 450 m2/g 12 ProntoSIL Phenyl 250 x Å 5 µm 300 m2/g 9,5 17

17 ProntoSIL Amino E Amino Propyl bonded phase fully endcapped it is perfectly suitable for the SFC of basic compounds three modes: NP-mode, RP-mode and IC-mode ProntoSIL Amino E 는 Amino Propyl 결합형정지상입니다. ProntoSIL Amino 와비교하여이컬럼의충진제는 full endcapped 처리가되어있다. ProntoSIL Amino 컬럼과마찬가지로 3 가지분석방법을사용할수있다 : NP 방법, RP 방법그리고 IC 방법. 그리고 SFC 분석에우수한특성을가지고있으며, full endcapped 이라는사실때문에염기성화합물등의 SFC 분석을위해완전하게적당하다. ProntoSIL Amino E 는오직 120 와 5 um 만이용할수있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL Amino E 250 x Å 5 µm 300 m2/g 5 ProntoSIL Amino H Amino Propyl bonded phase fully endcapped it is perfectly suitable for the SFC of basic compounds three modes: NP-mode, RP-mode and IC-mode ProntoSIL Amino H 는 Amino Propyl 결합형정지상입니다. ProntoSIL Amino 와비교하여이컬럼의충진제는높은소수성과다른선택성을보여준다. ProntoSIL Amino 컬럼과마찬가지로 3 가지분석방법을사용할수있다 : NP 방법, RP 방법그리고 IC 방법. 이컬럼은 SFC 분석에다른선택성을보여준다. 특별한결합기술에의해역상모드에서의탄수화물분석에강하여긴수명을가지고있다. ProntoSIL Amino H 는오직 120 와 5 um 만이용할수있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL Amino H 250 x Å 5 µm 300 m2/g 4,5 ProntoSIL CN cyano-propyl bonded phase used in normal phase mode and reversed phase mode quick equilibration time ProntoSIL CN 는 cyano-propyl 결합형정지상이다. 이컬럼은순상분석방법과역상분석방법에사용될수있다. 역상방법의 ProntoSIL CN 의적용분야는강한염기성샘풀의분리에이용된다. 순상방법의 ProntoSIL CN-support 는다른 NP-phases Silica, Amino 그리고 Diol 을보충한선택성을제공합니다. CN- 결합상의빠른평형상태시간때문에, 순상방법에서기울기용리를할수있는컬럼으로선택되어사용된다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL CN 250 x Å 3 µm 300 m2/g 5 ProntoSIL CN 250 x Å 5 µm 300 m2/g 5 18

18 ProntoSIL OH Diol bonded phase The Diol packing is an alternative to the silica-packings packings can also be used for SEC-applications ProntoSIL OH 는 Diol 결합형정지상입니다. Diol 충진제는 silica-packings 을대체할수있다. 이충진제의평형시간은실리카충진제와비교하여더짧으며, 그선택성은비교할수있다. 충진젱의보다낮은작용으로인하여크기배제크로마토그래피에사용될수있다. OH-bonding type 은 120 Å 과 3, 5 um 의입자크기를이용할수있다 Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL OH 250 x Å 3 µm 300 m2/g 4 ProntoSIL OH 250 x Å 5 µm 300 m2/g 4 ProntoSIL C30 stationary phase with a high carbon load excellent shape selectivity and stability even at ph 1 separation of isomers of carotonoides and other long alkyl chain solutes The 300 Å packing is also available with endcapping. ProntoSIL C30 는높은 carbon load 를가진고정상으로, 매우조밀하게 base matrial 에고정상이많이결합되어있어서 ph 1 에서도우수한피크선택성과안정성을가진다. C30-bonding 형은여러가지종류의컬럼을이용할수있으며, 특히넓은기공지지체는증진된피크선택성을보인다. C30 고정상의적용분야는 carotonoides 와고전적인 C18 컬럼들에의해분리되지않는다른긴알킬기사슬용질들의동질이성체의분리에사용된다. 특히 300 Å packing 은 endcapping 하여사용할수있다. Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL C x Å 3 µm 300 m2/g 25 ProntoSIL C x Å 3 µm 200 m2/g 20 ProntoSIL C x Å 5 µm 200 m2/g 20 ProntoSIL C x Å 10 µm 200 m2/g 20 ProntoSIL C x Å 3 µm 100 m2/g 13 ProntoSIL C x Å 5 µm 100 m2/g 13 ProntoSIL C30 EC 250 x Å 3 µm 100 m2/g 13 ProntoSIL C30 EC 250 x Å 5 µm 100 m2/g 13 Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 19

19 ProntoSIL Chiral AX weak anion exchanger two selectors Quinine and Quinidine suitable for the chiral separation of acidic analytes like amino acids, peptides and acidic pharmaceuticals used in the RP mode or the non aqueous reversed phase mode (NARP) ProntoSIL Chiral AX 컬럼은두선택자인 Quinine 와 Quinidine 와같이이용할수있는약음이온교환체이다. 칼럼들은아미노산, 펩티드그리고산성제약품과같은산성 analytes 의 chiral 분리를위해적합하다. 약간의아세트산이이동상에첨가되면역상분석방법또는비수용성역상방법 (NARP) 을사용할수있다. 이두선택방법은상호보완적이다. 만약 R enantiomer ( 이성질 ) 체가 Quinine 칼럼에 Senantiomer 전에 Quinidine 칼럼에추출되면용출순서는반대로나올것이다 Ordering Information Packing L X ID in mm Pore size Particle size Surface area %C ProntoSIL Chiral AX QN F10EPS Å 5 µm 300 m2/g - ProntoSIL Chiral AX QD F10FPS Å 5 µm 300 m2/g - ProntoSIL ENVIRO-PHE For the analysis of phenols according to EPA-604/625 페놀분석용컬럼 Ordering Information Packing P/N Pore size Particle size Form End capping ProntoSIL Enviro-PHE 125 x 4.6mm 1246F440PS Å 3 µm Spherical fully ProntoSIL Guard Cartridges (5 each) *Cartridge Holder Required,10x 6301F440PS Å 3 µm - - ProntoSIL ENVIRO-PTL For the analysis of aromatic hydrocarbons in petrochemical products 벤젠링을갖는석유화학제품분석용컬럼, Diesel 연료분석등에사용된다. Ordering Information Packing P/N Pore size Particle size Form End capping ProntoSIL Enviro-PTL 250 x 4.6mm 2546C450P Å 5 µm Spherical - ProntoSIL Guard Cartridges (5 each) *Cartridge Holder Required,10x 6302C450PS Å 5 µm

20 Application - 1 Page Cold medicine Phenol mixture EPA 604/625 Tricyclic Antidepressants I Fat soluble Vitamins II Engelhardt test for RP phases Antirheumatic bath ingredient High Speed Separation of Catecholamines Organic Acids I Organic Acids II Formic Acid / Acetic Acid Water soluble Vitamins Peptides I Proteins I Fat soluble Vitamins I Insulin Derivatives I Insulin Derivatives II Isomers of Tocopherol (Vitamin E) Tricyclic Antidepressants II Steroids - UV vs. Evaporative Light Scattering Detection (ELSD) Carotenoids I N-Methylated Xanthines Parabens Carbohydrates I Carbohydrates II Evaporative Light Scattering Detection Amino Acids I Weak Anions - Ion Pair Chromatography Iodate in Galvanic Bath Proteins II Peroxide Aminolevulinic Acid Alcohols I Dihydroxybenzoic Acids Bitter ingredients of hop I Bitter ingredients of hop II Melatonin Aldehydes and Ketones I: DNPH Derivatives in Galvanic Bath Fast Separation of Proteins Fast Separation of Peptides 21

21 Cold medicine ProntoSIL Eurobond C18 5 µm Phenol mixture EPA 604/625 ProntoSIL EnviroPHE Part number 1204F181PS050 Dimension 125 x 4.0 mm Eluent A: 5mM Li 2 SO 4 in H 2 O4; ph 2.1 B:ACN/50mM H 3 PO 4 Gradient 0%B, s; 0_12% B, s; 12-17% B, s; 17-39% B, s Sample Flow 1 ml/min Detection UV 230nm, s; UV 261nm, s Temperature 20 Injection 3 µl 1 : Ascorbic acid 2 : Paracetamol 3 : Coffein 4 : Chlorphenamin Part number 1246F440PS30 Dimension 125 x 4.6 mm Eluent A: H 2 O/1% HAc B: MeOH/1% HAc Gradient 5-100% B, 0-30min Flow 1 ml/min Detection UV 280 nm Temperature 25 Injection 2 µl Sample Supelco Calibration Standard (P/N: ) 1: Phenol 2: 4-Nitrophenol 3: 2.4-Dinitrophenol 4: 2-Chlorophenol 5: 2-Nitrophenol 6: 2.4-Dinmethylphenol 7: 4.6-Dinitro-o-Cresol 8: 2.4-Dichlorophenol 9: 4-Chloro-m-Cresol 10: Trichlorophenol 11: Pentachlorophenol Tricyclic Antidepressants I ProntoSIL CN Fat soluble Vitamins II ProntoSIL C18 SH Part number 2546F200PS050 Dimension 250 x 4.6 mm Eluent A: 25mM K 2 HPO 4 (ph 7.1) B: MeOH/ACN (15/65) 25% A, 75% B Flow 1 ml/min Detection UV 254nm Temperature 40 Injection 5 µl Concentration 50 ppm each Sample 1 : Trimipramine 2 : Doxepin 3 : Amitriptyline 4 : Imipramine 5 : Nortriptyline 6 : Desipramine 7 : Protriptyline Part number Dimension Eluent Flow Detection 2503F180PS x 3.0 mm MeOH 1 ml/min Evap. Light Scattering Detector (DDL 31) PMT: 600, T: 33 Temperature 20 Injection 5 µl Concentration ppm each Sample 1 : Vitamin A 2 : Vitamin A acetate 3 : Vitamin D 2 4 : Vitamin D 3 5 : Vitamin E 6 : Vitamin K 1 22

22 Engelhardt test for RP phases ProntoSIL Eurobond C18 5 µm Antirheumatic bath ingredient ProntoSIL Eurobond C18 5 µm Part number 1204F181PS050 Sample Dimension 125 x 4 mm Nr. Ret.(min) TP TP/m Asym. Name Uracil Eluent H 2 O/MeOH 51/49 (w/w) Aniline Flow 1 ml/min Phenol p-ethylaniline Detection UV 254nm N.N-Dimethylaniline Temperature Toluene Injection 5 µl Ethylbenzene Part number Dimension Eluent Flow Detection 2504F181PS x 4 mm H 2 O/MeOH 30/70 (w/w). 0.1% acetic acid 0.9 ml/min UV 254nm Temperature 20 Injection 20 µl Sample 1 : Camphor 2 : Nicotinic acid methyl easter 3 : Nicotinic acid benzyl easter 4 : Ethylenegly colmonosalicylate High Speed Separation of Catecholamines Organic Acids I ProntoSIL C18 AQ ProntoSIL C18 AQ Part number 0404F184PS030 Dimension 33 x 4 mm Eluent CAT-A-Phase Flow 1.0 ml/min Detection Coulometric Temperature 30 Injection 5 µl Sample 1 : Norepinephrine 2 : Epinephrine 3 : Dihydroxybenzylamine 4 : Dopamine Part number 2503F184PS030 Dimension 250 x 3.0 mm Eluent 50 mm H 3 PH 4 Flow 0.7 ml/min Detection UV 205nm Temperature 22 Injection 5 µl Sample 1 : Glutamic acid 2 : Oxalic acid 3 : Tartaric acid 4 : Malic acid 5 : Ascorbic acid 6 : Acetic acid 7 : Maleic acid 8 : Citric acid 9 : Fumaric acid ProntoSIL C18 AQ Part number 0203F184PS030 Dimension 25 x 3 mm Eluent ADAM-B-Phase Flow 0.95 ml/min Detection Coulometric Temperature 28 Injection 1 µl Sample 1 : Norepinephrine 2 : Epinephrine 3 : Dihydroxybenzylamine 4 : Dopamine 23

23 Organic Acids II ProntoSIL C18 AQ Formic Acid / Acetic Acid ProntoSIL C18 AQ Part number 2003F184PS030 Dimension 300 x 3.0 mm Eluent A: H 2 O/ 50 mm H 3 PO 4 B: ACN/ 50mM H 3 PO 4 Gradient 0-100% B, 0-20 min Flow 0.6 ml/min Detection UV 215 nm Temperature 25 Injection 5 µl Sample 1 : Oxalic acid 2 : Tartaric acid 3 : Pyridine-4-carboxylic acid 4 : Pyridine-3-carboxylic acid 5 : Lactic Acid 6 : Citric Acid 7 : Pyridine-2,6-dicarboxylic acid 8 : 4-hydroxybenzoic acid 9 : 3-Hydroxybenzoic acid 10 : Benzoic acid 11 : 2-Hydroxybenzoic acid (= Salicylic acid) Part number 2503F184PS030 Dimension 250 x 3.0 mm Eluent 100 mm H 3 PO 4 Flow 0.7 ml/min Detection UV 202 nm Temperature 22 Injection 5 µl Sample 1 : Formic acid 2 : Acetic acid Water soluble Vitamins ProntoSIL C18 AQ Peptides I ProntoSIL C18 H Part number 2003F184PS030 Sample Dimension 200 x 3.0 mm Eluent A: H 2 O/ 50 mm H 3 PO 4 B: ACN Gradient 0% B, s; 0-30% B, s; 30% B, s Flow 0.7 ml/min Detection UV 230 nm Temperature 22 Injection 5 µl 1 : Pyridoxamine 2 : Thiamine (Vit. B1)+impurity 3 : Ascorbic acid (Vit. C) 4 : Nicotinic acid (Niacin) 5 : Nicotinamide (Vit. B 3 ) 6 : Pyridoxal 7 : Pyridoxine (Vit. B 6 )+ impurity of Vit. B 12 8 : Folic acid 9 : Cyanocobalamin (Vit. B 12 ) 10 : Riboflavin (Vit. B 2 ) Part number 2546K185PS050 Dimension 250 x 4.6 mm Eluent Gradient Flow Detection A: H 2 O/ 0.1% TFA B: ACN/ H 2 O, 70/30 (v/v) 0.1%TFA % B, 0-30 min 1.5ml/min UV 220 nm Temperature 30 Injection 5 µl Sample 1 : Oxytocin 2 : Bradykinin 3 : Angiotensin II 4 : Eledoisin 5 : Neurotensin 6 : Angiotensin I 24

24 Proteins I ProntoSIL C18 H Fat soluble Vitamins I ProntoSIL C18 H Part number 2546K185PS050 Dimension 250 x 4.6 mm Eluent A: H 2 O/ 0.1% TFA B: ACN/ H 2 O, 95/5 (v/v) 0.1% TFA Gradient 25-80% B, 0-17min Flow 1.5 ml/min Detection UV 220 nm Injection 5 µl Sample 1 : Ribonuclease A 2 : Insulin, bovine 3 : Lysozyme 4 : BSA 5 : Myoglobin 6 : Ovalbumin Part number 2003F185PS030 Dimension 200 x 3.0 mm Eluent Acetonitrile Flow 1 ml/min Detection UV 280 nm Temperature 30 Injection 5 µl Sample 1 : Vitamin A 2 : Vitamin D2 3 : Vitamin D3 4 : α - Tocopherol Temperature 30 Insulin Derivatives I ProntoSIL C18 H Insulin Derivatives II ProntoSIL C18 H Part number 2546K185PS050 Dimension 250 x 4.6 mm Eluent A: H 2 O/ 0.1% TFA B: ACN/ H 2 O, 95/5 (v/v) 0.1% TFA Sample Gradient 25-80% B, 0-17min Flow 1.5 ml/min Detection UV 220 nm Temperature 30 Injection 5 µl 1 : Protamine Sulfate 2 : Phenol 3 : Cresol 4 : Insulin H 5 : Protamine insulin Part number 2546K185PS050 Dimension 250 x 4.6 mm Eluent A: H 2 O/ 0.1% TFA B: ACN/ H 2 O, 95/5 (v/v) 0.1% TFA Sample Gradient 25-80% B, 0-17min Flow 1.5 ml/min Detection UV 220 nm Temperature 30 Injection 5 µl 1 : Cresol 2 : Insulin H 3 : Insulin Chain A, oxidized 4 : Insulin, bovine 5 : Insulin Chain B, oxidized 25

25 Isomers of Tocopherol (Vitamin E) ProntoSIL C30 Tricyclic Antidepressants II ProntoSIL C18 AQ Part number 2546H300PS030 Dimension 250 x 4.6 mm Eluent MeOH/H 2 O, 96/4 (v/v) Flow 0.9 ml/min Detection Coulometric Temperature 25 Injection 5 µl Sample 1 : δ - Tocopherol 2 : γ - Tocopherol 3 : β - Tocopherol 4 : α - Tocopherol Part number 0604F184PS030 Dimension 53 x 4.0 mm Eluent ACN/MeOH/NH 4 H 2 PO 4 (10 mm), 62/13/23 (v/v), titration with TEA to ph 5 Sample Flow 0.69 ml/min Detection UV 254 nm Temperature 20 Injection 5 µl 1 : Doxepin 2 : Imipramine 3 : Nortriptyline 4 : Amitriptyline 5 : Trimipramine Steroids - UV vs. Evaporative Light Scattering Detection (ELSD) Carotenoids I ProntoSIL C30 ProntoSIL C18 H Part number 2003F185PS030 Dimension 200 x 3 mm Eluent MeOH Flow 0.65 ml/min Detection a) UV 200 nm b) ELSD: PMT gain: 600. T: 40 Temperature 30 Injection 5 µl Concentration 70 ppm each Sample 1 : Hydrocortisone 2 : Progesterone 3 : Cholecalciferol 4 : Ergocalciferol 5 : Ergosterol 6 : Cholesterol Part number 2546H300PS030 Dimension 250 x 4.6 mm Eluent MeOH/ TBME, 80/20 (v/v) Flow 1.4 ml/min Detection VIS 450 nm Temperature 20 Injection 5 µl Sample β- Carotene, technical mixture, isomerized 1 : all-trans 2 : 9-cis 26

26 N-Methylated Xanthines ProntoSIL C18 AQ Parabens ProntoSIL PHENYL Part number 1504F184PS050 Dimension 150 x 4.0 mm Eluent 25mM NaH 2 PO 4, ph 3/ MeOH 80/20 (v/v) Gradient 25-80% B, 0-17min Flow 1.0 ml/min Detection UV 254 nm Temperature 35 Injection 10 µl Sample 1 : Theobromine 2 : Theophylline 3 : Caffeine Part number 1204F050PS030 Dimension 125 x 4.0 mm Eluent 20mM K2HPO4 / ACN, 50/50 (v/v) Flow 1.0 ml/min Detection UV 254 nm Temperature 40 Injection 10 µl Sample Parabens 1 : Methylparaben 2 : Ethylparaben 3 : Propylparaben 4 : Butylparaben Carbohydrates I ProntoSIL NH2 Carbohydrates II Evaporative Light Scattering Detection ProntoSIL NH2 Part number 1246F190PS030 Dimension 125 x 4.0 mm Eluent H2O/ACN, 20/80 (v/v) Flow 1.0 ml/min Detection RI Temperature Ambient Injection 6 µl Sample 1 : Fructose 2 : Mannose 3 : Glucose 4 : Galactose 5 : Saccharose 6 : Maltose Part number Dimension Eluent Flow Detection Temperature 1246F190PS x 4.0 mm H2O/ACN, 20/80 (v/v) 1.0 ml/min RI Ambient Sample 1 : Fructose 2 : Mannose 3 : Glucose 4 : Galactose 5 : Saccharose 6 : Maltose Injection 6 µl 27

27 Amino Acids I ProntoSIL C18 H Weak Anions - Ion Pair Chromatography ProntoSIL C8 SH Part number 2003F185PS030 Dimension 200 x 3.0 mm Eluent A: 20 mm CH 3 COONa in H 2 O/ACN, 93/3 (v/v) B: 20 mm CH 3 COONa in H 2 O/ACN, 50/50 (v/v) Gradient 5-28% B, s; 28-45% B, s 45-82% B, s 82-90% B, s Flow Detection Temperature 30 Injection 1 µl Sample 0.6 ml/min UV 340 nm SIGMA standard AA-s- 18: OPA/ Mercaptopropionic acid labeled Part number 2003F080PS030 Dimension 200 x 3.0 mm Eluent 10mM KH 2 PO 4 /10 mm TBA-H 3 PO 4, ph 2.4 Flow 0.6 ml/min Detection UV 205 nm Temperature 25 Injection 5 µl Sample 1 : acetic acid 2 : lactic acid 3 : malic acid 4 : iodate 5 : citric acid Iodate in Galvanic Bath ProntoSIL C18 SH Proteins II ProntoSIL C4 Part number 2546F180PS050 Injection 20 µl Part number 2003K040PS030 Detection UV 220 nm Dimension 200 x 4.6 mm Eluent 10mM KH 2 PO 4 / 2 mm TBA-H 3 PO 4, ph 1.95 Flow 1 ml/min Detection UV 196 nm Temperature 25 Sample Galvanic bath, technical 1 : iodate Dimension Eluent 200 x 3.0 mm A: H 2 O/0.1% TFA B: ACN/H2O, 95/5 (v/v) 0.1% TFA Gradient 10-40% B, s; 40-47% B, s; % B, s Flow 0.6 ml/min Temperature 30 Injection 5 µl Sample 1 : Cytochrome c 2 : Fibrinogen, human 3 : Chymotrypsinogen 4 : β-lactoglobulin 5 : Thyroglobulin 28

28 Peroxide ProntoSIL C18 H 5-Aminolevulinic Acid ProntoSIL C18 H Part number 0603F185PS030 Dimension 53 x 3.0 mm Eluent Flow A: 35mM citric acid/ 85mM sodium acetate/ 0.5mM heptane sulphonate: ph 4.3 B: MeCH A/B: 99.7/0.3 (w/w) 0.5 ml/min Detection Coulometric Temperature 25 Injection 5 µl Concentration 500 ppb Sample 1 : Perbenzoic acid t-butyl ester Part number 1204F185PS030 Dimension 125 x 4.6 mm Eluent H 2 O/MeOH/THF, 90/6/4 (v/v) 0.5 mm octane sulphonic acid (sodium salt): ph 3.26 Flow 1 ml/min Detection Conductivity; FS: 5 µs Temperature 26 Injection 10 µl Concentration 100 ppb Sample 1 : 5-Aminolevulinic acid Alcohols I ProntoSIL C18 AQ Dihydroxybenzoic Acids ProntoSIL CN Part number 1546F184PS050 Dimension 150 x 4.6 mm Eluent H 2 O/MeOH, 96/4 (v/v) 0.8 mm Caps ; ph 2.5 Flow 1.1 ml/min Detection Indirect Conductivity ; FS: 500 µs Temperature 26 Injection 10 µl Concentration 10 ppb each Sample 1 : Ethanol 2 : Isopropanol 3 : n-propanol Part number 2003F200PS030 Dimension 200 x 3 mm Eluent 30mM Sodium acetate/ 30mM Sodium Citrate; ph ml/min Flow Detection 0.5 ml/min UV 220 nm Temperature 20 Injection 5 µl Concentration Sample 1.8 mmol each 1 : 2.3-Dihydroxybenzoic Acid 2 : 2.5-Dihydroxybenzoic Acid 3 : Salicylic Acid (1.2-DHBA) 29

29 Bitter ingredients of hop I ProntoSIL C18 SH Bitter ingredients of hop II ProntoSIL C18 SH Part number 0604F180PS050 Dimension 53 x 4 mm Eluent H2O/MeOH 25/75 (v/v) + 50 mm H 3 PO 4 Flow 1 ml/min Detection UV 314 nm Temperature 21 Injection 10 µl Sample Hop CO 2 -extract 1 : not identified 2 : Cohumulon 3 : Deoxyhumulon 4 : n-plus Adhumulon 5 : Colupulon 6 : n-plus Colupulon Part number 2504F080PS050 Dimension 250 x 4 mm Eluent H2O/MeOH 20/80 (v/v) + 50 mm H 3 PO 4 Flow 1 ml/min Detection UV 314 nm Temperature 21 Injection 10 µl Sample Hop CO 2 -extract 1 : not identified 2 : Cohumulon 3 : Deoxyhumulon 4 : n-plus Adhumulon 5 : Colupulon 6 : n-plus Colupulon Melatonin ProntoSIL C18 H Aldehydes and Ketones I: DNPH Derivatives in Galvanic BathPronto SIL C18 H Part number 1003F185PS030 Dimension 100 x 3 mm Eluent ESA CAT-A Phase Flow 0.5 ml/min Detection Coulometric Temperature 25 Injection 10 µl concentration 10 ppb Sample 1 : Melatronin Part number 2546F185PS050 Dimension 250 x 4.6 mm Eluent A : H2O; B: ACN Gradient 40% B, 0-60 s; 40-60% B, s; 60-80% B, s Flow 1 ml/min Detection UV 360 nm Temperature 30 Injection 50 µl concentration 10 ppb Sample 1 : DNPH 2 : Formaldehyde 3 : Acetaldehyde 4 : Acetone 5 : Propanal 6 : Pentanal 30

30 Fast Separation of Proteins ProntoSIL C18 H Fast Separation of Peptides ProntoSIL C18 H Part number 0746K18PS030 Detection Dimension 75 x 4.6 mm Eluent A: H 2 O/0.1% TFA B: ACN/ H 2 O 95/5 (v/v)/0.1% FTA Sample Gradient a) 29-48% B, 0-25s; %B, s b) 29-48% B, 0-49 s; % B, s c) % B, s Flow a) 4ml/min; b) 2ml/min; c) 1ml/min Temperature 30 Injection 5 µl UV 220 nm 1: Ribouclease A 2: Insulin, bovine 3: Lysozyme 4: BSA 5: Myoglobin 6: Ovalbumin 7: not identified Part number 0746K185PS030 Dimension 75 x 4.6 mm Eluent A: H 2 O/0.1% TFA B: ACN/ H 2 O 70/30 (v/v), 0.1% FTA Gradient 35-80% B, s Flow 1 ml/min Detection UV 220 nm Temperature 30 Injection 5 µl Sample 1: Oxytocin 2: Bradykinin 3: Angiotensin I 4: Eledoisin 5: Neurotensin 6: Angiotension II Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 31

31 ProntoSIL HPLC Column Application - 2 Page Ketones l Organic Acids lll Coconat Fatty Acid - Ethoxylates 10 EO Castor oil Ethoxylates 20 EO Soybean oil - Ethoxylates 20 EO Calcium-DL-2-Hydroxy-4-methylthiobutyrate in Animal Food Ubiqinols and Ubiquinones Aldehydes and Ketones as DNPH Derivatives Tryptic digest of Casein Peptone Aflatoxines with KBr Derivatization Peptone Amino Acids with FMOC Chinin and Saccharin in Beverages Flavonoids in Red Wine Analysis of Nitro-PAH with Fluorescence Detection (I) Analysis of Nitro-PAH with Fluorescence Detection (II) 32

32 Ketones I ProntoSIL C18 AQ Organic Acids III ProntoSIL C18 AQ Part number 0203F184PS030 Dimension 25 x 3 mm Eluent A: H 2 O B: ACN Gradient % B, 0-18 min Flow 0.35 ml/min Detection UV 270 nm Temperature 30 Injection 2 µl Sample 1: Tetramethylketone 2: 2-Pentanone 3: 2-Hexanone 4: 2-Hexanone 5: 2-Octanone 6 2-Nonanone 7: 2-Decanone 8: 2-Undecanone 9: 2-Dodecanone 10: 2-Tridecanone 11: 2-Hexadecanone Part number 3003F184PS030 Dimension 300 x 3 mm Eluent 5 mm Li2So4/ H2SO4 ph 2.81 Flow 0.56 ml/min Detection RI Temperature 20 Injection 10 µl Concentration 300 ppm each, except 1,3 Sample 1: oxalic acid 150 ppm 2: not identified 3: tartaric acid 150 ppm 4: quinic acid 5: malic acid 6: malonic acid 7: shikimic acid 8: lactic acid 9: ascorbic acid 10: acetic acid 11: citric acid 12: fumaric acid 13: succinic acid Coconat Fatty Acid Ethoxylates 10 EO ProtoSIL NH 2 Castor oil Ethoxylates 20 EO ProtoSIL NH 2 Part number 2546F190PS050 Dimension 250 x 4.6 mm Eluent A: n-hexane B: acetone Gradient 3-20% B, s; 20-38% B, s; 38-70% B, s 70% B, s Flow Detection Temperature 30 Injection 50 µl 1 ml/min Evap. Light Scattering Detector (ELSD), model DDl 31; PMT: 300, T: 42, p(air): 1bar Part number 2546F190PS050 Dimension 250 x 4.6 mm Eluent A: n-hexane B: acetone Gradient 0-5% B, s; 5-40% B, s 40% B, s Flow 1 ml/min Detection Evap. Light Scattering Detector (ELSD), model DDl 31; PMT: 500, T: 42, p(air): 1bar Temperature 30 Injection 50 µl 33

33 Soybean oil Ethoxylates 20 EO ProtoSIL NH 2 Calcium-DL-2-Hydroxy-4- methylthiobutyrate in Animal Food ProtoSIL NH 2 Part number 2546F190PS050 Flow 1 ml/min Part number 1003F185PS030 Flow 0.55 ml/min Dimension Eluent 250 x 4.6 mm A: n-hexane B: acetone Gradient 3-20% B, s; 20-38% B, s; 38-70% B, s 70% B, s Detection Evap. Light Scattering Detector (ELSD), model DDl 31; PMT: 300, T: 42, p(air): 1bar Temperature 30 Injection 50 µl Dimension Eluent 100 x 3 mm A: 75 mm NaH2PO4/ 0.2 mm heptanesulfonic acid (sodium salt), ph 2.9 B: ACN; A/B 98/2 (v/v) Detection Temperature 25 Injection 10 µl Coulometric Aldehydes and Ketones as DNPH Derivatives ProntoSIL C18 H Tryptic digest of Casein Peptone ProntoSIL C18 AQ Part 2504F185PS050 Sample number Dimension 250 x 4.0 mm Eluent/Gradient (final compositions of linear steps are given (v/v/v ratios)): 0-5 min isocratic: THE/ACN/H 2 O (16/25/59) 10 min. The/ACN/H 2 O (10/40/50) 20 min. The/ACN/H 2 O (0/60/40) 30 min. The/ACN/H 2 O (0/80/20) 40 min. The/ACN/H 2 O (0/100/0) 45 min. The/ACN/H 2 O (16/25/59) Flow 1.3 ml/min Detection UV 360 nm Temperature 30 Injection 10 µl 1: Nonanal (internal standard) 2: 2,4-Dinitrophenylhydrazine 3: Formaldehyde 4: Acetalderhyde 5: Acetone 6: Acrolein 7: Propanal 8: Crotonic Aldehyde 9: n-butanal 10: Benzaldehyde 11: Pentanal 12: 2-Methylbenzaldehyde 13: 4-Methylbenzaldehyde 14: 3,3-Dimethylbutanone 15: Hexanal 16: 2,4-Dimethylbenzaldehyde 17: 2,4-dimethylpentanone 18: Heptanal 19: Octanal Part number 0746K180PS030 Dimension 75 x 4.6 mm Eluent A: H 2 O/0.1% TFA B: ACN/ H 2 O 70/30 (v/v), 0.1% TFA Gradient 0-40% B, s 40-0% B, s Flow 1 ml/min Detection UV 220 nm Temperature 30 Injection 5 µl Sample Tryptic digest of casein peptone 34

34 Aflatoxines with KBr Derivatization ProntoSIL C18 AQ Amino Acids with FMOC ProntoSIL-AA-FMOC 5.0µm Part number 2546F184PS050 Dimension 250 x 4.6 mm Eluent ACN/MeOH/H2O 20/20/60 (v/v/v) Flow 1.0 ml/min Detection Fluorescence Detector Model 8470 Ex: 365nm Em:429nm Temperature 30 Injection 5 µl Sample Aflatoxin-Standard G2: 60 fg/ml G1: 100 fg/ml B2: 50 fg/ml B1: 90 fg/ml Injection: 100 µl Part number 2504F470PS050 Dimension 250 x 4.0 mm Eluent A: 50 mm CH 3 COONa ph 4.2, 5% THF B: ACN Flow 1.0 ml/min Gradient 20-36% B, 0-20 min 36-38% B, min 38% B, min 38-59% B, min 59-67% B, min Detection Fluorescence Ex: 263 nm Em: 313 nm Temperature 30 Injection 10 µl Sample SIGMA standard AA-S Asn, Gln, IS (ß-tAla) FMOC labeled Chinin and Saccharin in Beverages ProntoSIL C18 H 5.0 µm Flavonoids in Red Wine ProntoSIL C8 ace-eps 5.0µm Part number 1204F185PS050 Dimension 125 x 4.0 mm Eluent MeOH/H 2 O 70/30 (v/v) + 5ml/l H3PO4 Flow 1.0 ml/min Detection UV 210 nm Temperature 25 Injection 20 µl Sample Bitter Lemon Light 1: Quinine 2: Saccharin Part number 1204F08APS050 Dimension 125 x 4.0 mm Eluent A: 10 mm NaH 2 PO 4 ph 3.0 B: ACN Flow 2.5 ml/min Gradient Gradient: 30% B, 0-2 min 30-70% B, 2-4 min 70% B, min 70-30% B, min 30% B, min Detection UV 280 nm (Stilbenes) 370 nm (Flavonoides) Temperature 40 Injection 25 µl Sample Red Wine 1: Myrcetin 2: cis- Resveratrol 3: trans- Resveratrol 4: Quercetin 5: Caempferol 35

35 Analysis of Nitro-PAH with Fluorescence Detection (I) ProntoSIL Phenyl Analysis of Nitro-PAH with Fluorescence Detection (II) ProntoSIL Phenyl Part number 1204F050PS030 Dimension 125 x 4.0 mm Eluent A: MeOH/H 2 O 60/40 (v/v) B: MeOH 0 % B hold for 13 min, % B in 29 min Flow 0.8 ml/min Detection Fluorescence Detector Model 8470 wavelength program Temperature 25 Injection 20 µl Sample Nitro-PAH Mix1 Part number 1204F050PS030 Dimension 125 x 4.0 mm Eluent A: MeOH/H 2 O 60/40 (v/v) B: MeOH 0 % B hold for 13 min, % B in 29 min Flow 0.8 ml/min Detection Fluorescence Detector Model 8470 wavelength program Temperature 25 Injection 20 µl Sample Nitro-PAH Mix2 Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 36

36 ProntoSIL HPLC Column Application - 3 Page Carbohydrates, Organic Acids and Alcohols in Wine Dimethylsiloxane with Evaporative Light Scattering Detection Fast Analysis of a pharmaceutical Teststandard with Multiwavelength Detection Fast Analysis of a Cold Medicine II with Multiwavelength Detection Standardtestmixture with Multiwavelength Detection Fast Analysis of Parabens II with Multiwavelength Detection Fat soluble Vitamins II with Multiwavelength Detection Aromatic Hydrocarbons according to pren Diesel Acetaldehyde in Mineralwater Ergosterol in Grass Sulfa Drugs 37

37 Carbohydrates, Organic Acids and Alcohols in Wine Carbohydrate H+ Dimethylsiloxane with Evaporative Light Scattering Detection ProntoSIL C18 SH Part number Dimension 300 x 7.8 mm Eluent 1.25 mm H 2 SO 4 Flow 0.6 ml/min Detection RI Temperature 45 Injection 50 µl Sample Wine Complett Standard Part number 2546F180PS050 Detection Dimension 250 x 4.6 mm Eluent A: ACN/Acetone 70/30 (v/v) B: Ethyl acetate 5-70% B in 50 min, 70% B hold Temperature 25 for 15 min Sample Flow 0.9 ml/min Evap. Light Scattering detector (DDL31) PMT: 500, Temp: 40 Pressure (air): 1.5 bar Silicone-Standard (DMS-T11) Injection: 10 µl Fast Analysis of a pharmaceutical Teststandard with Multiwavelength Detection ProntoSIL C18 AQ Fast Analysis of a Cold Medicine II with Multiwavelength Detection ProntoSIL C18 AQ Part number Dimension Eluent Gradient Flow Detection 0446F184PS x 4.6 mm A: H 2 O + 0.1% TFA; B:ACN Sample 20-30% B in 60 sec 1.2 ml/min Multiwavelength Detector (DAD-3L) Temperature 25 Injection 1 µl 1 Ascorbinic acid 2 Paracetamol 3 Caffeine 4 Acetylsalicylic acid Part number Dimension Eluent Gradient Flow Detection 0446F184PS x 4.6 mm A: H 2 O + 0.1% TFA; B:ACN Sample 20-30% B in 30 sec 1.2 ml/min Multiwavelength Detector (DAD-3L) Temperature 25 Injection 1 µl 1 Paracetamol 3 Caffeine 4 Propylphenanzone Wavelength 230, 261 and 274 nm; Ref. at 350nm Wavelength 230, 254 and 274 nm; Ref. at 350nm 38

38 Standardtestmixture with Multiwavelength Detection ProntoSIL C18 SH Fast Analysis of Parabens II with Multiwavelength Detection ProntoSIL C18 AQ Part number 0604F180PS030 Dimension 53 x 4.0 mm Eluent H2O/ ACN; 40/60 Flow 1.0 ml/min Detection Multiwavelength Detector (DAD-3L) Wavelengthe 254, 262 and 273 nm Ref. at 350nm Temperature 25 Injection 1 µl Sample 1 Acetone 2 Benzene 3 Toluene 4 m-xylene Part number 0446F184PS050 Dimension 33 x 4.6 mm Eluent A: H2O B: ACN Gradient 20-30% B in 30 sec Flow 1.0 ml/min Detection Multiwavelength Detector (DAD-3L) Wavelengthe 210, 230 and 254 nm Ref. at 350 nm Temperature 25 Injection 2 µl Sample 1 Uracil 2 Methylparabene 3 Ethylparabene 4 Propylparabene Fat soluble Vitamins II with Multiwavelength Detection ProntoSIL C18 SH Aromatic Hydrocarbons according to pren ProntoSIL ENVIRO PTL Part number 2503F180PS030 Dimension 250 x 3.0 mm Eluent MeOH Flow 1 ml/min Detection Multiwavelength Detector (DAD-3L) Wavelengthe 225, 264, 325 nm Temperature 25 Injection 5 µl Sample 1: Vitamin A 2: Vitamin A acetate 3: Vitamin D 2 4: Vitamin D 3 5: Vitamin E 6: Vitamin K 1 Part number 2546C450PS050 Dimension 250 x 4.6 mm Eluent Heptane Flow 1.0 ml/min Backflush on 16 min Detection RI Temperature 25 Injection 10 µl Sample Calibration Standard B - EUOPEAN STANDARD pren (June 1997) 1: Cyclohexane (2.0g/100ml) 2: o-xylene (1.0g/100ml) 3: 1-Methylnaphthalene (1.0g/100ml) 4: Phenanthrene (0.2g/100ml) between Cyclohexane and o- Xylene (the resolution between Cyclohexane and o-xylene should not be less thean 5.0) 39

39 Diesel ProntoSIL ENVIRO PTL Acetaldehyde in Mineralwater ProntoSIL C18 ACE- EPS Part number Dimension Eluent Flow backflush on 2546C450PS x 4.6 mm Heptane 1.0 ml/min 20 min Sample 1: Cyclohexane 2: Monocycl. Aromatics 3: Dicycl. Aromatics 4: Dicycl. Aromatics 5: Polycycl. Aromatics Part number Dimension Eluent Flow Detection 1504F18APS x 4.0 mm H2O/ ACN 50/50 (v/v) 1.0 ml/min UV 360 nm Sample Mineralwater after Derivatisation with DNPH 1 DNPH 5 Acetaldehyde. 6ppb Detection RI Temperature 25 Injection 10 µl Temperature 25 Injection 500 µl Ergosterol in Grass ProntoSIL C18 H Sulfa Drugs ProntoSIL C18 ACE - EPS Part number 1204F185PS050 Dimension 125 x 4.0 mm Eluent H2O/MeOH 2/98 (v/v) Flow 0.75 ml/min Detection UV 282 nm Temperature 25 Injection 20 µl Sample 1 Ergosterol Extracted according to VDLUFA (1993) Part number 1546F18APS050 Dimension 150 x 4.6 mm Eluent MeOH/H2O/Acetic Acid 20/79/1 (v/v/v) Flow 1 ml/min Detection UV 254 nm Temperature 25 Injection 3 µl Sample 1 Sulfanilamide 2 Sulfadiazine 3 Sulfathiazole 4 Sulfamerazine 5 Sulfamethazine 40

40 ProntoSIL HPLC Column Application - 4 Page Sugaralcohols, Mono-and Disaccharides with BioQuant Carbohydrate Inositol Alcohol, Sugaralcohols, Mono-and Disaccharides with BioQuant Carbohydrate Sugaralchols, Mono-and Disaccharides with BioQuant Carbohydrate Alcohol, Sugaralcohols, Mono-and Disaccharides with BioQuant Carbohydrate Column Sugar1 Dimension 250 x 4.6 mm PEEK Eluent 100mM NaOH Flow 0.9 ml/min Detection BioQuant Carbohydrate Temperature 28 Injection 20 µl Sample 1 Inositol 2 Arabitol 3 Sorbitol 4 Fucose 5 Arabinose 6 Glucose 7 Xylose 8 Fructose 9 Lactose 10 Sucrose (1-50 mg/l) Column Dimension Eluent Gradient Flow Detection Temperature 28 Injection 20 µl Sugar1 Sample 250 x 4.6 mm PEEK A: 96mM NaOH B: 96mM NaOH, 250 mm NaOAc 5%-10%B 0-15min; 10-25%B min 1 ml/min BioQuant Carbohydrate 1 Ethanol 2 Inositol 3 Arabitol 4 Sorbitol 5 Fucose 6 Arabinose 7 Glucose 8 Xylose 9 Fructose 10 Lactose 11 Sucrose 12 Maltose ( mg/l) 41

41 ProntoSIL HPLC Column Application - 5 High Speed Separation of Catecholamines High Speed Separation of Catecholamines ProntoSIL C18 AQ High Speed Separation of Catecholamines ProntoSIL C18 AQ Part number Dimension Eluent Flow 0404F184PS x 4 mm CAT-A-Phase 1.0 ml/min Sample 1: Norepinephrine 2: Epinephrine 3: Dihydroxybenzylamine 4: Dopamine Part number Dimension Eluent Flow 0203F184PS x 3 mm ADAM-B-Phase 0.95 ml/min Sample 1: Norepinephrine 2: Epinephrine 3: Dihydroxybenzylamine 4: Dopamine Detection Coulometric Detection Coulometric Temperature 30 Injection 3 µl Temperature 28 Injection 1 µl 42

42 ProntoSIL HPLC Column Application - 6 Page Sugaralcohols, Mono-and Disaccharides with BioQuant Carbohydrate.. 44 Sugars in Applejuice with BioQuant Carbohydrate Sugars in Applejuice Sugars in Orangejuice (A) and Diet Orangejuice (B) Sugars in Shampoo Maltooligosaccacharides from Cornsyrup Monosaccharides of Glycoproteins Plasma Catecholamines Catecholamine Standard Catecholamine Standard Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 43

43 Sugaralcohols, Mono-and Disaccharides with BioQuant Carbohydrate Sugars in Applejuice with BioQuant Carbohydrate Column PAD Column Dimension 250 x 4.6 mm PEEK Eluent 100mM NaOH Flow 0.9 ml/min Detection BioQuant Carbohydrate Temperature 28 Injection 20 µl Sample 1 Inositol 2 Arabitol 3 Sorbitol 4 Fucose 5 Arabinose 6 Glucose 7 Xylose 8 Fructose 9 Lactose 10 Sucrose (1-50mg/l) Column PAD Column Dimension 250 x 4.6 mm PEEK Eluent 100 mm NaOH Flow 0.9 ml/min Detection BioQuant carbohydrate Temperature 28 Injection 20 µl (diluted 1: 1000) Sample 1 Sorbitol 2 Glucose 3 Fructose 4 Sucrose Sugars in Applejuice Sugars in Oragnejuice (A) and Diet Orangejuice (B) Column Dimension Eluent Flow hamilton RCX x 4.6 mm PEEK 60 mm NaOH 2.00 ml/min Sample 1 Sorbitol 2 Glucose 3 Fructose 4 Sucrose Column Dimension Eluent Flow Hamilton RCX x 4.6 mm PEEK 60 mm NaOH 2.00 ml/min Injection 5 µl (diluted 1: 1000) Sample 1 Glucose 2 Fructose 3 Sucrose Detection BioQuant Carbohydrate Detection BioQuant carbohydrate Temperature 32 Injection 1 µl (diluted 1:1000) Temperature 32 44

44 Sugars In Shampoo Maltooligosaccacharides from Cornsyrup Column Hamilton RCX-30 Injection 1 µl Column Hamilton RCX Flow 2.00 ml/min Dimension 150 x 4.6 mm PEEK Eluent 60 mm NaOH Flow 2.00 ml/min Detection BioQuant Carbohydrate Temperature 32 Sample 3 Sorbitol 5 Glucose 6 Fructose 7 Sucrose Dimension Eluent Gradient 150 x 4.6 mm PEEK Eluent A: 60 mm NaOH Eluent B: 60 mm NaOH: 500 mm Na-acetat 10-60% B in 0-20 min Detection BioQuant carbohydrate Temperature 32 Injection 5 µl Sample G4- G10 Monosaccharides of Glycoproteins Plasma Catacholamines Column Dionex CarboPAC PA1 Injection 5 µl Column ProntoSIL C18 AQ Injection 5 µl Dimension 250 x 4.0 mm PEEK Eluent 20 mm NaOH Flow 1.00 ml/min Detection BioQuant Carbohydrate Temperature 28 Sample 1 Galactosamine 2 Glucosamine Dimension 33 x 3.0 mm Eluent Pronto- Cat Phase Flow 0.5 ml/min Detection BioQuant carbohydrate Temperature 30 Sample 1 Noradrenalin 2 Adrenalin 3 DHBA 4 Dopamin 45

45 Catecholamine -6 -Standard Catecholamine -8 -Standard Column ProntoSIL C18 AQ Dimension 33 x 3.0 mm Eluent Pronto- Cat Phase Flow 0.5 ml/min Detection BioQuant Carbohydrate Temperature 30 Injection 5 µl Sample 1 Arenalin 2 DHBA 3 DOPAC 4 5-HIAA 5 HVA 6 Serotonin Column ProntoSIL C18 AQ Injection 5 µl Dimension 33 x 3.0 mm Sample 1 Noradrenalin Eluent Pronto- Cat Phase 2 Adrenalin Flow 0.5 ml/min 3 DHBA 4 DOPAC Detection BioQuant CAT Amine, +500 mv 5 Dopamin Temperature HIAA 7 HVA 8 Serotonin Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 46

46 HPLC Columns 고정상의종류 Reverse Phase Material 1. C1 (=TMS) : Si-CH3 역상 (reverse phase=rp) 의성질을지녔으며, alkyl group 을가진 bonded phase 중에서 least retensive 합니다. 극성인물질이나 functional group 을많이가진물질의분석에적합합니다. 2. C4 (butyl) : Si-C4H9 역상의성질을지녔으며, HIC 나 ion-pairing chromatography 에유용합니다. C8 이나 C18 의고정상보다는비극성물질에대해 less retensive 하며, 300A 의 pore size 를가진 silica 에서단백질이나 hydrophobic peptide 를분석할때유용합니다. 3. C8 (octyl) : Si-C8H17 역상의성질을지녔으며, C18 과비슷한선택성을지니고있습니다. 그러나 C18 보다는 less retensive 하다. 넓은응용분야를가지고있으며, 300A 의 pore size 를가진 silica 에서 peptide mapping, small hydrophilic 단백질을분석할때유용합니다. 4. C18(octadecyl=ODS) : Si-C18H37 전통적인역상의고정상으로흔히사용되어왔으며, 거의모든유기화합물에대해응용범위를가집니다. 또한 ion-pairing chromatography 에유용하며, 300A 의 pore size 를가진 silica 에서 hydrophilic peptide 를분석할때이상적입니다. 5. Phenyl : Si-CH2CH2CH2C6H5 역상의고정상으로독특한선택성을가지고있습니다. 특히 aromatic 화합물을분석할때유용합니다. Normal Phase Material 1. CN (cyano) : Si-CH2CH2CH2CN 역상혹은순상 (normal phase=np) 으로응용가능하며, 약간극성을띱니다. 극성물질에대해고유한선택성을가지며, 재평형이빠르고, gradient 분리에적합합니다. 약리물질의분리에응용이많은것으로알려져있습니다. 2. NH2 (amino) : Si-CH2CH2CH2NH2 역상혹은순상으로응용가능하며, 약한음이온교환수지역할도할수있습니다. 역상으로사용될경우 carbohydrate 분석에특히유용하며, buffer 와함께사용될경우음이온이나유기산분석에사용될수있습니다. 3. SAX : Si-CH2CH2CH2N+(CH3)3 음이온교환수지역할을하며, 유기산이나 nucleotide, nucleoside 분석에유용합니다. 4. SCX : Si-CH2CH2CH2SO3H 양이온교환수지역할을하며, 유기염기물을분석할경우사용됩니다. 5. Silica : Si-OH 전통적인순상으로사용되며, 비이온이면서극성인유기화합물의분리에적합합니다. Column 의물리적성질 1. Column Dimensions and length 5. Pore Size 컬럼의 packing 되는내경과길이를말합니다. Short column mm 길이의컬럼을말하며짧은 run times 과낮은 Back pressure 를제공합니다. Long column mm 길이의컬럼을말하며높은 resolution 과오랜 run time 을같습니다. Narrow-bore column - 내경이 2.1mm 이하의컬럼을말하며높은검출감도를제공합니다. Wide bore column mm 내경을가진컬럼을말하며많은양의시료를 loading 할수있습니다. 2. Particle Shape Particle 의모양은구형과 Irregular 형 2 가지입니다. 구형 particle - 구형 particle 은점성의이동상 (ex. 50:50(v/v) methanol-water) 을사용할때 column 의 back pressure 를줄이고오랜 column 수명을제공합니다. Irregular particle - 높은표면적과 carbon loads 를갖으며보통높은 resolution 이필요할때사용합니다. ( 분취용에유리함 ) 3. Particle Size. 대부분의 particle size는 를갖습니다. particle이작을수록높은 efficiency와복잡한시료의분석이가능하지만대부분은 5 or 10 의 packing 을사용합니다. Particle이작으면그만큼 back pressure도많이걸리기때문입니다. Pore size 란 Particle 의 pore 와 cavities 의평균 size 를말합니다. 대부분 60-10,000 사이입니다. 큰 pore 는큰 molecule 이 particle 표면에오래머무를수있도록해줍니다. M.W 가 2,000 이하일때는 150 이하의 pore size 를선택하고 2,000 보다큰 MW 를가진시료의경우에는 300 또는그이상의 pores size 를선택하여줍니다 6. Bonding Type. Bonding type 이란 Base silica 에고정상이어떤 mode 로붙어있는지를말합니다. Monomeric - Monomeric phase 는 base silica 에단일 point 로고정상이결합되어있는것을말합니다. Monomeric bonding 은빠른평형과높은컬럼효율을제공합니다. Polymeric - Polymeric Phase 는 base silica 에 multi point 로고정상이결합되어있는것을말합니다. 이는높은 aquous 이동상을사용시에컬럼의안전성을증가시킵니다. 또한시료의높은 loading 양도가능합니다. 7. Carbon Load Carbon Load란 Base material에붙어있는고정상의양을말합니다. 보통 carbon의percentage로표시합니다. 높은 carbon load는 Hydrophobic한시료에서더큰 resolution과오랜머무름성을제공합니다. 낮은 carbon load는다른선택성을가진시료분석시에빠른 run time을가질수있게합니다. 4. Surface Area. 8. EndCapping. 표면적은 particle 외각전체면적과 pore 내부의전체면적을더한 End Capping이란처음 bonding 한후에표면에남은 silanol기들을것을 gram당 m2로표시한것입니다. 따라서높은표면적은복잡한짧은 Hydrocarbon chain으로 capping하는것을말합니다. 시료분석시에더높은 retention과 capacity 그리고 resolution을제공합니다. 47

47 Ordering Informations ProntoSIL HPLC Columns Page ProntoSIL C18(C8) ace-eps Columns(60A, 120A, 200A, 300A) ProntoSIL C18 H Columns(60A, 120A, 200A, 300A) ProntoSIL C18(C8) SH Columns(60A, 120A, 200A, 300A) ProntoSIL C18 AQ Columns(60A, 120A, 200A, 300A) ProntoSIL Enviro C18 Columns(5um, 6um, 7um) ProntoSIL Hypersorb ODS Columns(3um, 5um) ProntoSIL Spheribond ODS Columns(3um, 5um, 10um) ProntoSIL Eurobond C18 Columns(5um) ProntoSIL C30 Columns(3um, 5um, 10um) ProntoSIL AMINO Columns(3um, 5um, 10um) ProntoSIL Silica Columns(3um, 5um) ProntoSIL Phenyl Columns(3um, 5um, 10um) ProntoSIL CN Columns(3um, 5um, 10um) ProntoSIL DIOL Columns(3um, 5um, 10um) Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 48

48 ProntoSIL C18(C8) ace-eps Columns(60A, 120A, 200A, 300A) 0146F18APS030 ProntoSIL C18 ace-eps Guard 3um 14 x 4.6mm 1203F18APS050 ProntoSIL C18 ace-eps 5um 125 x 3.0mm 0104F18APS030 ProntoSIL C18 ace-eps Guard 3um 14 x 1202F18APS050 ProntoSIL C18 ace-eps 5um 125 x 2.0mm 1046F18APS030 ProntoSIL C18 ace-eps 3um 100 x 4.6mm 1546F18APS050 ProntoSIL C18 ace-eps 5um 150 x 4.6mm 1004F18APS030 ProntoSIL C18 ace-eps 3um 100 x 1504F18APS050 ProntoSIL C18 ace-eps 5um 150 x 1003F18APS030 ProntoSIL C18 ace-eps 3um 100 x 3.0mm 1503F18APS050 ProntoSIL C18 ace-eps 5um 150 x 3.0mm 1002F18APS030 ProntoSIL C18 ace-eps 3um 100 x 2.0mm 1502F18APS050 ProntoSIL C18 ace-eps 5um 150 x 2.0mm 1246F18APS030 ProntoSIL C18 ace-eps 3um 125 x 4.6mm 2046F18APS050 ProntoSIL C18 ace-eps 5um 200 x 4.6mm 1204F18APS030 ProntoSIL C18 ace-eps 3um 125 x 2004F18APS050 ProntoSIL C18 ace-eps 5um 200 x 1203F18APS030 ProntoSIL C18 ace-eps 3um 125 x 3.0mm 2003F18APS050 ProntoSIL C18 ace-eps 5um 200 x 3.0mm 1202F18APS030 ProntoSIL C18 ace-eps 3um 125 x 2.0mm 2002F18APS050 ProntoSIL C18 ace-eps 5um 200 x 2.0mm 1546F18APS030 ProntoSIL C18 ace-eps 3um 150 x 4.6mm 2546F18APS050 ProntoSIL C18 ace-eps 5um 250 x 4.6mm 1504F18APS030 ProntoSIL C18 ace-eps 3um 150 x 2504F18APS050 ProntoSIL C18 ace-eps 5um 250 x 1503F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS030 10P4F18APS030 12P4F18APS030 15P4F18APS030 20P4F18APS030 25P4F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS050 ProntoSIL C18 ace-eps 3um 150 x 3.0mm ProntoSIL C18 ace-eps 3um 150 x 2.0mm ProntoSIL C18 ace-eps 3um 200 x 4.6mm ProntoSIL C18 ace-eps 3um 200 x ProntoSIL C18 ace-eps 3um 200 x 3.0mm ProntoSIL C18 ace-eps 3um 200 x 2.0mm ProntoSIL C18 ace-eps 3um 250 x 4.6mm ProntoSIL C18 ace-eps 3um 250 x ProntoSIL C18 ace-eps 3um 250 x 3.0mm ProntoSIL C18 ace-eps 3um 250 x 2.0mm ProntoSIL C18 ace-eps PEEK column 3um 100 x ProntoSIL C18 ace-eps PEEK column 3um 125 x ProntoSIL C18 ace-eps PEEK column 3um 150 x ProntoSIL C18 ace-eps PEEK column 3um 200 x ProntoSIL C18 ace-eps PEEK column 3um 250 x ProntoSIL C18 ace-eps Guard 5um 14 x 4.6mm ProntoSIL C18 ace-eps Guard 5um 14 x ProntoSIL C18 ace-eps 5um 100 x 4.6mm ProntoSIL C18 ace-eps 5um 100 x ProntoSIL C18 ace-eps 5um 100 x 3.0mm ProntoSIL C18 ace-eps 5um 100 x 2.0mm ProntoSIL C18 ace-eps 5um 125 x 4.6mm ProntoSIL C18 ace-eps 5um 125 x 2503F18APS F18APS F18APS F18APS F18APS F18APS050 10P4F18APS050 12P4F18APS050 15P4F18APS050 20P4F18APS050 25P4F18APS050 30P4F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS100 ProntoSIL C18 ace-eps 5um 250 x 3.0mm ProntoSIL C18 ace-eps 5um 250 x 2.0mm ProntoSIL C18 ace-eps 5um 300 x 4.6mm ProntoSIL C18 ace-eps 5um 300 x ProntoSIL C18 ace-eps 5um 300 x 3.0mm ProntoSIL C18 ace-eps 5um 300 x 2.0mm ProntoSIL C18 ace-eps PEEK column 5um 100 x ProntoSIL C18 ace-eps PEEK column 5um 125 x ProntoSIL C18 ace-eps PEEK column 5um 150 x ProntoSIL C18 ace-eps PEEK column 5um 200 x ProntoSIL C18 ace-eps PEEK column 5um 250 x ProntoSIL C18 ace-eps PEEK column 5um 300 x ProntoSIL C18 ace-eps Guard 10um 14 x 4.6mm ProntoSIL C18 ace-eps Guard 10um 14 x ProntoSIL C18 ace-eps 10um 100 x 4.6mm ProntoSIL C18 ace-eps 10um 100 x ProntoSIL C18 ace-eps 10um 100 x 3.0mm ProntoSIL C18 ace-eps 10um 100 x 2.0mm ProntoSIL C18 ace-eps 10um 125 x 4.6mm ProntoSIL C18 ace-eps 10um 125 x ProntoSIL C18 ace-eps 10um 125 x 3.0mm ProntoSIL C18(C8) ace-eps Columns 49

49 1202F18APS100 ProntoSIL C18 ace-eps 10um 125 x 2.0mm 2504H18APS030 ProntoSIL C18 ace-eps 3um 250 x 1546F18APS100 ProntoSIL C18 ace-eps 10um 150 x 4.6mm 2503H18APS030 ProntoSIL C18 ace-eps 3um 250 x 3.0mm 1504F18APS100 ProntoSIL C18 ace-eps 10um 150 x 2502H18APS030 ProntoSIL C18 ace-eps 3um 250 x 2.0mm 1503F18APS F18APS F18APS F18APS F18APS F18APS F18APS F18APS100 ProntoSIL C18 ace-eps 10um 150 x 3.0mm ProntoSIL C18 ace-eps 10um 150 x 2.0mm ProntoSIL C18 ace-eps 10um 200 x 4.6mm ProntoSIL C18 ace-eps 10um 200 x ProntoSIL C18 ace-eps 10um 200 x 3.0mm ProntoSIL C18 ace-eps 10um 200 x 2.0mm ProntoSIL C18 ace-eps 10um 250 x 4.6mm ProntoSIL C18 ace-eps 10um 250 x 10P4H18APS030 12P4H18APS030 15P4H18APS030 20P4H18APS030 25P4H18APS030 ProntoSIL C18 ace-eps PEEK column 3um 100 x ProntoSIL C18 ace-eps PEEK column 3um 125 x ProntoSIL C18 ace-eps PEEK column 3um 150 x ProntoSIL C18 ace-eps PEEK column 3um 200 x ProntoSIL C18 ace-eps PEEK column 3um 250 x 2503F18APS100 ProntoSIL C18 ace-eps 10um 250 x 3.0mm 0146K18APS030 ProntoSIL C18 ace-eps Guard 3um 14 x 4.6mm 2502F18APS100 ProntoSIL C18 ace-eps 10um 250 x 2.0mm 0104K18APS030 ProntoSIL C18 ace-eps Guard 3um 14 x 3046F18APS100 ProntoSIL C18 ace-eps 10um 300 x 4.6mm 1046K18APS030 ProntoSIL C18 ace-eps 3um 100 x 4.6mm 3004F18APS100 ProntoSIL C18 ace-eps 10um 300 x 1004K18APS030 ProntoSIL C18 ace-eps 3um 100 x 3003F18APS100 ProntoSIL C18 ace-eps 10um 300 x 3.0mm 1003K18APS030 ProntoSIL C18 ace-eps 3um 100 x 3.0mm ProntoSIL C18(C8) ace-eps Columns 3002F18APS100 10P4F18APS100 12P4F18APS100 15P4F18APS100 20P4F18APS100 25P4F18APS100 30P4F18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS030 ProntoSIL C18 ace-eps 10um 300 x 2.0mm ProntoSIL C18 ace-eps PEEK column 10um 100 x ProntoSIL C18 ace-eps PEEK column 10um 125 x ProntoSIL C18 ace-eps PEEK column 10um 150 x ProntoSIL C18 ace-eps PEEK column 10um 200 x ProntoSIL C18 ace-eps PEEK column 10um 250 x ProntoSIL C18 ace-eps PEEK column 10um 300 x ProntoSIL C18 ace-eps Guard 3um 14 x 4.6mm ProntoSIL C18 ace-eps Guard 3um 14 x ProntoSIL C18 ace-eps 3um 100 x 4.6mm ProntoSIL C18 ace-eps 3um 100 x ProntoSIL C18 ace-eps 3um 100 x 3.0mm ProntoSIL C18 ace-eps 3um 100 x 2.0mm ProntoSIL C18 ace-eps 3um 125 x 4.6mm ProntoSIL C18 ace-eps 3um 125 x 1002K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS K18APS030 10P4K18APS030 ProntoSIL C18 ace-eps 3um 100 x 2.0mm ProntoSIL C18 ace-eps 3um 125 x 4.6mm ProntoSIL C18 ace-eps 3um 125 x ProntoSIL C18 ace-eps 3um 125 x 3.0mm ProntoSIL C18 ace-eps 3um 125 x 2.0mm ProntoSIL C18 ace-eps 3um 150 x 4.6mm ProntoSIL C18 ace-eps 3um 150 x ProntoSIL C18 ace-eps 3um 150 x 3.0mm ProntoSIL C18 ace-eps 3um 150 x 2.0mm ProntoSIL C18 ace-eps 3um 200 x 4.6mm ProntoSIL C18 ace-eps 3um 200 x ProntoSIL C18 ace-eps 3um 200 x 3.0mm ProntoSIL C18 ace-eps 3um 200 x 2.0mm ProntoSIL C18 ace-eps 3um 250 x 4.6mm ProntoSIL C18 ace-eps 3um 250 x ProntoSIL C18 ace-eps 3um 250 x 3.0mm ProntoSIL C18 ace-eps 3um 250 x 2.0mm ProntoSIL C18 ace-eps PEEK column 3um 100 x 1203H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS030 ProntoSIL C18 ace-eps 3um 125 x 3.0mm ProntoSIL C18 ace-eps 3um 125 x 2.0mm ProntoSIL C18 ace-eps 3um 150 x 4.6mm ProntoSIL C18 ace-eps 3um 150 x ProntoSIL C18 ace-eps 3um 150 x 3.0mm ProntoSIL C18 ace-eps 3um 150 x 2.0mm ProntoSIL C18 ace-eps 3um 200 x 4.6mm ProntoSIL C18 ace-eps 3um 200 x ProntoSIL C18 ace-eps 3um 200 x 3.0mm ProntoSIL C18 ace-eps 3um 200 x 2.0mm ProntoSIL C18 ace-eps 3um 250 x 4.6mm 12P4K18APS030 15P4K18APS030 20P4K18APS030 25P4K18APS H18APS H18APS H18APS H18APS050 ProntoSIL C18 ace-eps PEEK column 3um 125 x ProntoSIL C18 ace-eps PEEK column 3um 150 x ProntoSIL C18 ace-eps PEEK column 3um 200 x ProntoSIL C18 ace-eps PEEK column 3um 250 x ProntoSIL C18 ace-eps Guard 5um 14 x 4.6mm ProntoSIL C18 ace-eps Guard 5um 14 x ProntoSIL C18 ace-eps 5um 100 x 4.6mm ProntoSIL C18 ace-eps 5um 100 x 50

50 1003H18APS050 ProntoSIL C18 ace-eps 5um 100 x 3.0mm 2046K18APS050 ProntoSIL C18 ace-eps 5um 200 x 4.6mm 1002H18APS050 ProntoSIL C18 ace-eps 5um 100 x 2.0mm 2004K18APS050 ProntoSIL C18 ace-eps 5um 200 x 1246H18APS050 ProntoSIL C18 ace-eps 5um 125 x 4.6mm 2003K18APS050 ProntoSIL C18 ace-eps 5um 200 x 3.0mm 1204H18APS050 ProntoSIL C18 ace-eps 5um 125 x 2002K18APS050 ProntoSIL C18 ace-eps 5um 200 x 2.0mm 1203H18APS050 ProntoSIL C18 ace-eps 5um 125 x 3.0mm 2546K18APS050 ProntoSIL C18 ace-eps 5um 250 x 4.6mm 1202H18APS050 ProntoSIL C18 ace-eps 5um 125 x 2.0mm 2504K18APS050 ProntoSIL C18 ace-eps 5um 250 x 1546H18APS050 ProntoSIL C18 ace-eps 5um 150 x 4.6mm 2503K18APS050 ProntoSIL C18 ace-eps 5um 250 x 3.0mm 1504H18APS050 ProntoSIL C18 ace-eps 5um 150 x 2502K18APS050 ProntoSIL C18 ace-eps 5um 250 x 2.0mm 1503H18APS050 ProntoSIL C18 ace-eps 5um 150 x 3.0mm 3046K18APS050 ProntoSIL C18 ace-eps 5um 300 x 4.6mm 1502H18APS050 ProntoSIL C18 ace-eps 5um 150 x 2.0mm 3004K18APS050 ProntoSIL C18 ace-eps 5um 300 x 2046H18APS050 ProntoSIL C18 ace-eps 5um 200 x 4.6mm 3003K18APS050 ProntoSIL C18 ace-eps 5um 300 x 3.0mm 2004H18APS050 ProntoSIL C18 ace-eps 5um 200 x 3002K18APS050 ProntoSIL C18 ace-eps 5um 300 x 2.0mm 2003H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS H18APS050 10P4H18APS050 12P4H18APS050 15P4H18APS050 20P4H18APS050 25P4H18APS050 30P4H18APS050 ProntoSIL C18 ace-eps 5um 200 x 3.0mm ProntoSIL C18 ace-eps 5um 200 x 2.0mm ProntoSIL C18 ace-eps 5um 250 x 4.6mm ProntoSIL C18 ace-eps 5um 250 x ProntoSIL C18 ace-eps 5um 250 x 3.0mm ProntoSIL C18 ace-eps 5um 250 x 2.0mm ProntoSIL C18 ace-eps 5um 300 x 4.6mm ProntoSIL C18 ace-eps 5um 300 x ProntoSIL C18 ace-eps 5um 300 x 3.0mm ProntoSIL C18 ace-eps 5um 300 x 2.0mm ProntoSIL C18 ace-eps PEEK column 5um 100 x ProntoSIL C18 ace-eps PEEK column 5um 125 x ProntoSIL C18 ace-eps PEEK column 5um 150 x ProntoSIL C18 ace-eps PEEK column 5um 200 x ProntoSIL C18 ace-eps PEEK column 5um 250 x ProntoSIL C18 ace-eps PEEK column 5um 300 x 10P4K18APS050 12P4K18APS050 15P4K18APS050 20P4K18APS050 25P4K18APS050 30P4K18APS F08APS F08APS F08APS F08APS F08APS F08APS F08APS F08APS F08APS F08APS050 ProntoSIL C18 ace-eps PEEK column 5um 100 x ProntoSIL C18 ace-eps PEEK column 5um 125 x ProntoSIL C18 ace-eps PEEK column 5um 150 x ProntoSIL C18 ace-eps PEEK column 5um 200 x ProntoSIL C18 ace-eps PEEK column 5um 250 x ProntoSIL C18 ace-eps PEEK column 5um 300 x ProntoSIL C8 ace-eps Guard 5um 14 x 4.6mm ProntoSIL C8 ace-eps Guard 5um 14 x ProntoSIL C8 ace-eps 5um 100 x 4.6mm ProntoSIL C8 ace-eps 5um 100 x ProntoSIL C8 ace-eps 5um 100 x 3.0mm ProntoSIL C8 ace-eps 5um 100 x 2.0mm ProntoSIL C8 ace-eps 5um 125 x 4.6mm ProntoSIL C8 ace-eps 5um 125 x ProntoSIL C8 ace-eps 5um 125 x 3.0mm ProntoSIL C8 ace-eps 5um 125 x 2.0mm ProntoSIL C18(C8) ace-eps Columns 0146K18APS050 ProntoSIL C18 ace-eps Guard 5um 14 x 4.6mm 1546F08APS050 ProntoSIL C8 ace-eps 5um 150 x 4.6mm 0104K18APS050 ProntoSIL C18 ace-eps Guard 5um 14 x 1504F08APS050 ProntoSIL C8 ace-eps 5um 150 x 1046K18APS050 ProntoSIL C18 ace-eps 5um 100 x 4.6mm 1503F08APS050 ProntoSIL C8 ace-eps 5um 150 x 3.0mm 1004K18APS050 ProntoSIL C18 ace-eps 5um 100 x 1502F08APS050 ProntoSIL C8 ace-eps 5um 150 x 2.0mm 1003K18APS050 ProntoSIL C18 ace-eps 5um 100 x 3.0mm 2046F08APS050 ProntoSIL C8 ace-eps 5um 200 x 4.6mm 1002K18APS050 ProntoSIL C18 ace-eps 5um 100 x 2.0mm 2004F08APS050 ProntoSIL C8 ace-eps 5um 200 x 1246K18APS050 ProntoSIL C18 ace-eps 5um 125 x 4.6mm 2003F08APS050 ProntoSIL C8 ace-eps 5um 200 x 3.0mm 1204K18APS050 ProntoSIL C18 ace-eps 5um 125 x 2002F08APS050 ProntoSIL C8 ace-eps 5um 200 x 2.0mm 1203K18APS050 ProntoSIL C18 ace-eps 5um 125 x 3.0mm 2546F08APS050 ProntoSIL C8 ace-eps 5um 250 x 4.6mm 1202K18APS050 ProntoSIL C18 ace-eps 5um 125 x 2.0mm 2504F08APS050 ProntoSIL C8 ace-eps 5um 250 x 1546K18APS050 ProntoSIL C18 ace-eps 5um 150 x 4.6mm 2503F08APS050 ProntoSIL C8 ace-eps 5um 250 x 3.0mm 1504K18APS050 ProntoSIL C18 ace-eps 5um 150 x 2502F08APS050 ProntoSIL C8 ace-eps 5um 250 x 2.0mm 1503K18APS050 ProntoSIL C18 ace-eps 5um 150 x 3.0mm 3046F08APS050 ProntoSIL C8 ace-eps 5um 300 x 4.6mm 1502K18APS050 ProntoSIL C18 ace-eps 5um 150 x 2.0mm 3004F08APS050 ProntoSIL C8 ace-eps 5um 300 x 51

51 3003F08APS F08APS050 10P4F08APS050 12P4F08APS050 15P4F08APS050 20P4F08APS050 25P4F08APS050 30P4F08APS050 ProntoSIL C8 ace-eps 5um 300 x 3.0mm ProntoSIL C8 ace-eps 5um 300 x 2.0mm ProntoSIL C8 ace-eps PEEK column 5um 100 x ProntoSIL C8 ace-eps PEEK column 5um 125 x ProntoSIL C8 ace-eps PEEK column 5um 150 x ProntoSIL C8 ace-eps PEEK column 5um 200 x ProntoSIL C8 ace-eps PEEK column 5um 250 x ProntoSIL C8 ace-eps PEEK column 5um 300 x ProntoSIL C18(C8) ace-eps Columns Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 52

52 ProntoSIL C18 H Columns(60A, 120A, 200A, 300A) 0146C185PS030 ProntoSIL 60-3-C18H Guard 3um 14 x 4.6mm 2046C185PS050 ProntoSIL 60-5-C18H 5um 200 x 4.6mm 0104C185PS030 ProntoSIL 60-3-C18H Guard 3um 14 x 2004C185PS050 ProntoSIL 60-5-C18H 5um 200 x 1046C185PS030 ProntoSIL 60-3-C18H 3um 100 x 4.6mm 2003C185PS050 ProntoSIL 60-5-C18H 5um 200 x 3.0mm 1004C185PS030 ProntoSIL 60-3-C18H 3um 100 x 2002C185PS050 ProntoSIL 60-5-C18H 5um 200 x 2.0mm 1003C185PS030 ProntoSIL 60-3-C18H 3um 100 x 3.0mm 2546C185PS050 ProntoSIL 60-5-C18H 5um 250 x 4.6mm 1002C185PS030 ProntoSIL 60-3-C18H 3um 100 x 2.0mm 2504C185PS050 ProntoSIL 60-5-C18H 5um 250 x 1246C185PS030 ProntoSIL 60-3-C18H 3um 125 x 4.6mm 2503C185PS050 ProntoSIL 60-5-C18H 5um 250 x 3.0mm 1204C185PS030 ProntoSIL 60-3-C18H 3um 125 x 2502C185PS050 ProntoSIL 60-5-C18H 5um 250 x 2.0mm 1203C185PS030 ProntoSIL 60-3-C18H 3um 125 x 3.0mm 3046C185PS050 ProntoSIL 60-5-C18H 5um 300 x 4.6mm 1202C185PS030 ProntoSIL 60-3-C18H 3um 125 x 2.0mm 3004C185PS050 ProntoSIL 60-5-C18H 5um 300 x 1546C185PS030 ProntoSIL 60-3-C18H 3um 150 x 4.6mm 3003C185PS050 ProntoSIL 60-5-C18H 5um 300 x 3.0mm 1504C185PS030 ProntoSIL 60-3-C18H 3um 150 x 3002C185PS050 ProntoSIL 60-5-C18H 5um 300 x 2.0mm 1503C185PS C185PS C185PS C185PS C185PS C185PS C185PS C185PS C185PS C185PS030 ProntoSIL 60-3-C18H 3um 150 x 3.0mm ProntoSIL 60-3-C18H 3um 150 x 2.0mm ProntoSIL 60-3-C18H 3um 200 x 4.6mm ProntoSIL 60-3-C18H 3um 200 x ProntoSIL 60-3-C18H 3um 200 x 3.0mm ProntoSIL 60-3-C18H 3um 200 x 2.0mm ProntoSIL 60-3-C18H 3um 250 x 4.6mm ProntoSIL 60-3-C18H 3um 250 x ProntoSIL 60-3-C18H 3um 250 x 3.0mm ProntoSIL 60-3-C18H 3um 250 x 2.0mm 10P4C185PS050 12P4C185PS050 15P4C185PS050 20P4C185PS050 25P4C185PS050 30P4C185PS F185PS F185PS F185PS F185PS030 ProntoSIL 60-5-C18H PEEK column 5um 100 x ProntoSIL 60-5-C18H PEEK column 5um 125 x ProntoSIL 60-5-C18H PEEK column 5um 150 x ProntoSIL 60-5-C18H PEEK column 5um 200 x PontoSIL 60-5-C18H PEEK column 5um 250 x ProntoSIL 60-5-C18H PEEK column 5um 300 x ProntoSIL C18H Guard 3um 14 x 4.6mm ProntoSIL C18H Guard 3um 14 x ProntoSIL C18H 3um 100 x 4.6mm ProntoSIL C18H 3um 100 x ProntoSIL C18 H Columns 10P4C185PS030 ProntoSIL 60-3-C18H PEEK column 3um 100 x 1003F185PS030 ProntoSIL C18H 3um 100 x 3.0mm 12P4C185PS030 ProntoSIL 60-3-C18H PEEK column 3um 125 x 1002F185PS030 ProntoSIL C18H 3um 100 x 2.0mm 15P4C185PS030 ProntoSIL 60-3-C18H PEEK column 3um 150 x 1246F185PS030 ProntoSIL C18H 3um 125 x 4.6mm 20P4C185PS030 ProntoSIL 60-3-C18H PEEK column 3um 200 x 1204F185PS030 ProntoSIL C18H 3um 125 x 25P4C185PS030 ProntoSIL 60-3-C18H PEEK column 3um 250 x 1203F185PS030 ProntoSIL C18H 3um 125 x 3.0mm 0146C185PS050 ProntoSIL 60-5-C18H Guard 5um 14 x 4.6mm 1202F185PS030 ProntoSIL C18H 3um 125 x 2.0mm 0104C185PS050 ProntoSIL 60-5-C18H Guard 5um 14 x 1546F185PS030 ProntoSIL C18H 3um 150 x 4.6mm 1046C185PS050 ProntoSIL 60-5-C18H 5um 100 x 4.6mm 1504F185PS030 ProntoSIL C18H 3um 150 x 1004C185PS050 ProntoSIL 60-5-C18H 5um 100 x 1503F185PS030 ProntoSIL C18H 3um 150 x 3.0mm 1003C185PS050 ProntoSIL 60-5-C18H 5um 100 x 3.0mm 1502F185PS030 ProntoSIL C18H 3um 150 x 2.0mm 1002C185PS050 ProntoSIL 60-5-C18H 5um 100 x 2.0mm 2046F185PS030 ProntoSIL C18H 3um 200 x 4.6mm 1246C185PS050 ProntoSIL 60-5-C18H 5um 125 x 4.6mm 2004F185PS030 ProntoSIL C18H 3um 200 x 1204C185PS050 ProntoSIL 60-5-C18H 5um 125 x 2003F185PS030 ProntoSIL C18H 3um 200 x 3.0mm 1203C185PS050 ProntoSIL 60-5-C18H 5um 125 x 3.0mm 2002F185PS030 ProntoSIL C18H 3um 200 x 2.0mm 1202C185PS050 ProntoSIL 60-5-C18H 5um 125 x 2.0mm 2546F185PS030 ProntoSIL C18H 3um 250 x 4.6mm 1546C185PS050 ProntoSIL 60-5-C18H 5um 150 x 4.6mm 2504F185PS030 ProntoSIL C18H 3um 250 x 1504C185PS050 ProntoSIL 60-5-C18H 5um 150 x 2503F185PS030 ProntoSIL C18H 3um 250 x 3.0mm 1503C185PS050 ProntoSIL 60-5-C18H 5um 150 x 3.0mm 2502F185PS030 ProntoSIL C18H 3um 250 x 2.0mm 1502C185PS050 ProntoSIL 60-5-C18H 5um 150 x 2.0mm 10P4F185PS030 ProntoSIL C18H PEEK column 3um 100 x 53

53 12P4F185PS030 ProntoSIL C18H PEEK column 3um 125 x 1504F185PS100 ProntoSIL C18H 10um 150 x 15P4F185PS030 ProntoSIL C18H PEEK column 3um 150 x 1503F185PS100 ProntoSIL C18H 10um 150 x 3.0mm 20P4F185PS030 ProntoSIL C18H PEEK column 3um 200 x 1502F185PS100 ProntoSIL C18H 10um 150 x 2.0mm 25P4F185PS030 ProntoSIL C18H PEEK column 3um 250 x 2046F185PS100 ProntoSIL C18H 10um 200 x 4.6mm 0146F185PS050 ProntoSIL C18H Guard 5um 14 x 4.6mm 2004F185PS100 ProntoSIL C18H 10um 200 x 0104F185PS050 ProntoSIL C18H Guard 5um 14 x 2003F185PS100 ProntoSIL C18H 10um 200 x 3.0mm 1046F185PS050 ProntoSIL C18H 5um 100 x 4.6mm 2002F185PS100 ProntoSIL C18H 10um 200 x 2.0mm 1004F185PS050 ProntoSIL C18H 5um 100 x 2546F185PS100 ProntoSIL C18H 10um 250 x 4.6mm 1003F185PS050 ProntoSIL C18H 5um 100 x 3.0mm 2504F185PS100 ProntoSIL C18H 10um 250 x 1002F185PS050 ProntoSIL C18H 5um 100 x 2.0mm 2503F185PS100 ProntoSIL C18H 10um 250 x 3.0mm 1246F185PS050 ProntoSIL C18H 5um 125 x 4.6mm 2502F185PS100 ProntoSIL C18H 10um 250 x 2.0mm 1204F185PS050 ProntoSIL C18H 5um 125 x 3046F185PS100 ProntoSIL C18H 10um 300 x 4.6mm 1203F185PS050 ProntoSIL C18H 5um 125 x 3.0mm 3004F185PS100 ProntoSIL C18H 10um 300 x 1202F185PS050 ProntoSIL C18H 5um 125 x 2.0mm 3003F185PS100 ProntoSIL C18H 10um 300 x 3.0mm 1546F185PS050 ProntoSIL C18H 5um 150 x 4.6mm 3002F185PS100 ProntoSIL C18H 10um 300 x 2.0mm 1504F185PS050 ProntoSIL C18H 5um 150 x 10P4F185PS100 ProntoSIL C18H PEEK column 10um 100 x 1503F185PS050 ProntoSIL C18H 5um 150 x 3.0mm 12P4F185PS100 ProntoSIL C18H PEEK column 10um 125 x 1502F185PS050 ProntoSIL C18H 5um 150 x 2.0mm 15P4F185PS100 ProntoSIL C18H PEEK column 10um 150 x ProntoSIL C18 H Columns 2046F185PS F185PS F185PS F185PS F185PS F185PS F185PS F185PS F185PS F185PS F185PS050 ProntoSIL C18H 5um 200 x 4.6mm ProntoSIL C18H 5um 200 x ProntoSIL C18H 5um 200 x 3.0mm ProntoSIL C18H 5um 200 x 2.0mm ProntoSIL C18H 5um 250 x 4.6mm ProntoSIL C18H 5um 250 x ProntoSIL C18H 5um 250 x 3.0mm ProntoSIL C18H 5um 250 x 2.0mm ProntoSIL C18H 5um 300 x 4.6mm ProntoSIL C18H 5um 300 x ProntoSIL C18H 5um 300 x 3.0mm 20P4F185PS100 25P4F185PS100 30P4F185PS H185PS H185PS H185PS H185PS H185PS H185PS H185PS H185PS030 ProntoSIL C18H PEEK column 10um 200 x ProntoSIL C18H PEEK column 10um 250 x ProntoSIL C18H PEEK column 10um 300 x ProntoSIL C18H Guard 3um 14 x 4.6mm ProntoSIL C18H Guard 3um 14 x ProntoSIL C18H 3um 100 x 4.6mm ProntoSIL C18H 3um 100 x ProntoSIL C18H 3um 100 x 3.0mm ProntoSIL C18H 3um 100 x 2.0mm ProntoSIL C18H 3um 125 x 4.6mm ProntoSIL C18H 3um 125 x 3002F185PS050 ProntoSIL C18H 5um 300 x 2.0mm 1203H185PS030 ProntoSIL C18H 3um 125 x 3.0mm 10P4F185PS050 ProntoSIL C18H PEEK column 5um 100 x 1202H185PS030 ProntoSIL C18H 3um 125 x 2.0mm 12P4F185PS050 ProntoSIL C18H PEEK column 5um 125 x 1546H185PS030 ProntoSIL C18H 3um 150 x 4.6mm 15P4F185PS050 ProntoSIL C18H PEEK column 5um 150 x 1504H185PS030 ProntoSIL C18H 3um 150 x 20P4F185PS050 ProntoSIL C18H PEEK column 5um 200 x 1503H185PS030 ProntoSIL C18H 3um 150 x 3.0mm 25P4F185PS050 ProntoSIL C18H PEEK column 5um 250 x 1502H185PS030 ProntoSIL C18H 3um 150 x 2.0mm 30P4F185PS050 ProntoSIL C18H PEEK column 5um 300 x 2046H185PS030 ProntoSIL C18H 3um 200 x 4.6mm 0146F185PS100 ProntoSIL C18H Guard 10um 14 x 4.6mm 2004H185PS030 ProntoSIL C18H 3um 200 x 0104F185PS100 ProntoSIL C18H Guard 10um 14 x 2003H185PS030 ProntoSIL C18H 3um 200 x 3.0mm 1046F185PS100 ProntoSIL C18H 10um 100 x 4.6mm 2002H185PS030 ProntoSIL C18H 3um 200 x 2.0mm 1004F185PS100 ProntoSIL C18H 10um 100 x 2546H185PS030 ProntoSIL C18H 3um 250 x 4.6mm 1003F185PS100 ProntoSIL C18H 10um 100 x 3.0mm 2504H185PS030 ProntoSIL C18H 3um 250 x 1002F185PS100 ProntoSIL C18H 10um 100 x 2.0mm 2503H185PS030 ProntoSIL C18H 3um 250 x 3.0mm 1246F185PS100 ProntoSIL C18H 10um 125 x 4.6mm 2502H185PS030 ProntoSIL C18H 3um 250 x 2.0mm 1204F185PS100 ProntoSIL C18H 10um 125 x 10P4H185PS030 ProntoSIL C18H PEEK column 3um 100 x 1203F185PS100 ProntoSIL C18H 10um 125 x 3.0mm 12P4H185PS030 ProntoSIL C18H PEEK column 3um 125 x 1202F185PS100 ProntoSIL C18H 10um 125 x 2.0mm 15P4H185PS030 ProntoSIL C18H PEEK column 3um 150 x 1546F185PS100 ProntoSIL C18H 10um 150 x 4.6mm 20P4H185PS030 ProntoSIL C18H PEEK column 3um 200 x 54

54 25P4H185PS030 ProntoSIL C18H PEEK column 3um 250 x 2046K185PS030 ProntoSIL C18H 3um 200 x 4.6mm 0146H185PS050 ProntoSIL C18H Guard 5um 14 x 4.6mm 2004K185PS030 ProntoSIL C18H 3um 200 x 0104H185PS050 ProntoSIL C18H Guard 5um 14 x 2003K185PS030 ProntoSIL C18H 3um 200 x 3.0mm 1046H185PS050 ProntoSIL C18H 5um 100 x 4.6mm 2002K185PS030 ProntoSIL C18H 3um 200 x 2.0mm 1004H185PS050 ProntoSIL C18H 5um 100 x 2546K185PS030 ProntoSIL C18H 3um 250 x 4.6mm 1003H185PS050 ProntoSIL C18H 5um 100 x 3.0mm 2504K185PS030 ProntoSIL C18H 3um 250 x 1002H185PS050 ProntoSIL C18H 5um 100 x 2.0mm 2503K185PS030 ProntoSIL C18H 3um 250 x 3.0mm 1246H185PS050 ProntoSIL C18H 5um 125 x 4.6mm 2502K185PS030 ProntoSIL C18H 3um 250 x 2.0mm 1204H185PS050 ProntoSIL C18H 5um 125 x 10P4K185PS030 ProntoSIL C18H PEEK column 3um 100 x 1203H185PS050 ProntoSIL C18H 5um 125 x 3.0mm 12P4K185PS030 ProntoSIL C18H PEEK column 3um 125 x 1202H185PS050 ProntoSIL C18H 5um 125 x 2.0mm 15P4K185PS030 ProntoSIL C18H PEEK column 3um 150 x 1546H185PS050 ProntoSIL C18H 5um 150 x 4.6mm 20P4K185PS030 ProntoSIL C18H PEEK column 3um 200 x 1504H185PS050 ProntoSIL C18H 5um 150 x 25P4K185PS030 ProntoSIL C18H PEEK column 3um 250 x 1503H185PS050 ProntoSIL C18H 5um 150 x 3.0mm 0146K185PS050 ProntoSIL C18H Guard 5um 14 x 4.6mm 1502H185PS050 ProntoSIL C18H 5um 150 x 2.0mm 0104K185PS050 ProntoSIL C18H Guard 5um 14 x 2046H185PS050 ProntoSIL C18H 5um 200 x 4.6mm 1046K185PS050 ProntoSIL C18H 5um 100 x 4.6mm 2004H185PS050 ProntoSIL C18H 5um 200 x 1004K185PS050 ProntoSIL C18H 5um 100 x 2003H185PS050 ProntoSIL C18H 5um 200 x 3.0mm 1003K185PS050 ProntoSIL C18H 5um 100 x 3.0mm 2002H185PS H185PS H185PS H185PS H185PS H185PS H185PS H185PS H185PS050 10P4H185PS050 12P4H185PS050 ProntoSIL C18H 5um 200 x 2.0mm ProntoSIL C18H 5um 250 x 4.6mm ProntoSIL C18H 5um 250 x ProntoSIL C18H 5um 250 x 3.0mm ProntoSIL C18H 5um 250 x 2.0mm ProntoSIL C18H 5um 300 x 4.6mm ProntoSIL C18H 5um 300 x ProntoSIL C18H 5um 300 x 3.0mm ProntoSIL C18H 5um 300 x 2.0mm ProntoSIL C18H PEEK column 5um 100 x ProntoSIL C18H PEEK column 5um 125 x 1002K185PS K185PS K185PS K185PS K185PS K185PS K185PS K185PS K185PS K185PS K185PS050 ProntoSIL C18H 5um 100 x 2.0mm ProntoSIL C18H 5um 125 x 4.6mm ProntoSIL C18H 5um 125 x ProntoSIL C18H 5um 125 x 3.0mm ProntoSIL C18H 5um 125 x 2.0mm ProntoSIL C18H 5um 150 x 4.6mm ProntoSIL C18H 5um 150 x ProntoSIL C18H 5um 150 x 3.0mm ProntoSIL C18H 5um 150 x 2.0mm ProntoSIL C18H 5um 200 x 4.6mm ProntoSIL C18H 5um 200 x ProntoSIL C18 H Columns 15P4H185PS050 ProntoSIL C18H PEEK column 5um 150 x 2003K185PS050 ProntoSIL C18H 5um 200 x 3.0mm 20P4H185PS050 ProntoSIL C18H PEEK column 5um 200 x 2002K185PS050 ProntoSIL C18H 5um 200 x 2.0mm 25P4H185PS050 ProntoSIL C18H PEEK column 5um 250 x 2546K185PS050 ProntoSIL C18H 5um 250 x 4.6mm 30P4H185PS050 ProntoSIL C18H PEEK column 5um 300 x 2504K185PS050 ProntoSIL C18H 5um 250 x 0146K185PS030 ProntoSIL C18H Guard 3um 14 x 4.6mm 2503K185PS050 ProntoSIL C18H 5um 250 x 3.0mm 0104K185PS030 ProntoSIL C18H Guard 3um 14 x 2502K185PS050 ProntoSIL C18H 5um 250 x 2.0mm 1046K185PS030 ProntoSIL C18H 3um 100 x 4.6mm 3046K185PS050 ProntoSIL C18H 5um 300 x 4.6mm 1004K185PS030 ProntoSIL C18H 3um 100 x 3004K185PS050 ProntoSIL C18H 5um 300 x 1003K185PS030 ProntoSIL C18H 3um 100 x 3.0mm 3003K185PS050 ProntoSIL C18H 5um 300 x 3.0mm 1002K185PS030 ProntoSIL C18H 3um 100 x 2.0mm 3002K185PS050 ProntoSIL C18H 5um 300 x 2.0mm 1246K185PS030 ProntoSIL C18H 3um 125 x 4.6mm 10P4K185PS050 ProntoSIL C18H PEEK column 5um 100 x 1204K185PS030 ProntoSIL C18H 3um 125 x 12P4K185PS050 ProntoSIL C18H PEEK column 5um 125 x 1203K185PS030 ProntoSIL C18H 3um 125 x 3.0mm 15P4K185PS050 ProntoSIL C18H PEEK column 5um 150 x 1202K185PS030 ProntoSIL C18H 3um 125 x 2.0mm 20P4K185PS050 ProntoSIL C18H PEEK column 5um 200 x 1546K185PS030 ProntoSIL C18H 3um 150 x 4.6mm 25P4K185PS050 ProntoSIL C18H PEEK column 5um 250 x 1504K185PS030 ProntoSIL C18H 3um 150 x 30P4K185PS050 ProntoSIL C18H PEEK column 5um 300 x 1503K185PS030 ProntoSIL C18H 3um 150 x 3.0mm 1502K185PS030 ProntoSIL C18H 3um 150 x 2.0mm 55

55 ProntoSIL C18(C8) SH Columns(60A, 120A, 200A, 300A) 0146F180PS030 ProntoSIL C18SH Guard 3um 14 x 4.6mm 1202F180PS050 ProntoSIL C18SH 5um 125 x 2.0mm 0104F180PS030 ProntoSIL C18SH Guard 3um 14 x 1546F180PS050 ProntoSIL C18SH 5um 150 x 4.6mm 1046F180PS030 ProntoSIL C18SH 3um 100 x 4.6mm 1504F180PS050 ProntoSIL C18SH 5um 150 x 1004F180PS030 ProntoSIL C18SH 3um 100 x 1503F180PS050 ProntoSIL C18SH 5um 150 x 3.0mm 1003F180PS030 ProntoSIL C18SH 3um 100 x 3.0mm 1502F180PS050 ProntoSIL C18SH 5um 150 x 2.0mm 1002F180PS030 ProntoSIL C18SH 3um 100 x 2.0mm 2046F180PS050 ProntoSIL C18SH 5um 200 x 4.6mm 1246F180PS030 ProntoSIL C18SH 3um 125 x 4.6mm 2004F180PS050 ProntoSIL C18SH 5um 200 x 1204F180PS030 ProntoSIL C18SH 3um 125 x 2003F180PS050 ProntoSIL C18SH 5um 200 x 3.0mm 1203F180PS030 ProntoSIL C18SH 3um 125 x 3.0mm 2002F180PS050 ProntoSIL C18SH 5um 200 x 2.0mm 1202F180PS030 ProntoSIL C18SH 3um 125 x 2.0mm 2546F180PS050 ProntoSIL C18SH 5um 250 x 4.6mm 1546F180PS030 ProntoSIL C18SH 3um 150 x 4.6mm 2504F180PS050 ProntoSIL C18SH 5um 250 x 1504F180PS030 ProntoSIL C18SH 3um 150 x 2503F180PS050 ProntoSIL C18SH 5um 250 x 3.0mm 1503F180PS030 ProntoSIL C18SH 3um 150 x 3.0mm 2502F180PS050 ProntoSIL C18SH 5um 250 x 2.0mm ProntoSIL C18(C8) SH Columns 1502F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS030 10P4F180PS030 12P4F180PS030 15P4F180PS030 20P4F180PS030 25P4F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS050 ProntoSIL C18SH 3um 150 x 2.0mm ProntoSIL C18SH 3um 200 x 4.6mm ProntoSIL C18SH 3um 200 x ProntoSIL C18SH 3um 200 x 3.0mm ProntoSIL C18SH 3um 200 x 2.0mm ProntoSIL C18SH 3um 250 x 4.6mm ProntoSIL C18SH 3um 250 x ProntoSIL C18SH 3um 250 x 3.0mm ProntoSIL C18SH 3um 250 x 2.0mm ProntoSIL C18SH PEEK column 3um 100 x ProntoSIL C18SH PEEK column 3um 125 x ProntoSIL C18SH PEEK column 3um 150 x ProntoSIL C18SH PEEK column 3um 200 x ProntoSIL C18SH PEEK column 3um 250 x ProntoSIL C18SH Guard 5um 14 x 4.6mm ProntoSIL C18SH Guard 5um 14 x ProntoSIL C18SH 5um 100 x 4.6mm ProntoSIL C18SH 5um 100 x ProntoSIL C18SH 5um 100 x 3.0mm ProntoSIL C18SH 5um 100 x 2.0mm ProntoSIL C18SH 5um 125 x 4.6mm ProntoSIL C18SH 5um 125 x ProntoSIL C18SH 5um 125 x 3.0mm 3046F180PS F180PS F180PS F180PS050 10P4F180PS050 12P4F180PS050 15P4F180PS050 20P4F180PS050 25P4F180PS050 30P4F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS100 ProntoSIL C18SH 5um 300 x 4.6mm ProntoSIL C18SH 5um 300 x ProntoSIL C18SH 5um 300 x 3.0mm ProntoSIL C18SH 5um 300 x 2.0mm ProntoSIL C18SH PEEK column 5um 100 x ProntoSIL C18SH PEEK column 5um 125 x ProntoSIL C18SH PEEK column 5um 150 x ProntoSIL C18SH PEEK column 5um 200 x ProntoSIL C18SH PEEK column 5um 250 x ProntoSIL C18SH PEEK column 5um 300 x ProntoSIL C18SH Guard 10um 14 x 4.6mm ProntoSIL C18SH Guard 10um 14 x ProntoSIL C18SH 10um 100 x 4.6mm ProntoSIL C18SH 10um 100 x ProntoSIL C18SH 10um 100 x 3.0mm ProntoSIL C18SH 10um 100 x 2.0mm ProntoSIL C18SH 10um 125 x 4.6mm ProntoSIL C18SH 10um 125 x ProntoSIL C18SH 10um 125 x 3.0mm ProntoSIL C18SH 10um 125 x 2.0mm ProntoSIL C18SH 10um 150 x 4.6mm ProntoSIL C18SH 10um 150 x ProntoSIL C18SH 10um 150 x 3.0mm 56

56 1502F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS F180PS100 10P4F180PS100 12P4F180PS100 15P4F180PS100 20P4F180PS100 ProntoSIL C18SH 10um 150 x 2.0mm ProntoSIL C18SH 10um 200 x 4.6mm ProntoSIL C18SH 10um 200 x ProntoSIL C18SH 10um 200 x 3.0mm ProntoSIL C18SH 10um 200 x 2.0mm ProntoSIL C18SH 10um 250 x 4.6mm ProntoSIL C18SH 10um 250 x ProntoSIL C18SH 10um 250 x 3.0mm ProntoSIL C18SH 10um 250 x 2.0mm ProntoSIL C18SH 10um 300 x 4.6mm ProntoSIL C18SH 10um 300 x ProntoSIL C18SH 10um 300 x 3.0mm ProntoSIL C18SH 10um 300 x 2.0mm ProntoSIL C18SH PEEK column 10um 100 x ProntoSIL C18SH PEEK column 10um 125 x ProntoSIL C18SH PEEK column 10um 150 x ProntoSIL C18SH PEEK column 10um 200 x 12P4F080PS030 15P4F080PS030 20P4F080PS030 25P4F080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS050 ProntoSIL C8 SH PEEK column 3um 125 x ProntoSIL C8 SH PEEK column 3um 150 x ProntoSIL C8 SH PEEK column 3um 200 x ProntoSIL C8 SH PEEK column 3um 250 x ProntoSIL 60-5-C8 SH Guard 5um 14 x 4.6mm ProntoSIL 60-5-C8 SH Guard 5um 14 x ProntoSIL 60-5-C8 SH 5um 100 x 4.6mm ProntoSIL 60-5-C8 SH 5um 100 x ProntoSIL 60-5-C8 SH 5um 100 x 3.0mm ProntoSIL 60-5-C8 SH 5um 100 x 2.0mm ProntoSIL 60-5-C8 SH 5um 125 x 4.6mm ProntoSIL 60-5-C8 SH 5um 125 x ProntoSIL 60-5-C8 SH 5um 125 x 3.0mm ProntoSIL 60-5-C8 SH 5um 125 x 2.0mm ProntoSIL 60-5-C8 SH 5um 150 x 4.6mm ProntoSIL 60-5-C8 SH 5um 150 x ProntoSIL 60-5-C8 SH 5um 150 x 3.0mm 25P4F180PS100 30P4F180PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS030 10P4F080PS030 ProntoSIL C18SH PEEK column 10um 250 x ProntoSIL C18SH PEEK column 10um 300 x ProntoSIL C8 SH Guard 3um 14 x 4.6mm ProntoSIL C8 SH Guard 3um 14 x ProntoSIL C8 SH 3um 100 x 4.6mm ProntoSIL C8 SH 3um 100 x ProntoSIL C8 SH 3um 100 x 3.0mm ProntoSIL C8 SH 3um 100 x 2.0mm ProntoSIL C8 SH 3um 125 x 4.6mm ProntoSIL C8 SH 3um 125 x ProntoSIL C8 SH 3um 125 x 3.0mm ProntoSIL C8 SH 3um 125 x 2.0mm ProntoSIL C8 SH 3um 150 x 4.6mm ProntoSIL C8 SH 3um 150 x ProntoSIL C8 SH 3um 150 x 3.0mm ProntoSIL C8 SH 3um 150 x 2.0mm ProntoSIL C8 SH 3um 200 x 4.6mm ProntoSIL C8 SH 3um 200 x ProntoSIL C8 SH 3um 200 x 3.0mm ProntoSIL C8 SH 3um 200 x 2.0mm ProntoSIL C8 SH 3um 250 x 4.6mm ProntoSIL C8 SH 3um 250 x ProntoSIL C8 SH 3um 250 x 3.0mm ProntoSIL C8 SH 3um 250 x 2.0mm ProntoSIL C8 SH PEEK column 3um 100 x 1502C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS C080PS050 10P4C080PS050 12P4C080PS050 15P4C080PS050 20P4C080PS050 25P4C080PS050 30P4C080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS050 ProntoSIL 60-5-C8 SH 5um 150 x 2.0mm ProntoSIL 60-5-C8 SH 5um 200 x 4.6mm ProntoSIL 60-5-C8 SH 5um 200 x ProntoSIL 60-5-C8 SH 5um 200 x 3.0mm ProntoSIL 60-5-C8 SH 5um 200 x 2.0mm ProntoSIL 60-5-C8 SH 5um 250 x 4.6mm ProntoSIL 60-5-C8 SH 5um 250 x ProntoSIL 60-5-C8 SH 5um 250 x 3.0mm ProntoSIL 60-5-C8 SH 5um 250 x 2.0mm ProntoSIL 60-5-C8 SH 5um 300 x 4.6mm ProntoSIL 60-5-C8 SH 5um 300 x ProntoSIL 60-5-C8 SH 5um 300 x 3.0mm ProntoSIL 60-5-C8 SH 5um 300 x 2.0mm ProntoSIL 60-5-C8 SH PEEK column 5um 100 x ProntoSIL 60-5-C8 SH PEEK column 5um 125 x ProntoSIL 60-5-C8 SH PEEK column 5um 150 x ProntoSIL 60-5-C8 SH PEEK column 5um 200 x ProntoSIL 60-5-C8 SH PEEK column 5um 250 x ProntoSIL 60-5-C8 SH PEEK column 5um 300 x ProntoSIL C8 SH Guard 5um 14 x 4.6mm ProntoSIL C8 SH Guard 5um 14 x ProntoSIL C8 SH 5um 100 x 4.6mm ProntoSIL C8 SH 5um 100 x ProntoSIL C8 SH 5um 100 x 3.0mm ProntoSIL C8 SH 5um 100 x 2.0mm ProntoSIL C8 SH 5um 125 x 4.6mm ProntoSIL C8 SH 5um 125 x ProntoSIL C18(C8) SH Columns 57

57 1203F080PS050 ProntoSIL C8 SH 5um 125 x 3.0mm 2504F080PS100 ProntoSIL C8 SH 10um 250 x 1202F080PS050 ProntoSIL C8 SH 5um 125 x 2.0mm 2503F080PS100 ProntoSIL C8 SH 10um 250 x 3.0mm 1546F080PS050 ProntoSIL C8 SH 5um 150 x 4.6mm 2502F080PS100 ProntoSIL C8 SH 10um 250 x 2.0mm 1504F080PS050 ProntoSIL C8 SH 5um 150 x 3046F080PS100 ProntoSIL C8 SH 10um 300 x 4.6mm 1503F080PS050 ProntoSIL C8 SH 5um 150 x 3.0mm 3004F080PS100 ProntoSIL C8 SH 10um 300 x 1502F080PS050 ProntoSIL C8 SH 5um 150 x 2.0mm 3003F080PS100 ProntoSIL C8 SH 10um 300 x 3.0mm 2046F080PS050 ProntoSIL C8 SH 5um 200 x 4.6mm 3002F080PS100 ProntoSIL C8 SH 10um 300 x 2.0mm 2004F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS050 ProntoSIL C8 SH 5um 200 x ProntoSIL C8 SH 5um 200 x 3.0mm ProntoSIL C8 SH 5um 200 x 2.0mm ProntoSIL C8 SH 5um 250 x 4.6mm ProntoSIL C8 SH 5um 250 x ProntoSIL C8 SH 5um 250 x 3.0mm ProntoSIL C8 SH 5um 250 x 2.0mm ProntoSIL C8 SH 5um 300 x 4.6mm 10P4F080PS100 12P4F080PS100 15P4F080PS100 20P4F080PS100 25P4F080PS100 ProntoSIL C8 SH PEEK column 10um 100 x ProntoSIL C8 SH PEEK column 10um 125 x ProntoSIL C8 SH PEEK column 10um 150 x ProntoSIL C8 SH PEEK column 10um 200 x ProntoSIL C8 SH PEEK column 10um 250 x ProntoSIL C18(C8) SH Columns 3004F080PS F080PS F080PS050 10P4F080PS050 12P4F080PS050 15P4F080PS050 20P4F080PS050 25P4F080PS050 30P4F080PS F080PS F080PS100 ProntoSIL C8 SH 5um 300 x ProntoSIL C8 SH 5um 300 x 3.0mm ProntoSIL C8 SH 5um 300 x 2.0mm ProntoSIL C8 SH PEEK column 5um 100 x ProntoSIL C8 SH PEEK column 5um 125 x ProntoSIL C8 SH PEEK column 5um 150 x ProntoSIL C8 SH PEEK column 5um 200 x ProntoSIL C8 SH PEEK column 5um 250 x ProntoSIL C8 SH PEEK column 5um 300 x ProntoSIL C8 SH Guard 10um 14 x 4.6mm ProntoSIL C8 SH Guard 10um 14 x 30P4F080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS030 ProntoSIL C8 SH PEEK column 10um 300 x ProntoSIL C8 SH Guard 3um 14 x 4.6mm ProntoSIL C8 SH Guard 3um 14 x ProntoSIL C8 SH 3um 100 x 4.6mm ProntoSIL C8 SH 3um 100 x 4.6mm ProntoSIL C8 SH 3um 100 x 3.0mm ProntoSIL C8 SH 3um 100 x 2.0mm ProntoSIL C8 SH 3um 125 x 4.6mm ProntoSIL C8 SH 3um 125 x ProntoSIL C8 SH 3um 125 x 3.0mm ProntoSIL C8 SH 3um 125 x 2.0mm ProntoSIL C8 SH 3um 150 x 4.6mm ProntoSIL C8 SH 3um 150 x ProntoSIL C8 SH 3um 150 x 3.0mm 1046F080PS100 ProntoSIL C8 SH 10um 100 x 4.6mm 1502H080PS030 ProntoSIL C8 SH 3um 150 x 2.0mm 1004F080PS100 ProntoSIL C8 SH 10um 100 x 2046H080PS030 ProntoSIL C8 SH 3um 200 x 4.6mm 1003F080PS100 ProntoSIL C8 SH 10um 100 x 3.0mm 2004H080PS030 ProntoSIL C8 SH 3um 200 x 1002F080PS100 ProntoSIL C8 SH 10um 100 x 2.0mm 2003H080PS030 ProntoSIL C8 SH 3um 200 x 3.0mm 1246F080PS100 ProntoSIL C8 SH 10um 125 x 4.6mm 2002H080PS030 ProntoSIL C8 SH 3um 200 x 2.0mm 1204F080PS100 ProntoSIL C8 SH 10um 125 x 2546H080PS030 ProntoSIL C8 SH 3um 250 x 4.6mm 1203F080PS100 ProntoSIL C8 SH 10um 125 x 3.0mm 2504H080PS030 ProntoSIL C8 SH 3um 250 x 1202F080PS100 ProntoSIL C8 SH 10um 125 x 2.0mm 2503H080PS030 ProntoSIL C8 SH 3um 250 x 3.0mm 1546F080PS100 ProntoSIL C8 SH 10um 150 x 4.6mm 2502H080PS030 ProntoSIL C8 SH 3um 250 x 2.0mm 1504F080PS F080PS F080PS F080PS F080PS F080PS F080PS F080PS100 ProntoSIL C8 SH 10um 150 x ProntoSIL C8 SH 10um 150 x 3.0mm ProntoSIL C8 SH 10um 150 x 2.0mm ProntoSIL C8 SH 10um 200 x 4.6mm ProntoSIL C8 SH 10um 200 x ProntoSIL C8 SH 10um 200 x 3.0mm ProntoSIL C8 SH 10um 200 x 2.0mm ProntoSIL C8 SH 10um 250 x 4.6mm 10P4H080PS030 12P4H080PS030 15P4H080PS030 20P4H080PS030 25P4H080PS030 ProntoSIL C8 SH PEEK column 3um 100 x ProntoSIL C8 SH PEEK column 3um 125 x ProntoSIL C8 SH PEEK column 3um 150 x ProntoSIL C8 SH PEEK column 3um 200 x ProntoSIL C8 SH PEEK column 3um 250 x 58

58 0146H080PS050 ProntoSIL C8 SH Guard 5um 14 x 4.6mm 1504K080PS030 ProntoSIL C8 SH 3um 150 x 0104H080PS050 ProntoSIL C8 SH Guard 5um 14 x 1503K080PS030 ProntoSIL C8 SH 3um 150 x 3.0mm 1046H080PS050 ProntoSIL C8 SH 5um 100 x 4.6mm 1502K080PS030 ProntoSIL C8 SH 3um 150 x 2.0mm 1004H080PS050 ProntoSIL C8 SH 5um 100 x 2046K080PS030 ProntoSIL C8 SH 3um 200 x 4.6mm 1003H080PS050 ProntoSIL C8 SH 5um 100 x 3.0mm 2004K080PS030 ProntoSIL C8 SH 3um 200 x 1002H080PS050 ProntoSIL C8 SH 5um 100 x 2.0mm 2003K080PS030 ProntoSIL C8 SH 3um 200 x 3.0mm 1246H080PS050 ProntoSIL C8 SH 5um 125 x 4.6mm 2002K080PS030 ProntoSIL C8 SH 3um 200 x 2.0mm 1204H080PS050 ProntoSIL C8 SH 5um 125 x 2546K080PS030 ProntoSIL C8 SH 3um 250 x 4.6mm 1203H080PS050 ProntoSIL C8 SH 5um 125 x 3.0mm 2504K080PS030 ProntoSIL C8 SH 3um 250 x 1202H080PS050 ProntoSIL C8 SH 5um 125 x 2.0mm 2503K080PS030 ProntoSIL C8 SH 3um 250 x 3.0mm 1546H080PS050 ProntoSIL C8 SH 5um 150 x 4.6mm 2502K080PS030 ProntoSIL C8 SH 3um 250 x 2.0mm 1504H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS H080PS050 10P4H080PS050 12P4H080PS050 15P4H080PS050 20P4H080PS050 25P4H080PS050 ProntoSIL C8 SH 5um 150 x ProntoSIL C8 SH 5um 150 x 3.0mm ProntoSIL C8 SH 5um 150 x 2.0mm ProntoSIL C8 SH 5um 200 x 4.6mm ProntoSIL C8 SH 5um 200 x ProntoSIL C8 SH 5um 200 x 3.0mm ProntoSIL C8 SH 5um 200 x 2.0mm ProntoSIL C8 SH 5um 250 x 4.6mm ProntoSIL C8 SH 5um 250 x ProntoSIL C8 SH 5um 250 x 3.0mm ProntoSIL C8 SH 5um 250 x 2.0mm ProntoSIL C8 SH 5um 300 x 4.6mm ProntoSIL C8 SH 5um 300 x ProntoSIL C8 SH 5um 300 x 3.0mm ProntoSIL C8 SH 5um 300 x 2.0mm ProntoSIL C8 SH PEEK column 5um 100 x ProntoSIL C8 SH PEEK column 5um 125 x ProntoSIL C8 SH PEEK column 5um 150 x ProntoSIL C8 SH PEEK column 5um 200 x ProntoSIL C8 SH PEEK column 5um 250 x 10P4K080PS030 12P4K080PS030 15P4K080PS030 20P4K080PS030 25P4K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS050 ProntoSIL C8 SH PEEK column 3um 100 x ProntoSIL C8 SH PEEK column 3um 125 x ProntoSIL C8 SH PEEK column 3um 150 x ProntoSIL C8 SH PEEK column 3um 200 x ProntoSIL C8 SH PEEK column 3um 250 x ProntoSIL C8 SH Guard 5um 14 x 4.6mm ProntoSIL C8 SH Guard 5um 14 x ProntoSIL C8 SH 5um 100 x 4.6mm ProntoSIL C8 SH 5um 100 x ProntoSIL C8 SH 5um 100 x 3.0mm ProntoSIL C8 SH 5um 100 x 2.0mm ProntoSIL C8 SH 5um 125 x 4.6mm ProntoSIL C8 SH 5um 125 x ProntoSIL C8 SH 5um 125 x 3.0mm ProntoSIL C8 SH 5um 125 x 2.0mm ProntoSIL C8 SH 5um 150 x 4.6mm ProntoSIL C8 SH 5um 150 x ProntoSIL C8 SH 5um 150 x 3.0mm ProntoSIL C8 SH 5um 150 x 2.0mm ProntoSIL C8 SH 5um 200 x 4.6mm ProntoSIL C18(C8) SH Columns 30P4H080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS030 ProntoSIL C8 SH PEEK column 5um 300 x ProntoSIL C8 SH Guard 3um 14 x 4.6mm ProntoSIL C8 SH Guard 3um 14 x ProntoSIL C8 SH 3um 100 x 4.6mm ProntoSIL C8 SH 3um 100 x 4.6mm ProntoSIL C8 SH 3um 100 x 3.0mm ProntoSIL C8 SH 3um 100 x 2.0mm ProntoSIL C8 SH 3um 125 x 4.6mm ProntoSIL C8 SH 3um 125 x ProntoSIL C8 SH 3um 125 x 3.0mm ProntoSIL C8 SH 3um 125 x 2.0mm ProntoSIL C8 SH 3um 150 x 4.6mm 2004K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS K080PS050 10P4K080PS050 ProntoSIL C8 SH 5um 200 x ProntoSIL C8 SH 5um 200 x 3.0mm ProntoSIL C8 SH 5um 200 x 2.0mm ProntoSIL C8 SH 5um 250 x 4.6mm ProntoSIL C8 SH 5um 250 x ProntoSIL C8 SH 5um 250 x 3.0mm ProntoSIL C8 SH 5um 250 x 2.0mm ProntoSIL C8 SH 5um 300- x 4.6mm ProntoSIL C8 SH 5um 300- x ProntoSIL C8 SH 5um 300- x 3.0mm ProntoSIL C8 SH 5um 300- x 2.0mm ProntoSIL C8 SH PEEK column 5um 100 x 59

59 12P4K080PS050 15P4K080PS050 20P4K080PS050 25P4K080PS050 30P4K080PS050 ProntoSIL C8 SH PEEK column 5um 125 x ProntoSIL C8 SH PEEK column 5um 150 x ProntoSIL C8 SH PEEK column 5um 200 x ProntoSIL C8 SH PEEK column 5um 250 x ProntoSIL C8 SH PEEK column 5um 300 x ProntoSIL C18 AQ Columns(60A, 120A, 200A, 300A) ProntoSIL C18 AQ Columns 0146F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS030 10P4F184PS030 ProntoSIL C18AQ Guard 3um 14 x 4.6mm ProntoSIL C18AQ Guard 3um 14 x ProntoSIL C18AQ 3um 100 x 4.6mm ProntoSIL C18AQ 3um 100 x ProntoSIL C18AQ 3um 100 x 3.0mm ProntoSIL C18AQ 3um 100 x 2.0mm ProntoSIL C18AQ 3um 125 x 4.6mm ProntoSIL C18AQ 3um 125 x ProntoSIL C18AQ 3um 125 x 3.0mm ProntoSIL C18AQ 3um 125 x 2.0mm ProntoSIL C18AQ 3um 150 x 4.6mm ProntoSIL C18AQ 3um 150 x ProntoSIL C18AQ 3um 150 x 3.0mm ProntoSIL C18AQ 3um 150 x 2.0mm ProntoSIL C18AQ 3um 200 x 4.6mm ProntoSIL C18AQ 3um 200 x ProntoSIL C18AQ 3um 200 x 3.0mm ProntoSIL C18AQ 3um 200 x 2.0mm ProntoSIL C18AQ 3um 250 x 4.6mm ProntoSIL C18AQ 3um 250 x ProntoSIL C18AQ 3um 250 x 3.0mm ProntoSIL C18AQ 3um 250 x 2.0mm ProntoSIL C18AQ PEEK column 3um 100 x 25P4F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS050 ProntoSIL C18AQ PEEK column 3um 250 x ProntoSIL C18AQ Guard 5um 14 x 4.6mm ProntoSIL C18AQ Guard 5um 14 x ProntoSIL C18AQ 5um 100 x 4.6mm ProntoSIL C18AQ 5um 100 x ProntoSIL C18AQ 5um 100 x 3.0mm ProntoSIL C18AQ 5um 100 x 2.0mm ProntoSIL C18AQ 5um 125 x 4.6mm ProntoSIL C18AQ 5um 125 x ProntoSIL C18AQ 5um 125 x 3.0mm ProntoSIL C18AQ 5um 125 x 2.0mm ProntoSIL C18AQ 5um 150 x 4.6mm ProntoSIL C18AQ 5um 150 x ProntoSIL C18AQ 5um 150 x 3.0mm ProntoSIL C18AQ 5um 150 x 2.0mm ProntoSIL C18AQ 5um 200 x 4.6mm ProntoSIL C18AQ 5um 200 x ProntoSIL C18AQ 5um 200 x 3.0mm ProntoSIL C18AQ 5um 200 x 2.0mm ProntoSIL C18AQ 5um 250 x 4.6mm ProntoSIL C18AQ 5um 250 x ProntoSIL C18AQ 5um 250 x 3.0mm ProntoSIL C18AQ 5um 250 x 2.0mm 12P4F184PS030 15P4F184PS030 20P4F184PS030 ProntoSIL C18AQ PEEK column 3um 125 x ProntoSIL C18AQ PEEK column 3um 150 x ProntoSIL C18AQ PEEK column 3um 200 x 3046F184PS F184PS F184PS F184PS050 ProntoSIL C18AQ 5um 300 x 4.6mm ProntoSIL C18AQ 5um 300 x ProntoSIL C18AQ 5um 300 x 3.0mm ProntoSIL C18AQ 5um 300 x 2.0mm 60

60 10P4F184PS050 12P4F184PS050 15P4F184PS050 ProntoSIL C18AQ PEEK column 5um 100 x ProntoSIL C18AQ PEEK column 5um 125 x ProntoSIL C18AQ PEEK column 5um 150 x 0104F183PS F183PS F183PS F183PS F183PS050 ProntoSIL C18AQ plus Guard 5um 14 x ProntoSIL C18AQ plus 5um 100 x 4.6mm ProntoSIL C18AQ plus 5um 100 x ProntoSIL C18AQ plus 5um 100 x 3.0mm ProntoSIL C18AQ plus 5um 100 x 2.0mm 20P4F184PS050 25P4F184PS050 ProntoSIL C18AQ PEEK column 5um 200 x ProntoSIL C18AQ PEEK column 5um 250 x 1246F183PS F183PS F183PS050 ProntoSIL C18AQ plus 5um 125 x 4.6mm ProntoSIL C18AQ plus 5um 125 x ProntoSIL C18AQ plus 5um 125 x 3.0mm 30P4F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS F184PS100 ProntoSIL C18AQ PEEK column 5um 300 x ProntoSIL C18AQ Guard 10um 14 x 4.6mm ProntoSIL C18AQ Guard 10um 14 x ProntoSIL C18AQ 10um 100 x 4.6mm ProntoSIL C18AQ 10um 100 x ProntoSIL C18AQ 10um 100 x 3.0mm ProntoSIL C18AQ 10um 100 x 2.0mm ProntoSIL C18AQ 10um 125 x 4.6mm ProntoSIL C18AQ 10um 125 x ProntoSIL C18AQ 10um 125 x 3.0mm ProntoSIL C18AQ 10um 125 x 2.0mm ProntoSIL C18AQ 10um 150 x 4.6mm ProntoSIL C18AQ 10um 150 x ProntoSIL C18AQ 10um 150 x 3.0mm ProntoSIL C18AQ 10um 150 x 2.0mm ProntoSIL C18AQ 10um 200 x 4.6mm ProntoSIL C18AQ 10um 200 x ProntoSIL C18AQ 10um 200 x 3.0mm ProntoSIL C18AQ 10um 200 x 2.0mm ProntoSIL C18AQ 10um 250 x 4.6mm ProntoSIL C18AQ 10um 250 x 1202F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS F183PS050 10P4F183PS050 12P4F183PS050 15P4F183PS050 ProntoSIL C18AQ plus 5um 125 x 2.0mm ProntoSIL C18AQ plus 5um 150 x 4.6mm ProntoSIL C18AQ plus 5um 150 x ProntoSIL C18AQ plus 5um 150 x 3.0mm ProntoSIL C18AQ plus 5um 150 x 2.0mm ProntoSIL C18AQ plus 5um 200 x 4.6mm ProntoSIL C18AQ plus 5um 200 x ProntoSIL C18AQ plus 5um 200 x 3.0mm ProntoSIL C18AQ plus 5um 200 x 2.0mm ProntoSIL C18AQ plus 5um 250 x 4.6mm ProntoSIL C18AQ plus 5um 250 x ProntoSIL C18AQ plus 5um 250 x 3.0mm ProntoSIL C18AQ plus 5um 250 x 2.0mm ProntoSIL C18AQ plus 5um 300 x 4.6mm ProntoSIL C18AQ plus 5um 300 x ProntoSIL C18AQ plus 5um 300 x 3.0mm ProntoSIL C18AQ plus 5um 300 x 2.0mm ProntoSIL C18AQ plus PEEK column 5um 100 x ProntoSIL C18AQ plus PEEK column 5um 125 x ProntoSIL C18AQ plus PEEK column 5um 150 x ProntoSIL C18 AQ Columns 2503F184PS F184PS F184PS F184PS F184PS100 ProntoSIL C18AQ 10um 250 x 3.0mm ProntoSIL C18AQ 10um 250 x 2.0mm ProntoSIL C18AQ 10um 300 x 4.6mm ProntoSIL C18AQ 10um 300 x ProntoSIL C18AQ 10um 300 x 3.0mm 20P4F183PS050 25P4F183PS050 30P4F183PS050 ProntoSIL C18AQ plus PEEK column 5um 200 x ProntoSIL C18AQ plus PEEK column 5um 250 x ProntoSIL C18AQ plus PEEK column 5um 300 x 3002F184PS100 ProntoSIL C18AQ 10um 300 x 2.0mm 0146H184PS030 ProntoSIL C18AQ Guard 3um 14 x 4.6mm 10P4F184PS100 12P4F184PS100 15P4F184PS100 ProntoSIL C18AQ PEEK column 10um 100 x ProntoSIL C18AQ PEEK column 10um 125 x ProntoSIL C18AQ PEEK column 10um 150 x 0104H184PS H184PS H184PS H184PS H184PS030 ProntoSIL C18AQ Guard 3um 14 x ProntoSIL C18AQ 3um 100 x 4.6mm ProntoSIL C18AQ 3um 100 x ProntoSIL C18AQ 3um 100 x 3.0mm ProntoSIL C18AQ 3um 100 x 2.0mm 20P4F184PS100 25P4F184PS100 ProntoSIL C18AQ PEEK column 10um 200 x ProntoSIL C18AQ PEEK column 10um 250 x 1246H184PS H184PS H184PS030 ProntoSIL C18AQ 3um 125 x 4.6mm ProntoSIL C18AQ 3um 125 x ProntoSIL C18AQ 3um 125 x 3.0mm 30P4F184PS F183PS050 ProntoSIL C18AQ PEEK column 10um 300 x ProntoSIL C18AQ plus Guard 5um 14 x 4.6mm 1202H184PS H184PS H184PS030 ProntoSIL C18AQ 3um 125 x 2.0mm ProntoSIL C18AQ 3um 150 x 4.6mm ProntoSIL C18AQ 3um 150 x 61

61 1503H184PS H184PS H184PS H184PS H184PS H184PS H184PS030 ProntoSIL C18AQ 3um 150 x 3.0mm ProntoSIL C18AQ 3um 150 x 2.0mm ProntoSIL C18AQ 3um 200 x 4.6mm ProntoSIL C18AQ 3um 200 x ProntoSIL C18AQ 3um 200 x 3.0mm ProntoSIL C18AQ 3um 200 x 2.0mm ProntoSIL C18AQ 3um 250 x 4.6mm 15P4H184PS050 20P4H184PS050 25P4H184PS050 30P4H184PS050 ProntoSIL C18AQ PEEK column 5um 150 x ProntoSIL C18AQ PEEK column 5um 200 x ProntoSIL C18AQ PEEK column 5um 250 x ProntoSIL C18AQ PEEK column 5um 300 x 2504H184PS030 ProntoSIL C18AQ 3um 250 x 2503H184PS030 ProntoSIL C18AQ 3um 250 x 3.0mm 2502H184PS030 ProntoSIL C18AQ 3um 250 x 2.0mm 10P4H184PS030 ProntoSIL C18AQ PEEK column 3um 100 x 12P4H184PS030 ProntoSIL C18AQ PEEK column 3um 125 x 15P4H184PS030 ProntoSIL C18AQ PEEK column 3um 150 x 20P4H184PS030 ProntoSIL C18AQ PEEK column 3um 200 x 25P4H184PS030 ProntoSIL C18AQ PEEK column 3um 250 x ProntoSIL C18 AQ Columns 0146H184PS H184PS H184PS H184PS H184PS H184PS H184PS H184PS H184PS H184PS H184PS050 ProntoSIL C18AQ Guard 5um 14 x 4.6mm ProntoSIL C18AQ Guard 5um 14 x ProntoSIL C18AQ 5um 100 x 4.6mm ProntoSIL C18AQ 5um 100 x ProntoSIL C18AQ 5um 100 x 3.0mm ProntoSIL C18AQ 5um 100 x 2.0mm ProntoSIL C18AQ 5um 125 x 4.6mm ProntoSIL C18AQ 5um 125 x ProntoSIL C18AQ 5um 125 x 3.0mm ProntoSIL C18AQ 5um 125 x 2.0mm ProntoSIL C18AQ 5um 150 x 4.6mm 1504H184PS050 ProntoSIL C18AQ 5um 150 x 1503H184PS050 ProntoSIL C18AQ 5um 150 x 3.0mm 1502H184PS050 ProntoSIL C18AQ 5um 150 x 2.0mm 2046H184PS050 ProntoSIL C18AQ 5um 200 x 4.6mm 2004H184PS050 ProntoSIL C18AQ 5um 200 x 2003H184PS050 ProntoSIL C18AQ 5um 200 x 3.0mm 2002H184PS050 ProntoSIL C18AQ 5um 200 x 2.0mm 2546H184PS050 ProntoSIL C18AQ 5um 250 x 4.6mm 2504H184PS050 ProntoSIL C18AQ 5um 250 x 2503H184PS050 ProntoSIL C18AQ 5um 250 x 3.0mm 2502H184PS050 ProntoSIL C18AQ 5um 250 x 2.0mm 3046H184PS050 ProntoSIL C18AQ 5um 300 x 4.6mm 3004H184PS050 ProntoSIL C18AQ 5um 300 x 3003H184PS050 ProntoSIL C18AQ 5um 300 x 3.0mm 3002H184PS050 ProntoSIL C18AQ 5um 300 x 2.0mm 10P4H184PS050 ProntoSIL C18AQ PEEK column 5um 100 x 12P4H184PS050 ProntoSIL C18AQ PEEK column 5um 125 x 62

62 ProntoSIL Enviro C18 Columns(5um, 6um, 7um) 1204E440EV E440EV E440EV E440EV E440EV E440EV E430EV E430EV E430EV E420EV E420EV E420EV E420EV E420EV E420EV E460EV E460EV E460EV E460EV E460EV E460EV C450PS050 Enviro-PHE C18 7um 125 x Enviro-PHE C18 7um 125 x 3.1mm Enviro-PHE C18 7um 125 x 2.1mm Enviro-PHE C18 7um 250 x Enviro-PHE C18 7um 250 x 3.1mm Enviro-PHE C18 7um 250 x 2.1mm Enviro-PES C18 5um 250 x Enviro-PES C18 5um 250 x 3.1mm Enviro-PES C18 5um 250 x 2.1mm Enviro-PAH C18 6um 125 x Enviro-PAH C18 6um 125 x 3.1mm Enviro-PAH C18 6um 125 x 2.1mm Enviro-PAH C18 6um 250 x Enviro-PAH C18 6um 250 x 3.1mm Enviro-PAH C18 6um 250 x 2.1mm Enviro-EXP C18 6um 200 x Enviro-EXP C18 6um 200 x 3.0mm Enviro-EXP C18 6um 200 x 2.0mm Enviro-EXP C18 6um 250 x Enviro-EXP C18 6um 250 x 3.0mm Enviro-EXP C18 6um 250 x 2.0mm Enviro-PTL um 250 x 4.6mm ProntoSIL Enviro C18 Columns 63

63 ProntoSIL Hypersorb ODS Columns(3um, 5um) 1046F180PY030 ProntoSIL Hypersorb ODS 3um 100 x 4.6mm 2503F180PY050 ProntoSIL Hypersorb ODS 5um 250 x 3.0mm 1004F180PY030 ProntoSIL Hypersorb ODS 3um 100 x 2502F180PY050 ProntoSIL Hypersorb ODS 5um 250 x 2.0mm 1003F180PY030 ProntoSIL Hypersorb ODS 3um 100 x 3.0mm 3046F180PY050 ProntoSIL Hypersorb ODS 5um 300 x 4.6mm 1002F180PY030 ProntoSIL Hypersorb ODS 3um 100 x 2.0mm 3004F180PY050 ProntoSIL Hypersorb ODS 5um 300 x 1246F180PY030 ProntoSIL Hypersorb ODS 3um 125 x 4.6mm 3003F180PY050 ProntoSIL Hypersorb ODS 5um 300 x 3.0mm 1204F180PY030 ProntoSIL Hypersorb ODS 3um 125 x 3002F180PY050 ProntoSIL Hypersorb ODS 5um 300 x 2.0mm 1203F180PY030 ProntoSIL Hypersorb ODS 3um 125 x 3.0mm 1202F180PY030 ProntoSIL Hypersorb ODS 3um 125 x 2.0mm 1546F180PY030 ProntoSIL Hypersorb ODS 3um 150 x 4.6mm 1504F180PY030 ProntoSIL Hypersorb ODS 3um 150 x ProntoSIL Hypersorb ODS 1503F180PY F180PY F180PY F180PY F180PY F180PY F180PY F180PY F180PY F180PY F180PY050 ProntoSIL Hypersorb ODS 3um 150 x 3.0mm ProntoSIL Hypersorb ODS 3um 150 x 2.0mm ProntoSIL Hypersorb ODS 3um 200 x 4.6mm ProntoSIL Hypersorb ODS 3um 200 x ProntoSIL Hypersorb ODS 3um 200 x 3.0mm ProntoSIL Hypersorb ODS 3um 200 x 2.0mm ProntoSIL Hypersorb ODS 3um 250 x 4.6mm ProntoSIL Hypersorb ODS 3um 250 x ProntoSIL Hypersorb ODS 3um 250 x 3.0mm ProntoSIL Hypersorb ODS 3um 250 x 2.0mm ProntoSIL Hypersorb ODS 5um 100 x 4.6mm 1004F180PY050 ProntoSIL Hypersorb ODS 5um 100 x 1003F180PY050 ProntoSIL Hypersorb ODS 5um 100 x 3.0mm 1002F180PY050 ProntoSIL Hypersorb ODS 5um 100 x 2.0mm 1246F180PY050 ProntoSIL Hypersorb ODS 5um 125 x 4.6mm 1204F180PY050 ProntoSIL Hypersorb ODS 5um 125 x 1203F180PY050 ProntoSIL Hypersorb ODS 5um 125 x 3.0mm 1202F180PY050 ProntoSIL Hypersorb ODS 5um 125 x 2.0mm 1546F180PY050 ProntoSIL Hypersorb ODS 5um 150 x 4.6mm 1504F180PY050 ProntoSIL Hypersorb ODS 5um 150 x 1503F180PY050 ProntoSIL Hypersorb ODS 5um 150 x 3.0mm 1502F180PY050 ProntoSIL Hypersorb ODS 5um 150 x 2.0mm 2046F180PY050 ProntoSIL Hypersorb ODS 5um 200 x 4.6mm 2004F180PY050 ProntoSIL Hypersorb ODS 5um 200 x 2003F180PY050 ProntoSIL Hypersorb ODS 5um 200 x 3.0mm 2002F180PY050 ProntoSIL Hypersorb ODS 5um 200 x 2.0mm 2546F180PY050 ProntoSIL Hypersorb ODS 5um 250 x 4.6mm 2504F180PY050 ProntoSIL Hypersorb ODS 5um 250 x 64

64 ProntoSIL Spheribond ODS Columns(3um, 5um, 10um) 1046D181SB030 ProntoSIL Spheribond ODS2 3um 100 x 4.6mm 1504D181SB050 ProntoSIL Spheribond ODS2 5um 150 x 1004D181SB030 ProntoSIL Spheribond ODS2 3um 100 x 1503D181SB050 ProntoSIL Spheribond ODS2 5um 150 x 3.0mm 1003D181SB030 ProntoSIL Spheribond ODS2 3um 100 x 3.0mm 1502D181SB050 ProntoSIL Spheribond ODS2 5um 150 x 2.0mm 1002D181SB030 ProntoSIL Spheribond ODS2 3um 100 x 2.0mm 2046D181SB050 ProntoSIL Spheribond ODS2 5um 200 x 4.6mm 1246D181SB030 ProntoSIL Spheribond ODS2 3um 125 x 4.6mm 2004D181SB050 ProntoSIL Spheribond ODS2 5um 200 x 1204D181SB030 ProntoSIL Spheribond ODS2 3um 125 x 2003D181SB050 ProntoSIL Spheribond ODS2 5um 200 x 3.0mm 1203D181SB030 ProntoSIL Spheribond ODS2 3um 125 x 3.0mm 2002D181SB050 ProntoSIL Spheribond ODS2 5um 200 x 2.0mm 1202D181SB030 ProntoSIL Spheribond ODS2 3um 125 x 2.0mm 2546D181SB050 ProntoSIL Spheribond ODS2 5um 250 x 4.6mm 1546D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB030 10P4D181SB030 12P4D181SB030 15P4D181SB030 20P4D181SB030 25P4D181SB030 30P4D181SB030 ProntoSIL Spheribond ODS2 3um 150 x 4.6mm ProntoSIL Spheribond ODS2 3um 150 x ProntoSIL Spheribond ODS2 3um 150 x 3.0mm ProntoSIL Spheribond ODS2 3um 150 x 2.0mm ProntoSIL Spheribond ODS2 3um 200 x 4.6mm ProntoSIL Spheribond ODS2 3um 200 x ProntoSIL Spheribond ODS2 3um 200 x 3.0mm ProntoSIL Spheribond ODS2 3um 200 x 2.0mm ProntoSIL Spheribond ODS2 3um 250 x 4.6mm ProntoSIL Spheribond ODS2 3um 250 x ProntoSIL Spheribond ODS2 3um 250 x 3.0mm ProntoSIL Spheribond ODS2 3um 250 x 2.0mm ProntoSIL Spheribond ODS2 PEEK Columns 3um 100 x ProntoSIL Spheribond ODS2 PEEK Columns 3um 125 x ProntoSIL Spheribond ODS2 PEEK Columns 3um 150 x ProntoSIL Spheribond ODS2 PEEK Columns 3um 200 x ProntoSIL Spheribond ODS2 PEEK Columns 3um 250 x ProntoSIL Spheribond ODS2 PEEK Columns 3um 300 x 2504D181SB D181SB D181SB D181SB D181SB D181SB D181SB050 10P4D181SB050 12P4D181SB050 15P4D181SB050 20P4D181SB050 25P4D181SB050 30P4D181SB D181SB D181SB D181SB D181SB D181SB100 ProntoSIL Spheribond ODS2 5um 250 x ProntoSIL Spheribond ODS2 5um 250 x 3.0mm ProntoSIL Spheribond ODS2 5um 250 x 2.0mm ProntoSIL Spheribond ODS2 5um 300 x 4.6mm ProntoSIL Spheribond ODS2 5um 300 x ProntoSIL Spheribond ODS2 5um 300 x 3.0mm ProntoSIL Spheribond ODS2 5um 300 x 2.0mm ProntoSIL Spheribond ODS2 PEEK Columns 5um 100 x ProntoSIL Spheribond ODS2 PEEK Columns 5um 125 x ProntoSIL Spheribond ODS2 PEEK Columns 5um 150 x ProntoSIL Spheribond ODS2 PEEK Columns 5um 200 x ProntoSIL Spheribond ODS2 PEEK Columns 5um 250 x ProntoSIL Spheribond ODS2 PEEK Columns 5um 300 x ProntoSIL Spheribond ODS2 10um 100 x 4.6mm ProntoSIL Spheribond ODS2 10um 100 x ProntoSIL Spheribond ODS2 10um 100 x 3.0mm ProntoSIL Spheribond ODS2 10um 100 x 2.0mm ProntoSIL Spheribond ODS2 10um 125 x 4.6mm ProntoSIL Spheribond ODS Columns 1046D181SB050 ProntoSIL Spheribond ODS2 5um 100 x 4.6mm 1204D181SB100 ProntoSIL Spheribond ODS2 10um 125 x 1004D181SB050 ProntoSIL Spheribond ODS2 5um 100 x 1203D181SB100 ProntoSIL Spheribond ODS2 10um 125 x 3.0mm 1003D181SB050 ProntoSIL Spheribond ODS2 5um 100 x 3.0mm 1202D181SB100 ProntoSIL Spheribond ODS2 10um 125 x 2.0mm 1002D181SB050 ProntoSIL Spheribond ODS2 5um 100 x 2.0mm 1546D181SB100 ProntoSIL Spheribond ODS2 10um 150 x 4.6mm 1246D181SB050 ProntoSIL Spheribond ODS2 5um 125 x 4.6mm 1504D181SB100 ProntoSIL Spheribond ODS2 10um 150 x 1204D181SB050 ProntoSIL Spheribond ODS2 5um 125 x 1503D181SB100 ProntoSIL Spheribond ODS2 10um 150 x 3.0mm 1203D181SB050 ProntoSIL Spheribond ODS2 5um 125 x 3.0mm 1502D181SB100 ProntoSIL Spheribond ODS2 10um 150 x 2.0mm 1202D181SB050 ProntoSIL Spheribond ODS2 5um 125 x 2.0mm 2046D181SB100 ProntoSIL Spheribond ODS2 10um 200 x 4.6mm 1546D181SB050 ProntoSIL Spheribond ODS2 5um 150 x 4.6mm 2004D181SB100 ProntoSIL Spheribond ODS2 10um 200 x 65

65 2003D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB D181SB100 10P4D181SB100 12P4D181SB100 15P4D181SB100 20P4D181SB100 25P4D181SB100 30P4D181SB100 ProntoSIL Spheribond ODS2 10um 200 x 3.0mm ProntoSIL Spheribond ODS2 10um 200 x 2.0mm ProntoSIL Spheribond ODS2 10um 250 x 4.6mm ProntoSIL Spheribond ODS2 10um 250 x ProntoSIL Spheribond ODS2 10um 250 x 3.0mm ProntoSIL Spheribond ODS2 10um 250 x 2.0mm ProntoSIL Spheribond ODS2 10um 300 x 4.6mm ProntoSIL Spheribond ODS2 10um 300 x ProntoSIL Spheribond ODS2 10um 300 x 3.0mm ProntoSIL Spheribond ODS2 10um 300 x 2.0mm ProntoSIL Spheribond ODS2 PEEK Columns 10um 100 x ProntoSIL Spheri bond ODS2 PEEK Columns 10um 125 x ProntoSIL Spheribond ODS2 PEEK Columns 10um 150 x ProntoSIL Spheribond ODS2 PEEK Columns 10um 200 x ProntoSIL Spheribond ODS2 PEEK Columns 10um 250 x ProntoSIL Spheribond ODS2 PEEK Columns 10um 300 x, 5/pk (Cartridge holder required) ProntoSIL Eurobond C18 Columns(5um) 1204F181PS F181PS050 ProntoSIL Eurobond C18 5um 125 x ProntoSIL Eurobond C18 5um 250 x 66

66 ProntoSIL C30 Columns(3um, 5um, 10um) 1046F300PS030 ProntoSIL C30 3um 100 x 4.6mm 2503K301PS030 ProntoSIL C30 EC 3um 250 x 3.0mm 1546F300PS030 ProntoSIL C30 3um 150 x 4.6mm 2504K301PS030 ProntoSIL C30 EC 3um 250 x 2546F300PS030 ProntoSIL C30 3um 250 x 4.6mm 1046K301PS050 ProntoSIL C30 EC 5um 100 x 4.6mm 2502F300PS030 ProntoSIL C30 3um 250 x 2.0mm 1546K301PS050 ProntoSIL C30 EC 5um 150 x 4.6mm 2503F300PS030 ProntoSIL C30 3um 250 x 3.0mm 2546K301PS050 ProntoSIL C30 EC 5um 250 x 4.6mm 2504F300PS030 ProntoSIL C30 3um 250 x 2502K301PS050 ProntoSIL C30 EC 5um 250 x 2.0mm 1046H300PS030 ProntoSIL C30 3um 100 x 4.6mm 2503K301PS050 ProntoSIL C30 EC 5um 250 x 3.0mm 1546H300PS030 ProntoSIL C30 3um 150 x 4.6mm 2504K301PS050 ProntoSIL C30 EC 5um 250 x 2546H300PS030 ProntoSIL C30 3um 250 x 4.6mm 2502H300PS030 ProntoSIL C30 3um 250 x 2.0mm 2503H300PS030 ProntoSIL C30 3um 250 x 3.0mm 2504H300PS030 ProntoSIL C30 3um 250 x 1046H300PS H300PS H300PS H300PS H300PS H300PS H300PS H300PS H300PS100 ProntoSIL C30 5um 100 x 4.6mm ProntoSIL C30 5um 150 x 4.6mm ProntoSIL C30 5um 250 x 4.6mm ProntoSIL C30 5um 250 x 2.0mm ProntoSIL C30 5um 250 x 3.0mm ProntoSIL C30 5um 250 x ProntoSIL C30 10um 100 x 4.6mm ProntoSIL C30 10um 150 x 4.6mm ProntoSIL C30 10um 250 x 4.6mm ProntoSIL C30 Columns 2502H300PS100 ProntoSIL C30 10um 250 x 2.0mm 2503H300PS100 ProntoSIL C30 10um 250 x 3.0mm 2504H300PS100 ProntoSIL C30 10um 250 x 1046K300PS030 ProntoSIL C30 3um 100 x 4.6mm 1546K300PS030 ProntoSIL C30 3um 150 x 4.6mm 2546K300PS030 ProntoSIL C30 3um 250 x 4.6mm 2502K300PS030 ProntoSIL C30 3um 250 x 2.0mm 2503K300PS030 ProntoSIL C30 3um 250 x 3.0mm 2504K300PS030 ProntoSIL C30 3um 250 x 1046K300PS050 ProntoSIL C30 5um 100 x 4.6mm 1546K300PS050 ProntoSIL C30 5um 150 x 4.6mm 2546K300PS050 ProntoSIL C30 5um 250 x 4.6mm 2502K300PS050 ProntoSIL C30 5um 250 x 2.0mm 2503K300PS050 ProntoSIL C30 5um 250 x 3.0mm 2504K300PS050 ProntoSIL C30 5um 250 x 1046K301PS030 ProntoSIL C30 EC 3um 100 x 4.6mm 1546K301PS030 ProntoSIL C30 EC 3um 150 x 4.6mm 2546K301PS030 ProntoSIL C30 EC 3um 250 x 4.6mm 2502K301PS030 ProntoSIL C30 EC 3um 250 x 2.0mm 67

67 ProntoSIL AMINO Columns(3um, 5um, 10um) 0146F190PS030 ProntoSIL AMINO Guard 3um 14 x 4.6mm 1202F190PS050 ProntoSIL AMINO 5um 125 x 2.0mm 0104F190PS030 ProntoSIL AMINO Guard 3um 14 x 1546F190PS050 ProntoSIL AMINO 5um 150 x 4.6mm 1046F190PS030 ProntoSIL AMINO 3um 100 x 4.6mm 1504F190PS050 ProntoSIL AMINO 5um 150 x 1004F190PS030 ProntoSIL AMINO 3um 100 x 4.6mm 1503F190PS050 ProntoSIL AMINO 5um 150 x 3.0mm 1003F190PS030 ProntoSIL AMINO 3um 100 x 3.0mm 1502F190PS050 ProntoSIL AMINO 5um 150 x 2.0mm 1002F190PS030 ProntoSIL AMINO 3um 100 x 2.0mm 2046F190PS050 ProntoSIL AMINO 5um 200 x 4.6mm 1246F190PS030 ProntoSIL AMINO 3um 125 x 4.6mm 2004F190PS050 ProntoSIL AMINO 5um 200 x 1204F190PS030 ProntoSIL AMINO 3um 125 x 2003F190PS050 ProntoSIL AMINO 5um 200 x 3.0mm 1203F190PS030 ProntoSIL AMINO 3um 125 x 3.0mm 2002F190PS050 ProntoSIL AMINO 5um 200 x 2.0mm 1202F190PS030 ProntoSIL AMINO 3um 125 x 2.0mm 2546F190PS050 ProntoSIL AMINO 5um 250 x 4.6mm 1546F190PS030 ProntoSIL AMINO 3um 150 x 4.6mm 2504F190PS050 ProntoSIL AMINO 5um 250 x ProntoSIL AMINO Columns 1504F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS030 10P4F190PS030 12P4F190PS030 15P4F190PS030 20P4F190PS030 25P4F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS050 ProntoSIL AMINO 3um 150 x ProntoSIL AMINO 3um 150 x 3.0mm ProntoSIL AMINO 3um 150 x 2.0mm ProntoSIL AMINO 3um 200 x 4.6mm ProntoSIL AMINO 3um 200 x ProntoSIL AMINO 3um 200 x 3.0mm ProntoSIL AMINO 3um 200 x 2.0mm ProntoSIL AMINO 3um 250 x 4.6mm ProntoSIL AMINO 3um 250 x ProntoSIL AMINO 3um 250 x 3.0mm ProntoSIL AMINO 3um 250 x 2.0mm ProntoSIL AMINO PEEK column 3um 100 x ProntoSIL AMINO PEEK column 3um 125 x ProntoSIL AMINO PEEK column 3um 150 x ProntoSIL AMINO PEEK column 3um 200 x ProntoSIL AMINO PEEK column 3um 250 x ProntoSIL AMINO Guard 5um 14 x 4.6mm ProntoSIL AMINO Guard 5um 14 x ProntoSIL AMINO 5um 100 x 4.6mm ProntoSIL AMINO 5um 100 x ProntoSIL AMINO 5um 100 x 3.0mm ProntoSIL AMINO 5um 100 x 2.0mm ProntoSIL AMINO 5um 125 x 4.6mm ProntoSIL AMINO 5um 125 x ProntoSIL AMINO 5um 125 x 3.0mm 2503F190PS F190PS F190PS F190PS F190PS F190PS050 10P4F190PS050 12P4F190PS050 15P4F190PS050 20P4F190PS050 25P4F190PS050 30P4F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS100 ProntoSIL AMINO 5um 250 x 3.0mm ProntoSIL AMINO 5um 250 x 2.0mm ProntoSIL AMINO 5um 300 x 4.6mm ProntoSIL AMINO 5um 300 x ProntoSIL AMINO 5um 300 x 3.0mm ProntoSIL AMINO 5um 300 x 2.0mm ProntoSIL AMINO PEEK column 5um 100 x ProntoSIL AMINO PEEK column 5um 125 x ProntoSIL AMINO PEEK column 5um 150 x ProntoSIL AMINO PEEK column 5um 200 x ProntoSIL AMINO PEEK column 5um 250 x ProntoSIL AMINO PEEK column 5um 300 x ProntoSIL AMINO Guard 10um 14 x 4.6mm ProntoSIL AMINO Guard 10um 14 x ProntoSIL AMINO 10um 100 x 4.6mm ProntoSIL AMINO 10um 100 x ProntoSIL AMINO 10um 100 x 3.0mm ProntoSIL AMINO 10um 100 x 2.0mm ProntoSIL AMINO 10um 125 x 4.6mm ProntoSIL AMINO 10um 125 x ProntoSIL AMINO 10um 125 x 3.0mm ProntoSIL AMINO 10um 125 x 2.0mm ProntoSIL AMINO 10um 150 x 4.6mm ProntoSIL AMINO 10um 150 x ProntoSIL AMINO 10um 150 x 3.0mm 68

68 1502F190PS100 ProntoSIL AMINO 10um 150 x 2.0mm 3002F191PS050 ProntoSIL AMINO E 5um 300 x 2.0mm 2046F190PS F190PS F190PS F190PS F190PS F190PS F190PS F190PS100 ProntoSIL AMINO 10um 200 x 4.6mm ProntoSIL AMINO 10um 200 x ProntoSIL AMINO 10um 200 x 3.0mm ProntoSIL AMINO 10um 200 x 2.0mm ProntoSIL AMINO 10um 250 x 4.6mm ProntoSIL AMINO 10um 250 x ProntoSIL AMINO 10um 250 x 3.0mm ProntoSIL AMINO 10um 250 x 2.0mm 10P4F191PS050 12P4F191PS050 15P4F191PS050 20P4F191PS050 25P4F191PS050 ProntoSIL AMINO E PEEK column 5um 100 x ProntoSIL AMINO E PEEK column 5um 125 x ProntoSIL AMINO E PEEK column 5um 150 x ProntoSIL AMINO E PEEK column 5um 200 x ProntoSIL AMINO E PEEK column 5um 250 x 3046F190PS F190PS F190PS F190PS100 10P4F190PS100 ProntoSIL AMINO 10um 300 x 4.6mm ProntoSIL AMINO 10um 300 x ProntoSIL AMINO 10um 300 x 3.0mm ProntoSIL AMINO 10um 300 x 2.0mm ProntoSIL AMINO PEEK column 10um 100 x 30P4F191PS F195PS F195PS F195PS F195PS050 ProntoSIL AMINO E PEEK column 5um 300 x ProntoSIL AMINO H Guard 5um 14 x 4.6mm ProntoSIL AMINO H Guard 5um 14 x ProntoSIL AMINO H 5um 100 x 4.6mm ProntoSIL AMINO H 5um 100 x 12P4F190PS100 15P4F190PS100 20P4F190PS100 25P4F190PS100 30P4F190PS F191PS F191PS F191PS F191PS F191PS F191PS050 ProntoSIL AMINO PEEK column 10um 125 x ProntoSIL AMINO PEEK column 10um 150 x ProntoSIL AMINO PEEK column 10um 200 x ProntoSIL AMINO PEEK column 10um 250 x ProntoSIL AMINO PEEK column 10um 300 x ProntoSIL AMINO E Guard 5um 14 x 4.6mm ProntoSIL AMINO E Guard 5um 14 x ProntoSIL AMINO E 5um 100 x 4.6mm ProntoSIL AMINO E 5um 100 x ProntoSIL AMINO E 5um 100 x 3.0mm ProntoSIL AMINO E 5um 100 x 2.0mm 1003F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS F195PS050 ProntoSIL AMINO H 5um 100 x 3.0mm ProntoSIL AMINO H 5um 100 x 2.0mm ProntoSIL AMINO H 5um 125 x 4.6mm ProntoSIL AMINO H 5um 125 x ProntoSIL AMINO H 5um 125 x 3.0mm ProntoSIL AMINO H 5um 125 x 2.0mm ProntoSIL AMINO H 5um 150 x 4.6mm ProntoSIL AMINO H 5um 150 x ProntoSIL AMINO H 5um 150 x 3.0mm ProntoSIL AMINO H 5um 150 x 2.0mm ProntoSIL AMINO H 5um 200 x 4.6mm ProntoSIL AMINO H 5um 200 x ProntoSIL AMINO H 5um 200 x 3.0mm ProntoSIL AMINO H 5um 200 x 2.0mm ProntoSIL AMINO Columns 1246F191PS050 ProntoSIL AMINO E 5um 125 x 4.6mm 2546F195PS050 ProntoSIL AMINO H 5um 250 x 4.6mm 1204F191PS050 ProntoSIL AMINO E 5um 125 x 2504F195PS050 ProntoSIL AMINO H 5um 250 x 1203F191PS050 ProntoSIL AMINO E 5um 125 x 3.0mm 2503F195PS050 ProntoSIL AMINO H 5um 250 x 3.0mm 1202F191PS050 ProntoSIL AMINO E 5um 125 x 2.0mm 2502F195PS050 ProntoSIL AMINO H 5um 250 x 2.0mm 1546F191PS050 ProntoSIL AMINO E 5um 150 x 4.6mm 3046F195PS050 ProntoSIL AMINO H 5um 300 x 4.6mm 1504F191PS050 ProntoSIL AMINO E 5um 150 x 3004F195PS050 ProntoSIL AMINO H 5um 300 x 1503F191PS050 ProntoSIL AMINO E 5um 150 x 3.0mm 3003F195PS050 ProntoSIL AMINO H 5um 300 x 3.0mm 1502F191PS050 ProntoSIL AMINO E 5um 150 x 2.0mm 3002F195PS050 ProntoSIL AMINO H 5um 300 x 2.0mm 2046F191PS F191PS F191PS F191PS F191PS F191PS F191PS F191PS050 ProntoSIL AMINO E 5um 200 x 4.6mm ProntoSIL AMINO E 5um 200 x ProntoSIL AMINO E 5um 200 x 3.0mm ProntoSIL AMINO E 5um 200 x 2.0mm ProntoSIL AMINO E 5um 250 x 4.6mm ProntoSIL AMINO E 5um 250 x ProntoSIL AMINO E 5um 250 x 3.0mm ProntoSIL AMINO E 5um 250 x 2.0mm 10P4F195PS050 12P4F195PS050 15P4F195PS050 20P4F195PS050 25P4F195PS050 ProntoSIL AMINO H PEEK column 5um 100 x ProntoSIL AMINO H PEEK column 5um 125 x ProntoSIL AMINO H PEEK column 5um 150 x ProntoSIL AMINO H PEEK column 5um 200 x ProntoSIL AMINO H PEEK column 5um 250 x 3046F191PS F191PS050 ProntoSIL AMINO E 5um 300 x 4.6mm ProntoSIL AMINO E 5um 300 x 30P4F195PS050 ProntoSIL AMINO H PEEK column 5um 300 x 3003F191PS050 ProntoSIL AMINO E 5um 300 x 3.0mm 69

69 ProntoSIL Silica Columns(3um, 5um) ProntoSIL Silica Columns 0146C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS030 10P4C000PS030 12P4C000PS030 15P4C000PS030 20P4C000PS030 25P4C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS050 ProntoSIL 60-3-Si Guard 3um 14 x 4.6mm ProntoSIL 60-3-Si Guard 3um 14 x ProntoSIL 60-3-Si 3um 100 x 4.6mm ProntoSIL 60-3-Si 3um 100 x 4.6mm ProntoSIL 60-3-Si 3um 100 x 3.0mm ProntoSIL 60-3-Si 3um 100 x 2.0mm ProntoSIL 60-3-Si 3um 125 x 4.6mm ProntoSIL 60-3-Si 3um 125 x ProntoSIL 60-3-Si 3um 125 x 3.0mm ProntoSIL 60-3-Si 3um 125 x 2.0mm ProntoSIL 60-3-Si 3um 150 x 4.6mm ProntoSIL 60-3-Si 3um 150 x ProntoSIL 60-3-Si 3um 150 x 3.0mm ProntoSIL 60-3-Si 3um 150 x 2.0mm ProntoSIL 60-3-Si 3um 200 x 4.6mm ProntoSIL 60-3-Si 3um 200 x ProntoSIL 60-3-Si 3um 200 x 3.0mm ProntoSIL 60-3-Si 3um 200 x 2.0mm ProntoSIL 60-3-Si 3um 250 x 4.6mm ProntoSIL 60-3-Si 3um 250 x ProntoSIL 60-3-Si 3um 250 x 3.0mm ProntoSIL 60-3-Si 3um 250 x 2.0mm ProntoSIL 60-3-Si PEEK column 3um 100 x ProntoSIL 60-3-Si PEEK column 3um 125 x ProntoSIL 60-3-Si PEEK column 3um 150 x ProntoSIL 60-3-Si PEEK column 3um 200 x ProntoSIL 60-3-Si PEEK column 3um 250 x ProntoSIL 60-5-Si Guard 5um 14 x 4.6mm ProntoSIL 60-5-Si Guard 5um 14 x ProntoSIL 60-5-Si 5um 100 x 4.6mm ProntoSIL 60-5-Si 5um 100 x ProntoSIL 60-5-Si 5um 100 x 3.0mm ProntoSIL 60-5-Si 5um 100 x 2.0mm ProntoSIL 60-5-Si 5um 125 x 4.6mm ProntoSIL 60-5-Si 5um 125 x ProntoSIL 60-5-Si 5um 125 x 3.0mm ProntoSIL 60-5-Si 5um 125 x 2.0mm ProntoSIL 60-5-Si 5um 150 x 4.6mm ProntoSIL 60-5-Si 5um 150 x 1503C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS C000PS050 10P4C000PS050 12P4C000PS050 15P4C000PS050 20P4C000PS050 25P4C000PS050 30P4C000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS030 ProntoSIL 60-5-Si 5um 150 x 3.0mm ProntoSIL 60-5-Si 5um 150 x 2.0mm ProntoSIL 60-5-Si 5um 200 x 4.6mm ProntoSIL 60-5-Si 5um 200 x ProntoSIL 60-5-Si 5um 200 x 3.0mm ProntoSIL 60-5-Si 5um 200 x 2.0mm ProntoSIL 60-5-Si 5um 250 x 4.6mm ProntoSIL 60-5-Si 5um 250 x ProntoSIL 60-5-Si 5um 250 x 3.0mm ProntoSIL 60-5-Si 5um 250 x 2.0mm ProntoSIL 60-5-Si 5um 300 x 4.6mm ProntoSIL 60-5-Si 5um 300 x ProntoSIL 60-5-Si 5um 300 x 3.0mm ProntoSIL 60-5-Si 5um 300 x 2.0mm ProntoSIL 60-5-Si PEEK column 5um 100 x ProntoSIL 60-5-Si PEEK column 5um 125 x ProntoSIL 60-5-Si PEEK column 5um 150 x ProntoSIL 60-5-Si PEEK column 5um 200 x ProntoSIL 60-5-Si PEEK column 5um 250 x ProntoSIL 60-5-Si PEEK column 5um 300 x ProntoSIL Si Guard 3um 14 x 4.6mm ProntoSIL Si Guard 3um 14 x ProntoSIL Si 3um 100 x 4.6mm ProntoSIL Si 3um 100 x 4.6mm ProntoSIL Si 3um 100 x 3.0mm ProntoSIL Si 3um 100 x 2.0mm ProntoSIL Si 3um 125 x 4.6mm ProntoSIL Si 3um 125 x ProntoSIL Si 3um 125 x 3.0mm ProntoSIL Si 3um 125 x 2.0mm ProntoSIL Si 3um 150 x 4.6mm ProntoSIL Si 3um 150 x ProntoSIL Si 3um 150 x 3.0mm ProntoSIL Si 3um 150 x 2.0mm ProntoSIL Si 3um 200 x 4.6mm ProntoSIL Si 3um 200 x ProntoSIL Si 3um 200 x 3.0mm ProntoSIL Si 3um 200 x 2.0mm ProntoSIL Si 3um 250 x 4.6mm ProntoSIL Si 3um 250 x 70

70 2503F000PS030 ProntoSIL Si 3um 250 x 3.0mm 1203H000PS030 ProntoSIL Si 3um 125 x 3.0mm 2502F000PS030 ProntoSIL Si 3um 250 x 2.0mm 1202H000PS030 ProntoSIL Si 3um 125 x 2.0mm 10P4F000PS030 ProntoSIL Si PEEK column 3um 100 x 1546H000PS030 ProntoSIL Si 3um 150 x 4.6mm 12P4F000PS030 ProntoSIL Si PEEK column 3um 125 x 1504H000PS030 ProntoSIL Si 3um 150 x 15P4F000PS030 ProntoSIL Si PEEK column 3um 150 x 1503H000PS030 ProntoSIL Si 3um 150 x 3.0mm 20P4F000PS030 ProntoSIL Si PEEK column 3um 200 x 1502H000PS030 ProntoSIL Si 3um 150 x 2.0mm 25P4F000PS030 ProntoSIL Si PEEK column 3um 250 x 2046H000PS030 ProntoSIL Si 3um 200 x 4.6mm 0146F000PS050 ProntoSIL Si Guard 5um 14 x 4.6mm 2004H000PS030 ProntoSIL Si 3um 200 x 0104F000PS050 ProntoSIL Si Guard 5um 14 x 2003H000PS030 ProntoSIL Si 3um 200 x 3.0mm 1046F000PS050 ProntoSIL Si 5um 100 x 4.6mm 2002H000PS030 ProntoSIL Si 3um 200 x 2.0mm 1004F000PS050 ProntoSIL Si 5um 100 x 2546H000PS030 ProntoSIL Si 3um 250 x 4.6mm 1003F000PS050 ProntoSIL Si 5um 100 x 3.0mm 2504H000PS030 ProntoSIL Si 3um 250 x 1002F000PS050 ProntoSIL Si 5um 100 x 2.0mm 2503H000PS030 ProntoSIL Si 3um 250 x 3.0mm 1246F000PS050 ProntoSIL Si 5um 125 x 4.6mm 2502H000PS030 ProntoSIL Si 3um 250 x 2.0mm 1204F000PS050 ProntoSIL Si 5um 125 x 10P4H000PS030 ProntoSIL Si PEEK column 3um 100 x 1203F000PS050 ProntoSIL Si 5um 125 x 3.0mm 12P4H000PS030 ProntoSIL Si PEEK column 3um 125 x 1202F000PS050 ProntoSIL Si 5um 125 x 2.0mm 15P4H000PS030 ProntoSIL Si PEEK column 3um 150 x 1546F000PS050 ProntoSIL Si 5um 150 x 4.6mm 20P4H000PS030 ProntoSIL Si PEEK column 3um 200 x 1504F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS F000PS050 ProntoSIL Si 5um 150 x ProntoSIL Si 5um 150 x 3.0mm ProntoSIL Si 5um 150 x 2.0mm ProntoSIL Si 5um 200 x 4.6mm ProntoSIL Si 5um 200 x ProntoSIL Si 5um 200 x 3.0mm ProntoSIL Si 5um 200 x 2.0mm ProntoSIL Si 5um 250 x 4.6mm ProntoSIL Si 5um 250 x ProntoSIL Si 5um 250 x 3.0mm 25P4H000PS H000PS H000PS H000PS H000PS H000PS H000PS H000PS H000PS H000PS050 ProntoSIL Si PEEK column 3um 250 x ProntoSIL Si Guard 5um 14 x 4.6mm ProntoSIL Si Guard 5um 14 x ProntoSIL Si 5um 100 x 4.6mm ProntoSIL Si 5um 100 x ProntoSIL Si 5um 100 x 3.0mm ProntoSIL Si 5um 100 x 2.0mm ProntoSIL Si 5um 125 x 4.6mm ProntoSIL Si 5um 125 x ProntoSIL Si 5um 125 x 3.0mm ProntoSIL Silica Columns 2502F000PS050 ProntoSIL Si 5um 250 x 2.0mm 1202H000PS050 ProntoSIL Si 5um 125 x 2.0mm 3046F000PS050 ProntoSIL Si 5um 300 x 4.6mm 1546H000PS050 ProntoSIL Si 5um 150 x 4.6mm 3004F000PS050 ProntoSIL Si 5um 300 x 1504H000PS050 ProntoSIL Si 5um 150 x 3003F000PS050 ProntoSIL Si 5um 300 x 3.0mm 1503H000PS050 ProntoSIL Si 5um 150 x 3.0mm 3002F000PS050 ProntoSIL Si 5um 300 x 2.0mm 1502H000PS050 ProntoSIL Si 5um 150 x 2.0mm 10P4F000PS050 ProntoSIL Si PEEK column 5um 100 x 2046H000PS050 ProntoSIL Si 5um 200 x 4.6mm 12P4F000PS050 ProntoSIL Si PEEK column 5um 125 x 2004H000PS050 ProntoSIL Si 5um 200 x 15P4F000PS050 ProntoSIL Si PEEK column 5um 150 x 2003H000PS050 ProntoSIL Si 5um 200 x 3.0mm 20P4F000PS050 ProntoSIL Si PEEK column 5um 200 x 2002H000PS050 ProntoSIL Si 5um 200 x 2.0mm 25P4F000PS050 ProntoSIL Si PEEK column 5um 250 x 2546H000PS050 ProntoSIL Si 5um 250 x 4.6mm 30P4F000PS050 ProntoSIL Si PEEK column 5um 300 x 2504H000PS050 ProntoSIL Si 5um 250 x 0146H000PS030 ProntoSIL Si Guard 3um 14 x 4.6mm 2503H000PS050 ProntoSIL Si 5um 250 x 3.0mm 0104H000PS030 ProntoSIL Si Guard 3um 14 x 2502H000PS050 ProntoSIL Si 5um 250 x 2.0mm 1046H000PS030 ProntoSIL Si 3um 100 x 4.6mm 3046H000PS050 ProntoSIL Si 5um 300 x 4.6mm 1004H000PS030 ProntoSIL Si 3um 100 x 4.6mm 3004H000PS050 ProntoSIL Si 5um 300 x 1003H000PS030 ProntoSIL Si 3um 100 x 3.0mm 3003H000PS050 ProntoSIL Si 5um 300 x 3.0mm 1002H000PS030 ProntoSIL Si 3um 100 x 2.0mm 3002H000PS050 ProntoSIL Si 5um 300 x 2.0mm 1246H000PS030 ProntoSIL Si 3um 125 x 4.6mm 10P4H000PS050 ProntoSIL Si PEEK column 5um 100 x 1204H000PS030 ProntoSIL Si 3um 125 x 12P4H000PS050 ProntoSIL Si PEEK column 5um 125 x 71

71 15P4H000PS050 ProntoSIL Si PEEK column 5um 150 x 2003K000PS050 ProntoSIL Si 5um 200 x 3.0mm 20P4H000PS050 ProntoSIL Si PEEK column 5um 200 x 2002K000PS050 ProntoSIL Si 5um 200 x 2.0mm 25P4H000PS050 ProntoSIL Si PEEK column 5um 250 x 2546K000PS050 ProntoSIL Si 5um 250 x 4.6mm 30P4H000PS050 ProntoSIL Si PEEK column 5um 300 x 2504K000PS050 ProntoSIL Si 5um 250 x 0146K000PS030 ProntoSIL Si Guard 3um 14 x 4.6mm 2503K000PS050 ProntoSIL Si 5um 250 x 3.0mm 0104K000PS030 ProntoSIL Si Guard 3um 14 x 2502K000PS050 ProntoSIL Si 5um 250 x 2.0mm 1046K000PS030 ProntoSIL Si 3um 100 x 4.6mm 3046K000PS050 ProntoSIL Si 5um 300 x 4.6mm 1004K000PS030 ProntoSIL Si 3um 100 x 4.6mm 3004K000PS050 ProntoSIL Si 5um 300 x 1003K000PS030 ProntoSIL Si 3um 100 x 3.0mm 3003K000PS050 ProntoSIL Si 5um 300 x 3.0mm 1002K000PS030 ProntoSIL Si 3um 100 x 2.0mm 3002K000PS050 ProntoSIL Si 5um 300 x 2.0mm 1246K000PS030 ProntoSIL Si 3um 125 x 4.6mm 10P4K000PS050 ProntoSIL Si PEEK column 5um 100 x 1204K000PS030 ProntoSIL Si 3um 125 x 12P4K000PS050 ProntoSIL Si PEEK column 5um 125 x 1203K000PS030 ProntoSIL Si 3um 125 x 3.0mm 15P4K000PS050 ProntoSIL Si PEEK column 5um 150 x 1202K000PS030 ProntoSIL Si 3um 125 x 2.0mm 20P4K000PS050 ProntoSIL Si PEEK column 5um 200 x 1546K000PS030 ProntoSIL Si 3um 150 x 4.6mm 25P4K000PS050 ProntoSIL Si PEEK column 5um 250 x 1504K000PS030 ProntoSIL Si 3um 150 x 30P4K000PS050 ProntoSIL Si PEEK column 5um 300 x 1503K000PS030 ProntoSIL Si 3um 150 x 3.0mm 1502K000PS030 ProntoSIL Si 3um 150 x 2.0mm ProntoSIL Silica Columns 2046K000PS K000PS K000PS K000PS K000PS K000PS K000PS K000PS030 10P4K000PS030 12P4K000PS030 ProntoSIL Si 3um 200 x 4.6mm ProntoSIL Si 3um 200 x ProntoSIL Si 3um 200 x 3.0mm ProntoSIL Si 3um 200 x 2.0mm ProntoSIL Si 3um 250 x 4.6mm ProntoSIL Si 3um 250 x ProntoSIL Si 3um 250 x 3.0mm ProntoSIL Si 3um 250 x 2.0mm ProntoSIL Si PEEK column 3um 100 x ProntoSIL Si PEEK column 3um 125 x 15P4K000PS030 ProntoSIL Si PEEK column 3um 150 x 20P4K000PS030 ProntoSIL Si PEEK column 3um 200 x 25P4K000PS030 ProntoSIL Si PEEK column 3um 250 x 0146K000PS050 ProntoSIL Si Guard 5um 14 x 4.6mm 0104K000PS050 ProntoSIL Si Guard 5um 14 x 1046K000PS050 ProntoSIL Si 5um 100 x 4.6mm 1004K000PS050 ProntoSIL Si 5um 100 x 1003K000PS050 ProntoSIL Si 5um 100 x 3.0mm 1002K000PS050 ProntoSIL Si 5um 100 x 2.0mm 1246K000PS050 ProntoSIL Si 5um 125 x 4.6mm 1204K000PS050 ProntoSIL Si 5um 125 x 1203K000PS050 ProntoSIL Si 5um 125 x 3.0mm 1202K000PS050 ProntoSIL Si 5um 125 x 2.0mm 1546K000PS050 ProntoSIL Si 5um 150 x 4.6mm 1504K000PS050 ProntoSIL Si 5um 150 x 1503K000PS050 ProntoSIL Si 5um 150 x 3.0mm 1502K000PS050 ProntoSIL Si 5um 150 x 2.0mm 2046K000PS050 ProntoSIL Si 5um 200 x 4.6mm 2004K000PS050 ProntoSIL Si 5um 200 x 72

72 ProntoSIL Phenyl Columns(3um, 5um, 10um) 0146F050PS030 ProntoSIL Phenyl Guard 3um 14 x 4.6mm 1202C050PS050 ProntoSIL 60-5-Phenyl 5um 125 x 2.0mm 0104F050PS030 ProntoSIL Phenyl Guard 3um 14 x 1546C050PS050 ProntoSIL 60-5-Phenyl 5um 150 x 4.6mm 1046F050PS030 ProntoSIL Phenyl 3um 100 x 4.6mm 1504C050PS050 ProntoSIL 60-5-Phenyl 5um 150 x 1004F050PS030 ProntoSIL Phenyl 3um 100 x 1503C050PS050 ProntoSIL 60-5-Phenyl 5um 150 x 3.0mm 1003F050PS030 ProntoSIL Phenyl 3um 100 x 3.0mm 1502C050PS050 ProntoSIL 60-5-Phenyl 5um 150 x 2.0mm 1002F050PS030 ProntoSIL Phenyl 3um 100 x 2.0mm 2046C050PS050 ProntoSIL 60-5-Phenyl 5um 200 x 4.6mm 1246F050PS030 ProntoSIL Phenyl 3um 125 x 4.6mm 2004C050PS050 ProntoSIL 60-5-Phenyl 5um 200 x 1204F050PS030 ProntoSIL Phenyl 3um 125 x 2003C050PS050 ProntoSIL 60-5-Phenyl 5um 200 x 3.0mm 1203F050PS030 ProntoSIL Phenyl 3um 125 x 3.0mm 2002C050PS050 ProntoSIL 60-5-Phenyl 5um 200 x 2.0mm 1202F050PS030 ProntoSIL Phenyl 3um 125 x 2.0mm 2546C050PS050 ProntoSIL 60-5-Phenyl 5um 250 x 4.6mm 1546F050PS030 ProntoSIL Phenyl 3um 150 x 4.6mm 2504C050PS050 ProntoSIL 60-5-Phenyl 5um 250 x 1504F050PS030 ProntoSIL Phenyl 3um 150 x 2503C050PS050 ProntoSIL 60-5-Phenyl 5um 250 x 3.0mm 1503F050PS030 ProntoSIL Phenyl 3um 150 x 3.0mm 2502C050PS050 ProntoSIL 60-5-Phenyl 5um 250 x 2.0mm 1502F050PS030 ProntoSIL Phenyl 3um 150 x 2.0mm 3046C050PS050 ProntoSIL 60-5-Phenyl 5um 300 x 4.6mm 2046F050PS030 ProntoSIL Phenyl 3um 200 x 4.6mm 3004C050PS050 ProntoSIL 60-5-Phenyl 5um 300 x 2004F050PS030 ProntoSIL Phenyl 3um 200 x 3003C050PS050 ProntoSIL 60-5-Phenyl 5um 300 x 3.0mm 2003F050PS030 ProntoSIL Phenyl 3um 200 x 3.0mm 3002C050PS050 ProntoSIL 60-5-Phenyl 5um 300 x 2.0mm 2002F050PS F050PS F050PS F050PS F050PS030 10P4F050PS030 12P4F050PS030 15P4F050PS030 20P4F050PS030 25P4F050PS C050PS C050PS C050PS C050PS C050PS C050PS C050PS C050PS C050PS050 ProntoSIL Phenyl 3um 200 x 2.0mm ProntoSIL Phenyl 3um 250 x 4.6mm ProntoSIL Phenyl 3um 250 x ProntoSIL Phenyl 3um 250 x 3.0mm ProntoSIL Phenyl 3um 250 x 2.0mm ProntoSIL Phenyl PEEK column 3um 100 x ProntoSIL Phenyl PEEK column 3um 125 x ProntoSIL Phenyl PEEK column 3um 150 x ProntoSIL Phenyl PEEK column 3um 200 x ProntoSIL Phenyl PEEK column 3um 250 x ProntoSIL 60-5-Phenyl Guard 5um 14 x 4.6mm ProntoSIL 60-5-Phenyl Guard 5um 14 x ProntoSIL 60-5-Phenyl 5um 100 x 4.6mm ProntoSIL 60-5-Phenyl 5um 100 x ProntoSIL 60-5-Phenyl 5um 100 x 3.0mm ProntoSIL 60-5-Phenyl 5um 100 x 2.0mm ProntoSIL 60-5-Phenyl 5um 125 x 4.6mm ProntoSIL 60-5-Phenyl 5um 125 x ProntoSIL 60-5-Phenyl 5um 125 x 3.0mm 10P4C050PS050 12P4C050PS050 15P4C050PS050 20P4C050PS050 25P4C050PS050 30P4C050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS050 ProntoSIL 60-5-Phenyl PEEK column 5um 100 x ProntoSIL 60-5-Phenyl PEEK column 5um 125 x ProntoSIL 60-5-Phenyl PEEK column 5um 150 x ProntoSIL 60-5-Phenyl PEEK column 5um 200 x ProntoSIL 60-5-Phenyl PEEK column 5um 250 x ProntoSIL 60-5-Phenyl PEEK column 5um 300 x ProntoSIL Phenyl Guard 5um 14 x 4.6mm ProntoSIL Phenyl Guard 5um 14 x ProntoSIL Phenyl 5um 100 x 4.6mm ProntoSIL Phenyl 5um 100 x ProntoSIL Phenyl 5um 100 x 3.0mm ProntoSIL Phenyl 5um 100 x 2.0mm ProntoSIL Phenyl 5um 125 x 4.6mm ProntoSIL Phenyl 5um 125 x ProntoSIL Phenyl 5um 125 x 3.0mm ProntoSIL Phenyl 5um 125 x 2.0mm ProntoSIL Phenyl 5um 150 x 4.6mm ProntoSIL Phenyl 5um 150 x ProntoSIL Phenyl 5um 150 x 3.0mm 73

73 ProntoSIL Phenyl Columns 1502F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS050 10P4F050PS050 12P4F050PS050 15P4F050PS050 20P4F050PS050 25P4F050PS050 30P4F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS F050PS ProntoSIL Phenyl 5um 150 x 2.0mm ProntoSIL Phenyl 5um 200 x 4.6mm ProntoSIL Phenyl 5um 200 x ProntoSIL Phenyl 5um 200 x 3.0mm ProntoSIL Phenyl 5um 200 x 2.0mm ProntoSIL Phenyl 5um 250 x 4.6mm ProntoSIL Phenyl 5um 250 x ProntoSIL Phenyl 5um 250 x 3.0mm ProntoSIL Phenyl 5um 250 x 2.0mm ProntoSIL Phenyl 5um 300 x 4.6mm ProntoSIL Phenyl 5um 300 x ProntoSIL Phenyl 5um 300 x 3.0mm ProntoSIL Phenyl 5um 300 x 2.0mm ProntoSIL Phenyl PEEK column 5um 100 x ProntoSIL Phenyl PEEK column 5um 125 x ProntoSIL Phenyl PEEK column 5um 150 x ProntoSIL Phenyl PEEK column 5um 200 x ProntoSIL Phenyl PEEK column 5um 250 x ProntoSIL Phenyl PEEK column 5um 300 x ProntoSIL Phenyl Guard 10um 14 x 4.6mm ProntoSIL Phenyl Guard 10um 14 x ProntoSIL Phenyl 10um 100 x 4.6mm ProntoSIL Phenyl 10um 100 x ProntoSIL Phenyl 10um 100 x 3.0mm ProntoSIL Phenyl 10um 100 x 2.0mm ProntoSIL Phenyl 10um 125 x 4.6mm ProntoSIL Phenyl 10um 125 x ProntoSIL Phenyl 10um 125 x 3.0mm ProntoSIL Phenyl 10um 125 x 2.0mm ProntoSIL Phenyl 10um 150 x 4.6mm ProntoSIL Phenyl 10um 150 x ProntoSIL Phenyl 10um 150 x 3.0mm ProntoSIL Phenyl 10um 150 x 2.0mm ProntoSIL Phenyl 10um 200 x 4.6mm ProntoSIL Phenyl 10um 200 x ProntoSIL Phenyl 10um 200 x 3.0mm ProntoSIL Phenyl 10um 200 x 2.0mm ProntoSIL Phenyl 10um 250 x 4.6mm ProntoSIL Phenyl 10um 250 x ProntoSIL Phenyl 10um 250 x 3.0mm ProntoSIL Phenyl 10um 250 x 2.0mm ProntoSIL Phenyl 10um 300 x 4.6mm ProntoSIL Phenyl 10um 300 x ProntoSIL Phenyl 10um 300 x 3.0mm 3002F050PS100 10P4F050PS100 12P4F050PS100 15P4F050PS100 20P4F050PS100 25P4F050PS100 30P4F050PS F440PS030 ProntoSIL Phenyl 10um 300 x 2.0mm ProntoSIL Phenyl PEEK column 10um 100 x ProntoSIL Phenyl PEEK column 10um 125 x ProntoSIL Phenyl PEEK column 10um 150 x ProntoSIL Phenyl PEEK column 10um 200 x ProntoSIL Phenyl PEEK column 10um 250 x ProntoSIL Phenyl PEEK column 10um 300 x ProntoSIL Enviro-PHE 3um 125 x 4.6mm

74 ProntoSIL CN Columns(3um, 5um, 10um) 0146F200PS030 ProntoSIL CN Guard 3um 14 x 4.6mm 1202F200PS050 ProntoSIL CN 5um 125 x 2.0mm 0104F200PS030 ProntoSIL CN Guard 3um 14 x 1546F200PS050 ProntoSIL CN 5um 150 x 4.6mm 1046F200PS030 ProntoSIL CN 3um 100 x 4.6mm 1504F200PS050 ProntoSIL CN 5um 150 x 1004F200PS030 ProntoSIL CN 3um 100 x 4.6mm 1503F200PS050 ProntoSIL CN 5um 150 x 3.0mm 1003F200PS030 ProntoSIL CN 3um 100 x 3.0mm 1502F200PS050 ProntoSIL CN 5um 150 x 2.0mm 1002F200PS030 ProntoSIL CN 3um 100 x 2.0mm 2046F200PS050 ProntoSIL CN 5um 200 x 4.6mm 1246F200PS030 ProntoSIL CN 3um 125 x 4.6mm 2004F200PS050 ProntoSIL CN 5um 200 x 1204F200PS030 ProntoSIL CN 3um 125 x 2003F200PS050 ProntoSIL CN 5um 200 x 3.0mm 1203F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS030 10P4F200PS030 12P4F200PS030 15P4F200PS030 20P4F200PS030 25P4F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS050 ProntoSIL CN 3um 125 x 3.0mm ProntoSIL CN 3um 125 x 2.0mm ProntoSIL CN 3um 150 x 4.6mm ProntoSIL CN 3um 150 x ProntoSIL CN 3um 150 x 3.0mm ProntoSIL CN 3um 150 x 2.0mm ProntoSIL CN 3um 200 x 4.6mm ProntoSIL CN 3um 200 x ProntoSIL CN 3um 200 x 3.0mm ProntoSIL CN 3um 200 x 2.0mm ProntoSIL CN 3um 250 x 4.6mm ProntoSIL CN 3um 250 x ProntoSIL CN 3um 250 x 3.0mm ProntoSIL CN 3um 250 x 2.0mm ProntoSIL CN PEEK column 3um 100 x ProntoSIL CN PEEK column 3um 125 x ProntoSIL CN PEEK column 3um 150 x ProntoSIL CN PEEK column 3um 200 x ProntoSIL CN PEEK column 3um 250 x ProntoSIL CN Guard 5um 14 x 4.6mm ProntoSIL CN Guard 5um 14 x ProntoSIL CN 5um 100 x 4.6mm ProntoSIL CN 5um 100 x ProntoSIL CN 5um 100 x 3.0mm ProntoSIL CN 5um 100 x 2.0mm ProntoSIL CN 5um 125 x 4.6mm ProntoSIL CN 5um 125 x ProntoSIL CN 5um 125 x 3.0mm 2002F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS050 10P4F200PS050 12P4F200PS050 15P4F200PS050 20P4F200PS050 25P4F200PS050 30P4F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS100 ProntoSIL CN 5um 200 x 2.0mm ProntoSIL CN 5um 250 x 4.6mm ProntoSIL CN 5um 250 x ProntoSIL CN 5um 250 x 3.0mm ProntoSIL CN 5um 250 x 2.0mm ProntoSIL CN 5um 300 x 4.6mm ProntoSIL CN 5um 300 x ProntoSIL CN 5um 300 x 3.0mm ProntoSIL CN 5um 300 x 2.0mm ProntoSIL CN PEEK column 5um 100 x ProntoSIL CN PEEK column 5um 125 x ProntoSIL CN PEEK column 5um 150 x ProntoSIL CN PEEK column 5um 200 x ProntoSIL CN PEEK column 5um 250 x ProntoSIL CN PEEK column 5um 300 x ProntoSIL CN Guard 10um 14 x 4.6mm ProntoSIL CN Guard 10um 14 x ProntoSIL CN 10um 100 x 4.6mm ProntoSIL CN 10um 100 x ProntoSIL CN 10um 100 x 3.0mm ProntoSIL CN 10um 100 x 2.0mm ProntoSIL CN 10um 125 x 4.6mm ProntoSIL CN 10um 125 x ProntoSIL CN 10um 125 x 3.0mm ProntoSIL CN 10um 125 x 2.0mm ProntoSIL CN 10um 150 x 4.6mm ProntoSIL CN 10um 150 x ProntoSIL CN 10um 150 x 3.0mm ProntoSIL CN Columns 75

75 ProntoSIL CN Columns 1502F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS F200PS100 10P4F200PS100 12P4F200PS100 15P4F200PS100 20P4F200PS100 25P4F200PS100 30P4F200PS100 ProntoSIL CN 10um 150 x 2.0mm ProntoSIL CN 10um 200 x 4.6mm ProntoSIL CN 10um 200 x ProntoSIL CN 10um 200 x 3.0mm ProntoSIL CN 10um 200 x 2.0mm ProntoSIL CN 10um 250 x 4.6mm ProntoSIL CN 10um 250 x ProntoSIL CN 10um 250 x 3.0mm ProntoSIL CN 10um 250 x 2.0mm ProntoSIL CN 10um 300 x 4.6mm ProntoSIL CN 10um 300 x ProntoSIL CN 10um 300 x 3.0mm ProntoSIL CN 10um 300 x 2.0mm ProntoSIL CN PEEK column 10um 100 x ProntoSIL CN PEEK column 10um 125 x ProntoSIL CN PEEK column 10um 150 x ProntoSIL CN PEEK column 10um 200 x ProntoSIL CN PEEK column 10um 250 x ProntoSIL CN PEEK column 10um 300 x Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 76

76 ProntoSIL DIOL Columns(3um, 5um, 10um) 0146F410PS030 ProntoSIL DIOL Guard 3um 14 x 4.6mm 1202F410PS050 ProntoSIL DIOL 5um 125 x 2.0mm 0104F410PS030 ProntoSIL DIOL Guard 3um 14 x 1546F410PS050 ProntoSIL DIOL 5um 150 x 4.6mm 1046F410PS030 ProntoSIL DIOL 3um 100 x 4.6mm 1504F410PS050 ProntoSIL DIOL 5um 150 x 1004F410PS030 ProntoSIL DIOL 3um 100 x 4.6mm 1503F410PS050 ProntoSIL DIOL 5um 150 x 3.0mm 1003F410PS030 ProntoSIL DIOL 3um 100 x 3.0mm 1502F410PS050 ProntoSIL DIOL 5um 150 x 2.0mm 1002F410PS030 ProntoSIL DIOL 3um 100 x 2.0mm 2046F410PS050 ProntoSIL DIOL 5um 200 x 4.6mm 1246F410PS030 ProntoSIL DIOL 3um 125 x 4.6mm 2004F410PS050 ProntoSIL DIOL 5um 200 x 1204F410PS030 ProntoSIL DIOL 3um 125 x 2003F410PS050 ProntoSIL DIOL 5um 200 x 3.0mm 1203F410PS030 ProntoSIL DIOL 3um 125 x 3.0mm 2002F410PS050 ProntoSIL DIOL 5um 200 x 2.0mm 1202F410PS030 ProntoSIL DIOL 3um 125 x 2.0mm 2546F410PS050 ProntoSIL DIOL 5um 250 x 4.6mm 1546F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS030 10P4F410PS030 12P4F410PS030 15P4F410PS030 20P4F410PS030 25P4F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS050 ProntoSIL DIOL 3um 150 x 4.6mm ProntoSIL DIOL 3um 150 x ProntoSIL DIOL 3um 150 x 3.0mm ProntoSIL DIOL 3um 150 x 2.0mm ProntoSIL DIOL 3um 200 x 4.6mm ProntoSIL DIOL 3um 200 x ProntoSIL DIOL 3um 200 x 3.0mm ProntoSIL DIOL 3um 200 x 2.0mm ProntoSIL DIOL 3um 250 x 4.6mm ProntoSIL DIOL 3um 250 x ProntoSIL DIOL 3um 250 x 3.0mm ProntoSIL DIOL 3um 250 x 2.0mm ProntoSIL DIOL PEEK column 3um 100 x ProntoSIL DIOL PEEK column 3um 125 x ProntoSIL DIOL PEEK column 3um 150 x ProntoSIL DIOL PEEK column 3um 200 x ProntoSIL DIOL PEEK column 3um 250 x ProntoSIL DIOL Guard 5um 14 x 4.6mm ProntoSIL DIOL Guard 5um 14 x ProntoSIL DIOL 5um 100 x 4.6mm ProntoSIL DIOL 5um 100 x ProntoSIL DIOL 5um 100 x 3.0mm ProntoSIL DIOL 5um 100 x 2.0mm ProntoSIL DIOL 5um 125 x 4.6mm ProntoSIL DIOL 5um 125 x ProntoSIL DIOL 5um 125 x 3.0mm 2504F410PS F410PS F410PS F410PS F410PS F410PS F410PS050 10P4F410PS050 12P4F410PS050 15P4F410PS050 20P4F410PS050 25P4F410PS050 30P4F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS100 ProntoSIL DIOL 5um 250 x ProntoSIL DIOL 5um 250 x 3.0mm ProntoSIL DIOL 5um 250 x 2.0mm ProntoSIL DIOL 5um 300 x 4.6mm ProntoSIL DIOL 5um 300 x ProntoSIL DIOL 5um 300 x 3.0mm ProntoSIL DIOL 5um 300 x 2.0mm ProntoSIL DIOL PEEK column 5um 100 x ProntoSIL DIOL PEEK column 5um 125 x ProntoSIL DIOL PEEK column 5um 150 x ProntoSIL DIOL PEEK column 5um 200 x ProntoSIL DIOL PEEK column 5um 250 x ProntoSIL DIOL PEEK column 5um 300 x ProntoSIL DIOL Guard 10um 14 x 4.6mm ProntoSIL DIOL Guard 10um 14 x ProntoSIL DIOL 10um 100 x 4.6mm ProntoSIL DIOL 10um 100 x ProntoSIL DIOL 10um 100 x 3.0mm ProntoSIL DIOL 10um 100 x 2.0mm ProntoSIL DIOL 10um 125 x 4.6mm ProntoSIL DIOL 10um 125 x ProntoSIL DIOL 10um 125 x 3.0mm ProntoSIL DIOL 10um 125 x 2.0mm ProntoSIL DIOL 10um 150 x 4.6mm ProntoSIL DIOL 10um 150 x ProntoSIL DIOL Columns 77

77 ProntoSIL DIOL Columns 1503F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS F410PS100 10P4F410PS100 12P4F410PS100 15P4F410PS100 20P4F410PS100 25P4F410PS100 30P4F410PS100 ProntoSIL DIOL 10um 150 x 3.0mm ProntoSIL DIOL 10um 150 x 2.0mm ProntoSIL DIOL 10um 200 x 4.6mm ProntoSIL DIOL 10um 200 x ProntoSIL DIOL 10um 200 x 3.0mm ProntoSIL DIOL 10um 200 x 2.0mm ProntoSIL DIOL 10um 250 x 4.6mm ProntoSIL DIOL 10um 250 x ProntoSIL DIOL 10um 250 x 3.0mm ProntoSIL DIOL 10um 250 x 2.0mm ProntoSIL DIOL 10um 300 x 4.6mm ProntoSIL DIOL 10um 300 x ProntoSIL DIOL 10um 300 x 3.0mm ProntoSIL DIOL 10um 300 x 2.0mm ProntoSIL DIOL PEEK column 10um 100 x ProntoSIL DIOL PEEK column 10um 125 x ProntoSIL DIOL PEEK column 10um 150 x ProntoSIL DIOL PEEK column 10um 200 x ProntoSIL DIOL PEEK column 10um 250 x ProntoSIL DIOL PEEK column 10um 300 x Visit for details on complete HPLC systems, HPLC columns FUTECS CO., LTD. 406, Jangyoungsilkwan, Sinil-dong, Daedeok-gu, Daejeon, ROK Telephone: /3 Telefax: futecs@futecs.com Internet: 78

78 ProntoSIL HPLC Columns To Order Call ~1 For Technical Assistance: Call Fax To Order and For More Information: Call Fax Web Site: 79