Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (%

Size: px

Start display at page:

Download "Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (%"

하나 저
6 years ago
Views:

http://wwwtechnonetcokr (Aluminum & Aluminum BasedAlloy) : LG 1 Aluminum Table 1, 2 1000 7000 4 Al 990% Al

1 (Aluminum & Aluminum BasedAlloy) : LG 1 Aluminum Table 1, Al 990% Al 1XXX AlCu 2XXX AlMn 3XXX AlSi 4XXX AlMg 5XXX AlMgSi 6XXX AlZn(Mg, Cu) 7XXX 8XXX ( ) 9XXX Fig 1 Table 1 Aluminum 1

2 Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (%) Si Fe Cu Mn Mg Zn Cr Ti Al Pb : 06 Bi : 06 Remainder Zr + Ti : Remainder Zr + Ti : Remainder V : Zr : Remainder 010 Remainder Remainder Remainder Ni : Remainder 2

3 (%) Si Fe Cu Mn Mg Zn Cr Ti Al Remainder N N Remainder Remainder 015 Remainder Remainder Remainder Remainder Remainder Remainder Zr : Remainder Remainder Zr + Ti : 025 Remainder Zr : 025 V : 010 Remainder Aluminum Association 11 Aluminum,,,, ph Fe, Cu, Pb ppm (Mn, Si, Mg, Cu, Zn, Cr ) 4, 2 3

4 111 (1) Al Al, Mn, Si, Mg H (2), Al Cu, 45 (3), Al 2, 15 (4) Al, Al K Arc Al Al Al (Si), (Fe), (Mn), (Mg) Table 1 2 1XXX, 3XXX, 4XXX, 5XXX 4

5 Table 3 Table 3 Nominal Composition (%) Cu Mn Mg Cr % Min Aluminum,,, % Min Aluminum, % Min Aluminum,, Tank % Min Aluminum % Min Aluminum,,,,, % Min Aluminum,, 1100, ,, 1100,,, , Can Body, Deep Draw Base,, Color Al 3003,,,, ,, Tank, 5083, Can End,,,,, 5

6 Nominal Composition (%) Cu Mn Mg Cr , ,, 5154,,, , , , 5N01 04,,,, X Table 4 Annealed, 0 recrystallized F As fabricated H1 Strain hardened only H2 Strain hardened and then partial annealed H3 Strain hardened and then stabilized, Table 5 Yield Tensile Elongation / Strength (Kgf/mm 2 ) Strength (Kgf/mm 2 ) thickness (16mm %) 1070 O H H Brinell Hardness (Kgf/mm 2 ) (Kgf/mm 2 ) 1050 O H14 H16 H O

7 7 / Yield Strength (Kgf/mm 2 ) Tensile Strength (Kgf/mm 2 ) Elongation thickness (16mm %) Brinell Hardness (Kgf/mm 2 ) (Kgf/mm 2 ) H12 H14 H16 H O H14 H16 H O H12 H14 H16 H O H32 H34 H36 H O H12 H14 H16 H18 H32 H34 H36 H O H32 H34 H36 H O H18 H O H O H32 H34 H O T4, T451 T6, T

8 122 (Cu), (Mn), (Zn), (Si) 2XXX, 6XXX 7XXX 4XXX Table 6 Nominal Composition (%) Cu Si Mn Mg Zn Ni Cr , ,, ,,, , ,,, ,,, , ,,, , ,, ,,,, ,, , , Brazing 8

9 , , , , Al, mm, , 7075 X 0 Annealed F As fabricated Table 7 W Solution heat treated T1 T2 T3 T4 T5 T6 Cooled from an elevatedtemperature shaping process and naturally aged to a subsequent stable condition Solution heat treated, cold worked, and naturally aged to a substantially stable condition Solution treated and naturally aged to a substantially stable condition Cooled from an elevatedtemperature shaping process and then artificially aged Solution heat treated and stabilized,, 9

10 Solution heat treated and T7 stabilized T8 T9 T10 Solution heat treated, cold worked, and then artificially aged Solution heat treated, artificially aged, then cold worked Cooled from an elevatedtemperature shaping process, cold worked, and then artificially aged,, Table 8 / Yield Strength (Kgf/mm 2 ) Tensile Strength (Kgf/mm 2 ) Elongation thickness (16mm %) 2014 O T4, T T6, T O T4, T O T3 T351,T4 T O T1 T4 T5 T6 T83 T831 T O T6,T Brinell Hardness (Kgf/mm 2 ) (Kgf/mm 2 )

11 JIS Z 3232 (BY) Wire (WY) ASME Sec II Part C SFA 510 ASME Sec II Part C SFA 510 UNS No ER1100 R1100 A91100 Table 9 (SFA510) (wt%) 11 Others Si Fe Cu Mn Mg Cr Ni Zn Ti Each Total Si + Fe ER1188 B R1188 B A ER2319 C R2319 C A ER4009 R4009 ER4010 R4010 R4011 ER4043 R4043 ER4047 R4047 ER4145 R4145 ER4643 R4643 ER5183 R5183 ER5356 R5356 ER5554 R5554 ER5556 R5556 ER5654 R5654 A94009 A94010 A94011 A94011 A94047 A94515 A A 015 Aluminu m 990% Min A 9988% Min A 015 Rem A 015 Rem A 015 Rem A 015 Rem A 015 Rem A 015 Rem A A A A A95654 Si + Fe 045 R2060 D A A 015 Rem A 015 Rem A 015 Rem A 015 Rem 005 A 015 Rem 005 A 015 Rem 005 A 015 Rem Rem

12 UNS No RC3550 RA3560 R3570 RA3570 E A33550 A13560 A03570 A13570 (wt%) Others Si Fe Cu Mn Mg Cr Ni Zn Ti Each Total Aluminu m Rem Rem Rem Rem Note : A : Beryllium content shall be 00008% maximum B : Vanadium content shall be 005% maximum Gallium content shall be 003% maximum C : Vanadium content shall be % Zirconium content shall be % D : Tin content shall not exceed 005% E : Berylium content shall be % Rem : Remainder 212 1) 2) 3) 4) 5) 6) Anodizing (1),, (Hot short) 79 AlSi (4XXX ), AlMg (5XXX ), 12

13 AlCu (2XXX ), AlMg 2 Si (6XXX ) Silicon Manganese 79 (2) (3) AlMg 3% Mg 66 Mg 13

14 Table 10, wt% Al Si Fe Cu Mn Mg Cr Zn Ti Each Total 1100 Si + Fe < Min Min Remainder Remainder Remainder Remainder Remainder Remainder Remainder Si + Fe < Remainder Remainder Remainder Remainder Remainder Remainder (4) Galvanic, AlMg (5) Si Mg 14

15 AlSi 4043 (6) Anodizing (Si) (Cr) (Si) AlSi, (Cr) (Cu) (Mn) 22 Aluminum 221 Gas Tungsten Arc Welding Al GTAW Cleaning Ar GTAW, Arc, Shielding Gas, 15

16 222 Gas Metal Arc Welding (1) Short Circuit Arc (Metal Transfer) Wire ø0612mm, 20150A 3mm (2) Pulsed Arc MIG Wire (Spray), Drop Globular Arc Arc (Peak) Arc Wire 12, 16 ø, 24 ø (3) Spray Arc GMAW Wire 1024mm ø, A 223,,, Al, Flux,,, 224 (Stud Welding), (Electron Beam Welding), Plasma Arc, Stud Welding 16

17 (1) Al GTAW, MIG Arc, Airplasma, Air plasma, (2),,, Grind Table 11 Sodium NaOH Hydroxide 50 grams with 1 Water (60 71 ) (Caustic Soda Nitric Acid 30, ) HNO 3 (68%) Nitric Acid H 2 SO 4 1 gal (379 ) 2 3, CrO SulfuricChromic 3 45oz (128kg) (60 82 ) Water 9 gal (341 ) Phosphoric Chromic Sulfuric Acid Ferrous Sulfate H 3 PO 4 (75%) 35gal (13,3 ) CrO3 175Ib (794 grams) Water 100gal (379 ) H 2 SO oz (165 grams) Water 026 gal (1 ) Fe 2 SO 4 H 2 10% by Volume 200 (93 ) 165 (73 ) 80 (268 ) , 5 10,, 5 10

18 (3) 1) (Tack Weld) Al (JIG), Table 12 (Tack Weld) (mm) GTAW mm mm MIG mm mm 2) 3, 100mm 232 (1) 1) Al,,,, 18

19 Fig 2), 1000, 3000, 4000, 5000, 5000 AlMg Mg Mg 6000 AlMgSi AlMg AlSi 6000 Mg Si 3),, Butt, Fillet, Arc Bead End TAB Crater 19

http://wwwtechnonetcokr (2) Al,, Al,,,,,, Table

20 (2) Al,, Al,,,,,, Table 10 Fig Table 13 1, 2 ( ) 1,,,,, 2, 3,, 4 Torch 20

21 Touch (233K ) Arc 5 start EndTAB Bead ( start ) 6 ( 8590% ) ( 1m/sec ) Feedback (3) Al, GTAW Wire brush 21

LG Table 1 Ni Table 1 Nominal Chemical Composition of Nickel Alloys Alloy Ni C Mn Fe S Si Cu Cr Al Ti Mo Co W Cb B Zr Nickel

LG Table 1 Ni Table 1 Nominal Chemical Composition of Nickel Alloys Alloy Ni C Mn Fe S Si Cu Cr Al Ti Mo Co W Cb B Zr Nickel LG Nickel 1 Ni Ni Ni, Table 1 UNS NoASTM Brand Name Nickel, Monel, Inconel, Incoloy Alloy Group Nickel 200, Monel 400, Inconel 600 (Solution Hardening), (Precipitation Hardening) Ni Cr, Mo, Cu 11 Nickel,