1.........
2
3..\
4
5
[R] : Enter Raid setup utility 6
Press[A]keytocreateRAID RAID Type: <1> JBOD <2> RAID 0 <3> RAID 1: 2 7
" RAID 0 <1> Auto Create <2> Manual Create: 2 RAID 0 Block Size: <1>16K <2>32K <3>64K <4>128K <5>256K: 3 8
RAID 0 Use to select and press <Enter> to confirm The disk you select first will be the SOURCE disk 9
RAID 0 Split the SOURCE (Disk 1) data to RAID disks? N 10
RAID 0: Disk1 Disk 2 Press [D] key to delete RAID RAID 0: Disk1 Disk 2 [R] : Enter Raid setup utility 11
Disk Status RAID 0: Disk1 Disk 2 [R]:E Do You Want To Save changes? N [Q]:E Pri_Master XXXXXX XXXXXX XXXX XXXXXXX Sec_Master XXXXXX XXXXXX XXXX XXXXXXX 12
[R] : Enter Raid setup utility 13
Press[A]keytocreateRAID RAID Type: <1> JBOD <2> RAID 0 <3> RAID 1: 3 14
RAID 1 <1> Auto Create <2> Manual Create: 2 15
SiS RAID BIOS Setting Utility RAID 1 Use to select and press <Enter> to confirm The disk you select first will be the SOURCE disk 16
RAID 1 Duplicate the SOURCE (Disk 1) data to RAID disks? N 17
RAID 1: Disk1 Disk 2 [R] : Enter Raid setup utility Disk Status RAID 1: Disk1 Disk 2 [R]:E Do You Want To Save changes? N [Q]:E Pri_Master XXXXXX XXXXXX XXXX XXXXXXX Sec_Master XXXXXX XXXXXX XXXX XXXXXXX 18
[R] : Enter Raid setup utility 19
Press [A] key to create RAID Disk Status [B] : Select Boot Disk [R] RAID : Enter Type: Raid <1> JBOD setup <2> utility RAID 0 <3> RAID 1: 1 [Q] : Exit the menu Location Pri_Master Model XXXXXX Capacity Mode RAID Type XXXXXX XXXX XXXXXXX Sec_Master The selected boot disk is marked by "*" 20
JBOD <1> Auto Create <2> Manual Create: 2 Disk Status RAID * Current 0 Created Raid * Block Size: <1>16K <2>32K <3>64K <4>128K <5>256K: 3 [Q] : Exit the menu JBOD Use to select and press <Enter> to confirm The Location disk you select Model first will Capacity be the SOURCE Mode disk RAID Type Pri_Master XXXXXX XXXXXX XXXX XXXXXXX Sec_Master XXXXXX XXXXXX XXXX XXXXXXX 21
Disk RAIDStatus Setup JBOD: Disk1 Disk 2 RAID [R] : 0Enter Raid setup utility DoyouwanttoSplittheSOURCEdiskdatatootherdisks?N [Q] : Exit the current menu menu Location Model Model Capacity Capacity Mode Mode RAID RAID Type Type Disk Pri_Master 1 XXXXXX XXXXXX XXXX XXXXXXXXXXX Disk Sec_Master 2 XXXXXX XXXXXX XXXX XXXXXXXXXX The selected boot disk is marked by "*" Disk Status JBOD: Disk1 Disk 2 [R]:E Do You Want To Save changes? N [Q]:E Pri_Master XXXXXX XXXXXX XXXX XXXXXXX Sec_Master XXXXXX XXXXXX XXXX XXXXXXX 22
Press F6 if you need to install a third party SCSI or RAID driver... 23
Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass atorage devices. <none> To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. Press S=Specify F6 if Additional you needdevice to install ENTER=Continue a third party SCSI F3=Exit or RAID driver... Windows Setup Please insert the disk labeled Manufacturer-supplied hardware support disk into Drive A: Press ENTER when ready. Press ENTER=Continue F6 if you need ESC=Cancel to install a F3=Exit third party SCSI or RAID driver... 24
Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. WinXP SiS Raid / IDE Controller Win2000 SiS Raid / IDE Controller Press ENTER=Continue F6 if you need ESC=Cancel to install a F3=Exit third party SCSI or RAID driver... 25