Non-Contact Infrared Temperature I R - Compact Sensor / Transmitter GASDNA co.,ltd C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX: +82-32-623-7510 E-mail: sales@gasdna.com http://www.gasdna.com
1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard current signal output (4~20mA). It can measure from -60 to maximum 380 in the distance of 8:1 D:S (Distance to Spot) Emissivity is 0.10 ~ 0.99 adjustable. IR-Compact can monitor the temperature in real time in site through its infrared sensor part and signal processing module. Applications Plastics, Fluids, Rubber, Coated components, Asphalt, Wood, Paper, Ceramics, Textiles, Glass, Food etc. 2. Ordering information Code Number IR-compact- - - MODEL Description IR-COMPACT Code A D:S 1 8:1 2 12:1 (Option) Code B Temperature Range 1-60~380 2 0~200 Z Other Code C OutPut N 4~20mA Code D Cable Length 1 1m Cable Z Other (Option) 2
3. Accessories Name Shape Usage Remark Fixing nut Sensor fixing nut Basic accessory Mounting bracket Sensor mounting bracket Basic accessory 4. Specification Segment Specification Measurement Range -60~350-60~380 Device Accuracy Repeatability Thermopile ±1% / full scale ±1% of reading Distance : Spot 8:1 Optical spectrum wave Responsive Time 8~14 μm 0.5 sec or below Emissivity 0.10~0.99 Analog Output Communication Power 4~20mA RS-485 DC 12~24V(Max 100mA) Ambient temperature(no water cooling) 0~70 Temperature Resolution 0.1 Operating Relative Humidity 5~90% Operating Ambient Temperature -30~85 Waterproof IP65,NEMA 4 Housing material Weight Cable length SUS 285g 1m (standard), other(option) 3
5. Dimension 4
6. Optical field of view (D:S 8:1) DISTANCE: SENSOR TO OBJECT (IN) SPOT DIA.* (MM) SPOT DIA.* (IN) 4 0.5 12.5 100 10 1.2 D:S=8:1 31.3 250 20 40 4.9 2.5 62.5 125 500 1000 DISTANCE: SENSOR TO OBJECT (MM) *FOCUS POINT D:S = 8:1 FAR FIELD D:S = 8:1 7. Option 485 To RS232 converter Up and down adjustable Bracket Indicator (Model No. DI-20) 2 Inch Led Display 5
8. Wiring No. Cable color Usage 1 Black Power 24VDC(+) 2 Red Power 0V(-) 3 Yellow ma (Current) Analog output 4 Green TX+ 5 White TX- 9. Communication specification and Software 홈페이지적외선온도계소프트웨어참조 10. Emissivity Table Material Emissivity Black body 0.95 Asphalt 0.90~0.98 Textiles, Fabric 0.98 Concrete 0.94 Ascon 0.95 Skin 0.98 Leather 0.75 Sand 0.90 Soil 0.92~0.96 Paint 0.8~0.95 Water 0.92~0.96 Ice 0.96~0.98 Rubber 0.94 Snow 0.83 Plastic 0.85~0.95 Wood 0.90 Ceramic 0.90~0.94 Glass 0.90~0.94 Marble 0.94 Chromic Oxide 0.78 Iron Oxide 0.78~0.82 Brick 0.93~0.96 Copper oxide 0.78 Mortar 0.89~0.91 6
11. Installation Please make sure the target area is larger than the field of view. Best Good Incorrect SENSOR Target diameter Equal to view field Target diameter Larger than view field Target diameter Less than view field Background - The spot size is decided by the distance from the sensor to the target. - Please refer to the section 5. Optical field of view and make sure your target area is larger than the field of view. Please locate the sensor vertical against the target. α<45 - It is the best for you to install the sensor vertical against the target area or object. If it is not available, the sensor should be more than 45 against the target area. Otherwise, it can affect the measuring accuracy. 7
α<45 Best Detectors, Please avoid the heat reflection from other high temperature materials 고온의다른측정대상물의열반사차단 Furna Refiection from wrong angle Change the angle to avoid refiection Refiection from wrong angle Install shielding panel to avoid refiection Change the angle to avoid refiection Install shieldin 강한빛으로부터차단하여설치 강한빛으로부터차단하여설치 Please avoid highlight. Highlight Highlight Shelter Shelter Electronic Noise를피하여설치고주파가있는곳이나고전압이 있는 Electronic 곳을최대한 Noise피하여를피하여설치한다. 고주파가있는곳이나고전압이있는곳을최대한피하여설치한다. Please avoid electronic noise. Please avoid the high frequency or high voltage area such as motor, pump, power line, and so on. 8