AGC9145WF±¹¿µ_120511a

Transcription

1 User Manual English MP3[WMA] CD Player with USB Host AM/FM Radio with Bluetooth Hands-free

2

3 1

4 2

5 No! No! 3

6 4 [ ] [ ]

7 [Radio function] [CD/MP3/WMA function] ch1 FM ST 89.1 MHz RDM CLAS MP3 D035 F014 USB 00:01 Knocking on he 5 5

8 6

9 MUTE 7

10

11 ~ 2 ST 9

12 1 2 ~

13

14 1 [ ] 2 [ ] 3 [ ]

15 1 13

16 14 1 [ ] [ ]

17 1 [ ] 1 [ ] [ ] 1 1 [] 1 [ ] 15

18 1 [ ] [ ] 1 [ ] 1 2 [ ] 3 4 [ ] [ ], [ ] CD 16

19

20

21 1 VOLUME VOLUME 19

22 VOL SEEK PWR [ ] MODE (CD USB AUX BT Audio RADIO...) (FM1 FM2 AM FM1...) MUTE Phone [ ] 20

23

24

25

26 24 (W x H x D) MP3[WMA] USB section 20 Hz ~ 20 KHz 0.1 % (at 1 KHz) 85 db (at 1 KHz) 60 db (at 1 KHz) 54 db (at 1 KHz) MP3[WMA]/CD section Core Spec. Bluetooth V2.0 (Bluetooth V1,2-60 dbm 16 M bits Flash Memory Higher Bandwidth Audio Advanced Audio Distribution Profile (Bluetooth Hands-free Profile Private Call

27 25

28 26

29 27

30 English Please read these instructions carefully before using this product and save this manual for future use. The illustrations and pictures in this manual may differ with the actual design of the product. The design and specifications of this product may change without prior notification for product improvement.

31 Contents Before using Precautions... 2 Usage Location of controls... 4 Getting started... 7 Radio... 9 MP3[WMA]/CD player Bluetooth USB/AUX player Steering wheel audio control English Contents Appendix Troubleshooting Specifications

32 Precautions Safety information English Before using WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. CAUTION: THIS PRODUCT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. This equipment has been tested and found to comply with the limits for a Class 1 laser product, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio reception, which can be determined by turning the equipment off or on, the user is encouraged to consult the dealer or an experienced radio technician for help. Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device. 2

33 Precautions Safety Information When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Washing Your Car Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool down before switching the unit on. Use the Proper Power Supply This product is designed to operate with a 14 V DC, negative-ground battery system. Disc Mechanism Do not insert coins or other small objects. Keep screwdrivers and other metallic objects away from the disc mechanism and disc. Use Authorized Service Centers This product is made of precision parts. Do not attempt to disassemble or adjust any parts. Please refer to the Service Center list included with this product for service assistance. For Installation This product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30. Note: The preset memory is cleared to return to the original factory setting when the power connector or battery is disconnected. Handling precautions for safety This unit is designed for DC 14V negative-ground vehicles only. Do not use a non-standard power supply. Do not use gasoline, thinner, benzene, organic solvent, etc., to clean the unit. Do not forcibly press function buttons. By pressing lightly, damage can be avoided. No! No! 3 English Before using

34 English Usage 4 Location of controls Front view 1. Display window 2. BAND/AS button Selects the radio function or band (press : FM1 FM2 AM FM1...), to store stations automatically (press and hold) 3. SCAN/INF button Scan in each station automatically, enter the file search mode (press); switch the display items (press and hold). 4. MEDIA button Select the connected external device (USB, AUX or Bluetooth Audio) playback. 5. SET button Enters the setting mode (EQ style, Tone and Bluetooth). 6. TUNE button - During radio reception Find a station manually (press); seek a station automatically (press and hold). - During CD/USB playback Skip a track (press); up/down for file searching, fast-forward/rewind a track (press and hold). 7. CALL [ ]button Receive the incoming a call (press); connect the Bluetooth device (press and hold). 8. END [ ] button End a call (press); release the Bluetooth connection (press and hold). 9. Disc slot Insert a disc (label side up), playback starts CD button Select the CD playback. 11. Disc EJECT [ ]button Ejects the disc. 12. POWER [ ]/MUTE button with VOLUME dial Turn the power on, turn the radio mute or CD/USB pause playback on/off (press), tune the power off (press and hold); adjusts the volume or selects the item for setting/searching (rotate). 13. Number [1 to 6 D+] buttons - During radio reception Receive each stored stations (press); store each station (press and hold). - During CD/USB playback 2 RPT : Repeat playback 3 INT : Intro playback 4 RDM : Random playback 5 D- : Folder down 6 D+ : Folder up

35 Location of controls Display window [Radio function] [CD/MP3/WMA function] ch1 FM Preset channel number 2. Stereo indicator 3. Band indicator 4. Multi-function display area ST 89.1 MHz RDM CLAS MP3 D035 F014 USB 00:01 Knocking on he 6. Disc indicator 7. Media indicator CDP lights up when an audio CD is loaded. MP3 lights up when a MP3 file is loaded. WMA lights up when a WMA file is loaded. 8. Current folder (directory) number 9. Current file (track) number 10. USB indicator 11. Folder select mode indicator 12. Playback mode indicators RPT (Repeat), INT (Intro), RDM (Random) 13. Bluetooth connection indicator 14. Playing time 15. EQ (Equalizer) indicator POP, ROCK, COUNTRY, VOICE, JAZZ, CLASSIC 5 English Usage 5

36 Location of controls Rear view English Usage 1. Antenna jack To plug the radio antenna cable. 2. AUX In port To connect an AUX connector for audio device. 3. USB port To connect a USB connector for USB host function. 4. I/O connector (18 pin) 6

37 Getting started Turn the unit on/off Adjusting volume directly 1 Turn your car s ignition key to ACC or ON position. 2 Press POWER [ ] button to turn the unit on. If the source is ready, playback also starts. If you turn the power off while listening to a disc/ USB, the CD/USB play will start form where playback has been stopped previously. If you turned the power off while listening to the radio, the same radio station will be selected. 3 Press and hold POWER [ ] button to turn the unit off. If you turned the power off while listening to a disc, next time you turn the power on disc play will start from where playback was stopped previously. 1 Rotate VOLUME dial to increase or decrease the volume level. The display will show the volume level (Audio mode : 00 to 45 / Call mode : 06 to 32). Muting the sound quickly 1 Press MUTE button to set mute or pause on. MUTE or PAUSE will flash on the display. During the CD/USB, paused the playback and mute the sound. To restore the sound or resume CD/USB playback, press MUTE button or rotate VOLUME dial. English Usage To turn the power on directly By inserting a disc, connecting the USB device or pressing BAND/AS, CD or MEDIA button (while the disc is inserted or the USB/AUX/BT Audio device is connected), you can also turn the power on and the unit then plays. 7

38 Getting started Selecting the Equalizer style You can select the one of the 6 EQ styles or EQ OFF. 1 Press SET button to enter the Setting mode. EQ, TONE and BT appear on the display. Setting the sound You can adjust the level of the Bass, Middle, Treble, Balance and Fader. 1 Press SET button to enter the Setting mode. EQ, TONE and BT appear on the display. English Usage 8 2 Rotate VOLUME dial to select the EQ menu, then press POWER [ ] button. 3 RotateVOLUME dial to select the desired EQ style, then press POWER [ ] button. By rotating the VOLUME dial, you can select one of the following EQ Styles. EQ OFF POP ROCK COUNTRY VOICE JAZZ CLASSIC... 2 Rotate VOLUME dial to select the TONE menu, then press POWER [ ] button. 3 Rotate VOLUME dial to select the desired Tone Control item, then press POWER [ ] button. By rotating the VOLUME dial, you can select one of the following Tone Control items. BASS MIDDLE TREBLE BALANCE FADER PREVIOUS BASS... 4 Rotate VOLUME dial to adjust the value of the level or balance, then press POWER [ ] button. BASS: adjust the bass sound level (-7 to +7). MIDDLE: adjust the treble sound level (-7 to +7). TREBLE: adjust the treble sound level (-7 to +7). BALANCE: adjust the sound balance between the right and left speakers (LEFT15 to RIGHT15). FADER: adjust the sound fade between the front and rear speakers (FRONT15 to REAR15). PREVIOUS: return to the TONE menu.

39 Radio Tuning in a station Turn on the radio 1 Press BAND/AS button repeatedly to select the band. FM1 FM2 AM FM1... Tuning a station manually 2 Press TUNE buttons repeatedly to tune to a desired frequency. Tuning a station automatically 3 Press TUNE buttons for more 2 seconds, then release. Seeking will start. The tuning automatically stops at the stations whose signals can be received, and the station are received. To quickly scan a station Storing a station manually You can preset 6 stations for each band (FM1, FM2 and AM). 1 Follow steps 1 to 4 in Tuning in a station to tune to the frequency you wish to preset. ~ 2 Press and hold Number [1 to 6 D+] buttons for more 2 seconds to select the preset number. The frequency is stored in the selected preset number and you will hear a beep. To preset another station, repeat these steps. Note If you try to store another station in the same preset number, the previously stored station will be replaced. English Usage Note 4 Press SCAN/INF button to start tuning for a station. The unit will go to a station, play for 5 seconds, and then go to the next station. When the unit tunes in to the desired station, press SCAN/INF button to stop scanning. During reception of stereo stations the ST indicator is on. When tuning in stations while driving, use preset number button to prevent accidents. 9

40 English Usage Notes Radio Storing stations automatically The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. Up to 6 stations can be stored in current band. 1 Press BAND/AS button repeatedly to select the band. FM1 FM2 AM FM Press and hold BAND/AS button for more 2 seconds. AST Scanning appears on the display. The unit stores stations in the order of their frequencies on the number buttons. If only a few stations can be received due to weak signals, some number buttons will retain their former settings. When a number is indicated in the display, the unit starts strong stations from the one currently displayed. Listening to a preset station ~ 1 Press BAND/AS button repeatedly to select the band. FM1 FM2 AM FM Press the Number [1 to 6 D+] button on which the desired station is stored. 10

41 MP3[WMA]/CD player Before disc playback You can play CD-DA and MP3/WMA discs. Note : Available discs CD-DA : CD-R/CD-RW MP3/WMA : CD-R/CD-RW/CD-ROM This unit cannot play the following files; - MP3 files encoded with MP3i and MP3 PRO format. - MP3 files encoded in an inappropriate format. - MP3 files encoded with Layer 1/2. - WMA files encoded with lossless, professional, and voice format. - WMA files which are not based upon Windows Media Audio. - WMA files copy-protected with DRM. - Files which have data such as WAVE, ATRAC3, etc. Caution 3 (8 cm) CD is not available for this unit, so do not insert it. Do not use irregularly-shaped discs. Do not use discs that have a seal or label attached. To avoid damaging the front panel, do not push it down or place objects on it while it is open. Do not put your finger or hand in the front panel. Do not insert foreign objects into the disc slot. Note The power will be turned on automatically when a disc is loaded. A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally. (For example, it may be reproduced without sound.) Loading a disc and starting playback 1 Insert a disc into the disc slot with the label side facing up. Playback will start automatically after recognizing the data of the loading disc. It may take some time to start playing. All tracks will be played until you change the source or eject the disc. Note: Do not insert a disc when the disc indicator lights on the display window because a disc is already loaded. When disc is in the unit Press CD/USB/AUX/BT Audio button repeatedly to select the CD and playback starts. Controlling the playback 1 Press TUNE buttons repeatedly to go to the next or previous tracks. 2 Press and hold TUNE buttons to fastforward or rewind the track, and release to resume the playback. The search function works but search speed is not constant. While fast forwarding or rewinding, you can only hear intermittent sounds. 3 Press 5 D- or 6 D+ button repeatedly to go to the previous or next folders (only for MP3 or WMA disc). 11 English Usage

42 MP3[WMA]/CD player Selecting the playback modes Searching the music English Usage 1 Press 2 RPT button repeatedly to select Repeat playback mode. RPT : The current track plays repeatedly. FOLDER [ ] RPT (for MP3/WMA only) : All tracks of current folder play repeatedly. Off : Cancels repeat playback. 2 Press 3 INT button repeatedly to select Intro scan playback mode. FOLDER [ ] INT (for MP3/WMA only) : Successively plays the intro of the track in the current folder. INT : Successively plays the intro of the track in the disc. Off : Cancels intro playback. 3 Press 4 RDM button repeatedly to select Random playback mode. FOLDER [ ] RDM (for MP3/WMA only) : Tracks of current folder play in random order. RDM : Tracks of disc play in random order. Off : Cancels random playback. Note: Changing the source If you change the source, playback also stops (without ejecting the disc). Next time you select CD as the playback source, disc play starts from where it was been stopped previously. 1 Press SCAN/INF button to enter the track search Mode. 2 Rotate and hold VOLUME dial to select the desired track number or name, then press POWER [ ] button to start playback the selected track. Showing the folder information 1 Press and hold SCAN/INF button to show the current folder information for 5 seconds. To switch the scroll function on/off Activate/deactivate the scroll function for displaying performance. 2 While showing the folder information, press and hold SCAN/INF button to show the SCROLL ON or OFF. 3 Rotate VOLUME dial to switch to OFF or ON, then press POWER [ ] button. 12

43 MP3[WMA]/CD player Stopping playback and ejecting a disc 1 Press EJECT [ ] button, and take the disc. Note: Ejecting a disc If the ejected disc is not removed within 10 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.) About CD-R/CD-RW Use only finalized CD-Rs or CD-RWs. This unit can playback only files of the same type which are first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. This unit can playback multi-session discs; however, unclosed sessions will be skipped while playing. Some CD-Rs or CD-RWs may not playback on this unit because of their disc characteristics, or for the following reasons; - Discs are dirty or scratched. - Moisture condensation occurs on the lens inside the unit. - The pickup lens inside the unit is dirty. - CD-R/CD-RW on which the files are written with Packet Write method. - There are improper recording conditions(missing data, etc) or media conditions (stained, scratched, warped, etc). CD-RWs may require a longer readout time since the reflectance of CD- RWs is lower then that of regular CDs. Do not use the following CD-Rs or CD-RWs; - Discs with stickers, labels, or protective seals stuck to the surface. - Discs in which labels can be directly printed by an ink jet printer. Using these discs under high temperatures or high humidity may cause malfunctions or damage to the unit. About MP3/WMA This unit can playback MP3/WMA files with the extension code<.mp3> or <.wma> (regardless of the letter case-upper/lower). This unit can show the names of albums, artists (performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. This unit can display only one-byte characters, no other characters can be correctly displayed. This unit can playback MP3/WMA files meeting the conditions below; - Bit rate: 8 kbps ~ 320 kbps for MP3 / 64 kbps ~ 161 kbps (VBR) for WMA - Sampling frequency: 48 khz, 44.1 khz, 32 khz (for MPEG-1 Layer 2/3) 24 khz, khz, 16 khz (for MPEG-2 Layer 2/3) 12 khz, khz, 8 khz (for MPEG-2.5 Layer 3) - Disc format: ISO/IEC , ISO/IEC The maximum number of characters for file/folder names vary among the disc format used (includes 4 extension characters - <.mp3> or <.wma>). - ISO 9660 Level 1: up to 12 characters - ISO 9660 Level 2: up to 31characters - Romeo: up to 128 characters - Joliet: up to 64 characters - Windows long file name: up to 128 characters The unit can playback files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. After performing the search function, this difference becomes noticeable. The unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. Note Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. English Usage 13

44 English Usage 14 Bluetooth Bluetooth operation To use the Bluetooth function, the following procedure is necessary. 1. Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called pairing.. This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. (Depending on the device, you may need to input a pass code for each connection.) 2. Connection Sometimes pairing allows automatic connection. To use the device after pairing is made, start the connection. 3. Handsfree talk/music streaming You can call a mobile phone and listen to music when the connection is made. Some Bluetooth device may not support specific functions. Pairing your phone and car audio system Fist, register ( pair ) a Bluetooth device (mobile phone, etc.) and this unit with each other. You can pair up to 6 devices. Once pairing is established, there is no need for pairing again. Place the Bluetooth device within 3 m (9 ft) of this unit. 1 Press and hold CALL [ ]button for more 3 seconds. The unit enters pairing standby mode. The "PAIRING" appears in the display with beep and then flash the "KEY 00xx". 2 Set the Bluetooth device to search for this unit. A list of detected devices appears in the display of the connecting device. This unit is displayed as New Rexton on the connecting device. Confirm this by pressing YES or OK on your phone. - If your phone does not find New Rexton repeat steps 1~2. 3 If *Pass key input is required on the display of a connecting device, input 00xx (4 digit). This unit and Bluetooth device memorize each other s information, and when pairing is made, the unit is ready for connection to the device. "BT CONNECT" and Bluetooth device model name or BT MOBILE with indicator appear after pairing is completed. - Some Bluetooth device ask you to accept the BT link or Connect. Enter Yes or OK. * Pass key may be called passcode, PIN code, PIN number or password, etc., depending on the device. 4 Set the Bluetooth device to connect to this unit. Note : Pairing standby mode is not released until the connection is made. Connecting a mobile phone - Devices are registered once paired and connected with this unit. You can select the registered device and connect it. - If pairing has already been achieved, start operation from here. - Depending on the device, connection may start automatically after pairing. 1 Connect to this unit using your mobile phone and press CALL [ ]button. The BT CONNECT with icon is appeared and Bluetooth signal is switched to on. Note To show the information of connected Bluetooth device, press SCAN/INF button.

45 Bluetooth Making a call via last call You can make a call from the connected mobile phone by operating this unit. 1 Press and hold CALL [ ]button for more 3 seconds to enter the Last call dial mode. REDIAL appears and the phone redialing starts. Adjusting the talk volume 1 Rotate VOLUME dial to increase or to decrease the talk volume level. The display will show the Bluetooth volume level. (BT VOL 6 ~ 32) Receiving a call When receiving a call, the ring tone is output from your car speakers and caller s number appears on screen. 1 When a call comes in, CALL IN and Telephone number appears with a ring tone, press CALL [ ]button to answer a call. BT TEL appears and the phone call starts. The built-in microphone of this audio system will pick up your voice. To reject an incoming call, press END [ ] button. CALL REJECT appears and return to previous function. Muting the talk sound 1 Press MUTE button on the Steering wheel audio control to activate the microphone mute function. The display will show MIC MUTE. To cancel the microphone mute function, press MUTE button on the Steering wheel audio control. MIC MUTE disappears. English Usage Ending a call 1 Press END [ ]button. Note: Even if the calls is ended, the Bluetooth connection is not canceled. 15

46 English Usage Transferring a call In oder to activate/deactivate the appropriate device (this unit/mobile phone), check the following. 1 During a call via Bluetooth handsfree, press CALL [ ]button. The hands-free function is deactivated, and the microphone and speaker of mobile phone are activated. PRIVATE appears and the mobile phone calling starts. Note: Bluetooth During a call via mobile phone, press CALL [ ] button. The Bluetooth hands-free function is activated. BT TEL appears and the hands-free calling starts. For details on mobile phone operation, refer to your mobile phone manual. Depending on the mobile phone, hands-free connection may be cut off when call transfer is attempted. Listening to music from a Bluetooth device You can listen to music of the mobile phone on this unit if the mobile phone supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Switch to Bluetooth signal on of the your mobile phone or audio device. Stereo Headset appears when the connection is made. 2 Rotate VOLUME dial to turn down the volume level on this unit. 3 Press MEDIA button repeatedly until BT AUDIO appears. 4 Operate the audio device to start playback. You can change the volume and skip track by using buttons on this unit. (Refer to MP3[WMA]/CD player section) 5 Rotate VOLUME dial to adjust the volume level on this unit. 6 To stop listening to music, press and hold END [ ]button or press BAND/AS, MEDIA or CD button to select other function. 16

47 Bluetooth Setting the Bluetooth mode You can control the Bluetooth modes. Incase of the PAIR selecting 1 Press SET button to enter the Setting mode. EQ, TONE and BT appear. 2 Rotate VOLUME dial to select the BT menu, then press POWER [ ] button. 3 Rotate VOLUME dial to select the desired Bluetooth Setting item, then press POWER [ ] button. By rotating TUNE dial, you can select one of the following Bluetooth Setting items. PAIR SELECT PRIORITY DELETE BT VOL TEL OPTION PREVIOUS PAIR... 5 Follow steps 2 to 4 in 14 page Pairing your phone and car audio system to complete the pairing. Incase of the DELETE selecting 5 Rotate VOLUME dial to select the YES or NO, then press POWER [ ] button. YES: Deletes the selected Bluetooth device list. NO: Cancels the Delete operation. English Usage 4 RotateVOLUME dial to select device list or adjust value, then press POWER [ ] button. PAIR: enter the pairing (Key Code : 00xx). SELECT: selects one of 5 Bluetooth devices for connection. PRIORITY: selects the priority of connection. DELETE: deletes a Bluetooth device. PREVIOUS: return to the BT menu. 17

48 English Usage 18 USB/AUX player Playing a USB device By connecting a USB device to the USB input port on the unit, you can listen on your car speakers, while controlling the USB device from the unit. 1 Press and hold POWER [ ] button to turn the unit off. 3 When the USB storage device is already connected, press MEDIA button repeatedly until USB appears. The USB playback will starts automatically. You can change the volume, play mode and track selection by using buttons on control panel. (Refer to MP3[WMA]/CD player section) 2 Connect the USB storage device with MP3/WMA files to be played to the USB input terminal. The unit turn power on, then playback starts automatically with USB indication after recognizing the data of the USB storage device. Precautions for handling USB device When using the external USB device, make sure to keep the device disconnected and connect only some time after turning on the vehicle ignition. The USB device may be damaged if the USB device already connected when the ignition is turned on. (USB device is not an electronic automotive component) Some USB devices may not operate properly because of compatibility issues. Check that the external device is supported by the device before starting use. The device will only recognize USB devices formatted in FAT 12/16/32. When formatting the external USB device, the device may not properly recognize a Byte/Sector selection other than 512Byte or 2048Byte. Avoid the contact of bodily parts and foreign substances with the USB connector. Repeatedly connecting/disconnecting the USB in a short period of time may cause damage to the device. When disconnecting the USB, an abnormal sound may occur occasionally. Abruptly disconnecting the external USB device while the USB is operating may cause the device to be damaged or function abnormally. Make sure to disconnect the USB device only after the audio power is turned off or when the audio is operating in a different mode. The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB. Such differences in the required time are not indications of malfunction. Please wait the period of time required to recognize the device. The device supports only USB devices used to play music files. Do not use the USB I/F to charge batteries or USB accessories which generate heat. Such acts may lead to deteriorated performance or damage to the device. The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. In the case of high capacity USB devices, there are instances where the logical drives are partitioned for user convenience. In this case, it will only be possible to play the USB music in the top level drive. When using partitioned drives, save the songs you wish to play on the device only in the top-level logical drive. In addition, certain USB devices are configured with a separate drive used to install application programs and it may not be possible to play songs from such drives for the reasons as described above. The device may not support normal operation when using formats such as HDD Type, CF, or SD Memory. The device will not support files locked by DRM (Digital Rights Management).

49 USB/AUX player Listening to auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. 1 Turn down the volume on the unit. 2 Turn off the external audio equipment. Connect the audio output of the external audio equipment to AUX input terminal on the the unit. Be sure to adjust the volume for each connected audio device before playback. 3 Start playback of the external audio equipment at a moderate volume. 4 Press MEDIA button repeatedly until AUX IN appears. When the external audio equipment is already connected, skip the 1 ~ 3 steps. 5 Set your usual listening volume on the unit. English Usage 19

50 Steering wheel audio control English Usage Using the Steering wheel audio control If your vehicle has this feature, some audio controls can be adjusted at the steering wheel. They include the following: VOL Press : increase/decrease the volume. SEEK During a station listen Press : go to the next/previous preset station. Press and hold : search the next/previous radio station. (The radio seeks stations only with a strong signal that are in the selected band) During a CD/USB/BT Audio play Press : go to the next/previous track. Press and hold : fast forward/backward through the tracks. (only for CD/ USB playback) PWR [ ] Press : turns the system on/off or switch to private call mode for incoming a call. MODE Press : selects the functions (CD USB AUX BT Audio RADIO...) Press and hold : selects the band (FM1 FM2 AM FM1...) MUTE During a call Press : turns the MIC. MUTE function on/off During Radio or CD/USB/BT Audio mode Press : turns the radio mute or CD/ USB pause playback on/off. Phone [ ] During standby Press and hold : makes a call via last call dialing function During a call coming in Press : receives the incoming a call Press and hold : rejects the incoming a call During a call Press : switches to the private or bluetooth call model Press and hold : ends a call 20

51 Troubleshooting Common Symptoms Possible causes Possible remedies - Sound is not generated. - Noise - No sound from speaker(s) Radio - MUTE is set to ON. - There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines. - Balance/fader setting is not appropriate. - Set MUTE to OFF. - Keep electromagnetic-wave generators such as a cellular phones away from the unit and the wiring of the unit. If the noise cannot be eliminated due to the wiring harness of the car, consult your dealer. - Readjust balance/fader. English Symptoms Possible causes Possible remedies - Poor reception or noise - Seeking takes too long. - The number of auto preset stations is less than 6. - Preset stations cannot be stored. - Unsatisfactory broadcast conditions. - The number of receivable stations is less than 6. - The contact of the battery lead is poor, or the battery lead is not always powered. - Digital seeking may take some time. - Receive and listen to the signals from the station concerned in the analog mode. - Move to an area with maximum number of receivable stations, and try presetting. - Make sure that the battery lead is connected securely, and preset stations again. - Change to auto seeking, and proceed with seeking again. Appendix 21

52 Troubleshooting MP3[WMA]/CD player Symptoms Possible causes Possible remedies English Appendix - No playback or disc ejected - The CD-R/RWs that are playable on other devices are not playable on this unit. - Sound skipping or noise - Sound skipping due to vibration - Disc unejectable - The disc is inserted upside down. - There is a flaw or foreign object on the disc. - The disc has unplayable formatted data. - The unit plays back the ROM track of a mix mode CD. - The playability of some CD-R/RWs may depend on the combination of media, recording software and recorder to be used even if these CD-R/RWs are playable on other devices such as a personal computer. - There is a flaw or foreign object on the disc. - The unit is not sufficiently secured. - The unit is tilted at over 30 in the frontto-end direction. - A label is peeled off from the CD in the unit. - Insert the disc correctly. - Remove the foreign objects, or use a flawless disc. - Refer to the description about MP3/WMA for playable sound data except CD-DA (i.e. music CD). - Skip the ROM track. - Make CD-R/RWs in different combination of media, recording software and recorder after referring to the description about MP3/WMA. - Remove the foreign objects, or use a flawless disc. For MP3/WMA, refer to the description about MP3/WMA. - Secure the unit to the console box with the rear support strap, etc. - Make the angle 30 or less. - Refer repair to the dealer where you purchased the unit. 22

53 Troubleshooting USB MP3[WMA] player Symptoms Possible causes Possible remedies - The USB does not work - USB memory is damaged. - USB memory has been contaminated. - A separately purchased USB HUB is being used. - A USB extension cable is being used. - A USB which is not a Metal Cover Type USB Memory is being used. - An HDD type, CF, SD Memory is being used. - There are no music files which can be played. - Please use after formatting the USB into FAT 12/16/32 format. - Remove any foreign substances on the contact surface of the USB memory and multimedia terminal. - Directly connect the USB memory with the multimedia terminal in the vehicle. - Directly connect the USB memory with the multimedia terminal in the vehicle. - Use a standard USB Memory. - Use a standard USB Memory. - Only MP3, WMA file formats are supported. Please use only the supported music file formats. English Appendix 23

54 Specifications General section MP3[WMA]/CD section English Appendix Power supply Speaker impedance Max. Power Weight Dimension(WxHxD) FM/MW/LW Radio section Frequency range Usable sensitivity Signal to noise ratio Stereo separation FM AM FM AM FM AM FM MP3[WMA] USB section Frequency response Total harmonic distortion Dynamic range Signal-to-noise ratio Channel separation DC 14.4V Negative Ground 4 ohm 45 Watts x 4 Ch 880 g (Net) 178 x 52 x 155 mm 87.5 MHz ~ 108 MHz 531 khz ~ 1602 khz 18 dbu 35 dbu 45 db 40 db 20 db 20 Hz ~ 20 KHz 0.1 % (at 1 KHz) 85 db (at 1 KHz) 60 db (at 1 KHz) 54 db (at 1 KHz) Sampling frequency DA converter Pick-up type Light source Wave length Frequency response Signal to noise ratio Total harmonic distortion Wow and flutter Channel separation Bluetooth section Core Spec. Sensitivity Internal Memory Applied function 8 times oversampling 4 DAC system Astigma 3-beam Semiconductor laser 780 nm 20 Hz ~ 20 khz ( 3 db) 50 db 1 % (1 khz) Below measurable limits 35 db Bluetooth V2.0 (Bluetooth V1.2 ) - 60 dbm 16 M bits Flash Memory Higher Bandwidth Audio support Advanced Audio Distribution Profile Hands-free Profile support/private Call 24 Specifications and design are subject to modification without notice due to improvements.

55 English Appendix 23

56