Logitech PTZ Pro Camera Setup Guide
English.......................................... 3 繁體中文.......................................... 8 한국어.......................................... 13 2
Know your product Logitech PTZ Pro Camera 1 4 9 5 10 6 7 11 8 2 13 14 3 12 15 Camera 1. 10X lossless zoom 2. Camera LED 3. Kensington Security Slot Remote 4. Mirror 5. Zoom in 6. Pan and tilt 7. Zoom out 8. Camera presets 1, 2, and 3 9. Video mute 10. Far end control 11. Home 12. Remote battery door Accessories 13. Camera mount 14. Cable lock 15. Cables English 3
Set up your product a b c 1. Set up camera on table, or using mount on table or wall. 2. Connect PTZ Pro camera (refer to diagram above). 3. Attach cable lock before plugging in cable to the camera port. 4. Connect to external power. 5. To start video from your PC or Mac application, connect the USB cable to your USB port. 6. The camera LED will flash to show that connection is taking place, and when completed, the camera head will rotate. 7. If these activities do not take place, try again and then consult Troubleshooting or call technical support. 8. Start your video call from your application. The LED on the camera will alight when streaming. 4 English
Visit Product Central Discover your product s full potential. Get valuable information and usage tips by browsing easy-to-use FAQs. Find answers to product questions and get help setting up your product. See if there s software available for download that can enhance your product experience. To enjoy all the benefits of your Logitech product, visit www.logitech.com/support/ptz and take advantage of Logitech s wide range of useful support services: Troubleshooting Software downloads Diagnostics In-box documentation Firmware upgrades Warranty information Support community Spare parts (if available) English 5
Use your product Video Starting the video: The video is controlled by the application and will start once the camera is selected and the video is started in the application. An LED will light when the video is streaming. Pan and tilt the camera using the controls on the remote control. Press once for incremental or press and hold for continuous pan or tilt. Caution: Do not manually rotate webcam head. Doing so may damage unit. Zoom the camera up to 10X by pressing the zoom button. Home: Select the Home button to return the default, out-of-box home position. Camera Presets: You can set up to 3 Camera Preset positions. First, position the camera using the remote control, and then press and hold one of the Camera Preset buttons for 3 seconds to save that position. You may return to your defined position at any time by pressing the Preset button once. Use Preset 1 as your own defined home position. When the camera is reconnected to the PC, it will return to the position set in Preset 1. If no position is set for Preset 1, the camera will return to the default home position. All three Presets are by default set to the out-of-box home. Far end control: By selecting this key and downloading the application from www.logitech.com/support/ptz, you may control the pan, tilt and zoom of any Logitech ConferenceCam product or C930e Webcam in supported applications. Camera selection and pan, tilt and zoom tools are also available from the downloadable application for PC as well as ability to disable this feature locally. Please visit the download page listed for more information. 6 English
Mounting your camera x2 Logitech PTZ Pro Camera Changing the remote control battery The PTZ Pro remote control runs on a Li-ion CR2032 battery. Battery life will vary based on usage. Troubleshooting tips Please visit www.logitech.com/support/ptz for troubleshooting tips, information on software tools and for a diagnostic tool to help troubleshoot issues you may have with your PTZ Pro. English 7
瞭解您的產品 1 4 9 5 10 6 7 11 8 2 13 14 3 12 15 攝影機 1. 10 倍無損變焦 2. 攝影機 LED 指示燈 3. Kensington 防盜鎖插孔 遙控器 4. 鏡像 5. 放大 6. 平移和傾斜 7. 縮小 8. 攝影機預設設定 1 2 和 3 9. 視訊靜音 10. 遠端控制 11. 歸位 12. 遙控器電池蓋 配件 13. 攝影機底座 14. 纜線鎖 15. 連接線 8 繁體中文
設定您的產品 Logitech PTZ Pro Camera a b c 1. 將攝影機安裝在桌子上, 或使用底座將攝影機安裝在桌子或牆上 2. 連接 PTZ Pro 攝影機 ( 請參照上方的示意圖 ) 3. 先安裝纜線鎖, 然後將連接線插入到攝影機埠 4. 連接外部電源 5. 若要使用 PC 或 Mac 應用程式啟動視訊, 請將 USB 連接線連接到 USB 埠 6. 攝影機 LED 指示燈閃爍, 表示正在進行連線, 連線成功後, 攝影機頭會旋轉 7. 若上述情況並未出現, 請再試一次, 如果依然無效, 請查看疑難排解技巧或致電技術支援 8. 從應用程式啟動視訊通話 串流播放時, 攝影機上的 LED 指示燈會亮起 繁體中文 9
造訪產品中心 全面發掘產品潛力 請瀏覽常見問答集, 瞭解相關寶貴資訊和使用技巧 查詢有關產品問題的答案並獲得關於產品安裝方面的協助說明 查看是否有可供供下載以提升產品體驗的軟體 若要盡享羅技產品的所有優點, 請造訪 www.logitech.com/support/ptz, 充分利用羅技體貼周到的支援服務 : 疑難排解 軟體下載 診斷 包裝盒內文件 韌體升級 保固資訊 支援社群 備用零件 ( 若有供應 ) 10 繁體中文
使用您的產品 視訊 啟動視訊 : 視訊由應用程式控制, 選擇攝影機後視訊即會在應用程式中啟動 視訊串流播放時,LED 指示燈會亮起 使用遙控器上的控制鍵可平移和傾斜攝影機 按一下可進行增量調整, 按住不放可連續進行平移或傾斜調整 注意 : 請勿手動旋轉網路攝影機 否則可能損壞裝置 按下變焦按鈕, 可使攝影機進行變焦, 最高可達 10 倍 歸位 : 選擇 歸位 按鈕可回到出廠時預設的歸位位置 攝影機預先設定 : 您可以設定多達 3 個攝影機預先設定位置 首先使用遙控器調整攝影機調整至定位, 然後按住一個攝影機預先設定按鈕 3 秒鐘不放以儲存該位置 之後您可隨時按一下攝影機的攝影機預 Logitech PTZ Pro Camera 先設定按鈕, 將攝影機恢復到您定義的位置 使用預先設定 1 作為您自己定義的 歸位 位置 攝影機重新連接到 PC 後會恢復到預先設定 1 所設定的位置 若預先設定 1 沒有設定任何位置, 攝影機會恢復到預設的歸位位置 所有 3 個預先設定預設都是設定為出廠歸位位置 遠端控制 : 選擇此按鍵並使用從 www.logitech.com/support/ptz 下載的應用程式, 可從支援的應用程式遠端控制羅技 ConferenceCam 產品或 C930e 網路攝影機 PC 版本的下載應用程式也提供有攝影機選擇和平移 傾斜 變焦等工具, 以及從本機停用該功能的能力 詳細資訊請瀏覽上述的下載頁面 繁體中文 11
安裝攝影機 x2 更換遙控器電池 PTZ Pro 遙控器使用 CR2032 鋰電池 電池壽命隨使用情況而異 疑難排解技巧請造訪 www.logitech.com/support/ptz, 查看疑難排解技巧 軟體工具資訊以及可協助您解決使用 PTZ Pro 可能發生之任何問題的診斷工具 12 繁體中文
제품설명 Logitech PTZ Pro Camera 1 4 9 5 10 6 7 11 8 2 13 14 3 12 15 카메라 1. 10배무손실확대 / 축소 2. 카메라 LED 3. 켄싱턴 락홀 리모컨 4. 미러 5. 확대 6. 상하이동및기울기 7. 축소 8. 카메라사전설정 1, 2, 3 9. 비디오음소거 10. 파엔드컨트롤 11. 홈 12. 리모컨배터리도어 액세서리 13. 카메라마운트 14. 케이블락 15. 케이블 한국어 13
제품설정 a b c 1. 카메라를테이블또는마운트를사용하여벽에설치합니다. 2. PTZ Pro 카메라를연결합니다 ( 위다이어그램참조 ). 3. 카메라포트에케이블을넣기전에케이블락을연결합니다. 4. 외부전원에연결합니다. 5. PC 또는 Mac 응용프로그램에서비디오를시작하려면 USB 포트에 USB 케이블을연결합니다. 6. 카메라 LED 가깜빡이며연결이되고있음을나타내고, 완료되면카메라헤드가회전합니다. 7. 이러한작업이수행되지않으면, 다시시도한후문제해결을참조하거나기술지원부에전화하십시오. 8. 응용프로그램에서화상통화를시작합니다. 스트리밍이시작되면카메라의 LED 가켜집니다. 14 한국어
Product Central 방문 Logitech PTZ Pro Camera 제품의전체기능을알아보십시오. 편리한 FAQ 를탐색하여유용한정보및사용팁을알아보십시오. 제품질문에대한답변을찾고제품설정을위한도움을받으십시오. 제품환경을개선할수있는다운로드가능한소프트웨어가있는지알아보십시오. 로지텍제품의모든이점을활용하려면 www.logitech.com/support/ptz 를방문하고로지텍의광범위하고유용한지원서비스를이용하십시오. 문제해결 진단 펌웨어업그레이드 지원커뮤니티 소프트웨어다운로드 제공설명서 보증정보 예비부품 ( 해당되는경우 ) 한국어 15
제품사용 비디오 비디오시작 : 비디오는응용프로그램으로제어하며카메라를선택하면시작되고응용프로그램에서비디오가시작됩니다. 비디오가스트리밍되고있는경우 LED가켜집니다. 리모컨의컨트롤을사용하여카메라를상하이동하고기울입니다. 조정하려면한번누르고, 계속상하이동하거나기울이려면계속누릅니다. 주의 : 웹캠헤드를수동으로회전하지마십시오. 그렇게하면장치가손상될수있습니다. 확대 / 축소버튼을눌러 10배까지카메라를확대 / 축소합니다. 홈 : 맨처음의기본홈위치로돌아가려면홈버튼을선택합니다. 카메라사전설정 : 최대 3개의카메라사전설정위치를설정할수있습니다. 먼저리모컨을사용하여카메라위치를설정한다음, 카메라사전설정버튼중하나를 3초동안눌러해당위치를저장합니다. 사전설정버튼을한번누르면언제든지정의된위 치로돌아갈수있습니다. 사전설정 1을사용자가정의한 홈 위치로사용합니다. 카메라가 PC에다시연결되면사전설정 1에지정된위치로돌아갑니다. 사전설정 1에대해지정된위치가없으면카메라가기본홈위치로돌아갑니다. 기본적으로 3개사전설정모두맨처음의홈으로설정됩니다. 파엔드컨트롤 : 이키를선택하고 www.logitech.com/support/ptz에서응용프로그램을다운로드하면, 지원되는응용프로그램에서모든로지텍 ConferenceCam 제품또는 C930e 웹캠의상하이동, 기울기및확대 / 축소를제어할수있습니다. 카메라선택과상하이동, 기울기및확대 / 축소도구는다운로드가능한 PC용응용프로그램에서사용할수있으며, 이기능을로컬로비활성화할수도있습니다. 자세한내용은나열된다운로드페이지를참조하십시오. 16 한국어
카메라장착 x2 Logitech PTZ Pro Camera 리모컨배터리바꾸기 PTZ Pro 리모컨은리튬이온 CR2032 배터리로실행됩니다. 배터리수명은사용법에따라달라집니다. 문제해결팁문제해결팁, 소프트웨어도구정보및 PTZ Pro에서발생할수있는문제해결에도움이되는진단도구는 www.logitech.com/support/ ptz를참조하십시오. 한국어 17
18
19
www.logitech.com 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Microsoft, Windows Vista, Windows, and the Windows logo are trademarks of the Microsoft group of companies. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. 620-006477.002