Samyang Engineering Plastics
Samyang Engineering Plastics 연혁 HISTORY 1924. 10. 창업 Began as Samsu company 1955. 12. 울산 제당공장 준공 Built sugar refining facility in Ulsan 198. 10. 전주 Polyester 공장 준공 Built polyester fiber facility in Jeonju 199. 04. 삼양 종합연구소 설립 Established Samyang R&D Center 1988. 04. 전주 EP공장 준공 Built Engineering plastics facility in Jeonju 1989. 0. 삼양화성(주) 설립 Polycarbonate Established Samyang Kasei in Jeonju 1994. 05. ISO 인증 (1) Certified of ISO 199. 12. ISO 인증 (14001) Certified of ISO 04. 05. 삼양공정소료(상해) 유한공사 설립 Established Samyang Engineering plastics(shanghai) 05. 10. 삼양화성 PC 생산 Capa. 증산 (,000톤/년) Expanded polycarbonate facility (,000MT/Yr)
Products Line up Contents HISTORY () TRIREX (PC ) TRIREX (PC, ) TRILOY (PC/ABS, PC/PBT, PC/PET) TRIBIT (PBT) TRIPET (PET) TRIEL (TPEE) TRIPPE (MPPE) ABOUT US
Samyang Engineering Plastics TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior transparency, mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. Superior flow High flow D92 D50 1. 1. D8 D8 D90 D90 D D85 110 22,500 8 50 0 D48 14 12 144 1 D128 D9 5.10 5 2 5.10 5 D D149 D D D495 4 2.85 2 4 2.85 2 UL94 D955 V2 V2 Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRIREX Polycarbonate General Applications Ultra Low Viscosity Key pad Very Low Viscosity MD Shell M/P HSG Low Viscosity H/Lamp, Cup Baby feeding Bottle Goggle Medium Viscosity Lamp HSG Knob Very High Viscosity High melt Tension High Viscosity IC Tube Cover Film Water Bottle Sheet(Solid, Multi) Film General purpose High viscosity Low temp impact Blow Molding Extrusion Molding 1. 1. 1. 1. 1. 1. 80 21,500 00 21,000 00,000 85 0 850 2,000 0 880,000 80 00,000 80 145 14 14 5.10 5 14 10 5.10 5 14 1 5.10 5 1 12.010 5 12 2.5 14 1 5.10 5 4 2.85 2 4 2.85 2 4 2.85 2 4 2.90 4 2.85 2 V2 V2 V2 V2 V2 V2 These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
Samyang Engineering Plastics Antiabrasion NonHalogen Flame retardant 1.2 0.1 1.28 0.12 1. 1. 1. 0 850 21,000 12 0 850 12 5 8 2,000 00 122 00 122 144 1 144 1 8 144 1 144 1 12 5.10 5 10 5.10 5 50 5.510 5 11 5.510 5 1 5.510 5 4 2.85 2 4 2.85 2 4 2.90 90 4 2.80 0.0082 90 4 2.80 0.0082 90 (0.5mm) (1/8) Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRIREX Polycarbonate Reinforced TRIREX CHARACTERISTICS Superior impact resistance Workable under a wide range of temperatures ( through ) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance Applications Antiabraison UL94 Good Surface Dimensional Stability G/F Reinforced Dimensional Stability Key board Insert Charger, Enclosure LCD B/L FRAME, Battery Case Camera Body Lens HSG Electric M/C HSG LCD B/L FRAME Connector, Good surface & Dimensional Stability G/F G/F reinforced G/F G/F reinforced, NonHalogen 1.2 1.4 1. 1. 1.4 1.4 1. 1. 1.4 0.1 0.12 0.1 0.12 0.12 0.11 0.1 0.12 0.11 80 1,000,000 8 121 500 8 1,000 5,000 5 122 850 10 1,0 5,000 12 121 880 9 1,400 40,000 121 1,0 8 1,0 50,000 1 122 1,0 1,00 5,000 21 122 850 10 1,0 5,000 12 121 890 9 1,400 40,000 121 1,0 1,00 5,000 21 122 145 14 144 144 8 1 14 1 14 2 148 4.5 149 14 1 14 14 1 14 10 4.10 5 1.910 5 4.10 5.10 5 2.10 5 1.910 5 4.10 5.10 5 1.910 5 4 1 2.9 4 1.29 4 1 2.9 4 1.05 4 1.11 4 1.29 4 1 2.9 4 1.11 4 1.11 V2 V2 V2 0.~0.5 0.~0.5 0.~0.5 0.~0.5 0.~0.5 0.~0.5 0.~0.5 0.~0.5 0.~0.5 These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
Samyang Engineering Plastics TRILOY is the registered trademark of alloy resins(pc/abs,pc/pbt and PC/PET etc.) manufactured by Samyang Corporation. PC/ABS is used for various applications requring high impact resistance, PC/PBT displays good resistance against oils, solvents as well as high impact which makes it suitable for automotive applications. PC/PET is superior surface and high heat resistance allow it to be employed in housing for electric appliances. General purpose Heat resistance High heat resistance High impact for low temp Weather resistance D92 D50 1.08 1.1 1.14 1.1 1.1 D8 D8 D90 D90 D D85 550 0 0 580 140 850 0 110 0 850,000 550 800,000 80 500 80 110 D48 110 11 105 D128 D9.10 5 12.10 5 9.10 5.10 5.10 5 D D149 D D D495 5 12 5 12 5 12 5 12 5 12 UL94 D955 Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRILOY PC/ABS, PC/PBT, PC/PET TRILOY CHARACTERISTICS Superior impact resistance High impact for low temp Excellent processability High heat resistance Good dimensional stability Excellent surface finish Applications PC/ABS Alloy Instrument Panel OA HSG, Monitor HSG Door Handle, Helmet Shell PC/PBT Alloy Bumper B/Beam Out D/Handle Guarnish PC/PET Alloy Mirror HSG Cooker Base Consumer Parts (HALOGEN TYPE) Flame retardant (NONHALOGEN TYPE) Flame retardant High Impact Good flow High strength Heat resistance Flame retardant 1. 1.22 1. 1. 1. 1.18 1. 1.21 1.21 1.2 1. 500 00 21,000 40 110 0 50 8 24,000 5 800 2,000 50 0 2,000 2 0 80 800 40 90 850 2,000 55 11 540 19,000 110 0 0 2,000 00 800 80 0 2,000 10 105 11 8 * 10 1* 9 * 90 * 104 12** 18** 1** 1 *** 105 5*** 8.10 5 8.10 5 8.10 5 8. 10 5 8.10 5 8.10 5 8.10 5 8.10 5 8.10 5 8.10 5 8.10 5 5 5 9 9 9 9 5 2 5 2 5 2 2 121 2 121, 5VB(1/10) 0.4~0. 0.~1.2 0.~1.2 0.~1.2 0.~1.2 0.~1.2 These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
Samyang Engineering Plastics TRIBIT is the registered trademark of polybutylene terephthalate resin manufactured by Samyang Corporation. PBT is a kind of saturated polyester, which has excellent mechanical properties. It is a well balanced engineering plastics with electrical performance. D92 D50 Medium viscosity 1.1 0.1 High viscosity 1.1 0.1 Very high viscosity 1.2 0.1 D8 D8 D90 D90 D D85 550 8 5 550 0 80 21,500 550 0 80 21,000 119 D128 40 8* D48 5 5 5 D9 910 5 910 5 910 5 D D149 D D D495.2 0.02 180.2 0.02 180.2 0.02 180 UL94 D955 1.4~2. 1.4~2. 1.4~2. Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRIBIT Polybutylene Terephthalate TRIBIT CHARACTERISTICS Excellent mechanical properties Good heat resistance Good dimensional stability Excellent chemical resistance High electrical performance Applications General Extrusion, Cable Loose Tube High Flow, High Impact Connector G/F reinforced () Muffler, Connector G/F reinforced () Relay, Socket, Bobbin Flame Retardant S/W, Connector G/F G/F, V2 high flow Impact resistance G/F reinforced G/F reinforced, Flame retardant Flame retardant Flame retardant 1. 1. 1.50 1.52 1.5 1.59 1.8 1.42 0.1 0.1 0.08 0.0 0.08 0.0 0.08 0.08 580 500 1, 1,400 1, 1,400 550 5 5 5 5 40 40 800 00 1,500 2,000 1,500,000 8 850 2,000,000 50,000 80,000,000 95,000 2,000 24,000 1 11 9 119 1 11 * 50* * 45* 145 2 2 2 2 5 210 2 5 210 910 5 910 5 10 5 10 5 10 5 10 5 910 5 910 5 21 18 18.2.2.2.2.1.2.2.2 0.02 0.02 0.02 0.02 0.02 0.01 0.02 0.02 180 180 1 110 1 1 V2 1.4~2.2 1.4~2.2 ~1.2 ~1.2 ~1.2 ~1.2 ~1.2 ~1.2 These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
Samyang Engineering Plastics TRIPET is the registered trademark of polythylene terephthalate resin manufactured by Samyang Corporation. PET is a kind of saturated polyester, specially G/F reinforced TRIPET has excellent heat resistance, good surface, chemical resistance and high electrical performance D92 D50 1.5 0.1 G/F G/F reinforced 1. 0.1 G/F, G/F reinforced, Flame retardant 1.1 0.1 1. 0.1 D8 D8 D90 D90 D D85 1,400 2,000 90,000 10 122 1,500 1,800,000 9 119 1,500 1, 90,000 9 114 1,0 2,400 85,000 8.5 111 D128 D48 D9 D D149 D D D495 UL94 D955 5 0 2 10 5 24.5 0.01 1 ~0.4 28 0 2 10 5.9 0.01 1 ~0.4 5 245 2 10 5.8 0.0 80 ~0.4 Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose. These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties. 245 2 10 5.9 0.0 80 ~0.4
TRIPET Polyethylene Terephthalate TRIPET CHARACTERISTICS Good processability Superior surface Excellent Mechanical properties High Heat resistance Excellent oil and solvent resistance Applications G/F reinforced () Rotor Cover G/F reinforced () Iron Body, Coil Bobbin Relay Base
Samyang Engineering Plastics TRIEL is the registered trademark of thermoplastic polyester ester elastomer manufactured by Samyang Corporation. TRIEL resins offer superior mechanical properties, elasticity, heat resistance, flexibility and chemical resistance, which allow it to be widely used for electric/electronic equipments, automotive parts and outdoor recreation equipments General purpose(gp) ASTM D2240 5 40 45 50 55 ASTM D92 1.1 1.12 1.14 1. 1.1 1.18 ASTM D50 0.5 0.5 0.45 0.45 0.45 0.45 ASTM D955 1.1~1.2 1.2~1. 1.4~1.5 1.5~1. 1.5~1. 1.~1. ASTM D8 12~14 ~19 22~24 0~ 95~ 1~1 ASTM D8 28~ ~8 4~45 95~ ~1 ~5 ASTM D8 58~ 8~0 8~80 1~1 ~5 1~180 ASTM D8 ASTM D ASTM D ASTM D90 0 400 00 1,00 2,00 4,0 ASTM D90 40 110 1 ASTM D21 18 189 0 222 222 22 ASTM D49 52 54 5 49 54 1 ASTM D 108 12 14 8 1 8 ASTM D128 28~ 22~24 ~18 11~12 9~10 8~9 Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRIEL Thermoplastics Poly Ether Ester Elastomer TRIEL CHARACTERISTICS Easy processibility High elastic performance Good weather resistance Superior heat resistance Remarkable chemical resistance Good dimensional stability Excellent abrasion resistance High impact strength Applications Injection Grade M/P, Helmet Parts Cable, CVJB Sports Goods Elastic Fiber Spandex Special Grade M/P Parts USB Cover General purpose(gp) Blow molding(bm) Elastic Fiber Special purpose(sp) 5 0 40 50 40 1.2 1.22 1.24 1. 1. 1.1 1.14 1.05 1.0 1.14 0.45 0.45 0.45 0.4 0.45 0.45 0.45 0.5 0.5 0.5 1.~1. 1.~1.8 1.8~1.9 1.9~2.0 1.5~1. 1.8~1.9 1.4~1.5 1.~1. 1.~1. 1.~1. 15~0 1~180 2~2 20~2 42~45 50~55 22~24 12~14 12~14 14~1 190~195 240~245 280~285 50~55 8~2 85~90 4~45 18~ 24~2 28~ 0~5 5~2 280~285 ~ 140~ 8~80 28~ 48~50 58~ 0 0 11 10 10 12,500 8,500 11,000 1,000 1,800,000 00 1 0 2 290 80 450 80 40 10 222 222 22 22 2 2 2 2 18 0 110 122 12 5 5 4 52 188 195 2 8 14 5 1 111 ~8 ~ 4~5 ~4 1.0~1.2 2.5~.0 ~18 8* * 28~ These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
Samyang Engineering Plastics TRIPPE is the registered trademark of modified Polyphenylene Ether resin manufactured by Samyang Corporation. MPPE is a kind of amorphous polymer which is excellent electrical performance, mechanical properties, which allows it to be widely used for electrical, electronic and automotive parts. D 92 D 50 1.08 0.0 (V1) 1.08 0.0 1.0 0.0 1.10 0.0 () 1.10 0.0 1.10 0.0 D 8 D 8 D 90 D 90 D D 85 0 90 22,400 480 880 24,400 2 1,000 2,500 119 4 1 00 24,000 114 480 2 850,000 2 580 9 2,000 D 48 80 95 85 95 105 D 128 D 9 24 10 5 18 10 5.5 10 5 28 10 5 10 5 10 5 D D 149 D D D 495 18 2.9 0.000 18 2.9 0.000 18 2.9 0.000 1 2. 0.000 1 2. 0.000 1 2. 0.000 UL 94 D 955 V1 V1 V1 Property values shown are average values that can be expected from typical manufacturing lots and are not intended for specific purpose.
TRIPPE Modified polyphenylene Ether TRIPPE CHARACTERISTICS Excellent mechanical properties Good dimensional stability Low moisture absorbency High electrical performance Good heat resistance Applications Non Reinforced () Reinforced () Non Reinforced (V1) Reinforced (V1, ) Alloy OA Chassis DY Bobbin Pump, Telephone Parts FBT Bobbin Out D/Handle Water Tank Bumper Guard Alloy () GF() GF(V1) GF() PPE/PA PPE/PP 1.10 1.0 1.12 1.12 1.2 1.1 1. 1.12 1.2 1. 1.10 0.98 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.5 0.5 10 840 1,050 840 1,550 1, 1,4 1,50 1, 90 4 2. 1.5 1. 2.5 1.5 1,140 1,0 1,4 1,50 1,90 1,4 1,4 1,80 1,4 1,50 1, 1,040 0 2,500 2,500 4,800 5,0 89, 4,800 4,800 88,00 4,800,0 8,0,400 19,0 14 2 4.5 12 12 124 124 124 122 124 121 145 12 12 14 1 1 1 1 1 82 11 1.8 4. 4.0 2.2 5 4.5 2.4.1.4 2.4.0 5.5 10 5 10 5 410 5 410 5 10 5 10 5 410 5 410 5 410 5 410 5 10 5 410 5 410 5 18 18 19 18 22 5 2. 2. 2.80 2.85 2.90 2.9 2.95 2.98 2.9 2.95 2.98 2.9 0.000 0.000 0.0008 0.0009 0.0009 0.0009 0.00 0.00 0.0009 0.00 0.00 0.00 0.00 0 0 0 0 1 V1 V1 V1 0.4~0.5 ~0.4 ~0. 0.4~0.5 ~0.4 ~0.4 ~0.4 ~0.4 ~0.4 1.1~1. 1.2~1.4 These values are for natrural color grades only. Addition of pigments and other additive may alter some of properties.
About Us
Overseas Business With Excellent quality, service, and global network, Engineering Plastics of Samyang goes all over the world.
www.samyang.com