신청기관 ( 인 ) Applicant : ( 주 ) 피에스엠씨 : PSMC Co., Ltd. 주소 ( 한글 ) : 경기도화성시향남읍바란공단로 4길 16 우 )18623 Address (Engl.) : 16, Barangongdan-ro 4-gil, Hyangnam-eup, Hwaseong-si, Gyeonggi-do, 18623 Korea 발행면수 (Page) : 1 of 9 시료명세 (Sample Description) : 시료에대한상세한정보는아래와같음 (The following submitted sample(s) said to be) 제품명 / 형식 : LEAD FRAME (Cu Alloy PMC90) (Name/Type of Product) 시료고유번호 (Sample ID No.) : RT17R-U1026 (RT17R-U1026) 제품생산자 / 공급자 : ( 주 ) 피에스엠씨 (Manufacturer/Vendor) (PSMC Co., Ltd.) 시료접수일자 : 2017. 06. 07. (Sample received) (Jun. 07, 2017) 시험일자 : 2017. 06. 07. ~ 2017. 06. 13. (Testing Date) (Jun. 07, 2017 ~ Jun. 13, 2017) 시험유형 : RoHS 화학분석 (Test Type) (RoHS wet chemical analysis) 시험방법 (Test Method) 시험결과 (Test Result) : 이시험성적서의다음페이지첨부 (Please see the following page) : 이시험성적서의다음페이지에첨부 (Please see the following page) 비고 (Notes) : 1. 이시험성적서는제시된시료및시료명으로시험한결과로서유사대상시료에적용할수없음. (The Test Results presented in this report relate only to the object tested.) 2. 이시험성적서는승인없이복사사용을금함. (This report shall not be reproduced except in full without the written approval of the testing laboratory.) 승인자 (Approved by) 권한자 (Authorized by) 이응용 / 기술책임자 (E.Y.Lee/ Lab. Technical Manager) 유환우 / 소장 (H.W.Yoo / Lab. General Manager) Authenticity check
발행면수 (Page) : 2 of 9 시험항목 (Test Item) 단위 (Unit) 분석방법 (Test Method) 검출한계 (MDL) 시험결과 (Result) 카드뮴 (Cadmium, Cd) With reference to 0. 납 (Lead, Pb) IEC 62321- Edition 1.0 : 2013, by acid digestion and determined by ICP-OES 2 수은 (Mercury, Hg) 6 가크롬 (Hexavalent Chromium, Cr 6+ ) (For metal) Tested by : JH Jin, BJ Ha μg /cm 2 With reference to IEC 62321-4 Edition 1.0 : 2013, by acid digestion and determined by ICP-OES With reference to IEC 62321-7-1 Edition 1.0 : 201, by boiling water extraction and determined by UV-VIS Spectrophotometer 2 0.10 Negative Notes : = ppm = parts per million ( 함량표시 : 백만분의일 ) μg /cm 2 = microgram per square centimeter < = Less than ( 결과값이하 ) = Not detected (< MDL, 미검출 검출한계이하 ) MDL = Method detection limit ( 검출한계 ) Remarks : Interpretation of Cr 6+ results Qualitative result Concentration of Cr 6+ ( μg /cm 2 ) Negative < 0.10 Inconclusive 0.10 and 0.13 Positive > 0.13 Meaning The sample coating is considered a non-cr 6+ based coating. Unavoidable coating variation may influence the determination. The sample coating is considered to contain Cr 6+. 1. The qualitative results should be determination by the average result of three test results. (If concentration of Cr 6+ is over 0.10 μg /cm 2 ) 2. The above results will be carried out by visual comparison only with the standard.
발행면수 (Page) : 3 of 9 시험항목 (Test Item) Tested by : JH Jin 단위 (Unit) 폴리브롬화비페닐 (Polybrominated Biphenyls, PBBs) 모노브로모비페닐 (MonoBB) Notes : = ppm = parts per million ( 함량표시 : 백만분의일 ) < = Less than ( 결과값이하 ) = Not detected (< MDL, 미검출 검출한계이하 ) MDL = Method detection limit ( 검출한계 ) 분석방법 (Test Method) 검출한계 (MDL) 시험결과 (Result) 다이브로모비페닐 (DiBB) 트라이브로모비페닐 (TriBB) 테트라브로모비페닐 (TertaBB) 펜타브로모비페닐 (PentaBB) 헥사브로모비페닐 (HexaBB) 헵타브로모비페닐 (HeptaBB) With reference to IEC 62321-6 Edition 1.0 : 201, by solvent extraction and determined by GC/MS 옥타브로모비페닐 (OctaBB) 노나브로모비페닐 (NonaBB) 데카브로모비페닐 (DecaBB) 폴리브롬화디페닐에테르 (Polybrominated Diphenyl Ethers, PBDEs) 모노브로모디페닐에테르 (MonoBDE) 다이브로모디페닐에테르 (DiBDE) 트라이브로모디페닐에테르 (TriBDE) 테트라브로모디페닐에테르 (TetraBDE) 펜타브로모디페닐에테르 (PentaBDE) 헥사브로모디페닐에테르 (HexaBDE) 헵타브로모디페닐에테르 (HeptaBDE) With reference to IEC 62321-6 Edition 1.0 : 201, by solvent extraction and determined by GC/MS 옥타브로모디페닐에테르 (OctaBDE) 노나브로모디페닐에테르 (NonaBDE) 데카브로모디페닐에테르 (DecaBDE)
발행면수 (Page) : 4 of 9 시험항목 (Test Items) 베릴륨 (Berylium, Be) 안티몬 (Antimony, Sb) 브롬 (Bromine, Br) 염소 (Chlorine, Cl) 퍼플루오로옥탄설포네이트 (Perfluorooctane sulfonate, PFOS) 퍼플루오로옥타노익에시드 (Perfluorooctanoic acid, PFOA) Tested by : MB Song, BJ Ha, Yongsung Kim 단위 (Unit) Notes : = ppm = parts per million ( 함량표시 : 백만분의일 ) < = Less than ( 결과값이하 ) = Not detected (< MDL, 미검출 - 검출한계이하 ) MDL = Method detection limit ( 검출한계 ) 분석방법 (Test Methods) With reference to US EPA 302, by acid digestion and determined by ICP-OES With reference to US EPA 302, by acid digestion and determined by ICP-OES With reference to EN 1482, by oxygen combustion with bomb and determined by IC With reference to EN 1482, by oxygen combustion with bomb and determined by IC With reference to US EPA 30C/8321B, by ultrasonic extraction and determined by LC/MS/MS With reference to US EPA 30C/8321B, by ultrasonic extraction and determined by LC/MS/MS 검출한계 (MDL) 시험결과 (Results) 2 2 30 30 0.1 0.1
발행면수 (Page) : of 9 * 시료접수시시료상태 : (View of sample as received)
발행면수 (Page) : 6 of 9 Flow Chart (IEC 62321 Edition 1.0) Receipt Sampling/ Grinding or Cutting Pb, Cd, Hg Cr 6+ PBBs /PBDEs Metal For different material, digest the sample with appropriate acid *1 Get 0cm 2 sample Weigh sample and add organic solvent Confirm the tested samples are totally dissolved *2 Make up with deionized water Boiling water extraction Make up with deionized water and add diphenyl-carbazide solution Soxhlet extraction or solvent extraction Concentrate the extract and make up with organic solvent Analyzed by ICP-OES Analyzed by UV-VIS Analyzed by GC-MS Remarks : *1 : List of appropriate acid: Material Acid added for digestion Polymers HNO 3, HCl, HF, H 2O 2, H 3BO 3 Metals HNO 3, HCl, HF Electronics HNO 3, HCl, H 2O 2, HBF 4 *2 : The samples were dissolved totally by pre-conditioning method according to above flow chart.
발행면수 (Page) : 7 of 9 Flow Chart (Metal Testing) Receipt Sample preparation Sample measurement NO Microwave digestion with HNO 3 / HCl / HF Total digestion YES Analyzed by ICP-OES ** Remarks : The samples were dissolved totally by pre-conditioning method according to above flow chart.
발행면수 (Page) : 8 of 9 Flow Chart (Halogen) Receipt Sample preparation Sample weighing Bomb preparation Combustion Absorption solvent preparation of absorption solution Cooling, for 1hr Collection of halides make up Vol. 100mL Analyzed by IC
발행면수 (Page) : 9 of 9 Flow Chart (PFOS, PFOA) Receipt Sample preparation Loading in a vial Methanol loading Ultrasonication Filtering & Cleaning Make up (Methanol) Analyzed by LC/MS/MS ***** End of ***** Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: http://www.intertek.com/terms/. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. This report is made solely on the basis of your instructions and / or information and materials supplied by you and provide no warranty on the tested sample(s) be truly representative of the sample source. The report is not intended to be a recommendation for any particular course of action, you are responsible for acting as you see fit on the basis of the report results. Intertek is under no obligation to refer to or report upon any facts or circumstances which are outside the specific instructions received and accepts no responsibility to any parties whatsoever, following the issue of the report, for any matters arising outside the agreed scope of the works. This report does not discharge or release you from your legal obligations and duties to any other person. You are the only one authorized to permit copying or distribution of this report (and then only in its entirety). Any such third parties to whom this report may be circulated rely on the content of the report solely at their own risk. This report shall not be reproduced, except in full.