Windows 8/7/Vista/XP SAFETY INSTRUCTIONS & INSTALLATION MANUAL 안전지침 - CPM-100G3/CPM-100HG3 - The Manual provides the following information. Be sure to read it before installing into your personal computer. Precautions for using the CPM-100G3/CPM-100HG3 How to install and uninstall BepopPC software How to install and uninstall the printer driver How to set the IP Address of the CPM-100HG3 Basic usage of BepopPC software The manual responds to BepopPC exclusive CD-ROM. Note that other Bepop exclusive CD-ROM versions require completely different operating systems and operating methods. The CD-ROM responds to Windows 8/ 7/Vista/XP. Keep this manual together with the Instruction manual for CPM-100G3/CPM-100HG3. It is prohibited to reproduce part or all of the manual without our permission. The information in the Manual is subject to change without prior notice. N152N
CONTENTS For details of BepopPC, see Help or PDF Manual. [Preparing the CPM-100G3/CPM-100HG3]... 2 Be Sure to Read... 2 Precautions for Use... 3 1 Confirming the Package Contents... 4 2 Component Units and Their Functions... 4 3 Working with the Sheet... 5 4 Working with the Ink Ribbon Cassette... 6 5 Working with the Cutting Tool... 7 [Installing the BepopPC Software]... 16 Notes... 16 6 What is Possible with BepopPC... 17 7 Important: Read before Installation... 18 7.1 Environment of PCs Capable of Running with This Software... 18 7.2 Precautions for Installation... 18 7.3 Restrictions and Other Precautions... 19 8 Installation and Uninstallation... 20 8.1 Setup Menu... 20 8.2 Installing BepopPC Software... 21 8.3 Uninstalling BepopPC... 25 8.4 Installing only the Printer Driver... 26 8.5 Uninstalling the Printer Driver... 27 9 Setting the IP Address of the CPM-100HG3... 28 9.1 Restrictions for LAN Connection... 28 9.2 Setting the IP Address of the CPM-100HG3... 29 10 Usage of BepopPC (1): Input and Output of Characters... 30 10.1 Inputting the Characters... 30 10.2 Outputting to Bepop... 31 10.3 Checking the Remaining Sheet Length... 31 11 Usage of BepopPC (2): Import of Logo or Mark... 32 11.1 Reading the Logo or Mark from the Scanner... 32 11.2 Calling the Saved Symbol (When Using for BepopPC)... 34 12 Troubleshooting... 35 Trademarks used in this manual * Windows is a registered trademark of Microsoft Corporation. 1
For the customers in the USA [Preparing the CPM-100G3/CPM-100HG3] Be Sure to Read Indications The Manual and product use various indications to ensure that you can use the machine safely and correctly. The following describes the indications: WARNING CAUTION NEGLIGENCE OF THIS COULD LEAD TO A DEATH OR SERIOUS INJURY OF A WORKER. NEGLIGENCE OF THIS COULD LEAD TO AN INJURY OF A WORKER, DAMAGE YOUR PROPERTIES ONLY, OR CAUSE CREATED DATA TO BE LOST. Symbols Denotes what you should be aware of. A specific caution is given in or close to this symbol. Denotes what you must not do. A specific prohibition is given in or close to this symbol. Denotes what you must do. A specific instruction is given in this symbol. 2
[Precautions for Use] WARNING Never disassemble or remodel the machine it could result in a fire, electric shock, or trouble. Do not insert any foreign object into the machine, such as a finger, pen, wire, etc., it could result in a fire, electric shock, or trouble. Obtain power directly from an electrical outlet. Do not put multiple loads on the electrical outlet it could cause a fire. Never place a heavy object on a power cord it may damage the cord, resulting in a fire or electric shock. Do not connect or disconnect a power plug with a wet hand You could receive an electric shock. Ensure that no water or chemicals are splashed over the machines. If water, etc., gets inside for some reason, disconnect the power plug immediately from the electrical outlet, and contact your dealer for repair. If the machine is used in such a state, it could malfunction or result in a fire or electric shock. Never put a hand or an object into a cutter section it can both cause machine trouble and be dangerous to your body. Run the machine only on the indicated supply voltage use of any other voltage could result in a fire or trouble. Keep a cutting tool (blade) out of the reach of children. If swallowed, seek immediate medical attention. Do not use the machine if it has a symptom of a problem, such as smoke, abnormal sound, or foul odor such use could result in a fire or electric shock. In such a case, immediately disconnect the power plug from the electrical outlet, and contact your dealer for repair. CAUTION Do not share an electrical outlet with any device (air conditioner, refrigerator, microwave, office automation equipment, etc.) that requires a large capacity it could lower the supply voltage and cause the machine to malfunction. Do not place paper or cloth on the machine it could result in a fire or trouble. Never touch a thermal head. Immediately after printing, it is very hot and could burn you. Also, if the thermal head is thumbed, it may cause trouble. Clean the power plug periodically dust accumulated over a long period could cause a fire or trouble. When disconnecting the power plug, hold it directly never pull on the power cord. Pulling on the cord can damage it, resulting in a fire or electric shock. When printing or cutting does not function properly due to jamming of an adhesive sheet, ink ribbon, or foreign object inside the machine, be sure to turn off the power before eliminating jamming abrupt activation of the machine could cause an injury. When opening or closing a door cover, be careful not to get a hand, etc., caught. When moving the machine, be sure to close the door cover and hold the sides of the body to carry it neglecting this could cause an injury or trouble. When replacing the cutting tool (blade) or mounting/dismounting a sheet, be sure to turn off the power. Otherwise, you could be injured by abrupt activation of the machine. Note that the cutting edge of the replacement blade is very sharp. Do not touch the tip of the cutting tool (blade) you may be injured. Install the machine on a flat surface. If installed in an unstable place, it may fall and injure you. When not using the machine for a long time, such as consecutive holidays, be sure to disconnect the power plug from the electrical outlet, for safety. Data saved in a personal computer cannot be saved permanently. We cannot be responsible for damage due to loss of data attributable to trouble or repair, or lost profit. Do not directly touch the connector with hand. Static electricity may cause trouble. 3
PRODUCT SPECIFICATIONS Product CPM-100G3 CPM-100HG3 Printing method Thermal transfer Printer section Printing density 203dpi 400dpi Printing speed 25 mm/sec. (1 /sec.) Cutter section Resolution 0.025 mm/step (0.001 /step) Cutting speed 120 mm/sec. (4.7 /sec.) at maximum Maximum output range 100 mm (3.9 ) x 2000 mm (78.7 ) Interface USB2.0 full speed USB2.0 full speed LAN 10baseT/100baseTX Working environment Temperature: 10-35 C, Humidity: 35-80 % (No dew condensation allowed) Power source AC 100-240 V 50/60 Hz 1A Power consumption 85 W Outer dimensions 330 mm (13.0 ) x 320 mm (12.6 ) x 320 mm (12.6 ) (W) x (D) x (H) Mass (Main body only) 9 kg (19.8lbs.) FCC Notice (Class B: CPM-100G3/CPM-100HG3) Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. MAX USA CORP. ADDRESS : 257 East 2nd Street Mineola, NY 11501, U.S.A. PHONE : (516)741-3151 FAX : (516)741-3272 4
1. Confirming the Package Contents Open the package and confirm that all of the following items are included. <1> CPM-100G3/CPM-100HG3 <2> AC cable <3> Blade (1 pc.) <4> Tweezers) <5> Squeegee) <6> Tool Holder (Attached upon shipment) <7> Tool holder replacing spanner <8> Application Software CD <9> Installation Manual (this manual) 2. Component Units and Their Functions [Front of Main Body] [Back of Main Body] Handle (Right and Left) Door Cover Opening/Closing Lever Thermal Head Cutting Tool Cutting Head Sheet Outlet LED Lamp Cutting Pressure Control Dial Scissors Key Sheet Feed Key (Back) Sheet Feed Key (Forward) Power Key USB Connector Sheet Retainer Sprocket Dust Removal Lever (Silver) Power Connector LAN Connector (Only CPM-100HG3) Sheet Holder [Main Key Functions] Power key : Used to turn on/off the power. Sheet feed keys : Used to feed the sheet. LED lamp : Illuminated in green when the Power switch is turned on. It is illuminated or blinks in red when informing you of an error. 5
3. Working with the Sheet Loading the Sheet 1. After turning off the power, pull up the door cover opening/closing lever to open the door cover. 5. Pull out the sheet forward to put it through under two sheet retaining rollers. Sheet Retaining Roller 2. Lift up the dust removal lever (silver). Sheet Retaining Roller Black Roller Dust Removal Lever (Silver) 6. Align the holes in the sheets with the right and left sprocket pins. Dust Removal Lever (Silver) Sprockets 3. Place the Bepop sheet on the sheet holder. 7. Lower the dust removal lever (silver) to retain the sheet. Sheet Holder 4. Put the sheet through under the dust removal lever (silver). * Put it through over a black roller. 8. Close the door cover until it clicks to lock. CAUTION When loading the sheet, be sure to turn off the power. Otherwise, you could be injured if the machine is activated abruptly. 6
4. Working with the Ink Ribbon Cassette Inserting the Ink Ribbon Cassette 1. Pull up the opening/closing lever to open the door cover. 4. Turn the ink ribbon cassette upward, using the claws as leverage. Push it in firmly until the ink ribbon locks with a click sound. Click 2. Holding the ink ribbon cassette so that its sponge faces downward, turn the ribbon gear in the arrow-indicated direction as shown in the figure to take up the slack of the ink ribbon. Removing the Ink Ribbon Cassette from the CPM-100G3/CPM-100HG3 1. Open the door cover. Pushing the snap of the ink ribbon cassette, pull it out. Claws 2. Lift the cassette upward and pull it out. 3. Fit the claws of the ink ribbon cassette into the slots in the back of the door cover. WARNING Do not touch the thermal head to prevent a burn. It could burn you. 7
5. Working with the Cutting Tool Installing (Replacing) the Cutting Tool 1. After turning off the power, pull up the opening/closing lever to open the door cover. 5. Prepare a new cutting tool (blade) and remove its protective cap. Blade 2. Move the cutting head to the center manually. 6. Holding a cutting edge (protective cap attached side) downward, insert the blade lightly into the center of the holder. * When replacing the blade, remove the old one first. 3. Using an accessory spanner, turn the tool holder in the counterclockwise direction to remove it. (Use the larger end of the spanner.) Use the larger end. 7. Tighten the holder cap. The share point will be projected appropriately by tightening the cap firmly. 8. Clamp the tool holder manually onto the cutting head. 4. Turn the cap (top) of the tool holder in the counterclockwise direction to remove it. WARNING Store the cutting tool (blade) out of the reach of children. If swallowed accidentally, seek medical attention immediately. CAUTION Prior to mounting/dismounting the cutting tool (blade), be sure to turn off the power. You could be injured if the machine is activated abruptly. Do not touch the tip of the cutting tool (blade) to prevent an injury. 8
For the customers in Korea [CPM-100G3/CPM-100HG3 를사용하시기전에 ] 꼭읽어주십시오 사용상의주의 - 한국 EMC 요구사항 이기기는가정용 (B 급 ) 으로전자파적합등록을한기기로서주로가정에서사용하는것을목적으로하며, 모든지역에서사용할수있습니다. 동기기의 EMC 등록번호 (Registration No.) 는 KCC-REM-M66-CPM-100HG3 입니다. 표시에관하여 이취급설명서및상품은본기기를안전하고올바르게사용하실수있도록여러가지표시를사용하고있습니다. 그표시및의미는다음과같습니다. 경고 주의 잘못다루었을경우, 사용자가사망또는중상을입을가능성이있으므로절대로해서는안되는일이적혀있습니다. 잘못다루었을경우, 사용자가장애를입을위험성이있으므로절대로해서는안되는일이나물적손해를입을가능성이있으므로절대로해서는안되는일이적혀있습니다. 또한, 작성하신데이터가소실될가능성이있으므로절대로해서는안되는일이적혀있습니다. 표시에관하여 [ 주의해야할것 ] 을의미합니다. 이기호속이나가까운표시는구체적인주의내용입니다. [ 해서는안될것 ] 을의미합니다. 이기호속이나가까운표시는구체적인금지내용입니다. [ 해야만할것 ] 을의미합니다. 이기호속의표시는구체적인지시내용입니다. 9
[ 사용상의주의 ] 경고 본기기는절대로분해또는개조하지마십시오. 화재, 감전, 고장의원인이됩니다. 본기기의내부에손가락, 펜, 철사등의이물질을넣지마십시오. 본기기의고장이나화재, 감전의원인이됩니다. 전원은직접콘센트에서공급하고, 문어발배선은하지마십시오. 화재의원인이됩니다. 전원코드의위에무거운것을절대로올리지마십시오. 코드가손상되어화재나감전의원인이됩니다. 젖은손으로전원플러그를꽂거나뽑지마십시오. 감전될염려가있습니다. 물, 약품등이기계에묻지않게해주십시오. 만일내부에물등이들어갔을때는전원플러그를콘센트에서즉시뽑고판매점에수리를의뢰하여주십시오. 그대로사용하면본기기의고장이나화재, 감전의원인이됩니다. 시트출구부에는절대로손이나물건을넣지마십시오. 기계고장의원인이될뿐아니라, 부상의원인이될수있습니다. 전원은 AC 220V 전용콘센트를사용해주십시오. 220V 이외의전원을사용하면본기기의고장이나화재, 감전의원인이됩니다. 반드시접지연결하여주십시오. 커팅도구 ( 교체용칼날 ) 는어린이의손이닿지않는곳에보관하여주십시오. 만일삼켰을경우에는즉시의사의지시에따라대처하여주십시오. 고장난채로기계를사용하지마십시오. 연기가나거나이상한소리나냄새가나는등, 고장난채로사용하면화재, 감전의원인이됩니다. 즉시전원플러그를콘센트에서뽑고판매점에수리를의뢰하여주십시오. 주의 용량이큰전기기기 ( 냉난방기기, 냉장고, 전자레인지, OA 기기등 ) 와콘센트를공용하지말아주십시오. 전압이내려가기계가오작동을일으킬가능성이있습니다. 종이나천을본기기위에덮거나놓지마십시오. 화재나고장의원인이됩니다. 서멀헤드를절대로만지지마십시오. 인쇄직후의서멀헤드는과열되어있으므로화상을입을염려가있습니다. 또한, 손에서묻은이물질이서멀헤드의고장원인이될수있습니다. 전원플러그는정기적으로청소하여주십시오. 먼지등이오랫동안쌓이면화재나고장의원인이됩니다. 전원플러그를뽑을때는전원코드를잡아당기지말고반드시전원플러그를잡고뽑아주십시오. 코드가파손되어화재나감전의원인이됩니다. 본기기의내부에점착시트, 잉크리본, 이물질등이걸려인쇄나가위가정상적으로동작하지않을경우에는반드시전원을끈뒤제거하여주십시오. 기계가불의에동작하여부상을입을수있습니다. 도어커버의개폐시에는손등이끼지않도록주의해주십시오. 본기기를옮길때에는반드시도어커버를닫은후본체옆면의손잡이를잡고옮겨주십시오. 부상이나고장의원인이됩니다. 커팅도구 ( 교체용칼날 ) 의교환이나시트의탈착시에는반드시전원을꺼주십시오. 기계가불의에동작하면부상을입을수있습니다. 교체용칼날의날끝은대단히날카로우므로충분히주의해주십시오. 부상의위험이있으므로커팅도구 ( 교체용칼날 ) 의끝부분은만지지않도록주의해주십시오. 기계는평평한장소에설치하여사용해주십시오. 불안정한곳에서는본체낙하로인한부상의위험이있습니다. 연휴등장시간사용하지않을때는안전을위하여반드시전원플러그를콘센트에서뽑아주십시오. PC 에저장한내용은영구적으로저장할수는없습니다. 고장, 수리등에기인한데이터의소실로인한손해및일실이익에관해서는책임을지지않습니다. 미리양해부탁드립니다. 커넥터는직접만지지마십시오. 정전기로인하여고장의원인이될수있습니다. 10
상품사양 프린트부 커팅부 최대출력범위 인터페이스 상품명 CPM-100G3 CPM-100HG3 인쇄방식 열전사방식 인쇄밀도 203dpi 400dpi 인쇄속도 분해능력 커팅속도 USB2.0 풀스피드 25 mm/sec. 0.025 mm/step 최대 120 mm/sec. 100 x 2000 mm USB2.0 풀스피드 LAN 10baseT/100baseTX 사용환경온도 :10~35 습도 :35~80%( 단, 결로가없을것 ) 전원 소비전력 크기 무게 ( 본체만 ) AC220V 60Hz 1A 85 W W330 x D320 x H320 mm 9 kg 기종별 사용자안내문 B 급기기 ( 가정용방송통신기자재 ) 이기기는가정용 (B 급 ) 전자파적합기기로서주로가정에서사용하는것을목적으로하며, 모든지역에서사용할수있습니다. 11
1. 동봉된물건을확인해주십시오상자를열어아래의물건들이빠짐없이들어있는지확인해주십시오. <1> CPM-100G3/ CPM-100HG3 <2> 전원케이블 <3> 커팅도구 (1 개 ) <4> 핀셋 <5> 스퀴지 <6> 도구홀더 ( 출하시장착되어있습니다 ) <7> 도구홀더교환용스패너 <8> PC 소프트웨어 (CD-ROM) <9> 인스톨매뉴얼 2. 본체각부의명칭과역할 [ 본체의앞면 ] [ 본체의뒷면 ] 손잡이 ( 좌우 ) 도어커버 개폐레버 서멀헤드 커팅도구 커팅헤드 시트출구 LED 램프 절단압조정다이얼 가위키시트되감기키시트보내기키전원키 USB 포트 시트고정 스프로켓 찌꺼기제거레버 ( 은 ) 전원커넥터 LAN 포트 시트홀더 (CPM-100HG3 한정 ) [ 키의주된기능 ] 전원키 : 전원을켜고끄는키입니다. 시트이동키 : 시트를이동시킬수있습니다. LED 램프 : 전원스위치가 ON 일때녹색으로점등됩니다. 에러상태를나타낼때는적색으로점등또는깜빡입니다. 12
3. 시트의취급본체에 Bepop 시트를세팅한다 1. 전원을끈뒤, 도어커버개폐레버를당겨도어커버를엽니다. 5. 시트를앞쪽으로당겨, 2 개의시트고정롤러의아래로통과시킵니다. 시트고정롤러 2. 찌꺼기제거레버 ( 은 ) 를들어올립니다. 시트고정롤러 검은롤러 찌꺼기제거레버 ( 은 ) 6. 좌우의스프로켓과시트의구멍을맞춥니다. 스프로켓 찌꺼기제거레버 ( 은 ) 3. 시트홀더에 Bepop 시트를올립니다. 7. 찌꺼기제거레버 ( 은 ) 를내려시트를고정합니다. 시트홀더 4. 시트를찌꺼기제거레버 ( 은 ) 아래로통과시킵니다. 검은롤러의위로통과시킵니다. 8. [ 찰칵 ] 소리와함께잠길때까지도어커버를닫습니다. 주의 시트를세팅할때는반드시전원을꺼주십시오. 기계가불의에동작하여부상을입을염려가있습니다. 13
4. 잉크리본카세트의취급본체에잉크리본카세트를세팅한다 1. 개폐레버를올려도어커버를엽니다. 4. 돌출부를지점으로하여위쪽으로돌려넣습니다. 스냅에서잉크리본이고정되어 [ 찰칵 ] 소리가날때까지꽉밀어넣습니다. 찰칵 2. 잉크리본카세트를스폰지가아래면이되도록 들고, 리본 기어를 그림과 같이 화살표 방향으로 돌려 잉크리본의 느슨함을 제거합니다. 본체에서잉크리본카세트를꺼낸다 1. 도어커버를열어잉크리본카세트의스냅을누르며, 앞으로끌어당깁니다. 돌출부 2. 카세트를위쪽으로돌린뒤잡아뺍니다. 3. 잉크리본카세트의돌출부를도어커버뒤쪽의홈에맞춰끼워넣습니다. 경고 서멀헤드에는손대지마십시오. 화상을입을염려가있습니다. 14
5. 커팅도구의취급커팅도구의세팅 ( 교환 ) 1. 전원을끈뒤, 개폐레버를끌어올려도어커버를엽니다. 5. 새로운커팅도구 ( 교체용칼날 ) 을준비하여보호캡을떼어냅니다. 칼날 2. 커팅헤드를손으로중앙에가져갑니다. 6. 칼날끝 ( 보호캡이있던쪽 ) 을아래로하여홀더중앙에가볍게꽂습니다. 교환시는오래된커팅도구를먼저뽑습니다. 3. 부속된스패너를사용하여도구홀더를시계반대방향으로돌려풉니다. ( 스패너는큰쪽을사용합니다. ) 큰쪽을사용 7. 홀더캡을조입니다. 캡을꽉조이면칼날끝은적절한돌출수준이됩니다. 8. 도구홀더를커팅헤드에손으로조여넣습니다. 4. 푼도구홀더의캡 ( 상부 ) 를시계반대방향으로돌려제거합니다. 경고 커팅도구 ( 교체용칼날 ) 는어린이의손이닿지않는곳에보관해주십시오. 만일삼켰을때에는즉시의시의지시에따라주십시오. 주의 커팅도구 ( 교체용칼날 ) 의탈착시에는반드시 전원을꺼주십시오. 기계가불의에동작하여부상을 입을염려가있습니다. 커팅도구 ( 교환용날 ) 의끝부분은부상을입을염려가있으니만지지마십시오. 15
[Installing the BepopPC Software] Notes 1. MAX Co., Ltd. in Japan owns copyright in this software. 2. It is prohibited to use or reproduce part or all of this software and manual without prior consent. 3. This software and manual are only allowed to be used under a license agreement to be concluded at the time of installing this software. 4. The data saved in a PC cannot be permanently saved. Note that we are not responsible for damage and lost profits by missing data attributable to trouble, repair, and so on. 5. The information described in the software specifications and manual is subject to change without prior notice. 6. The names of organizations and individuals mentioned in the samples created with this manual are fictitious and have nothing to do with the existing organizations and individuals. Microsoft and Windows are the registered trademarks of U.S. Microsoft Corporation in the U.S.A. and other countries. Adobe Reader and Adobe Illustrator are the trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and other countries. Pentium and Celeron are the registered trademarks of U.S. Intel Corporation in the U.S.A. and other countries. K6, Athlon, and Duron are the registered trademarks of Advanced Micro Devices, Inc. in the U.S.A. and other countries. The other company and product names mentioned herein are the trademarks and registered trademarks of each company. 16
6 What is Possible with BepopPC Capable of using a True Type Font to create a cut-out characters sticker. * Some True Type Fonts may not be able to cut properly due to the creating method of a font data. Capable of converting the data in the bitmap format (win.bmp format), such as a logo mark read with a scanner, etc., into a unique outline data format (extension pcf ), which can be output through Bepop, to register it as a symbol. Capable of inserting the data from a CSV format file. Capable of setting a serial number for an alphanumeric text. Provided with a Table frame function. Provided with a bordering function. Capable of freely editing the created outline data. A desired output result is obtained by eliminating unnecessary peaks and correcting a position. * The corners and curves may not be properly cut only by converting the data read from the scanner into the outline data. Capable of enclosing with a rectangular, oval, or polygonal frame line. The frame line width can be set in increments of 0.004 (0.1 mm). Provided with the example sentence data in the template function to enable quick creation by changing only characters based on the example sentences. Added 2-part tiled output. For arrange text features, provided with an arch text function to arrange the characters in the form of arch, and a line text function to gradually enlarge or contract characters. Capable of printing on Bepop sheets in up to 11 colors (transparent sheet: no-print setting). (Not so-called color print) Capable of pasting an image file of other application. Provided with monochromatic and color symbols. Use the registered graphic symbols and illustrations for your original signs. By using a laminate ribbon at the time of printing, a thin protective layer is created on the surface of the printed sheet, preventing label characters from being worn off. After pasting a laminate film to the surface of the printed sheet with a manual-pasting laminate film or an optional laminate kit, load the sheet in the printer again and cut the frame in line with the label shape. This allows you to create the laminate labels resistant to water, oil, chemicals and wearing off. 17
7 Important: Read before Installation 7.1 Environment of PCs Capable of Running with This Software Use the PC compliant with the following conditions. Other PCs cannot be assured of their operations. Common working conditions CPM-100G3 CPM-100HG3 DOS/V machines inscribed with logo, Designed for Windows * The following operating environment may differ depending on the restrictions of the operating system. Clock speed: Processor of 150 MHz or more Processor: Intel Pentium/Celeron series, AMD K6/Athlon/Duron family, or those compatible with them Memory: 64 MB or greater RAM HDD: Free capacity of 100 MB or more Should be able to use a CD-ROM. Required port USB port USB port/lan port Corresponding OS Windows 8/7/Vista/XP * Vista/XP supports only the 32-bit version. Precautions for corresponding * The corresponding OS is assured of its operations only for the pre-installed or clean OS installed machine. (Upgraded versions are beyond guarantee.) - The preinstalled machine refers to a PC shipped from the factory, with Windows installed in advance by a PC manufacturer. - The clean installed machine refers to an initialized and Windows installed PC compliant with each of the Windows operating conditions. In this case, it has to be confirmed that the PC s OS runs successfully. - This software does not support the 64-bit version of Windows Vista/XP, and Windows Server. 7.2 Precautions for Installation There are the following restrictions and precautions for installing this software and the printer driver. OS Windows 8 Windows 7 Windows Vista Windows XP Professional Edition Home Edition Precautions/Restrictions To install, it is necessary to log in as an Administrator or a member of an Administrators group. Restart after installation. When logging in under multiple users, only the administrator should install, and the other users are requested to install after log-off. When installing into a PC connected to a network (in-house LAN/WAN, etc.), consult a network administrator. Install only the printer driver of the model used. Be sure to use an installer, which is activated with an included CD-ROM, to install or uninstall. 18
7.3 Restrictions and Other Precautions There are the following restrictions and precautions for functioning of this software and the printer driver. <1> Operational Restriction on Overwriting the File Restriction: The users other than the administrator are only allowed to overwrite the files created by them. Remedy: This is due to the OS specifications and same as other commercially available applications. Change a name to save. <2> Operational failure Restriction: If Printer Driver Property of the relevant model has been set to Send data directly to printer, the printer driver may not function properly, resulting in an error. Remedy: Select Printer Driver Property to open Details tab, and check in the boxes for Spool print document and print program fast and Send printer data to printer immediately. <3> Operational restriction on CPM-100G3/CPM-100HG3 colorful print function Restriction: If two or more users logged on, the CPM-100G3/CPM-100HG3 colorful print function does not work. (A ribbon change message appears in the unused user screen.) Remedy: If colorful print is desired, limit the number of log-in users to one. If multiple users logged in and executed colorful print, the problem cannot be solved, even if other users log off later. In this case, restart the PC. To install, follow the procedures described in the manual. (Use the installer in the included CD-ROM.) To upgrade from the old version, uninstall it as instructed in the manual, and then, reinstall it. * In this case, your created data is not deleted. The data created in the old version is available in the new version, but not vice versa. (Except symbol data) If this software is installed or uninstalled in a different manner from the procedures described in the manual, it may not run at all. In such case, contact the nearest dealers. Be sure to read the README file in the included CD-ROM, which contains the latest information of this machine and software. 19
8 Installation and Uninstallation 8.1 Setup Menu The Setup menu activated by the included CD-ROM has the following functions: Install BepopPC, and desired printer driver. Normally, select this button. Uninstallation of BepopPC is also done through this button. Install (or uninstall) only the printer driver used. Use this button when adding only the printer driver. Set up the IP address when using by LAN connection. This area displays a description of the button indicated by the cursor. Exit the Setup menu. [Important] When Upgrading When installing from this CD-ROM into the PC where BepopPC and the printer driver have been installed, be sure to uninstall the old-version BepopPC software and the printer driver, and then, reinstall them. Uninstall BepopPC software and the printer driver separately. See the following pages. Uninstalling BepopPC : Page 25 Uninstalling the Printer Driver : Page 27 20
8.2 Installing BepopPC Software Keep the Bepop machine switched off and the cable unconnected until instructed in the manual. 1 Prior to installing Bepop PC software, terminate other application software and resident-type software such as virus scan software. 2 Set the included CD-ROM in the PC. In case of Windows 7/Vista, click on Continue in the user account management screen. 3 The Bepop Setup menu appears. Click on [Set up of the BepopPC]. 6 Click on [Next]. 7 Confirm that a program folder is BepopPC, and click on [Next]. 4 Click on [Next]. 8 Click on [Install]. 5 Read the License Agreement and click on [Yes] if you agree. 21
9 Confirm that it is checked in the box for Installs the printer driver right away. and click on [Finish]. [Messages displayed in procedures below] Only when installed with Windows 7/Vista/XP, the following messages appear in the procedures below. Although following warning message is displayed, the product can be used without problems. Once the message appears, click on [Install this driver software anyway], [Continue Anyway] or [Yes]. * These message are omitted in the procedural description below. (Message displayed for Windows 7/Vista) 10 Click on [Installation of the driver]. (Message displayed for Windows XP) 11 Select the model from List of Models, and click on [Next]. Now, you are finished with installation. Let us start and run BepopPC. 22
For the USB Cable 12 Connect the USB cable, and then turn on the Bepop machine. 13 Check USB cable and click on the [Next] button. * Only selectable cables are displayed depending on the OS used, model connected, and PC used. 16 Check Yes. Restarts immediately and click on [Finish]. * If there is any application software left unterminated at the time of starting installation, click on [No], exit the application, and then, restart the PC. 14 Click on [Install]. * The screen shows that the USB cable has been selected for the Bepop machine. 17 Restart the PC. You are finished with installation. * BepopPC and the Bepop machine operate successfully only after restarting the PC. Be sure to restart it. 15 Installation of the driver and port monitor starts automatically. * No reply may be displayed. Wait for some time. 23
For the LAN Cable 12 Check LAN cable and click on the [Next] button. * Only selectable cables are displayed depending on the OS used, model connected, and PC used. 15 Set a port name and an IP address for the PC side. Input the port name and IP address, and click on [OK]. * For the IP address you want to use, inquire a network administrator. * The IP address to be input has to be consistent with the upper 9 digits of the IP address (three 3-digit divisions) of the PC used. For the last 3 digits, assign an unused number not duplicating other connected device. * When using multiple main bodies, set different port names and IP addresses. 13 Click on [Install]. * The screen shows that the Bepop machine has been selected. 16 Check Yes. Restarts immediately and click on [Finish]. * If there is any application software left unterminated at the time of starting installation, click on [No], exit the application, and then, restart the PC. 14 Installation of the driver and port monitor starts automatically. * No reply may be displayed. Wait for some time. 17 Restart the PC. * BepopPC and the Bepop machine operate successfully only after restarting the PC. Be sure to restart it. 18 It is necessary to set the IP address of the printer body. Set it according to 9 Setting the IP Address of the CPM-100HG3 (Page 29). 24
8.3 Uninstalling BepopPC To uninstall BepopPC software, such as upgrading from the old version, follow the procedure below: 1 Prior to installing Bepop PC software, terminate other application software and resident-type software such as virus scan software. 2 Set the included CD-ROM in the PC. In case of Windows 7/Vista, click on Continue in the user account management screen. 3 The BepopPC Setup menu appears. Click on [Set up of the BepopPC]. 5 Uninstallation of BepopPC starts. 6 Click on [Finish]. 4 Click on [OK]. 25
8.4 Installing only the Printer Driver To install only the printer driver for Bepop, be sure to follow the procedure below: 1 Prior to installing Bepop PC software, terminate other application software and resident-type software such as virus scan software. 2 Set the included CD-ROM in the PC. In case of Windows 7/Vista, click on Continue in the user account management screen. 3 The BepopPC Setup menu appears. Click on [Set up only the printer driver]. [Messages displayed in procedures below] When installed with Windows 7/Vista/XP, the following messages appear in the procedures below. Although the following warning message is displayed, our product can be used without problems. Once the message appears, click on [Install this driver software anyway], [Continue Anyway] or [Yes]. These message are omitted in the procedural description below. (Message displayed for Windows 7/Vista) (Message displayed for Windows XP) 4 Click on [Installation of the driver]. 5 Select the model from the list of models and click on [Next]. For the subsequent procedure, follow either For the USB Cable on Page 23 or For the LAN Cable on Page 24 to install. 26
8.5 Uninstalling the Printer Driver To uninstall the printer driver, be sure to follow the procedure below. [Precautions] If Bepop has made output even once after starting the PC, the printer driver may not be uninstalled. Prior to uninstalling it, restart the PC. If uninstallation is implemented in other way, the system information saved in the PC is not deleted, possibly having an effect on next installation. 1 Set the included CD-ROM in the PC. 2 The BepopPC Setup menu appears. Click on [Set up only the printer driver]. 4 Select the Bepop machine to be uninstalled and click on [Uninstall]. 5 Check Yes. Restarts immediately and click on [Finish]. 3 Click on [Uninstallation of the driver]. 6 Restarting the PC finishes the uninstallation procedure. * After uninstallation, be sure to restart the PC. 27
9 Setting the IP Address of the CPM-100HG3 LAN connection is available for the CPM-100HG3. When using by LAN connection, set the IP address. 9.1 Restrictions for LAN Connection When using the CPM-100HG3 by LAN connection, consult the network administrator at the time of installation into the PC. Requests to the network administrator The CPM-100HG3 can be used by connecting it to the LAN. Install as follows. The following lists the IP address, etc. of the CPM-100HG3 upon shipment from the factory. This software does not support automatic acquisition of DHCP and management by SNMP. An installer cannot be used to implement coexistent installation with the CPM-100HG3 printer driver installed as a local printer by USB connection. In LAN connection, the PC and this machine can be directly connected by using a crossover cable. Setting item Value upon shipment IP address 192.168.11.1 Subnet mask 255.255.255.0 Default gateway 192.168.0.1 * The following IP addresses cannot be set. (1) 0. 0. 0. 0 (all 0) (2) 255. 255. 255. 255 (all 255) (3) 127. xxx. xxx. xxx (loopback address group) (4) xxx. xxx. xxx. 255 (subnet broadcast) To change the settings of the CPM-100HG3, see 9.2 Setting the IP Address of the CPM-100HG3. To install and use, it is necessary to log in as an administrator or a member of an Administrators group. Restart after installation. When you have logged in as multiple users, only the administrator should be allowed to do so. The other users are requested to install after logging off. 28
9.2 Setting the IP Address of the CPM-100HG3 * To set the IP address of the CPM-100HG3, connect the main body and PC with a USB cable. 1 Set the included CD-ROM in the PC. 2 The BepopPC Setup menu appears. Click on [IP Address Settings]. 4 Input the IP address and click on [Registration]. Next, clicking on [End] completes setting the IP address of the CPM-100HG3. For the IP address, input the address which has been set at the time of installing the printer driver. 3 The IP address setting tool for the CPM-100HG3 appears. Turn on the CPM-100HG3, connect it with the USB cable, and select the model you want to set. * Checking in the box for [Detailed Settings] allows you to alter the settings of the subnet mask and default gateway. * An initial IP address value appears in the screen. * Clicking on [Current Settings] allows you to check the IP address of the currently connected model. Now, you are finished with setting the IP address of the CPM-100HG3. 29
10 Usage of BepopPC (1): Input and Output of Characters For details of usage, see the Help function of this software. The following description shows an input example with the printing mode. If selecting the cutting mode, the characters are displays with out-line style, and not display with a color pallet and color symbols. 10.1 Inputting the Characters 1 Start BepopPC. 2 The Layoutt screen appears initially. 4 Input the characters into the Input text. Set other items such as a font. 3 Click on to select a text box, and drag an area where you want to draw the characters. The Textbox Properties window is opened. 5 Click on the [OK] button to lay out the input characters in the editing screen. Only True Type fonts are available. * For some True Type fonts, cutting may not be properly done, due to the font data structure. When using this machine with a personal computer, available editing software is only this BepopPC software. Other application software does not assure proper operation. 30
10.2 Outputting to Bepop 1 Set a sheet in this machine. 2 Click on [ ]. 3 Click on the [Start print] button. 4 Output starts. After initial operation (feeds the sheet by about 7.625 (19 cm) and returns), the machine performs printing, and cutting later. 10.3 Checking the Remaining Sheet Length The remaining length of the sheet loaded into the CPM-100G3/CPM-100HG3 can be checked with the status monitor of the CPM-100G3/CPM-100HG3. This function can be conveniently used for checking beforehand if the sheet is long enough for output length, and replenishing and managing the sheet. 1 Double-click on an icon [ ] located at the lower right part of the PC to display the status monitor. 2 Click on the [Acquire Remaining Sheet Length] button. Feed the sheet and acquire the remaining sheet length. 3 The approximate remaining sheet length is displayed. When setting a sheet, you can feed/return it with Feed key. CPM-100G3/CPM-100HG3: Feed key on the side of the machine If you click on the [Properties] button in 10.2 Step 2 above, you can make detailed settings related to output. To cancel output halfway, click the [Cancel Print] button of the status monitor, or turn off the CPM-100G3/CPM-100HG3, click on the [Cancel Print] button of the status monitor to delete a print job, and turn on the power again. The remaining sheet length may be displayed different from the actual length by 15 to 30 cm, depending on the remaining meter value and sheet loading condition. Once the sheet is separated from the roll, the remaining sheet length is not correctly displayed. Be sure to use the specified sheet for the CPM-100G3/CPM-100HG3. 31
11 Usage of BepopPC (2): Import of Logo or Mark 11.1 Reading the Logo or Mark from the Scanner 1 Start BepopPC. 2 Click on the [OK] button in the Setup sheet screen. 3 Click on the [ ] button. BepopScan (Edit symbol screen) starts. * You can also operate by selecting File Edit symbol 4 Open File Select Scanner. 9 Click on the [ ] button and drag a line you want to make horizontal to correct the tilt of the read logo. 10 Click on the [ ] button to outline it. * The graphic data is converted into the data for Bepop. 5 Select Scanner software you want to use. 6 Click on the [ ] button to start selected scanner readiing software. 7 Place a logo or mark on the scanner to read it. * For the scanner operating methods, see the instruction manual for the scanner. 8 Once the scanner finished reading, a read logo or mark appears in gray in the Edit symbol screen. 11 Select File Exit. Select Yes to save the original data (bitmap data) imported from the scanner. Only the scanners compliant with the TWAIN Standards are available. Once Select scanner is selected in Step 3, you do not need to select it thereafter. For the methods to operate the scanner and scanner reading software, see the instruction manual for the scanner. The suitable logos or marks are as follows: The maximum readable logo or mark is bitmap data up to A4 size. Use the logo or mark which has a clear graphic symbol desired to be read. <Black and white binary value or line-work> (The data with a photo or a gradational representation may not be converted as you expect.) Only a necessary portion is read by scanner reading software. The JPEG data cannot be clearly outlined because its image is small. (To use it, enlarge it by other image editing software.) 32
12 Select a location to save, name a file, and click on the [Save] button. 14 Select a group name, name a file, and click on the [Save] button. 13 Click on [Yes] to save the outlined data. 15 Click on the [Yes] button to paste to the editing screen. 16 The symbol data is laid out in the editing screen. 33
11.2 Calling the Saved Symbol (When Using for BepopPC) 1 Select Object Insert Symbol. 3 Click on the [Insert Symbol] button or double-click on the image. It is laid out in the editing screen. 2 Select a group name and click on a file name. A symbol image appears on the right. 34
12 Troubleshooting 1. Troubles Related to Installation of the Printer Driver This software does not support the 64-bit version of Windows Vista which displays a message Incorrect GRPSSUP.DLL and fails to install the printer driver when you try to install it. Use with the 32-bit version. 3 Check that a parallel cable has been selected, and click on [Next]. When the printer driver cannot be installed, displaying a message Failed to install the printer driver. ; 1 Restart the PC. 2 Uninstall the printer driver according to 8.5 Uninstalling the Printer Driver. 3 Restart the PC. 4 If antivirus software is working, terminate it. 5 Reinstall according to 8.4 Installing only the Printer Driver. 4 Click on [Install]. When the printer driver can be neither uninstalled nor installed (when a print job is remaining); 1 Select Start to display Printers and Faxes and double-click on the icon of MAX CPM. 2 If there still remains a document, select Printer -> Cancel All Documents. 3 Uninstall again. When the printer driver can be neither uninstalled nor installed (when no print job is remaining); 1 Proceed to model selection according to 8.4 Installing only the Printer Driver. 2 Holding down the Shift and L keys together, click on [Next]. 5 Check Yes. Restarts immediately and click on [Finish]. 6 Restart. 7 Uninstall the printer driver according to 8.5 Uninstalling the Printer Driver. 8 Restart. 9 If antivirus software is working, terminate it. 10 Install the printer driver again according to 8.4 Installing only the Printer Driver. 35
2. When printing fails, displaying no status monitor; The printer driver has been successfully installed, but the status monitor (a window to display a remaining ink quantity and the printer status) does not appear at the time of printing. An icon for the standard printer is displayed on the task bar (normally icons at the lower right of the screen), but the one for the CPM is not. 4 Install the status monitor manually. Select Start -> Run. (Icon for the CPMG3: ) Cause: This is because the status monitor has not started or installation of the status motor fails, which is implemented simultaneously while installing the printer driver. A possible cause is an operational effect of virus scan software. File copying from the CD has been completed. Remedy 1 Checking the symptom Select Start -> Control Panel -> ( Performance and Maintenance ) -> Administrative Tools -> Services to open a service window. * A parenthesized item applies when the control panel is of category display. Check that the following is indicated in the name field. (For the CPM-100HG3) MAX CPM-100HG3 Option UI Manager (For the CPM-100G3) MAX CPM-100G3 Option UI Manager As mentioned above, input the following in the name field: For the CPM-100HG3: MCP1H3OS -INSTALL For the CPM100G3: MCP1_3OS -INSTALL (There is a one-byte space before -. Input all the characters in one byte.) And click on the OK button. The status monitor is installed. * If an error (No file) is displayed, it is likely that there is an input error in the name field. 5 Checking method Check that the following is included in the indicated service in 1. Checking the symptom: For the CPM-100HG3: MAX CPM-100HG3 Option UI Manager For the CPM-100G3: MAX CPM-100G3 Option UI Manager If no name is indicated, this symptom applies. * If the name is indicated, check if the status is Start. In case of Stop, right-click on Start. 2 Check that if you have logged in with administrator authority. 3 Check if antivirus software (Virus Buster, etc.) is working or not. If working, terminate it. (Stopping is not enough. Be sure to terminate it.) If Status = Start and Type of Startup = Auto, installation of the status monitor is completed. (If it is manually installed with the service window left opened, check after updating the display.) If nothing is displayed now, repeat Steps 2 and 3 after restarting, and uninstall the printer driver. After restarting, repeat Steps 2 and 3, and implement regular installation. If regular installation fails, implement manual installation as described in 4. 6 After installation is completed, restart. 36
3. Other Troubles The printer cannot be recognized by LAN connection. Check if the IP address of the printer main body has been set. The IP address of the PC port is set in installing the printer driver. It is also necessary to set the IP address for the printer main body. Connect with the USB cable and set the IP address, using the IP address setting tool. For details, see 9. Setting the IP Address of the CPM-100HG3 (Page 29). 37
38
39 4010541