SC 7300

Transcription

1 PARTS BOOK SC 7300 Cylinder Bed, Inter Lock Chine Stitch Machine SUNSTAR MACHINERY CO., LTD. PME

2 Information A. Parts Book 구성 Structure of Part Book : 관계별고유코드 Unique code by mechanism 2: 관계별고유명칭 Unique name by mechanism 3: 관계도 Explode view 4Ref.No: 파트별고유식별번호 Unique identification number by part 5Parts No.: 고유제품코드 Unique Product code Ex) 구분 Code Category 구부품 Old part C-1230 신부품 New Part AS GP EP Note: 공지사항표기및메모 Refers to notice and memo 7품명 : 파트의고유품명 Name of Part:Unique name of parts 8Q ty : 파트의수량 The number of parts 9Assembly no.: 조 ( 組 ) 파트의식별번호 Unique identification number by set part 비고 remarks 조 ( 組 ) 파트 Set parts 기구적파트 Instrumental parts 전기적파트 Electrical parts

3 Warning 1. 조에속한파트는개별조립시제품의파손또는재봉불량이발생될수있어해당파트에대한주문시에는조품목으로만구입이가능합니다. 2. 본책자는 Parts Book으로제작되었으므로매뉴얼로사용불가합니다. 3. 사전예고없이사양이변경될수도있습니다. 1. The parts classified as ass y items may cause damage to the machine or bad sewing when they are separately assembled. Hence, when they are ordered, they can be purchased as ass y items only. 2. This is a parts book. It cannot be used as a manual. 3. Parts are Subject to change in Design Without Prior Notice.

4 Material Main Motor Shape of Stitch Plate None Standard C Fortuna Ⅳ Motor G Standard H Heavy Material N Fortuna Ⅲ Motor L For long stitch (longer than 2.5mm) M Clutch Motor S For short stitch (shorter than 1.8mm) Bed Type & No. of Needle 7300 Cylinder Bed-3Needle 7200 Cylinder Bed-2Needle Symbol of Series Sunstar Chine Stitch M/C Needle Space mm mm mm mm mm MODEL SC 7300H/C SPEC. 156G DEVICE UT-A/ / Attachment (Option) Top Cover Thread 0 Without Top Cover Thread 1 With Top Cover Thread CO HE WK TL Covering guide Hemming guide Walking presser foot See through light for hemming Device UT-A Lower Thread Trimming(Air Pressure 2) UT-B Lower Thread Trimming(Air Pressure 3) ST-C Upper Thread Trimming(Cylinder Bed)(Option) UT-E Lower Thread Trimmer(Electronic)(Cylinder Bed)(option) ST-F Top Cover Thread Trimmer(Electronic) SL Compact spot light TC Needle thread clamp TF-U Upper tape supplying device ETF-U Upper elastic tape supplying device PL-C Puller device / for cylinder bed WT-E Wiper device(electronic) FL-E Foot lifter(electronic) MPL-C Mechanical puller device / for cylinder bed

5 Class No. Main Motor Shape of Stitch Plate 00 Standard C Fortuna Ⅳ Motor G Standard 01 With Leftend Fabric Trimmer N Fortuna Ⅲ Motor L For long stitch (longer than 2.5mm) S For short stitch (shorter than 1.8mm) Bed Type & No. of Needle 73 Cylinder Bed-3Needle Needle Space 72 Cylinder Bed-2Needle mm mm Symbol of Series mm Sunstar mm Chine Stitch M/C mm MODEL SC 7300/C SPEC. 156G DEVICE UT-B+S/ / Attachment (Option) Top Cover Thread 0 Without Top Cover Thread 1 With Top Cover Thread Device UT-A+S Lower Thread Trimming(Air Pressure 2) UT-B+S Lower Thread Trimming(Air Pressure 3) WK AL EL SL TC Walking presser foot(hemming) Attaching guide for elastic lace See through light for hemming Compact spot light Needle thread clamp ST-C Upper Thread Trimming(Cylinder Bed)(Option)

6 CONTENTS 목차 I. SC 7300 A Machine Body Mechanism 두부외장관계 8 B Thread Guide, Tension Adjusting Mechanism 실안내및실조절관계 12 C Lower Shaft Mechanism 하축관계 16 D Upper Shaft Mechanism 상축관계 18 E Needle Bar Mechanism 바늘대관계 22 F Presser Foot Mechanism 누름대관계 24 G Spreader Mechanism 스프레더관계 28 H Looper Driving Mechanism 루퍼구동관계 30 I Feed Driving Control Mechanism 피이드조절관계 32 J Feed Driving Mechanism 피이드구동관계 34 K Lubrication Mechanism 급유관계 38 L Thread Stand Mechanism 실패꽂이관계 40 M Accessories Mechanism 액세서리관계 42 N Thread Trimmer Mechanism 1 사절관계-1 44 Thread Trimmer Mechanism 2 O 사절관계-2 46 Thread Trimmer Mechanism 3 P 사절관계-3 48 Thread Trimmer Mechanism 4 Q 사절관계-4 50 Thread Trimmer Mechanism 5 R 사절관계-5 52 S Ⅱ. SC 7310 Compact Motor Mechanism 소형모터관계 54 T1 Machine Body Mechanism-SC 7310 외장관계-SC T2 Presser Bar, Needle Bar, Feed Driving and Pneumatic Mechanism SC 7310 누름대, 바늘대, 피드구동, 공압관계 SC T3 Left Fabric Trimmer Mechanism-SC 7310 좌메스구동관계-SC T4 Suction Mechanism-SC 7310 흡입관계-SC

7 Ⅲ. Option Part 옵션파트 U1 Top Cover Thread Trimmer Mechanism 장식실사절관계 64 U2 Covering Mechanism 커버링관계 66 U3 Hemming Mechanism 헤밍관계 68 U4 Walking Foot Mechanism 워킹노루발관계 70 U5 Compact Spot Light Mechanism 상단램프관계 72 U6 See Through Light Mechanism 하단관계 74 U7 Needle Thread Clamp Mechanism 윗실잡이관계 76 U8-1 Mechanical Type Puller Mechanism 1 (SC 7300/MPL-C) 기계식풀러관계 1 (SC 7300/MPL-C) 78 U8-2 Mechanical Type Puller Mechanism 2 (SC 7300/MPL-C) 기계식풀러관계 2 (SC 7300/MPL-C) 80 U8-3 Mechanical Type Puller Mechanism 3 (SC 7300/MPL-C) 기계식풀러관계 3 (SC 7300/MPL-C) 82 V Gauge Parts 게이지 84 W Heavy Material Mechanism 후믈관계 (SC 7300H) 86 X 4Needle Gauge Mechanism 4본침게이지관계 88

8 A Machine Body Mechanism 외장관계 8

9 Ref. No. Parts No. Note Name of Parts 품 명 Q ty A-1 GP Arm 암 1 A-1-1 AS Arm&Bed Ass y 암 & 베드 ( 조 ) 1Set A-2 GP Bed 베드 1 A-3 GP Face Plate 면판 1 A-4 GP Gasket for Face Plate 면판가스켓 1 A SC-7113 Screw 면판고정나사 (M4 P0.7, L=12) 4 A R-7400 Rubber Cap for Face Plate 면판고무마개 1 A-7 GP Top Cover 윗뚜껑 1 A-8 GP Gasket for Top Cover 윗뚜껑가스켓 1 A-9 49A018S-811H Screw 윗뚜껑고정나사 (M4 P0.7, L=12) 7 A-10 GP Rubber Cap for Top Cover 윗뚜껑고무마개 1 A-11 GP Oil Window 유창 1 A R-7400 Rubber Cap for Arm(Top) 암상면고무마개 4 A R-640L Rubber Cap for Arm(Side) 암측면고무마개 1 A R-7400 Rubber Cap for Arm(Rear) 암후면고무마개 1 A-15 GP Needle Bar Cover 바늘대실안내커버 1 A-16 GP Guide for Needle Bar Cover 바늘대실안내커버가이드 1 A-17 SC Screw 바늘대실안내커버가이드고정나사 (M4 P0.7, L=7.8) 2 A-18 GP Rear Cover Gasket for Arm 암후면커버가스켓 1 A-19 GP Rear Cover for Arm 암후면커버 1 A SC-7113 Screw 암후면커버고정나사 (M4 P0.7, L=8) 6 A-21 GP Oil Seal 베드후면오일씰 1 A-22 GP Rear Rubber Cap of Bed 베드후면고무마개 1 A-23 GP Eye Guard Bracket A 안전판브라켓 A 1 A SC-7113 Screw 안전판브라켓 A 고정나사 (M4 P0.7, L=7.8) 1 A-25 GP Eye Guard Bracket B 안전판브라켓 B 1 A-26 WS Spring Washer for Eye Guard 안전판접시스프링와셔 1 A-27 SC Stud Screw for Eye Guard Bracket 안전판브라켓단나사 1 A-28 SN Nut 안전판브라켓고정너트 (11/64 n=40) 1 A-29 GP Eye Guard 안전판 1 A W-7500 Washer 안전판고정와셔 (d=3.2, D=6, t=0.5) 2 A-31 SC Screw 안전판고정나사 (1/8 n=44, L=6.5) 2 A-32 GP Gasket for Bed Cover(Left) Bracket 베드커버 ( 좌 ) 브라켓가스켓 1 A-33 GP Bracket for Bed Cover(Left) 베드커버 ( 좌 ) 브라켓 1 A-34 SC Screw 베드커버 ( 좌 ) 브라켓고정나사 (9/64 n=40, L=10) 4 A-35 GP Hinge for Bed Cover(Left) 베드커버 ( 좌 ) 힌지 1 A-36 PN Hinge Pin for Bed Cover(Left) 베드커버 ( 좌 ) 힌지핀 1 A-37 SC Screw 베드커버 ( 좌 ) 힌지고정나사 (M4 P0.7, L=5) 2 A-38 GP Bed Cover(Left) 베드커버 ( 좌 ) 1 A-39 GP Bed Cover(Left) Latch Spring 베드커버 ( 좌 ) 고정판스프링 1 A-40 SC Screw 베드커버 ( 좌 ) 고정판스프링나사 (M4 P0.7, L=5) 1 A-41 GP Rubber Cap for Bed Cover(Left) 베드커버 ( 좌 ) 고무마개 2 A-42 GP Extension Cover for Bed Cover(Left) 베드커버 ( 좌 ) 확장커버 1 A SC-7113 Screw 베드커버 ( 좌 ) 확장커버고정나사 (M4 P0.7, L=10) 2 A-44 GP Base for Needle Plate 침판부착베이스 1 A-45 SC Screw 침판부착베이스고정나사 (M4 P0.7, L=7.8) 2 A-46 GP Main Feed Regulating Push button 주이송조절버튼 1 A-47 GP Main Feed Regulating Push button Spring 주이송조절버튼스프링 1 A-48 RI Retaining Ring 주이송조절버튼고정링 ( 호칭경 4, E형 ) 1 A-49 GP Rod for Fixing Bed Cover(Left) 베드커버 ( 좌 ) 고정봉 1 A-50 AS Bracket for Oil Defender of Lower Shaft(Ass y) 하축오일막이브라켓 ( 조 ) 1 Set A-50-1 GP Bracket for Oil Defender of Lower Shaft 하축오일막이브라켓 1 A-50-2 GP Oil Defender of Lower Shaft 하축오일막이 1 A-51 SC Screw 하축오일막이브라켓 ( 조 ) 고정나사 (M4 P0.7, L=5) 2 A SSC-7113 Guide Block of Bed Slide Cover 베드슬라이드커버가이드블록 1 A SC-7113 Screw 베드슬라이드커버가이드블록고정나사 (M4 P0.7, L=8) 2 A-54 GP Rubber for Guide Block of Bed Slide Cover 베드슬라이드커버가이드블록고무 1 Assembly No. 9

10 A Machine Body Mechanism 외장관계 10

11 Ref. No. Parts No. Note Name of Parts 품 명 Q ty A-55 GP Bracket for Front Cover of Bed 베드전면커버브라켓 1 A-56 49A018S-81H Screw 베드전면커버브라켓고정나사 (M4 P0.7, L=12) 2 A-57 SC Hinge for Front Cover of Bed 베드전면커버힌지나사 2 A W-7507 Washer 베드전면커버힌지나사와셔 (d=5.2, D=10.5, t=1) 2 A-59 SC Screw 베드전면커버힌지나사고정나사 (M4 P0.7, L=4) 2 A-60 GP Bed Front Cover 베드전면커버 1 A-61 GP Extension Cover for Bed Front Cover 베드전면확장커버 1 A-62 WS Washer 베드전면확장커버고정와셔 ( 호칭경 4) 2 A-63 SC Screw 베드전면확장커버고정나사 (M4 P0.7, L=7.8) 2 A-64 SC Screw 베드전면커버스토퍼 (M4 P0.7, L=12) 1 A-65 SN Nut 베드전면커버스토퍼너트 (M4 P0.7) 1 A-66 GP Rod for Fixing Bed Cover(Front) 베드전면커버고정봉 1 A-67 GP Front Cover Latch Spring 베드전면커버고정판스프링 1 A-68 SC Screw 베드전면커버고정판스프링나사 (M4 P0.7, L=5) 1 A-69 GP Upper Plate(Front) of Bed 베드상면커버 ( 전 ) 1 A-70 SC Screw 베드상면커버 ( 전 ) 고정나사 A (M4 P0.7, L=12) 2 A-71 WS Washer 베드상면커버 ( 전 ) 고정나사와셔 ( 호칭경 4) 2 A-72 SC Screw 베드상면커버 ( 전 ) 고정나사 B (M3 P0.5, L=7) 1 A-73 SC Screw 베드상면커버 ( 전 ) 고정나사 C (M3 P0.5, L=5) 2 A-74 GP Looper Cam Cover (Front) 루퍼캠커버 ( 전 ) 1 A-75 SC Screw 루퍼캠커버 ( 전 ) 고정나사 (M4 P0.7, L=7.8) 2 A-76 GP Bed Cover Plate 베드덮개판 1 A-77 GP Gasket of Thread Trimming Base 사절베이스가스켓 1 A-78 SC Screw 베드덮개판고정나사 (M4 P0.7, L=8) 6 A-79 GP Upper Cover(R) of Bed 베드상면커버 ( 후 ) 1 A SC-7113 Screw 베드상면커버 ( 후 ) 고정나사 (M4 P0.7, L=12) 2 A-81 GP Slide Cover of Bed 베드슬라이드커버 1 A-82 GP Cover for Looper Cam Shaft 루퍼캠축커버 1 A-83 SC Screw 루퍼캠축커버고정나사 (M4 P0.7, L=7.8) 2 A-84 GP Cover for Oil Cooling Fan 오일냉각팬커버 1 A SC-4113 Screw 오일냉각팬커버고정나사 (M4 P0.7, L=7.8) 2 A-86 GP Bed Support 베드다리 4 A-87 GP Oil Pan 오일팬 1 A-88 SC Screw 오일팬고정나사 (M8 P1.25, L=20) 4 A-89 GP Oil Pan Gasket 오일팬가스켓 1 A-90 RI Drain Hole Seal 오일배출구고무링 1 A-91 SC Screw for Drain Hole 오일배출구나사 1 A-92 SC Screw 베드실린더부나사 (M6 P1.0, L=6) 1 A-93 GP Machine Number Plate 기번판 1 A P-7400 Pin for Machine Number Plate 기번판고정핀 2 A-95 GP Model Mark 모델마크 1 A P-7400 Pin for Model Mark 모델마크고정핀 2 A-97 PN Pin for Needle Plate Base 침판부착베이스결합핀 (3 9.4) 2 A-98 SC Screw 베드전면확장커버나사 (M5 P0.8, L=12) 2 A W-2516 Washer 베드전면확장커버와셔 2 A-100 GP Rubber for Upper Bed Cover(F) 베드상면커버 ( 전 ) 방진고무 1 A-101 SC Screw 바늘대실안내커버고정단나사 1 A-102 WS Spring Washer 바늘대실안내커버스프링와셔 1 A-103 SN Nut 바늘대실안내커버너트 1 A-104 GP CE Mark CE마크 1 A-105 GP Oil Seal 베드후면오일씰 1 Assembly No. 11

12 B Thread Guide, Tension Adjusting Mechanism 실안내및실조절장치관계

13 Ref. No. Parts No. Note Name of Parts 품 명 Q ty B-1 GP Thread Guide Plate 실안내판 1 B-2 SC Screw 실안내판고정나사 (M4 P0.7, L=7.8) 2 B-3 GP Bracket for Thread Eyelet Pipe 실안내파이프브라켓 2 B-5 SC Screw 실안내파이프브라켓고정나사 (9/64 n=40, L=6) 2 B-6 GP Thread Eyelet Pipe(R)(Non-Auto Trimmer) 실안내파이프 ( 우 )( 비사절 ) 1 B-7 AS Thread Tension Device(Ass y) 실조절장치 ( 조 )( 비사절 ) 1 Set B-7-1 GP Tension Post Support(Non-Auto Trimmer) 실조절장치베이스 ( 비사절 ) 1 B-7-2 GP Thread Guide A of Thread Tension Device 실조절장치실안내 A 5 B-7-3 GP Thread Guide B of Thread Tension Device 실조절장치실안내 B 5 B-7-4 GP Tension Disc Separator(Non-Auto Trimmer) 실조절장치접시열림판 ( 비사절 ) 1 B-7-5 GP Tension Post Ferrule 실조절장치포스트베이스 5 B-7-6 GP Tension Post 실조절장치포스트 5 B-7-7 GP Tension Disc 실조절장치접시 10 B AF-A001 Felt for Thread Tension Device 실조절장치펠트 5 B-7-9 GP Retainer for Thread Tension Spring Cap 실조절장치캡받침 5 B-7-10 GP Needle Thread Tension Spring 바늘실장력조절스프링 3 B-7-11 GP Top Cover Thread Tension Spring 장식실장력조절스프링 1 B-7-12 GP Looper Thread Tension Spring 루퍼실장력조절스프링 1 B-7-13 GP Stopper for Tension Spring 실조절장치스프링스토퍼 5 AS Thread Tension Spring Cap(Ass y) 실조절장치캡 ( 조 ) 5 Set B-7-14 GP Thread Tension Spring Cap 실조절장치캡 5 GP Bushing for Thread Tension Spring Cap 실조절장치캡붓싱 5 B-8 SC Screw 실조절장치베이스고정나사 (M4 P0.7, L=7.8) 2 B-9 GP Bracket for Oil Container 바늘실급유탱크브라켓 1 B-10 WS Washer 바늘실급유탱크브라켓와셔 ( 호칭경4) 1 B-11 SC Screw 바늘실급유탱크브라켓고정나사 (M4 P0.7, L=7.8) 1 B P-7500 Pin for Oil Container Bracket 바늘실급유탱크브라켓고정핀 1 B-13 GP Oil Tank 바늘실급유탱크 1 B-14 SC Screw 바늘실급유탱크고정나사 ( F형 ST2.2, L=5.5) 2 B-15 GP Oil Tank Cover 바늘실급유탱크커버 1 B P-1230 Spring Pin 바늘실급유탱크커버스프링핀 ( 호칭경 2, L=6) 2 B-17 GP Oil Tank Felt 바늘실급유탱크펠트 1 B-18 GP Needle Thread Eyelet 바늘실아일렛 3 B-19 SC-A Screw 바늘실아일렛고정나사 (3/32 n=56, L=3.8) 3 B-20 GP Needle Thread Guide 바늘실가이드 1 B S-9570 Screw 바늘실가이드고정나사 (M4 P0.7, L=10) 1 B-22 GP Cover for Needle Thread Take Up 바늘실실채기커버 1 B-23 SC Screw 바늘실실채기커버고정나사 (M4 P0.7, L=7) 1 B-24 AS Supplementary Tension Device for Needle Thread(Ass y) 바늘실보조장력조절장치 ( 조 ) 1 Set B-24-1 GP Needle Thread Retainer Support 바늘실보조장력조절브라켓 1 B-24-2 GP Needle Thread Retainer Disc Support 바늘실보조장력조절디스크지지판 1 B-24-3 GP Needle Thread Retainer Disc 바늘실보조장력조절디스크 1 B-24-4 GP Needle Thread Retainer Spring 바늘실보조장력조절스프링 1 B-24-5 SC Screw for Needle Thread Retainer 바늘실보조장력조절나사 1 B-25 SC Screw 바늘실보조장력조절브라켓고정나사 (M4 P0.7, L=7.8) 1 B-26 GP Top Cover Thread Eyelet(Right) 장식실아일렛 ( 우 ) 1 B-27 WS Washer 장식실아일렛 ( 우 ) 와셔 ( 호칭경4) 1 B-28 SC Screw 장식실아일렛 ( 우 ) 고정나사 (M4 P0.7, L=7.8) 1 B-29 GP Top Cover Thread Eyelet(Left) 장식실아일렛 ( 좌 ) 1 B-30 SC Screw 장식실아일렛 ( 좌 ) 고정나사 (M4 P0.7, L=7.8) 1 B-31 AS Supplementary Tension Device for Top Cover Thread(Ass y) 장식실보조장력조절장치 ( 조 ) 1 Set B-31-1 GP Top Cover Thread Guide 장식실가이드 1 B-31-2 GP Supplementary Guide of Top Cover Thread 장식실보조가이드 1 B-31-3 GP Post for Controlling Top Cover Thread Tension 장식실보조장력조절봉 1 B-31-4 GP Supplementary Tension Disc of Top Cover Thread 장식실보조장력조절접시 2 B-31-5 GP Supplementary Tension Spring for Top Cover Thread 장식실보조장력조절스프링 1 B-31-6 SN Nut for Top Cover Thread Tension 장식실보조장력조절너트 1 Assembly No. 13

14 B Thread Guide, Tension Adjusting Mechanism 실안내및실조절장치관계

15 Ref. No. Parts No. Note Name of Parts 품 명 Q ty B-32 SC Screw 장식실가이드고정나사 (M4 P0.7, L=7.8) 2 B-33 GP Bracket for Looper Cam 루퍼캠커버브라켓 1 B-34 SC Screw 루퍼캠커버브라켓고정나사 (M4 P0.7, L=7.8) 2 B-35 GP Stopper for Looper Thread Guide Bracket 루퍼실안내브라켓스토퍼 1 B-36 GP Looper Thread Sub Guide Bracket 루퍼실보조안내브라켓 1 B-37 GP Supplementary Tension Disc of Looper Thread 루퍼실보조장력조절접시 2 B-38 GP Supplementary Tension Spring of Looper Thread 루퍼실보조장력조절스프링 1 B-39 SC Screw for Looper Thread Sub Guide Bracket 루퍼실보조안내브라켓나사 1 B-40 GP Looper Cam Cover (Rear) 루퍼캠커버 ( 후 ) 1 B-41 SC Screw 루퍼캠커버 ( 후 ) 고정나사 (M4 P0.7, L=6) 2 B-42 GP Holder for Looper Thread Guide Bracket 루퍼실안내브라켓홀더 1 B-43 SC Screw 루퍼실안내브라켓홀더나사 (M3 P0.5, L=3.5) 2 B-44 GP Bracket for Looper Thread Guide 루퍼실안내브라켓 1 B-45 WS Spring Washer for Looper Thread Guide Bracket 루퍼실안내브라켓스프링와셔 1 B W-2700 Washer 루퍼실안내브라켓와셔 (d=5.3, D=10, t=1) 1 B-47 SC Stud for Looper Thread Guide Bracket 루퍼실안내브라켓단나사 1 B-48 GP Looper Thread Guide(Left) 루퍼실안내 ( 좌 ) 1 B-49 SC Screw 루퍼실안내고정나사 (M2.5 P0.45, L=3.7) 1 B-50 GP Looper Thread Guide(Middle) 루퍼실안내 ( 중 ) 1 B-51 SC Screw 루퍼실안내 ( 중 ) 고정나사 (M3 P0.5, L=5) 1 B-52 GP Looper Thread Guide(Right) 루퍼실안내 ( 우 ) 1 B-53 SC Screw 루퍼실안내 ( 우 ) 고정나사 (M2.5 P0.45, L=3.7) 1 B-54 GP Looper Thread Eyelet(Right) 루퍼실아일렛 ( 우 ) 1 B-55 SC Screw 루퍼실아일렛 ( 우 ) 고정나사 (M3 P0.5, L=3.5) 1 B-56 GP Looper Thread Eyelet(Left) 루퍼실아일렛 ( 중 ) 1 B-57 SC Screw 루퍼실아일렛 ( 중 ) 고정나사 (M3 P0.5, L=3.5) 1 B-58 GP Thread Eyelet Pipe(L)(Non-Auto Trimmer) 실안내파이프 ( 좌 )( 비사절 ) 1 Assembly No. 15

16 C Lower Shaft Mechanism 하축관계

17 Ref. No. Parts No. Note Name of Parts 품 명 Q ty C-1 GP Pulley for Lower Shaft 하축풀리 1 C-2 SC-A Screw 하축풀리고정나사 A(1/4 n=40 L=9) 1 C-3 SC-A Screw 하축풀리고정나사 B(1/4 n=40 L=6) 1 C-4 AS Oil Cooling Fan[Ass y] 오일냉각팬 ( 조 ) 1 Set C-4-1 GP Oil Cooling Fan 오일냉각팬 1 C-4-2 GP Bearing Bushing (R) for Lower Shaft 하축후베어링붓싱 1 C-5 SC Screw 오일냉각팬 ( 조 ) 고정나사 (M4 P0.7, L=4) 2 C-6 BR Ball Bearing 하축후베어링 (NTN 6205LB NR) 1 C-7 GP Timming Pulley for Lower Shaft 하축타이밍풀리 1 C-8 SC-A Screw 하축타이밍풀리고정나사 A(1/4 n=40 L=9) 1 C-9 SC-A Screw 하축타이밍풀리고정나사 B(1/4 n=40 L=6) 3 C-10 BR Ball Bearing 하축중베어링 (NTN 6204LB NR) 1 C-11 GP Lower Shaft(R) 하축 ( 후 ) 1 C-12 GP Driving Worm for Oil Pump 오일펌프구동웜 1 C-13 SC-A Screw 오일펌프구동웜고정나사 A(1/4 n=40 L=9) 2 C-14 SC-A Screw 오일펌프구동웜고정나사 B(1/4 n=40 L=6) 2 C-15 GP Balance for Lower Shaft 하축밸런스 1 C-16 SC Screw 하축밸런스고정나사 (M4 P0.7, L7.8) 2 C-17 BR Ball Bearing 하축전베어링 (NTN 6004Z; 2 O-ring) 1 C-18 AS Lower Shaft(M) [Ass y] 하축 ( 중 ) ( 조 ) 1 Set C-18-1 GP Lower Shaft(M) 하축 ( 중 ) 1 C P-1230 Spring Pin 스프링핀 ( 호칭경2, L=6) 1 C-19 SC-A Screw 하축 ( 중 ) ( 조 ) 고정나사 (1/4 n=40 L=4.5) 2 C-20 AS Lower Shaft(F) [Ass y] 하축 ( 전 ) ( 조 ) 1 Set C-20-1 GP Lower Shaft(F) 하축 ( 전 ) 1 C-20-2 GP Cap 하축 ( 전 ) 유심마개 1 C-20-3 GP Oil Wick 하축 ( 전 ) 유심 (Ø3, L=35) 1 C-20-4 GP Cap Felt 하축 ( 전 ) 마개휄트 4 C-21 GP Lower Shaft Front Bushing 하축전붓싱 1 C-22 GP Lower Shaft Rear Bushing 하축후붓싱 1 C-23 GP Oil Cap(S) 하축앞붓싱기름구멍마개 (S) 2 Assembly No. 17

18 D Upper Shaft Mechanism 상축관계

19 Ref. No. Parts No. Note Name of Parts 품 명 Q ty D S-9570 Screw 마개나사 (M6 P1.0, L=16) 1 D R-9570 Stopper for Upper Shaft Pulley 상축풀리마개 1 D-3 GP Upper Shaft Pulley 상축풀리 1 D B-2507 Magnet for Upper Shaft Pulley 상축풀리자석 2 D-5 SC-A Screw 상축풀리고정나사 (1/4 n=40 L=6) 2 D-6 BR Ball Bearing 상축후베어링 (NTN 6204LB NR) 1 D-7 GP Bearing Bushing (R) for Upper Shaft 상축후베어링붓싱 1 D-8 SC-A Screw 상축후베어링붓싱고정나사 A(1/4 n=40 L=9) 1 D-9 SC-A Screw 상축후베어링붓싱고정나사 B(1/4 n=40 L=6) 1 D-10 BE Timming Belt 상하축타이밍벨트 (Unitta 220 XL 075) 1 D-11 GP Timming Pulley for Upper Shaft 상축타이밍풀리 1 D-12 SC-A Screw 상축타이밍풀리고정나사 (1/4 n=40 L=6) 4 D-13 BE Timming Belt 루퍼캠구동타이밍벨트 (Unitta 384-3GT-8) 1 D-14 GP Driving Timming Pulley for Looper Cam 루퍼캠구동타이밍풀리 1 D-15 SC-A Screw 루퍼캠구동타이밍풀리고정나사 (1/4 n=40 L=6) 2 D-16 GP Upper Shaft (R) 상축 ( 후 ) 1 D-17 BR Ball Bearing 상축중베어링 (NTN 6204LB NR) 1 D-18 GP Bearing Bushing (M) for Upper Shaft 상축중베어링붓싱 1 D-19 SC-A Screw 상축중베어링붓싱고정나사 (1/4 n=40 L=6) 4 D-20 GP Balance for Upper Shaft 상축밸런스 1 D-21 SC Screw 상축밸런스고정나사 (M4 P0.7, L=7.8) 2 D-22 AS Upper Shaft (F) 상축 ( 전 ) 1 D-23 GP Oil Wick 상축 ( 전 ) 유심 (Ø3, L=85) 1 D-24 SC Screw 상축 ( 전 ) 유심마개나사 (M4 P0.7, L=4) 2 D-25 RI C-ring 상축 ( 전 ) C형멈춤링 ( 호칭경15) 1 D-26 BR Ball Bearing 상축전베어링 (NTN 6202LB) 2 D-27 GP Housing for Upper Shaft Bearing(F) 상축전베어링하우징 1 D-28 SC-A Screw 상축전베어링하우징고정나사 A(1/4 n=40 L=9) 1 D-29 SC-A Screw 상축전베어링하우징고정나사 B(1/4 n=40 L=4.5) 1 D-30-1 GP Link Cam(Needle Bar Stroke 31mm) 링크캠 ( 바늘대스트로크 31mm) 1 D-30-2 GP Link Cam(Needle Bar Stroke 33mm) 링크캠 ( 바늘대스트로크 33mm) 1 D-31 SC Screw 링크캠고정나사 (5/16 n=24 L=15.5) 2 D-32 BR Ball Bearing 루퍼캠축후베어링 (NTN 6202ZZ NR) 1 D-33 GP Bushing for Looper Cam Shaft Bearing 루퍼캠축후베어링붓싱 1 D-34 SC-A Screw 루퍼캠축베어링붓싱고정나사 A(1/4 n=40 L=9) 1 D-35 SC-A Screw 루퍼캠축베어링붓싱고정나사 B(1/4 n=40 L=6) 1 D-36 GP Looper Cam Shaft 루퍼캠축 1 D-37 GP Timming Pulley for Looper Cam Shaft 루퍼캠축타이밍풀리 1 D-38 SC-A Screw 루퍼캠축타이밍풀리고정나사 A(1/4 n=40 L=9) 1 D-39 SC-A Screw 루퍼캠축타이밍풀리고정나사 B(1/4 n=40 L=6) 1 D-40 BR Ball Bearing 루퍼캠축전베어링 (NTN 6002LB; 2 O-ring) 1 D-41 GP Bushing for Looper Cam Shaft Bearing 루퍼캠축전베어링붓싱 1 D-42 SC-A Screw 루퍼캠축베어링붓싱고정나사 (1/4 n=40 L=6) 2 D-43 AS Looper Cam [Ass y] 루퍼캠 ( 조 ) 1 Set D-43-1 GP Looper Cam 루퍼캠 2 D-43-2 CL Looper Cam Collar 루퍼캠카라 1 D-43-3 GP Looper Cam Spacer 루퍼캠스페이서 1 D-44 SC Screw 루퍼캠 ( 조 ) 고정나사 (M5 P0.8, L=5) 2 D-45 GP Connect Rod for Take Up Driver 실채기축구동레버연결로드 1 D-46 SC Screw 구동레버연결로드고정나사 A (11/64 n=32, L=13) 2 D-47 SC Screw 구동레버연결로드고정나사 B 2 D-48 GP Guide for Thread Take Up Driving Lever Shaft 실채기축구동레버안내 1 D-49 SC Screw 구동레버안내고정나사 (1/8 n=40, L=7.5) 2 D-50 GP Driving Shaft for Thread Takp Up 실채기구동축 1 D-51 GP Driving Lever for Thread Take Up Shaft 실채기축구동레버 1 D-52 SC Screw 실채기축구동레버고정나사 (M6 P1.0, L=14) 1 D-53 WS Washer 실채기축구동레버와셔 (d=5.5, D=15, t=1.8) 1 Assembly No. 19

20 D Upper Shaft Mechanism 상축관계

21 Ref. No. Parts No. Note Name of Parts 품 명 Q ty D-54 GP Spacer for Thread Take Up Driving Lever 실채기축구동레버스페이서 1 D S-9570 Screw 실채기구동축나사 (M5 P0.8, L=12) 1 D-56 GP Bracket for Thread Take Up Lever 실채기브라켓 1 D W-2700 Washer 실채기브라켓와셔 (D1=5.3, D2=10, t=1) 1 D-58 SC Screw 실채기브라켓고정나사 (M5 P0.8, L=15) 1 D-59 GP Needle Thread Take Up Lever 바늘실실채기 1 D-60 GP Top Cover Thread Takp Up Lever 장식실실채기 1 D-61 SC-A Screw 실채기고정나사 (9/64 n=40, L=7) 2 D-62 GP Oil Seal 실채기축전붓싱오일씰 1 D-63 GP Bushing(F) for Thread Take Up Shaft 실채기축전붓싱 1 D-64 GP Bushing(R) for Thread Take Up Shaft 실채기축후붓싱 1 Assembly No. 21

22 E Needle Bar Mechanism 바늘대관계 22

23 Ref. No. Parts No. Note Name of Parts 품 명 Q ty E-1 AS Needle Bar 바늘대 ( 조 ) 1 Set E-1-1 GP Needle Bar Insert Bushing 바늘대삽입붓싱 1 E-2 GP Needle Bar Take Up Thread 바늘대실채기 1 E-3 SC Needle Bar Take Up Thread Screw 바늘대실채기죔나사 1 E-4 GP Needle Bar Holder 바늘대잡이 1 E-5 SC Needle Bar Holder Screw 바늘대잡이죔나사 1 E-6 GP Needle Holder 바늘잡이 1 E-7 GP Top Cover Thread Eyelet 장식실아일렛 1 E-8 GP Needle 바늘 3 E-9 SC Needle Fix Screw 바늘고정나사 4 E-10 AS Needle Bar Connecting Rod(Ass y) 바늘대연결롯드 ( 조 ) 1 Set E-10-1 GP Needle Bar Connecting Rod 바늘대연결롯드 1 E-10-2 BR Roller Bearing 바늘대크랭크롤러베어링 ( 내경8, 외경11, 폭13) 1 E-10-3 PN Needle Bar Connecting Rod Pin 바늘대연결롯드핀 1 E-11 GP Needle Bar Connecting Rod Pin Oil Wick 바늘대연결롯드핀유심 1 E-12 WS Needle Bar Connecting Rod Washer 바늘대연결롯드와셔 1 E-13 GP Needle Bar Guide Block 바늘대안내블럭 1 E-14 GP Needle Bar Holder Guide 바늘대잡이안내 1 E-15 SC Needle Bar Holder Guide Screw 바늘대잡이안내고정나사 2 E-16 GP Needle Bar Holder Guide Sponge 바늘대잡이안내스폰지 1 E-17 GP Sponge Holder 스폰지잡이 1 E-18 AS Under Thread Oil Tank(Ass y) 밑실오일탱크 ( 조 ) 1 Set E-19 SC Under Thread Oil Tank Screw 밑실오일탱크죔나사 1 E-20 GP Silicon Lubrication Felt 실리콘급유휄트 1 E C-1230 Under Thread Oil Tank Hose 밑실오일탱크호스 Ø4 1 E-22 - Under Thread Oil Tank Oil Wick 밑실오일탱크유심 1 E-23 GP Silicon Lubrication Tank Nipple 실리콘급유탱크니플 1 E-24 GP Silicon Lubrication Tank 실리콘급유탱크 1 E-25 SC Silicon Lubrication Tank Screw 실리콘급유탱크죔나사 2 E-26 GP Needle Plate 침판 1 E-27 SC Needle Plate Screw 침판죔나사 2 E-28 GP Needle Bar Bushing(Upper) 바늘대상붓싱 1 E-29 GP Needle Bar Bushing(Lower) 바늘대하붓싱 1 E-30 GP Needle Bar Oil Wick Holder 바늘대유심잡이 1 E-31 GP Needle Bar Oil Wick 바늘대유심 1 E-32 GP Under Thread Oil Tank Cap 밑실실리콘급유탱크캡 1 E P-1230 Pin 밑실실리콘급유탱크캡핀 2 E S-106L Screw 바늘대연결롯드핀고정나사 1 E-35 GP Hose Holder 밑실오일탱크호스잡이 2 E-36 WS Washer 실린콘급유탱크와셔 2 Assembly No. 23

24 F Presser Foot Mechanism 누름대관계

25 Ref. No. Parts No. Note Name of Parts 품 명 Q ty F-1 AS Pressure Regulating Screw [Ass y] 누름대압력조절나사 ( 조 ) 1 Set F-1-1 SC Pressure Regulating Screw 누름대압력조절나사 1 F-1-2 GP Guide for Pressure Regulating Screw Spring 누름대압력조절나사스프링가이드 1 F-2 SN Nut for Pressure Regulating Screw 누름대압력조절나사너트 1 F-3 GP Presser Bar Spring (L) 누름대스프링 ( 대 ) 1 F-4 GP Holder for Presser Bar 누름대잡이 1 F-5 SC Screw 누름대잡이고정나사 (11/64 n=40 L=8) 1 F-6 GP Guide Block for Presser Bar Holder 누름대잡이안내블럭 1 F-7 SC Screw 누름대잡이안내블록고정나사 (11/64 n=40 L=16) 2 F-8 GP Presser Bar Spring (S) 누름대스프링 ( 소 ) 1 F-9 GP Presser Bar 누름대 1 F-10 GP Finger Guard 핑거가아드 1 F-11 SC Screw 핑거가아드고정나사 (M3 P0.5, L=5) 1 F-12 RI Oil Protector Ring for Presser Bar 누름대오일막이링 1 F-13 CL Collar For Presser Bar 누름대카라 1 F-14 SC Screw 누름대카라고정나사 (M4 P0.7, L=4) 2 F-15 AS Presser Foot (Ass y) 노루발 ( 조 ) 1 Set F-15-1 GP Presser Foot(Lower) 노루발 ( 하 ) 1 F-15-2 GP Presser Foot(Upper) 노루발 ( 상 ) 1 F-15-3 GP Sub-Presser Foot 보조노루발 2 F-15-4 GP Guide(L) for Sub-Presser Foot 보조노루발가이드 ( 좌 ) 1 F-15-5 GP Guide(R) for Sub-Presser Foot 보조노루발가이드 ( 우 ) 1 F-15-6 GP Presser Foot Spring (L) 노루발스프링 ( 좌 ) 1 F-15-7 GP Presser Foot Spring (R) 노루발스프링 ( 우 ) 1 F-15-8 GP Presser Foot Spring (Lower) 노루발스프링 ( 하 ) 1 F-15-9 SC Screw 보조노루발가이드나사 (3/32 n=56 L=5.5) 2 F PN Pin 노루발결합힌지핀 (Ø1.6, L=11) 1 F PN Spring Pin 노루발스프링핀 ( 호칭경1.6, L=20) 1 F-16 SC Screw 노루발 ( 조 ) 고정나사 (9/64 n=40 L=6) 1 F-17 GP Link for Presser Bar 누름대링크 1 F-18 GP Hinge Screw for Presser Bar Link 누름대링크고정단나사 2 F-19 GP Lifter Link Lever for Presser Bar 누름대올림링크레버 1 F-20 PN Spring Pin 무릎올림축스프링핀 ( 호칭경4, L=16) 1 F-21 GP Knee-Lifting Shaft 무릎올림축 1 F-22 GP Knee-Lifting Connecting Crank 무릎올림연결크랭크 1 F-23 SC Screw 무릎올림축연결크랭크고정나사 (M5 P0.8, L=15) 1 F-24 CL Collar for Knee-Lift Shaft 무릎올림축카라 1 F-25 SC Screw 무릎올림축카라고정나사 (11/64 n=40 L=5) 2 F-26 GP Spring for Knee-Lifting Connecting Crank 무릎올림연결크랭크스프링 1 F-27 GP Knee-Lifting Link 무릎올림링크 1 F-28 GP Knee-Lifting Lever(Non-auto. Trimmer) 무릎올림레버 ( 비사절용 ) 1 F-29 WS Washer for Knee-Lifting Lever 무릎올림레버와셔 1 F-30 SC Screw 무릎올림레버나사 (M6 P1.0, L=10) 1 F-31 GP Spring for Knee-Lifting Lever 무릎올림레버스프링 1 F-32 GP Knee-Lifting Hinge 무릎올림힌지 1 F-33 PN Stopper Pin for Knee-Lifting Lever Spring 무릎올림레버스프링스토퍼핀 1 F-34 GP Stopper for Knee-Lifter 무릎올림스토퍼 1 F-35 SC Screw 무릎올림스토퍼고정나사 (M6 P1.0, L=10) 2 F C-7507 Nut 무릎올림스토퍼너트 (M5 P0.8, H=4) 1 F-37 SC Screw 무릎올림스토퍼나사 (M5 P0.8, L=25(S=25)) 1 F-38 AS Tension Release Lever(Ass y)(non-auto. Trimmer) 실늦추기레버 ( 조 )( 비사절용 ) 1 F-38-1 GP Tension Release Lever(Non-auto. Trimmer) 실늦추기레버 ( 비사절 ) 1 F-38-2 PN Tension Release Lever(Non-auto. Trimmer) Pin 실늦추기레버 ( 비사절 ) 핀 1 F-39 SC Screw 실늦추기레버 ( 조 ) ( 비사절 ) 고정나사 (M4 P0.7, L=15) 1 F-40 GP Tension Release Shaft(Non-auto. Trimmer) 실늦추기축 ( 비사절 ) 1 F-41 GP Tension Release Spring(Non-auto. Trimmer) 실늦추기스프링 ( 비사절 ) 1 F-42 GP Bushing for Presser Bar 누름대붓싱 1 Assembly No. 25

26 F Presser Foot Mechanism 누름대관계

27 Ref. No. Parts No. Note Name of Parts 품 명 Q ty F-43 GP Oil Seal for Presser Bar Bushing 누름대붓싱오일씰 1 F-44 GP Bushing(F) for Presser Lifting Shaft 무릎올림축전붓싱 1 F-45 GP Bushing(R) for Presser Lifting Shaft 무릎올림축후붓싱 1 F-47 GP Rubber Cap 무릎올림축전붓싱고무마개 1 F-48 WS Washer 무릎올림축전붓싱고무와셔 1 Assembly No. 27

28 G Spreader Mechanism 스프레더관계

29 Ref. No. Parts No. Note Name of Parts 품 명 Q ty G-1 GP Spreader Driving Shaft 스프레더구동축 1 G-2 GP Bushing(F) for Spreader Driving Shaft 스프레더구동축전부싱 1 G-3 GP Bushing(R) for Spreader Drivng Shaft 스프레더구동축후부싱 1 G-4 CL Collar for Spreader Driving Shaft 스프레더구동축카라 1 G-5 SC Screw 스프레더구동축카라고정나사 (11/64 n=40, L=5) 2 G-6 GP Spreader Adjusting Lever 스프레더구동조절레버 1 G-7 SC Screw 스프레더구동조절레버고정나사 (M6 P1.0, L=14) 1 G-8 PN Pin for Adjusting Lever 스프레더구동조절레버핀 1 G-9 SC Screw 스프레더구동조절레버핀나사 (M4 P0.7, L=8) 1 G-10 WS Washer for Connecting Rod 스프레더구동커넥팅로드와셔 1 G-11 RI Retaining Ring 스프레더구동편심캠멈춤링 ( 호칭 22 C형 ) 1 G-12 AS Spreader Driver Eccentric(Ass y) 스프레더구동편심캠 ( 조 ) 1 Set G-12-1 GP Connecting Rod for Spreader Driving Shaft 스프레더구동커넥팅로드 1 G-12-2 BR Bearing 스프레더구동편심캠베어링 (KT222613) 1 G-12-3 GP Spreader Driving Eccentric 스프레더구동편심캠 1 G-13 SC-A Screw 스프레더구동편심캠고정나사 (1/4 n=40, L=6) 2 G-14 WS Washer for Adjusting Lever 스프레더구동조절레버와셔 1 G-15 01S127S-306H Nut 스프레더구동조절레버고정너트 ( M6 1.0) 1 G-16 GP Rocking Arm for Spreader Driving Shaft 스프레더구동축요동암 1 G-17 SC Screw 스프레더구동축요동암고정나사 (M6 P1.0, L=14) 1 G-18 PN Rocking for Spreader Shaft 스프레더축요동핀 1 G-19 GP Spreader Shaft 스프레더축 1 G-20 GP Felt for Spreader Shaft 스프레더축펠트 1 G-21 GP Bushing for Spreader Shaft 스프레더축부싱 1 G-22 GP Oil Seal for Spreader Shaft 스프레더축오일씰 1 G-23 WS Washer for Spreader Shaft 스프레더축와셔 1 G-24 CL Collar for Spreader Shaft 스프레더축카라 1 G-25 SC Screw 스프레더축카라고정나사 (M4 P0.7, L=4) 2 G-26 GP Spreader Holder 스프레더잡이 1 G SC-7113 Screw 스프레더잡이고정나사 (M4 P0.7, L=12) 1 G-28 GP Spreader 스프레더 1 G SC-7113 Screw 스프레더고정나사 (M4 P0.7, L=12) 1 Assembly No. 29

30 H Looper Driving Mechanism 루퍼구동관계 A

31 Ref. No. Parts No. Note Name of Parts 품 명 Q ty H-1 GP Looper 루퍼 1 H-2 SC Screw 루퍼고정나사 (9/64 n=40, L=6) 1 H-3 GP Looper Holder 루퍼잡이 1 H-4 GP Spacer for Looper Holder 루퍼잡이스페이서 1 H-5 SC Screw 루퍼잡이고정나사 (9/64 n=40, L=9) 1 H-6 GP Bushing for Looper Shaft 루퍼축부싱 1 H-7 GP Nipple for Looper Shaft Bushing 루퍼축부싱니플 1 H-8 SC Screw 루퍼축부싱고정나사 (M6 P1.0, L=8) 1 H-9 GP Eyelet for Looper Shaft Bushing 루퍼축부싱아일렛 1 H-10 SC Screw 루퍼축부싱아일렛고정나사 (M3 P0.5, L=3.5) 1 H-11 WS Washer for Looper Shaft Bushing 루퍼축부싱와셔 1 H-12 GP Looper Moving Base 루퍼운동베이스 1 H-13 GP Slide Block for Looper Moving Base 루퍼운동슬라이드블록 1 H-14 SC Screw 루퍼운동슬라이드블록고정나사 (M4 P0.7, L=6) 1 H-15 GP Slide Block Holder 루퍼운동슬라이드블록잡이 1 H-16 GP Slide Block Spacer 루퍼운동슬라이드블록잡이스페이서 1 H-17 WS Thrust Washer for Looper Shaft 루퍼축스러스트와셔 1 H-18 GP Seal Plug for Looper Shaft 루퍼축마개 1 H-19 GP Looper Shaft 루퍼축 1 H-20 SC Screw 루퍼축고정나사 (9/64 n=40, L=10) 1 H-21 GP Bushing for Looper Shaft Guide 루퍼축가이드부싱 1 H-22 GP Looper Shaft Guide 루퍼축가이드 1 H-23 SC Screw 루퍼축가이드고정나사 (M6 P1.0, L=8) 1 H-24 SC Screw for Looper Moving Base 루퍼운동베이스나사 1 H-25 WS Washer for Looper Moving Base 루퍼운동베이스와셔 2 H-26 AS Looper Rocker Adjusting Pin(Ass y) 루퍼요동조절핀 ( 조 ) 1 Set H-26-1 PN Looper Rocker Adjusting Pin 루퍼요동조절핀 1 H-26-2 PN Spring Pin 루퍼요동조절핀스프링핀 ( 호칭경 1.6, L=4) 1 H-27 AS Looper Rocker Regulating Eccentric(Ass y) 루퍼요동편심캠 ( 조 ) 1 Set H-27-1 GP Looper Rocker Regulating Eccentric 루퍼요동편심캠 1 H-27-2 BR Bearing 루퍼요동편심캠베어링 (KT263013) 1 H-27-3 GP Looper Rocker Connecting Rod 루퍼요동커넥팅로드 1 H-28 SC-A Screw 루퍼요동편심캠고정나사 (1/4 n=40, L=6) 1 H C-7507 Nut 루퍼운동베이스너트 (M5 P0.8) 1 H-30 AS Looper Driving Shaft(Ass y) 루퍼구동축 ( 조 ) 1 Set H-30-1 GP Looper Driving Shaft 루퍼구동축 1 H-30-2 GP Seal Plug for Looper Driving Shaft 루퍼구동축마개 2 H-31 WS Thrust Washer 루퍼구동축스러스트와셔 (GS1226) 3 H-32 BR Thrust Bearing 루퍼구동축스러스트베어링 (AXK1226) 2 H-33 AS Looper Rocking Lever(Ass y) 루퍼왕복구동레버 ( 조 ) 1 Set H-33-1 GP Looper Rocking Lever 루퍼왕복구동레버 1 H-33-2 GP Seal Plug for Looper Rocking Lever 루퍼왕복구동레버마개 1 H-34 SC Screw 루퍼왕복구동레버고정나사 (M8 P1.25, L=8) 2 H-35 GP Looper Connecting Rod 루퍼왕복구동커넥팅로드 1 H-36 SC Screw 루퍼왕복구동커넥팅로드고정나사 (11/64 n=32, L=14) 4 H-37 GP Guide for Looper Connecting Rod 루퍼왕복구동커넥팅로드가이드 1 H-38 SC Screw 루퍼왕복구동커넥팅로드가이드고정나사 (11/64 n=40, L=6.5) 2 H-39 GP Oil Splasher 오일분사판 1 H C-3710 Washer 오일분사판와셔 (d=4.8, D=8.4, t=0.8) 2 H-41 GP Looper Driving Arm 루퍼왕복구동암 1 H-42 SC Screw 루퍼왕복구동암고정나사 (M6 P1.0, L=14) 1 H-43 GP Bushing(F) for Looper Driving Shaft 루퍼구동축전붓싱 1 H-44 GP Oil Seal 루퍼구동축전붓싱오일씰 1 H-45 GP Bushing(R) for Looper Driving Shaft 루퍼구동축후붓싱 1 H-46 GP Oil Seal 루퍼구동축후붓싱오일씰 1 Assembly No. 31

32 I Feed Driving Control Mechanism 피드조절관계

33 Ref. No. Parts No. Note Name of Parts 품 명 Q ty I-1 AS Diffrential Feed Eccential Cam (Ass y) 차동이송편심캠 ( 조 ) 1 Set I-1-1 GP Eccential Cam For Diffrential Feed 차동이송편심캠 1 I A-5050 Bearing 차동이송편심캠베어링 (FWF ) 2 I-1-3 GP Connecting Rod for Feed Lift 들대연결로드 1 I-1-4 GP Connecting Rod for Differential Feed 차동이송연결로드 1 I-2 SC Screw 차동이송편심캠고정나사 2 I-3 RI C ring 차동이송편심캠 C링 ( 호칭경 25) 2 I-4 SC Screw 들대연결로드고정나사 (M4 0.7 L=5) 1 I-5 PN Pin for Differential Feed Connecting Rod 들대연결로드핀 1 I-6 GP Lever for Feed Lift 들대레버 1 I-7 SC-A Screw 들대레버고정나사 (1/4 n=40) 2 I-8 PN Pin for Differential Feed Connecting Rod 차동이송연결로드핀 2 I-9 GP Lever Link(L) for Differential Feed 차동이송레버링크 ( 대 ) 1 I-10 SC Screw 차동이송연결로드핀고정나사 (M4 0.7 L=5) 2 I-11 GP Lever Link(S) for Differential Feed 차동이송레버링크 ( 소 ) 1 I-12 PN Pin for Differential Feed Shaft Lever 차동이송축레버핀 1 I-13 WS Washer for Differential Feed Shaft Lever 차동이송축레버와셔 1 I-14 SC Screw 차동이송축레버핀고정나사 (M4 0.7 L=8) 1 I-15 GP Lever for Differential Feed Shaft 차동이송축레버 1 I-16 SC Screw 차동이송축레버고정나사 (M4 0.7 L=12) 1 I-17 AS Control Bracket for Differential Feed (Ass y) 차동이송조절브라켓 ( 조 ) 1 Set I-17-1 GP Control Bracket for Differential Feed 차동이송조절브라켓 1 I-17-2 PN Control Bracket Pin for Differential Feed 차동이송조절브라켓핀 1 I-18 PN Pin for Control Link 조절링크핀 1 I-19 SC-A Screw 차동이송조절브라켓고정나사A(1/4 n=40) 2 I-20 SC Screw 차동이송조절브라켓고정나사B(M4 0.7 L=5) 1 I-21 GP Guide for Differential Feed Connecting Rod 차동이송연결로드가이드 1 I-22 GP Spring for Differential Feed Control Bracket 차동이송조절브라켓스프링 1 I-23 PN Pin 차동이송연결브라켓스프링핀 1 I-24 GP Control Link for Differential Feed 차동이송조절링크 1 I-25 AS Control Nut for Differential Feed(Ass y) 차동이송조절너트 ( 조 ) 1 Set I-25-1 SN Control Nut for Differential Feed 차동이송조절너트 1 I-25-2 PN Spring Pin 차동이송조절너트스프링핀 ( 호칭경2, L=5) 1 I-26 GP Control Screw for Differential Feed 차동이송조절나사 1 I-27 PN Stopper Pin for Differential Feed Control 차동이송조절스토퍼핀 1 I-28 GP Control Knob for Differential Feed 차동이송조절손잡이 1 I-29 SC Screw 차동이송조절스토퍼핀고정나사 (M4 0.7 L=4) 1 I-30 GP Bushing Differential Feed Control Lever Shaft 차동이송조절레버축붓싱 1 I-31 RI O Ring (P16) 차동이송조절레버축붓싱 O링 1 I-32 RI Oil Seal 차동이송조절레버축붓싱오일씰 1 I-33 GP Shaft for Differential Feed Control Lever 차동이송조절레버축 1 I-34 GP Control Lever for Differential Feed 차동이송조절레버 1 I-35 SC Screw 차동이송조절레버죔나사 (M4 0.7 L=8) 1 I-36 WS Disc Spring Washer for Control Lever 조절레버접시스프링와셔 1 I-37 SN Nut for Control Lever 조절레버고정너트 1 I-38 SC Screw for Control Lever 조절레버고정나사 1 I-39 GP Stopper for Control Lever 조절레버스토퍼 1 I SW-1211 Washer 조절레버스토퍼와셔 1 I SW-3115 Spring Washer 조절레버스토퍼스프링와셔 1 I-42 SC Screw 조절레버스토퍼고정나사 (M5 0.8 L=8) 1 I-43 GP Spacer for Graduations 눈금판스페이서 2 I-44 SC Scerw for Graduations 눈금판고정나사 2 I-45 GP Differential Feed Graduations 차동이송눈금판 1 I-46 GP Bushing for Differential Feed Control 차동이송조절붓싱 1 I-47 RI O Ring (P12) 차동이송조절손잡이 O링 1 I-48 SC Screw 차동이송조절손잡이고정나사 (M4 0.7 L=4) 1 I-49 SC-A Screw 차동이송조절레버축붓싱고정나사 (1/4 n=40, L=4.5) 1 Assembly No. 33

34 J Feed Driving Mechanism 피드구동관계

35 Ref. No. Parts No. Note Name of Parts 품 명 Q ty J-1 AS Main Feed Bar (Ass y) 주톱니받침 ( 조 ) 1 set J-1-1 GP Main Feed Bar 주톱니받침 1 J-1-2 GP Feed Dog Guide 톱니가이드 1 J-2 GP Main Feed Dog 주톱니 1 J-3 SC-A Screw 주톱니죔나사 (9/64 n=40) 1 J-4 GP Feed Bar Guide ( R ) 톱니받침가이드 ( 우 ) 1 J-5 SC Screw 톱니받침가이드 ( 우 ) 고정나사 (M6 1, L=6) 1 J-6 GP Feed Bar Guide ( L ) 톱니받침가이드 ( 좌 ) 1 J-7 SC Screw 톱니받침가이드 ( 좌 ) 고정나사 (M6 1, L=6) 1 J-8 GP Feed Lift Block(Rear) 들대블럭 ( 후 ) 1 J-9 GP Main Feed Bar Connect Link 주톱니받침연결링크 1 J-10 PN Main Feed Bar Connect Link Pin 주톱니받침연결링크핀 1 J-11 SC Screw 연결핀고정나사 (M5 0.8, L=18) 1 J-12 AS Feed Cam (Ass y) 하피이드캠 ( 조 ) 1 Set J-12-1 GP Main Feed Eccentric 주이송편심기 1 J-12-2 SC Screw 편심기죔나사 (M3 0.5, L=8) 1 J-12-3 SC Screw 편심기고정나사 (M4 0.7, L=6) 2 J-12-4 SC Screw 주이송편심기고정나사 (M2 0.4, L=3.5) 1 J-12-5 GP Eccentric Slider 편심기슬라이더 1 J-12-6 PN Eccentric Slider Guide Pin 편심기슬라이더가이드핀 1 J-12-7 GP Feed Cam 하피이드캠 1 J-12-8 PN Feed Cam Stopper Pin 피이드캠스토퍼핀 1 J-12-9 GP Feed Cam Spring Plate 피이드캠스프링판 1 J GP Feed Cam Spring Presser Plate 피이드캠스프링압력판 1 J SC Screw 피이드캠스프링압력판나사 (M2 0.4) 2 J GP Feed Cam Regulate Plate 피이드캠조정판 1 J SC Screw 피이드캠조정판죔나사 (9/64 n=40) 1 J PN Spring Pin 피이드캠스프링압력판핀 ( 호칭경1.5, L=4) 1 J-13 AS Differential Feed Bar (Ass y) 차동이송톱니받침 ( 조 ) 1 Set J-13-1 GP Differential Feed Bar 차동이송톱니받침 1 J-13-2 GP Feed Dog Guide 톱니가이드 1 J-14 GP Differential Feed Dog 차동이송톱니 1 J-15 SC-A Screw 차동이송톱니죔나사 (9/64 n=40) 1 J-16 GP Feed Lift Block (F) 들대블럭 ( 전 ) 1 J-17 GP Feed Lift Shaft 들대 1 J-18 GP Oil Wick 들대유심 (Ø4 L=250) 1 J-19 GP Feed Lift Shaft Cap 들대캡 1 J-20 CL Feed Lift Shaft Collar 들대카라 2 J-21 SC-A Screw 들대카라고정나사 (1/4 n=40, L=4.5) 2 J-22 GP Differential Feed Shaft 차동이송축 1 J-23 GP Differential Feed Shaft Cap 차동이송축캡 1 J-24 PN Differential Feed Connection Pin 차동이송연결핀 1 J-25 GP Oil Wick 차동이송연결핀휄트 1 J-26 GP Differntial Feed Bar Connect Link 차동톱니받침연결링크 1 J-27 SC Oil Wick 차동이송연결핀고정나사 (M3 0.5, L=6) 1 J-28 SN Oscillation Adjusting Nut 진동조절편심너트 1 J-29 SC Oil Wick 연결핀고정나사 (M5 0.8, L=18) 1 J-30 GP Feed Bar Guide(Lower) 톱니받침가이드 ( 하 ) 1 J-31 SC Screw 톱니받침가이드 ( 하 ) 죔나사 (M4 0.7, L=11.8) 2 J-32 GP Needle Guard Eccentric Cam 바늘안내편심캠 1 J-33 SC-A Screw 바늘안내편심캠고정나사 (1/4 n=40, L=6) 2 J-34 GP Needle Guard Lever (F) 바늘안내레버 ( 전 ) 1 J-35 SC Screw 바늘안내레버 ( 전 ) 죔나사 (M3 P0.5, L=12.5) 1 J-36 GP Needle Guard Holder (F) 바늘안내잡이 ( 전 ) 1 J-37 SC Screw 바늘안내잡이 ( 전 ) 죔나사 (M3 0.5, L=6) 1 J-38 GP Needle Guard (F) 바늘안내 ( 전 ) 1 J-39 GP Needle Guard Lever (R) 바늘안내레버 ( 후 ) 1 Assembly No. 35

36 J Feed Driving Mechanism 피드구동관계

37 Ref. No. Parts No. Note Name of Parts 품 명 Q ty J-40 SC Screw 바늘안내레버 ( 후 ) 죔나사 (M3 P0.5, L=12.5) 1 J-41 GP Needle Guard Holder (R) 바늘안내잡이 ( 후 ) 1 J-42 GP Needle Guard (Rear) 바늘안내 ( 후 ) 1 J-43 SC Screw 바늘안내 ( 후 ) 죔나사 (M3 0.5, L=6) 1 J-44 GP Feed Lift Shaft Bushing(F) 들대전붓싱 1 J-45 GP Feed Lift Shaft Bushing(Rear) 들대후붓싱 1 J-46 GP Differential Feed Shaft Bushing(Rear) 차동이송축후붓싱 1 J-47 GP Differential Feed Shaft Bushing(F) 차동이송축전붓싱 1 J-48 GP Felt 들대휄트 1 J-49 GP Cover for Needle Guard Lever 바늘안내레버유방판 1 Assembly No. 37

38 K Lubrication Mechanism 급유관계

39 Ref. No. Parts No. Note Name of Parts 품 명 Q ty K-1 AS Oil Pump Ass y 오일펌프 ( 조 ) 1 Set K-2 22S026S-306H Oil Pump Bracket Screw 오일펌프브라켓죔나사 2 K-3 GP Oil Pump Driving Worm Gear 오일펌프구동웜기어 1 K-4 SC Oil Pump Worm Gear Screw 오일펌프웜기어고정나사 2 K C-5700 Oil Pump Nipple 오일펌프니플 2 K-6 GP Oil Hose Joint A 오일호스조인트A 2 K-7 GP Oil Hose Joint B 오일호스조인트B 3 K-8 SC Tube Connecting Screw 호스연결나사 4 K-10 SC Oil Lubricant Pipe Screw 오일급유파이프죔나사 1 K-11 GP Lower Shaft Lubricant Nipple 하축급유니플 1 K-12 AS Oil Suction Pipe Lower(Ass y) 오일환류파이프하 ( 조 ) 1 Set K-12-1 GP Oil Suction Pipe Lower 오일환류파이프하 1 K-12-2 GP Oil Pipe Holder 오일파이프잡이 1 K-13 SC Oil Suction Pipe Lower Screw 오일환류파이프하죔나사 1 K-14 GP Oil Suction Pipe Upper 오일환류파이프상 1 K-15 GP Oil Pipe Holder Rubber 오일파이프잡이고무 1 K-16 GP Arm Suction Pipe Felt 암환류파이프휄트 1 K-17 GP Oil Receiver Bracket 오일받이브라켓 1 K-18 GP Upper Shaft Oil Pipe 상축오일파이프 1 K-19 SN Upper Shaft Oil Pipe Nut 상축오일파이프너트 1 K-20 RI Upper Shaft Oil Pipe O Ring 상축오일파이프 O링 1 K-21 GP Upper Shaft Oil Bushing 상축오일붓싱 1 K-22 SC Oil Receiver Bracket Screw 오일받이브라켓고정나사 2 K-23 GP Oil Filter 오일필터 1 K-24 GP Oil Filter Bushing 오일필터붓싱 1 K-25 RI Oil Filter O Ring 오일필터 O 링 (P41) 1 K-26 GP Oil Filter Cover 오일필터커버 1 K-27 SC Oil Filter Cover Screw 오일필터커버죔나사 3 K-28 GP Oil Gauge 오일게이지 1 K-29 GP Bed Cover 베드커버 1 K-30 SC Bed Cover Screw 베드커버죔나사 3 K-31 GP Oil Net 오일망 1 K-32 RI Fixed Oil Net 오일망고정C링 1 K-33 GP Oil Hose Holder 오일호스잡이 1 K-34 SC Oil Hose Holder Screw 오일호스잡이죔나사 1 K-35 GP Oil Hose Holder(M) 오일호스잡이 ( 중 ) 10 K-36 GP Oil Hose Ø4 오일호스 Ø4 1 K-37 PN Spring Pin 오일펌프웜기어스프링핀 1 K M-3710 Felt 오일환류파이프 ( 하 ) 휄트 1 K-39 PN Spring Pin 오일환류파이프 ( 하 )( 조 ) 스프링핀 1 K-40 GP Oil Regulator Block B 오일조절기블럭 B 1 K-41 GP Nipple 니플 2 K R-1230 Rubber Cap 고무마개 1 K-43 GP Nipple 니플 2 K-44 PN Pin 핀 2 K-45 SC Screw 오일조정나사 1 K-46 RI O-Ring O-링 1 Assembly No. 39

40 L Thread Stand Mechanism 실패꽂이관계

41 Ref. No. Parts No. Note Name of Parts 품 명 Q ty L-1 AS Thread Stand(Ass y) 실패꽂이 ( 조 ) 1 Set L-2 GP Holder for Thread Guide Sub-Bar 실패꽂이보조가이드잡이 1 L-3 SC Screw 실패꽂이보조가이드잡이고정나사 A (M4 P0.7, L=20) 1 L SC-7113 Screw 실패꽂이보조가이드잡이고정나사 B (M4 P0.7, L=12) 1 L-5 SN Nut 실패꽂이보조가이드잡이고정너트 (M4 P0.7) 2 L-6 GP Thread Guide Sub-Bar 실패꽂이보조가이드 1 L-7 GP Holder for Thread Guide Bar 실패꽂이가이드잡이 1 L SC-7113 Screw 실패꽂이가이드잡이고정나사 (M4 P0.7, L=12) 2 L-9 SN Nut 실패꽂이가이드잡이고정너트 (M4 P0.7) 2 L-10 GP Thread Guide Bar 실패꽂이가이드 1 Assembly No. 41

42 M Accessories Mechanism 액세서리관계 42

43 Ref. No. Parts No. Note Name of Parts 품 명 Q ty M-1 GP Belt Cover (Upper) 벨트커버 ( 상 ) 1 M-2 SC Screw 벨트커버 ( 상 ) 고정나사 (M6 P1.0, L=48, s=12) 2 M-3 GP Belt Cover (Lower) 벨트커버 ( 하 ) 1 M S-3400 Taper Screw 벨트커버 ( 하 ) 고정나사 (Ø4.1 P1.8, L=19.7) 3 M-5 GP Oil Reservoir Rubber Cushion 오일팬고무받침 4 M-6 SC Screw for Oil Reservoir Rubber Cushion(L) 오일팬고무받침고정나사 ( 대 ) 4 M-7 WS Washer for Bed Support Bar 오일팬고무받침고정나사 ( 대 ) 와셔 ( 호칭8, 소형원 ) 8 M SW-4115 Spring Washer 오일팬고무받침고정나사 ( 대 ) 스프링와셔 ( 호칭8) 4 M-9 SN Nut 오일팬고무받침고정나사 ( 대 ) 너트 (M8 P1.25, H=5) 4 M-10 SC Screw for Oil Reservoir Rubber Cushion(S) 오일팬고무받침고정나사 ( 소 ) 4 M-11 GP Bed Support Bar 베드지지대 2 M-12 SC Screw 베드지지대고정나사 (M8 P1.25, L=45) 4 M-13 WS Washer for Bed Support Bar 베드지지대고정와셔 8 M-14 WS Rubber Washer for Bed Support Bar 베드지지대고무와셔 4 M-15 GP Cushion Rubber for Bed Support Bar 베드지지대쿠션고무 4 M-16 SN Nut for Bed Support Bar Cushion Rubber 베드지지대고정너트 4 M-17 GP Guide for Pedal Chain 발판체인안내 1 M-18 SC Screw 발판체인안내고정나사 (3/16 n=28 L=10) 2 M-19 AS Pedal for Presser Foot(Ass y/non-auto. Trimmer) 누름대올리기발판 ( 조 / 비사절용 ) 1 Set M-20 91S016S-306H Chain 체인 1 M-21 91S017S-306H S/Shape Hook S자고리 2 M C-1230 Accessory Bag 액세서리백 1 M C-1230 Screw Driver(L) 드라이버 ( 대 ) 1 M C-1230 Screw Driver(M) 드라이버 ( 중 ) 1 M C-1230 Screw Driver(S) 드라이버 ( 소 ) 1 M-26 GP Screw Driver for Needles 바늘드라이버 1 M C-2700 L-Type Hexagonal Wrench(2mm) L자렌치 (2mm) 1 M C-2700 L-Type Hexagonal Wrench(2.5mm) L자렌치 (2.5mm) 1 M C-2700 L-Type Hexagonal Wrench(3mm) L자렌치 (3mm) 1 M C-3800 L-Type Hexagonal Wrench(4mm) L자렌치 (4mm) 1 M C-1230 Oiler 오일주유통 1 M-32 GP Bottle of Oil 오일 1 M A-300G Thread Tweezers 핀셋 1 M-34 GP Needle 바늘 (UY 128 GAS #10) 5 M C-2700 Head Cover 미싱커버 1 M-36 GP Bed Support Bar(C Type) 베드지지대 (C타입내림테이블용 ) 1 Assembly No. 43

44 N Thread Trimmer Mechanism 1 사절관계

45 Ref. No. Parts No. Note Name of Parts 품 명 Q ty N-1 GP Knee-lifting Lever(Auto. Trimmer) 무릎올림레버 ( 사절용 ) 1 N-2 GP Tension Release Lever 실늦추기레버 1 N-3 SC Screw 실늦추기레버고정나사 (M4 P0.7, L=15) 1 N-4 05A039S-811H Air Tube 스피드콘트롤러에어튜브 (Ø4, L=150) 1 N-5 GP Bracket for Speed Controller 스피드콘트롤러브라켓 1 N-6 49A001S-811H Speed Controller 스피드콘트롤러 (AS 1000F) 1 N-7 SC Screw 스피드콘트롤러고정나사 (M3 P0.5, L=12.5) 2 N-8 05A039S-811H Air Tube 에어와이퍼에어튜브 (Ø4, L=150) 1 N-9 GP Support Plate for Air Wiper 에어와이퍼지지판 1 N-10 WS Washer for Air Wiper Support Plate 에어와이퍼지지판와셔 2 N SC-7113 Screw 에어와이퍼지지판고정나사 (M4 P0.7, L=8) 2 N-12 AS Air Wiper(Ass y) 에어와이퍼 ( 조 ) 1 Set N-12-1 GP Air Wiper Pipe 에어와이퍼파이프 1 N-12-2 GP Air Wiper Bracket 에어와이퍼브라켓 1 N-13 WS Washer for Air Wiper 에어와이퍼와셔 2 N SC-7113 Screw 에어와이퍼고정나사 (M4 P0.7, L=8) 2 N-15 GP Tension Release Shaft 실늦추기구동축 1 N-16 GP Thread Eyelet Pipe 실안내파이프 2 N-17 GP Guide for Thread Pull-off Bar 실늦추기봉가이드 1 N-18 SC Screw 실늦추기봉가이드고정나사 (M4 P0.7, L=4.8) 2 N-19 GP Thread Pull-off Bar 실늦추기봉 1 N-20 GP Swing-Proof Spring for Thread Pull-off Bar 실늦추기봉흔들림방지스프링 1 N-21 CL Collar for Thread Pull-off Bar 실늦추기봉카라 1 N-22 SC Screw 실늦추기봉카라고정나사 (9/64 n=40, L=4.5) 1 N-23 AS Thread Pull-off Hook Holder A (Ass y) 실늦추기고리잡이 A ( 조 ) 3 Set N-23-1 GP Thread Pull-off Hook Holder A 실늦추기고리잡이 A 3 N-23-2 GP Thread Pull-off Hook 실늦추기고리 3 N-24 AS Thread Pull-off Hook Holder B (Ass y) 실늦추기고리잡이 B ( 조 ) 2 Set N-24-1 GP Thread Pull-off Hook Holder B 실늦추기고리잡이 B 2 N-24-2 GP Thread Pull-off Hook 실늦추기고리 4 N-25 SC Screw 실늦추기고리잡이고정나사 (9/64 n=40, L=3) 5 N-26 GP Thread Pull-off Bar Holder 실늦추기봉잡이 1 N-27 SC Screw 실늦추기봉고정나사 (9/64 n=40, L=4.5) 1 N-28 GP Thread Pull-off Lever 실늦추기구동레버 1 N-29 RI Retaining Ring 실늦추기봉잡이고정멈춤링 ( 호칭경4 E형 ) 1 N-30 PN Roll Pin 실늦추기구동레버고정핀 ( 호칭경 4 Spring Pin, L=16) 1 N-31 GP Thread Pull-off Eccentric 실늦추기구동편심캠 1 N-32 GP Swing-Proof Spring for Tension Disc Separator 실조절장치접시열림판흔들림방지스프링 1 N-33 SC Screw 실늦추기구동편심캠고정나사 (9/64 n=40, L=13) 1 N-34 GP Tension Post Support 실조절장치베이스 1 N-35 GP Tension Disc Separator 실조절장치접시열림판 1 N-36 SC Screw 실조절장치베이스고정나사 (M4 P0.7, L=7.8) 2 N SE55 Syncro. Sensor 싱크로센서 1 N-38 SC Screw 싱크로고정나사 (M3 P0.5, L=7) 2 N-39 GP Sensor Bracket 싱크로브라켓 1 N SC-4113 Screw 싱크로브라켓고정나사 (M4 P0.7, L=8) 2 N-41 WS Washer 싱크로브라켓와셔 ( 호칭경4) 2 Assembly No. 45

46 O Thread Trimmer Mechanism 2 사절관계