Parts List

Size: px
Start display at page:

Download "Parts List"

Transcription

1 COP 1440 Drifter Parts for Atlas Copco Atlas Copco No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks set of nipple 1set *} front head dome nut 0.26kg washer 0.04kg screw connection plate 1.54kg cup seal nipple, 25mm 0.26kg side bolt 0.82kg cover, compl. 5kg *}.cover seal ring 0.06kg lock ring cylindrical pin **} o-ring shim, 0.10mm shim, 0.15mm shim, 0.3mm roller bearing 32018XQ 1.8kg side bolt shank adapter driver 1.66kg rotation chuck, compl. 4.44kg *}.rotation chuck bushing 0.18kg roller bearing 32016XQ 1.3kg gear housing, compl. 1 *}.gear housing plug lubricating nipple seal ring lock ring washer **} o-ring **} o-ring rotation chuck bushing 1.38kg shaft, compl. 2.1kg 27,29,30,31,26,32 set *}.shaft needle bearing 0.06kg washer 0.02kg needle bearing ERG Korea CO., Ltd. 1 / 6

2 sleeve 0.2kg cup seal guide sleeve gear 0.64kg o-ring damping piston 41 B} set of seals liner o-ring o-ring lock ring bushing 0.08kg 47 B} set of seals intermediate part, compl. 48 *}.intermediate part thread insert thread insert nozzle connection plate screw **} o-ring high pressure accumulator compl low pressure accumulator compl seal housing, compl. 0.40kg 56 *}.seal housing set of seals **}.o-ring **} o-ring piston guide, front KG **} o-ring valve piston 0.38kg valve cover, left valve cover, right 65 F screw screw seal washer dome nut regulating plug cylinder, compl. 71 *}.cylinder pipe plug seal washer thread insert thread insert ERG Korea CO., Ltd. 2 / 6

3 plug guide stud coupling 0.38kg circlip ,81 hydraulic motor 10.5kg nut **} o-ring piston kg **} o-ring piston guide, rear seal housing, compl. 85 *}.seal housing set of seals **}.o-ring back head lock nut nipple cap nipple (1/2", draining) cap optional equipment o-ring set ***} special tools set pressure gauge lifting eye set of seals front head, compl. 1 *}.front head guide **}.o-ring set of seals bushing lock ring **}.o-ring set of seals bushing piston dome nut 0.26kg washer 0.04kg stud nipple (intake) cap nipple (return) cap nipple ERG Korea CO., Ltd. 3 / 6

4 nipple nut cylindrical pin cover, compl. 23 *}.cover radial lip seal 0.06kg circlip **} o-ring cup seal flushing head side bolt shank adapter, T38E shank adapter, T45E shank adapter, T51E flushing connection back up ring **} o-ring **} o-ring set screw optional equipment drill collar (for drilling upwards T38) drill collar (for drilling upwards T45) drill collar (for drilling upwards T51) front head connection plate 1.54kg cup seal lock washer screw nipple 0.26kg guide 1.9kg cup seal kg **} o-ring flushing head 4.3kg cup seal stop ring 1.58KG **} o-ring guide 1.36kg cup seal flushing head 4.5kg cup seal stop ring, compl stop ring, compl. 1.6kg 18 *}.stop ring (split) **}.o-ring shank adapter, T shank adapter, R32E ERG Korea CO., Ltd. 4 / 6

5 shank adapter, T38E shank adapter, T45E shank adapter, T51E shank adapter, R32E shank adapter, R shank adapter, T38E optional equipment drill collar (for drrilling upwards R32/T38) drill collar (for drrilling upwards T45) drill collar (for drrilling upwards T51) low pressure accumulator housing diaphragm 0.04kg cover valve, compl. 0.04kg 4 *}.valve cap **} o-ring set of seals bearing housing 2 **} seal ring splined shaft 4 **} seal ring 5 **} o-ring intermediats parts drain plug washer cardan shaft cardan shaft 10 **} o-ring cog wheel set cog wheel set guide pin valve drive channel plate disc valve balance plate guide pin 18 **} o-ring 19 **} o-ring spacer pin spring ring valve housing 23 **} seat plug screw ERG Korea CO., Ltd. 5 / 6

6 screw 25 **} seal ring check valve ball check valve spring check valve plug washer [ 구형 ] [ 신형 ] KG housing diaphragm 0.04kg plug **} o-ring cover valve, compl. 6 *}.valve cap screw **} o-ring front head front head 10.20kg guide 1.1kg cup seal **} o-ring flushing head 4.2kg stop ring 1.4kg shank adapter R38 (17.1 in) shank adapter R32 (20.7 in) shank adapter T38 (17.1 in) shank adapter T38 (20.7 in) set of nipples set of nipples, compl. 1.04kg nipple for impact mechanism, intake nipple for impact mechanism, intake nipple for rotation motor, intake/return nipple for rotation motor, intake/return nipple for rotation motor, intake/return nipple for lub.air.hose 1/4" for oil-fog lubricator DIM ERG Korea CO., Ltd. 6 / 6

D40-T00A CLUTCH GROUP D40-T0A CLUTCH LEVER GROUP DK45-T0A CLUTCH HOUSING GROUP.....

D40-T00A CLUTCH GROUP D40-T0A CLUTCH LEVER GROUP DK45-T0A CLUTCH HOUSING GROUP..... TABLE OF CONTENTS [ENGINE] 4A0A-E00 CYLINDER BLOCK GROUP........................... 4A0LX-E00 CYLINDER BLOCK GROUP...........................3 4A0-E00 OIL PAN GROUP................................... 5

More information

T5855-G226A HST PROPER SHAFT GROUP T585-G230A SHAFT GROUP T585-G234A SHAFT 2 GROUP...

T5855-G226A HST PROPER SHAFT GROUP T585-G230A SHAFT GROUP T585-G234A SHAFT 2 GROUP... TABLE OF CONTENTS [ENGINE] 3B83-E00 CYLINDER BLOCK GROUP........................... 3B83-E020 OIL PAN GROUP................................... 3 3B83LW-E030 CYLINDER HEAD GROUP............................

More information

CK2810.pdf

CK2810.pdf TABLE OF CONTENTS [ENGINE] 3A39LW-E00 CYLINDER BLOCK GROUP........................... 3A50E-E00 OIL PAN GROUP................................... 3 3A39LW-E030 CYLINDER HEAD GROUP............................

More information

CK35 reservedelskatalog.pdf

CK35 reservedelskatalog.pdf TABLE OF CONTENTS [ENGINE] 3A65LX-E00 CYLINDER BLOCK GROUP........................... 3A50E-E00 OIL PAN GROUP................................... 3 3A65LW-E030 CYLINDER HEAD GROUP............................

More information

E010 CYLINDER BLOCK GROUP (0 01) 76

E010 CYLINDER BLOCK GROUP (0 01) 76 E010 CYLINDER BLOCK GROUP (0 01) 75 E010 CYLINDER BLOCK GROUP (0 01) 76 E020 PISTON, CRANKSHAFT GROUP (0 02) 77 E030 CYLINDER HEAD GROUP (0 03) 78 E040 ROCKER ARM GROUP (0 04) 79 E050 TIMING CASE GROUP

More information

나사식볼밸브.indd

나사식볼밸브.indd HWASUNG VALVES 19~1990 001~010 19. 03 19. 0 1991~000 199. 1 199. 1 199. 11 199. 09 1999. 03 1999. 09 1999. 09 1999. 10 1999. 11 000. 0 000. 03 001~010 001. 03 001. 10 001. 11 00. 0 003. 03 003. 0 00. 01

More information

기능.PDF

기능.PDF 1 1) 1 2) SK COMPLEX 1 Heating Cooling 3) 1 2 2 3 1) 2 2) 3 4 1) Floating Type Heat Exchanger 8 2) Fixed Type Heat Exchanger 11 3) U-Type Heat Exchanger 13 4) Air Fan Cooler 15 5) Double Pipe Heat Exchanger

More information

KM-350BL.pub

KM-350BL.pub PARTS BOOK KM-350BL For 1-Needle, Needle Feed Lock Stitch Machine Series PME-091202 SunStar CO., LTD. Information A. Parts Book 구성 Structure of Part Book 1 2 3 4 5 6 7 8 9 1:관계 별 고유 코드 Unique code by mechanism

More information

Microsoft PowerPoint - List(A~M).ppt

Microsoft PowerPoint - List(A~M).ppt SWF/C-Series Tubular Automatic Embroidery Machine PME-050425 Machine Layout A1 Machine Body Ass y (UK1202) 7 A2 Machine Body Ass y (UK1204) 9 A3 Machine Body Ass y (UK1206) 11 CONTENT A4 A5 Machine Body

More information

# KM

# KM PARTS BOOK 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER 1-NEEDLE, NEEDLE FEED LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER MODEL KM-506 SERIES KM-506-7S 1-NEEDLE, STRAIGHT LOCK-STITCH

More information

D101728X0KR_Oct18

D101728X0KR_Oct18 3710 3720 Fisher 3710 3720 3722... 2... 2... 2... 5... 6... 6 3722... 6 3722... 7... 8... 8 25 50 585 585R 3710 3720... 13... 15... 16... 17... 17,,... 17... 19 3720... 19... 20... 22... 22... 23... 24...

More information

레이아웃 1

레이아웃 1 JUNGSAN Enterprise Co., Ltd. JUNGSAN Enterprise Co., Ltd. MARINE ENGINE PARTS DIGITAL HOME APPLIANCES w w w. j u n g s a n. c o m CEO MESSAGE 당사는 지난 이십여년간의 산업용 볼트, 너트를 중심으로 한 기계요소 부품의 생산 노하우를 기반으로 998년

More information

D101351X0KR_May17

D101351X0KR_May17 646 Fisher 646... 1... 1... 3... 4... 4... 4... 5... 5... 5... 6... 7... 7... 7... 9... 9... 9... 9... 10... 11... 12... 12... 13... 15... 15... 15 1. Fisher 646 Fisher 646,,..,,,, 646,.,,.. W6783 1 www.fisher.com

More information

Microsoft PowerPoint - Chenille_PME

Microsoft PowerPoint - Chenille_PME Chenille Automatic Embroidery Machine PME-051101 A Machine Body Ass y 7 B Work Table 9 C1 Thread Stand 11 CONTENT C2 D Thread Stand (Chenille) Main Drive System 13 15 E1 Bed 19 E2 Bed (Chenille) 21 F1

More information

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series High Class 공압식엑츄에이터 PNEUMATIC ACTUATORS Rack & Pinion Designed GD-SERISE Double Acting GD-SERISE Single Acting (Spring Return) GINICE Co., Ltd www.ginice.co.kr / www.ginice.com GD-SERISE / GS-SERISE DESCRIPTION

More information

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc . B00 Breaker ) Main Body(Standard) 메인바디 ( 표준 ) a) Exploded view of B00 Breaker Main Body B00 브레이카메인바디분해도 7 9 7 0-0 9 7 9 (Acc. Ass'y) 0 7 (Valve Case Ass'y) 0 9 7 7 7 7 0 0 7 9 7 9 0 0 0 b) B00 Main Body

More information

D103198X0KR_Jul18 Korean

D103198X0KR_Jul18 Korean Fisher i2p-100... 1... 1... 2... 2... 2... 5... 7... 7... 8... 9... 10... 10... 11... 12... 12... 12... 12... 14... 14... 16... 16... 17... 18 1. Fisher i2p-100 W8710... 19... 20 Fisher i2p 100,, ( 1 )..,,,,

More information

TABLE OF CONTENTS [ENGINE] 3C00LWU-E00 CYLINDER BLOCK GROUP C00LWU-E00 OIL PAN GROUP

TABLE OF CONTENTS [ENGINE] 3C00LWU-E00 CYLINDER BLOCK GROUP C00LWU-E00 OIL PAN GROUP OWNER S MANUAL 600XD X X 505G-GB (Rev.0) RJL 00 May 0 TABLE OF CONTENTS [ENGINE] 3C00LWU-E00 CYLINDER BLOCK GROUP........................... 3C00LWU-E00 OIL PAN GROUP...................................

More information

#KM857/867..

#KM857/867.. PARTS BOOK KM-857 KM-857-7 KM-867 KM-867-7 PME-051214 MODEL KM-857 HIGH SPEED POST BED, 1- NEEDLE NEEDLE FEED LOCK STITCH MACHINE KM-857-7 HIGH SPEED POST BED, 1- NEEDLE NEEDLE FEED LOCK STITCH MACHINE

More information

13장_

13장_ C H A P T E R 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 13.1 ( ) 12 000 psi [ 13 1] 6in 10 [ 13 2] (stamping) 500 501 (pressure regulator) (oil mist) (lubricator) (air dryer) (muffler) 13.2 21 % 78 % 1 % 4

More information

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc 0. B0 Breaker ) Main Body(Standard) 메인바디 ( 표준 ) a) Exploded view of B0 Breaker Main Body B0 브레이카메인바디분해도 9 0 0 0-7 7 (Valve Case Ass'y) 9 9 0 9 9 9 7 0 9 0 7 9 7 9 0 0 b) B0 Main Body Parts List B0 메인바디파트리스트

More information

CFP 제작(0113)

CFP 제작(0113) C 1514E C ISO 9001 ISO14001 OHSAS 18001 C-series foot support process pump ISO2858 ISO5199 www.hsgoodsprings.com EASY TO CONTACT TEL : 82-55-268-8976 FAX : 82-55-268-7947 Global Excellence, Hyosung Pump

More information

D200138X0KR_Jun19

D200138X0KR_Jun19 Fisher 358 358i 58i............ 5... 6... 6... 6 58i... 8... 9... 14... 14... 14... 16... 16... 16... 17 358i... 17 58i... 19... 0... 0 ( ) 1. Fisher 358 358i W5498 1 W844-1 358 358i www.fisher.com ()......

More information

歯RCM

歯RCM Reliability Centered Maintenance Page 2 1.,,,. Mode Component, Sub-system, System, System. Reliability Centered Maintenance :, program? Mechanism Page 3 Page 4. Mode Mode () () (FMEA) (FTA) (LTA) System

More information

#KM-350AB..

#KM-350AB.. PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PME-051121 MODEL FOR THIN MATERIAL KM-350A-7S 1-NEEDLE, NEEDLE

More information

#KM-250š

#KM-250š PARTS BOOK FOR 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE SERIES KM-250AU-7S KM-250AU-7N KM-250A-7S KM-250A-7N KM-250B-7S KM-250B-7N KM-250BH-7S KM-250BH-7N KM-250BL-7S KM-250BL-7N KM-250AU KM-250A KM-250B

More information

The Top Ten Moulding Problems

The Top Ten Moulding Problems 900 1700 1960,,,,,,,,, FDA 1, II 500 100 (toughness) 1, 2 (screw) 25mm(01 ) (pellet) 3mm(0125 ), 23mm(009 ) 1,000kg(2,200lb) 25kg(551lb) 08g/cm 3 (50lb/ft 3 ) 1 2 3 4 (thermal shutoff), (heater band),

More information

소개.PDF

소개.PDF (c) Process Pressure Measurement 1 Process Pressure Measurement Flow, Level, Temperature Flow, Level, Temperature, 2, 1) ( ),, A F F/A 2), 3 (a) (b) (a) (b) (c) 1 (a) (ABSOLUTE PRESSURE), 10 kg/cm 2 abs

More information

00.1

00.1 HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Partly threaded, galvanized or yellow chromatized dk k L d m Head Ø dk

More information

D101728X0KR_Sep15_AQ

D101728X0KR_Sep15_AQ 3710 3720 Fisher 3710 3720 3722... 2... 2... 2... 5... 6... 6 3722... 6 3722... 7 CSA... 7 FM... 8 ATEX... 8 IECEx... 10... 11... 11 25 50 585 585R 3710 3720... 16... 18... 19... 20... 20,,... 20... 22

More information

PL E-Euro-V01.pmd

PL E-Euro-V01.pmd Price List valid from 1st of March 2009 English 1/2009 The Profile System Order comments Article-Number - additional specification.60 definines 1 bar of aluminium profile, length 6 m Example: 1.09.016040.14LP.60

More information

<53756E B4DCB5CEBAEAB8B4C1F62E707562>

<53756E B4DCB5CEBAEAB8B4C1F62E707562> PARTS BOOK SunStar Single-Head Bridge type E-U1201 PME-120509 1 Notice SunStar 1. 본책자는Parts Book으로제작되었으므로매뉴얼로사용불가합니다. 2. 조에속한파트는개별조립시제품의파손또는자수불량이발생될수있어해당파트에대한주문시에는조품목으로만구입이가능합니다. 3. 당사의 Part Book은다음과같은순서로분류되어있으니제품을구입한소비자께서는다음과같은순서로제품을검색하여주십시오.

More information

ÇѱÛÇ¥Áö

ÇѱÛÇ¥Áö KOSA KOSA KOSA KOSA KOSA Assembly, Engineering Plastic KOSA Accessory Content KOSA Overview K-004 Technical Data K-006 KA40B with Timing Belt Drive K-008 KA60B with Timing Belt Drive K-010 KA60S with Ball

More information

*KM-380BL,BLB724.

*KM-380BL,BLB724. PARTS BOOK KM-380BL KM-380BLB KM-380BL KM-380BLB PME-051104 MODEL FOR HEAVY MATERIAL KM-380BL CYLINDER-BED TYPE, 1-NEEDLE UNISON FEED, VERTICAL LARGE HOOK, LOCK-STITCH MACHINE. KM-380BLB CYLINDER-BED TYPE,

More information

Abstützbock.fm

Abstützbock.fm Doka 서포팅 로드 컨스트럭션 베어링 시스템 프레임 서포팅 컨스트력션 프레임 "Variable" 3.30m 187.8 580516000 Support. construction frame "Variable" 3.30m 구성 : (A) 서포팅 컨스트럭션 프레임용 웨일링 WU14 99.0 580510000 높이 : 252 cm (B) 멀티 - 퍼포스 웨일링 WS10

More information

#KM-340BL

#KM-340BL PARTS BOOK KM-340BL 고속 1본침 본봉 상하송 재봉기 High Speed, 1-Needle, Upper and Lower Feed Lock Stitch Machine W/Large Hook PME-100707 SunStar CO., LTD. INFORMATION A. Parts Book Structure of Part Book Unique code

More information

02 Reihe bis 750 bar GB-9.03

02 Reihe bis 750 bar GB-9.03 Water as a tool High-Pressure Plunger Pumps 02-Line (up to 750 bar) 252 702 1002 1502 1852 2502 Technical Data High-Pressure Plunger Pump Type 252 / 702 approx. 1.8 l approx. 50 kg net 45 mm/1.77 inch

More information

1 grating steel bar grating 730890 Hot Dip Galvanized Steel Bar Grating stage flooring stair treads 2 heat resisting casting 732510 parts of refuse in

1 grating steel bar grating 730890 Hot Dip Galvanized Steel Bar Grating stage flooring stair treads 2 heat resisting casting 732510 parts of refuse in 엔지니어링 / 플랜트 제작업체 2010 한일부품소재조달전시상담회(서울) 참가업체 안내 1. 업체 정보 회사명 상담 희망 기업에만 공개 회사명(영) 상담 희망 기업에만 공개 플랜트 설비(환경, 수처리, 에 Engineering & Construction (Envirnmental, Water 주요생산품 너지, 파이프라인, 강( 鋼 )구조, 산업기계) 주요생산품(영)

More information

05Àå ¶ôÅ·

05Àå ¶ôÅ· Locking Systems, Locks, Catches.1 Contents Locking systems, locks, catches, safes Symo locking system Magnetic catches Locker Locks.2 Symo Locking Systems.3 Symo Locking Systems.4 Symo Locking Systems.

More information

KM-380BL,BLB(100908)

KM-380BL,BLB(100908) PARTS BOOK KM-380BL KM-380BLB KM-380BL KM-380BLB MODEL FOR HEAVY MATERIAL KM-380BL CYLINDER-BED TYPE, 1-NEEDLE UNISON FEED, VERTICAL LARGE HOOK, LOCK-STITCH MACHINE. KM-380BLB CYLINDER-BED TYPE, 1-NEEDLE

More information

#KM

#KM PARTS BOOK KM-2300 Code Lubrication type Code Application F Full-Dry type A Light materials S Semi-Dry type G General materials M Micro-Lubrication type B Heavy materials Only use B (Heavy materials) code

More information

#KM-1751/1791..

#KM-1751/1791.. PARTS BOOK KM-1751 KM-1791 Code Lubrication Type Code Application Code Hook Code Trimming 0 S M Semi-Dry Type Micro Lubrication Type Dry Head F G Foundation General materials None L Standard Hook Large

More information

D200138X0KR_Aug17

D200138X0KR_Aug17 358, 58i, 3583 Fisher 358 358i, 58i, 3583............ 6... 7... 7... 7 58i... 8 CSA... 9 FM... 10 ATEX... 10 IECEx... 1... 13... 18... 18... 18... 0... 0... 0... 1 358i... 1 58i... 3... 4... 4... 6 ( )

More information

매연1.hwp

매연1.hwp . 1..? ( ). ( ). (HC) ( )., (C). [HC ( )], 1, *. (.) (BenzoPyrene),. - 1 - 0.0110. ( 1.). (WHITE SMOKE) (BLACK SMOKE),,,. 1.. HC C( ) (BLUE SMOKE),... ( ) (Cm Hn) (C)..,,,. - 2 - (WHITE SMOKE) ( ) ( )

More information

#KM560

#KM560 KM-560 KM-560-7 PARTS BOOK KM-560 KM-560-7 INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part

More information

#KM-1750/1790..

#KM-1750/1790.. PARTS BOOK KM-1750 KM-1790 Code Lubrication Type Code Application Code Hook Code Trimming 0 S M Semi-Dry Type Micro Lubrication Type Dry Head F G Foundation General materials None L Standard Hook Large

More information

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS [Caution] Attention to red sentence 3-1. Disassembly and Reassembly R520/ 1 2 1 1. As shown in picture, adhere Knob to the end closely into the arrow direction(1), then push the battery up (2). 2. Picture

More information

#DPK5(PB)(9.8.19)

#DPK5(PB)(9.8.19) PARTS BOOK DPK-5 포스트 베드, 1본침 본봉 지그재그 재봉기 Post Bed, Single-Needle Lock Stitch Zig Zag Sewing Machines PME-090929 SunStar CO., LTD. INFORMATION A. Parts Book 구성 Structure of Part Book ① ② ③ ④ ⑤⑥ ⑦ ⑧⑨ ① 관계

More information

IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사 항을고려하여주시면긴수명을보장합니다. 1) 용량선정이적정하게되었는지확인하십시오. 2) 충돌물체와 Shock Absorber 의설치각도가일치한가를확인하십시오. Piston Rod 의중

IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사 항을고려하여주시면긴수명을보장합니다. 1) 용량선정이적정하게되었는지확인하십시오. 2) 충돌물체와 Shock Absorber 의설치각도가일치한가를확인하십시오. Piston Rod 의중 SHOCK ABSORBER 취급설명서 본사 : (153-709) 서울시금천구디지털로9길 32 에이동 704호 ( 갑을그레이트밸리 ) Tel. 02-2106-8585( 대표 ) Fax. 02-2106-8588 http: //www.izmac.co.kr E-mail: richardlee@izmac.co.kr IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사

More information

Promise for Safe & Comfortable Driving

Promise for Safe & Comfortable Driving AL. WHEEL CUTTING SOLUTION Promise for Safe & Comfortable Driving 17 AL. WHEEL CUTTING SOLUTION 19 22.5 L-AW SERIES AL WHEEL TURNING CENTER 01 03 02 01 01 L-AW SERIES AL WHEEL TURNING CENTER 02 03 L-AW

More information

#SC-8200.B.

#SC-8200.B. PARTS BOOK SC8200 CONTENTS A B C D E F G H I J K L Machine Body Mechanism Upper Shaft Mechanism Needle Bar Mechanism Presser Bar Mechanism Pulley Mechanism Feed Mechanism Lower Shaft Mechanism Looper

More information

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i SERVICE MANUAL N200M / N300M / N500M ( : R22) e-mail : jhyun00@koreacom homepage : http://wwwicematiccokr (specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements)

More information

The Top Ten Moulding Problems

The Top Ten Moulding Problems (solid profile) Shore D 55D,,,,,,,, Shore D 47D :, :, : :, ( ),,,,, (hose) (tubing), (belt), (supercool) (extruded profile), (rope), (sheeting), (film) 1 2, (polymer),, (screw), 2, (vent), (barrel), (

More information

Microsoft Word - Installation and User Manual_CMD V2.2_.doc

Microsoft Word - Installation and User Manual_CMD V2.2_.doc CARDMATIC CMD INSTALLATION MANUAL 씨앤에이씨스템(C&A SYSTEM Co., Ltd.) 본사 : 서울특별시 용산구 신계동 24-1(금양빌딩 2층) TEL. (02)718-2386( 代 ) FAX. (02) 701-2966 공장/연구소 : 경기도 고양시 일산동구 백석동 1141-2 유니테크빌 324호 TEL. (031)907-1386

More information

MAX DRILL Construction system of MAX Drill's Code no. DRILL VMD KOREA TECHNICS is The TOP of the world technics 49

MAX DRILL Construction system of MAX Drill's Code no. DRILL VMD KOREA TECHNICS is The TOP of the world technics 49 010~054 본문 2011.04.25 06:13 PM 페이지48 ApogeeX TURBO DRILL HSD 2 D 범용선반 가공시, 가공직경 ø이상은 TSD나, MXD 사용을 권장함. DRILL The drill body treated by forging was much solider and much stronger in impact. The especially

More information

USER INSTRUCTION

USER INSTRUCTION 사용자설명서 for High Vacuum Rotary Vane Pump W2V80. 목차 1. 기본명칭및세부 SPEC. 2. 검사 3. 설치 4. 가동 5. 관리지침 6. 문제해결 7. W2V80 의외형도 8. W2V80 의전개도 9. W2V80 의부품목록 (Part List) 10. 수리및 Overhaul 을위한수리키트목록 11. 기술지원및연락처 1. 기본명칭및세부

More information

歯coolingtower개요_1_.PDF

歯coolingtower개요_1_.PDF . Cooling Tower Cooling Tower Counter Flow Cross Flow,. 1.Cooling Tower. Air Flow 1) Counter Flow System Fan Air Fan Discharge Distributor Fill Counter Flow ( ) Cold Water Basin. 1 Counter Flow System

More information

Cover

Cover 0WF- Parts List MODEL : GBC 0WF- (00..0) Rev : 0 GBC 0WF- (0. 0 / Rev 0.0) Power Cord Assy No. Part No. Part name 00 G0 FUSE STICKER PC0.T *. 00000 FUSE HOLDER f.*0mm0v0a EA 000 000 GLASS TUBE FUSE 0mm

More information

WOMA Pumps - Z Line

WOMA Pumps - Z Line High-Pressure Plunger Pumps Z-Line (up to 1500 bar) 150 Z 250 Z 400 Z 550 Z 700 Z 1000 Z High-Pressure Plunger Pump Type 150 Z 211 133 250 615 100 95 Discharge 60 -Konus 9.5 deep M12x17 deep 322 255 331

More information

#KM-235(110222)

#KM-235(110222) PARTS BOOK KM-235A/B INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part Parts No. : Unique Product

More information

CK30M-T540A DIFFERENTIAL GEAT SHAFT GROUP CK30M-T550A FRONT AXLE CASE GROUP CK30M-T560A FRONT SHAFT G

CK30M-T540A DIFFERENTIAL GEAT SHAFT GROUP CK30M-T550A FRONT AXLE CASE GROUP CK30M-T560A FRONT SHAFT G TABLE OF CONTENTS [ENGINE] 3A39LW-E00 CYLINDER BLOCK GROUP........................... 3A50E-E00 CYLINDER BLOCK A GROUP......................... 3 3A50LX-E00 CYLINDER BLOCK B GROUP.........................

More information

WIDIN - Toolholding Catalogue.pdf

WIDIN - Toolholding Catalogue.pdf T CH CHUC UCK K 60 ER Strong Torque Power ER Chuck have strong torque power. Slim designed ER Nut were minimized an interruption to workpiece. If using Carbide Drill and coated drill, it can be improve

More information

0118_Wealth Management

0118_Wealth Management Wealth Management Guide 3 4 Daewoo Securities Co., Ltd. Wealth Management Guide 5 6 Daewoo Securities Co., Ltd. Wealth Management Guide 7 8 Daewoo Securities Co., Ltd. Wealth Management Guide 9 10 Daewoo

More information

#KLZ-371(PB)

#KLZ-371(PB) PARTS BOOK KLZ-371 INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part Parts No. : Unique Product

More information

국제트랙터 5805, 5805S 엔진부 (Cummins B3.3) 부품명세서 (PART'S CATALOG) KUKJE MACHINERY CO.,LTD

국제트랙터 5805, 5805S 엔진부 (Cummins B3.3) 부품명세서 (PART'S CATALOG) KUKJE MACHINERY CO.,LTD 국제트랙터 5805, 5805S 엔진부 (Cummins B3.3) 부품명세서 (PART'S CATALOG) KUKJE MACHINERY CO.,LTD coverage PRODUCTS WARRANTED COVERAGE This warranty covers any failures of parts on or after December 1, 1986, Which result,

More information

untitled

untitled Jul-09 J I T T O O L I N G just in time 인천광역시남동구고잔동 256-5 133호 TEL : 070-7584 - 0989 FAX : 032) 429-0985 E-MAIL : jittooling@hanmail.net http ://www.jittooling.lu.to --- 임직원일동 --- 목차 (CONTENTS) 1. HYDRAULIC

More information

歯Trap관련.PDF

歯Trap관련.PDF Rev 1 Steam Trap Date `000208 Page 1 of 18 1 2 2 Application Definition 2 21 Drip Trap, Tracer Trap, 2 22 Steam Trap 3 3 Steam Trap 7 4 Steam Trap Sizing 8 41 Drip Trap 8 42 Tracer Trap 8 43 Process Trap

More information

#SPS/B-BH6000š

#SPS/B-BH6000š PARTS BOOK SPS/B-BH6000 모터직결형 전자 제어식 아일렛 단추구멍 재봉기 Direct Drive,Electronically Controlled Eyelet Button Holing M/C PME-060103 PME-060111 SUNSTAR MACHINERY CO., LTD. CONTENTS A B C D E F1 F2 GH I J J1 J2

More information

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged

More information

#SPS/C-5050.B.

#SPS/C-5050.B. PARTS BOOK SPS/C-5050 Series SPS/C-8050 Series Purposes H : Heavy material This is a parts book. It cannot be used as a manual. CONTENTS A BC D EF G HI J K L M N O P Q R ST U V W X Y Z Machine Body Mechanism

More information

#KM-250(PB)

#KM-250(PB) PARTS BOOK FOR 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE SERIES KM-250AU-7S KM-250AU-7N KM-250A-7S KM-250A-7N KM-250B-7S KM-250B-7N KM-250BH-7S KM-250BH-7N KM-250BL-7S KM-250BL-7N KM-250AU KM-250A KM-250B

More information

JSI-EN-04-2E-001=LHDV.hwp

JSI-EN-04-2E-001=LHDV.hwp ` JSI - EN - 05-2E - 002 Date Feb 1st, 2005 Total Pages 6 P re se n t P a g e 1 Boom load holding valve The boom pump sucks hyd. oil from the reservoir and supplies oil to each boom cylinder through the

More information

IAPH289SEF_XFO1.ai

IAPH289SEF_XFO1.ai C1256 E0007 C1248 C1268 C1488 A0219 A0944 M0042 A0118 G0139 A0821 AirConditioning AirConditioning (Indoorunit) (Indoorunit) C1485 A1762 A1579 B0126 C1345 A0971 C1369 A1928 L0010 A1774 W0013 A1791 M0039

More information

ALL NEW WRANGLER ACCESSORIES JEEP..,

ALL NEW WRANGLER ACCESSORIES JEEP.., ALL NEW ACCESSORIES JEEP..,.... 09 5 DRESS-UP INTERIOR OUTDOOR COLLECTION JEEP SERVICE 2 3. FRONT AIR DEFLECTOR,. 2,. 8225367 / 7,000 2. FRONT END COVER / HOOD COVER.. 8225365 FRONT END COVER / 25,000

More information

동아내지1수(A~E)-수정2

동아내지1수(A~E)-수정2 DFT-10A-10P FILE NO. Body : Polycarbonate Contact : Brass, Nickel Plated Cover : PS resin Current Rating : 10A Voltage Rating With standing Voltage : AC 2500V one minute Insulation Resistance : 100M over

More information

-시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사

-시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사 대청호자연생태관 복합체험시설 활용 리모델링공사 시 방 서 ( 건 축 ) 2016. 05 -시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사 55

More information

LS Cable PartBook Document

LS Cable PartBook Document CYLINDER HEAD Q116S01-2 39,41 CYLINDER HEAD Q116S01-3 43,45,47,48,50 VALVE MECHANISM Q121S01-2 39,41,43,45,47,48,50 ROCKER COVER & CAMSHAFT Q115S01-3 39,41,43,45,47,48,50 CRANKCASE ASSY Q110S01-3 39,41,43,45,47,48,50

More information

용도 Application 용 Firefighting 횡형펌프 VS 입형펌프설치공간비교 Installation Space: orizontal vs. Vertical 수용 Water Supply 공 용수용 Industrial Water Supply 횡형펌프주위배관 Pip

용도 Application 용 Firefighting 횡형펌프 VS 입형펌프설치공간비교 Installation Space: orizontal vs. Vertical 수용 Water Supply 공 용수용 Industrial Water Supply 횡형펌프주위배관 Pip B 9005 M D Det Norske Veritas Management System Certificate ISO 9001 Det Norske Veritas Management System Certificate ISO101 Det Norske Veritas Management System Certificate KOSA101 고효율기자재 igh Efficiency

More information

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection)

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) SERVICE MANUAL (Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) 12 (Storage Bins) 12 (Ice Machine)

More information

용도 Application 수 용 Cold/hot water Circulation 선정도 Selection Chart 공 용수용 Industrial water Supply 해수용 Sea Water 60z (17RPM) 공사용 Public Works 용 eating Ci

용도 Application 수 용 Cold/hot water Circulation 선정도 Selection Chart 공 용수용 Industrial water Supply 해수용 Sea Water 60z (17RPM) 공사용 Public Works 용 eating Ci B 9005 M D Det Norske Veritas Management System Certificate ISO 9001 Det Norske Veritas Management System Certificate ISO101 Det Norske Veritas Management System Certificate KOSA18001 고효율기자재 igh Efficiency

More information

최종동아수정도큐01

최종동아수정도큐01 DONG HWA INDUSTRIAL CO., LTD. INDUSTRIAL CO., LTD. Innovative company with advanced technology DONG HWA CONTENTS 9 Water cooled oil coolers 11 Water cooled oil coolers(dnc) 13 Water cooled oil coolers(dlc)

More information

SS 7350

SS 7350 PARTS BOOK SS 7350 Small Cylinder Bed, Inter Lock Chine Stitch Machine PME-090511 SUNSTAR MACHINERY CO., LTD. Information A. Parts Book 구성 Structure of Part Book 1 2 3 4 5 6 7 8 9 1:관계 별 고유 코드 Unique code

More information

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78 - - HDV -8-7 -9 S1-0 S - S - S - -11 - S1-16 K -0 K - S -7 S -0 S - HV-6, HV-8-78 -7-9 S11, S1-60 S1, S1-61 -7-9 S11-0 K1-1 K1 - S1 - S1 - S1 - HNV000-6 -6 HMV -66 HMV -69 HLV -7 HLV -7 HFV -76 HVC -81

More information

PART 8 12 16 21 25 28

PART 8 12 16 21 25 28 PART 8 12 16 21 25 28 PART 34 38 43 46 51 55 60 64 PART 70 75 79 84 89 94 99 104 PART 110 115 120 124 129 134 139 144 PART 150 155 159 PART 8 1 9 10 11 12 2 13 14 15 16 3 17 18 19 20 21 4 22 23 24 25 5

More information

KPF카탈로그.qxp

KPF카탈로그.qxp 초일류자동차부품및산업용부품전문기업 Parts - Automotive Fasteners - Construction - Petrochemical Plant - Heavy Equipment & Machinery - Wind Power www.kpf-global.com The World is Our Place C O N T E N T S 0 1 인사말 0 2 KPF의지나온길

More information

0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의

0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의 0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지6 GEAR COUPLING 0604크리애드-중앙카프링수정 2012.6.4 10:46 AM 페이지7 GEAR COUPLING 특징 / Distinctive 1. 중앙(Jac) 기아카프링은 전달마력에 비하여 소형 경량이며 고속 회전시에도 소음 및 진동이 거의 없고, 긴 수명을 유지하여 전달 동력의

More information

Clamping glossary Case hardening: The surface of the components is hardened (60 HRC) to a depth of about 1 mm (0.04 ). The core shows a high tensile s

Clamping glossary Case hardening: The surface of the components is hardened (60 HRC) to a depth of about 1 mm (0.04 ). The core shows a high tensile s Fast changeover, fast payback: The original quick jaw change power chuck KNCS -N Easy lubrication even on vertical machines with 3 radial built-in grease nipples. Minimal set-up times Jaw change in less

More information

6_14_NCM.qxd

6_14_NCM.qxd ir Cylinder: tandard/on-rotating Rod Double cting/ingle cting, ingle Rod/Double Rod eries CM ø3/4", ø7/8", ø1 1/16", ø1 1/4", ø1 1/2", ø2" 1 CJ1 CJP CJ2 CM2 CG1 M M1 C2 C1 C76 C85 C95 CP95 CM C D- -X 20-

More information

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기구 Governor (Mixer, Boiler, Furnace, Plant Air Service) 특징 고정밀도, 대유량 - Loading Type Pilot

More information

TM yosung Turbine Multi-Stage Pump 용도 Application 수용 Water supply 선정도 Selection Chart 용 Firefighting 공 용수용 Industrial Water Supply z (17RPM) 수도용 City

TM yosung Turbine Multi-Stage Pump 용도 Application 수용 Water supply 선정도 Selection Chart 용 Firefighting 공 용수용 Industrial Water Supply z (17RPM) 수도용 City B 900 M D Det Norske Veritas Management System Certificate ISO 9001 Det Norske Veritas Management System Certificate ISO1 Det Norske Veritas Management System Certificate KOSA1 고효율기자재 igh Efficiency Equipment

More information

°¡°Ç6¿ù³»ÁöÃÖÁ¾

°¡°Ç6¿ù³»ÁöÃÖÁ¾ J 2007. 6 J J J J J J J J Special J Special J J Special 01 02 03 04 05 06 07 J J Special J J Special J Special J J Special J J Special J J Special J J Special J J J J J J J J J J J J J J J J J J J J

More information

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v RK 5 75/0.0 압력 릴리프 밸브 파일럿 작동식 타입 ZDB와 ZDB 공칭 사이즈 6 시리즈 X 최대 작동 압력 5 bar 최대 유량 60 L/min H556 0 타입 Type ZDB 6 VP-X/... 개요 특징 목차 페이지 특징 주문코드 우선 공급 가능 사양 기호 기능, 단면도 기술자료 특성곡선 유니트 치수 샌드위치 플레이트 밸브 DIN 0 형식 A에

More information

REVERSIBLE MOTOR 표지.gul

REVERSIBLE MOTOR 표지.gul REVERSIBLE MOTOR NEW H-SERIES REVERSIBLE MOTOR H-EX Series LEAD WIRE w RH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : Min.) MOTOR OUTPUT VOLTAGE (V) FREQUENCY (Hz) INPUT CURRENT (ma) RATING SPEED (rpm) STARTING

More information

RACK JACK RJ05-Series SUNIL P.L.S RACK JACK (Motorized Linear Unit) RJ05 Series RACK JACK 1)

RACK JACK RJ05-Series SUNIL P.L.S RACK JACK (Motorized Linear Unit) RJ05 Series RACK JACK 1) SUNIL P.L.S (Motorized Linear Unit) RJ05 Series 1) CONTENT1S 1. 의구조및성능 2. 의종류 3. 사용용도 4. 내부구조도 5. RJ Series 선정표 6. RJ-B Series 선정표 7. RJ-H Series 선정표 8. Geared Motor 선정방법 9. 속도계산식 10. Rack Jack 의외관및후처리

More information

#SC-7300..

#SC-7300.. Ref. Parts Note Name of Parts 35 36 N-2 N-3 N-4 N-6 N-7 N-8 N-5 N-1 N-39 N-41 N-40 N-40 N-38 N-38 N-37 N-15 N-16 N-16 N-35 N-36 N-34 N-36 N-30 N-28 N-31 N-32 N-33 N-29 N-17 N-20 N-21 N-23 N-23-1 N-26 N-18

More information