HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) I/O 2. (MANUAL OPERATION)

Size: px
Start display at page:

Download "HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) I/O 2. (MANUAL OPERATION)"

Transcription

1 HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM

2 HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) I/O 2. (MANUAL OPERATION) JOG 2.3 MPG (Handle) 2.4 MANUAL ABSOLUTE ON/OFF 3. (AUTOMATIC OPERATION) 3.1 AUTO 3.2 MDI (PROGRAM RESTART) 3.5 DNC 3.6 EDIT (Handle Interrupt) 3.9 (Mirror Image) 3.10 / (Tool Retract / Recover) 3.11 (Retrace) 3.12 / CSCAM

3 HX - Operation Manual MC / TC / CUT / QT 4. (TEST OPERATION) 4.1 MACHINE LOCK 4.2 FEED OVERRIDE 4.3 OVERRIDE 4.4 (DRY RUN) 4.5 (SINGLE BLOCK) 5. (SAFETY FUNCTION) 5.1 (EMERGENCY STOP) 5.2 OVERTRAVEL / SOFT LIMIT 5.3 STORED STROKE CHECK ,, LINE 6.7 (BOOK MARK) 6.8 PLAY BACK 6.9 HELP () (Real TPG) 8.2 (Test TPG) CSCAM

4 HX - Operation Manual MC / TC / CUT / QT (F6) 9.4 (F5) DNC (F1) 12.5 (F2) 12.6 (F3) 12.7 (F4) 12.8 (F5) 12.9 (F6) (F8) HELP (SHIFT+F12) () 13.2 () CSCAM

5 HX - Operation Manual MC / TC / CUT / QT / (Cavity / Core) 14.2 / / CSCAM

6 1.1 MDI unit 1.2 (SOFT KEY). TFT/LCD,. F1 ~ F8.,. 1.3 (RESET KEY) RESET. MDI. Full Key RESET. ESC.

7 . M, S, T ( 0:/1: ) 1.4,,,. 1.5 Ins Del Enter Help Cancel G.. Delete... G. PC keyboard F12.,,. PC keyboard Alt.

8 1.6,,, MDI,,,. PgUp PgDn,. 1.7 Space Home End Ctrl Alt Tab Control Alternate TAB.... PC Base PC Control. Cancel. PC Base PC Alt. Windows PC TAB. 1.8 I/O USB MDI. USB /.

9 2.1 CNC POWER ON. CNC., ZRN(REF1.), JOG. JOG JOG.,. 1. POWER ON. 2. ZRN (ZERO RETURN, REF1.). 3. JOG. MC, Z JOG

10 2.2 JOG JOG. ( ).. 1. RAPID. 2. Metric (mm/min) Inch (inch/min) Metric (mm/min) Inch (inch/min) < 1 : > < 2 : >

11 1. JOG JOG- JOG+. 4. RAPID. 5. (RAPID Override) 30%. 6. LIMIT (Over Travel ) O.T RELEASE. JOG JOG RAPID

12 2.3 MPG (Handle) MPG(Manual Pulse Generator)., X1(1 ), X10(1 X 10 ), X100 (1 X 100 ). MPG 1.( 1 MPG PM[1512~1543].) < 1 : MPG > ) 0.001mm X 1 : [mm/pulse] X 10 : [mm/pulse] X 100 : [mm/pulse] 1. MPG ( Handle ). 2.. MPG X1, MPG X10, MPG X MPG. 5..

13 MPG JOG RAPID

14 2.4 MANUAL ABSOLUTE ON/OFF Manual Absolute ON/OFF,. Switch ON. OFF shift. Manual Absolute ON/OFF. N1 G90 G01 X100. Y100. F100 N2 X200. Y200. N3 X300. Y250. : ON : OFF 1) N1, (X +20, Y +100.), Cycle Start N2. (220, 300) (300, 250) (120, 200) (200,200) : ON : OFF (100, 100) 2) Feed Hold N1 Feed Hold, (Y +70.), Cycle Start N2

15 . (200,270) (300, 320) (300, 250) (120, 200) (200,200) : ON : OFF (120, 130) 3) 1 1. N1 G90 G01 X100. Y100. F100 N2 X200 Y200. : X +20, Y +70 N3 X300. N3 Y300. (320, 370) (300, 300) (220,270) (320, 270) : ON (200,200) (300,200) : OFF (100, 100) 4) OFF.

16 3.1 AUTO (), Cycle Start, AUTO, Cycle Start Lamp. AUTO Feed Hold AUTO., Cycle Start. RESET AUTO, RESET. 1. AUTO. 2. F ( Enter) 4. Cycle Start, AUTO Cycle Start Lamp. AUTO

17 Cycle Start Lamp. 5. AUTO. AUTO Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. AUTO, AUTO Reset.,. AUTO AUTO NC Program ,. (buffering). 6.,. 7. 4,5,6 AUTO. AUTO AUTO. M00(Program Stop), M01(Optional Stop) M02, M30 (Program End). Feed Hold.

18 Program Stop (M00) M00, AUTO.. Single Block Modal, Cycle Start AUTO. Optional Stop (M01) M00 M01, AUTO., Optional Stop ON. Program End (M02, M30) Main Program M02 M30, AUTO. M30, M02. Main Program M02 M (M02, M30.). Feed Hold AUTO Feed Hold, AUTO. MDI Panel, AUTO.. Option Block Skip(= Block Delete) Optional Block Skip ON / (slash). /

19 . /, (.). / ON. Optional Block Skip /. 10 /0 ~ /10., /0 /. AUTO

20 3.2 MDI MDI, MDI Program,. Test,, feed. MDI MDI (, F9). 1. MDI. 2. Program Program.. 3. Program Cursor.. Cycle Start. Program. 4. Program End(M02, M30), Program (). AUTO. 5. M99, Program.

21 6. MDI. MDI Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. MDI MDI Panel,.,. 7. MDI, AUTO AUTO. Program MDI Program. PA[3] MDI 0, MDI MDI. PA[3] 1 MDI POWER OFF. F7.

22 MDI Cursor. MDI Program MDI Program. 1. MDI,. 2. MDI. 3. MDI. MDI

23 3.3 LAN. PC AUTO. 1. F ( 7 ) 3. PC. 4. PC NC. 5. AUTO AUTO Cycle Start. 1. AUTO. (=AUTO )

24 3.4 (PROGRAM RESTART) AUTO RESET,,.. 1. MDI,, Feed Cycle Start. 2. EDIT. F7 UTILITY. 3. MDI (G54 ~ G59), Feed, G code. 4. AUTO, Cycle Start. 5. EDIT RESET. RESET AUTO RESET,.( PI[133] ) (0), (1), (2) 3. PI [133] 0 : RESET., /. MDI Feed Cycle Start, AUTO Cycle Start..

25 1 : 2 : RESET.. EDIT Word AUTO Cycle Start. RESET. Cycle Start. 1. RESET, Feed. AUTO

26 3.5 EDIT EDIT AUTO AUTO.. 1. EDIT. 2. AUTO Feed Hold EDIT. 3. (PA[323]) (PA[323]) 1 F3. 5. F3 6. Background AUTO loading.

27 1. EDIT (Background Edit). 2. EDIT RESET. 3. EDIT AUTO Cycle Start. EDIT

28 ( F5 F6 ) /. 5. AUTO. 6. Cycle Start RESET EMG-STOP.. Cycle Start. 9. RESET /.

29 MDI. Input Enter F2..

30 F3.. F4.. F5.., F6 / F7.

31 . F8 /. : F8. Ladder

32 3.8 (Handle Interrupt) AUTO MPG. (Handle Interrupt) AUTO (Handle Interrupt) ON, MPG. 1. MPG MPG (x 1, x 10, x M, x N), MPG... Interlock Mirror Image Interlock. Interlock ON,. Mirror Image. Mirror Image ON, Plus(+) Interrupt. Data.

33 (Absolute) (Relative) (Machine) (=Absolute )..., Page Up Key. Clear RESET, (M30, M02), (G54~G59) 0.

34 3.9 (Mirror Image) Mirror Image ON AUTO Mirror Image. 1. Single Block, AUTO. Mirror Image. 2. Mirror Image. 3. AUTO, Cycle Start AUTO. Mirror Image Maker. Mirror Image G code Mirror Image (G51). 1., Cycle. 2. AUTO Mirror Image G00, G01, G02, G03, G31.x. ) (Mirror Image) G51, ( PI[149], PI[108~116]) G51.( factor (Mirror Image).)

35 3.10 / (Tool Retract / Recover) AUTO / 1. AUTO [ ] ON. AUTO AUTO. &. 2.. JOG, MPG , 10 point.,. 10.

36 1.,. 2., AUTO [] ON. DRY RUN point,.(single Block ) 4., Feed Hold. 5. Cycle Start. 2. RESET Data,. / TLMODL [F64.08] TLESCL [F64.09] TRRTN [G79.11] HIGH. TLRTNL [F64.0A]

37 TLESC [G] TLMODE [F] TLESCL [F] TLRTN [G] TLRTNL [F]

38 3.11 (Retrace) AUTO [ ] Program. Program. 50. ON/OFF RVS () [G39.8] RVSL () [F30.8] AUTO

39

40 3.12 / PLC Custom Macro,. / AUTO.,. 1. AUTO M code( ).( 4 ) 2. AUTO RESET EMG-STOP. 4 #8064 = #6205 #8065 = #6206 M99

41 4.1 MACHINE LOCK.. 1. MACHINE LOCK ON MACHINE LOCK M, S, T. 2. MACHINE LOCK.( Maker ) 3. MACHINE LOCK ON MACHINE LOCK OFF. 4. MACHINE LOCK OFF.

42 4.2 FEED OVERRIDE Feed 0% 250% 10%. FEED OVERRIDE. Maker 32 OVERRIDE. 1. FEED OVERRIDE %. 1. FEED OVERRIDE (100%) Feed. 2. OVERRIDE CANCEL ON FEED OVERRIDE 100%.

43 4.3 OVERRIDE 0%, 25%, 50%, 100%. Maker 32 OVERRIDE RAPID %. 2. OVERRIDE. G00 G27,G28, G30

44 4.4 (DRY RUN). DRY RUN JOG DRN(DRY RUN) ON. 3. DRY RUN. 4..

45 4.5 (SINGLE BLOCK) AUTO, DNC MDI. PI[83] PI[84]. 1. SBK(Single Block) ON. 2. Cycle Start. 3. Cycle Start

46

47 5.1 (EMERGENCY STOP). 1. EMERGENCY STOP PLC. 3. EMERGENCY STOP.

48 5.2 OVERTRAVEL / SOFT LIMIT SOFT LIMIT stroke stroke OVERTRAVEL. SOFT LIMIT stroke stroke SOFT LIMIT. SOFT LIMIT. SOFT LIMIT 2. (PM[3378 ~ 3409], PM[3410~3472] ) SOFT LIMIT OVERTRAVEL. 1. OVERTRAVEL O.T RELEASE JOG MPG stroke. 2. SOFT LIMIT stroke.

49 5.3 STORED STROKE CHECK (Stored Stroke). /. 2 (PM[3474], PM[3475] /, PM[3476~3481] ), G22 X_ Y_ Z_ I_ J_ K_, G / 0 1,. 2. G22 X_Y_ Z_ I_J_ K_. 3. G22. 4.,.

50 F3. 2. F3. 3.,. (.NC), NC.

51 4. F1. 5. ENTER,.

52 1 EDIT _AUTOSAVE.NC NC., AUTO loading MB (CE 3MB). 2.,. TAB. 3..

53 6.2.,. F2. 1. F ( ) F4..

54 3.. F1 ( )..(.) 2 ( ).

55 6.3,.,. 1.,,,. G00 X100 (Y20).. G00 Y20 X100 2.,,,. G00 Y20 X100 DEL. G00 Y Windows Ins, Ins Insert.

56 6.4,,,,,. WINDOWS. 1. /. G00 X100 G01 Y10.1 Z10.3 SHIFT,,, Page Up, Page Down. ( Drag.) G00 X100 G01 Y10.1 Z10.3 SHIFT G00 X100 G01 Y10.1 Z10.3, DEL. 3.

57 2. G00 X100 G01 Y10.1 Z10.3 Ctrl C G00 X100 G01 Y10.1 Z10.3 Ctrl X. Z ,,,. G00 X100 G01 Y10.1 Z10.3 Ctrl V. G00 X100 G01 Y10.1 Z10.3 G00 X100 G01 Y10.1

58 6.5,. ENTER.. 1 () 1. UTIL >> F7, F ENTER.(.) CANCEL

59 RESET. 3. (Space ) /. 2 () 1. UTIL >> F7, F2. 2.,., TAB, ENTER. TAB ENTER..

60 3. (Space ) / /. 4...,... Ctrl,,,.

61 6.6 LINE. 1. UTIL >> F7, F ENTER.

62 6.7 (BOOK MARK). 1. UTIL >> F7. Ctrl F , Ctrl F4. (, Toggle.) 3. F4. 4. Shift F4.

63 6.8 PLAY BACK 1. JOG MPG. 2.. X 3. PLAY BACK Play Back.. X X0.000 Y Z

64 6.9 HELP 1. G code G code MDI HELP G code HELP. 2. G code HELP F2 G code. 3. HELP /Help htm. G code HELP. 4. G code HELP G htm. G htm. 5. M code 2000.htm

65 . 6. M code MDI HELP M code HELP.

66 7.1.. AUTO. 1. F8. 2. NC 20. NC. 3.,. (comment). 4. Enter ( ). 5. NC. Enter,... NC NC DIR.

67 6.

68 7.2.,,. 1. F8. 2.,,,. 3. F1, F ( F7 ) F R S. C.. (.NC ) Enter.

69 F8. 2.,,,.. 3. F3. 4. Y/N. Y, N 5. Y. 6. AUTO.

70 F8. 2.,,,.. 3. F5. 4..( ) Enter. 5..

71 7.5 ().,. 1. F8. 2.,,,.. 3. F6.. Enter..NCT

72 8.1 (Real TPG).. MDI. HMI PP[20] TPG (0:/1:/2:NCT ). NC..(:, :, : ), (PA[409] Real TPG : ), (PA[407] Real TPG ) (PA[408] Real TPG ).

73 1. F1. 2. AUTO DNC, F1.. (.) 3.. : PgUp.(.) : PgDn. (.) Zoom All : ZoomAll F5.. View : View F3.. XYZ, XY, YZ, ZX 4 View. () :. View F4.

74 .,,,. ENTER, View F4. ( ) :,.,,,.(

75 .) : F (.).., F7 () clear.

76

77

78 8.2 (Test TPG).,. MLK(Machine Lock). M(M02, M03 ), S, T.. 2. F1. 3.,. 4.. : PgUp.( drag In) : PgDn. ( drag Out)

79 Zoom All : ZoomAll F5. View : View F3.. XYZ, XY, YZ, ZX 4 View. () : 8.1. :,.,,,. : F7. 5. F1. F2... F ).

80 9.1 (F1) F :. : G_ : PLC, F_ :.. : : : PgUp PgDn. 5. :

81 . F2..

82 9.2 (F8), / F6, F ,.. : 1111,. : : 407.

83 9.3 (F6) Password. (X, Y, G, F, R, T, C, D).. F1, F2, TAB.

84 . Enter(Input) Key,,... S : 0~31 bit 1. Bit 16 hexadecimal). R : 0~31 bit 0 clear. Bit 16 (hexadecimal). D : 10. H : 16 (hexadecimal). Enter(Input) Key ENTER.

85 USER User. F4 USER., X5, G5, G8, X-Y X 0005 F4 User, G5,G8., USER., USER F4. USER HX clear.

86 9.4 (F5) 1. Timing Chart Servo Graph Plot. Plot Mode. / /. Trigger Rising Time. Plot Plot. Servo Graph Mode PLC Timing Chart Mode. Plot, X, Y Grid,.

87 CUR/SEL Cursor. Plot.. F1, F2,. 2. Mode (1) Servo Graph Mode Feed,..

88 (2) PLC Timing Chart Mode PLC ON/OFF Timing. Bit Data ON/OFF Data. Data.. Auto Scale, Y Scale. 3. / (F1). / Config. / (F2) Data /. / HX.

89 Auto Scale (F3) Scale. Auto Scale Config Y Zoom Step 1/5. PLC Timing Chart Mode. CUR/SEL (F4) Plot. CUR/SEL, Plot. () Plot. X Zoom (F5) Plot., CUR/SEL (). CUR/SEL. CUR/SEL Cursor Select. Cursor X- Zoom Cursor Plot. CUR/SEL.

90 Config (F6) Config. Plot,. Config HX Config.txt. Mode Select Server Graph Mode PLC Timing Chart Mode Mode. X Grid Plot X Grid. Y Grid Plot Y Grid. Y Zoom Step.. Map Name Map. Number Map. Start Bit

91 Map. bit Hex-decimal. End Bit Map. bit Hex-decimal. Scale. Plot. Use. Tirgger (F7) Tirgger. Trigger Rising Time. Tirgger Trigger. Trigger. Rising Edge, Falling Edge, Level. Value Trigger. Ch

92 Trigger Channel. Rising Time Rising Time. Rising Time. First Val Rising Time. Second Val Rising Time. (F8) Plot. Auto Scale Y Scale. Sclae Move (, )..

93 ),, 1, 2 2),,, I/O,, HMI. (TAB), F1,F2. PageUp/PageDown.,,,..,.

94 F1 (), F2 ().

95 10.2 NC. TPG DNC H/W.. G code / M code I/O In/Out. I/O ID I/O.

96 . Laser Z gap Trace Sensor. Quilting. HMI HMI(Human Machine Interface).,. ) 32, (F3, F4)..

97

98 10.3. F6. 1. Map Name. 2. Tab Index.. ENTER. 3., PS map (1 ~ 32 ).

99 (, )

100 11.1 DNC RS232C COM1 PC. 1. ( F4 ). :. COM1, COM2.. Baudrate : , Parity Bit :. ISO Even. Data Bit :. ISO 7 Bits. Stop Bit : 1. 1 Bit. EOT Code : End Of Transmission.. 0x14 (DC4).

101 ,. FLOW CTRL : / X-ON/X-OFF. ( DC1, DC3.) / EOB (End Of Block) LF. X-ON.

102 2. 1. DNC. <DNC > <DNC > 2. F3.

103 3.. ( ) NC.. NC DIR. 4.,, ENTER , F5. F8. ( X-ON.) 7. Serial (, ),. F8. Error.

104 8..

105 3. 1. DNC. <DNC > F3.

106 ENTER. (). 5. F5. F8. ( X-ON.) 6. Serial (, ), EOT ( EOT, ). Error.

107 , ( MDI ) ENTER , F6 F7, F4 F5.

108 3., / F8. ( F8.) Cycle Start.

109 12.1 (F9), (F10)., MDI MDI, DNC. 1.,,. F1 F1 F2 Offset F8 F2 F8 F3 F4 F5 F6 F7 USER DEFINE F8 F1 DNC F6 F1 F4 F5 F6 F7 F7 F8 F8

110 2. () F1 F2 F1 F2 F3 F4 F8 F3 F8 F4 F5 F1 DNC F6 F6 F1 F4 F7 USER DEFINE F8 F5 F6 F7 F7 F8

111 HX-Series.,,,,,. 2. PG :. PG : DNC, EDIT, AUTO, MDI, JOG, MPG, STEP, ZRN. 4.. ON. 5.,,.

112 12.3 (, F9). Page Down., Feed,. 1.,. (,, ) Feed, Spindle Override,. (F9) 1.

113 2. (,,,, ) Feed, Override,. G code 1 Page Down. DNC.

114 12.4 (F1). (F1)..,,. View F3. View F4. ZoomAll F5 /. F7. F8. 8.

115 12.5 (F2),, (),. 64.

116 . () (GX, GZ) (WX, WZ),. 64. (U_, W_).

117 . G54~ G59 (Shift),. 13.

118 . 120 ( ),.

119 . (F2F8) (#100~#199) (#200~#699). GLOBAL #100 ~ # (RESET POWER OFF 0 clear.) GLOBAL #200 ~ #699. (POWER OFF ), F8.

120 12.6 (F3). (F3) NC.,, Feed,.,. F8. 6.

121 . (F3F8) Simulation. F1 F2 F6 Simulation,,. View F3. View F4. ZoomAll F5 /. F7. 8.

122 12.7 (F4). (F4) System.,, 1, 2,,,, I/O,, HMI 10. (), F1 F2. 32., F3 F4. (,.) F7. 1. F8 SERCOS interface. 10.

123 12.8 (F5) DNC. (F5F1) RS 232C NC. 11.

124 . (F5F6). 3.

125 12.9 (F6). (F6F1), PgUp PgDn 10. : G_ F_ PLC. (G_00000: PLC, F_xxxxx : )

126 . (F6F4) Monitoring. 1. 1, 2,, 4,. Read-Only.. (), F1, F2.

127 . (F6F5)

128

129 .(F6F6). X-Y, G-F, R, T, C, D 6, USER., MDI F1 F2. USER USER / F4.. USER. USER USER F4..

130 (Ladder). (F6F6F7). Ladder., --., X100 11, X100.0A. 16 (HEXA-Decimal) 2. ENTER.

131 . (F6F7) HX.

132 . (F6F8).., 9. HX. (F2)

133 12.10 (F8). (F8). Shell (,, ).,,... 7.

134 . (F8F8) Cavity Core. HX NC COCA. 13.

135 12.11 HELP (SHIFT+F12)

136

137 13.1 () 64.. Shift. 1. F ENTER. 3. :

138 4. : (0-9). / 3, GX : X X. I -30 I [+(-30) ]. X 0 clear. 6. GZ : Z. GX. Z 0 clear. 7. :. 8. Z Shift : Z. Z.. Shift Z. 9. :, 0 Shift, 1.

139 N1 T0101 N2 G0 X60.Z0. N3 G1 Z-10. F0.1 N4 G0 X70. Z100. N5 T0202 N6 G0 X70. Z50., 1 GX : 0., GZ : 0. 2 shift 60 (70,50) (70,100)->(70,90) N5 (70,90) 1 (70,100) (70,50) (70,100) 2 N5 X 5mm, Z -10mm. (70,100) Z (). 3. GZ [I0] [INPUT]. 4., X () Z.

140 GX. 7. GX, [I] [ ] [INPUT].. X. ) () X X : ( - : ) GX : ( + : ) GX : Z Z : GZ :

141 13.2 () 64.,.., (U, W )..

142 13.3 G54 G59.. (G54 ~ G59). 0:/1: RESET RESET.,. Shift. 1. F G54 ~ G59 Enter. 4. G54 ~ G59, I

143 ,., I Shift, (0, 0, 0), 0 Enter. (X,Y,Z) (X,Y,Z) (X,Y,Z) G54 G59 Shift (X,Y,Z) Shift Shift

144 7. Shift Shift. Shift, (G54~G58) (G92) Shift. Shift (1) Shift (0) 0 1 Enter. G54 G54 ~ G59

145 13.4 F2, F2. Enter.

146 13.5 NC.,.. RESET clear. F2, F8.,, F8. Enter. #100 ~ # , #200 ~ #

147 14.1 / (Cavity / Core) 2.5 / 2.5 / NC. HX NC CNC. / F3. / F4,. / F5. F6 NC. NC \NC\CoCa\

148 14.2 / /. (Profile Curve) 1 ~ ~ 6..,...,, Z 1. F5 /..., Enter.

149 14.3 F4 / ) [ Pocket Milling ], NC. : X : Y : : X - Y 2) [ Pocket Milling ], NC. :.

150 3) [ X0, Y0, Z0 ]. : X. : Y. : X X. 4) Y Y Y X NC. (.) : Y : X : : X X.

151 ,,, --, -,. 1) pocket [ Core ]. : mm. :. 2). []. :. :. :.

152 3). []. :. :. :. 4). :. 1 :. :. 2 :.

153 5).. :. :. 1 :. 2 :. 6).. :. :. 1 :. 2 :

154 14.5 1) [ Cavity ] [ Core ]. :. : 2) Z-X Z - X [ 1 ] [ 2 ]. : [Y ]. 1 : X 0 [] 2 : X []

155 3) X - Y. (/.) :. : X. Y : Y Offset. : Y. :. : X-Y. 4). (/.) : X 0. : :. : :

156 14.6,, [ ] NC Code. [ Feed-Rate ], [ RPM ] 1. F5 /.. 1) [Flat End Mill] End Mill, :. FEED :. :. : 1. : Step-Over.. 2) [Ball End Mill] End Mill,..

157 :. FEED :. :. : 1. : Step-Over 3) [Null End Mill] End Mill Champer,. 1 :. 2 :. FEED :. :. : 1. : Step-Over.

158 14.7 /

159 HX - Programming Manual Machining Center (MC) HX Series(V2.x) Programming Manual for Machining Center (MC) CSCAM

160 HX - Programming Manual Machining Center (MC) (Coordinate) (Machine Coordinate) (Work-piece Coordinate) (Local Coordinate) (Relative Coordinate) (Distant To Go) (Offset) 1.2 CNC V [m/min] N [rpm] F [mm/min, mm/rev] Q [cm 3 / min ] T [ sec ] 2. (Program) (Address) (Data) (Word) (Block) (Optional Block Skip) (Program Restart) CSCAM

161 HX - Programming Manual Machining Center (MC) (G Code) 3.1 G 3.2 G 4. (Interpolation Functions) 4.1 (G00, Rapid Traverse Positioning) 4.2 (G60, Single Direction Positioning) 4.3 (G01, Linear Interpolation) (,, Chamfering) ( R, Rounding) 4.4 (G02/G03, Circular Interpolation) 4.5 (G02/G03, Helical Interpolation) 4.6 (G112/G113, Polar Coordinate Interpolation) 4.7 (G107, Cylindrical Interpolation) 4.8 (G33, Constant Lead Threading) 4.9 (G31/G31.1/G31.2/G31.3/G31.4, Skip Function) 4.10 (G37/G37.1/G37.2/G37.3/G37.4) 5. (Feed Function) 5.1 (Rapid Traverse) 5.2 (Cutting Feed) (G94, Feed per Minute) (G95, Feed per Revolution) 5.3 (Cutting Feedrate Control) (G09, Exact Stop) (G61, Exact Stop Mode) (G64, Cutting Mode) (G63, Tapping Mode) (G62, Automatic Corner Override Mode) (Internal Circular Cutting Feedrate Change) 5.4 (G04, Dwell) CSCAM

162 HX - Programming Manual Machining Center (MC) 5.5 (Automatic Acceleration / Deceleration) 6. (Reference Position) 6.1 (G28, Reference Position Return) 6.2 2,3,4 (G30, 2 nd, 3 rd, 4 th Reference Position Return) 6.3 (G29, Return from Reference Position) 6.4 (G27, Reference Position Return Check) 7. (Coordinate System) 7.1 (Machine Coordinate) (G53, Machine Coordinate System Selection) 7.2 (Work-piece Coordinate) (G92, Setting for Work-piece Coordinate System) ~6 (G54~G59, Work-piece Coordinate System) (G54~G59) (Work zero point offset setting) (Shift) (Work-piece Coordinate Shift ) 7.3 (G52, Local Coordinate System, ) 7.4 (G17, G18, G19, Plane Selection) (G90, Absolute Command) 8.2 (G91, Incremental Command) 8.3 (G15, G16, Polar Coordinates Command) 8.4 Inch / Metric (G20, G21, Inch Unit / Metric Unit) 9. (Spindle Function) 9.1 (G96, Constant Surface Speed Control) 9.2 (G97) 9.3 (G92) 10. (Tool Function) T ( ) M ( ) 11. (M Code) CSCAM

163 HX - Programming Manual Machining Center (MC) 11.1 M 11.2 M 12. (Canned Cycles) (G73 ~ G89) (G90 / G91) (G98) R (G99) (G80, Canned Cycle Cancel) / (G81, Drilling Cycle / Spot Drilling Cycle) / (G82) (G83, Peck Drilling Cycle) (G83, Peck Drilling Cycle) (G73, High-Speed Peck Drilling Cycle ) (G84) RIGID Tap (G84.2) (G74) RIGID Tap (G84.3) (G86, Boring Cycle) (G76, Fine Boring Cycle) (G87, Back Boring Cycle) (G88, Boring Cycle) (G89, Boring Cycle) (Tool Compensation) 13.1 (Tool Length Compensation) (G43, G44, G49, Tool Length Compensation) (G10, Programmable Data Input) 13.2 (Tool Diameter Compensation) (G40, G41, G42, G39, Tool Diameter Compensation) CSCAM

164 HX - Programming Manual Machining Center (MC) C type (G41,G42, Tool Diameter Compensation) 13.3 (G45~G48, Tool Offset) 14. (CUSTOM MACRO) 14.1 (Custom Macro Command) (G65) (G66 /G67) G M M T M98 G (G66) 14.2 (Custom Macro) CNC 14.3 (Custom Macro) PLANE DRILL (1 ) WHILE - ENDm 15. (Special Functions) (G10.3, High Speed Cutting Mode) (G50,G51, Scaling Function) / CSCAM

165 HX - Programming Manual Machining Center (MC) / 15.3 (G50,G51, Mirror Image) 15.4 (Coordinate Rotation) (G68, G69, Coordinate Rotation) H/W() Limit (Hardware Limit) S/W() Limit (Software Limit) S/W Limit ( G22, G23 ) (Stitch Function Mode) CSCAM

166

167

168

169 1 Coordinate

170 1.1 (Coordinate) (Machine Coordinate)

171 1.1.2 (Work-piece Coordinate) (Local Coordinate) (Relative Coordinate) (Distant To Go)

172 1.1.6 (Offset) Shift Shift

173 1.2 CNC V [m/min] V π DN = N [rpm] 1000 V N = π D F [mm/min, mm/rev]

174 F [mm/min] = N [rpm] f [mm/rev] F [mm/min] = N [rpm] [teeth/rev] f [mm/teeth] F [mm/min] = N [rpm] Q [cm 3 / min ] π 3 Fmm / rev F( mm / min) Q( Cm ) = ( ) ( Nrpm) ( ) =

175 1.2.5 T [ sec ] L T = 60 F

176

177 2.1

178 (Address)

179 2.2.2 (Data) (Word)

180 2.2.4 (Block)

181

182 (Optional Block Skip)

183 2.3.4 (Program Restart)

184

185

186 2.4.2

187 2.4.3

188

189 2.4.4

190 3 (G Code)

191 3.1 G

192

193

194 3.2 G

195 4 (Interpolation Functions) Rapid Traverse Positioning Single Direction Positioning Linear Interpolation) Circular Interpolation Helical Interpolation Polar Coordinate Interpolation Cylindrical Interpolation Constant Lead Threading Skip Function

196 4.1 (G00, Rapid Traverse Positioning)

197

198 Single Direction Positioning

199

200 4.3 (G01, Linear Interpolation) Lx Ly Lz L = Lx + Ly Lz Lx Fx F L = Ly Fy F L = Lz Fz F L =

201

202 4.3.1 (,, Chamfering)

203

204 4.3.2 ( R, Rounding)

205

206 4.4 (G02/G03, Circular Interpolation)

207

208

209

210 4.5 (G02/G03, Helical Interpolation)

211

212 Polar Coordinate Interpolation

213

214

215 Cylindrical Interpolation

216

217

218 4.8 (G33, Constant Lead Threading)

219 4.9 (G31/G31.1/G31.2/G31.3/G31.4, Skip Function)

220

221 4.10 (G37/G37.1/G37.2/G37.3/G37.4)

222

223

224 Rapid Traverse Cutting Feed Cutting Feedrate Control Dwell Automatic Acceleration / Deceleration

225

226

227

228

229

230

231

232

233 G09 / G61, G64 [ ] G64.,,,. G One Shot Modal 2 [ : G00, : G60 ]. G61 G64 [ ].

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249 µ

250 Machine Coordinate System Work-piece Coordinate System Local Coordinate System,

251

252

253

254

255

256

257 ±

258 Shift Shift. Shif Shif. G92, G54~G59. Shift Shift 0/1 1.. ( -> F2 -> F1 )

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273 G20/G21. G20/G21. PA 0. ( Metric/ Inch ) (, ) PA 374~405 Inch/Metric. 1 PA 0. 0 PA 0 Metric.

274

275

276 V = π DN 1000 N = 1000 π D V

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299 %

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325 Tool Length Compensation ( Tool Diameter Compensation Tool Offset

326 ±

327

328

329

330

331

332

333

334

335

336 α

337 α

338 α α

339

340 α

341

342 α

343 α

344

345

346

347

348

349

350 α

351 α

352 α

353

354

355

356

357

358 ± ± ± ±

359

360

361 Custom Macro Command Custom Macro Custom Macro

362

363

364

365

366 : G66 G66. G66. (G66) Main. G66 G67..

367

368 (1) G M, T Mxx M. M M ( N_ ).

369 (5) G66 G65 4. M98 G65, G66 8.

370

371

372 . O O8999. O O9999 (PA 2),. Custom Macro,.. (G65 A_ B_ )

373

374

375

376

377 #7032 = 31 i= 0 #[ i]* 2 i

378

379 #8032 = 31 i= 0 #[ i]* 2 i

380

381

382

383 G31 skip signal signal position..

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398 Scaling Function, Mirror Image Coordinate Rotation

399

400

401 F E E D smoothing F E E D

402

403

404

405 G50 G51 X_ Y_ Z_ P_ [Scaling Cancel] ON [Scaling On] G90. X_Y_Z_ G51.. 1/1000. P. G50. P, PI 108~116 (#3108~3116).,,.

406 G50 [Scaling Cancel] G51 ON [Scaling On],,.

407

408 G51 G51 (G91) (G51 ) (G90).

409

410

411

412

413

414 Ο

415

416 3378~3409 (#23378~23409). Soft Limit PM 3410~3473 (#23410~#23473). /.

417

418

419

420

421

422

423

HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM

HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) 1.4

More information

CSCAM 800S Operation Manual for MC / TC / CUT / QT Serial No. : OP

CSCAM 800S Operation Manual for MC / TC / CUT / QT Serial No. : OP CSCAM 800S Operation Manual for MC / TC / CUT / QT Serial No : OP-20141101 800S - Operation Manual MC / TC / CUT / QT 목차 1 MDI 판넬및외부 I/O 장치 ---------------------------------------------------------------------------------7

More information

歯TC프로그래밍매뉴얼

歯TC프로그래밍매뉴얼 Turning Center (TC) HX - Programming Manual Serial No. : PG-20011119 HX - Programming Manual Turning Center (TC) 1...!. 2 (Program)...19 3 (G )...33 4 (Interpolation Functions)...37 5 (Feed Function)...73

More information

Massive yet responsive turning centers without compromise. The most powerful machines in their class. 02 Powerful, Heavy Duty Turning Center Powerful, Heavy Duty Turning Center 03 PUMA 480 series PUMA

More information

Massive yet Responsive Most Powerful Machines in Their Class. 02 Heavy Duty Turning Center Heavy Duty Turning Center 03 PUMA 600/700/800 1800 r/min (PUMA 600) 45 kw [Gear Box] PUMA 600/600L/600M/600LM

More information

High Performance and Heavy Duty Turning Center Combining rigid slant bed construction with advanced technology for superior machining of middle to large sized workpieces. 2 DOOSAN Infracore Products PUMA

More information

Heavy Duty Vertical Machining Center 02 Heavy Duty Vertical Machining Center

Heavy Duty Vertical Machining Center 02 Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center 02 Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center 03 Mynx 5400 / 6500 / 7500 04 Heavy Duty Vertical

More information

Twin Spindle and Turrets for High Productivity 2 Doosan Infracore Products

Twin Spindle and Turrets for High Productivity 2 Doosan Infracore Products Twin Spindle and Turrets for High Productivity 2 Doosan Infracore Products PUMA TTseries 3 PUMA TT 2000S/MS/SY 5,000 rpm PUMA TT 2000S/MS/SY 22 kw 4,000 rpm 26 kw Perfect integral motor driven spindles.

More information

02 High Productivity Turning Center High Productivity Turning Center 03 Lynx 220 series Lynx 220A / C : 6000 / 4000 r/min Lynx 220MA[LMA] / MC[LMC] : 6000 / 4500 r/min Lynx 220LSA[LMSA] / LSC[LMSC] : 6000

More information

LEO LEO 1600 ver. KO SU 1 / 1

LEO LEO 1600 ver. KO SU 1 / 1 6 ver. KO 1803 SU 1 / 1 / / CNC 안정적인가공지원을위해 30 도경사베드구조와모든이송축에고강성롤러타입 LM 가이드를적용하였습니다. 1850mm X 175mm Z 330mm. X Z 175 mm 330 mm X Z X / Z 30 m/min 1850 mm 3.1m 2 1690 mm 은동급최대가공영역을지원합니다. 45 mm ( ) 70 kg

More information

"Global Leader of CNC Vertical lathe and turning center for the optimal solutions" -K series is a cost-effective model to achieve high turning capabil

Global Leader of CNC Vertical lathe and turning center for the optimal solutions -K series is a cost-effective model to achieve high turning capabil www.kdm-korea.co.kr Head office and Factory #154 Gang-ri, Jangma-myeon, Changnyeong-gun, Gyeongnam, Korea, 635-871 Tel : +82-55-536-356~8 Fax : +82-55-536-359 China office Rm82, No.3 Building, Lane9, Jiuxingong

More information

LEO 인치 컴팩트 터닝 센터

LEO 인치 컴팩트 터닝 센터 6인치 컴팩트 터닝 센터 / / CNC 안정적인가공지원을위해 30 도경사베드구조와모든이송축에고강성롤러타입 LM 가이드를적용하였습니다. 1850mm X 175mm Z 330mm. X Z 175 mm 330 mm X Z X / Z 30 m/min 1850 mm 3.1m 2 1690 mm 은동급최대가공영역을지원합니다. 45 mm ( ) 70 kg 0 kg 최대가공길이

More information

HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter X-axis Travel Y-axis Travel Z-axis Travel W-axis Travel Rotary Ta

HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter X-axis Travel Y-axis Travel Z-axis Travel W-axis Travel Rotary Ta HNK CNC HORIZONTAL BORING & MILLING MACHINE HBSeries The world wide leader in machine tools HNK MACHINE TOOL CO., LTD. HB SERIES HNK CNC HORIZONTAL BORING & MILLING MACHINE MODELS HB-110 Spindle Diameter

More information

SRC PLUS 제어기 MANUAL

SRC PLUS 제어기 MANUAL ,,,, DE FIN E I N T R E A L L O C E N D SU B E N D S U B M O TIO

More information

HM 1000/1250/1250W HM 1000 HM 1250 HM 1250W ver. KO SU

HM 1000/1250/1250W HM 1000 HM 1250 HM 1250W ver. KO SU 1000 1250 1250W ver. KO 160502 SU / / NC 1000/1250 W, BOX. Contents 02 04 06 07 / 10 12 15 / NC 18,,. W 1000/1250 W.. 02 / 03 / / NC 고강성의베드로높은정밀도를유지시켜줍니다. 1000 / 1250 / 1250W W. 1000 / 1250 Y X Z 1250W

More information

LCD Display

LCD Display LCD Display SyncMaster 460DRn, 460DR VCR DVD DTV HDMI DVI to HDMI LAN USB (MDC: Multiple Display Control) PC. PC RS-232C. PC (Serial port) (Serial port) RS-232C.. > > Multiple Display

More information

歯FDA6000COP.PDF

歯FDA6000COP.PDF OPERATION MANUAL AC Servo Drive FDA6000COP [OPERATION UNIT] Ver 1.0 (Soft. Ver. 8.00 ~) FDA6000C Series Servo Drive OTIS LG 1. 1.1 OPERATION UNIT FDA6000COP. UNIT, FDA6000COP,,,. 1.1.1 UP DOWN ENTER 1.1.2

More information

untitled

untitled 1... 2 System... 3... 3.1... 3.2... 3.3... 4... 4.1... 5... 5.1... 5.2... 5.2.1... 5.3... 5.3.1 Modbus-TCP... 5.3.2 Modbus-RTU... 5.3.3 LS485... 5.4... 5.5... 5.5.1... 5.5.2... 5.6... 5.6.1... 5.6.2...

More information

歯메뉴얼v2.04.doc

歯메뉴얼v2.04.doc 1 SV - ih.. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 - - - 23 24 R S T G U V W P1 P2 N R S T G U V W P1 P2 N R S T G U V W P1 P2 N 25 26 DC REACTOR(OPTION) DB UNIT(OPTION) 3 φ 220/440 V 50/60

More information

0.1-6

0.1-6 HP-19037 1 EMP400 2 3 POWER EMP400 4 5 6 7 ALARM CN2 8 9 CN3 CN1 10 24V DC CN4 TB1 11 12 Copyright ORIENTAL MOTOR CO., LTD. 2001 2 1 2 3 4 5 1.1...1-2 1.2... 1-2 2.1... 2-2 2.2... 2-4 3.1... 3-2 3.2...

More information

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged

More information

서보교육자료배포용.ppt

서보교육자료배포용.ppt 1. 2. 3. 4. 1. ; + - & (22kW ) 1. ; 1975 1980 1985 1990 1995 2000 DC AC (Ferrite) (NdFeB; ) /, Hybrid Power Thyrister TR IGBT IPM Analog Digital 16 bit 32 bit DSP RISC Dip SMD(Surface Mount Device) P,

More information

목차 제 1 장 inexio Touch Driver소개... 3 1.1 소개 및 주요 기능... 3 1.2 제품사양... 4 제 2 장 설치 및 실행... 5 2.1 설치 시 주의사항... 5 2.2 설치 권고 사양... 5 2.3 프로그램 설치... 6 2.4 하드웨

목차 제 1 장 inexio Touch Driver소개... 3 1.1 소개 및 주요 기능... 3 1.2 제품사양... 4 제 2 장 설치 및 실행... 5 2.1 설치 시 주의사항... 5 2.2 설치 권고 사양... 5 2.3 프로그램 설치... 6 2.4 하드웨 최종 수정일: 2010.01.15 inexio 적외선 터치스크린 사용 설명서 [Notes] 본 매뉴얼의 정보는 예고 없이 변경될 수 있으며 사용된 이미지가 실제와 다를 수 있습니다. 1 목차 제 1 장 inexio Touch Driver소개... 3 1.1 소개 및 주요 기능... 3 1.2 제품사양... 4 제 2 장 설치 및 실행... 5 2.1 설치 시

More information

Smart Power Scope Release Informations.pages

Smart Power Scope Release Informations.pages v2.3.7 (2017.09.07) 1. Galaxy S8 2. SS100, SS200 v2.7.6 (2017.09.07) 1. SS100, SS200 v1.0.7 (2017.09.07) [SHM-SS200 Firmware] 1. UART Command v1.3.9 (2017.09.07) [SHM-SS100 Firmware] 1. UART Command SH모바일

More information

/ / CNC TW2100-GL TW series TW 6 / 8 / 10 / 12, 2 / 2.. TW series

/ / CNC TW2100-GL TW series TW 6 / 8 / 10 / 12, 2 / 2.. TW series TW series 6/8/10/12 2- TW2100/M TW2100/M-GL TW2600/M TW2600/M-GL ver. KO 180330 SU 1 / 1 / / CNC TW2100-GL TW series TW 6 / 8 / 10 / 12, 2 / 2.. TW series Contents 02 04 06 09 / 11 12 23 / CNC 26 TW2600-GL200

More information

T100MD+

T100MD+ User s Manual 100% ) ( x b a a + 1 RX+ TX+ DTR GND TX+ RX+ DTR GND RX+ TX+ DTR GND DSR RX+ TX+ DTR GND DSR [ DCE TYPE ] [ DCE TYPE ] RS232 Format Baud 1 T100MD+

More information

DVF 5000 Ø500mm 5

DVF 5000 Ø500mm 5 Ø500mm 5 / / NC 5 5,. 5. Contents 02 04 07 08 / 10 12 15 / NC 18 & 5 12000/18000 r/min - 12000 r/min() - 18000 r/min( type) Ø500mm 2 tilting table ( : Ø630mm) - 400kg Easy access to machine (AWC) & ( :

More information

대칭형 공작물을 위한 양두 보링 머신 02

대칭형 공작물을 위한 양두 보링 머신 02 대칭형 공작물을 위한 양두 보링머신 대칭형 공작물을 위한 양두 보링 머신 02 DBD series는 동심 보링 가공에 적합한 양두보링 스핀들을 보유하여 대칭형 긴 공작물의 양방향 동시가공으로 고정밀 고생산성을 확보하였으며 공작물의 크기에 따라 테이블의 길이 확장이 가능합니다. 03 고강성 기계구조 테이블 LM 방식의 Table Moving 채택으로 빠른 이송속도

More information

/ / NC VM series VM series. VM

/ / NC VM series VM series. VM VM series VM series VM 750 (L) VM 960 (L) VM 1260 ver. KO 160712 SU / / NC VM series VM series. VM 7 12.. Contents 02 04 08 09 / 11 14 20 / NC 22 7~12 VM 750 (L) / VM 960 (L) / VM 1260 2 () Gear Type 6000

More information

한글사용설명서

한글사용설명서 ph 2-Point (Probe) ph (Probe) ON/OFF ON ph ph ( BUFFER ) CAL CLEAR 1PT ph SELECT BUFFER ENTER, (Probe) CAL 1PT2PT (identify) SELECT BUFFER ENTER, (Probe), (Probe), ph (7pH)30 2 1 2 ph ph, ph 3, (,, ) ON

More information

슬라이드 1

슬라이드 1 사용 전에 사용자 주의 사항을 반드시 읽고 정확하게 지켜주시기 바랍니다. 사용설명서의 구성품 형상과 색상은 실제와 다를 수 있습니다. 사용설명서의 내용은 제품의 소프트웨어 버전이나 통신 사업자의 사정에 따라 다를 수 있습니다. 본 사용설명서는 저작권법에 의해 보호를 받고 있습니다. 본 사용설명서는 주식회사 블루버드소프트에서 제작한 것으로 편집 오류, 정보 누락

More information

s SINUMERIK 840C Service and User Manual DATA SAVING & LOADING & & /

s SINUMERIK 840C Service and User Manual DATA SAVING & LOADING & & / SINUMERIK 840C Service and Uer Manual DATA SAVING & LOADING & & / / NC, RS232C /. NC NC / Computer link () Device ( )/PC / / Print erial Data input RS232C () Data output Data management FLOPPY DRIVE, FLOPPY

More information

MAX+plus II Getting Started - 무작정따라하기

MAX+plus II Getting Started - 무작정따라하기 무작정 따라하기 2001 10 4 / Version 20-2 0 MAX+plus II Digital, Schematic Capture MAX+plus II, IC, CPLD FPGA (Logic) ALTERA PLD FLEX10K Series EPF10K10QC208-4 MAX+plus II Project, Schematic, Design Compilation,

More information

4 CD Construct Special Model VI 2 nd Order Model VI 2 Note: Hands-on 1, 2 RC 1 RLC mass-spring-damper 2 2 ζ ω n (rad/sec) 2 ( ζ < 1), 1 (ζ = 1), ( ) 1

4 CD Construct Special Model VI 2 nd Order Model VI 2 Note: Hands-on 1, 2 RC 1 RLC mass-spring-damper 2 2 ζ ω n (rad/sec) 2 ( ζ < 1), 1 (ζ = 1), ( ) 1 : LabVIEW Control Design, Simulation, & System Identification LabVIEW Control Design Toolkit, Simulation Module, System Identification Toolkit 2 (RLC Spring-Mass-Damper) Control Design toolkit LabVIEW

More information

untitled

untitled R&S Power Viewer Plus For NRP Sensor 1.... 3 2....5 3....6 4. R&S NRP...7 -.7 - PC..7 - R&S NRP-Z4...8 - R&S NRP-Z3... 8 5. Rohde & Schwarz 10 6. R&S Power Viewer Plus.. 11 6.1...12 6.2....13 - File Menu...

More information

Orcad Capture 9.x

Orcad Capture 9.x OrCAD Capture Workbook (Ver 10.xx) 0 Capture 1 2 3 Capture for window 4.opj ( OrCAD Project file) Design file Programe link file..dsn (OrCAD Design file) Design file..olb (OrCAD Library file) file..upd

More information

PRO1_09E [읽기 전용]

PRO1_09E [읽기 전용] Siemens AG 1999 All rights reserved File: PRO1_09E1 Information and - ( ) 2 3 4 5 Monitor/Modify Variables" 6 7 8 9 10 11 CPU 12 Stop 13 (Forcing) 14 (1) 15 (2) 16 : 17 : Stop 18 : 19 : (Forcing) 20 :

More information

B _01_M_Korea.indb

B _01_M_Korea.indb DDX7039 B64-3602-00/01 (MV) SRC... 2 2 SRC % % % % 1 2 4 1 5 4 5 2 1 2 6 3 ALL 8 32 9 16:9 LB CD () : Folder : Audio fi SRC 0 0 0 1 2 3 4 5 6 3 SRC SRC 8 9 p q w e 1 2 3 4 5 6 7 SRC SRC SRC 1 2 3

More information

untitled

untitled X-Ray FLUORESCENCE NON-DESSTRUCTIVE & NON-CONTAC COATING THICKNESS TESTER EX-3000 Ex WIN Ver.1.00 INSTRUCTION MANUAL ELEC FINE INSTRUMENTS CO., LTD 2-31-5 CHUO, NAKANO-KU, TOKYO, JAPAN PHONE : (03) 3365-4411

More information

Manufacturing6

Manufacturing6 σ6 Six Sigma, it makes Better & Competitive - - 200138 : KOREA SiGMA MANAGEMENT C G Page 2 Function Method Measurement ( / Input Input : Man / Machine Man Machine Machine Man / Measurement Man Measurement

More information

untitled

untitled CLEBO PM-10S / PM-10HT Megapixel Speed Dome Camera 2/39 3/39 4/39 5/39 6/39 7/39 8/39 ON ON 1 2 3 4 5 6 7 8 9/39 ON ON 1 2 3 4 10/39 ON ON 1 2 3 4 11/39 12/39 13/39 14/39 15/39 Meg gapixel Speed Dome Camera

More information

Microsoft Word - Installation and User Manual_CMD V2.2_.doc

Microsoft Word - Installation and User Manual_CMD V2.2_.doc CARDMATIC CMD INSTALLATION MANUAL 씨앤에이씨스템(C&A SYSTEM Co., Ltd.) 본사 : 서울특별시 용산구 신계동 24-1(금양빌딩 2층) TEL. (02)718-2386( 代 ) FAX. (02) 701-2966 공장/연구소 : 경기도 고양시 일산동구 백석동 1141-2 유니테크빌 324호 TEL. (031)907-1386

More information

EM300_Manual.indd

EM300_Manual.indd 보증서 재중 (WITH WARRANTY CARD) EM30020100702 준 비(안전을 위한 주의사항) 안전을 위한 주의사항 샤프 전자사전을 구입해 주셔서 대단히 감사합니다. 안전하게 기기를 사용하기 위해 안전을 위한 주의사항을 반드시 읽어 주십시오. TFT 컬러LCD에 관하여 TFT 컬러 LCD는 매우 정밀한 기술로 만들어졌습니다. 화면에서 밝거나 어두운

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 ........................... ½ ¼ ½ ¾ ................................................ ...........................................................................

More information

# KM

# KM PARTS BOOK 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER 1-NEEDLE, NEEDLE FEED LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER MODEL KM-506 SERIES KM-506-7S 1-NEEDLE, STRAIGHT LOCK-STITCH

More information

10X56_NWG_KOR.indd

10X56_NWG_KOR.indd 디지털 프로젝터 X56 네트워크 가이드 이 제품을 구입해 주셔서 감사합니다. 본 설명서는 네트워크 기능 만을 설명하기 위한 것입니다. 본 제품을 올바르게 사 용하려면 이 취급절명저와 본 제품의 다른 취급절명저를 참조하시기 바랍니다. 중요한 주의사항 이 제품을 사용하기 전에 먼저 이 제품에 대한 모든 설명서를 잘 읽어 보십시오. 읽은 뒤에는 나중에 필요할 때

More information

대경테크종합카탈로그

대경테크종합카탈로그 The Series Pendulum Impact 601 & 602 Analog Tester For Regular DTI-602B (Izod) DTI-601 (Charpy) DTI-602A (Izod) SPECIFICATIONS Model DTI-601 DTI-602 Type Charpy for plastics lzod for plastics Capacity

More information

DioPen 6.0 사용 설명서

DioPen 6.0 사용 설명서 1. DioPen 6.0...1 1.1...1 DioPen 6.0...1...1...2 1.2...2...2...13 2. DioPen 6.0...17 2.1 DioPen 6.0...17...18...20...22...24...25 2.2 DioPen 6.0...25 DioPen 6.0...25...25...25...25 (1)...26 (2)...26 (3)

More information

TEL: 042-863-8301~3 FAX: 042-863-8304 5 6 6 6 6 7 7 8 8 9 9 10 10 10 10 10 11 12 12 12 13 14 15 14 16 17 17 18 1 8 9 15 1 8 9 15 9. REMOTE 9.1 Remote Mode 1) CH Remote Flow Set 0 2) GMate2000A

More information

#KM-350AB..

#KM-350AB.. PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PME-051121 MODEL FOR THIN MATERIAL KM-350A-7S 1-NEEDLE, NEEDLE

More information

PCServerMgmt7

PCServerMgmt7 Web Windows NT/2000 Server DP&NM Lab 1 Contents 2 Windows NT Service Provider Management Application Web UI 3 . PC,, Client/Server Network 4 (1),,, PC Mainframe PC Backbone Server TCP/IP DCS PLC Network

More information

DDX4038BT DDX4038BTM DDX4038 DDX4038M 2010 Kenwood Corporation All Rights Reserved. LVT A (MN)

DDX4038BT DDX4038BTM DDX4038 DDX4038M 2010 Kenwood Corporation All Rights Reserved. LVT A (MN) DDX4038BT DDX4038BTM DDX4038 DDX4038M 2010 Kenwood Corporation All Rights Reserved. LVT2201-002A (MN) 2 3 [ ] CLASS 1 LASER PRODUCT 4 1 2 Language AV Input R-CAM Interrupt Panel Color Preout

More information

untitled

untitled CAN BUS RS232 Line Ethernet CAN H/W FIFO RS232 FIFO IP ARP CAN S/W FIFO TERMINAL Emulator COMMAND Interpreter ICMP TCP UDP PROTOCOL Converter TELNET DHCP C2E SW1 CAN RS232 RJ45 Power

More information

CL100B_manual_kor_m.0.2.indd

CL100B_manual_kor_m.0.2.indd ULTIMATE SAMRT CAR BLACK BOX BLACKSYS CL-100B USER MANUAL 2CH Full HD Car DVR with brilliant image Simultaneous recording of front with Full HD resolution (1920x1080, 25fps) and rearview with HD resolution

More information

B _00_Ko_p1-p51.indd

B _00_Ko_p1-p51.indd KOS-V000 B64-797-00/00 (MV) KOS-V000 설명서를 보는 방법 이 설명서에서는 삽입된 그림을 통해 작동 방법을 설명합니다. 이 설명서에 나타낸 화면과 패널은 작동 방법을 자세히 설명하는 데 이용되는 예입니다. 따라서 실제 화면이나 패널과 다르거나 일부 디 스플레이 패턴이 다를 수도 있습니다. 찾기 모드 방송국 선택 설정. TUNER

More information

Plc\PLC-p

Plc\PLC-p GP GP-PRO/PB III for Windows Ver. 4.0] (1) [ GP-PRO/PB III for Windows Ver. 4.0] ( Digital Electronic (2) (Readme.txt files ) Copyright 2000 Digital Electronics Corporation. All rights reserved. Digital

More information

Microsoft Word - FS_ZigBee_Manual_V1.3.docx

Microsoft Word - FS_ZigBee_Manual_V1.3.docx FirmSYS Zigbee etworks Kit User Manual FS-ZK500 Rev. 2008/05 Page 1 of 26 Version 1.3 목 차 1. 제품구성... 3 2. 개요... 4 3. 네트워크 설명... 5 4. 호스트/노드 설명... 6 네트워크 구성... 6 5. 모바일 태그 설명... 8 6. 프로토콜 설명... 9 프로토콜 목록...

More information

Remote UI Guide

Remote UI Guide Remote UI KOR Remote UI Remote UI PDF Adobe Reader/Adobe Acrobat Reader. Adobe Reader/Adobe Acrobat Reader Adobe Systems Incorporated.. Canon. Remote UI GIF Adobe Systems Incorporated Photoshop. ..........................................................

More information

11111111111111111111111111111111111111111111111111111111111111111111111111111

11111111111111111111111111111111111111111111111111111111111111111111111111111 서울시 금천구 가산동 448 대륭테크노타운 3차 301호 전화 : (02)838-0760 팩스 : (02)838-0782 메일 : support@gyrosoft.co.kr www.gyrosoft.co.kr www.gyro3d.com 매뉴얼 버전 : 1.00 (발행 2008.6.1) 이 설명서의 어느 부분도 자이로소프트(주)의 승인 없이 일부 또는 전부를 복제하여

More information

untitled

untitled Huvitz Digital Microscope HDS-5800 Dimensions unit : mm Huvitz Digital Microscope HDS-5800 HDS-MC HDS-SS50 HDS-TS50 SUPERIORITY Smart Optical Solutions for You! Huvitz Digital Microscope HDS-5800 Contents

More information

김기남_ATDC2016_160620_[키노트].key

김기남_ATDC2016_160620_[키노트].key metatron Enterprise Big Data SKT Metatron/Big Data Big Data Big Data... metatron Ready to Enterprise Big Data Big Data Big Data Big Data?? Data Raw. CRM SCM MES TCO Data & Store & Processing Computational

More information

목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4 시작하시기 전에

목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4 시작하시기 전에 XDJAERO http://pioneerdj.com/support/ http://rekordbox.com/ 목차 본 취급설명서의 사용법 본 사용설명서에서는 제품상에 표시된 채널명 및 버튼명, 소프트웨어의 메뉴명 등이 대괄호 ([ ]) 안에 표시됩니 (예: [MASTER] 채널, [ON/ OFF], [File] 메뉴) 시작하시기 전에 특징...3 부속품...4

More information

DRB1598A

DRB1598A DDJ-S1 http://www.prodjnet.com/support/ 본 파이오니어 제품을 구입해 주셔서 감사드립 본 취급설명서를 주의깊게 읽으시고, 갖고 계신 모델의 올바른 조작법을 익히십시오. 본 취급설 명서를 읽으신 후, 안전한 곳에 보관하셔서 나중에 참고하십시오. 일부 국가 또는 지역의 경우, 전원 플러그 및 콘센트의 형태가 설명의 그림에 보여지는

More information

PRO1_04E [읽기 전용]

PRO1_04E [읽기 전용] Siemens AG 1999 All rights reserved File: PRO1_04E1 Information and S7-300 2 S7-400 3 EPROM / 4 5 6 HW Config 7 8 9 CPU 10 CPU : 11 CPU : 12 CPU : 13 CPU : / 14 CPU : 15 CPU : / 16 HW 17 HW PG 18 SIMATIC

More information

歯기구학

歯기구학 1 1.1,,.,. (solid mechanics)., (kinematics), (statics), (kinetics). ( d y n a m i c s ).,,. ( m e c h a n i s m ). ( l i n k a g e ) ( 1.1 ), (pin joint) (revolute joint) (prismatic joint) ( 1.2 ) (open

More information

,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law),

,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), 1, 2, 3, 4, 5, 6 7 8 PSpice EWB,, ,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), ( ),,,, (43) 94 (44)

More information

2 x10 목 차 1. 일반 정보 1. 점검 사항 2. 주의 및 관리 3. 방수 4. 배터리 충전하기 2. 순토 X10 사용 방법 1. 화면과 버튼 (1) 모드 표시 (2) 배터리 용량 표시 (3) 알람 심볼 (4) GPS 수신 표시 2. 메뉴 (1) 기본 메뉴 구조

2 x10 목 차 1. 일반 정보 1. 점검 사항 2. 주의 및 관리 3. 방수 4. 배터리 충전하기 2. 순토 X10 사용 방법 1. 화면과 버튼 (1) 모드 표시 (2) 배터리 용량 표시 (3) 알람 심볼 (4) GPS 수신 표시 2. 메뉴 (1) 기본 메뉴 구조 SUUNTO X10 한글 사용 설명서 x 이 사용 설명서는 순토 X10 패키지에 들어있는 영문설명서 부분을 한 글화 한 것입니다. x 영문을 한글로 번역하는 과정에서 기술적인 전문성의 결여로 인해 발생 할 수 있는 오역의 가능성이 있음을 알려드리며, 사용 시 이 점을 감안하 여 주실 것을 당부 드립니다. x 보다 자세한 기술적인 설명에 대한 지원이 필요하신

More information

#KM-250š

#KM-250š PARTS BOOK FOR 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE SERIES KM-250AU-7S KM-250AU-7N KM-250A-7S KM-250A-7N KM-250B-7S KM-250B-7N KM-250BH-7S KM-250BH-7N KM-250BL-7S KM-250BL-7N KM-250AU KM-250A KM-250B

More information

PRO1_02E [읽기 전용]

PRO1_02E [읽기 전용] Siemens AG 1999 All rights reserved File: PRO1_02E1 Information and 2 STEP 7 3 4 5 6 STEP 7 7 / 8 9 10 S7 11 IS7 12 STEP 7 13 STEP 7 14 15 : 16 : S7 17 : S7 18 : CPU 19 1 OB1 FB21 I10 I11 Q40 Siemens AG

More information

개요 AXSR5 레코더에 연결 시 NEXFS700 전용 RAW 포맷으로 변환되어 AXSR5 에서 녹화됩니다(PMWF55, F65 용 RAW 포맷과 다름). 또한 이 제품의 간단한 플레이백 기능을 사용하여 AXSR5에서 레코딩 된 비디오를 볼 수 있습니다. 플레이백 되는

개요 AXSR5 레코더에 연결 시 NEXFS700 전용 RAW 포맷으로 변환되어 AXSR5 에서 녹화됩니다(PMWF55, F65 용 RAW 포맷과 다름). 또한 이 제품의 간단한 플레이백 기능을 사용하여 AXSR5에서 레코딩 된 비디오를 볼 수 있습니다. 플레이백 되는 446648911(1) 휴대용 메모리 레코더 인터페이스 유닛 사용 설명서 HXRIFR5 개요 AXSR5 레코더에 연결 시 NEXFS700 전용 RAW 포맷으로 변환되어 AXSR5 에서 녹화됩니다(PMWF55, F65 용 RAW 포맷과 다름). 또한 이 제품의 간단한 플레이백 기능을 사용하여 AXSR5에서 레코딩 된 비디오를 볼 수 있습니다. 플레이백 되는 영상은

More information

(Asynchronous Mode) ( 1, 5~8, 1~2) & (Parity) 1 ; * S erial Port (BIOS INT 14H) - 1 -

(Asynchronous Mode) ( 1, 5~8, 1~2) & (Parity) 1 ; * S erial Port (BIOS INT 14H) - 1 - (Asynchronous Mode) - - - ( 1, 5~8, 1~2) & (Parity) 1 ; * S erial Port (BIOS INT 14H) - 1 - UART (Univ ers al As y nchronous Receiver / T rans mitter) 8250A 8250A { COM1(3F8H). - Line Control Register

More information

This page left blank intentionally

This page left blank intentionally User s Manual Manuel d utilisation Bedienungsanleitung Manual de usuario Manuale d'istruzioni Gebruiksaanwijzing Instruções do Proprietário Bruksanvisningens Руководство пользователя Regulatory models:

More information

PUMA VTS 시리즈는넓은가공영역과강력한중절삭능력을보유하고있어 다양한대형소재의생산성향상에탁월한능력을발휘합니다. 02

PUMA VTS 시리즈는넓은가공영역과강력한중절삭능력을보유하고있어 다양한대형소재의생산성향상에탁월한능력을발휘합니다. 02 PUMA VTS series PUMA VTS series PUMA VTS1214 PUMA VTS1214M PUMA VTS1620 PUMA VTS1620M ver. KO 160822 SU PUMA VTS 시리즈는넓은가공영역과강력한중절삭능력을보유하고있어 다양한대형소재의생산성향상에탁월한능력을발휘합니다. 02 1 견고한구조 PUMA VTS 시리즈는박스가이드웨이적용으로내구성이향상되었으며,

More information

PRO1_16E [읽기 전용]

PRO1_16E [읽기 전용] MPI PG 720 Siemens AG 1999 All rights reserved File: PRO1_16E1 Information and MPI 2 MPI 3 : 4 GD 5 : 6 : 7 GD 8 GD 9 GD 10 GD 11 : 12 : 13 : 14 SFC 60 SFC 61 15 NETPRO 16 SIMATIC 17 S7 18 1 MPI MPI S7-300

More information

MR-3000A-MAN.hwp

MR-3000A-MAN.hwp ITS Field Emulator for Traffic Local Controller [ MR-3000A ] User's Manual MORU Industrial Systems. www.moru.com - 1 - 1. 개요 MR-3000A는교통관제시스템에있어서현장용교통신호제어기의개발, 신호제어알고리즘의개발및검증, 교통신호제어기생산 LINE에서의자체검사수단등으로활용될수있도록개발된물리적모의시험장치이다.

More information

APOGEE Insight_KR_Base_3P11

APOGEE Insight_KR_Base_3P11 Technical Specification Sheet Document No. 149-332P25 September, 2010 Insight 3.11 Base Workstation 그림 1. Insight Base 메인메뉴 Insight Base Insight Insight Base, Insight Base Insight Base Insight Windows

More information

歯DCS.PDF

歯DCS.PDF DCS 1 DCS - DCS Hardware Software System Software & Application 1) - DCS System All-Mighty, Module, ( 5 Mbps ) Data Hardware : System Console : MMI(Man-Machine Interface), DCS Controller :, (Transmitter

More information

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Vertical Probe Card for Wafer Test Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Life Time: 500000

More information

2005 2004 2003 2002 2001 2000 Security Surveillance Ubiquitous Infra Internet Infra Telematics Security Surveillance Telematics Internet Infra Solutions Camera Site (NETWORK) Monitoring & Control

More information

Solaris Express Developer Edition

Solaris Express Developer Edition Solaris Express Developer Edition : 2008 1 Solaris TM Express Developer Edition Solaris OS. Sun / Solaris, Java, Web 2.0,,. Developer Solaris Express Developer Edition System Requirements. 768MB. SPARC

More information

CD-RW_Advanced.PDF

CD-RW_Advanced.PDF HP CD-Writer Program User Guide - - Ver. 2.0 HP CD-RW Adaptec Easy CD Creator Copier, Direct CD. HP CD-RW,. Easy CD Creator 3.5C, Direct CD 3.0., HP. HP CD-RW TEAM ( 02-3270-0803 ) < > 1. CD...3 CD...5

More information

B _02_M_Ko.indd

B _02_M_Ko.indd DNX SERIES DNX560 DNX560M DDX SERIES DDX506 DDX506M B64-467-00/0 (MW) DNX560/DNX560M/DDX506/DDX506M 4 DNX560/DNX560M/DDX506/DDX506M NAV TEL AV OUT % % % % CD () : Folder : Audio fi 5 6 DNX560/DNX560M/DDX506/DDX506M

More information

(3) () () LOSS LOSS LOSS LOSS (4) = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100

(3) () () LOSS LOSS LOSS LOSS (4) = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 1.,.. 2. (1) Flow + ( ) (2) Flow Flow (LINE) ) (LINE) ModelC/T LOSS DAT A Check Sheet ((%) (T PM) (LOSS) - (3) () () LOSS LOSS LOSS LOSS (4) = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100 = 100

More information

<4D6963726F736F667420576F7264202D20C1A6C7B0BBE7BEE7BCAD2D5143203532384B205FC8A8C6E4C0CCC1F65F2E646F63>

<4D6963726F736F667420576F7264202D20C1A6C7B0BBE7BEE7BCAD2D5143203532384B205FC8A8C6E4C0CCC1F65F2E646F63> Universal Testing Machines Excellent manufacturing technology Made in Taiwan & Japan (NTS_Technical) from cometech world markets QC-528K 대 하 교 역 상 사 제 품 사 양 서 Force gauge of Motorized Stand Testing Machine

More information

인켈(국문)pdf.pdf

인켈(국문)pdf.pdf M F - 2 5 0 Portable Digital Music Player FM PRESET STEREOMONO FM FM FM FM EQ PC Install Disc MP3/FM Program U S B P C Firmware Upgrade General Repeat Mode FM Band Sleep Time Power Off Time Resume Load

More information

목차 1. 개요... 3 2. USB 드라이버 설치 (FTDI DRIVER)... 4 2-1. FTDI DRIVER 실행파일... 4 2-2. USB 드라이버 확인방법... 5 3. DEVICE-PROGRAMMER 설치... 7 3-1. DEVICE-PROGRAMMER

목차 1. 개요... 3 2. USB 드라이버 설치 (FTDI DRIVER)... 4 2-1. FTDI DRIVER 실행파일... 4 2-2. USB 드라이버 확인방법... 5 3. DEVICE-PROGRAMMER 설치... 7 3-1. DEVICE-PROGRAMMER < Tool s Guide > 목차 1. 개요... 3 2. USB 드라이버 설치 (FTDI DRIVER)... 4 2-1. FTDI DRIVER 실행파일... 4 2-2. USB 드라이버 확인방법... 5 3. DEVICE-PROGRAMMER 설치... 7 3-1. DEVICE-PROGRAMMER 실행파일... 7 4. DEVICE-PROGRAMMER 사용하기...

More information

PRO1_01E [읽기 전용]

PRO1_01E [읽기 전용] PCS 7 Software NET PC WinCC HMI DP Controller Siemens AG 1999 All rights reserved File: PRO1_01E1 2 S7-200 3 S7-200: 4 S7-200: CPU 5 S7-300 6 S7-300: 7 S7-300: CPU 8 S7-400 9 S7-400: 10 S7-400: CPU (1)

More information

untitled

untitled CAN BUS RS232 Line CAN H/W FIFO RS232 FIFO CAN S/W FIFO TERMINAL Emulator COMMAND Interpreter PROTOCOL Converter CAN2RS232 Converter Block Diagram > +- syntax

More information

Microsoft Word - SMB-63-2_KR_.doc

Microsoft Word - SMB-63-2_KR_.doc 보충 설명서 압소덱스 AX9000TS/TH-U3 (PROFIBUS-DP 사양) SMB-63K-2 머리글 이번에 당사의 압소덱스를 선정해 주셔서 대단히 감사합니다. 압소덱스는 일반 산업용 조립 기계나 검사 기계 등의 간헐 작동 턴테이블 등을 유연하고 정밀도 높게 구동하기 위해 개발된 다이렉트 드라이브 인덱 스 유닛입니다. 본 설명서는 압소덱스 AX9000TS/TH(PROFIBUS-DP

More information

LCD Monitor

LCD Monitor LCD MONITOR quick start guide 400FP-2 460FP-2 400FPn-2 460FPn-2 ii Floor standing type) Note LCD Display MagicInfo Software CD MagicInfo Manual CD (FPn-2.) (AAA X 2) (FPn-2.) BNC to RCA (46.) D-Sub DVI

More information

YD-3533.xls

YD-3533.xls Y D - 3 5 3 3 사 용 설 명 서 78, Daechun-Dong, Dalseo-gu, Daegu, KOREA TEL : +8-53-585-56(Main) FAX : +8-53-585-788 http://www.setech.co.kr e-mail : setech@setech.co.kr 페이지 . 특징 당사의 제품을 사용하여 주셨어 감사하며, 사용중 혹시라도

More information

DCR-HC15

DCR-HC15 3-089-848-42(1) DCR-HC15 2004 Sony Corporation 2 1 2 3 4 5 6 7 8 1 5 6 2 7 3 4 8 3 c 4 5 6 c 7 3 2 v 1 Z 2 3 1 2 8 1 2 3 4 1 2 3 9 10 [a] [b] [c] [d] [a] [b] [c] [d] 11 (1) (2) (1) (2) 12 (1) (2) v (3)

More information

WIDIN - Toolholding Catalogue.pdf

WIDIN - Toolholding Catalogue.pdf T CH CHUC UCK K 60 ER Strong Torque Power ER Chuck have strong torque power. Slim designed ER Nut were minimized an interruption to workpiece. If using Carbide Drill and coated drill, it can be improve

More information

VZ94-한글매뉴얼

VZ94-한글매뉴얼 KOREAN / KOREAN VZ9-4 #1 #2 #3 IR #4 #5 #6 #7 ( ) #8 #9 #10 #11 IR ( ) #12 #13 IR ( ) #14 ( ) #15 #16 #17 (#6) #18 HDMI #19 RGB #20 HDMI-1 #21 HDMI-2 #22 #23 #24 USB (WLAN ) #25 USB ( ) #26 USB ( ) #27

More information

Microsoft Word - 1-차우창.doc

Microsoft Word - 1-차우창.doc Journal of the Ergonomics Society of Korea Vol. 28, No. 2 pp.1-8, May 2009 1 하이브리드 환경하의 인간기계시스템 제어실 평가에 관한 연구 차 우 창 김 남 철 금오공과대학교 산업시스템공학과 A Study of the Evaluation for the Control Room in Human Machine

More information

콤팩트한모듈타입 Controller Analog/Digital Servo interface 표준 Network interface 지원 (DeviceNet, Profibus, SERCOS, MechatroLink-II) G-Series 고정밀모션제어기술과고성능시퀀스제어기

콤팩트한모듈타입 Controller Analog/Digital Servo interface 표준 Network interface 지원 (DeviceNet, Profibus, SERCOS, MechatroLink-II) G-Series 고정밀모션제어기술과고성능시퀀스제어기 http://www.cscam.co.kr CNC 의고정밀모션제어기술과고성능시퀀스제어기술이결합된모듈타입의고성능 PAC (Programmble Automation Controller) Programmable Automation Controller G-S200 G-S400 G-S500 User-friendly Interface High Precision Motion

More information

hwp

hwp 100% Concentration rate (%) 95% 90% 85% 80% 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 Time (min) Control box of RS485 Driving part Control trigger Control box of driving car Diaphragm Lens of camera Illumination

More information

안전을 위한 주의사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 미리 막기 위한 내용이므로 반드시 지켜 주시기 바랍니다. 2 경고 설치 관련 지시사항을 위반했을 때 심각한 상해가 발생하거나 사망에 이를 가능성이 있는 경우 설치하기 전에 반드시 본 기기의 전원을

안전을 위한 주의사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 미리 막기 위한 내용이므로 반드시 지켜 주시기 바랍니다. 2 경고 설치 관련 지시사항을 위반했을 때 심각한 상해가 발생하거나 사망에 이를 가능성이 있는 경우 설치하기 전에 반드시 본 기기의 전원을 Digital Video Recorder 간편설명서 XD3316 안전을 위한 주의사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 미리 막기 위한 내용이므로 반드시 지켜 주시기 바랍니다. 2 경고 설치 관련 지시사항을 위반했을 때 심각한 상해가 발생하거나 사망에 이를 가능성이 있는 경우 설치하기 전에 반드시 본 기기의 전원을 차단하고, 전원 플러그를 동시에

More information

2 Mitsubishi FX Series Computer Link MITSUBISHI FX SERIES COMPUTER LINK 시스템구성 시스템설정 사용예 사용예 사용예

2 Mitsubishi FX Series Computer Link MITSUBISHI FX SERIES COMPUTER LINK 시스템구성 시스템설정 사용예 사용예 사용예 Mitsubishi FX Series Computer Link 2 Mitsubishi FX Series Computer Link MITSUBISHI FX SERIES COMPUTER LINK... 1 1. 시스템구성... 3 2. 시스템설정... 4 3. 사용예... 6 3.1. 사용예 1... 6 3.2. 사용예 2... 9 4. 케이블연결도... 13 4.1.

More information

강의10

강의10 Computer Programming gdb and awk 12 th Lecture 김현철컴퓨터공학부서울대학교 순서 C Compiler and Linker 보충 Static vs Shared Libraries ( 계속 ) gdb awk Q&A Shared vs Static Libraries ( 계속 ) Advantage of Using Libraries Reduced

More information