슬라이드 1

Size: px

Start display at page:

Download "슬라이드 1"

재모 신
6 years ago
Views:

1 임베디드시스템개론 : Arduino 활용 Lecture #7: Piezzo Buzzer & Flex Sensor 활용 by 김영주

2 강의목차 Piezzo Buzzer 개요 Tone 출력실험 Piezzo Sensor 실험 Flex Sensor 개요 Flex Sensor 활용실험 2

Piezzo Buzzer (1) 개요 Piezzo Buzzers Piezoelectonics piezein is greek for squeeze Some crystals, when squeezed, make a spark Spark a quartz crystal, and it flexes Piezo buzzers use this to make sound

3 Piezzo Buzzer (1) 개요 Piezzo Buzzers Piezoelectonics piezein is greek for squeeze Some crystals, when squeezed, make a spark Spark a quartz crystal, and it flexes Piezo buzzers use this to make sound flex something back and forth, it moves air Piezo buzzers don t have quartz crystals, but instead a kind of ceramic that also exhibits piezoelectric properties Two wires, red & black 극성 : black=ground Apply an oscillating voltage to make a noise The buzzer case supports the piezzo element and has resonant cavity for sound 3

4 Piezzo Buzzer (2) 개요 Piezzo Buzzers Piezzo element 흰색디스크 인가되는전압이진동하면디스크가진동하여소리를생성역으로디스크를진동하면전압이생성 센서로활용 4

5 멜로디출력실험 (1) 실험개요 Piezzo buzzer 를이용하여기본적인멜로디를출력한다. 출력할계명을모니터에서문자로입력받고, 해당된계명을출력하도록한다. 사전요구사항 Piezzo buzzer 의동작원리를이해한다. 계명별로고유의주파수를가지며, 이를이용하여음을생성하는방법을이해한다. 5

6 멜로디출력실험 (2) 회로구성 6

7 멜로디출력실험 (3) 아두이노프로그램 멜로디출력 7 /* Melody * This example uses a piezo speaker to play melodies. It sends * a square wave of the appropriate frequency to the piezo, generating * the corresponding tone. * * The calculation of the tones is made following the mathematical * operation: timehigh = period / 2 = 1 / (2 * tonefrequency) * where the different tones are described as in the table: * * note frequency period timehigh * c 261 Hz * d 294 Hz * e 329 Hz * f 349 Hz * g 392 Hz * a 440 Hz * b 493 Hz * C 523 Hz * * */

8 멜로디출력실험 (4) 아두이노프로그램 멜로디출력 int speakerpin = 7; int length = 8; // the number of notes char notes[] = "cdefgabc "; // a space represents a rest int tempo = 300; Int serbyte; void playtone(int tone, int duration) { for (long i = 0; i < duration * 1000L; i += tone * 2) { digitalwrite(speakerpin, HIGH); delaymicroseconds(tone); digitalwrite(speakerpin, LOW); delaymicroseconds(tone); void playnote(char note, int duration) { static char names[] = { 'c', 'd', 'e', 'f', 'g', 'a', 'b', 'C' ; static int tones[] = { 1915, 1700, 1519, 1432, 1275, 1136, 1014, 956 ; 8 // play the tone corresponding to the note name for (int i = 0; i < 8; i++) { if (names[i] == note) { playtone(tones[i], duration); break;

9 멜로디출력실험 (5) 아두이노프로그램 멜로디출력 void setup() { Serial.begin(115200); pinmode(speakerpin, OUTPUT); for (int i = 0; i < length; i++) { playnote(notes[i], tempo); void loop() { while (Serial.available()) { serbyte = Serial.read(); playnote(serbyte, tempo); Serial.print(serByte); 9

10 멜로디출력실험 (6) 실험결과 소리크기조정 소리크기줄이기 10

11 멜로디출력실험 (7) 실험개요 저장되어있는멜로디를 Piezzo buzzer 를이용하여출력한다. 11

12 멜로디출력실험 (8) 아두이노프로그램 저장멜로디출력 int ledpin = 13; int speakerout = 7; byte names[] = {'c', 'd', 'e', 'f', 'g', 'a', 'b', 'C'; int tones[] = {1915, 1700, 1519, 1432, 1275, 1136, 1014, 956; byte melody[] = "2d2a1f2c2d2a2d2c2f2d2a2c2d2a1f2c2d2a2a2g2p8p8p8p"; // count length: // int count = 0; int count2 = 0; int count3 = 0; int MAX_COUNT = 24; int statepin = LOW; void setup() { pinmode(ledpin, OUTPUT); 12 void loop() { analogwrite(speakerout, 0); for (count = 0; count < MAX_COUNT; count++) { statepin =!statepin; digitalwrite(ledpin, statepin);

13 멜로디출력실험 (9) 아두이노프로그램 저장멜로디출력 for (count3 = 0; count3 <= (melody[count*2] - 48) * 30; count3++) { for (count2=0;count2<8;count2++) { if (names[count2] == melody[count*2 + 1]) { analogwrite(speakerout,500); delaymicroseconds(tones[count2]); analogwrite(speakerout, 0); delaymicroseconds(tones[count2]); if (melody[count*2 + 1] == 'p') { // make a pause of a certain size analogwrite(speakerout, 0); delaymicroseconds(500); 13

14 Arduino Tone Library (1) Arduino Tone Library Arduino core에서 tone 출력기능지원 tone(pin, frequency, duration) notone(pin) 임의의 pin으로지정된주파수의 square-wave pulse (50% duty cycle) 를생성 펄스생성시간은지정가능 출력pin에는 piezo buzzer 또는다른스피커를연결하면소리가생성 RTTTL (RingTone Text Transfer Language) 플레이가능 14

15 Arduino Tone Library (2) Tone 함수를이용한멜로디출력 (1) 회로구성 15

16 Arduino Tone Library (3) Tone 함수를이용한멜로디출력 (2) 아두이노프로그램 /* Melody : Plays a melody circuit: 8-ohm speaker on digital pin 8 */ #include "pitches.h" // notes in the melody: int melody[] = { NOTE_C4, NOTE_G3,NOTE_G3, NOTE_A3, NOTE_G3,0, NOTE_B3, NOTE_C4; // note durations: 4 = quarter note, 8 = eighth note, etc.: int notedurations[] = { 4, 8, 8, 4,4,4,4,4 ; void setup() { // iterate over the notes of the melody: for (int thisnote = 0; thisnote < 8; thisnote++) { 16 // to calculate the note duration, take one second divided by the note type. // e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc. int noteduration = 1000/noteDurations[thisNote]; tone(8, melody[thisnote],noteduration);

17 Arduino Tone Library (4) Tone 함수를이용한멜로디출력 (3) 아두이노프로그램 // to distinguish the notes, set a minimum time between them. // the note's duration + 30% seems to work well: int pausebetweennotes = noteduration * 1.30; delay(pausebetweennotes); // stop the tone playing: notone(8); void loop() { // no need to repeat the melody. 17

18 Arduino Tone Library (5) 센서입력에의한톤출력 (1) 회로구성 18

19 Arduino Tone Library (6) 센서입력에의한톤출력 (2) 아두이노프로그램 void setup() { // nothing to do here void loop() { // get a sensor reading: int sensorreading = analogread(a0); // map the results from the sensor reading's range // to the desired pitch range: float frequency = map(sensorreading, 200, 900, 100, 1000); // change the pitch, play for 10 ms: tone(8, frequency, 10); 19

20 Arduino Tone Library (7) RTTTL Player (1) RTTTL(RingTone Text Transfer Language) RTTTL Player 회로구성 회로구성은앞실험과동일 20

21 Arduino Tone Library (8) RTTTL Player (2) 아두이노프로그램 21 /************************************************* * pitch.h : Public Constants *************************************************/ #define NOTE_B0 31 #define NOTE_C1 33 #define NOTE_CS1 35 #define NOTE_D1 37 #define NOTE_DS1 39 #define NOTE_E1 41 #define NOTE_F1 44 #define NOTE_FS1 46 #define NOTE_G1 49 #define NOTE_GS1 52 #define NOTE_A1 55 #define NOTE_AS1 58 #define NOTE_B1 62 #define NOTE_C2 65 : : :

22 Arduino Tone Library (9) RTTTL Player (3) 아두이노프로그램 #include "pitches.h #define OCTAVE_OFFSET 0 int notes[] = { 0, NOTE_C4, NOTE_CS4, NOTE_D4, NOTE_DS4, NOTE_E4, NOTE_F4, NOTE_FS4, NOTE_G4, NOTE_GS4, NOTE_A4, NOTE_AS4, NOTE_B4, NOTE_C5, NOTE_CS5, NOTE_D5, NOTE_DS5, NOTE_E5, NOTE_F5, NOTE_FS5, NOTE_G5, NOTE_GS5, NOTE_A5, NOTE_AS5, NOTE_B5, NOTE_C6, NOTE_CS6, NOTE_D6, NOTE_DS6, NOTE_E6, NOTE_F6, NOTE_FS6, NOTE_G6, NOTE_GS6, NOTE_A6, NOTE_AS6, NOTE_B6, NOTE_C7, NOTE_CS7, NOTE_D7, NOTE_DS7, NOTE_E7, NOTE_F7, NOTE_FS7, NOTE_G7, NOTE_GS7, NOTE_A7, NOTE_AS7, NOTE_B7 ; 22 //char *song = "The Simpsons:d=4,o=5,b=160:c.6,e6,f#6,8a6,g.6,e6,c6,8a,8f#,8f#,8f#,2g,8p,8p,8f#,8f#,8f#,8g,a#.,8c6,8c6,8c6,c6"; //char *song = "Indiana:d=4,o=5,b=250:e,8p,8f,8g,8p,1c6,8p.,d,8p,8e,1f,p.,g,8p,8a,8b,8p,1f6,p,a,8p,8b,2c6,2d6,2e6,e,8p,8f,8g,8p,1c6,p,d6,8p,8e6,1f.6,g,8p,8g,e.6,8p,d6, 8p,8g,e.6,8p,d6,8p,8g,f.6,8p,e6,8p,8d6,2c6"; //char *song = "TakeOnMe:d=4,o=4,b=160:8f#5,8f#5,8f#5,8d5,8p,8b,8p,8e5,8p,8e5,8p,8e5,8g#5,8g#5,8a5,8b5,8a5,8a5,8a5,8e5,8p,8d5,8p,8f#5,8p,8f#5,8p,8f#5,8e5, 8e5,8f#5,8e5,8f#5,8f#5,8f#5,8d5,8p,8b,8p,8e5,8p,8e5,8p,8e5,8g#5,8g#5,8a5,8b5,8a5,8a5,8a5,8e5,8p,8d5,8p,8f#5,8p,8f#5,8p,8f#5,8e5,8e5"; //char *song = "Entertainer:d=4,o=5,b=140:8d,8d#,8e,c6,8e,c6,8e,2c.6,8c6,8d6,8d#6,8e6,8c6,8d6,e6,8b,d6,2c6,p,8d,8d#,8e,c6,8e,c6,8e,2c.6,8p,8a,8g,8f#,8a,8c6,e6,8 d6,8c6,8a,2d6"; //char *song = "Muppets:d=4,o=5,b=250:c6,c6,a,b,8a,b,g,p,c6,c6,a,8b,8a,8p,g.,p,e,e,g,f,8e,f,8c6,8c,8d,e,8e,8e,8p,8e,g,2p,c6,c6,a,b,8a,b,g,p,c6,c6,a,8b,a,g.,p,e,e,g,f,8e,f,8c 6,8c,8d,e,8e,d,8d,c ;

23 Arduino Tone Library (10) RTTTL Player (4) 아두이노프로그램 23 char *song = "Xfiles:d=4,o=5,b=125:e,b,a,b,d6,2b.,1p,e,b,a,b,e6,2b.,1p,g6,f#6,e6,d6,e6,2b.,1p,g6,f#6,e6,d6,f#6,2b.,1p,e,b,a,b,d6,2b.,1p,e,b,a,b,e6,2b.,1p,e6,2b."; //char *song = "Looney:d=4,o=5,b=140:32p,c6,8f6,8e6,8d6,8c6,a.,8c6,8f6,8e6,8d6,8d#6,e.6,8e6,8e6,8c6,8d6,8c6,8e6,8c6,8d6,8a,8c6,8g,8a#,8a,8f"; //char *song = "20thCenFox:d=16,o=5,b=140:b,8p,b,b,2b,p,c6,32p,b,32p,c6,32p,b,32p,c6,32p,b,8p,b,b,b,32p,b,32p,b,32p,b,32p,b,32p,b,32p,b,32p,g#,32p,a,32p,b,8p,b, b,2b,4p,8e,8g#,8b,1c#6,8f#,8a,8c#6,1e6,8a,8c#6,8e6,1e6,8b,8g#,8a,2b"; //char *song = "Bond:d=4,o=5,b=80:32p,16c#6,32d#6,32d#6,16d#6,8d#6,16c#6,16c#6,16c#6,16c#6,32e6,32e6,16e6,8e6,16d#6,16d#6,16d#6,16c#6,32d#6,32d#6,16d#6,8d#6,16c#6,16c#6,16c#6,16c#6,32e6,32e6,16e6,8e6,16d#6,16d6,16c#6,16c#7,c.7,16g#6,16f#6,g#.6"; //char *song = "MASH:d=8,o=5,b=140:4a,4g,f#,g,p,f#,p,g,p,f#,p,2e.,p,f#,e,4f#,e,f#,p,e,p,4d.,p,f#,4e,d,e,p,d,p,e,p,d,p,2c#.,p,d,c#,4d,c#,d,p,e,p,4f#,p,a,p,4b,a,b,p,a,p,b,p,2 a.,4p,a,b,a,4b,a,b,p,2a.,a,4f#,a,b,p,d6,p,4e.6,d6,b,p,a,p,2b"; //char *song = "StarWars:d=4,o=5,b=45:32p,32f#,32f#,32f#,8b.,8f#.6,32e6,32d#6,32c#6,8b.6,16f#.6,32e6,32d#6,32c#6,8b.6,16f#.6,32e6,32d#6,32e6,8c#.6,32f#,32 f#,32f#,8b.,8f#.6,32e6,32d#6,32c#6,8b.6,16f#.6,32e6,32d#6,32c#6,8b.6,16f#.6,32e6,32d#6,32e6,8c#6"; //char *song = "GoodBad:d=4,o=5,b=56:32p,32a#,32d#6,32a#,32d#6,8a#.,16f#.,16g#.,d#,32a#,32d#6,32a#,32d#6,8a#.,16f#.,16g#.,c#6,32a#,32d#6,32a#,32d#6,8a #.,16f#.,32f.,32d#.,c#,32a#,32d#6,32a#,32d#6,8a#.,16g#.,d#"; //char *song = "TopGun:d=4,o=4,b=31:32p,16c#,16g#,16g#,32f#,32f,32f#,32f,16d#,16d#,32c#,32d#,16f,32d#,32f,16f#,32f,32c#,16f,d#,16c#,16g#,16g#,32f#,32f,32f #,32f,16d#,16d#,32c#,32d#,16f,32d#,32f,16f#,32f,32c#,g#"; //char *song = "A-Team:d=8,o=5,b=125:4d#6,a#,2d#6,16p,g#,4a#,4d#.,p,16g,16a#,d#6,a#,f6,2d#6,16p,c#.6,16c6,16a#,g#.,2a#"; //char *song = "Flinstones:d=4,o=5,b=40:32p,16f6,16a#,16a#6,32g6,16f6,16a#.,16f6,32d#6,32d6,32d6,32d#6,32f6,16a#,16c6,d6,16f6,16a#.,16a#6,32g6,16f6,16a#.,3 2f6,32f6,32d#6,32d6,32d6,32d#6,32f6,16a#,16c6,a#,16a6,16d.6,16a#6,32a6,32a6,32g6,32f#6,32a6,8g6,16g6,16c.6,32a6,32a6,32g6,32g6,32f6,32e6,32g 6,8f6,16f6,16a#.,16a#6,32g6,16f6,16a#.,16f6,32d#6,32d6,32d6,32d#6,32f6,16a#,16c.6,32d6,32d#6,32f6,16a#,16c.6,32d6,32d#6,32f6,16a#6,16c7,8a#. 6"; //char *song = "Jeopardy:d=4,o=6,b=125:c,f,c,f5,c,f,2c,c,f,c,f,a.,8g,8f,8e,8d,8c#,c,f,c,f5,c,f,2c,f.,8d,c,a#5,a5,g5,f5,p,d#,g#,d#,g#5,d#,g#,2d#,d#,g#,d#,g#,c.7,8a#,8g#,8g, 8f,8e,d#,g#,d#,g#5,d#,g#,2d#,g#.,8f,d#,c#,c,p,a#5,p,g#.5,d#,g# ;

24 Arduino Tone Library (11) RTTTL Player (5) 아두이노프로그램 //char *song = "Gadget:d=16,o=5,b=50:32d#,32f,32f#,32g#,a#,f#,a,f,g#,f#,32d#,32f,32f#,32g#,a#,d#6,4d6,32d#,32f,32f#,32g#,a#,f#,a,f,g#,f#,8d#"; //char *song = "Smurfs:d=32,o=5,b=200:4c#6,16p,4f#6,p,16c#6,p,8d#6,p,8b,p,4g#,16p,4c#6,p,16a#,p,8f#,p,8a#,p,4g#,4p,g#,p,a#,p,b,p,c6,p,4c#6,16p,4f#6,p,16c#6,p,8d#6,p,8b,p,4g#,16p,4c#6,p,16a#,p,8b,p,8f,p,4f#"; //char *song = "MahnaMahna:d=16,o=6,b=125:c#,c.,b5,8a#.5,8f.,4g#,a#,g.,4d#,8p,c#,c.,b5,8a#.5,8f.,g#.,8a#.,4g,8p,c#,c.,b5,8a#.5,8f.,4g#,f,g.,8d#.,f,g.,8d#.,f,8g,8d#.,f,8 g,d#,8c,a#5,8d#.,8d#.,4d#,8d#."; //char *song = "LeisureSuit:d=16,o=6,b=56:f.5,f#.5,g.5,g#5,32a#5,f5,g#.5,a#.5,32f5,g#5,32a#5,g#5,8c#.,a#5,32c#,a5,a#.5,c#.,32a5,a#5,32c#,d#,8e,c#.,f.,f.,f.,f.,f,32e,d #,8d,a#.5,e,32f,e,32f,c#,d#.,c#"; //char *song = "MissionImp:d=16,o=6,b=95:32d,32d#,32d,32d#,32d,32d#,32d,32d#,32d,32d,32d#,32e,32f,32f#,32g,g,8p,g,8p,a#,p,c7,p,g,8p,g,8p,f,p,f#,p,g,8p,g,8p,a#, p,c7,p,g,8p,g,8p,f,p,f#,p,a#,g,2d,32p,a#,g,2c#,32p,a#,g,2c,a#5,8c,2p,32p,a#5,g5,2f#,32p,a#5,g5,2f,32p,a#5,g5,2e,d#,8d"; void setup(void) { Serial.begin(9600); // tone1.begin(13); #define isdigit(n) (n >= '0' && n <= '9') void play_rtttl(char *p) { // Absolutely no error checking in here 24 byte default_dur = 4; byte default_oct = 6; int bpm = 63;

25 Arduino Tone Library (12) RTTTL Player (6) 아두이노프로그램 int num; long wholenote; long duration; byte note; byte scale; // format: d=n,o=n,b=nnn: // find the start (skip name, etc) while(*p!= ':') p++; // ignore name p++; // skip ':' // get default duration if(*p == 'd') { p++; p++; // skip "d=" num = 0; while(isdigit(*p)) { num = (num * 10) + (*p++ - '0'); if(num > 0) default_dur = num; p++; // skip comma Serial.print("ddur: "); Serial.println(default_dur, 10); 25

26 Arduino Tone Library (13) RTTTL Player (7) 아두이노프로그램 // get default octave if(*p == 'o') { p++; p++; // skip "o=" num = *p++ - '0'; if(num >= 3 && num <=7) default_oct = num; p++; // skip comma Serial.print("doct: "); Serial.println(default_oct, 10); // get BPM if(*p == 'b') { p++; p++; // skip "b=" num = 0; while(isdigit(*p)) { num = (num * 10) + (*p++ - '0'); bpm = num; p++; // skip colon Serial.print("bpm: "); Serial.println(bpm, 10); 26 // BPM usually expresses the number of quarter notes per minute wholenote = (60 * 1000L / bpm) * 4; // this is the time for whole note (in milliseconds) Serial.print("wn: "); Serial.println(wholenote, 10);

27 Arduino Tone Library (14) RTTTL Player (8) 아두이노프로그램 // now begin note loop while(*p) { // first, get note duration, if available num = 0; while(isdigit(*p)) { num = (num * 10) + (*p++ - '0'); if(num) duration = wholenote / num; else duration = wholenote / default_dur; // we will need to check if we are a dotted note after // now get the note note = 0; 27 switch(*p) { case 'c': note = 1; break; case 'd': note = 3; break; case 'e': note = 5; break; case 'f': note = 6; break; case 'g': note = 8; break; case 'a': note = 10; break;

28 Arduino Tone Library (15) RTTTL Player (9) 아두이노프로그램 case 'b': note = 12; break; case 'p': default: note = 0; p++; // now, get optional '#' sharp if(*p == '#') { note++; p++; // now, get optional '.' dotted note if(*p == '.') { duration += duration/2; p++; 28 // now, get scale if(isdigit(*p)) { scale = *p - '0'; p++;

29 Arduino Tone Library (16) RTTTL Player (10) 아두이노프로그램 else { scale = default_oct; scale += OCTAVE_OFFSET; if(*p == ',') p++; // skip comma for next note (or we may be at the end) 29 // now play the note if(note) { Serial.print("Playing: "); Serial.print(scale, 10); Serial.print(' '); Serial.print(note, 10); Serial.print(" ("); Serial.print(notes[(scale - 4) * 12 + note], 10); Serial.print(") "); Serial.println(duration, 10); tone(8, notes[(scale - 4) * 12 + note], duration); delay(duration); notone(8); else { Serial.print("Pausing: "); Serial.println(duration, 10); delay(duration);

30 Arduino Tone Library (17) RTTTL Player (11) 아두이노프로그램 void loop(void) { play_rtttl(song); Serial.println("Done."); while(1); 30

31 Piezzo Sensor (1) Piezzo Buzzer as Sensor Piezzo Buzzer 는 reverse-pizeoelectric 효과를보임 Piezo element 를움직임 (squeeze) 으로써전기를생성함. Piezzo Knock Sensor Piezzo element 에서생성된전기에의한전압을읽어 event 가발생하였음을검출할수있음 생성된전압을낮추기위해저항을연결할필요가있음 31

32 Piezzo Sensor (2) Piezzo Knock Sensor 회로구성 32

33 Piezzo Sensor (3) 아두이노프로그램 /* Knock Sensor This sketch reads a piezo element to detect a knocking sound. It reads an analog pin and compares the result to a set threshold. If the result is greater than the threshold, it writes "knock" to the serial port, and toggles the LED on pin 13. The circuit: * + connection of the piezo attached to analog in 0 * - connection of the piezo attached to ground * 1-megohm resistor attached from analog in 0 to ground */ // these constants won't change: const int ledpin = 13; // led connected to digital pin 13 const int knocksensor = A0; // the piezo is connected to analog pin 0 const int threshold = 100; // threshold value to decide when the detected sound is a knock or not // these variables will change: int sensorreading = 0; // variable to store the value read from the sensor pin int ledstate = LOW; // variable used to store the last LED status, to toggle the light 33 void setup() { pinmode(ledpin, OUTPUT); // declare the ledpin as as OUTPUT Serial.begin(9600); // use the serial port

34 Piezzo Sensor (4) 아두이노프로그램 void loop() { // read the sensor and store it in the variable sensorreading: sensorreading = analogread(knocksensor); // if the sensor reading is greater than the threshold: if (sensorreading >= threshold) { // toggle the status of the ledpin: ledstate =!ledstate; // update the LED pin itself: digitalwrite(ledpin, ledstate); // send the string "Knock!" back to the computer, followed by newline Serial.println("Knock!"); delay(100); // delay to avoid overloading the serial port buffer 34

35 Piezzo Sensor (5) 실험검토 Piezzo buzzer를두드리면벨처럼울리면서전압을출력일정한전압이상의시간을측정 이벤트발생여부확인다양한형태의센서제작가능 35

Gaming (Virtual Motion), Medical Devices, Computer

36 Flex Sensor (1) 개요 Angle Displacement Measurement Bends and Flexes physically with motion device Possible Uses Robotics, Gaming (Virtual Motion), Medical Devices, Computer Peripherals, Musical Instruments, Physical Therapy Simple Construction 36

37 Flex Sensor (2) 개요 동작방식 Electrical Characteristics Size: approx 0.28" wide and 1"/3"/5" long Resistance Range:1.5-40K ohms depending on sensor. Flexpoint claims a resistance range. Lifetime: Greater than 1 million life cycles Temperature Range: -35 to +80 deg. Celcius Hysteresis: 7% Voltage: 5 to 12 V 37

38 Flex Sensor (3) 개요 동작방식 38

39 Flex Sensor 출력 (1) 실험개요 Flex sensor 값을읽어모니터에출력한다. 회로구성 39

40 Flex Sensor 출력 (2) 아두이노프로그램 // Flex sensor test program // HARDWARE: // Make the following connections between the Arduino and the flex sensor // Note that the flex sensor pins are interchangeable // Sensor pin - +5V // Sensor pin - Analog In 0, with 10K resistor to GND // INSTRUCTIONS: // Upload this sketch to your Arduino, then activate the Serial Monitor void setup() { // initialize serial communications Serial.begin(115200); void loop() { int sensor, degrees; // read the voltage from the voltage divider (sensor plus resistor) sensor = analogread(0); 40

41 Flex Sensor 출력 (3) 아두이노프로그램 // convert the voltage reading to inches // the first two numbers are the sensor values for straight (768) and bent (853) // the second two numbers are the degree readings we'll map that to (0 to 90 degrees) degrees = map(sensor, 768, 853, 0, 90); // note that the above numbers are ideal, your sensor's values will vary // to improve the accuracy, run the program, note your sensor's analog values // when it's straight and bent, and insert those values into the above function. // print out the result Serial.print("analog input: "); Serial.print(sensor,DEC); Serial.print(" degrees: "); Serial.println(degrees,DEC); // pause before taking the next reading delay(100); 41

42 과제물 #3 과제내용 1. Flex Sensor 입력을받아굽어진정도에따라 8 개의 LED 를비례하여출력하는출력하는프로그램을작성하여라. 2. 학기말과제와다음사항을제출하여라 A. 구현설계도 B. 부품목록및견적서 제출물 회로도, 프로그램소스, 실행예 ( 사진 ) 제출일 차주수업시간 42

Microsoft PowerPoint - es-arduino-lecture-03

Microsoft PowerPoint - es-arduino-lecture-03 임베디드시스템개론 : Arduino 활용 Lecture #3: Button Input & FND Control 2012. 3. 25 by 김영주 강의목차 디지털입력 Button switch 입력 Button Debounce 7-Segment FND : 직접제어 7-Segment FND : IC 제어 2 디지털입력 : Switch 입력 (1) 실습목표 아두이노디지털입력처리실습