ONIX-MHS-E5010X_eng_081029

Transcription

1 Looks Good Easy Smart

2 Website: English

3 Dear Customers Thanks for purchasing Coway humidifier. To use and maintain your product correctly, read and retain this manual carefully for future reference. Refer to this manual if any function of your product does not operate normally or if a problem occurs while using your product. Woongjin Cuchen is not liable for any damage caused by not following the instructions in this manual. Greetings / Precaution Precaution Important safety instructions 02 Features 07 How to use Parts descriptions Display LED / Control Panel Direction for use Control panel instruction Maintenance Troubleshooting Troubleshooting guide Appliance specifications 22 23

4 Precaution Important safety instructions Instructions to protect owner s safety and prevent property damage. Please read and save all instructions before use. Danger Danger Death or critical damage is possible if the instructions are not followed. Warning For the Power This appliance is only for 120 V~. Danger of electric shock or fire. Do not touch power cord with wet hands. Danger of electric shock or fire. Remove foreign materials from the power cord. Danger of failure,fire or electric shock. Considerable injury or property damage is possible if the instructions are not followed. Caution Minor injury or property damage is possible if the instructions are not followed. Do not use a damaged power cord or loose outlet. Danger of electric shock or fire. Do not move your appliance by pulling the power line. Danger of electric shock or fire. Do not connect or alter the power cord on your own authority. Danger of electric shock. Precaution How to use Troubleshooting

5 Precaution Instructions to protect owner s safety and prevent property damage. Please read and save all instructions before use. For the Power Precaution Danger Do not plug and unplug the power cord continuously. Danger of electric shock or fire. Do not bend the power cord by force or allow it to be crushed or damaged by heavy objects. Danger of electric shock or fire. If the power cord is damaged, have it replaced or repaired by its manufacturer, dealer or a qualified technician (service staff). Danger of electric shock or fire. If water enters the power part, unplug the power cord and dry it completely before use. Danger of electric shock or fire. Unplug the power cord by pulling the cord. If you unplug it by pulling the power cord,part of the core line may be disconnected and consequently heat or fire may be generated. Make sure that the power cord is unplugged when repairing, checking or cleaning the appliance replacing a part. Danger of electric shock. Do not plug several electric appliances in one outlet simultaneously. Use a dedicated outlet. Danger of heating, ignition, electric shock or fire.

6 Warning Caution For installation Keep the appliance out of reach of children. Failure to do so may cause fire, electric shock or burning. Avoid direct sunlight and avoid installing the appliance near thermal appliances or putting candles or cigarettes on the appliance. Doing so may cause fire. Do not use a damaged water tank. Doing so may cause fire, electric shock or leakage. Do not install the appliance in a humid, dusty or wet place. Doing so may cause electric shock or fire. Do not use the appliance on glass. If the glass surface gets wet with water the appliance will slide on the glass and may be damaged or you may get burned. Do not install on a slope and do not knock or bang the appliance. Doing so may cause bodily injury, property damage or leakage. Avoid humidifier's mist from directly contacting furniture, TV, gas range, etc. According to water quality white powder may accumulate on surrounding furniture or TV due to calcium or magnesium dissolved in the water and the flame of the gas range may be affected. Avoid your legs, hands or other objects from tripping on the power cord and the appliance from falling. Doing so may cause bodily injury, property damage and leakage. Do not install the appliance close to a wall. Keep a clear distance of 3.9 (10 cm) from a wall and 39.4 (100 cm) from the top. Do not install the appliance on a home appliance such as a TV. The home appliance may be damaged by the mist. Precaution How to use Troubleshooting

7 Precaution Instructions to protect owner s safety and prevent property damage. Please read and save all instructions before use. In use Precaution Danger Do not put pins, needles or foreign objects into the mist outlet of the humidifier and the seam of the appliance. Doing so may cause bodily injury by electronic shock or abnormal operation. Supply clean water with normal temperature (between and 9535)) to the water tank. Failure to do so may cause damage of the appliance or nebulizer. Do not disassemble the mist outlet, while operating and especially, prevent children from touching it with their hands or faces. Doing so may cause injuries or burns. Do not block the mist outlet with a towel or hand while operating the appliance. Doing so may cause appliance failure, fire, burn orleakage. Do not scratch the nebulizer surface with fingers or a sharp implement. Doing so may cause appliance malfunction. Do not disassemble the tank or transport the appliance while operating. Doing so may cause appliance malfunction, electric shock, leakage, fire or burn. Do not apply strong impact while transporting the water tank for top-up or cleaning. Doing so may cause leakage or appliance damage by the impact and dropping the tank may cause injury on the instep of a foot or other body part.

8 Danger Warning Caution Do not intentionally press the load with a chopstick or other tools. The spray may become weak or stop due to the increased water level in the reservoir and water leakage may cause appliance failure or fire. Do not directly inhale the humidity. Doing so may damage your health. When draining for appliance cleaning, incline the appliance in the drain direction to avoid the water from being entered the vent.wait until the water gets cold before draining. Failure to do so may cause electric shock or appliance damage. Do not disassemble, repair or tamper with the appliance arbitrarily. Doing so may cause electric shock, fire or appliance damage. If the product is not to be used for a long time, remove the water in the reservoir or water tank thoroughly before storing. The remaining water may cause nebulizer damage, malfunction or pollution. Do not open and close the water tank lid repeatedly. The spray may become weak or stop due to the increased water level in the reservoir and water leakage may cause appliance failure or fire. Do not leave volatile materials (insecticide, gasoline, thinner, benzene, etc.) on top of or near the appliance. Doing so may cause deterioration, discoloration and fire. Do not use organic solvents such as spray-type insecticide, gasoline, thinner and benzene to clean the appliance. The use of organic solvents may cause deterioration, discoloration or bodily injury. Do not allow a child to use the appliance by itself. Keep the appliance out of the reach of children. Doing so may cause electric shock, burn or bodily injury. Precaution How to use Troubleshooting

9 PROGR Precaution Precaution Features Top Water Pouring Structure By considering the top water pouring structure, water tank is not dispatched from the main body and the water is topped up through the upper water filter of the water tank for user convenience. Iodine Filter Using ion exchange resin removes hardness materials such as calcium and magnesium from water and using iodinated resin improves antibacterial activity. Air-Cleaning Filter The filter sucks the exterior air of the purifier and purifies it into clean air. Top Water Pouring Structure Top Water Pouring Structure Sterilized Humidification Function Selecting sterilized humidification maintains the water temperature in the heater at over 75 to prevent propagation of psychrophilic bacteria for sanitary humidification. Nano-Silver Antibacterial Tray for Cleaning STERILIZE STERILIZE The Nano-silver antibacterial tray inhibits the propagation of bacteria in water and can be dispatched from the main body to allow easy and convenient cleaning. PRO 2-Way Mist Outlet With 2-way mist outlet, bidirectional spray is available and minute water particles are sprayed to prevent the area near the humidifier from becoming wet. Silicon Nebulizer Cap STERILIZE A silicon nebulizer cap is applied to the fitted to the nebulizer to prevent foreign materials from being generated.

10 CURRENT PROGRAM HOUR SLEEP CHILD HEALTH STERILIZE WATER DESIRED CONT. TIMER Ez Water Tank Cap A consumer can open/close the water tank cap using minimal force. Empty Indicator Function If the water in the water tank is low, the water empty indicator on the display window is turned on along with no-water melody. 4-Step Spray Adjustment Function According to the consumers needs, the spray amount can be adjusted from Weak to Middle to Strong to Turbo. Humidity Adjustment Desired humidity is maintained. Child Care Mode Humidity suitable for a baby is maintained. This mode is released when selecting Humid Adjustment or Spray Adjustment. Healthy Mode Optimal humidity is maintained to protect skin and avoid cold. This mode is released when selecting Humid Adjustment or Spray Adjustment. Artificial Intelligence Function and Sleep Function Selecting the Artificial Intelligence button adjusts the indoor humidity with Mycom and selecting the Sleep mode changes to a low noise status to make a comfortable sleep environment. Humidification Time Reservation Function Consumers can set the time for humidification. When the set time passes, humidification will stop. CHILD PROGRAM CURRENT DESIRED WATER 4-Step CURRENT DESIRED CONT. TIMER HOUR HEALTH CONT. TIMER HOUR SLEEP Precaution How to use Troubleshooting

11 Parts descriptions Parts Description / Display LED / Control Panel Water tank lid Completely lock the Water tank lid while operating the appliance. Spray guiding pipe This is the passage for water particles. Water tank After filling water in the water tank, firmly lock the Ez water tank cap to prevent leakage of the water. Ez water tank cap Main body Air-cleaning filter Air flowing into the appliance is purified through this filter. Load Do not push the load intentionally. Water level sensor If the water in the water tank is low, this appliance will detect it by itself and stop the water spray. Control panel Refer to control panel instruction (see Page10) 2-way mist outlet Fine spray nozzle This allows fine water particles to be passed and large water particles to be removed. Cleaning brush This is used to clean the nebulizer surface. Vent Wind comes in and out. Ensure that water does not enter the vent while cleaning the appliance. Nebulizer This makes water mist. Bidirectional spray is available while fine mist sprayed. Iodine filter Ion exchange resin and iodine resin purify the water. Change this filter every three months. Nano-silver antibacterial tray for cleaning Clean this after dispatching from the main body. Power cord

12 Display LED / Control Panel Sleep mode AI mode Spray amount Health Mode Sterilized humidification This displays sterilized humidification. Empty indicator When water is low, this is turned on along with melody. CURRENT Current humidity This displays the current humidity around the product. Desired humidity This displays the desired humidity. PROGRAM DESIRED CONT. TIMER HOUR SLEEP CHILD HEALTH STERILIZE WATER Reserved time This displays the reserved time. Child care mode Power button This turns the power on/off. Customization button This selects Program Sleep Child Health Manual. Sterilized humidification button This selects sterilized humidification. Spray adjustment button This selects Weak, Middle, Strong, and Turbo. Humidity adjustment button This selects the desired humidity. Time setting button This sets the time of product operation. Continue This indicates the product is continuously operating. Reserve This indicates the operation time is set. If the Program, Sleep, Cilde care, and Health modes are all turned off, the current mode will be manual mode. Precaution How to use Troubleshooting

13 Direction for use Direction for use Fill with water before plugging the power cord. (No water may cause nebulizer malfunction.) Coins, nails and screws in the reservoir result in the malfunction of the nebulizer part. Please check before starting. In addition, disconnect the water tank, drain the water in the reservoir thoroughly and check if the air-cleaning filter is mounted on the bottom of the appliance. After initially filling with the water, the humidification starts after approx. 20seconds~4minutes. Wash the water tank before initial use to spray more comfortable mist. Filling the water tank through the top water pouring. Turn the water tank lid anti-clockwise to `OPENto dispatch it from the main body. Fill the water by using containers such as kettles. Use clean tap water. Do not use coldwater under 42.8 (6or warm water over Doing so may cause nebulizer malfunction. The use of undergrounse poor water spray or appliance failure. Fill water to more than half the water tank but less than the MAXlevel. If water is lower than half the water tank, humidification may be delayed. If water is supplied up to themaxlevel, the water will overflow. Do not splash water around the water tank while supplying water. After topping up the water, dry the water tank with a clean cloth.

14 Insert the water tank lid while aligning the upper protrusion withopenand turn the cap clockwise until the protrusion reaches CLOSEto close it. Introduction Cautions for top water pouring If this appliance is used without the water tank lid, spray may not work because water is not supplied. If there is no water tank lid, the humidification does not start after approx. 10~20 minutes. Do not intentionally press the load with a chopstick or other tools. The spray may become weak or stop due to the increase in water level in the reservoir and water leakage may cause appliance failure or fire. Do not open/close the water tank lid more than 6 times consecutively. The spray may become weak or stop due to the increase in water level in the reservoir and water leakage may cause appliance failure or fire. Clean the reservoir and the water tank once every two days. Keep the appliance out of reach of children. Change the water everyday. Precaution How to use Troubleshooting

15 Direction for use Filling the water tank through the lower water inlet Direction for use Remove the 2-way mist outlet and spray nozzle. If the water tank is transported with the 2-way mist outlet detached, mist outlet may be damaged. Lift the water tank. Lift the water tank by using the handle on the upper water tank. Do not lift and transport the main body and the water tank together. PROGRAM SLEEP CHILD HEALTH STERILIZE WATER CURRENT DESIRED CONT. TIMER HOUR Turn the Ez water tank cap anti-clockwise to open the cap.

16 Precaution How to use Fill the water in the water tank. Use clean tap water. Do not use cold water under 42.8(6 and warm water above Doing so may cause nebulizer malfunction. The use of underground water or water with a lot of rust or dregs may cause poor water spray or appliance failure. Fill water to more than half the water tank If water is lower than half the water tank, humidification may be delayed. After topping up the water, dry the water tank with a clean cloth. Turn the Ez water tank cap clockwise until the cap is closed thoroughly. Turn the Ez water tank cap until the rattle sound is heard. The sound indicates the cap is closed. Fit the mist outlet in the water tank facing the front of the appliance for spraying. Precaution How to use Troubleshooting

17 Direction for use Direction for use / Control panel instruction Put the water tank on the main body. Check the water tank is properly seated to the main body and wait until the water tank is filled with water. Check the nano-silver antibacterial tray for cleaning is properly seated. If the tray is not attached properly, water will not be supplied to the water tank and humidification will not operate. For the product with iodine filter: Approx. 20 seconds ~ 4 minutes is required to purify the water. Put the power cord in a 120 V~ socket and press the power button. The appliance will start with a bell sound. Default setting is [Manual / Sterilized Humidification / Spray -Turbo / Humidification Time - Co]. After inserting the cord, make the indoor environment comfortable by following the instructions for the use of the operation part. If the appliance is not to be used, unplug the power cord and store the appliance. Introduction The use of the water fully cooled after boiling or tap water stored for a day will provide more comfortable humidity. If the appliance is not to be used for a long time, remove the water in the water tank and the reservoir thoroughly. The humidity has a bad smll: The smell comes from chlorine contained in tap water. Using tap water stored for a day or water fully cooled after boiling will reduce the smell. Weak mist output or no mist output: The appliance may have a weak mist output when cold water is used or water level is high. Operate the appliance in strong mode for 30 seconds and then the appliance will operate normally. No mist output after cleaning: Foreign materials remain on the nebulizer. Wash out the inside of the reservoir and the water tank with clean water and wipe the surface of the nebulizer with a clean brush. In Weak mode, a small amount of invisible water mist is sprayed but the operation is normal. PROGRAM SLEEP CHILD HEALTH STERILIZE

18 Control panel instruction How to Use Spray Adjustment Introduction If the initial indoor humidity is less than 30%, select Turboby pressing the Spray Adjustment button to increase the indoor humidity fast. Turbo is set by default. Adjust the spray amount by pressing the Spray Adjustment button. Pressing this button selects in the order of WeakMiddleStrongTurbo. CURRENT DESIRED CONT. TIMER HOUR HEALTH STERILIZE WATER How to Use 'Customization Press the Customization button. This function allows the appliance to repeat Operate/Stop' humidification to maintain indoor humidity at 55 %. This function allows the appliance to operate at a low noise and low luminance lamp status for sleep. CURRENT PROGRAM DESIRED CONT. TIMER Pressing this button selects in the order of Manual. This function allows the appliance to repeat Operate/Stop' humidification to maintain humidity suitable for a baby(50~60%). HOUR SLEEP CHILD HEALTH STERILIZE WATER This function allows the appliance to repeat Turbo/Strong/Middle/ Weak' humidification to maintain humidity proper for skin and against cold(55~60%). This function allows the appliance to operate according to user requirements. Precaution How to use Troubleshooting

19 Control panel instruction How to Use 'Time Setting Control panel instruction Introduction The gap between the set time and the current time must be within 8 hours. If the water in the water tank is low, the operation will be stopped before the set time. Press the Time Setting button to set the time to operate the appliance. Pressing this button selects in the order of Co(Continue) Co(Continue) When the set time is reached, humidification automatically stops and displayed. CHILD If the water in the HEALTH water tank is low, no-water display STERILIZE will be turned on and humidification will stop. WATER CURRENT DESIRED CONT. TIMER If the humidification HOUR time and desired humidity are set,the humidification will repeat Operate / Stop How to Use 'Sterilized Humidification Whenever the Sterilized Humidification button is pressed, Sterilized Humidificationis turned on/off repeatedly. Sterilized Humidification is set by default. Heating water to a certain temperature takes approx. 30 minutes. PROGRAM SLEEP CHILD HEALTH STERILIZE WATER CURRENT DESIRED CONT. TIMER HOUR

20 How to Use 'Humidity Adjustment Introduction A user can adjust the indoor humidity. Default humidity is Co (Continue). Pressing this button automatically changes to the Manual mode. Press this button to adjust the humidity. Pressing this button selects in the order of Co CURRENT DESIRED CONT. TIMER HOUR CHILD HEALTH STERILIZE WATER Desired humidity selection table according to the indoor humidity If the desired humidity is lower than the current one, spray is not working. Press the Humidity Adjustment button to set the desired humidity to be higher than the current one. If the current humidity is higher than the desired one, the spray will be stopped and the current humidity and the desired one are displayed in turns. For a comfortable indoor environment in the Co (Continue) mode, if the humidity reaches 75 %, the mode will change to the 75% Co Customization mode. (For 3 hours after humidification starts, the mode is not changed to the 75% Co Customization mode.) Desired Indoor Humidity (%) Desired Humidity (%) Over 78% Co (Continue) Precaution How to use Troubleshooting

21 Maintenance Unplug the power cord before cleaning. After using sterilized humidification, the temperature of the water in the reservoir is hot. Thus, after the water gets cold, clean the appliance. Clean the 2-way mist outlet, the reservoir and the water tank once every two days. Cleaning the iodine filter - After disconnecting the filter from the Ez water tank cap, shake it slowly in clean tap water to wash it. The filter must not be disassembled. Doing so may damage the ion exchange resin protection pack and leak the resin. Iodine filter may break with strong impact. The lifetime of the iodine filter is 3 months.if an expired appliance is used, the appliance performance may be degraded.thus, replace the filter. If 3 months have passed, replace the filter and use a new one. While the filter is used, yellow liquid may leak from the ion exchange resinoccasionally. It is not harmful to health. Cleaning the water tank - Put tap water in the water tank, wipe it with a soft cloth and shake the water tank to remove water scale. Do not use general detergent or soapy water. Doing so may cause nebulizer damage or bodily injury as they are sprayed along with water particles. Cleaning the main body Drain the water in reservoir. Drain the water in drain direction. Ensure that water does not enter the vent. After removing Silver Nano Anti-Bacterial Tray for cleaning from the main body, wash it out with clean water and remove water scale with a soft cloth. A small quantity of water may remain in the main body. Remove the remaining moisture with a soft cloth and attach the nano-silver antibacterial tray. Do not disassemble the water level sensor. Doing so may cause appliance failure.

22 Cleaning the spray guiding pipe - Wash out the pipe with clean water and remove water scale with a soft cloth. Cleaning the 2-way mist outlet / fine spray nozzle - Turn the 2-way mist outlet anti-clockwise to disassemble. Wash out the nozzle with clean water and remove water scale with a soft cloth. After cleaning,insert the hook on the bottom of the 2-way mist outlet into the groove on the top of the mist outlet and turn the 2-way mist outlet clockwise to attach it. Cleaning the air-cleaning filter - Pull out the filter cover by pressing it slightly, remove the filter dust with running water and then attach it again after drying thoroughly. Clean the filter weekly to maintain comfortable air. Precaution How to use Troubleshooting

23 Maintenance Maintenance / Troubleshooting guide Cleaning the nebulizer - Wipe the surface of the nebulizer with a soft brush and clean softly and dry the nebulizer with a soft cloth. The water scale(white powder phenomenon) on the nebulizer surface will make the spray weak. Do not wipe the nebulizer with general detergent or soapy water. The spray may become weak or the nebulizer may be damaged. Do not touch the nebulizer surface with fingers or scratch with a sharp implement. The spray may become weak or the appliance may malfunction. Introduction Iodine filter The nebulizer is the consumable part and its lifetime is approx. 5,000 hours in standard operation condition. Long-term storage - Remove the remaining moisture in the water tank, mist outlet and reservoir thoroughly with a soft cloth and then store the product. Nano-silver antibacterial tray for cleaning

24 Troubleshooting guide Before requesting repair service, check the following list. Even if the appliance is not out of order, the humidifier may not operate ormally because you are unfamiliar with the appliance or because of a appliance minor problem. In these cases, the following list will help you fix the problem without the help of Customer Service. If the trouble continues, contact our customer service. Problem White dust is forming on the nebulizer water tank. Air blows but water vapor is not produced. Humidity Level is low. The humidity has a bad smell. Water supply is not consistent. The floor is too wet. Solution Fine materials on the nebulizer space and reservoil are harmless. Use the product after cleaning the nebulizer with clean water. Check if the spray is in weak mode. If underground water has been used, replace it with tap water. Clean the nebulizer and its surrounding area. If the water level in the reservoil is high, drain some water. If underground water has been used, replace it with tap water. Is the water in the appliance hot, cold or frozen? (The use of water below 42.8(6 or above 95(35 may cause nebulizer failure.) If the spray amount gets too small, remove the foreign materials on the nebulizer surface. Is the nebulizer damaged or is the lifetime of the nebulizer expired? (The nebulizer is a consumable part.) The smell comes from chlorine contained in tap water and is harmless. (Use tap water stored for a day or water fully cooled after boiling will reduce the smell.) Clean the inside of the appliance. Put the water tank on the body correctly. Fill with water to more than half the water tank. Reduce the mist amount. Coway Customer Service Center : (213) Precaution How to use Troubleshooting

25 Appliance Specifications Model Number MHS-E5010X Power Supply Power Consumption 140 W (40W for cold humidification) Humidifying Mode Combination (heating type + ultra sonic type) Max. Humidity Amount 150 mgal/hr (400 ml/hr) (based on sterilized humidification) Successive Humidity Hours Approx 12 hours (based on sterilized humidification) Weight 8.15 lbs. (3.7 kg) Water tank capacity Auto Humidity Control Humidification Type Dimensions 120 V~,60 Hz 1.32 gal (5.0 L) Humidity sensor Fine humidification 11.0 (W) X 7.1 (D) X 13.7 (H) 280(W) X 182(D) X 350(H) mm These specifications may be slightly changed for the enhancement of performance.

26 Precaution How to use Troubleshooting

27

28

29

30

31

32

33 PROGR Top Water Pouring Structure Top Water Pouring Structure STERILIZE STERILIZE PRO STERILIZE

34 CURRENT PROGRAM HOUR SLEEP CHILD HEALTH STERILIZE WATER DESIRED CONT. TIMER CHILD PROGRAM CURRENT DESIRED WATER 4-Step CURRENT DESIRED CONT. TIMER HOUR HEALTH CONT. TIMER HOUR SLEEP

35

36 CURRENT PROGRAM DESIRED CONT. TIMER HOUR SLEEP CHILD HEALTH STERILIZE WATER

37

38 Introduction

39

40

41 Introduction PROGRAM SLEEP CHILD HEALTH STERILIZE

42 Introduction CURRENT DESIRED CONT. TIMER HOUR HEALTH STERILIZE WATER CURRENT PROGRAM DESIRED CONT. TIMER HOUR SLEEP CHILD HEALTH STERILIZE WATER

43 Introduction CHILD HEALTH STERILIZE WATER CURRENT DESIRED CONT. TIMER HOUR PROGRAM SLEEP CHILD HEALTH STERILIZE WATER CURRENT DESIRED CONT. TIMER HOUR

44 Introduction CURRENT DESIRED CONT. TIMER HOUR CHILD HEALTH STERILIZE WATER

45

46

47 Introduction

48 Coway Customer Service Center : (213)

49 MHS-E5010X 120 V~,60 Hz 140 W 150 mgal/hr (400 ml/hr) 8.15 lbs. (3.7 kg) 1.32 gal (5.0 L) 11.0 (W) X 7.1 (D) X 13.7 (H) 280(W) X 182(D) X 350(H) mm

50