P/N. 920-011211-01 Edition 1 NOV. 12 EZ-2200/EZ-2300
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. EMS AND EMI COMPLIANCE STATEMENT FOR EUROPEAN USERS This equipment has been tested and passed with the requirements relating to electromagnetic compatibility based on the standards EN50081-1 (EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-6/-8/-11 (IEC Teil 2,3,4). The equipment also tested and passed in accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits. CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the equivalent type recommended by the manufacture. Dispose of used batteries according to the manufacturer s instructions. Specifications are subject to change without notice. 1
CHAPTER 1....3 1-1....3 1-2....3 1-3....3 1-4....4 1-5....5 1-6....7 CHAPTER 2....9 2-1....9 2-2. /...10 2-3....11 2-4. USB...13 2-5. USB...14 2-6. PC...15 CHAPTER 3...16 3-1....16 3-2....16 3-3....18 3-4....18 CHAPTER 4....20 4-1. LCD/LED...20 4-2....20 4-3. -...21 4-4....22 4-5....23 4-6....24 4-7....25 CHAPTER 5....26 5-1....26 5-2....26 5-3....27 5-4....27 5-5....28 2
Chapter 1. 1-1. Godex EZ-2000, /. EZ-2000. : Mm 8 12 ( 203 300 ). LCD ( ).,,, 8, 450M (1 ). 50.. 1-2. EZ-2200 (203 DPI)/EZ-2300 (300 DPI) 1-3.. 1. Barcode printer 2. Power cable (110V or 230V) 3. Parallel cable 4. Serial Cable (optional) 5. USB Cable (Optional) 6. Quick Start Guide 7. Label Roll Sample 8. Ribbon Roll Sample 9. Empty Ribbon Roll 10. CD (includes Software/Manual/Driver/DLL) 3
1-4. EZ-2200 EZ-2300 203 dpi (8 dot/mm) 300 dpi (12 dot/mm) / / CPU 16,, :, : 50.8mm (2 )/sec ~ 152.4mm (6 )/sec 50.8mm (2 ) ~ 101.6mm (4 ) 1270mm (50 ) 558.8mm (22 ) 25mm (1 ) ~ 104 mm (4.09 ) 25mm (1 ) ~ 105 mm (4.13 ) : Max. 203mm (8 ) : 38.1 mm (1.5 )~ 76.2 mm (3 ) : 25.0 mm (1 ) ~ 118.0 mm (4.65 ) : 0.06~0.25mm : (,, ) : / : 450M (1471 ft) : 30mm ~ 110 mm (1.18 to 4.33 ). : 25.4 mm (1 ). : 75 mm (2.95 ). EZPL ( ) : QLabel-III DLL & : Microsoft Windows 95, 98, Me, NT 4.0, 2000 and XP 9 (OCR A & B ), (EZPL 8), 4 (0, 90, 180, 270 ), 6,8,10,12,14,18,24,30.,. 4 (0, 90, 180, 270 ). 8. BMP, PCX; ICO, WMF, JPG, EMF. Code 39, Code 93, Code 128 (subset A,B,C), UCC 128, UPC A / E (add on 2 & 5), I 2 of 5, EAN 8 / 13 (add on 2 & 5), Codabar, Post NET, EAN 128, DUN 14, MaxiCode, PDF417 & Datamatrix Code,, USB, PS2 Baud rate 300 ~ 38400, XON/XOFF, DSR/DTR : 2MB Flash, 2MB DRAM, : 2MB Flash LCD LCD LED : Power, Ready, Error : Feed, Pause, Cancel 100/240VAC, 50/60 Hz, : 40 F to 104 F (5 C to 40 C) : -40 F to 122 F (-20 C to 50 C) : 30-85%, : 10-90% Cert. Approval CE, CUL, FCC Class A : 454.58 mm (17.9 ) : 277.30 mm (10.92 ) : 275.55 mm (10.85 ) : 13 Kg 2MB (KP-180) QR code. 4
1-5. Handshake Interface cable Pin out : DSTB connects to the printer, BUSY connects to the host : Parallel cable compatible to IBM PC : See below PIN NO. FUNCTION TRANSMITTER 1 2-9 10 11 12 13 14-16 17 18 19-30 31 32 33 34-36 Strobe Data 0-7 Acknowledge Busy Paper empty Select N/C Chassis Ground N/C Signal Ground N/C Fault Signal N/C host host printer printer printer printer host printer ground Serial Default Setting : 9600 baud rateno parity8 data bits1 stop bitxon/xoff protocol RTS/CTS DB9 : PIN NO. 1 2 3 4 5 6 7 8 9 FUNCTION +5 V TXD RXD N/C GND N/C CTS RTS N/C PC ( ) PC(DTE) EZ-2000(DCE) --- 1 1 +5V RXD 2 2 TXD TXD 3 3 RXD DTR 4 4 N/C GND 5 5 GND DSR 6 6 N/C RTS 7 7 CTS CTS 8 8 RTS --- 9 9 N/C 5
USB : Type B PIN NO. 1 2 3 4 FUNCTION USBVCC D- D+ GND PS2 PIN NO. 1 2 3 4 5 6 FUNCTION DATA N/C GND VCC CLOCK N/C PS2 PC PC EZ-2000 DATA 1 1 DATA N/C 2 2 N/C GND 3 3 GND VCC 4 4 VCC CLOCK 5 5 CLOCK N/C 6 6 N/C 6
1-6.. 1 Top Cover 11 Label Width Guide 21 Ribbon Feed Rod 2 Indicator Light 12 Ink Position Lever 22 Label Feed Rods 3 LCD Display 13 Print Head Spring Box 23 Label Feed Guide 4 Control Key 14 Stripper Sensor 24 Fan-Fold Label Insert 5 Ribbon Rod 15 Tear Off Bar 25 Power Socket 6 Bottom Front Cover 16 Printer Mechanism 26 Power Switch 7 Print Head Lever 17 Rewinder Option Cover Plate 27 Parallel Port 8 Ribbon Rewind Shaft 18 Rewinder Connector 28 USB Port 9 Ribbon Supply Shaft 19 Cutter Connector 29 Serial Port 10 Label Roll Bar 20 Cable Configuration holes 30 PS2 Port 7
31 Moveable Sensor Lever 32 Sensor Position Mark 33 Moveable Sensor 8
Chapter 2. : (TT) :. (DT) : ;.. 2-1. 1.. 2.. 3.. 4.. 5.. 6.. :. 9
7.. :. 8.. 9.. 2-2. / 1. ( ). 2. ( ). 10
2-3. 1.. 2.. 3... 4.. 5.. 6. ( ). 11
7.,. 8.. 9.. 10.. 12
2-4. USB 1. USB. USB PC PC. 2. Search for al suitable driver for my device [recommended]. Next. 3.. 13
4. USB Next. 5. USB,. 6. \\ USB Ports(COM & LPT). USB COM3. 7. USB, USB (QLabel III Godex ). 2-5. USB USB, open USB Driver Ftdiunin. USB Continue. 14
2-6. PC 1.. 2.,,. 3. PC. 4. PC.. : USB USB. 15
Chapter 3 3-1. 31 Bottom Cover Screw 32 Liner Rewind Shaft 33 U Shape Clip 34 Max. Liner Rewind Sensor 35 Rewinder Cable Connector 36 Screws 3-2. 1.. 2.. 3.. 4.. 16
5.. 6. U,. 7.,. 8. (2-1. 2-3. ). 9. ( 400mm ),. 10., U. :. 11.. 12.. 13.. 14. 110mm.. :. 17
3-3. 37 Cutter Cover 38 Cutter 39 Cutter Cable Connector 40 Screws 3-4. 1.. 2.. 3.. 4.. 5.. 18
6.. 7.. 8.. 9. (2-1, 2-3 ).. :. 19
Chapter 4. 4-1. LCD/LED LCD LED Beep EZ-XXXX Green Green 1 EZ-XXXX: ; Vx.xxx: Vx.xxx Self Test Green Green 3. 21. Now in. 22 Green Green 3 Dump Mode. Auto. 23 Green 3 Sensing mode. EZ-XXXX Green Green. Pause. Pause Print job is Green Green cancelled. Press feed key Feed. to continue print job Green Red PROGRAM Red Green LOADING (Flash). LOADING Green Green 1. COMPLETE Setting Mode Green Green 1. 24. 4-2. Pause Key Pause, Pause, LCD EZ-xxxx Vx.xxx Pause.. ; Pause, Pause. Pause, Pause., 10 2 Pause ; Pause 8. Cancel Key Cancel LCD xxxxxxxx Cancel,.. 10 2 Cancel ; 8. Feed Key Feed, ( ). Feed. ;, (14 ). 20
4-3. - -. - Feed. -. - : 1.. 2. ( ) 3. 1 LCD Self Test.. & EZ2200 : V1.000 Serial port : 96,N,8,1 DRAM Speed, Density, Ref. Point, Print direction,, AD 1 DRAM installed Image buffer size : 1050K 000 FORM(S) IN MEMEMORY 000 GRAPHIC(S) IN MEMORY 000 FONT(S) IN MEMORY 000 ASIAN FONT(S) IN MEMORY 998K BYTES FREE MEMORY ^S6 ^H5 ^R000 ~R200 ^W100 ^Q102,3 Option : ^D0 ^O0 ^AT Gap Sensor AD : 97 142 188 -. 21
4-4., PC. 8,,. : 1.. 2. ( ). 3. LCD DUMP MODE BEGIN,. DUMP MODE BEGIN... 4.,. : ( ), OUT OF DUMP MODE.... 22
4-5. ( )., ( ). 1.. 2. Pause. 3. (Pause ), 3 LCD Auto Sensing mode, Pause.. 4. LCD.. 23
4-6. printing mode, options, media type, parallel interface ( PC, USB, ). 1., Ready. 2. Pause Feed LCD Setting Mode.. 3. Setting Mode,. 4. : Feed Key : Pause Key : Cancel Key : 5.. 6... Printing mode : Thermal Transfer:. Direct Thermal:.. Option Set : Stripprt mode:. Cutter mode:. Option OFF:.. Paper Set : COM Port Set : Auto Sensing Setting Review: LCD Language Black Mark:. Gap Paper:.. Plain Paper:. Baud Rate: 300/ 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400 bits, : 9600 bits Parity Set: None / Odd / Even Parity, default: None Parity Data Lengh: 7 / 8 bits, default: 8 bits Stop bit: 1 / 2 bits, default: 1 bit Auto mode: (,, ) Gap mode: Black mode: English Simplied Chinese Traditional Chinese : (1) Default Setting.. (2),. 24
4-7.. LCD Print Head is opened Entering the Cooling Process Out of ribbon or check ribbon sensor Out of media or check media gap sensor Check paper setting Command is not recognized LED Green Green Green Green Green Green Red Red Red Red Red Red Memory is full Green Red Filename can not be found Filename is repeated Green Green Red Red 4 beeps twice 3 beeps twice 2 beeps twice 2 beeps twice.......,... :,,,.. 2 beeps. twice 2 beeps twice 2 beeps twice 2 beeps twice () Use ~X4.. 25
Chapter 5. 5-1. ( ),,.,. : 1.. 2.. 3.. 4. ( ). : (1). (2). 5-2... 1.. 2.. 3... (); (). 26
5-3.,. ( 2 ),.,. 5-4. 1. ( A ). 2.. 3mm. 3.. : 35mm. 27
5-5. LCD. LED (/)......( ) /. ( )................ ~T............. 0.16mm........ :. 28