120 V AC, 50/60 Hz : 52 W (with no optional accessories installed), indicates safety information. 70 W (with all optional accessories installed) : : (WxHxD) : : 41 F to 104 F (+ 5 C to + 40 C) Less than 80% (relative humidity) 16-3/4 k 7-3/4 k 15-3/4 inch (424 k 197 k 400 mm) 8.2 kg (with no optional accessories installed) 8.7 kg (with no optional accessories installed) [ ] Video format : Quantization : 525 (NTSC)/625 (PAL) switchable Main input : 9bit External input (EXT) : 8bit Internal processing : 4:2:2:4 8 bits(on/off switching for Dynamic Rounding processing enabled) Key : 13.5 MHz Y : 13.5 MHz Pb/Pr : 6.75 MHz S/N ratio : Component signal, Y: Less than -54 db Pb/Pr : Less than-52 db Composite signal, Y/C: Less than -50 db Band width : Main input Y : 0.5 MHz to 4.5 MHz ( 1.0 db) Pb/Pr : 0.2 MHz to 2.0 MHz (+0.5 db to 3.0 db) External input (EXT) Y : 0.5 MHz to 4.5 MHz (1.0 db) Pb/Pr:0.2 MHz to 2.0 MHz (1.0 db) K factor : Less than 1% DG/DP : Less than 4%/2 [ ] Sampling frequency : Quantization : Frequency response : Dynamic range : THD : Cross talk : Headroom: 48 khz Analog Input : 20 bit, Digital Input (option) : 24 bit 20 Hz to 20 khz(-1.0 db to +1.0 db) More than 85dB (analog In/out) Less than 0.05% (1 khz) Less than 70 db (1 khz, between any two channels) 20 db/18 db switchable
[ / ] Analog component input/output connectors : BNC 4 (sources 1/2/3/4) Y: 1.0 Vp-p, 75 Pb/Pr (525): 0.525/0.757 Vp-p switchable, 75 Pb/Pr (625): 0.7 Vp-p, 75 Analog composite input/output connectors : BNCx8 (sources 1 to 8), 1.0 Vp-p, 75 YC input/output connectors : Mini-DIN4x4 (sources 1/2/3/4) Y: 1.0 VP-P, 75 C: 0.286 VP-P, 75(525)/0.3 VP-P, 75(625) EXT (external input) connector : BNCx1 (Y/Pb/Pr), Analog component signals Y: 1.0 Vp-p, 75 Pb/Pr (525): 0.757 Vp-p, 75 Pb/Pr (625): 0.7 Vp-p, 75 Key: BNC a 1, 1.0 Vp-p, 75 Analog composite signals (genlock possible) G/L input connector : BNCx1 (with loop-through configuration), 1.0 Vp-p, 75 Composite signal (genlock selection enabled from G/L, EXT-Key) Preview output connector : BNCx1, 1.0 Vp-p, 75 Advanced reference input connector : BNCx1 (with loop-through configuration), 75, composite signals Sync: 0.286 Vp-p (525)/0.3 VP-P (625) Burst: 0.286 Vp-p (525)/0.3 Vp-p (625) [ / ] Analog audio (L/R) connectors : AUX input (L/R) connectors : Audio output (L/R) connectors : Mic input jack: Headphone output jack: XLRx4 sets, +4/0/-3 dbu switchable, 10 k, balanced RCAx2 sets, -10dBV, 10 k, unbalanced(aux2 switchable with MIC) Program 1: XLRx1 set, +4/0/-3 dbu switchable, 47, balanced Program 2: RCAx1 set, 10 dbv, 47, unbalanced M6x1, -60 dbv, 2 k, unbalanced (switchable with AUX2) M6x1, 8 k, unbalanced [ ] Editor : D-sub 9-pin, RS-422A/232C switchable RS-422A protocol; GVG/Sony switchable Connectable Editor : Panasonic: AG-A850, AJ-A900, SONY: BVE-2000, BVE-910, PVE-500 Tally Out : D-sub 9-pin, open-collectorx8 ch Collector current: Less than 50 ma, Maximum voltage: 35 V DC GPI : BNC k 1, Make-contact USB : Type-B connectorx1, USB Ver.1.1 (cable length: max. 3 m)
[SDI]( ) Video input connectors : BNC a 4 (inputs 1/2/3/4), SMPTE 259M-C/EBU Tech.3267-E Video output connectors : BNC a 1, SMPTE 259M-C/EBU Tech.3267-E Audio input connectors : Embedded audio (channels 1/2, 3/4, 5/6, 7/8 switchable) Audio output connectors : Embedded audio (channels 1/2) [ ] Power cable...1 Operating Instructions...1 MX-Navi installation CD...1 Warranty card...1
(SDI interface board: optional accessory) [AG-VE70] (3D effect board: optional accessory) Power Source : Power Consumption : indicates safety information. Operating temperature : DC 5 V, 3.3 V 6.3 W 41 F to 104 F (+ 5 C to + 40 C) Operating humidity : Less than 80% Standard : SMPTE-259M-C standard complied with Power Source: Power Consumption: DC 5 V, 3.3 V 6.1 W indicates safety information. Operating temperature: 41 F to 104 F (+ 5 C to + 40 C) Operating humidity: Less than 80%
AVS : 02) 6670-5210~5215 / 02) 6670-5220~5223 / 02) 6670-5230~5234 : 02) 6670-5114