LOW DUST LOW NOIS L HIN! Min Max nsb 020R lean Room Type nsb020r, nsb022r nsb028r, nsb035r rames are assembled at every link. nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Low Noise: TUV Test 30 d (DIN N61672-1) Load diagrams self-supporting length 0.5m 1m 1.5m 1.8m Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m/sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above= max 1.0m Vertical curve below= max 5m Side Mounted, Unsupported= max 0.5m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 3.6m alculation of the chain length 236 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R - - 28 38 48 Lp Lf H - - - ORDRING RKT TYP - - - 162 76 79 1 2 202 90 99 (ree nd racket) 242 105 119 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 020R Type Pitch P: 20mm Height : 22mm Height H: 2R+23mm Hs H+30mm 1: 10.5mm 2:11.5mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX *bove products are patent registered item which can be protected by industrial property right. www.cpsystem.co.kr 237
LOW DUST LOW NOIS L HIN! nsb 020R lean Room Type HIN ROSS STION 2 D hain Type D ending Radius(R) Weight in kg/m nsb 020R.20 nsb 020R.40 34 54 20 22 28, 38, 48 40 0.32 0.35 R ND RKT 2-5(M4olt Holes) 2-5(M4olt Holes) 2-5(M4olt Holes) +10 +10 D 42 41 +10 22 14 14 22 4 22 16 22 4 nsb020r ixing point nsb020r Moving point nsb020r ront point hain Type D Hole Type nsb 020R.20 nsb 020R.40 38 58 20 22-40 M4 olt Holes 238 www.cpsystem.co.kr
DIVIDRS TI WRP Dividers (Vertical) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separate from each other. The use of the dividers can reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule there needs to be at least 10% space between the inserted cable and its enclosure. lso, for nsb020r and 022R, Separators (Horizontal) are not used but dividers (Vertical) are only used to divide space in the inner chamber of the cable chain. nsb020r DV-M ttach to racket ( ) nsb-tw020.20 nsb-tw020.40 21.9 7 The Tie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. www.cpsystem.co.kr 2 8.1 10 2 11 8 SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 239
LOW DUST LOW NOIS L HIN! Min Max nsb 022R lean Room Type nsb020r, nsb022r nsb028r, nsb035r rames are assembled at every link. nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Load diagrams self-supporting length 0.5m 1m 1.5m 1.8m Low Noise: TUV Test 30 d (DIN N 61672-1) Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m / sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above= max 1.0m Vertical curve below= max 5m Side Mounted, Unsupported= max 0.5m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 3.6m alculation of the chain length 240 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 35 45 100 120 Lp Lf H 222 108 106 ORDRING RKT TYP 266 125 126 353 2 186 1 2 (ree nd racket) 485 192 276 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 022R Type Pitch P: 22mm Height : 29mm Height H: 2R+36mm Hs H+30mm 1: 11mm 2:18mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX bove products are patent registered item which can be protected by industrial property right. 241 www.cpsystem.co.kr 241
LOW DUST LOW NOIS L HIN! nsb 022R lean Room Type HIN ROSS STION 2 D hain Type D ending Radius(R) Weight in kg/m nsb 022R.16 nsb 022R.27 nsb 022R.37 nsb 022R.47 nsb 022R.67 nsb 022R.77 30 41 51 61 81 91 16 27 29 37 47 22 35, 45,, 100, 120 67 77 0.43 0.47 0.51 0.55 0.67 0.69 R ND RKT 16 2-5(M4olt Holes) 2-5(M4olt Holes) 16 +10 29 19 43.1 43.8 19 29 +10 2-5(M4olt Holes) +10 D 5 22 16.1 16.8 22 5 nsb022r ixing point nsb022r Moving point nsb022r ront point hain Type D Hole Type nsb 022R.16 nsb 022R.27 nsb 022R.37 nsb 022R.47 nsb 022R.67 nsb 022R.77 34 45 55 65 85 95 29 16 27 37 47 67 77 22 12 23 33 43 63 73 242 www.cpsystem.co.kr
LOW DUST LOW NOIS L HIN! Min Max nsb 028R lean Room Type nsb020r, nsb022r nsb028r, nsb035r rames are assembled at every link. nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Low Noise: TUV Test 30 d (DIN N 61672-1) Load diagrams self-supporting length 0.5m 1m 1.5m 2m 2.5m 3m 3.5m Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m / sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above= max 2.0m Vertical curve below= max 40m Side Mounted, Unsupported= max 1.0m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 4m 5m 6m 7m alculation of the chain length 244 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 50 70 90 120 0 Lp Lf H 311 149 146 ORDRING 367 135 186 422 182 226 1 2 533 221 286 (ree nd racket) 589 232 346 RKT TYP Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 028R Type Pitch P: 28mm Height : 38mm Height H: 2R+46mm Hs H+30mm 1: mm 2: 23mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX bove products are patent registered item which can be protected by industrial property right. www.cpsystem.co.kr 245
LOW DUST LOW NOIS L HIN! nsb 028R lean Room Type HIN ROSS STION 3.2 3.2 D hain Type D ending Radius(R) Weight in kg/m nsb 028R.035 nsb 028R.050 nsb 028R.055 nsb 028R.0 nsb 028R.100 nsb 028R.125 nsb 028R.0 nsb 028R.1 nsb 028R.200 55 70 95 120 145 170 195 220 35 50 55 38 100 26 50, 70, 90, 120, 0 125 0 1 200 0.90 0.98 1.02 1.12 1.27 1.41 1.59 1.74 1.84 R ND RKT 4-5.6(M5olt Holes) 4-5.6(M5olt Holes) +14-20 -20 +14 2-5.6(M5olt Holes) D 38 29 52.2 56 29 38 +14 4.2 22.9 25.1 28.9 22.9 4.2 nsb028r ixing point nsb028r Moving point nsb028r ront point hain Type D Hole Type nsb 028R.035 nsb 028R.050 nsb 028R.055 nsb 028R.0 nsb 028R.100 nsb 028R.125 nsb 028R.0 nsb 028R.1 nsb 028R.200 63 78 83 103 128 3 178 203 228 38 35 50 55 100 125 0 1 200 26 0 20 40 65 90 1 140 165 M5 olt Holes 246 www.cpsystem.co.kr
DIVIDRS & SPRTORS DV-S () DV-M Separator(SP) Dividers (Vertical) and Separators (Horizontal) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separated from each other. The use of a separator in some cases, can also reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule, there needs to be at least 10% space between the inserted cable and its enclosure. nsb028r DV-M nsb028r Separators (SP) hain Type nsb028r nsb035r Separators TI WRP ttach to racket ( ) 33 26 2.1 9.7 13 16.6 4.9 3.2 9.6 3.2 nsb028r DV-S 33 26 2.1 13 9.6 6.2 16.6 SP 035 SP 050 SP 055 SP 0 SP 100 SP 125 SP 0 SP 1 SP 200 The Tie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. There are two types in the tie wrap; ttached & Unattached to the brakcet. 10 6 12 (Dimensions in mm) Tie Wrap 035 055 0 100 125 46 35.4 70 48.9 9.7 94 48.9 4.9 3 18.9 4 3 118 48.9 142 48.9 SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 247
LOW DUST LOW NOIS L HIN! Min Max nsb 035R lean Room Type nsb020r, nsb022r nsb028r, nsb035r nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Low Noise: TUV Test 30 d (DIN N 61672-1) Load diagrams self-supporting length 0.5m 1m 1.5m 2m 2.5m 3m 3.5m Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m / sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above= max 3.0m Vertical curve below= max 50m Side Mounted, Unsupported= max 1.0m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 4m 5m 6m 7m alculation of the chain length 248 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 100 125 0 200 Lp Lf H 471 226 218 ORDRING RKT TYP 550 251 268 628 276 318 1 2 706 301 368 (ree nd racket) 863 351 468 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 035R Type Pitch P: 35mm Height : 52mm Height H: 2R+68mm Hs H+30mm 1: 18mm 2: 34mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. bove products are patent registered item which can be protected by industrial property right. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 249
nsb 035R HIN ROSS STION LOW DUST LOW NOIS L HIN! lean Room Type 3.2 3.2 D hain Type D ending Radius(R) Weight in kg/m nsb 035R.035 nsb 035R.050 nsb 035R.055 nsb 035R.0 nsb 035R.100 nsb 035R.125 nsb 035R.0 nsb 035R.1 nsb 035R.200 55 70 95 120 145 170 195 220 35 50 55 52 100 40, 100, 125, 0, 200 125 0 1 200 1.00 1.06 1.09 1.17 1.29 1.39 1.53 1.65 1.73 R ND RKT 8-6.5(M6olt Holes) 8-6.5(M6olt Holes) +17-14 10.5 25 25 10.5-14 +17 4-6.5(M6olt Holes) 18 D 16 16 52 40 67.5 70.5 40 52 +17 7 33 27.5 30.5 33 7 nsb035r ixing point nsb035r Moving point nsb035r ront point hain Type D Hole Type nsb 035R.035 nsb 035R.050 nsb 035R.055 nsb 035R.0 nsb 035R.100 nsb 035R.125 nsb 035R.0 nsb 035R.1 nsb 035R.200 64 79 84 104 129 4 179 204 229 52 35 50 55 100 125 0 1 200 40 3 18 23 43 68 93 118 143 168 M6 olt Holes 250 www.cpsystem.co.kr
DIVIDRS & SPRTORS DV-S () DV-M Separator(SP) Dividers (Vertical) and Separators (Horizontal) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separated from each other. The use of a separator in some cases, can also reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule, there needs to be at least 10% space between the inserted cable and its enclosure. nsb035r DV-M nsb035r Separators (SP) hain Type nsb028r nsb035r Separators TI WRP ttach to racket ( ) 47 40 2.1 28N DV/M 9.7 13 17.2 7.9 3.2 9.6 3.2 nsb035r DV-S 47 40 2.1 13 9.6 6.2 17.2 SP035 SP050 SP055 SP0 SP100 SP125 SP0 SP1 SP200 The Tie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. There are two types in the tie wrap; ttached & Unattached to the brakcet. 9.7 7.9 Tie Wrap for the Sabin hain nsb035 series, the range of the corresponding frame sizes will be 50,, 100, 125, 0, 1 and 200mm respectively. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 251
LOW DUST LOW NOIS L HIN! Min Max nsb 045R lean Room Type nsb020r, nsb022r nsb028r, nsb035r nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Load diagrams self-supporting length 0.5m 1m 1.5m 2m 2.5m 3m 3.5m Low Noise: TUV Test 30 d (DIN N 61672-1) Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m/sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above, Unsupported= max 6.0m Vertical curve below, Unsupported= max 100m Side Mounted, Unsupported= max 2.5m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation.. Kg/m Stroke 1m 2m 3m 4m 5m 6m 7m alculation of the chain length 252 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 100 120 140 200 250 300 Lp Lf H 587 279 243 ORDRING 665 304 293 RKT TYP 728 324 333 791 344 373 1 2 979 404 493 1,136 454 593 (ree nd racket) 1,293 504 693 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 045R Type Pitch P: 45mm Height : 70mm Height H: 2R+93mm Hs H+40mm 1: 23.5mm 2: 46.5mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX bove products are patent registered item which can be protected by industrial property right. www.cpsystem.co.kr 253
LOW DUST LOW NOIS L HIN! nsb 045R lean Room Type HIN ROSS STION 5 7 D hain Type D ending Radius(R) Weight in kg/m nsb 045R.050 nsb 045R.0 nsb 045R.100 nsb 045R.125 nsb 045R.0 nsb 045R.1 nsb 045R.200 nsb 045R.250 nsb 045R.300 80 105 130 5 180 205 230 280 330 50 100 125 70 0 49 1 200 250 300, 100, 120, 140 200, 250, 300 2.59 2.74 2.90 3.11 3.31 3.48 4.18 4.76 5.32 R ND RKT 8-6.2(M6olt Holes) 8-6.2(M6olt Holes) +12-11 34 34 11 - +12 4-6.2(M6olt Holes) 25 D 1918 1819 70 56 25 96 97 25 56 70 +12 7 41 26 26 41 7 nsb045r ixing point nsb045r Moving point nsb045r ront point hain Type D Hole Type nsb 045R.050 86 50 10 nsb 045R.0 111 35 nsb 045R.100 136 100 60 nsb 045R.125 161 125 85 nsb 045R.0 186 70 0 49 110 M6 olt Holes nsb 045R.1 211 1 135 nsb 045R.200 236 200 160 nsb 045R.250 286 250 210 nsb 045R.300 336 300 260 254 www.cpsystem.co.kr
DIVIDRS DV-S () DV-M ( ) DV-R ( ) Separator(SP) Dividers (Vertical) and Separators (Horizontal) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separated from each other. The use of a separator in some cases, can also reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule, there needs to be at least 10% space between the inserted cable and its enclosure. nsb045r DV-S 64.8 49 3.8 SPRTORS Separator (SP) TI WRP 4.4 13 21 11.5 nsb045r DV-M 64.8 49 3.8 (Dimensions in mm) Tie Wrap 050 0 100 125 0 20~300MM 58 65 82 98 105 Separator Pin (SP-Pin) 122 129 141 148 4.4 13 21 14.6 50 7 nsb045r DV-R 64.8 49 3.8 13 21 4.4 14.6 Separator is available in length from 20mm to 300mm and can be cut every 5mm for use. The combined use of divider and sepatator with the pin creates the most effective cable pattern and keep insertion space for cables safely, so it protects the inserted cables. 4.5 4.5 3. 3. 27 The Tie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. There are two types in the tie wrap; ttached & Unattached to the bracket. 8.2 SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 255
LOW DUST LOW NOIS L HIN! Min Max nsb 060R lean Room Type nsb020r, nsb022r nsb028r, nsb035r nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Low Noise: TUV Test 30 d (DIN N61672-1) Load diagrams self-supporting length 0.5m 1m 1.5m 2m 2.5m 3m 3.5m Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m / sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above, Unsupported= max 6.0m Vertical curve below, Unsupported= max 100m Side Mounted, Unsupported= max 3.0m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 4m 5m 6m 7m alculation of the chain length 256 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 125 140 190 220 270 390 Lp Lf H 854 389 358 ORDRING 901 404 388 RKT TYP 1,058 454 488 1 2 1,2 484 548 1,309 574 648 (ree nd racket) 1,686 654 888 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 060R Type Pitch P: 60mm Height : 82mm Height H: 2R+108mm Hs H+40mm 1: 28mm 2: 54mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX bove products are patent registered item which can be protected by industrial property right. www.cpsystem.co.kr 257
LOW DUST LOW NOIS L HIN! nsb 060R HIN ROSS STION lean Room Type 5 7 D hain Type D ending Radius(R) Weight in kg/m nsb 060R.0 nsb 060R.100 nsb 060R.125 nsb 060R.0 nsb 060R.1 nsb 060R.200 nsb 060R.250 nsb 060R.300 nsb 060R.350 nsb 060R.400 1 140 165 190 2 240 290 340 390 440 100 125 0 82 1 200 56 250 300 350 400 125, 140, 190, 220 270, 390 3.56 3.66 3.97 4.16 4.33 4.64 5.06 5.48 6.09 6.66 R ND RKT 8-10(M10olt Holes) 8-10(M10olt Holes) + -25-25 + 4-10(M10olt Holes) 26 44 44 26 25 D 82 62 25 134 143 25 62 82 + 10 72 26.6 26.4 72 10 nsb060r ixing point nsb060r Moving point nsb060r ront point hain Type D Hole Type nsb 060R.0 nsb 060R.100 nsb 060R.125 nsb 060R.0 nsb 060R.1 nsb 060R.200 nsb 060R.250 nsb 060R.300 nsb 060R.350 nsb 060R.400 1 140 165 190 2 240 290 340 390 440 82 100 125 0 1 200 250 300 350 400 66 24 49 74 99 124 149 199 249 299 349 M10 olt Holes 258 www.cpsystem.co.kr
DIVIDRS DV-S () DV-M ( ) DV-R ( ) Separator(SP) Dividers (Vertical) and Separators (Horizontal) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separated from each other. The use of a separator in some cases, can also reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule, there needs to be at least 10% space between the inserted cable and its enclosure. nsb060r DV-S 76.8 56 3.8 SPRTORS Separator (SP) TI WRP 18 25.4 4.4 nsb060r DV-M 76.8 56 3.8 (Dimensions in mm) Tie Wrap 050 0 100 125 0 20~400MM 58 65 82 11.5 98 105 Separator Pin (SP-Pin) 122 129 141 148 18 25.4 50 4.4 7 14.6 nsb060r DV-R 76.8 56 The Ttie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. There are two types in the tie wrap; ttached & Unattached to the bracket. 3.8 18 25.4 4.4 14.6 Separator is available in length from 20mm to 400mm and can be cut every 5mm for use. The combined use of divider and sepatator with the pin creates the most effective cable pattern and keep insertion space for cables safely, so it protects the inserted cables. 4.5 4.5 3. 3. 27 8.2 SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 259
LOW DUST LOW NOIS L HIN! Min Max nsb 0R lean Room Type nsb020r, nsb022r nsb028r, nsb035r nsb045r, nsb060r, nsb0r MTRIL hain material: PS-amide UL94-H Load diagrams self-supporting length 0.5m 1m 1.5m 2m 2.5m 3m 3.5m Low Noise: TUV Test 30 d (DIN N61672-1) Low Mote: IP Test VDI 2083 LSS 1 DIN N 14644-1 ISO LSS 3 Speed : m/sec Temperature : -40 ~ +130 Other installation Length: Vertical curve above, Unsupported= max 6.0m Vertical curve below, Unsupported= max 100m Side Mounted, Unsupported= max 3.0m pplications pplied to clean room for LD/PDP and Semiconductor production Line requested Dust Requlation LSS10, furthermore to utomation Machine Tool and Industrial Machinery needed high speed operation. Kg/m Stroke 1m 2m 3m 4m 5m 6m 7m alculation of the chain length 260 www.cpsystem.co.kr L = Ls 2 + Lp
LYOUT O TH HIN (Dimensions in mm) ending radius R 180 200 250 300 350 400 500 Lp Lf H 1,147 5 504 ORDRING 1,210 535 544 RKT TYP 1,367 585 644 1,524 635 744 1 2 1,681 685 844 1,838 735 944 (ree nd racket) 2,2 835 1,144 Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space nsb 0R Type Pitch P: mm Height : 108mm Height H: 2R+44mm Hs H+40mm 1: 36mm 2: 72mm Qty(set) Length(mm) ree nd racket ending Radius Inside Width lean Room Type New Sabin hain ixes the cable chain to the machinery or moving application. PS has improved mounting efficiency by unifying the existing asy nd racket and Normal nd racket. SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX bove products are patent registered item which can be protected by industrial property right. www.cpsystem.co.kr 261
nsb 0R HIN ROSS STION LOW DUST LOW NOIS L HIN! lean Room Type 5 7 D hain Type nsb 0R.0 nsb 0R.100 nsb 0R.125 nsb 0R.0 nsb 0R.1 nsb 0R.200 nsb 0R.250 nsb 0R.300 nsb 0R.350 nsb 0R.400 nsb 0R.450 nsb 0R.500 nsb 0R.550 nsb 0R.600 1 140 165 190 2 240 290 340 390 440 490 540 590 640 100 125 0 1 200 82 250 300 56 350 400 450 500 550 600 D ending Radius(R) Weight in kg/m 180, 200, 250, 300 350, 400, 500 5.37 5.57 5.82 6.01 6.26 6.68 7.22 7.94 8.67 9.43 10.01 10.41 11.88 12.17 R ND RKT 8-10(M10olt Holes) 8-10(M10olt Holes) +29-28 -28 +29 4-10(M10olt Holes) 24 50 50 24 46 D 164 164 108 84 46 12 77 37.45 46 84 37.45 77 12 108 +29 nsb0r ixing point nsb0r Moving point nsb0r ront point hain Type D Hole Type nsb 0R.0 nsb 0R.100 nsb 0R.125 nsb 0R.0 nsb 0R.1 nsb 0R.200 nsb 0R.250 nsb 0R.300 nsb 0R.350 nsb 0R.400 nsb 0R.450 nsb 0R.500 nsb 0R.550 nsb 0R.600 125 0 1 200 225 250 300 350 400 450 500 550 600 650 108 100 125 0 1 200 250 300 350 400 450 500 550 600 78 40 65 90 1 140 190 240 290 340 390 440 490 540 M10 olt Holes 262 www.cpsystem.co.kr
DIVIDRS DV-S () DV-M ( ) DV-R ( ) Separator(SP) Dividers (Vertical) and Separators (Horizontal) divide the inner chamber of the cable chain to give each cable diameter its own center and keep the cables separated from each other. The use of a separator in some cases, can also reduce the width requirements as two or more levels can be made within the same chamber. To prevent twisting or damage to the cables, as a rule, there needs to be at least 10% space between the inserted cable and its enclosure. nsb0r DV-S 100.8 78 3.8 SPRTORS Separator (SP) TI WRP 26 35 6.4 11.5 nsb0r DV-M 100.8 78 3.8 (Dimensions in mm) Tie Wrap 050 0 100 125 0 20~600MM 58 65 82 98 105 Separator Pin (SP-Pin) 122 129 141 148 50 6.4 7 26 35 14.6 nsb 0R nsb0r DV-R 100.8 78 The Tie Wrap separated from the Sabin hain bracket, when installed properly, protects the inserted cables from becoming entangled and twisted during operation. There are two types in the tie wrap; ttached & Unattached to the bracket. 3.8 lean Room Type 26 35 6.4 14.6 Separator is available in length from 20mm to 600mm and can be cut every 5mm for use. The combined use of divider and sepatator with the pin creates the most effective cable pattern and keep insertion space for cables safely, so it protects the inserted cables. 4.5 4.5 3. 3. 27 8.2 SHIT HIN SIN HIN RVOLVING HIN HLIX HIN ROO-KIT PSLX PSIX www.cpsystem.co.kr 263