The Series Pendulum Impact 601 & 602 Analog Tester For Regular DTI-602B (Izod) DTI-601 (Charpy) DTI-602A (Izod) SPECIFICATIONS Model DTI-601 DTI-602 Type Charpy for plastics lzod for plastics Capacity (Max.) (30, 60, 153.3)kgf.cm / (3, 6, 15.3)J Readout Analog coded dial Raised angle 140 120 Pendulum weight (App.) 800g(1.76lbs) 2440g(5.38lbs) Standards Compliance / Exceeds ASTM E23, ASTM D6110(Charpy), ASTM D256(lzod), Accuracy ISO 179(Charpy) and ISO17025 Power Supply N/A N/A Machine Dimension (500 400 400)mm (560 400 450)mm (19.67 15.75 15.75)in (22.05 15.75 17.72)in Machine Weight 48 50kg (110.23lbs)
Advantages of DTI-603B Impact Testing Machine Manufactured in compliance with ASTM Standard Variety of capacity products available by custom s needs PC based Control Connecting through USB Port Comparison between Analog Value & PC Measuring Data Value available Automatic Stop after hitting test piece, automatically returning to initial position Able to check the machine operation status with LED Display Measured Data Storage & Report Card Print-Out available connecting with PC Built-in 32BIT DATA ACQUISITION CONTROLLER with 24BIT Resolution Programming Advantages Hammer Angle Indication Impact Strength Indication Averge Impact Strength Value Output Minimum / Maximum Impact Strength Output Automatic Excel Spreadsheet Conversion Function Unit Conversion Function DTI-603B 49 Material Tester Tester Charpy & Izod
OPTION OPTION SPECIFICATIONS Model DTI-603B Type Charpy & lzod for metal and etc. Capacity (Max.) (10~75) kgf.m / (100~750) J Readout Digital display Raised angle 140 Pendulum weight (App.) 20 kg(44.1lbs) or more Standards Compliance / Exceeds ASTM E23, Accuracy ASTM D6110(Charpy), ASTM D256(lzod), ISO 179(Charpy) and ISO17025 Power Supply 220V, 50/60Hz, 4A Machine Dimension (1550 1000 1500) mm (61.02 39.37 59.06) in Machine Weight 50 1100 kg (2425.1lbs) or more
Material Tester The Impact Data Acquisition and Analysis System IMPACT SOFTWARE The Impact data acquisition and analysis system software shows Impact energy and stress on real time with selectable unit. The system shows start and maximum angles and real time graph. And more things are show one program. The friction loss originated from machine itself can be corrected by a coefficient on calibration mode of the software application system. TEST REPORT Test Description Data, Test name, Operator, Material, Lot mumber, Temperature, Remark, etc. Result Data Data number, Raise Angle, Max Angle, Section, Shock (Impact energy), Impact strees, Average, Unit International SI Unit 100 data save Related with Excel program 51
Full-sized impact tester cover 완벽한 안전성을 보장하는 풀사이즈 8각형 커버입니다. 도어를 여는 경우 자동으로 추의 움직임을 멈추어 안전성을 더하였습니다. 강화 플라스틱을 사용하여 안전함과 함께 깨끗한 시야를 확보할 수 있습니다. Full-sized octagon cover to guarantee perfect stability; When the door opens, the weight stops moving automatically and so the stability is improved; Ensure safety and clear visibility by using reinforced plastics. 52
Drop Impact Tester Material Tester DTI-700 An additional device is attached to the free-falling type impact tester and so this system can test and measure the acceleration up to 20,000 G. DTI-701 This system is a free-falling type impact tester which can test and measure the acceleration up to 200 G. 53
Drop Impact Tester 낙하 충격 시험기 DTI-702 ACCELERATION MAX. 6,000 G CONTROL SEMI-AUTO, MANUAL DROP HEIGHT (50 ~ 1,500) mm RELEASE ELECTRIC CATCHER CALCULATIONS ACCELERATION, VELOCITY, ENERGY TABLE SIZE (500 600) mm DETECTOR G SENSOR, (100 ~ 6,000) G LIFT MECHANISM ELECTRIC WINCH 자유낙하방식의 충격시험기로 최대 6,000G까지 가속도를 시험, 측 정 할 수 있도록 제작 되었습니다. This system is a free-falling type impact tester which can test and measure the acceleration up to 6,000 G. Impact Tester for Glass 유리 충격 시험기 DTI-703 54 TYPE PENDULUM SWING (0 ~ 120) CONTROL SEMI-AUTO, MANUAL RELEASE ELECTRIC CLUTCH CALCULATIONS ACCELERATION, VELOCITY, ENERGY WORKING SIZE 300 mm DETECTOR IMPACT SENSOR (0.1 ~ 1 kn) LIFT MECHANISM 2 MOTION SERVO MOTOR 진자충격방식의 충격시험기로 자동으로 반복충격이 가능하며 최대 1kN까지 충격하중을 시험, 측정 할 수 있도록 제작 되었습니다. This system is an electronic impact tester which can test and measure the acceleration up to 20 G with impact repeated automatically.