SC 7300.pub

PARTS BOOK SC 7300 Cylinder Bed, Inter Lock Chain Stitch Machine PME-110318 SunStar CO., LTD.

Information A. Parts Book 구성 Structure of Part Book 1 2 3 4 5 6 7 8 9 1: 관계별고유코드 Unique code by mechanism 2: 관계별고유명칭 Unique name by mechanism 3: 관계도 Explode view 4Ref.No: 파트별고유식별번호 Unique identification number by part 5Parts No.: 고유제품코드 Unique Product code Ex) 구분 Code Category 구부품 Old part 01-030C-1230 신부품 New Part AS-000000-00 GP-000000-00 EP-000000-00 6Note: 공지사항표기및메모 Refers to notice and memo 7품명 : 파트의고유품명 Name of Part:Unique name of parts 8Q ty : 파트의수량 The number of parts 9Assembly no.: 조 ( 組 ) 파트의식별번호 Unique identification number by set part 비고 remarks 조 ( 組 ) 파트 Set parts 기구적파트 Instrumental parts 전기적파트 Electrical parts

Warning 1. 조에속한파트는개별조립시제품의파손또는재봉불량이발생될수있어해당파트에대한주문시에는조품목으로만구입이가능합니다. 2. 본책자는 Parts Book으로제작되었으므로매뉴얼로사용불가합니다. 3. 사전예고없이사양이변경될수도있습니다. 1. The parts classified as ass y items may cause damage to the machine or bad sewing when they are separately assembled. Hence, when they are ordered, they can be purchased as ass y items only. 2. This is a parts book. It cannot be used as a manual. 3. Parts are Subject to change in Design Without Prior Notice.

Material Main Motor Shape of Stitch Plate None Standard C Fortuna Ⅳ Motor G Standard H Heavy Material N Fortuna Ⅲ Motor L For long stitch (longer than 2.5mm) M Clutch Motor S For short stitch (shorter than 1.8mm) Bed Type & No. of Needle 7300 Cylinder Bed-3Needle 7200 Cylinder Bed-2Needle Symbol of Series Sunstar Chain Stitch M/C Needle Space 32 3.2mm 40 4.0mm 48 4.8mm 56 5.6mm 64 6.4mm MODEL SC 7300H/C SPEC. 156G DEVICE UT-A/ / Attachment (Option) Top Cover Thread 0 Without Top Cover Thread 1 With Top Cover Thread CO HE WK TL Covering guide Hemming guide Walking presser foot See through light for hemming Device UT-A Lower Thread Trimming(Air Pressure 2) UT-B Lower Thread Trimming(Air Pressure 3) ST-C Upper Thread Trimming(Cylinder Bed)(Option) UT-E Lower Thread Trimmer(Electronic)(Cylinder Bed)(option) ST-F Top Cover Thread Trimmer(Electronic) SL Compact spot light TC Needle thread clamp TF-U Upper tape supplying device ETF-U Upper elastic tape supplying device PL-C Puller device / for cylinder bed WT-E Wiper device(electronic) FL-E Foot lifter(electronic) MPL-C Mechanical puller device / for cylinder bed

Class No. Main Motor Shape of Stitch Plate 00 Standard C Fortuna Ⅳ Motor G Standard 01 With Leftend Fabric Trimmer N Fortuna Ⅲ Motor L For long stitch (longer than 2.5mm) S For short stitch (shorter than 1.8mm) Bed Type & No. of Needle 73 Cylinder Bed-3Needle Needle Space 72 Cylinder Bed-2Needle 32 3.2mm 40 4.0mm Symbol of Series 48 4.8mm Sunstar 56 5.6mm Chain Stitch M/C 64 6.4mm MODEL SC 7300/C SPEC. 156G DEVICE UT-B+S/ / Attachment (Option) Top Cover Thread 0 Without Top Cover Thread 1 With Top Cover Thread Device UT-A+S Lower Thread Trimming(Air Pressure 2) UT-B+S Lower Thread Trimming(Air Pressure 3) WK AL EL SL TC Walking presser foot(hemming) Attaching guide for elastic lace See through light for hemming Compact spot light Needle thread clamp ST-C Upper Thread Trimming(Cylinder Bed)(Option)

CONTENTS 목차 I. SC 7300 A Machine Body Mechanism 두부외장관계 8 B Thread Guide, Tension Adjusting Mechanism 실안내및실조절관계 12 C Lower Shaft Mechanism 하축관계 16 D Upper Shaft Mechanism 상축관계 18 E Needle Bar Mechanism 바늘대관계 22 F Presser Foot Mechanism 누름대관계 24 G Spreader Mechanism 스프레더관계 28 H Looper Driving Mechanism 루퍼구동관계 30 I Feed Driving Control Mechanism 피이드조절관계 32 J Feed Driving Mechanism 피이드구동관계 34 K Lubrication Mechanism 급유관계 38 L Thread Stand Mechanism 실패꽂이관계 40 M Accessories Mechanism 액세서리관계 42 N Thread Trimmer Mechanism 1 사절관계-1 44 Thread Trimmer Mechanism 2 O 사절관계-2 46 Thread Trimmer Mechanism 3 P 사절관계-3 48 Thread Trimmer Mechanism 4 Q 사절관계-4 50 Thread Trimmer Mechanism 5 R 사절관계-5 52 S Ⅱ. SC 7310 Compact Motor Mechanism 소형모터관계 54 T1 Machine Body Mechanism-SC 7310 외장관계-SC 7310 56 T2 Presser Bar, Needle Bar, Feed Driving and Pneumatic Mechanism SC 7310 누름대, 바늘대, 피드구동, 공압관계 SC 7310 58 T3 Left Fabric Trimmer Mechanism-SC 7310 좌메스구동관계-SC 7310 60 T4 Suction Mechanism-SC 7310 흡입관계-SC 7310 62

Ⅲ. Option Part 옵션파트 U1 Top Cover Thread Trimmer Mechanism 장식실사절관계 64 U2 Covering Mechanism 커버링관계 66 U3 Hemming Mechanism 헤밍관계 68 U4 Walking Foot Mechanism 워킹노루발관계 70 U5 Compact Spot Light Mechanism 상단램프관계 72 U6 See Through Light Mechanism 하단관계 74 U7 Needle Thread Clamp Mechanism 윗실잡이관계 76 U8-1 Mechanical Type Puller Mechanism 1 (SC 7300/MPL-C) 기계식풀러관계 1 (SC 7300/MPL-C) 78 U8-2 Mechanical Type Puller Mechanism 2 (SC 7300/MPL-C) 기계식풀러관계 2 (SC 7300/MPL-C) 80 U8-3 Mechanical Type Puller Mechanism 3 (SC 7300/MPL-C) 기계식풀러관계 3 (SC 7300/MPL-C) 82 V Gauge Parts 게이지 84 W Heavy Material Mechanism 후믈관계 (SC 7300H) 86 X 4Needle Gauge Mechanism 4본침게이지관계 88 Index 인덱스 90

A Machine Body Mechanism 외장관계 8

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period A-1 CAB-AA002402 Arm 암 1 Nov.07.09 A-1-1 AS-000651-00 Arm&Bed Ass y 암 & 베드 ( 조 ) 1Set A-2 CAB-AB001901 Bed 베드 1 Apr.17.09 A-3 CMB-LA008400 Face Plate 면판 1 A-4 CMB-FC002800 Gasket for Face Plate 면판가스켓 1 A-5 PSC-AC004900 Screw 면판고정나사 (M4 P0.7, L=12) 4 A-6 DPK-CB000700 Rubber Cap for Face Plate 면판고무마개 1 A-7 CMB-LA008501 Top Cover 윗뚜껑 1 A-8 CMB-FC002900 Gasket for Top Cover 윗뚜껑가스켓 1 A-9 PSC-DC000100 Screw 윗뚜껑고정나사 (M4 P0.7, L=12) 7 A-10 DPK-CB002001 Rubber Cap for Top Cover 윗뚜껑고무마개 1 A-11 CLB-JJ000200 Oil Window 유창 1 A-12 DPK-CB000700 Rubber Cap for Arm(Top) 암상면고무마개 4 A-13 DPK-CB000100 Rubber Cap for Arm(Side) 암측면고무마개 1 A-14 DPK-CB000700 Rubber Cap for Arm(Rear) 암후면고무마개 1 A-15 CMB-LA009600 Needle Bar Cover 바늘대실안내커버 1 A-16 CMB-BB005300 Guide for Needle Bar Cover 바늘대실안내커버가이드 1 A-17 DSC-BJ001900 Screw 바늘대실안내커버가이드고정나사 (M4 P0.7, L=7.8) 2 A-18 CMB-FC003000 Rear Cover Gasket for Arm 암후면커버가스켓 1 A-19 CMB-LB004800 Rear Cover for Arm 암후면커버 1 A-20 PSC-AC013000 Screw 암후면커버고정나사 (M4 P0.7, L=8) 6 A-21 DPK-CB001301 Oil Seal 베드후면오일씰 1 A-22 DPK-CB002001 Rear Rubber Cap of Bed 베드후면고무마개 1 A-23 CMB-BJ002700 Eye Guard Bracket A 안전판브라켓 A 1 A-24 PSC-AC007100 Screw 안전판브라켓 A 고정나사 (M4 P0.7, L=7.8) 1 A-25 CMB-BB005000 Eye Guard Bracket B 안전판브라켓 B 1 A-26 DWS-CB000100 Spring Washer for Eye Guard 안전판접시스프링와셔 1 A-27 DSC-FA006100 Stud Screw for Eye Guard Bracket 안전판브라켓단나사 1 A-28 DSN-AA000900 Nut 안전판브라켓고정너트 (11/64 n=40) 1 A-29 CMB-LA008600 Eye Guard 안전판 1 A-30 DWS-AA008500 Washer 안전판고정와셔 (d=3.2, D=6, t=0.5) 2 A-31 DSC-BJ003300 Screw 안전판고정나사 (1/8 n=44, L=6.5) 2 A-32 CMB-FC003200 Gasket for Bed Cover(Left) Bracket 베드커버 ( 좌 ) 브라켓가스켓 1 A-33 CMB-BB005100 Bracket for Bed Cover(Left) 베드커버 ( 좌 ) 브라켓 1 A-34 DSC-BJ000300 Screw 베드커버 ( 좌 ) 브라켓고정나사 (9/64 n=40, L=10) 4 A-35 CMB-BB005200 Hinge for Bed Cover(Left) 베드커버 ( 좌 ) 힌지 1 A-36 DPN-AA006600 Hinge Pin for Bed Cover(Left) 베드커버 ( 좌 ) 힌지핀 1 A-37 DSC-BF005400 Screw 베드커버 ( 좌 ) 힌지고정나사 (M4 P0.7, L=5) 2 A-38 CMB-LA009400 Bed Cover(Left) 베드커버 ( 좌 ) 1 A-39 CMB-BJ003100 Bed Cover(Left) Latch Spring 베드커버 ( 좌 ) 고정판스프링 1 A-40 DSC-BJ001900 Screw 베드커버 ( 좌 ) 고정판스프링나사 (M4 P0.7, L=5) 1 A-41 DPK-CB002100 Rubber Cap for Bed Cover(Left) 베드커버 ( 좌 ) 고무마개 2 A-42 CMB-LA009700 Extension Cover for Bed Cover(Left) 베드커버 ( 좌 ) 확장커버 1 A-43 PSC-AC007100 Screw 베드커버 ( 좌 ) 확장커버고정나사 (M4 P0.7, L=10) 2 A-44 CMB-BA000200 Base for Needle Plate 침판부착베이스 1 A-45 DSC-BF005400 Screw 침판부착베이스고정나사 (M4 P0.7, L=7.8) 2 A-46 DPN-BC002200 Main Feed Regulating Push button 주이송조절버튼 1 A-47 DSP-AA004100 Main Feed Regulating Push button Spring 주이송조절버튼스프링 1 A-48 RI-000016-00 Retaining Ring 주이송조절버튼고정링 ( 호칭경 4, E형 ) 1 A-49 DSC-HB001800 Rod for Fixing Bed Cover(Left) 베드커버 ( 좌 ) 고정봉 1 A-50 ALB-PS001100 Bracket for Oil Defender of Lower Shaft(Ass y) 하축오일막이브라켓 ( 조 ) 1 Set A-50-1 CLB-BB000600 Bracket for Oil Defender of Lower Shaft 하축오일막이브라켓 1 A-50-2 CLB-FZ000200 Oil Defender of Lower Shaft 하축오일막이 1 A-51 DSC-BJ001900 Screw 하축오일막이브라켓 ( 조 ) 고정나사 (M4 P0.7, L=5) 2 A-52 0201SSC-7113 Guide Block of Bed Slide Cover 베드슬라이드커버가이드블록 1 A-53 PSC-AC007100 Screw 베드슬라이드커버가이드블록고정나사 (M4 P0.7, L=8) 2 A-54 DPK-CB002700 Rubber for Guide Block of Bed Slide Cover 베드슬라이드커버가이드블록고무 1 9

A Machine Body Mechanism 외장관계 10

Ref. No. Parts No. Note Name of Parts 품 명 Q ty A-55 CMB-BB005400 Bracket for Front Cover of Bed 베드전면커버브라켓 1 A-56 PSC-DC000100 Screw 베드전면커버브라켓고정나사 (M4 P0.7, L=12) 2 A-57 DSC-FA011300 Hinge for Front Cover of Bed 베드전면커버힌지나사 2 A-58 DWS-AA010600 Washer 베드전면커버힌지나사와셔 (d=5.2, D=10.5, t=1) 2 A-59 PSC-CB000200 Screw 베드전면커버힌지나사고정나사 (M4 P0.7, L=4) 2 A-60 CMB-LA009500 Bed Front Cover 베드전면커버 1 A-61 CMB-LB004900 Extension Cover for Bed Front Cover 베드전면확장커버 1 A-62 PWS-AA001800 Washer 베드전면확장커버고정와셔 ( 호칭경 4) 2 A-63 DSC-BF004100 Screw 베드전면확장커버고정나사 (M4 P0.7, L=7.8) 2 A-64 DSC-BF005400 Screw 베드전면커버스토퍼 (M4 P0.7, L=12) 1 A-65 PSN-AA001500 Nut 베드전면커버스토퍼너트 (M4 P0.7) 1 A-66 DSC-HB001800 Rod for Fixing Bed Cover(Front) 베드전면커버고정봉 1 A-67 CMB-BJ003100 Front Cover Latch Spring 베드전면커버고정판스프링 1 A-68 DSC-BJ001900 Screw 베드전면커버고정판스프링나사 (M4 P0.7, L=5) 1 A-69 CMB-LB005001 Upper Plate(Front) of Bed 베드상면커버 ( 전 ) 1 A-70 DSC-BF004100 Screw 베드상면커버 ( 전 ) 고정나사 A (M4 P0.7, L=12) 2 A-71 PWS-AA001800 Washer 베드상면커버 ( 전 ) 고정나사와셔 ( 호칭경 4) 2 A-72 DSC-BB003000 Screw 베드상면커버 ( 전 ) 고정나사 B (M3 P0.5, L=7) 1 A-73 DSC-BF003900 Screw 베드상면커버 ( 전 ) 고정나사 C (M3 P0.5, L=5) 2 A-74 CMB-LA009800 Looper Cam Cover (Front) 루퍼캠커버 ( 전 ) 1 A-75 DSC-BF005400 Screw 루퍼캠커버 ( 전 ) 고정나사 (M4 P0.7, L=7.8) 2 A-76 CMB-LB006501 Bed Cover Plate 베드덮개판 1 A-77 CMB-FC003301 Gasket of Thread Trimming Base 사절베이스가스켓 1 A-78 DSC-BB003100 Screw 베드덮개판고정나사 (M4 P0.7, L=8) 6 A-79 CMB-LB005100 Upper Cover(R) of Bed 베드상면커버 ( 후 ) 1 A-80 PSC-AC004900 Screw 베드상면커버 ( 후 ) 고정나사 (M4 P0.7, L=12) 2 A-81 CMB-LB005300 Slide Cover of Bed 베드슬라이드커버 1 A-82 CMB-LB005200 Cover for Looper Cam Shaft 루퍼캠축커버 1 A-83 DSC-BJ001900 Screw 루퍼캠축커버고정나사 (M4 P0.7, L=7.8) 2 A-84 CMB-LA009900 Cover for Oil Cooling Fan 오일냉각팬커버 1 A-85 PSC-AC001800 Screw 오일냉각팬커버고정나사 (M4 P0.7, L=7.8) 2 A-86 DSC-HC000500 Bed Support 베드다리 4 A-87 CST-JA001100 Oil Pan 오일팬 1 A-88 PSC-AC005300 Screw 오일팬고정나사 (M8 P1.25, L=20) 4 A-89 CST-FG000200 Oil Pan Gasket 오일팬가스켓 1 A-90 CST-FB000700 Drain Hole Seal 오일배출구고무링 1 A-91 DSC-BJ003400 Screw for Drain Hole 오일배출구나사 1 A-92 PSC-CB000700 Screw 베드실린더부나사 (M6 P1.0, L=6) 1 A-93 GP-001612-00 Machine Number Plate 기번판 1 A-94 01-035P-7400 Pin for Machine Number Plate 기번판고정핀 2 A-95 GP-001652-00 Model Mark 모델마크 1 A-96 01-035P-7400 Pin for Model Mark 모델마크고정핀 2 A-97 PPN-AA000500 Pin for Needle Plate Base 침판부착베이스결합핀 (3 9.4) 2 A-98 PSC-BH000500 Screw 베드전면확장커버나사 (M5 P0.8, L=12) 2 A-99 PWS-AA002800 Washer 베드전면확장커버와셔 2 A-100 GP-003212-00 Rubber for Upper Bed Cover(F) 베드상면커버 ( 전 ) 방진고무 1 A-101 DSC-FA011200 Screw 바늘대실안내커버고정단나사 1 A-102 DWS-CB000300 Spring Washer 바늘대실안내커버스프링와셔 1 A-103 PSN-AA001500 Nut 바늘대실안내커버너트 1 A-104 GP-018205-00 CE Mark CE마크 1 A-105 DPK-CB001301 Oil Seal 베드후면오일씰 1 Assembly No. 11

B Thread Guide, Tension Adjusting Mechanism 실안내및실조절장치관계 1 3 5 6 12

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period B-1 CMB-HK004000 Thread Guide Plate 실안내판 1 B-2 DSC-BF005400 Screw 실안내판고정나사 (M4 P0.7, L=7.8) 2 B-3 CMB-BG000400 Bracket for Thread Eyelet Pipe 실안내파이프브라켓 2 B-5 DSC-BJ001400 Screw 실안내파이프브라켓고정나사 (9/64 n=40, L=6) 2 B-6 GP-001704-01 Thread Eyelet Pipe(R)(Non-Auto Trimmer) 실안내파이프 ( 우 )( 비사절 ) 1 B-7 AS-000323-00 Thread Tension Device(Ass y) 실조절장치 ( 조 )( 비사절 ) 1 Set B-7-1 GP-001705-00 Tension Post Support(Non-Auto Trimmer) 실조절장치베이스 ( 비사절 ) 1 B-7-2 CTA-HK000300 Thread Guide A of Thread Tension Device 실조절장치실안내 A 5 B-7-3 CTA-HK000400 Thread Guide B of Thread Tension Device 실조절장치실안내 B 5 B-7-4 GP-001706-00 Tension Disc Separator(Non-Auto Trimmer) 실조절장치접시열림판 ( 비사절 ) 1 B-7-5 CTA-BA000500 Tension Post Ferrule 실조절장치포스트베이스 5 B-7-6 CTA-HM001300 Tension Post 실조절장치포스트 5 B-7-7 CTA-HL000200 Tension Disc 실조절장치접시 10 B-7-8 CTA-JL000100 Felt for Thread Tension Device 실조절장치펠트 5 B-7-9 CTA-BD000400 Retainer for Thread Tension Spring Cap 실조절장치캡받침 5 B-7-10 DSP-BA001600 Needle Thread Tension Spring 바늘실장력조절스프링 3 Dec.29.08 B-7-11 DSP-BA001700 Top Cover Thread Tension Spring 장식실장력조절스프링 1 B-7-12 DSP-BA001700 Looper Thread Tension Spring 루퍼실장력조절스프링 1 B-7-13 CTA-BN000300 Stopper for Tension Spring 실조절장치스프링스토퍼 5 B-7-14 DSN-CD000300 Thread Tension Spring Cap(Ass y) 실조절장치캡 ( 조 ) 5 Set GP-001461-00 Thread Tension Spring Cap 실조절장치캡 5 GP-001462-00 Bushing for Thread Tension Spring Cap 실조절장치캡붓싱 5 B-8 DSC-BF005400 Screw 실조절장치베이스고정나사 (M4 P0.7, L=7.8) 2 B-9 CMB-BB005600 Bracket for Oil Container 바늘실급유탱크브라켓 1 B-10 PWS-AA001800 Washer 바늘실급유탱크브라켓와셔 ( 호칭경4) 1 B-11 DSC-BF005400 Screw 바늘실급유탱크브라켓고정나사 (M4 P0.7, L=7.8) 1 B-12 DPN-AA007100 Pin for Oil Container Bracket 바늘실급유탱크브라켓고정핀 1 B-13 CMB-JB000400 Oil Tank 바늘실급유탱크 1 B-14 SC-000141-00 Screw 바늘실급유탱크고정나사 ( F형 ST2.2, L=5.5) 2 B-15 CMB-LA010200 Oil Tank Cover 바늘실급유탱크커버 1 B-16 PPN-AF000900 Spring Pin 바늘실급유탱크커버스프링핀 ( 호칭경 2, L=6) 2 B-17 CMB-JL000400 Oil Tank Felt 바늘실급유탱크펠트 1 B-18 CMB-HK004400 Needle Thread Eyelet 바늘실아일렛 3 B-19 DSC-BF001300 Screw 바늘실아일렛고정나사 (3/32 n=56, L=3.8) 3 B-20 CMB-BH000200 Needle Thread Guide 바늘실가이드 1 B-21 PSC-CB001700 Screw 바늘실가이드고정나사 (M4 P0.7, L=10) 1 B-22 CMB-BJ003300 Cover for Needle Thread Take Up 바늘실실채기커버 1 B-23 DSC-BB001100 Screw 바늘실실채기커버고정나사 (M4 P0.7, L=7) 1 B-24 ATA-PS002000 Supplementary Tension Device for Needle Thread(Ass y) 바늘실보조장력조절장치 ( 조 ) 1 Set B-24-1 CTA-BB000800 Needle Thread Retainer Support 바늘실보조장력조절브라켓 1 B-24-2 CTA-BJ001600 Needle Thread Retainer Disc Support 바늘실보조장력조절디스크지지판 1 B-24-3 CTA-HL000900 Needle Thread Retainer Disc 바늘실보조장력조절디스크 1 B-24-4 DSP-AA004200 Needle Thread Retainer Spring 바늘실보조장력조절스프링 1 B-24-5 DSC-FD000800 Screw for Needle Thread Retainer 바늘실보조장력조절나사 1 B-25 DSC-BJ001900 Screw 바늘실보조장력조절브라켓고정나사 (M4 P0.7, L=7.8) 1 B-26 CMB-HK004300 Top Cover Thread Eyelet(Right) 장식실아일렛 ( 우 ) 1 B-27 PWS-AA001800 Washer 장식실아일렛 ( 우 ) 와셔 ( 호칭경4) 1 B-28 DSC-BF005400 Screw 장식실아일렛 ( 우 ) 고정나사 (M4 P0.7, L=7.8) 1 B-29 CMB-HK003900 Top Cover Thread Eyelet(Left) 장식실아일렛 ( 좌 ) 1 B-30 DSC-BF005400 Screw 장식실아일렛 ( 좌 ) 고정나사 (M4 P0.7, L=7.8) 1 B-31 ATA-PS001900 Supplementary Tension Device for Top Cover Thread(Ass y) 장식실보조장력조절장치 ( 조 ) 1 Set B-31-1 CTA-BB000700 Top Cover Thread Guide 장식실가이드 1 B-31-2 CTA-HK000500 Supplementary Guide of Top Cover Thread 장식실보조가이드 1 B-31-3 CTA-HM001400 Post for Controlling Top Cover Thread Tension 장식실보조장력조절봉 1 B-31-4 CTA-HL000800 Supplementary Tension Disc of Top Cover Thread 장식실보조장력조절접시 2 B-31-5 DSP-BA001800 Supplementary Tension Spring for Top Cover Thread 장식실보조장력조절스프링 1 B-31-6 DSN-CD000600 Nut for Top Cover Thread Tension 장식실보조장력조절너트 1 13

B Thread Guide, Tension Adjusting Mechanism 실안내및실조절장치관계 1 3 5 6 14

Ref. No. Parts No. Note Name of Parts 품 명 Q ty B-32 DSC-BF005400 Screw 장식실가이드고정나사 (M4 P0.7, L=7.8) 2 B-33 CMB-BB005500 Bracket for Looper Cam 루퍼캠커버브라켓 1 B-34 DSC-BF005400 Screw 루퍼캠커버브라켓고정나사 (M4 P0.7, L=7.8) 2 B-35 CMB-BJ003400 Stopper for Looper Thread Guide Bracket 루퍼실안내브라켓스토퍼 1 B-36 CTA-HK000600 Looper Thread Sub Guide Bracket 루퍼실보조안내브라켓 1 B-37 CTA-HL000800 Supplementary Tension Disc of Looper Thread 루퍼실보조장력조절접시 2 B-38 DSP-AA004200 Supplementary Tension Spring of Looper Thread 루퍼실보조장력조절스프링 1 B-39 DSC-FD000900 Screw for Looper Thread Sub Guide Bracket 루퍼실보조안내브라켓나사 1 B-40 CMB-LA010100 Looper Cam Cover (Rear) 루퍼캠커버 ( 후 ) 1 B-41 PSC-AC011000 Screw 루퍼캠커버 ( 후 ) 고정나사 (M4 P0.7, L=6) 2 B-42 CMB-BG000500 Holder for Looper Thread Guide Bracket 루퍼실안내브라켓홀더 1 B-43 DSC-BF005700 Screw 루퍼실안내브라켓홀더나사 (M3 P0.5, L=3.5) 2 B-44 CMB-BB005700 Bracket for Looper Thread Guide 루퍼실안내브라켓 1 B-45 DWS-CB000400 Spring Washer for Looper Thread Guide Bracket 루퍼실안내브라켓스프링와셔 1 B-46 DWS-AA000600 Washer 루퍼실안내브라켓와셔 (d=5.3, D=10, t=1) 1 B-47 DSC-FA011401 Stud for Looper Thread Guide Bracket 루퍼실안내브라켓단나사 1 B-48 CMB-HK004700 Looper Thread Guide(Left) 루퍼실안내 ( 좌 ) 1 B-49 DSC-BF011200 Screw 루퍼실안내고정나사 (M2.5 P0.45, L=3.7) 1 B-50 CMB-HK004500 Looper Thread Guide(Middle) 루퍼실안내 ( 중 ) 1 B-51 DSC-BF011100 Screw 루퍼실안내 ( 중 ) 고정나사 (M3 P0.5, L=5) 1 B-52 CMB-HK004600 Looper Thread Guide(Right) 루퍼실안내 ( 우 ) 1 B-53 DSC-BF011200 Screw 루퍼실안내 ( 우 ) 고정나사 (M2.5 P0.45, L=3.7) 1 B-54 CMB-HK004100 Looper Thread Eyelet(Right) 루퍼실아일렛 ( 우 ) 1 B-55 DSC-BF005700 Screw 루퍼실아일렛 ( 우 ) 고정나사 (M3 P0.5, L=3.5) 1 B-56 CMB-HK004200 Looper Thread Eyelet(Left) 루퍼실아일렛 ( 중 ) 1 B-57 DSC-BF005700 Screw 루퍼실아일렛 ( 중 ) 고정나사 (M3 P0.5, L=3.5) 1 B-58 GP-005178-00 Thread Eyelet Pipe(L)(Non-Auto Trimmer) 실안내파이프 ( 좌 )( 비사절 ) 1 Applied Period 15

C Lower Shaft Mechanism 하축관계 2 1 4 5 3 8 9 4-2 4-1 5 9 7 9 10 13 11 16 12 14 18 17 15 18-1 18-2 19 20-4 19 20-1 20-4 20 20-3 20-2 21 22 23 16

Ref. No. Parts No. Note Name of Parts 품 명 Q ty C-1 DPL-AA000500 Pulley for Lower Shaft 하축풀리 1 C-2 DSC-CB001800 Screw 하축풀리고정나사 A(1/4 n=40 L=9) 1 C-3 DSC-CB000400 Screw 하축풀리고정나사 B(1/4 n=40 L=6) 1 C-4 ALS-PS000700 Oil Cooling Fan[Ass y] 오일냉각팬 ( 조 ) 1 Set C-4-1 CLS-BR000100 Oil Cooling Fan 오일냉각팬 1 C-4-2 DBS-DB002700 Bearing Bushing (R) for Lower Shaft 하축후베어링붓싱 1 C-5 PSC-CB000200 Screw 오일냉각팬 ( 조 ) 고정나사 (M4 P0.7, L=4) 2 C-6 PBR-AA004800 Ball Bearing 하축후베어링 (NTN 6205LB NR) 1 C-7 DPL-BA000201 Timming Pulley for Lower Shaft 하축타이밍풀리 1 C-8 DSC-CB001800 Screw 하축타이밍풀리고정나사 A(1/4 n=40 L=9) 1 C-9 DSC-CB000400 Screw 하축타이밍풀리고정나사 B(1/4 n=40 L=6) 3 C-10 BR-000237-00 Ball Bearing 하축중베어링 (NTN 6204LB NR) 1 C-11 CLS-KC001300 Lower Shaft(R) 하축 ( 후 ) 1 C-12 DGR-AG000200 Driving Worm for Oil Pump 오일펌프구동웜 1 C-13 DSC-CB001800 Screw 오일펌프구동웜고정나사 A(1/4 n=40 L=9) 2 C-14 DSC-CB000400 Screw 오일펌프구동웜고정나사 B(1/4 n=40 L=6) 2 C-15 CUS-DB000200 Balance for Lower Shaft 하축밸런스 1 C-16 DSC-BF005400 Screw 하축밸런스고정나사 (M4 P0.7, L7.8) 2 C-17 PBR-AA004900 Ball Bearing 하축전베어링 (NTN 6004Z; 2 O-ring) 1 C-18 AS-000256-00 Lower Shaft(M) [Ass y] 하축 ( 중 ) ( 조 ) 1 Set C-18-1 CLS-KG000100 Lower Shaft(M) 하축 ( 중 ) 1 C-18-2 PPN-AF000900 Spring Pin 스프링핀 ( 호칭경2, L=6) 1 C-19 DSC-CB001000 Screw 하축 ( 중 ) ( 조 ) 고정나사 (1/4 n=40 L=4.5) 2 C-20 AS-000257-00 Lower Shaft(F) [Ass y] 하축 ( 전 ) ( 조 ) 1 Set C-20-1 GP-000868-03 Lower Shaft(F) 하축 ( 전 ) 1 C-20-2 GP-000867-00 Cap 하축 ( 전 ) 유심마개 1 C-20-3 GP-000869-00 Oil Wick 하축 ( 전 ) 유심 (Ø3, L=35) 1 C-20-4 CLB-JL004300 Cap Felt 하축 ( 전 ) 마개휄트 4 C-21 DBS-DA008500 Lower Shaft Front Bushing 하축전붓싱 1 C-22 DBS-DA008600 Lower Shaft Rear Bushing 하축후붓싱 1 C-23 DBS-DA008600 Oil Cap(S) 하축앞붓싱기름구멍마개 (S) 2 Assembly No. 17

18 D Upper Shaft Mechanism 상축관계 43-1 43-2 43-3 6 64 30-2 7 8 9 10 11 12 12 13 14 15 15 16 17 18 19 30-1 31 29 28 27 26 26 25 24 23 22 20 21 32 33 34 35 36 37 39 38 40 41 42 43 44 59 60 61 56 57 58 50 55 53 54 51 52 45 47 48 49 46 19 44 42 12 12 19 19

Ref. No. Parts No. Note Name of Parts 품 명 Q ty D-1 DSC-BB002300 Screw 마개나사 (M6 P1.0, L=16) 1 D-2 DPK-CY000100 Stopper for Upper Shaft Pulley 상축풀리마개 1 D-3 CUS-CP000201 Upper Shaft Pulley 상축풀리 1 D-4 DTC-AK000200 Magnet for Upper Shaft Pulley 상축풀리자석 2 D-5 DSC-CB000400 Screw 상축풀리고정나사 (1/4 n=40 L=6) 2 D-6 BR-000237-00 Ball Bearing 상축후베어링 (NTN 6204LB NR) 1 D-7 DCL-AB001400 Bearing Bushing (R) for Upper Shaft 상축후베어링붓싱 1 D-8 DSC-CB001800 Screw 상축후베어링붓싱고정나사 A(1/4 n=40 L=9) 1 D-9 DSC-CB000400 Screw 상축후베어링붓싱고정나사 B(1/4 n=40 L=6) 1 D-10 PBT-BA000100 Timming Belt 상하축타이밍벨트 (Unitta 220 XL 075) 1 D-11 DPL-BA000101 Timming Pulley for Upper Shaft 상축타이밍풀리 1 D-12 DSC-CB000400 Screw 상축타이밍풀리고정나사 (1/4 n=40 L=6) 4 D-13 PBT-BD001300 Timming Belt 루퍼캠구동타이밍벨트 (Unitta 384-3GT-8) 1 D-14 DPL-BD001800 Driving Timming Pulley for Looper Cam 루퍼캠구동타이밍풀리 1 D-15 DSC-CB000400 Screw 루퍼캠구동타이밍풀리고정나사 (1/4 n=40 L=6) 2 D-16 CUS-KC000800 Upper Shaft (R) 상축 ( 후 ) 1 D-17 BR-000237-00 Ball Bearing 상축중베어링 (NTN 6204LB NR) 1 D-18 DCL-AB001300 Bearing Bushing (M) for Upper Shaft 상축중베어링붓싱 1 D-19 DSC-CB000400 Screw 상축중베어링붓싱고정나사 (1/4 n=40 L=6) 4 D-20 CUS-DB000200 Balance for Upper Shaft 상축밸런스 1 D-21 DSC-BF005400 Screw 상축밸런스고정나사 (M4 P0.7, L=7.8) 2 D-22 AS-007052-00 Upper Shaft (F) 상축 ( 전 ) 1 D-23 CLB-JD001000 Oil Wick 상축 ( 전 ) 유심 (Ø3, L=85) 1 D-24 PSC-CB000200 Screw 상축 ( 전 ) 유심마개나사 (M4 P0.7, L=4) 2 D-25 PSR-AA000200 C-ring 상축 ( 전 ) C형멈춤링 ( 호칭경15) 1 D-26 PBR-AA005000 Ball Bearing 상축전베어링 (NTN 6202LB) 2 D-27 DBS-DA008701 Housing for Upper Shaft Bearing(F) 상축전베어링하우징 1 D-28 DSC-CB001800 Screw 상축전베어링하우징고정나사 A(1/4 n=40 L=9) 1 D-29 DSC-CB001000 Screw 상축전베어링하우징고정나사 B(1/4 n=40 L=4.5) 1 D-30-1 GP-000849-01 Link Cam(Needle Bar Stroke 31mm) 링크캠 ( 바늘대스트로크 31mm) 1 D-30-2 CUS-DA001000 Link Cam(Needle Bar Stroke 33mm) 링크캠 ( 바늘대스트로크 33mm) 1 D-31 DSC-CB001900 Screw 링크캠고정나사 (5/16 n=24 L=15.5) 2 D-32 BR-000031-00 Ball Bearing 루퍼캠축후베어링 (NTN 6202ZZ NR) 1 D-33 DCL-AB001800 Bushing for Looper Cam Shaft Bearing 루퍼캠축후베어링붓싱 1 D-34 DSC-CB001800 Screw 루퍼캠축베어링붓싱고정나사 A(1/4 n=40 L=9) 1 D-35 DSC-CB000400 Screw 루퍼캠축베어링붓싱고정나사 B(1/4 n=40 L=6) 1 D-36 CUS-KC001000 Looper Cam Shaft 루퍼캠축 1 D-37 DPL-BD002400 Timming Pulley for Looper Cam Shaft 루퍼캠축타이밍풀리 1 D-38 DSC-CB001800 Screw 루퍼캠축타이밍풀리고정나사 A(1/4 n=40 L=9) 1 D-39 DSC-CB000400 Screw 루퍼캠축타이밍풀리고정나사 B(1/4 n=40 L=6) 1 D-40 PBR-AA006900 Ball Bearing 루퍼캠축전베어링 (NTN 6002LB; 2 O-ring) 1 D-41 DCL-AB001700 Bushing for Looper Cam Shaft Bearing 루퍼캠축전베어링붓싱 1 D-42 DSC-CB000400 Screw 루퍼캠축베어링붓싱고정나사 (1/4 n=40 L=6) 2 D-43 CUS-DF000200 Looper Cam [Ass y] 루퍼캠 ( 조 ) 1 Set D-43-1 GP-001391-00 Looper Cam 루퍼캠 2 D-43-2 CL-000027-00 Looper Cam Collar 루퍼캠카라 1 D-43-3 GP-001392-00 Looper Cam Spacer 루퍼캠스페이서 1 D-44 DSC-CB000700 Screw 루퍼캠 ( 조 ) 고정나사 (M5 P0.8, L=5) 2 D-45 CUS-CC000100 Connect Rod for Take Up Driver 실채기축구동레버연결로드 1 D-46 DSC-BF010600 Screw 구동레버연결로드고정나사 A (11/64 n=32, L=13) 2 D-47 DSC-BA002300 Screw 구동레버연결로드고정나사 B 2 D-48 CUS-BJ000800 Guide for Thread Take Up Driving Lever Shaft 실채기축구동레버안내 1 D-49 DSC-BJ003600 Screw 구동레버안내고정나사 (1/8 n=40, L=7.5) 2 D-50 CUS-KC001100 Driving Shaft for Thread Take Up 실채기구동축 1 D-51 CUS-CM000100 Driving Lever for Thread Take Up Shaft 실채기축구동레버 1 D-52 PSC-AC001200 Screw 실채기축구동레버고정나사 (M6 P1.0, L=14) 1 D-53 DWS-AA004600 Washer 실채기축구동레버와셔 (d=5.5, D=15, t=1.8) 1 Applied Period 19

20 D Upper Shaft Mechanism 상축관계 43-1 43-2 43-3 6 64 30-2 7 8 9 10 11 12 12 13 14 15 15 16 17 18 19 30-1 31 29 28 27 26 26 25 24 23 22 20 21 32 33 34 35 36 37 39 38 40 41 42 43 44 59 60 61 56 57 58 50 55 53 54 51 52 45 47 48 49 46 19 44 42 12 12 19 19

Ref. No. Parts No. Note Name of Parts 품 명 Q ty D-54 DCL-BB001500 Spacer for Thread Take Up Driving Lever 실채기축구동레버스페이서 1 D-55 PSC-AC011100 Screw 실채기구동축나사 (M5 P0.8, L=12) 1 D-56 CUS-BB001000 Bracket for Thread Take Up Lever 실채기브라켓 1 D-57 DWS-AA000600 Washer 실채기브라켓와셔 (D1=5.3, D2=10, t=1) 1 D-58 PSC-AC006100 Screw 실채기브라켓고정나사 (M5 P0.8, L=15) 1 D-59 CUS-HK000100 Needle Thread Take Up Lever 바늘실실채기 1 D-60 CUS-HK000200 Top Cover Thread Takp Up Lever 장식실실채기 1 D-61 SC-A170-8670 Screw 실채기고정나사 (9/64 n=40, L=7) 2 D-62 GP-001707-00 Oil Seal 실채기축전붓싱오일씰 1 D-63 DBS-DA012100 Bushing(F) for Thread Take Up Shaft 실채기축전붓싱 1 D-64 DBS-DA012001 Bushing(R) for Thread Take Up Shaft 실채기축후붓싱 1 Applied Period 21

E Needle Bar Mechanism 바늘대관계 22

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period E-1 ANB-PS000301 Needle Bar 바늘대 ( 조 ) 1 Set Apr.17.09 E-1-1 DBS-DA010600 Needle Bar Insert Bushing 바늘대삽입붓싱 1 E-2 CNB-HK001300 Needle Bar Take Up Thread 바늘대실채기 1 E-3 DSC-BJ001400 Needle Bar Take Up Thread Screw 바늘대실채기죔나사 1 E-4 CNB-BF000900 Needle Bar Holder 바늘대잡이 1 E-5 DSC-BF003100 Needle Bar Holder Screw 바늘대잡이죔나사 1 E-6 CGA-GD000200 Needle Holder 바늘잡이 1 E-7 CNB-HK001100 Top Cover Thread Eyelet 장식실아일렛 1 E-8 GP-001299-00 Needle 바늘 3 E-9 DSC-CA001400 Needle Fix Screw 바늘고정나사 4 E-10 AS-000348-00 Needle Bar Connecting Rod(Ass y) 바늘대연결롯드 ( 조 ) 1 Set E-10-1 CNB-CC000500 Needle Bar Connecting Rod 바늘대연결롯드 1 E-10-2 PBR-BA002400 Roller Bearing 바늘대크랭크롤러베어링 ( 내경8, 외경11, 폭13) 1 E-10-3 DPN-AD005900 Needle Bar Connecting Rod Pin 바늘대연결롯드핀 1 E-11 CLB-JD001100 Needle Bar Connecting Rod Pin Oil Wick 바늘대연결롯드핀유심 1 E-12 DWS-AA010000 Needle Bar Connecting Rod Washer 바늘대연결롯드와셔 1 E-13 CNB-CD000400 Needle Bar Guide Block 바늘대안내블럭 1 E-14 CNB-BK000401 Needle Bar Holder Guide 바늘대잡이안내 1 E-15 DSC-BF004300 Needle Bar Holder Guide Screw 바늘대잡이안내고정나사 2 E-16 CLB-MG000100 Needle Bar Holder Guide Sponge 바늘대잡이안내스폰지 1 E-17 CLB-BF000900 Sponge Holder 스폰지잡이 1 E-18 CMB-JB000600 Under Thread Oil Tank(Ass y) 밑실오일탱크 ( 조 ) 1 Set E-19 DSC-BJ001800 Under Thread Oil Tank Screw 밑실오일탱크죔나사 1 E-20 CMB-JL000500 Silicon Lubrication Felt 실리콘급유휄트 1 E-21 CLB-JG000300 Under Thread Oil Tank Hose 밑실오일탱크호스 Ø4 1 E-22 - Under Thread Oil Tank Oil Wick 밑실오일탱크유심 1 E-23 CLB-JP001100 Silicon Lubrication Tank Nipple 실리콘급유탱크니플 1 E-24 CMB-JB000500 Silicon Lubrication Tank 실리콘급유탱크 1 E-25 DSC-BF005400 Silicon Lubrication Tank Screw 실리콘급유탱크죔나사 2 E-26 CGA-GA000700 Needle Plate 침판 1 E-27 DSC-BC000600 Needle Plate Screw 침판죔나사 2 E-28 DBS-DA010400 Needle Bar Bushing(Upper) 바늘대상붓싱 1 E-29 DBS-DA010501 Needle Bar Bushing(Lower) 바늘대하붓싱 1 Apr.17.09 E-30 CLB-BG003400 Needle Bar Oil Wick Holder 바늘대유심잡이 1 E-31 GP-003376-00 Needle Bar Oil Wick 바늘대유심 1 E-32 CMB-LB005400 Under Thread Oil Tank Cap 밑실실리콘급유탱크캡 1 E-33 44-012P-1230 Pin 밑실실리콘급유탱크캡핀 2 E-34 PSC-AC011200 Screw 바늘대연결롯드핀고정나사 1 E-35 CLB-BH001200 Hose Holder 밑실오일탱크호스잡이 2 E-36 DWS-AA010800 Washer 실린콘급유탱크와셔 2 23

24 F Presser Foot Mechanism 누름대관계 49-9 49-8 49-1 49-11 49-4 49-9 49-10 49-6 49-3 49-7 49-5 49-2 49-12 50-12 50-2 50-5 50-7 50-3 50-6 50-10 50-9 50-4 50-11 50-1 50-8 50-9 1 1-1 1-2 2 3 7 6 18 18 17 5 4 9 11 10 12 13 14 30 29 28 32 33 34 35 37 36 21 44 22 45 23 20 19 38-1 38 40 41 26 27 15 16 15-2 15-5 15-7 15-3 15-6 15-10 15-9 15-4 15-11 15-1 15-8 31 15-9 48 47

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period F-1 AS-000274-00 Pressure Regulating Screw [Ass y] 누름대압력조절나사 ( 조 ) 1 Set F-1-1 DSC-HA000300 Pressure Regulating Screw 누름대압력조절나사 1 F-1-2 CPB-KC000400 Guide for Pressure Regulating Screw Spring 누름대압력조절나사스프링가이드 1 F-2 DSN-CC000300 Nut for Pressure Regulating Screw 누름대압력조절나사너트 1 F-3 DSP-AA003500 Presser Bar Spring (L) 누름대스프링 ( 대 ) 1 F-4 CPB-BF000600 Holder for Presser Bar 누름대잡이 1 F-5 DSC-BF003600 Screw 누름대잡이고정나사 (11/64 n=40 L=8) 1 F-6 CPB-BK000200 Guide Block for Presser Bar Holder 누름대잡이안내블럭 1 F-7 DSC-BF001200 Screw 누름대잡이안내블록고정나사 (11/64 n=40 L=16) 2 F-8 DSP-AA003600 Presser Bar Spring (S) 누름대스프링 ( 소 ) 1 F-9 CPB-KB000500 Presser Bar 누름대 1 F-10 CPB-BJ000400 Finger Guard 핑거가아드 1 F-11 DSC-BF006700 Screw 핑거가아드고정나사 (M3 P0.5, L=5) 1 F-12 RI-000011-00 Oil Protector Ring for Presser Bar 누름대오일막이링 1 F-13 DCL-AA003500 Collar For Presser Bar 누름대카라 1 F-14 PSC-CB000200 Screw 누름대카라고정나사 (M4 P0.7, L=4) 2 F-15 AGA-PS001301 Presser Foot (Ass y) 노루발 ( 조 ) 1 Set F-15-1 CGA-GC001100 Presser Foot(Lower) 노루발 ( 하 ) 1 Feb.23.09 F-15-2 CGA-GC001000 Presser Foot(Upper) 노루발 ( 상 ) 1 F-15-3 CGA-GC001200 Sub-Presser Foot 보조노루발 2 F-15-4 CGA-BJ000400 Guide(L) for Sub-Presser Foot 보조노루발가이드 ( 좌 ) 1 F-15-5 CGA-BJ000500 Guide(R) for Sub-Presser Foot 보조노루발가이드 ( 우 ) 1 F-15-6 DSP-AC004200 Presser Foot Spring (L) 노루발스프링 ( 좌 ) 1 F-15-7 DSP-AC004100 Presser Foot Spring (R) 노루발스프링 ( 우 ) 1 F-15-8 DSP-AA004300 Presser Foot Spring (Lower) 노루발스프링 ( 하 ) 1 F-15-9 DSC-BB003300 Screw 보조노루발가이드나사 (3/32 n=56 L=5.5) 2 F-15-10 DPN-AA007200 Pin 노루발결합힌지핀 (Ø1.6, L=11) 1 F-15-11 PPN-AF001900 Spring Pin 노루발스프링핀 ( 호칭경1.6, L=20) 1 F-16 DSC-BJ001400 Screw 노루발 ( 조 ) 고정나사 (9/64 n=40 L=6) 1 F-17 CPM-CA000700 Link for Presser Bar 누름대링크 1 F-18 DSC-FA011100 Hinge Screw for Presser Bar Link 누름대링크고정단나사 2 F-19 CPM-CB000700 Lifter Link Lever for Presser Bar 누름대올림링크레버 1 F-20 PPN-AF001600 Spring Pin 무릎올림축스프링핀 ( 호칭경4, L=16) 1 F-21 CPM-KC000600 Knee-Lifting Shaft 무릎올림축 1 F-22 CPM-CB000600 Knee-Lifting Connecting Crank 무릎올림연결크랭크 1 F-23 PSC-AC006100 Screw 무릎올림축연결크랭크고정나사 (M5 P0.8, L=15) 1 F-24 DCL-AA004400 Collar for Knee-Lift Shaft 무릎올림축카라 1 F-25 DSC-CB000300 Screw 무릎올림축카라고정나사 (11/64 n=40 L=5) 2 F-26 DSP-AC003900 Spring for Knee-Lifting Connecting Crank 무릎올림연결크랭크스프링 1 F-27 CPM-BH000400 Knee-Lifting Link 무릎올림링크 1 F-28 GP-001336-01 Knee-Lifting Lever(Non-auto. Trimmer) 무릎올림레버 ( 비사절용 ) 1 F-29 DWS-AA010500 Washer for Knee-Lifting Lever 무릎올림레버와셔 1 F-30 PSC-AC004600 Screw 무릎올림레버나사 (M6 P1.0, L=10) 1 F-31 DSP-AC004000 Spring for Knee-Lifting Lever 무릎올림레버스프링 1 F-32 DSC-FG000500 Knee-Lifting Hinge 무릎올림힌지 1 F-33 DPN-BA000500 Stopper Pin for Knee-Lifting Lever Spring 무릎올림레버스프링스토퍼핀 1 F-34 CPM-BJ000900 Stopper for Knee-Lifter 무릎올림스토퍼 1 F-35 PSC-AC004600 Screw 무릎올림스토퍼고정나사 (M6 P1.0, L=10) 2 F-36 DSN-AA001400 Nut 무릎올림스토퍼너트 (M5 P0.8, H=4) 1 F-37 PSC-AC003000 Screw 무릎올림스토퍼나사 (M5 P0.8, L=25(S=25)) 1 F-38 AS-000295-00 Tension Release Lever(Ass y)(non-auto. Trimmer) 실늦추기레버 ( 조 )( 비사절용 ) 1 F-38-1 GP-001711-00 Tension Release Lever(Non-auto. Trimmer) 실늦추기레버 ( 비사절 ) 1 F-38-2 PN-000066-00 Tension Release Lever(Non-auto. Trimmer) Pin 실늦추기레버 ( 비사절 ) 핀 1 F-39 PSC-AC006200 Screw 실늦추기레버 ( 조 ) ( 비사절 ) 고정나사 (M4 P0.7, L=15) 1 F-40 GP-001710-00 Tension Release Shaft(Non-auto. Trimmer) 실늦추기축 ( 비사절 ) 1 F-41 GP-001712-00 Tension Release Spring(Non-auto. Trimmer) 실늦추기스프링 ( 비사절 ) 1 F-42 DBS-DB002601 Bushing for Presser Bar 누름대붓싱 1 25

26 F Presser Foot Mechanism 누름대관계 49-9 49-8 49-1 49-11 49-4 49-9 49-10 49-6 49-3 49-7 49-5 49-2 49-12 50-12 50-2 50-5 50-7 50-3 50-6 50-10 50-9 50-4 50-11 50-1 50-8 50-9 1 1-1 1-2 2 3 7 6 18 18 17 5 4 9 11 10 12 13 14 30 29 28 32 33 34 35 37 36 21 44 22 45 23 20 19 38-1 38 40 41 26 27 15 16 15-2 15-5 15-7 15-3 15-6 15-10 15-9 15-4 15-11 15-1 15-8 31 15-9 48 47

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period F-43 GP-001707-00 Oil Seal for Presser Bar Bushing 누름대붓싱오일씰 1 F-44 DBS-DA011101 Bushing(F) for Presser Lifting Shaft 무릎올림축전붓싱 1 F-45 DBS-DA011201 Bushing(R) for Presser Lifting Shaft 무릎올림축후붓싱 1 F-47 DPK-CC000400 Rubber Cap 무릎올림축전붓싱고무마개 1 F-48 CST-FB000300 Washer 무릎올림축전붓싱고무와셔 1 F-49 AS-014991-00 Option Presser Foot (Ass y) Roller Type 노루발 ( 조 ) 롤러타입 1 Set Feb.05.09 F-49-1 GP-039109-00 Option Presser Foot(Lower) 노루발 ( 하 ) 1 Feb.05.09 F-49-2 CGA-GC001000 Option Presser Foot(Upper) 노루발 ( 상 ) 1 F-49-3 AS-008917-00 Option Sub-Presser Foot Roller Type 보조노루발 2 Feb.05.09 F-49-4 CGA-BJ000400 Option Guide(L) for Sub-Presser Foot 보조노루발가이드 ( 좌 ) 1 F-49-5 CGA-BJ000500 Option Guide(R) for Sub-Presser Foot 보조노루발가이드 ( 우 ) 1 F-49-6 DSP-AC004200 Option Presser Foot Spring (L) 노루발스프링 ( 좌 ) 1 F-49-7 DSP-AC004100 Option Presser Foot Spring (R) 노루발스프링 ( 우 ) 1 F-49-8 DSP-AA004300 Option Presser Foot Spring (Lower) 노루발스프링 ( 하 ) 1 F-49-9 DSC-BB003300 Option Screw 노루발가이드나사 (3/32 n=56 L=5.5) 2 F-49-10 DPN-AA007200 Option Pin 노루발결합힌지핀 (Ø1.6 L=11 1 F-49-11 PPN-AF001900 Option Spring Pin 노루발스프링핀 ( 호칭경 1.6 L=20) 1 F-49-12 DSC-BJ001400 Option Screw 노루발 ( 조 ) 고정나사 (9/64 n=40 L=6) 1 F-50 AS-014992-00 Option Presser Foot (Ass y) Bearing Type 노루발 ( 조 ) 베어링타입 1 Set Feb.05.09 F-50-1 GP-039109-00 Option Presser Foot(Lower) 노루발 ( 하 ) 1 Feb.05.09 F-50-2 CGA-GC001000 Option Presser Foot(Upper) 노루발 ( 상 ) 1 F-50-3 AS-008915-00 Option Sub-Presser Foot Bearing Type 보조노루발 2 Feb.05.09 F-50-4 CGA-BJ000400 Option Guide(L) for Sub-Presser Foot 보조노루발가이드 ( 좌 ) 1 F-50-5 CGA-BJ000500 Option Guide(R) for Sub-Presser Foot 보조노루발가이드 ( 우 ) 1 F-50-6 DSP-AC004200 Option Presser Foot Spring (L) 노루발스프링 ( 좌 ) 1 F-50-7 DSP-AC004100 Option Presser Foot Spring (R) 노루발스프링 ( 우 ) 1 F-50-8 DSP-AA004300 Option Presser Foot Spring (Lower) 노루발스프링 ( 하 ) 1 F-50-9 DSC-BB003300 Option Screw 노루발가이드나사 (3/32 n=56 L=5.5) 2 F-50-10 DPN-AA007200 Option Pin 노루발결합힌지핀 (Ø1.6 L=11 1 F-50-11 PPN-AF001900 Option Spring Pin 노루발스프링핀 ( 호칭경 1.6 L=20) 1 F-50-12 DSC-BJ001400 Option Screw 노루발 ( 조 ) 고정나사 (9/64 n=40 L=6) 1 27

G Spreader Mechanism 스프레더관계 1 5 17 2 4 7 3 16 20 6 15 14 13 18 8 12-3 19 10 12-2 12 12-1 9 11 21 22 23 25 24 27 26 29 28 28

Ref. No. Parts No. Note Name of Parts 품 명 Q ty G-1 CSE-KC000100 Spreader Driving Shaft 스프레더구동축 1 G-2 DBS-DA010100 Bushing(F) for Spreader Driving Shaft 스프레더구동축전부싱 1 G-3 DBS-DA010200 Bushing(R) for Spreader Drivng Shaft 스프레더구동축후부싱 1 G-4 DCL-AA004000 Collar for Spreader Driving Shaft 스프레더구동축카라 1 G-5 DSC-CB000300 Screw 스프레더구동축카라고정나사 (11/64 n=40, L=5) 2 G-6 CSE-CM000100 Spreader Adjusting Lever 스프레더구동조절레버 1 G-7 PSC-AC001200 Screw 스프레더구동조절레버고정나사 (M6 P1.0, L=14) 1 G-8 DSC-FG000700 Pin for Adjusting Lever 스프레더구동조절레버핀 1 G-9 DSC-BF005400 Screw 스프레더구동조절레버핀나사 (M4 P0.7, L=8) 1 G-10 WS-000026-00 Washer for Connecting Rod 스프레더구동커넥팅로드와셔 1 G-11 PSR-AA001100 Retaining Ring 스프레더구동편심캠멈춤링 ( 호칭 22 C형 ) 1 G-12 AS-000665-00 Spreader Driver Eccentric(Ass y) 스프레더구동편심캠 ( 조 ) 1 Set G-12-1 CSE-CC000100 Connecting Rod for Spreader Driving Shaft 스프레더구동커넥팅로드 1 G-12-2 PBR-BA002300 Bearing 스프레더구동편심캠베어링 (KT222613) 1 G-12-3 CSE-DC000100 Spreader Driving Eccentric 스프레더구동편심캠 1 G-13 SC-A308-5607 Screw 스프레더구동편심캠고정나사 (1/4 n=40, L=6) 2 G-14 DWS-AA009600 Washer for Adjusting Lever 스프레더구동조절레버와셔 1 G-15 PSN-AA000900 Nut 스프레더구동조절레버고정너트 ( M6 1.0) 1 G-16 CSE-CB000100 Rocking Arm for Spreader Driving Shaft 스프레더구동축요동암 1 G-17 PSC-AC001200 Screw 스프레더구동축요동암고정나사 (M6 P1.0, L=14) 1 G-18 CSE-CU000100 Rocking for Spreader Shaft 스프레더축요동핀 1 G-19 CSE-KG000100 Spreader Shaft 스프레더축 1 G-20 CLB-JL005100 Felt for Spreader Shaft 스프레더축펠트 1 G-21 DBS-DB002900 Bushing for Spreader Shaft 스프레더축부싱 1 G-22 GP-001554-00 Oil Seal for Spreader Shaft 스프레더축오일씰 1 G-23 DWS-AA009700 Washer for Spreader Shaft 스프레더축와셔 1 G-24 DCL-AA004100 Collar for Spreader Shaft 스프레더축카라 1 G-25 PSC-CB000200 Screw 스프레더축카라고정나사 (M4 P0.7, L=4) 2 G-26 CSE-BF000100 Spreader Holder 스프레더잡이 1 G-27 PSC-AC004900 Screw 스프레더잡이고정나사 (M4 P0.7, L=12) 1 G-28 CGA-HF000100 Spreader 스프레더 1 G-29 PSC-AC004900 Screw 스프레더고정나사 (M4 P0.7, L=12) 1 Assembly No. 29

30 H Looper Driving Mechanism 루퍼구동관계 A 27 1 5 3 4 9 6 7 8 11 23 13 24 25 12 22 14 15 16 20 17 18 19 21 29 25 26 27-3 27-2 27-1 28 26-2 26-1 45 30 30-2 30-1 30-2 31 32 33 34 33-1 33-2 41 42 31 32 31 43 39 40 35 36 37 38 2 44 46

Ref. No. Parts No. Note Name of Parts 품 명 Q ty H-1 CGA-HD000300 Looper 루퍼 1 H-2 DSC-BF010400 Screw 루퍼고정나사 (9/64 n=40, L=6) 1 H-3 CLP-BF000200 Looper Holder 루퍼잡이 1 H-4 DWS-AA010900 Spacer for Looper Holder 루퍼잡이스페이서 1 H-5 DSC-BF010300 Screw 루퍼잡이고정나사 (9/64 n=40, L=9) 1 H-6 DBS-DA010900 Bushing for Looper Shaft 루퍼축부싱 1 H-7 CLB-JP000800 Nipple for Looper Shaft Bushing 루퍼축부싱니플 1 H-8 PSC-CB001500 Screw 루퍼축부싱고정나사 (M6 P1.0, L=8) 1 H-9 CMB-HK004800 Eyelet for Looper Shaft Bushing 루퍼축부싱아일렛 1 H-10 DSC-BF005700 Screw 루퍼축부싱아일렛고정나사 (M3 P0.5, L=3.5) 1 H-11 DWS-AA009300 Washer for Looper Shaft Bushing 루퍼축부싱와셔 1 H-12 CLP-BA000400 Looper Moving Base 루퍼운동베이스 1 H-13 CLP-CD000100 Slide Block for Looper Moving Base 루퍼운동슬라이드블록 1 H-14 DSC-CB001200 Screw 루퍼운동슬라이드블록고정나사 (M4 P0.7, L=6) 1 H-15 CLP-BF000300 Slide Block Holder 루퍼운동슬라이드블록잡이 1 H-16 DWS-AA010900 Slide Block Spacer 루퍼운동슬라이드블록잡이스페이서 1 H-17 DWS-AB000900 Thrust Washer for Looper Shaft 루퍼축스러스트와셔 1 H-18 DPK-CY000500 Seal Plug for Looper Shaft 루퍼축마개 1 H-19 CLP-KD000100 Looper Shaft 루퍼축 1 H-20 DSC-BJ000300 Screw 루퍼축고정나사 (9/64 n=40, L=10) 1 H-21 GP-001381-00 Bushing for Looper Shaft Guide 루퍼축가이드부싱 1 H-22 CLP-KF000300 Looper Shaft Guide 루퍼축가이드 1 H-23 PSC-CB001500 Screw 루퍼축가이드고정나사 (M6 P1.0, L=8) 1 H-24 DSC-BF010500 Screw for Looper Moving Base 루퍼운동베이스나사 1 H-25 DWS-AA009400 Washer for Looper Moving Base 루퍼운동베이스와셔 2 H-26 ALP-PS000300 Looper Rocker Adjusting Pin(Ass y) 루퍼요동조절핀 ( 조 ) 1 Set H-26-1 DPN-AD006100 Looper Rocker Adjusting Pin 루퍼요동조절핀 1 H-26-2 PPN-AF001500 Spring Pin 루퍼요동조절핀스프링핀 ( 호칭경 1.6, L=4) 1 H-27 AS-000666-00 Looper Rocker Regulating Eccentric(Ass y) 루퍼요동편심캠 ( 조 ) 1 Set H-27-1 CLP-DC000100 Looper Rocker Regulating Eccentric 루퍼요동편심캠 1 H-27-2 PBR-BA002200 Bearing 루퍼요동편심캠베어링 (KT263013) 1 H-27-3 CLP-CC000100 Looper Rocker Connecting Rod 루퍼요동커넥팅로드 1 H-28 SC-A308-5607 Screw 루퍼요동편심캠고정나사 (1/4 n=40, L=6) 1 H-29 DSN-AA001400 Nut 루퍼운동베이스너트 (M5 P0.8) 1 H-30 AS-000276-00 Looper Driving Shaft(Ass y) 루퍼구동축 ( 조 ) 1 Set H-30-1 CLP-KC000400 Looper Driving Shaft 루퍼구동축 1 H-30-2 DPK-CY000300 Seal Plug for Looper Driving Shaft 루퍼구동축마개 2 H-31 PWS-AA002500 Thrust Washer 루퍼구동축스러스트와셔 (GS1226) 3 H-32 PBR-BB000300 Thrust Bearing 루퍼구동축스러스트베어링 (AXK1226) 2 H-33 AS-000278-00 Looper Rocking Lever(Ass y) 루퍼왕복구동레버 ( 조 ) 1 Set H-33-1 CLP-CM001000 Looper Rocking Lever 루퍼왕복구동레버 1 H-33-2 DPK-CY000400 Seal Plug for Looper Rocking Lever 루퍼왕복구동레버마개 1 H-34 DSC-CB002200 Screw 루퍼왕복구동레버고정나사 (M8 P1.25, L=8) 2 H-35 CLP-CC000200 Looper Connecting Rod 루퍼왕복구동커넥팅로드 1 H-36 DSC-BF010600 Screw 루퍼왕복구동커넥팅로드고정나사 (11/64 n=32, L=14) 4 H-37 CLP-BJ001300 Guide for Looper Connecting Rod 루퍼왕복구동커넥팅로드가이드 1 H-38 DSC-BJ000200 Screw 루퍼왕복구동커넥팅로드가이드고정나사 (11/64 n=40, L=6.5) 2 H-39 CLB-BJ000700 Oil Splasher 오일분사판 1 H-40 DWS-AA009500 Washer 오일분사판와셔 (d=4.8, D=8.4, t=0.8) 2 H-41 CLP-CM000900 Looper Driving Arm 루퍼왕복구동암 1 H-42 PSC-AC001200 Screw 루퍼왕복구동암고정나사 (M6 P1.0, L=14) 1 H-43 DBS-DA009900 Bushing(F) for Looper Driving Shaft 루퍼구동축전붓싱 1 H-44 GP-001630-00 Oil Seal 루퍼구동축전붓싱오일씰 1 H-45 DBS-DA010000 Bushing(R) for Looper Driving Shaft 루퍼구동축후붓싱 1 H-46 DPK-CB001601 Oil Seal 루퍼구동축후붓싱오일씰 1 Assembly No. 31

I Feed Driving Control Mechanism 피드조절관계 7 6 5 3 1-2 1 2 1-1 1-3 1-2 3 8 1-4 9 19 22 21 17-2 8 11 10 10 30 16 31 18 12 32 15 33 49 14 13 32

Ref. No. Parts No. Note Name of Parts 품 명 Q ty I-1 AS-000667-00 Differential Feed Eccential Cam (Ass y) 차동이송편심캠 ( 조 ) 1 Set I-1-1 CFA-DC000500 Eccential Cam For Differential Feed 차동이송편심캠 1 I-1-2 PBR-BA001000 Bearing 차동이송편심캠베어링 (FWF-252910) 2 I-1-3 CFA-CC000400 Connecting Rod for Feed Lift 들대연결로드 1 I-1-4 CFA-CC000500 Connecting Rod for Differential Feed 차동이송연결로드 1 I-2 DSC-CB000700 Screw 차동이송편심캠고정나사 2 I-3 PSR-AA001000 C ring 차동이송편심캠 C링 ( 호칭경 25) 2 I-4 DSC-CB001500 Screw 들대연결로드고정나사 (M4 0.7 L=5) 1 I-5 DPN-AA005900 Pin for Differential Feed Connecting Rod 들대연결로드핀 1 I-6 CFA-CB000500 Lever for Feed Lift 들대레버 1 I-7 SC-A308-5607 Screw 들대레버고정나사 (1/4 n=40) 2 I-8 DPN-AA005800 Pin for Differential Feed Connecting Rod 차동이송연결로드핀 2 I-9 CFA-CA000400 Lever Link(L) for Differential Feed 차동이송레버링크 ( 대 ) 1 I-10 DSC-CB001500 Screw 차동이송연결로드핀고정나사 (M4 0.7 L=5) 2 I-11 CFA-CA000500 Lever Link(S) for Differential Feed 차동이송레버링크 ( 소 ) 1 I-12 DPN-AA006000 Pin for Differential Feed Shaft Lever 차동이송축레버핀 1 I-13 DWS-AA009200 Washer for Differential Feed Shaft Lever 차동이송축레버와셔 1 I-14 DSC-BF005400 Screw 차동이송축레버핀고정나사 (M4 0.7 L=8) 1 I-15 CFA-CM000500 Lever for Differential Feed Shaft 차동이송축레버 1 I-16 PSC-AC010600 Screw 차동이송축레버고정나사 (M4 0.7 L=12) 1 I-17 AS-000284-00 Control Bracket for Differential Feed (Ass y) 차동이송조절브라켓 ( 조 ) 1 Set I-17-1 CFA-BB000300 Control Bracket for Differential Feed 차동이송조절브라켓 1 I-17-2 DPN-BA000500 Control Bracket Pin for Differential Feed 차동이송조절브라켓핀 1 I-18 DPN-AA006100 Pin for Control Link 조절링크핀 1 I-19 SC-A308-5607 Screw 차동이송조절브라켓고정나사A(1/4 n=40) 2 I-20 DSC-CB001500 Screw 차동이송조절브라켓고정나사B(M4 0.7 L=5) 1 I-21 CFA-KC000300 Guide for Differential Feed Connecting Rod 차동이송연결로드가이드 1 I-22 DSP-AB002800 Spring for Differential Feed Control Bracket 차동이송조절브라켓스프링 1 I-23 DPN-BA000500 Pin 차동이송연결브라켓스프링핀 1 I-24 CFA-CA000600 Control Link for Differential Feed 차동이송조절링크 1 I-25 AS-000280-00 Control Nut for Differential Feed(Ass y) 차동이송조절너트 ( 조 ) 1 Set I-25-1 DSN-CZ000500 Control Nut for Differential Feed 차동이송조절너트 1 I-25-2 PPN-AF001800 Spring Pin 차동이송조절너트스프링핀 ( 호칭경2, L=5) 1 I-26 DSC-HZ000700 Control Screw for Differential Feed 차동이송조절나사 1 I-27 DPN-AA006200 Stopper Pin for Differential Feed Control 차동이송조절스토퍼핀 1 I-28 CFA-CQ000200 Control Knob for Differential Feed 차동이송조절손잡이 1 I-29 PSC-CB000200 Screw 차동이송조절스토퍼핀고정나사 (M4 0.7 L=4) 1 I-30 DBS-DB003400 Bushing Differential Feed Control Lever Shaft 차동이송조절레버축붓싱 1 I-31 RI-000014-00 O Ring (P16) 차동이송조절레버축붓싱 O링 1 I-32 PPK-BA001300 Oil Seal 차동이송조절레버축붓싱오일씰 1 I-33 CFA-KC000200 Shaft for Differential Feed Control Lever 차동이송조절레버축 1 I-34 CFA-CM000400 Control Lever for Differential Feed 차동이송조절레버 1 I-35 DSC-BF005400 Screw 차동이송조절레버죔나사 (M4 0.7 L=8) 1 I-36 DWS-CB000500 Disc Spring Washer for Control Lever 조절레버접시스프링와셔 1 I-37 DSN-CZ000300 Nut for Control Lever 조절레버고정너트 1 I-38 DSC-BF005100 Screw for Control Lever 조절레버고정나사 1 I-39 DSN-CF000200 Stopper for Control Lever 조절레버스토퍼 1 I-40 PWS-AA000900 Washer 조절레버스토퍼와셔 1 I-41 PWS-CA000800 Spring Washer 조절레버스토퍼스프링와셔 1 I-42 PSC-AC003300 Screw 조절레버스토퍼고정나사 (M5 0.8 L=8) 1 I-43 DCL-BB001601 Spacer for Graduations 눈금판스페이서 2 I-44 DSC-BB003201 Screw for Graduations 눈금판고정나사 2 I-45 CFA-BJ000400 Differential Feed Graduations 차동이송눈금판 1 I-46 DBS-DA009300 Bushing for Differential Feed Control 차동이송조절붓싱 1 I-47 PPK-BA001000 O Ring (P12) 차동이송조절손잡이 O링 1 I-48 DSC-BB001100 Screw 차동이송조절손잡이고정나사 (M4 0.7 L=4) 1 I-49 SC-A308-5607 Screw 차동이송조절레버축붓싱고정나사 (1/4 n=40, L=4.5) 1 Assembly No. 33

34 J Feed Driving Mechanism 피드구동관계 42 43 41 39 40 38 36 37 34 32 33 2 3 6 7 8 16 1 1-2 4 5 13-1 14 15 13-2 10 9 11 12-5 12-6 12-4 12-2 12-3 12-1 12-7 12-9 12-10 12-11 12-12 12-14 12-13 12-8 29 28 26 24 25 22 30 31 20 20 21 21 19 17 12 23 27 18 47 46 44 45 1-1 13 49

Ref. No. Parts No. Note Name of Parts 품 명 Q ty J-1 AS-000296-00 Main Feed Bar (Ass y) 주톱니받침 ( 조 ) 1 set J-1-1 CLF-CR000400 Main Feed Bar 주톱니받침 1 J-1-2 CLF-CD000700 Feed Dog Guide 톱니가이드 1 J-2 CGA-GB000600 Main Feed Dog 주톱니 1 J-3 SC-A156-2302 Screw 주톱니죔나사 (9/64 n=40) 1 J-4 CLF-KZ000300 Feed Bar Guide ( R ) 톱니받침가이드 ( 우 ) 1 J-5 PSC-CB000700 Screw 톱니받침가이드 ( 우 ) 고정나사 (M6 1, L=6) 1 J-6 CLF-KZ000201 Feed Bar Guide ( L ) 톱니받침가이드 ( 좌 ) 1 J-7 PSC-CB000700 Screw 톱니받침가이드 ( 좌 ) 고정나사 (M6 1, L=6) 1 J-8 CLF-CD000500 Feed Lift Block(Rear) 들대블럭 ( 후 ) 1 J-9 CLF-CA000400 Main Feed Bar Connect Link 주톱니받침연결링크 1 J-10 DPN-AA006400 Main Feed Bar Connect Link Pin 주톱니받침연결링크핀 1 J-11 DSC-BF009900 Screw 연결핀고정나사 (M5 0.8, L=18) 1 J-12 AS-000287-01 Feed Cam (Ass y) 하피이드캠 ( 조 ) 1 Set J-12-1 CLF-DC000300 Main Feed Eccentric 주이송편심기 1 J-12-2 PSC-AC005900 Screw 편심기죔나사 (M3 0.5, L=8) 1 J-12-3 DSC-CB001200 Screw 편심기고정나사 (M4 0.7, L=6) 2 J-12-4 DSC-BF010000 Screw 주이송편심기고정나사 (M2 0.4, L=3.5) 1 J-12-5 CLF-CD000800 Eccentric Slider 편심기슬라이더 1 J-12-6 DPN-BB001600 Eccentric Slider Guide Pin 편심기슬라이더가이드핀 1 J-12-7 CLF-DG000100 Feed Cam 하피이드캠 1 J-12-8 DPN-BB001700 Feed Cam Stopper Pin 피이드캠스토퍼핀 1 J-12-9 CLF-BJ000100 Feed Cam Spring Plate 피이드캠스프링판 1 J-12-10 CLF-BJ000200 Feed Cam Spring Presser Plate 피이드캠스프링압력판 1 J-12-11 DSC-BB002700 Screw 피이드캠스프링압력판나사 (M2 0.4) 2 J-12-12 CLF-BJ000300 Feed Cam Regulate Plate 피이드캠조정판 1 J-12-13 DSC-BF010100 Screw 피이드캠조정판죔나사 (9/64 n=40) 1 J-12-14 PPN-AF001300 Spring Pin 피이드캠스프링압력판핀 ( 호칭경1.5, L=4) 1 J-13 AS-000297-00 Differential Feed Bar (Ass y) 차동이송톱니받침 ( 조 ) 1 Set J-13-1 CLF-CR000500 Differential Feed Bar 차동이송톱니받침 1 J-13-2 CLF-CD000700 Feed Dog Guide 톱니가이드 1 J-14 CGA-GB000701 Differential Feed Dog 차동이송톱니 1 J-15 SC-A156-2302 Screw 차동이송톱니죔나사 (9/64 n=40) 1 J-16 CLF-CD000600 Feed Lift Block (F) 들대블럭 ( 전 ) 1 J-17 CLF-KG000100 Feed Lift Shaft 들대 1 J-18 GP-001580-00 Oil Wick 들대유심 (Ø4 L=250) 1 J-19 DPK-CY000601 Feed Lift Shaft Cap 들대캡 1 J-20 DCL-AA003900 Feed Lift Shaft Collar 들대카라 2 J-21 DSC-CB001000 Screw 들대카라고정나사 (1/4 n=40, L=4.5) 2 J-22 CLF-KZ000100 Differential Feed Shaft 차동이송축 1 J-23 DPK-CY000701 Differential Feed Shaft Cap 차동이송축캡 1 J-24 DPN-AA006300 Differential Feed Connection Pin 차동이송연결핀 1 J-25 CLB-JL005000 Oil Wick 차동이송연결핀휄트 1 J-26 CLF-CA000501 Differential Feed Bar Connect Link 차동톱니받침연결링크 1 J-27 DSC-CB002000 Oil Wick 차동이송연결핀고정나사 (M3 0.5, L=6) 1 J-28 CLF-CH000200 Oscillation Adjusting Nut 진동조절편심너트 1 J-29 DSC-BF009900 Oil Wick 연결핀고정나사 (M5 0.8, L=18) 1 J-30 CLF-BK000100 Feed Bar Guide(Lower) 톱니받침가이드 ( 하 ) 1 J-31 DSC-BF005400 Screw 톱니받침가이드 ( 하 ) 죔나사 (M4 0.7, L=11.8) 2 J-32 CLF-DC000400 Needle Guard Eccentric Cam 바늘안내편심캠 1 J-33 DSC-CB000400 Screw 바늘안내편심캠고정나사 (1/4 n=40, L=6) 2 J-34 CLF-CM000100 Needle Guard Lever (F) 바늘안내레버 ( 전 ) 1 J-35 DSC-BF010200 Screw 바늘안내레버 ( 전 ) 죔나사 (M3 P0.5, L=12.5) 1 J-36 CLF-BF000100 Needle Guard Holder (F) 바늘안내잡이 ( 전 ) 1 J-37 PSC-AC010700 Screw 바늘안내잡이 ( 전 ) 죔나사 (M3 0.5, L=6) 1 J-38 CGA-HG000300 Needle Guard (F) 바늘안내 ( 전 ) 1 J-39 CLF-CM000200 Needle Guard Lever (R) 바늘안내레버 ( 후 ) 1 Assembly No. 35

36 J Feed Driving Mechanism 피드구동관계 42 43 41 39 40 38 36 37 34 32 33 2 3 6 7 8 16 1 1-2 4 49 5 13-1 14 15 13-2 10 9 11 12-5 12-6 12-4 12-2 12-3 12-1 12-7 12-9 12-10 12-11 12-12 12-14 12-13 12-8 29 28 26 24 25 22 30 31 20 20 21 21 19 17 12 23 27 18 47 46 44 45 1-1 13

Ref. No. Parts No. Note Name of Parts 품 명 Q ty J-40 DSC-BF010200 Screw 바늘안내레버 ( 후 ) 죔나사 (M3 P0.5, L=12.5) 1 J-41 CLF-BF000201 Needle Guard Holder (R) 바늘안내잡이 ( 후 ) 1 J-42 CGA-HG000400 Needle Guard (Rear) 바늘안내 ( 후 ) 1 J-43 PSC-AC010700 Screw 바늘안내 ( 후 ) 죔나사 (M3 0.5, L=6) 1 J-44 DBS-DA009600 Feed Lift Shaft Bushing(F) 들대전붓싱 1 J-45 DBS-DA009700 Feed Lift Shaft Bushing(Rear) 들대후붓싱 1 J-46 DBS-DA009500 Differential Feed Shaft Bushing(Rear) 차동이송축후붓싱 1 J-47 DBS-DA009400 Differential Feed Shaft Bushing(F) 차동이송축전붓싱 1 J-48 CLB-JL004300 Felt 들대휄트 1 J-49 CLB-BJ000900 Cover for Needle Guard Lever 바늘안내레버유방판 1 Assembly No. 37

K Lubrication Mechanism 급유관계 38

Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period K-1 ALB-PS001200 Oil Pump Ass y 오일펌프 ( 조 ) 1 Set K-2 PSC-AC003200 Oil Pump Bracket Screw 오일펌프브라켓죔나사 2 K-3 DGR-AH000201 Oil Pump Driving Worm Gear 오일펌프구동웜기어 1 Apr.19.09 K-4 PSC-CB000200 Oil Pump Worm Gear Screw 오일펌프웜기어고정나사 2 K-5 CLB-JP000100 Oil Pump Nipple 오일펌프니플 2 K-6 CLB-JP000900 Oil Hose Joint A 오일호스조인트A 2 K-7 CLB-JP000200 Oil Hose Joint B 오일호스조인트B 3 K-8 DSC-BF011700 Tube Connecting Screw 호스연결나사 4 K-10 DSC-BF005400 Oil Lubricant Pipe Screw 오일급유파이프죔나사 1 K-11 CLB-JP001001 Lower Shaft Lubricant Nipple 하축급유니플 1 K-12 ALB-PS000900 Oil Suction Pipe Lower(Ass y) 오일환류파이프하 ( 조 ) 1 Set K-12-1 CLB-JF001000 Oil Suction Pipe Lower 오일환류파이프하 1 K-12-2 CLB-BG003200 Oil Pipe Holder 오일파이프잡이 1 K-13 DSC-BA000300 Oil Suction Pipe Lower Screw 오일환류파이프하죔나사 1 K-14 CLB-JF000900 Oil Suction Pipe Upper 오일환류파이프상 1 K-15 DPK-CA002100 Oil Pipe Holder Rubber 오일파이프잡이고무 1 K-16 CLB-JL005200 Arm Suction Pipe Felt 암환류파이프휄트 1 K-17 CLB-JA000100 Oil Receiver Bracket 오일받이브라켓 1 K-18 DSC-FG000601 Upper Shaft Oil Pipe 상축오일파이프 1 Apr.17.09 K-19 PSN-AA000600 Upper Shaft Oil Pipe Nut 상축오일파이프너트 1 K-20 RI-000008-00 Upper Shaft Oil Pipe O Ring 상축오일파이프 O링 1 K-21 DBS-DA012801 Upper Shaft Oil Bushing 상축오일붓싱 1 Apr.17.09 K-22 DSC-BF005400 Oil Receiver Bracket Screw 오일받이브라켓고정나사 2 K-23 CLB-JM000300 Oil Filter 오일필터 1 K-24 DSC-HB001900 Oil Filter Bushing 오일필터붓싱 1 K-25 PPK-BA001400 Oil Filter O Ring 오일필터 O 링 (P41) 1 K-26 CLB-LA000300 Oil Filter Cover 오일필터커버 1 K-27 DSC-BF005400 Oil Filter Cover Screw 오일필터커버죔나사 3 K-28 CLB-JN000400 Oil Gauge 오일게이지 1 K-29 CMB-BJ003600 Bed Cover 베드커버 1 K-30 DSC-BF010800 Bed Cover Screw 베드커버죔나사 3 K-31 CLB-JM000600 Oil Net 오일망 1 K-32 PSR-AB001000 Fixed Oil Net 오일망고정C링 1 K-33 CLB-BG003100 Oil Hose Holder 오일호스잡이 1 K-34 DSC-BF005400 Oil Hose Holder Screw 오일호스잡이죔나사 1 K-35 CLB-BH001200 Oil Hose Holder(M) 오일호스잡이 ( 중 ) 10 K-36 CLB-JG000800 Oil Hose Ø4 오일호스 Ø4 1 K-37 PPN-AF002000 Spring Pin 오일펌프웜기어스프링핀 1 K-38 CLB-JL005300 Felt 오일환류파이프 ( 하 ) 휄트 1 K-39 PPN-AF001400 Spring Pin 오일환류파이프 ( 하 )( 조 ) 스프링핀 1 K-40 CLB-BK000400 Oil Regulator Block B 오일조절기블럭 B 1 Jan.27.10 K-41 10S100S-306H Spring Pin 스프링핀 2 K-42 DPK-CB000200 Rubber Cap 고무마개 1 K-43 CLB-JP001100 Nipple 니플 2 K-44 PPN-AA000600 Pin 핀 2 K-45 DSC-HZ000900 Screw 오일조정나사 1 K-46 PPK-BA001100 O-Ring O-링 1 K-50 DSC-CB000400 Screw (1/4 n=40, L=6) 죔나사 1 39

L Thread Stand Mechanism 실패꽂이관계 5 4 1 6 3 5 2 9 7 8 10 40

Ref. No. Parts No. Note Name of Parts 품 명 Q ty L-1 AS-000298-00 Thread Stand(Ass y) 실패꽂이 ( 조 ) 1 Set L-2 GP-001517-00 Holder for Thread Guide Sub-Bar 실패꽂이보조가이드잡이 1 L-3 SC-000168-00 Screw 실패꽂이보조가이드잡이고정나사 A (M4 P0.7, L=20) 1 L-4 PSC-AC004900 Screw 실패꽂이보조가이드잡이고정나사 B (M4 P0.7, L=12) 1 L-5 PSN-AA001500 Nut 실패꽂이보조가이드잡이고정너트 (M4 P0.7) 2 L-6 GP-001514-00 Thread Guide Sub-Bar 실패꽂이보조가이드 1 L-7 GP-001516-00 Holder for Thread Guide Bar 실패꽂이가이드잡이 1 L-8 PSC-AC004900 Screw 실패꽂이가이드잡이고정나사 (M4 P0.7, L=12) 2 L-9 PSN-AA001500 Nut 실패꽂이가이드잡이고정너트 (M4 P0.7) 2 L-10 GP-001515-00 Thread Guide Bar 실패꽂이가이드 1 Assembly No. 41

M Accessories Mechanism 액세서리관계 42

Ref. No. Parts No. Note Name of Parts 품 명 Q ty M-1 CMB-LA009201 Belt Cover (Upper) 벨트커버 ( 상 ) 1 M-2 DSC-BF011000 Screw 벨트커버 ( 상 ) 고정나사 (M6 P1.0, L=48, s=12) 2 M-3 CMB-LA009300 Belt Cover (Lower) 벨트커버 ( 하 ) 1 M-4 PSC-DD000100 Taper Screw 벨트커버 ( 하 ) 고정나사 (Ø4.1 P1.8, L=19.7) 3 M-5 CST-FD001900 Oil Reservoir Rubber Cushion 오일팬고무받침 4 M-6 DSC-HB001600 Screw for Oil Reservoir Rubber Cushion(L) 오일팬고무받침고정나사 ( 대 ) 4 M-7 DWS-AA005500 Washer for Bed Support Bar 오일팬고무받침고정나사 ( 대 ) 와셔 ( 호칭8, 소형원 ) 8 M-8 PWS-CA001500 Spring Washer 오일팬고무받침고정나사 ( 대 ) 스프링와셔 ( 호칭8) 4 M-9 PSN-AA003000 Nut 오일팬고무받침고정나사 ( 대 ) 너트 (M8 P1.25, H=5) 4 M-10 DSC-HB001700 Screw for Oil Reservoir Rubber Cushion(S) 오일팬고무받침고정나사 ( 소 ) 4 M-11 CST-BJ000300 Bed Support Bar 베드지지대 2 M-12 PSC-AC006500 Screw 베드지지대고정나사 (M8 P1.25, L=45) 4 M-13 DWS-AA005500 Washer for Bed Support Bar 베드지지대고정와셔 8 M-14 CST-FB000300 Rubber Washer for Bed Support Bar 베드지지대고무와셔 4 M-15 CMB-FD001100 Cushion Rubber for Bed Support Bar 베드지지대쿠션고무 4 M-16 DSN-CY000100 Nut for Bed Support Bar Cushion Rubber 베드지지대고정너트 4 M-17 GP-001568-00 Guide for Pedal Chain 발판체인안내 1 M-18 DSC-BF008400 Screw 발판체인안내고정나사 (3/16 n=28 L=10) 2 M-19 AS-000294-00 Pedal for Presser Foot(Ass y/non-auto. Trimmer) 누름대올리기발판 ( 조 / 비사절용 ) 1 Set M-20 91S016S-306H Chain 체인 1 M-21 91S017S-306H S/Shape Hook S자고리 2 M-22 91-001C-1230 Accessory Bag 액세서리백 1 M-23 91-102C-1230 Screw Driver(L) 드라이버 ( 대 ) 1 M-24 91-003C-1230 Screw Driver(M) 드라이버 ( 중 ) 1 M-25 PTL-BA000200 Screw Driver(S) 드라이버 ( 소 ) 1 M-26 GP-001624-00 Screw Driver for Needles 바늘드라이버 1 M-27 PTL-AB000100 L-Type Hexagonal Wrench(2mm) L자렌치 (2mm) 1 M-28 PTL-AB000300 L-Type Hexagonal Wrench(2.5mm) L자렌치 (2.5mm) 1 M-29 PTL-AB000500 L-Type Hexagonal Wrench(3mm) L자렌치 (3mm) 1 M-30 PTL-AB000400 L-Type Hexagonal Wrench(4mm) L자렌치 (4mm) 1 M-31 CAC-JB000100 Oiler 오일주유통 1 M-32 GP-002421-00 Bottle of Oil 오일 1 M-33 91-020A-300G Thread Tweezers 핀셋 1 M-34 GP-002419-00 Needle 바늘 (UY 128 GAS #10) 5 M-35 91-106C-2700 Head Cover 미싱커버 1 M-36 GP-027465-00 Bed Support Bar(C Type) 베드지지대 (C타입내림테이블용 ) 1 Assembly No. 43

N Thread Trimmer Mechanism 1 사절관계 1 1 16 36 20 21 22 34 23-1 23 25 23-2 35 17 30 36 26 27 24-1 25 29 28 31 32 18 24-2 33 44

Ref. No. Parts No. Note Name of Parts 품 명 Q ty N-1 CPM-CM001100 Knee-lifting Lever(Auto. Trimmer) 무릎올림레버 ( 사절용 ) 1 N-2 CTR-CM000601 Tension Release Lever 실늦추기레버 1 N-3 PSC-AC006200 Screw 실늦추기레버고정나사 (M4 P0.7, L=15) 1 N-4 PPP-AD000100 Air Tube 스피드콘트롤러에어튜브 (Ø4, L=150) 1 N-5 CWP-BB000700 Bracket for Speed Controller 스피드콘트롤러브라켓 1 N-6 PPP-AB000200 Speed Controller 스피드콘트롤러 (AS 1000F) 1 N-7 DSC-BF010200 Screw 스피드콘트롤러고정나사 (M3 P0.5, L=12.5) 2 N-8 PPP-AD000100 Air Tube 에어와이퍼에어튜브 (Ø4, L=150) 1 N-9 CWP-BJ001100 Support Plate for Air Wiper 에어와이퍼지지판 1 N-10 DWS-AA003200 Washer for Air Wiper Support Plate 에어와이퍼지지판와셔 2 N-11 PSC-AC013000 Screw 에어와이퍼지지판고정나사 (M4 P0.7, L=8) 2 N-12 AWP-PS001000 Air Wiper(Ass y) 에어와이퍼 ( 조 ) 1 Set N-12-1 CWP-BQ000200 Air Wiper Pipe 에어와이퍼파이프 1 N-12-2 CWP-BB000600 Air Wiper Bracket 에어와이퍼브라켓 1 N-13 DWS-AA003200 Washer for Air Wiper 에어와이퍼와셔 2 N-14 PSC-AC013000 Screw 에어와이퍼고정나사 (M4 P0.7, L=8) 2 N-15 CTR-KC000201 Tension Release Shaft 실늦추기구동축 1 N-16 CMB-BQ001000 Thread Eyelet Pipe 실안내파이프 2 N-17 CTR-BB000600 Guide for Thread Pull-off Bar 실늦추기봉가이드 1 N-18 DSC-BF010800 Screw 실늦추기봉가이드고정나사 (M4 P0.7, L=4.8) 2 N-19 CTR-KC000301 Thread Pull-off Bar 실늦추기봉 1 N-20 DSP-AA004500 Swing-Proof Spring for Thread Pull-off Bar 실늦추기봉흔들림방지스프링 1 N-21 DCL-AA004500 Collar for Thread Pull-off Bar 실늦추기봉카라 1 N-22 DSC-BJ001100 Screw 실늦추기봉카라고정나사 (9/64 n=40, L=4.5) 1 N-23 AS-000337-00 Thread Pull-off Hook Holder A (Ass y) 실늦추기고리잡이 A ( 조 ) 3 Set N-23-1 CTR-BF000200 Thread Pull-off Hook Holder A 실늦추기고리잡이 A 3 N-23-2 CTR-BH000900 Thread Pull-off Hook 실늦추기고리 3 N-24 AS-000338-00 Thread Pull-off Hook Holder B (Ass y) 실늦추기고리잡이 B ( 조 ) 2 Set N-24-1 CTR-BF000300 Thread Pull-off Hook Holder B 실늦추기고리잡이 B 2 N-24-2 CTR-BH000900 Thread Pull-off Hook 실늦추기고리 4 N-25 DSC-CA002500 Screw 실늦추기고리잡이고정나사 (9/64 n=40, L=3) 5 N-26 CTR-BF000100 Thread Pull-off Bar Holder 실늦추기봉잡이 1 N-27 DSC-BJ001100 Screw 실늦추기봉고정나사 (9/64 n=40, L=4.5) 1 N-28 CTR-CM000700 Thread Pull-off Lever 실늦추기구동레버 1 N-29 RI-000016-00 Retaining Ring 실늦추기봉잡이고정멈춤링 ( 호칭경4 E형 ) 1 N-30 PPN-AF001600 Roll Pin 실늦추기구동레버고정핀 ( 호칭경 4 Spring Pin, L=16) 1 N-31 CTR-DC000100 Thread Pull-off Eccentric 실늦추기구동편심캠 1 N-32 DSP-AA004400 Swing-Proof Spring for Tension Disc Separator 실조절장치접시열림판흔들림방지스프링 1 N-33 DSC-BA001800 Screw 실늦추기구동편심캠고정나사 (9/64 n=40, L=13) 1 N-34 CTA-BJ001400 Tension Post Support 실조절장치베이스 1 N-35 CTA-BJ001500 Tension Disc Separator 실조절장치접시열림판 1 N-36 DSC-BF005400 Screw 실조절장치베이스고정나사 (M4 P0.7, L=7.8) 2 N-37 17-0000-SE55 Syncro. Sensor 싱크로센서 1 N-38 DSC-BB003000 Screw 싱크로고정나사 (M3 P0.5, L=7) 2 N-39 CUS-BB001100 Sensor Bracket 싱크로브라켓 1 N-40 PSC-AC001800 Screw 싱크로브라켓고정나사 (M4 P0.7, L=8) 2 N-41 PWS-AA001800 Washer 싱크로브라켓와셔 ( 호칭경4) 2 Applied Period 45