OEM & System Integration Weighing Components 16 News Industry 4.0 Industry 4.0 IT, 1 (DFKI) SmartFactory KL Industry 4.0( ) SmartFactory KL 50 1 SmartFactory KL RFID(Radio Frequency Identification) " " RFID,,. RFID 1.. SmartFactory KL.
Industry 4.0/ 2 1 1.1 1.2 1.3 1.4 1.5 1.6. Industry 4.0 RAMI 4.0 Industry 4.0 RAMI 4.0 SmartFactory KL IEC62890 2.1 2.2 (RAMI 4.0). " " " " " " SmartFactory KL 1 1.1 : 1.2 : 1.3 :. IEC 62264 // IEC 61512 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3 OPC UA 1.4 : 1.5 : RFID 1.6 : 2 2.1 : 2.2 : 3 3.1 : 3.2 : 3.3 : 3.4 : PLC,,, 3.5 : 3.6 3.7 / Mettler-Toledo GmbH Industrial Division Heuwinkelstrasse CH-8606 Nänikon Switzerland 02/2017 Mettler-Toledo GmbH 2 METTLER TOLEDO OEM & System Integration News 16
SmartFactory KL, WMS RFID., www.mt.com/ind-4-0-oe www.mt.com/ind-wp-wbqc-oe. RFID WMS 400g 0.1mg 4 www.mt.com/wms-oe METTLER TOLEDO OEM & System Integration News 16 3
5 PLC Siemens Allan Bradley PLC, PLC 5 PROFINET IO RT Siemens S7 EtherNet/IP Allan Bradley PROFINET IO RT Siemens EtherNet/IP Allan Bradly PLC,,. Ethernet. PROFINET IO RT EtherNet/IP. PLC PLC Siemens TIA Allan Bradley Studio 5000 PLC PLC /,,. 100 t 0.1mg PROFINET IO RT EtherNet/IP 4 METTLER TOLEDO OEM & System Integration News 16
The present and future of network technologies in production are based on the Industrial Ethernet standard. Common solutions using this technology are PROFINET IO RT and EtherNet/IP. Sensors and actuators that comply 1.1. Check with those configuration standards of can weighing be easily device integrated into PLC systems if vendors provide the right tools and designed installation- via the webserver friendly products. The configuration of the weigh module can be checked Power from the webserver. Connect the weigh module to a Suppliy Overview computer via a Power-over-Ethernet Switch using an This document explains the key points for integrating a RJ45/M12 patch cable. Enter the weigh module s IP WMF high-precision weigh module into Allen-Bradly and address (default: 192.168.0.55) into the computer s Siemens PLC Systems. It addresses project managers, browser. network designers and software engineers by providing WMF a brief guideline for establishing basic connectivity to Note: An IEEE 802.3af Power-over-Ethernet Switch is necessary to provide electric power to the weigh test the functionally of hardware and software. module. Power Suppliy Power over Ethernet Switch Application The examples in this document use the WMF high-precision weigh module. However, the content is not limited to that particular weighing device. It can be applied configuration including type, software version, IP-Ad- The webserver identifies the individual weigh module to many other METTLER TOLEDO products that provide dress but also specifications and weighing parameters. It is also possible to show the weight value. PROFINET IO and EtherNet/IP connectivity. Content 1. Configuring weighing device via the web 2. Connecting Siemens S7 PLC via PROFINET IO 3. Connecting Allen-Bradley PLC via EtherNet/IP 4. Programming the PLC with weighing data 5. Conclusion Network for connecting to a Siemens PLC over TIA Portal or Simatic Step 7 Manager via PROFINET IO requires an IEEE 802.3af Power-over-Ethernet switch to provide power to the weigh module. The configuration is illustrated with TIA Totally Integrated Automation. The configuration with Simatic Step 7 Manager is similar to TIA portal. After installation of the GSDML file, the WMF weigh module is available in the hardware catalog. It can be added to the project by dragging and dropping the file. The Device Description File of the weighing device includes all the needed information. There is no additional configuration needed. The configuration parameters for the WMF weigh module are available, as well as the Module Parameters, such as filter settings, stability criteria and adjustment configuration. The WMF Weigh module s IP address and device name must be configured in the project and in the HW configuration tool. Default values are WMF and 192.168.0.55. If more than one weigh module is connected, the addresses of the additional modules have to be changed. For example: 192.168.0.51, 192.168.0.52, etc. The status LED on the weigh module shows installation and communication is working. The second LED blinks in red if the module is not connected to a PROFINET network. PLC-I/O PROFINET IO RT EtherNet/IP PLC /. PLC www.mt.com/ind-connect-plc-oe Engineering Note Efficient Integration Weighing for Common PLC Systems Engineering Note 2. Connecting Siemens S7 PLC via PROFINET IO Engineering Note : PLC PLC www.mt.com/ind-connect-plc-oe METTLER TOLEDO OEM & System Integration News 16 5
ISO 9001 (2018 ) ISO 9001:2015. ISO 9001, 2018.,. Good Weighing Practice (GWP ) GWP, Good Weighing Practice TM Good Weighing Practice TM, 6 METTLER TOLEDO OEM & System Integration News 16
GWP, www.mt.com/oem-service-oe 2018 ISO 9001 ISO9001 2015 " - - - - ". 2018 9. 5,000 METTLER TOLEDO OEM & System Integration News 16 7
: (OSD) Dr. Ralf Weinekötter?? OSD API,. 50 ~ 250?,, ( ). Dr. Ralf Weinekötter, Gericke AG, Dr. Weinekötter University Karlsruhe ENSIC Nancy ETH-Zürich " (Continuous mixing of fine solids)" Weinekötter (Mixing of Solids) Springer Verlag, 8 METTLER TOLEDO OEM & System Integration News 16
.? API.?,..,,..?, www.gericke.net : : : : : 2 x 2 x 2 www.mt.com/ind-continuous-dosing-oe METTLER TOLEDO OEM & System Integration News 16 9
?, ISO9001:2015 Good Weighing Practice (GWP ) ISO ERP IP69k 316 10 METTLER TOLEDO OEM & System Integration News 16
Company Contact Department / Position Building Street Zip code / City ABC Machine Manufacturer john Sampleman Production Manager Machine Assembly Road to Success 1234 Moderntown Date Monday, 15. August 2016 Scale Maximum capacity 30 kg Readability (d) 0.1 g Hazardous approval no Wet application ( IP 65) yes Terminal type name ICS429 Maximum weight 30 kg Smallest net weight 50 g Weighing accuracy 1 % Safety factor required 2 Standards and Regulations Expansion Factor k 2 Minimum weight typical 10 1) g Weighing accuracy 1 % Safety factor* 5 * Based on typical minimum weight The specified device meets the user requirements for accuracy procedures, test frequencies and weights to maintain reliable weighing accuracy of the device over time. GWP Verification can be issued for all weighing equipment of any manufacturer.,. GWP GWP, www.mt.com/gwp-oe Good Weighing Practice TM Specified Scale PBK989-AB30 (300'000d) User Requirements Value Unit Achievements GWP Recommendation In addition to a GWP Recommendation, METTLER TOLEDO recommends GWP Verification to determine the actual minimum weight and safety factor of this device on site. Furthermore, GWP Verification provides all necessary information on test Ask for a GWP Verification of your installed base to reduce costs and risks. Plus, receive complete audit-proof documentation at one glance. Windows PC IP69k. VS www.mt.com/gwp-oe METTLER TOLEDO OEM & System Integration News 16 11
예측 가능한 유지보수 원격 성능 모니터링 InTouchSM 원격 서비스는 클라우드 기반, 상용 솔루션으로 간편한 유지보수가 가능해졌으 며 대형 및 중소업체에서 발생하던 가동 중단 시간은 지난 이야기가 되었습니다. 기계 제조 업체에서는 예측 가능한 InTouch 유지보수와 고객 모니터링의 이점을 제공할 수 있습니다. 경보 경보 Pharma Workflow 이벤트 양호 양호 경보 양호 양호 이벤트 양호 양호 InTouch를 활용한 상당한 경쟁 우위 외에도, 유료 서비스로서 보증 기간 및 추후에 귀하의 장비 성능과 관련하여 유익한 정보를 받을 수 있습니다. 원경 성능 모니터링에 대한 자세한 정보는 다음 주소를 방문하십시오. www.mt.com/ind-intouch-remote-oe Mettler-Toledo GmbH Industrial Division CH-8606 Nänikon, Switzerland 현지 연락처: www.mt.com/contacts MTSI 30321450 www.mt.com/ind-oe 자세한 정보