02 07 1 3 24 35 42 6 1 63 71 77 86 95 96
2
_ 3
4
_ 5
6
_7
8
_ 9
1 0
_ 11
1 2
_ 13
1 4
_ 15
1 6
_ 17
1 8
_ 19
2 0
_ 21
2 2
_ 23
2 4
www.kats.go.kr www.kats.go.kr _ 25
2 6
www.kats.go.kr www.kats.go.kr _ 27
2 8
www.kats.go.kr www.kats.go.kr _ 29
3 0
www.kats.go.kr www.kats.go.kr _ 31
3 2
www.kats.go.kr www.kats.go.kr _ 33
3 4
Focus The Monthly Technology & Standards _ 35
3 6 Focus
_ 37
3 8 Focus The Monthly Technology & Standards
_ 39
Focus The Monthly Technology & Standards 4 0
_ 41
4 2
_ 43
4 4
_ 45
4 6
_ 47
4 8
_ 49
5 0
_ 51
5 2
_ 53
5 4
_ 55
5 6
_57
5 8
_ 59
6 0
_ 61
6 2
_ 63
6 4
_65
6 6
_ 67
6 8
_ 69
7 0
_ 71
7 2
The Monthly Technology & Standards _ 73
7 4
The Monthly Technology & Standards _ 75
7 6
_ 77
7 8
_ 79
8 0
_ 81
8 2
_ 83
8 4
_ 85
8 6
_ 87
8 8
_ 89
9 0
_ 91
9 2
_ 93
9 4
_95
9 6
TC 6 ISO/DIS 5269-3 Pulps- Preparation of laboratory sheets for physical testing- Part 3: Conventional and rapid-kothen sheet formers using a closed water system TC 17 ISO/DIS 16918-1 Iron and steel- Determination of nine elements by the inductively coupled plasma atomic mass spectroscopic method- Part 1: Determination of tin, antimony, cerium, lead and bismuth TC 22 ISO/DIS 8820-1 Road vehicles- Fuse-links- Part 1: Definitions and general test requirements (Revision of ISO 8820-1:2002) TC 23 ISO/DIS 6531 Machiner for forestry- Portable chain-saws- Vocabulary (Revision of ISO 6531:1999) ISO/DIS 6532 Machiner for forestry- Portable chain-saws- Technical data (Revision of ISO 6532:1993) ISO/DIS 6535 ISO/IDS 7112 ISO/DIS 11682 Machiner for forestry- Portable chain-saws- Chain brake performance (Revision of ISO 6535:1991, ISO 6535:1991/Cor 1:2004) Machiner for forestry- Portable brush-cutters and grass-trimmers- Vocabulary (Revision of ISO 7112:1999) Machiner for forestry- Portable brush-cutters and grass-trimmers- Technical data (Revision of ISO 11682:1993) TC 24 ISO/DIS 9276-3 Representation of results of particle size analysis- Part 3: Adjustment of an experiment curve to a reference model TC 31 ISO/DIS 3739-3.2 Industrial tyres and rims- Part 3: Rims (Revision of ISO 3739-3:1995) ISO/DIS 9112 Truck and bus tyres- Methods of measuring tyre rolling circumstance- Loaded new tyres (Revision of ISO 9112:1991) TC 34 ISO/DIS 8196-1 Milk- Definition and evaluation of the overall accuracy of alternative methods of milk analysis- Part 1: Analytical attributes of alternative methods (Revision of ISO 8196-1:2000) ISO/DIS 8196-2 Milk- Definition and evaluation of the overall accuracy of alternative methods of _ 97
milk analysis- Part 2: Calibration and quality control in the dairy laboratory (Revision of ISO 8196-2:2000) ISO/DIS 8196-3 Milk- Definition and evaluation of the overall accuracy of alternative methods of milk analysis- Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis TC 42 ISO/DIS 14524 Phtography- Electronic still-picture cameras- Methods for measuring optoelectronic conversion functions (OECFs) (Revision of ISO 14524:1999) TC 45 ISO/DIS 1658 Naturla rubber (NR)- Evaluation procedure (Revision of ISO 1658:1994) ISO/DIS 2781 Rubber, vulcanized or thermoplastic- Determination of density (Revision of ISO 2781:1988, ISO 2781:1988/Cor 1:1996) ISO/DIS 4642-1 Rubber and plastic hoses, non-collapsible, for fire-fighting service- Part 1: Semi-rigid hoses for fixed systems (Revision of ISO 4642:1978) ISO/DIS 4642-2 Rubber and plastic hoses, non-collapsible, for fire-fighting service- Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles (Revision of ISO 4642:1978) ISO/DIS 5771 ISO/DIS 7267-1 ISO/DIS 7267-2 ISO/DIS 7743 ISO/DIS 24698-2 Rubber hoses and hose assemblies for transferring anhydrous ammonia- Specification (Revision of ISO 5771:1994, ISO 5771:1994/Cor 1:1995) Rubber-covered rollers- Determination of apparent hardness- Part 1: IRHD method (Revision of ISO 7267-1:1997) Rubber-covered rollers- Determination of apparent hardness- Part 2: Shoretype compression stress-strain properties (Revision of ISO 7267-2:1986) Rubber, vulcanized or thermoplastic- Determination of compression stressstrain properties (Revision of ISO 7743:2004) Rubber, raw- Determination of bound acrylonitrille content in acrylonitrillebutadiene rubber(nbr)- Part 2: Kjedahl method TC 54 ISO/DIS 4720 Essential oils- Nomenclature (Revision of ISO 4720:2002) ISO/DIS 22769 ISO/DIS 23594 Oil of Australian sandalwood (Santalum spicatum (R. Br.) A. DC.) Oil of lime expressed, Persian type (Citrus latifolia Tanaka) TC 61 ISO/DIS 4892-1 Plastics- Methods of exposure to laboratory light sources- Part 1: General guidance (Revision of ISO 4892-1:1999) ISO/DIS 9370 Plastics- Instrumental determination of radiant exposure in weathering tests- 9 8
General guidance and basic test method (Revision of ISO 9370:1997) ISO/DIS 19712-1 Plastics- Decorative solid surfacing materials- Part 1: Classification and s p e c i f i c a t i o n s TC 67 ISO/DIS 25457 Petroleum, petrochemical and natural gas industries- Flare details for general refinery and petrochemical service TC 110 ISO/DIS 6292 Powered industrial trucks and tractors- Brake performance and component strength (Revision of ISO 6292:1996) TC 127 ISO/DIS 10265.2 Earth-moving machinery- Crawler machines- Performance requirements and test procedures for braking systems (Revision of ISO 10265:1998) TC 131 ISO/DIS 2941 Hydraulic fluid power- filter elements- Verification of collapse/burst pressure rating (Revision of ISO 2941:1974) TC 150 ISO/DIS 14708-3 Implants for surgery- Active implantable medical devices- Part 3: Implantable neurostimulators ISO/DIS 14708-4 Implants for surgery- Active implantable medical devices- Part 4: Implantable infusion pumps TC 164 ISO/DIS 6892 Metallic materials- Tensile testing-method of testing at ambient temperature (Revision of ISO 6892:1998) TC 178 ISO/DIS 22201 Lifts (elevators)- Design and development of programmable electronic system in safey related application for lifts (PESSRAL) TC 190 ISO/DIS 17512-1.2 Soil quality- Avoidance test for testing the quality of soils and effects of chemicals on behaviour- Part 1: Test with earthworms (Eisenia fetida and Eisenia andrei) TC 194 ISO/DIS 10993-9 Biological evaluation of medical devices- Part 1: Framework for identification and quantification of potential degradation products (Revision of ISO 10993-9 : 1999 ) TC 206 ISO/DIS 14704 Fine ceramics (advanced ceramics, advanced technical ceramics)- Test method for flexural strength of monolithic ceramics at room temperature (Revision of ISO 14704:2000, ISO 14704:2000/Cor 1:2004) ISO/DIS 14705 Fine ceramics (advanced ceramics, advanced technical ceramics)- Test method for hardness of monolithic ceramics at room temperature (Revision of ISO 14705:2000) TC 219 ISO/DIS 26987 Resilient floor coverings- Determination of staining and resistance to chemicals T M B ISO/DIS 29862 Self adhesive tapes- Determination of peel adhesion properties _ 99
ISO/DIS 29863 ISO/DIS 29864 Self adhesive tapes- Measurement of static shear adhesion elf adhesive tapes- Measurement of breaking strength and elongation at break JTC 1 ISO/IEC DIS 7501-1 Identification cards- Machine readable travel documents- Part 1: Machine readable passport (Revision of ISO/IEC 7501-1:2005) ISO/IEC DIS 17343 ISO/IEC DIS 18051 ISO/IEC DIS 18056 ISO/IEC DIS 29382 ISO/IEC DIS 29642 Information technology- Corporate telecommunication networks- Signalling interworking between QSIG and SIP- Basic services (Revision of ISO/IEC 1 7 3 4 3 : 2 0 0 4 ) Information technology- Telecommunications and information exchange between systems- Services for Computer Supported Telecommunications Applications (CSTA) Phase III (Revision of ISO/IEC 18051:2005) Information technology- Telecommunications and information exchange between systems- XML protocol for Computer Supported Telecommunications Applications (CSTA) Phase III (Revision of ISO 18956:2005) Corporate Governance of Information and Communication Technology Information technology- Data interchange on 120 mm and 80 mm optical disk using + RW DL format- Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4x) TC 8 ISO/FDIS 20672 Ships and marine technology- Rate of turn indicators ISO/FDIS 20673 Ships and marine technology- Electric rudder angle indicators TC 21 ISO/FDIS 7240-22 Fire detection and alarm systems- Part 22: Smoke-detection equipment for d u c t s TC 22 ISO/FDIS 7634 Road vehicles- Compressed air braking systems for towed vehicles including those with electronic braking control functions- Test procedures (Revision of ISO 7634:2003) TC 24 ISO/FDIS 21501-2 Determination of particle size distribution- Single particle light interaction methods- Part 2: Light scattering liquid-borne particle counter (Revision of ISO 13323-1 : 2000 ) ISO/FDIS 21501-3 ISO/FDIS 21501-4 Determination of particle size distribution- Single particle light interaction methods- Part 3: Light extinction liquid-borne particle counter (Revision of ISO 1 3 3 2 3-1 : 2 0 0 0 ) Determination of particle size distribution- Single particle light interaction 1 0 0
methods- Part 4: Light scattering airborne particle counter for clean spaces (Revision of ISO 13323-1:2000) TC 27 ISO/FDIS 21398 Hard coal and coke- Guidance to the inspection of mechanical sampling s y s t e m s TC 33 ISO/FDIS 10081-4 Classification of dense shaped refractory products- Part 4: Special products TC 34 ISO 6579:2002/ Microbology of food and animal feeding stuffs- Horizontal method for the FDAmd 1 detection of Salmonella spp.- Amendment 1: Annex D: Detection of Salmonella spp. in animal faeces and in samples from the primary production s t a g e TC 35 ISO/FDIS 15181-1 Paints and varnishes- Determination of release rate of biocides from antifouling paints- Part 1: General method for extraction of biocides (Revision of ISO 15181-1 : 2000 ) ISO/FDIS 15181-2 ISO/FDIS 15181-3 Paints and varnishes- Determination of release rate of biocides from antifouling paints- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (Revision of ISO 15181-2:2000) Paints and varnishes- Determination of release rate of biocides from antifouling paints- Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the e x t r a c t TC 38 ISO/FDIS 20743 Textiles- Determination of antibacteria activity of antibacterial finished products TC 41 ISO/FDIS 252 Conveyor belts- Adhesion between constitutive elements- Test methods (Revision of ISO 252-1:1999, ISO 252-1:1999/Cor 1:2006) ISO/FDIS 283 ISO/FDIS 583 ISO/FDIS 703 Textile conveyor belts- Full thickness tensile strength, elongation at break and elongation at the reference load- Test method (Revision of ISO 283-1:2000, ISO 283-1:2000/Cor 1:2006) Conveyor belts with a textile carcass- Total belt thickness and thickness of constitutive elements- Test methods (Revision of ISO 583:2990, ISO 583-1:1999) Conveyor belts- Transverse flexibility (throughability)- Test method (Revision of ISO 703:1988, ISO 703-1:1999) TC 45 ISO/FDIS 1795 Rubbers, raw natural and raw synthetic- Sampling and further preparative procedures (Revision of ISO 1795:2000) ISO/FDIS 8331 Rubber and plastics hoses and hose assemblies- Guidelines for selection, _ 101
storage, use and maintenance (Revision of ISO 8331:1991) TC 61 ISO/FDIS 1209-1 Rigid cellular plastics- Determination of flexural properties- Part 1: Basic bending test (Revision of ISO 1209-1:2004) ISO/FDIS 1209-2 Rigid cellular plastics- Determination of flexural properties- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity (Revision of ISO 1209-2:2004) ISO/FDIS 7823-3 Plastics- Poly(methyl methacrylate) sheets- Types, dimensions and characteristics- Part 3: Continuous cast sheets (Revision of ISO 7823-3:2003) TC 87 ISO/FDIS 9727-1 Cylindrical cork stoppers- Physical test- Part 1: Determination of dimensions (Revision of ISO 9727:1991) ISO/FDIS 9727-2 ISO/FDIS 9727-3 ISO/FDIS 9727-4 ISO/FDIS 9727-5 ISO/FDIS 9727-6 ISO/FDIS 9727-7 Cylindrical cork stoppers- Physical test- Part 2: Determination of mass and apparent density for agglomerated cork stoppers (Revision of ISO 9727:1991) Cylindrical cork stoppers- Physical test- Part 3: Determination of humidity content (Revision of ISO 9727:1991) Cylindrical cork stoppers- Physical test- Part 4: Determination of dimensional recovery after compression (Revision of ISO 9727:1991) Cylindrical cork stoppers- Physical test- Part 5: Determination of extraction force (Revision of ISO 9727:1991) Cylindrical cork stoppers- Physical test- Part 6: Determination of liquid tightness (Revision of ISO 9727:1991) Cylindrical cork stoppers- Physical test- Part 7: Determination of dust content (Revision of ISO 9727:1991) TC 104 ISO/FDIS 18185-5 Freight containers- Electronic seals- Part 5: Physical layer TC 112 ISO/FDIS 9803-1 Vacuum technology- Mounting dimensions of pipeline fittings- Part 1: Non knife-edge flange type (Revision of ISO 9803:1993) ISO/FDIS 9803-2 ISO/FDIS 21360 Vacuum technology- Mounting dimensions of pipeline fittings- Part 2: Knifeedge flange type (Revision of ISO 9803:1993) Vacuum technology- Standard method for measuring vacuum-pump performance- General description TC 127 ISO/FDIS 5010 Earth-moving machinery- Rubber-tyred machines- Steering requirements (Revision of ISO 5010:1992) 1 0 2
TC 146 ISO/FDIS 17713-1 Meteorology- Wind measurement- Part 1: Wind tunnel test methods for rotating anemometer performance TC 162 ISO/FDIS 15821 Doorsets and windows- Water-tightness test under dynamic pressure- Cyclonic aspects ISO/FDIS 15822 Test method of doorset opening performance in diagonal deformation- Seismic a s p e c t s TC 163 ISO/FDIS 21129 Hygrothermal performance of building materials and products- Determination of water-vapour transmission properties- Box method TC 164 ISO/FDIS 10275 Metallic materials- Sheet and strip- Determination of tensile strain hardening exponent (Revision of ISO 10275:1993) TC 172 ISO/FDIS 14999-4 Optics and photonics- Interferometric measurement of optical elements and optical systems- Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 TC 190 ISO/FIDS 23470 Soil quality- Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution TC 209 ISO/FDIS 14644-6 Cleanrooms and associated controlled environments- Part 6: Vocabulary TC 221 ISO/FDIS 10722 Geosynthetics- Index test procedure for the evaluation of mechanical damage under repeated loading- Damage caused by granular material (Revision of ISO/TR 10722-1:1998) JTC 1 ISO/IEC FDIS 15417 Information technology- Automatic identification and data capture techniques- Code 128 bar code symbology specification (Revision of ISO/IEC 15417:2000) ISO/IEC FDIS 15457-2 ISO/IEC FDIS 16388 ISO/IEC FDIS 16390 ISO/IEC FDIS 19794-10 ISO/IEC FDIS 25030 Identification cards- Thin flexible cards- Part 2: Magnetic recording technique (Revision of ISO/IEC 15457-2:2001) Information technology- Automatic identification and data capture techniques- Code 39 bar code symbology specification (Revision of ISO/IEC 16388:1999) Information technology- Automatic identification and data capture techniques- Interleaved 2 of 5 bar code symbology specification (Revision of ISO/IEC 16390:1999) Information technology- Biometric data interchange formats- Part 10: Hand geometry silhouette data Software engineering- Software product Quality Requirements and Evaluation (SQwaRE)- Quality requirements _ 103
3 C / 1 5 2 3 / C D V IEC 60417-5975 Pr Electronic image, general 20 / 879 / F D I S IEC 60287-3-3 Ed.1 Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources 31 / 688 / C D V IEC 60079-31 Ed. 1.0 Explosive Atmospheres - Part 31: Equipment dust ignition protection by enclosure t D 40 / 1839 / C D V IEC 60384-11 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. c a p a c i t o r s 40 / 1840 / C D V IEC 60384-11-1 Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level E 44 / 551 / D T R IEC 62513 Safety of machinery - Guideline for use of communication systems in safetyrelated applications 47 A / 768 / C D V IEC 62433-2 Models of Integrated Circuits for EMI behavioural simulation - ICEM-CE, ICEM Conducted Emission Model 4 8 B / 1 7 5 5 / C D V IEC 61984 Ed.2 Connectors - Safety requirements and tests 65 B / 618 / C D V IEC 61298-1 Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 1: General considerations 65 B / 619 / C D V IEC 61298-2 Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 2: Tests under reference c o n d i t i o n s 65 B / 620 / C D V IEC 61298-3 Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 3: Tests for the effects of influence quantities 65 B / 621 / C D V IEC 61298-4 Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 4: Evaluation report content 7 7 A / 5 6 2 F / C D V Amendement à la C o m p a t i b i l i té él e c t r o m a g nétique (CEM) -Techniques d essai et de mesures - CEI 61000-4-7 Guide général relatif aux mesures d harmoniques et d interharmoniques, ainsi q u à l appareillage de mesure, applicable aux réseaux d alimentation et aux 1 0 4
appareils qui y sont raccordés 86 B / 2495 / F D I S IEC 62005-9-2 Ed. 1.0 Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - single mode 89 / 805 / C D V IEC 60695-1-30 Ed 2.0 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines 100 / 1212 / C D V IEC 61966-2-5 Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - oprgb (TA2) C I S / B / 418 F / C D V CISPR 11 Ed.5 Appareils industriels, scientifiques et médicaux - Caractéristiques des perturbations radioélectriques - Limites et méthodes de mesure 17 B / 1547 / D T R IEC 61912-1 TR Ed.1 Application of the short-circuit ratings of low-voltage switchgear and c o n t r o l g e a r 45 / 642 / F D I S IEC 60412 Ed.2 Nuclear instrumentation - Scintillation detectors - Nomenclature (Identification) - Standard dimensions of scintillators 4 5 A / 6 5 2 / C D V IEC 60964 Ed.2 Nuclear Power Plants - Control Rooms - Design 46 / 217 A / C D V IEC 61935-1 Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling 57 / 871 / C D V IEC 61970-301 Ed.2 Energy management system application program interface (EMS-API)- Part 301: Common information model (CIM) base 61 J / 252 / F D I S IEC 60335-2-79-A2 Household and similar electrical appliances - Safety - Part 2-79: Particular Ed 2.0 requirements for high pressure cleaners and steam cleaners 68 / 341 / C D V Amendment 1 to Magnetic materials - Part 2: Methods of measurement of magnetic properties IEC 60404-2 Ed3 of electriacal steel sheet and strip by means of an Epstein frame 91 / 651 / F D I S IEC 60068-2-82, Ed. 1 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components 91 / 652 / F D I S IEC 61192-5, Ed. 1 Workmanship requirements for soldered electronic assemblies- Part 5: Rework, modification and repair of soldered electronic assemblies 95 / 207 / C D V IEC 60255-26 Ed.2 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements 1 0 6 / 1 2 5 / F D I S IEC 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency _ 105
range - Methods for calculating the current density and internal electric field induced in the human body. Part 3-1: Exposure to electric fields - Analytical and 2D numerical models 17 C / 386 F / C D V CEI 62271-205 Ed.1 Appareillage à haute tension - Partie 205: Ensembles d appareillages compacts pour tensions assignées supérieures à 52 kv 17 D / 352 / D T R IEC 61641 TR Ed.2 Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault 1 8 / 1 0 5 2 / F D I S IEC 61892-4 Ed.1 Mobile and fixed offshore units - Electrical installations - Part 4: Cables 56 / 1187 / C D V D e p e n d a b i l i t y Application guide - Guideline for the specification of maintenance support management - Part 3-16 s e r v i c e s 7 8 / 6 9 5 / C D V IEC 60743 A1 Live working - Terminology for tools, equipment and devices 86 B / 2508 / F D I S IEC 61300-2-49 Ed. 1.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector Installation Test 86 B / 2509 / F D I S IEC 61300-2-50 Ed. 1.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode 86 B / 2510 / F D I S IEC 61300-2-51 Ed. 1.0 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - singlemode and multimode 86 C / 752 / C D V IEC 61290-11-1 Ed. 2.0 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion - Jones matrix eigenanalysis (JME) 8 6 C / 7 5 4 / C D V IEC 61290-3 Ed. 2.0 Optical amplifiers- Test methods- Part 3: Noise figure parameters 1 0 0 / 1 2 1 6 / C D V Amendment 1 to Digital audio interface - Part 4: Professional applications (TA4) IEC 60958-4 2 / 1433 / F D I S IEC 60034-12 Rotating electrical machines - Part 12: Starting performance of single-speed Amend.1 Ed.2 three-phase cage induction motors 7 / 572 / C D V IEC 62420 Ed.1.0 Concentric lay stranded overhead electrical conductors containing one or more g a p ( s ) 1 7 B / 1 5 5 0 / F D I S IEC 60947-1 Ed.5 Low-voltage switchgear and controlgear - Part 1: General rules 1 8 / 1 0 5 3 / F D I S IEC 60092-503 Ed.2 Electrical installations in ships - Part 503: Special features - AC supply systems 1 0 6
with voltages in the range of above 1 kv up to and including 15 kv 23 E / 632 / C D V IEC 62335 Ed.1 Switched protective earth portable residual current devices (SPE-PRCD) for class I and battery powered vehicle applications 3 4 D / 8 7 5 / F D I S IEC 60598-2-8 A2 Ed.2 Luminaires - Part 2-8: Particular requirements - Handlamps 45 A / 653 / F D I S IEC 62385 Ed.1 Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels 62 B / 644 F / C D V CEI 62220-1-3 Ed.1 Appareils él e c t r o médicaux - CEI 62220-1-3 Ed.1: Caractéristiques des dispositifs d imagerie numérique à rayons X -Partie 1-3: Détermination de l e f f i c a c i té quantique de détection - Détecteurs utilisés en imagerie dynamique 7 6 / 3 6 2 / C D V Amendment to new Annex G on beam delivery systems IEC 60825-4 Ed.2 77 A / 575 / D T R IEC 61000-3-6 Ed.2 Electromagnetic compatibility (EMC) - Part 3-6: Assessment of harmonic emission limits for the connection of distorting installations to MV, HV and EHV power systems 77 A / 576 / D T R IEC 61000-3-7 Ed.2 Electromagnetic compatibility (EMC) - Part 3-7: Assessment of emission limits for the connection of fluctuating load installations to MV, HV and EHV power s y s t e m s 77 A / 577 / D T R IEC 61000-3-13 Ed.1 Electromagnetic compatibility (EMC) - Part 3-13: Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power s y s t e m s 8 6 A / 1 1 4 3 / D T R IEC 62469 TR Ed. 1.0 Guidance for residual stress measurement of optical fibre C I S / A / 7 3 2 / C D V CISPR 16-2-1 A2 Ed.1 Amendment of method for measurements of conducted disturbances C I S / D / 344 / C D V CISPR 25 Ed.3 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of onboard receivers 2 / 1434 / F D I S IEC 60034-8 Ed.3 Rotating electrical machines - Part 8: Terminal markings and direction of rotation 17 C / 402 / C D V IEC 62271-304 Ed.1 High voltage switchgear and controlgear - Part 304: Design classes for enclosed switchgear and controlgear from 1 kv and up to and including 52 kv to be used in severe climatic conditions 2 7 / 5 7 7 / F D I S IEC 60519-11 Ed.2 Safety in electroheat installations - Part 11: Particular requirements for _ 107
installations using the effect of electromagnetic forces on liquid metals 32 C / 406 / C D V IEC 60127-4 A1 Ed. 3.0 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types 34 C / 783 / F D I S IEC 60927 Ed.3 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance r e q u i r e m e n t s 45 B / 540 / F D I S IEC 62401 Ed.1 Radiation protection instrumentation - Alarming Personal Radiation Devices (PRD) for detection of illicit trafficking of radioactive material 56 / 1189 / F D I S IEC 62402 Ed. 1.0 Obsolescence management - Application guide 57 / 874 / C D V IEC 61970-453 Ed.1 Energy management system application program interface (EMS-API) - Part 453: CIM based graphics exchange 62 B / 649 / F D I S IEC 62220-1-2 Ed.1 MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography 72 / 739 / C D V IEC 60730-2-5 A2 Ed.3 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems 77 A / 579 / C D V Amendment 1 f7 Ed.3 to Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic IEC 61000-3-2 current emissions (equipment input current = 16 A per phase) 1 0 8
_ 109
1 1 0
_111
1 1 2
_ 113
1 1 4
_ 115
1 1 6
_ 117
1 1 8
_ 119
1 2 0
_ 121
1 2 2
M E M O
M E M O
The Monthly Technology & Standards w w w. k a t s. g o. k r