C 0.0.2 ma Cr 14.5~16.5 Co 2.5 max Iron 4~7 Mn 1 max Mo 15 ~ 17 Ni Balance P 0.03 max Si 0.08 max S 0.03 max W 3 ~ 4.5 V 0.35 max 8.89g/cm 3 Multipurpose corrosion resistance of NickelMolybdenumChrome. Application in various chemical treatment, corrosion, oxidizing enviroment for good resistance. strong acid. C 0.015 max Cr 20 ~ 22.5 Co 2.5 miniron 2 ~ 6 Mn 0.5 max Mo 12.5 ~ 14.5 Ni balance P 0.02 max Si 0.08 max S 0.02 max W 2.5 ~ 3.5 V 0.35 min 8.69g/cm 3 Alloy of NickelChromeMolybdenumTungsten. Strong resistance from stress corrosion and corrosion cracking. Suitable for multipurpose factory with endurablility in oxidized aqueous solution. Common material in chemical treatment environment where uses strong oxidizer. It is used in Gas detergent, geothermal nuclear fuel reprocessing and incinerating dust collector. Ni BAL Co.20.5 Cr. 15.5 Min 1.0 Fe 5.5 C 0.01 8.64g/cm 3 Alloy of NickelChromeMolybdenum. High ductility, corrosion resistance, stability in high temperature stress corrosion, oxidation resistance. Good endurability in variety chemical treatment environment, available forging and extruding. Avoid excessive heat treatment while welding. C 0.02 max Cr 1 max Co 1maxiron 2 max Mn 1max Mo 27~29 Ni balance P 0.04 max Si 0.1 max S 0.03 max 9.22g/cm 3 Alloy based Nickel. Endurable from hydrochloric acid, sulfuric acid, phosphoric acid. Strong resistance of damage from stress corrosion cracking, fitting, heat and cutting. Bronze is rapid corrosiveness cause of salt from hydrochloric acid. Hold vaccum in high temperature as ductilitydip at 538~870. Al 0.5 max B 0.008 max C 0.05 ~ 0.15 Cr 20.5 23 Co 0.5 ~2.5 Cu 0.5 max iron 17 ~ 20 8.22g/cm 3 High temperature strength and excellent corrosion resistance alloy Ni 76 Cr 15.5 Fe 8 8.42g/cm 3 Excellent antioxidation with including almost nickel and chrome, specially used when needs high temperature waterproofing. Heat treatment facility, electric parts, semiconductor pars, chemical and foodrelated facility, steam controller of nuclear plant. Ni 60.5 Cr 23 Fe 14 Al 1.4 8.06g/cm 3 Include nickelchrome alloy. Especially it is strong for hightemperature corrosion and oxidation. Ni 60.6 Cr 26 Fe 11 Al 2.4,,,. High chromium, aluminum, and an yttrium addition permit it to develop a tight chromium oxide scale with an alumina subscale. to minimize product contamination at extreme temperatures Ni 61 Cr 21.5 Mo 9 Nb+Ta3.6 8.44g/cm 3 It has hightensile from cryogenic degree to 980, it is excellent corrosion resistance and fatigue strength. Used in chemical and antipollution facility, nuclear reactor, marine facility and airplane parts.
Ni 60 Cr 30 Fe 9.5 8.1 9g/cm 3 Nickel alloy which consists chrome almost* excellent corrosion resistance in hightemperature atmosphere. It consists almost chrome so that it can protect from oxidation by acid. Ni 25.5 Mo 3 Cr 19 Fe 18.5 Nb+Ta 5.1 8.19g/cm 3 Precipitation hardening nickelchrome alloy* Most of metal, niobium, molybdenum, a few of aluminium and titanium. High weldability and corrosion resistance* High creep rupture strength in 700 Ni 73 Ti 2.5 Cr 15.5 Al 0.7 Fe 7Nb+ 1.0 8.28g/cm 3 Similar NickelChrome alloy with Inconel 600. Strong precipitation hardening with including Aluminium and titanium. High corrosion substance and high tensile force, creep fracture. Using high temperature spring and volt. Ni 32.5 Fe 46 Cr 21 7.95g/cm 3 Excellent high temperature strength Ni 32.5 C 0.08 Fe 46 Cr 21 Al+Ta 1.0 7.95g/cm 3 Excellent high temperature strength Ni 42 Cu 2.2 Fe 30 Cr 21.5 Mo 3 8.14g/cm 3 Excellent high temperature strength Ni 66.5 Cu 31.5 8.83g/cm 3 Excellent corrosion resistance alloy which can be application in large range with strength and weldability. Ni 65.5 Cu, 29.5 Al 2.7 Ti 0.6 8.46g/cm 3 The similar characteristics as Monel 400, it is high strength Ni 35 Mo 2.5 Fe 37 Cr 20 Cu 3.5 8g/cm 3., Corrosion resistance. Good corrosion resistance for oxidation and reducing environment, Application in Fire attack machine, environmental facility
Quality Gr 1 Gr 2 Gr 4 Gr 5 Gr 7 Gr 9 Gr 11 Gr 12 Analysis % Fe max 0.2 0.3 0.5 0.4 0.7 0.25 0.2 0.3 O max 0.18 0.25 0.4 0.2 0.25 0.15 0.18 0.25 N max 0.03 0.03 0.05 0.05 0.03 0.02 0.03 0.03 C max 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 H max 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 Pd.25.25 Al 5.56.7 2.5305 V 3.54.5 2.03.0 Mo 3.54.5 2.03.0 0.40.4 Yield strength N/mm² Tensile Strength N/mm² Rp 0.2 170310 270450 483655 828 275450 483 170310 345 Rm min 240 345 550 895 345 620 240 483 Hardness Vickers 140 170 310 330 170 250 140 170 Elongation 5 x d 24 20 15 10 20 1517 24 18
Monel Alloy 401 Monel Alloy R 405 UDIMAR Alloys 206, 300
규격파이프사이즈 Normal Pipe Size (NPS) 외곽지름 Outside Diameter 공칭두께 (Nominal Wall Thickness) Sch5s Sch10s Sch40s Sch80s Sch5 Sch10 Sch20 Sch30 STD A B MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN 8 10 15 20 ¼ 3/8 ½ ¾ 13.7 17.1 21.3 26.7 0.54 0.675 0.840 1.05 2.24 2.31 2.87 0.088 0.091 0.113 3.02 3.20 3.73 3.91 0.119 0.126 0.147 0.154 1.85 1.85 2.41 2.41 0.073 0.073 0.095 0.095 2.24 2.31 2.87 0.088 0.091 0.113 25 35 40 50 65 1 1¼ 1½ 2 2½ 33.4 42.2 48.3 60.3 73.0 1.32 1.66 1.9 2.38 2.88 3.38 3.56 3.68 3.91 5.16 0.133 0.140 0.145 0.154 0.203 4.55 4.85 5.08 5.54 7.01 0.179 0.191 0.200 0.218 0.276 3.05 2.90 2.97 3.18 3.18 0.114 0.117 0.125 0.125 3.38 3.56 3.68 3.91 5.16 0.133 0.140 0.145 0.154 0.203 80 90 100 125 150 3 3½ 4 5 6 88.9 101.6 114.3 141.3 168.3 3.5 4 4.5 5.56 6.62 0.134 0.134 5.49 5.74 6.02 6.55 7.11 0.216 0.226 0.237 0.258 0.280 7.62 8.08 8.56 10.97 0.300 0.318 0.337 0.432 3.05 3.05 3.05 3.40 3.40 0.134 0.134 5.49 5.74 6.02 6.55 7.11 0.216 0.226 0.237 0.258 0.280 200 250 300 350 400 8 10 12 14 16 219.1 273.0 323.8 355.6 406.4 8.62 10.75 12.75 14 16 3.40 3.96 3.96 0.134 0.156 0.156 0.165 3.40 3.96 3.96 0.148 0.165 0.180 8.18 9.27 0.322 0.365 3.40 3.96 3.96 0.134 0.156 0.156 0.165 3.76 4.57 0.148 0.165 0.180 7.04 7.80 8.38 0.277 0.307 0.330 8.18 9.27 0.322 0.365 450 500 550 600 650 18 20 22 24 26 457 508 559 610 660 18 20 22 24 26 5.54 0.165 0.218 5.54 0.218 0.218 5.54 0.165 0.218 11.13 14.27 0.438 0.562 700 750 800 850 900 950 28 30 32 34 36 38 711 762 813 864 914 965 28 30 32 34 36 38 0.25 0 15.88 15.88 15.88 15.88 15.88 0.625 0.625 0.625 0.625 0.625 1000 1050 1100 1150 1200 40 42 44 46 48 1016 1067 1118 1168 1219 40 42 44 46 48
35Jungangdaer o, Junggu, Busan, Repi bl i cofkor ea