Shield Form Gasket (P/N: UKB10-LS10-190-5, UKB6-LN6-200-5, UKU13-3-150-8, URB10-R5-200-D, URB5-1.5-200-4, URB8-4-180-4, URB9-1-200-D, URU10-3-150-8) 1 Shield form gasket ( 주 ) 뉴티씨 ( NewTC ) 1-1 Description 쉴드폼가스켓은탄성체주위를전기전도성섬유로감싼차폐용부품으로서전자장비내부의이음매또는틈새에적용되는효과적인차폐용부품입니다. 저렴한가격, 다양한형태로고객사양에맞춰적용시킬수있습니다. 고객이요구하는대부분의차폐, 접지, ESD 등의문제를해결할수있으며이것은디자인설계를위한비용절감에탁월한효과를볼수있습니다. 1-2 Characteristics Shielding Effective : min. 60dB Surface resistivity : max. 0.08Ω/m Operating temperature range : max 105 Note 1. Surface Resistance : Max. 0.1Ω/sq 1 / 7
NO Material Name Specification Material Remark 1) Elastomer Density : 45±3Kg/ m3 2) Conductive Fabric Thickness : 0.1 mm (Typical Value) 3) Conductive Adhesive Tape Adhesive Strength : Min. 1,500gf/25mm Polyurethane Sponge Ni-PET platin CP Paper Color : White/Yellow P/N : M2-Rip CNRF P/N : KT- 4112D DATE Scale Unit General Tolerance 2009.6.15 N/S mm Designed by Reviewed by Approved by Title Pate No. Shield form gasket URU-X-Y-Z-X' Drawing No. 2 Conductive Fabric (P/N : M2Rip-CNRF) 2-1 Material & Construction (Woven type) The Conductive Fabric is coated Nickel and Copper over Polyester Fabrics. The base layer is the highly conductive copper, with an outer layer of nickel for corrosion resistance. Nickel/Copper coated Polyester Fabrics offer excellent surface conductivity, shielding effectiveness, and corrosion resistance for a variety of application. The Conductive Fabric is recommended to obtain high EMI shielding at frequency range from 500KHz to 10GHz. 2 / 7
2-2 Characteristics Item Unit Spec. Reference Width mm 1000 Thickness mm 0.13 Surface Resistivity Ω m 0.08 One side insulation Tensile Strength kgf 50/55 ASTM D 5034 (Grab Method) Elongation % 27.6/30.8 ASTM D 5034 (Grab Method) Tear Strength gf 1108/503 ASTM D 1424 (Pendulum Method) Flammability 94VTM-0 UL (E206305) Conductive Foam Conductive Foam Appearance 3 / 7
3 Polyurethane Foam 3-1 Material & Characteristics Item Unit Spec. Test Method Material - Polyurethane Foam Hard Elastomer Density kg/m3 45±5 KS M 6672 Tensile Strength kg/cm2 Min. 2.0 KS M 6579 Elongation at break % Min. 80 KS M 6579 Tear Strength kg/ cm Min. 0.4 ASTM D 1564 Compression Set(%) % Max.6 KS M 6672 Color White / Yellow 4 Conductive Adhesive Tape (P/N : KT-4112D) 4-1 Material & Characteristics Item Class Reference 1 Base Material Conductive Fabric D.T.Y 2 Adhesive Conductive Adhesive - 3 Release Paper CP Paper 90 g/sq, Double Side PE, One Side Release Treated Total Thickness 0.12 (±0.02) mm 4-2 Conductive Adhesive Resin Composition The Prineipal ingreient : Acrylic ester polyol copolymer Modified chemical material : modified nickel & carbon pigment 4 / 7
4-3 Characteristic Item Unit Spec. Reference Adhesive power(180 peel) gf/25mm Min. 1500 PET Film (25μm) / SUS 304 Plate Holding Power sec more than 3,600 PET Film (25μm), 40, 500 g Ball Tack Ball No. 7±1 J. DOW Method Electric Resistivity Ω/25mm² less than 0.5 at 25, 50% R.H. Temp Range -30 ~ 105 <SHIELD FORM: URU10-3-150-8> <SHIELD FORM_URB10-R5-200-D> <SHIELD FORM_URB9-1-200-D> 5 / 7
<SHIELD FORM_URB8-4-180-4> <SHIELD FORM_URB5-1.5-200-4> <SHIELD FORM_UKU13-3-150-8> <SHIELD FORM_UKB10-LS10-190-5> <SHIELD FORM_UKB6-LN6-200-5> 6 / 7
뉴티씨 (NEWTC) 에서판매하는품목 품명 구분 규격 길이 ( mm ) 수량 용도 TAFETA 비난연 UKB10-LS10-190-5 190 5 전계용 TAFETA 비난연 UKB6-LN6-200-5 200 5 전계용 TAFETA 난연 UKU13-3-150-8 150 5 전계용 SHIELD FORM RIP 비난연 URB10-R5-200-D 200 5 전계용 RIP 비난연 URB5-1.5-200-4 200 5 전계용 RIP 비난연 URB8-4-180-4 180 5 전계용 RIP 비난연 URB9-1-200-D 200 5 전계용 RIP 난연 URU10-3-150-8 150 5 전계용 TAPE ALRUMINUM COPPER C/FABRIC C/FABRIC(M) INSULATIOR 가공 UK-100-50-100 10 전계용 롤 UK-100-20 50 1 전계용 가공 UK-101-50-100 10 전계용 롤 UK-101-20 25 1 전계용 가공 UK-102-50-100 10 전계용 롤 UK-102-20 50 1 전계용 가공 UK-106-50-100 10 전, 자계용 롤 UK-106-20 50 1 전, 자계용 가공 UK-300-50-100 10 절연용 롤 UK-300-20 50 1 절연용 가공 UK-300-210-300 2 절연용 SHIELD CUSHION 시트 UCC-1.3-100-200 1 전계용 ABSORBER 시트 USOB-1.0-V2-A4 1 전계용 THERMAL SHEET 시트 UTH-220-220-1T 1 열전용 7 / 7