V5000-1.xx-IG-KO-020424
... 1...1...1...1 1... 3 1.1...3 1.2...4 2... 6 2.1...6 2.2 Ezsetup...8 2.2.1... 8 2.2.2 IP Default Gateway... 10 2.2.3... 13 2.3...15 2.3.1... 15 2.3.2 Ezsetup... 16 2.3.1 ( )... 17 2.3.2 ( )... 18 2.3.3 ( )... 18 2.3.4 IP... 19 2.3.5 ( )... 19 3.3.6 ( )... 20 2.3.7 ( )... 20 2.3.8 ( )... 21 2.3.9... 22 2.3.10... 22 3... 23 3.1 TFTP...23 3.1.1 TFTP... 23 3.1.2 TFTP... 26 3.1.3... 29 3.1.4 Boot... 29 3.2 FTP...32
4... 36 4.1...36 4.2...37 4.3...38 4.4...39 4.5 VLAN...40 4.5.1 VLAN... 40 4.5.2 VLAN... 41 4.6...42 4.6.1... 42 4.6.2... 42 4.6.3... 43 4.6.4... 44 4.6.5... 44 4.6.6 IP aliasing... 45 4.6.7... 46 4.6.8... 48 4.7...48 5 Web Manager... 50 5.1...50 5.2...51 5.3...53 5.3.1... 53 5.3.2... 54 5.3.3... 55 5.4 VLAN...56 5.4.1 VLAN... 56 5.4.2 VLAN... 57 5.5...58 5.5.1... 59 5.5.2... 60 5.5.3... 60
*********************************************************** * * * Vertex Boot Loader Version 1.55 (50) * * DASAN Co., Ltd. * * * *********************************************************** Loading... Load Address: 0x00200000 Image Size: 0x0039392e Start Address: 0x00200000 ( ) Flash Memory Size : 8 MB(MXIC MX29F016) RAM disk driver initialized: 16 RAM disks of 8192K size loop: registered device at major 7 NET4: Ethernet Bridge 005 for NET4.0 eth0: CPM ENET Version 0.2, 00:d0:cb:06:88:cb RAMDISK: Compressed image found at block 0... EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended e2compr 0.4.34 (1999-08-13) loading. VFS: Mounted root (ext2 filesystem). Dasan Switch : 4 NP(s) 16 port(s) ini BRIDGE: Enable Spanning Tree function INIT: version 2.77 booing Notice: Flash Saved Configurations are restored successfully hostname: vertex INIT: Entering runleve?3 Enabling IPv4 packet forwarding. Starting system loggers: syslogd Terminated Starting INET services: inetd Starting httpd: httpd Starting snmpd: snmpd login:
login: root Password: Password: vertex25 vertex# vertex# ezsetup Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : vertex#: ezsetup
Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : 1 Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 1 Hostname for the system :
Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 1 Hostname for the system : dasan Switch Configuration - IP Configuration 1. Hostname dasan 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : 1 Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want :
Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 2 IP Address for this system : Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 1.1.1.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 2 IP Address for this system : 192.168.10.1 Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want :
Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 3 Mask in subnet field : Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.255.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 3 Mask in subnet field : 255.255.0.0 Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.0.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want :
Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.0.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 4 Default gateway IP address : Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.0.0 4. Default Gateway 1.1.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 4 Default gateway IP address : 192.168.1.254 Switch Configuration - IP Configuration 1. Hostname vertex 2. IP Address 192.168.10.1 3. Subnetmask 255.255.0.0 4. Default Gateway 192.168.1.254 9. Exit ---------------------------------------------- Enter the entry number you want :
Switch Configuration - IP Configuration 1. Hostname dasan 2. IP Address 192.168.10.1 3. Subnetmask 255.255.0.0 4. Default Gateway 192.168.1.254 9. Exit ---------------------------------------------- Enter the entry number you want : 9 Use this configuration? [Y/n] y Saving configuration!!! Disabling IPv4 packet forwarding. Enabling IPv4 packet forwarding. Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : 9 Save configuration to flash memory?(y/n): y Saving configuration!!! Configurations are saved into Flash sucessfully Program Exit~~~ vertex#
Switch Configuration 1. IP Configuration 2. Server Load Balancing 9. Exit --------------------------------------------- Enter the entry number you want : 2
Switch Configuration - Server Load Balancing Load balancing service port : ------------------------------------------------------------------------- NUM Protocol Virtual IP Protocol port Mode ------------------------------------------------------------------------- ------------------------------------------------------------------------- 1. Add Service port 2. Delete Service port 3. Create Virtual Server 4. Delete Virtual Server 5. Modify/Show Virtual Server 9. Exit ------------------------------------------------------------------------- Enter the entry number you want : Switch Configuration 1. IP Configuration 2. Load Balancing 9. Exit ------------------------------------------- Enter the entry number you want: 2 ( )
Switch Configuration Server Load Balancing Load balancing service port : 1 NUM Protocol Virtual IP Protocol Port [1] TCP 1.1.1.1 80 Normal Mode 1.Add Service Port 2.Delete Service Port 3.Create Virtual Server 4.Delete Virtual Server 5.Modify/Show Virtual Server 9.Exit ------------------------------------------- Enter the entry number you want: 1 Service ports on this system: 1, 2 Switch Configuration Server Load Balancing Load balancing service port : 1 NUM Protocol Virtual IP Port Mode [1] TCP 1.1.1.1 80 Normal 1.Add Service Port 2.Delete Service Port 3.Create Virtual Server 4.Delete Virtual Server 5.Modify/Show Virtual Server 9.Exit ------------------------------------------- Enter the entry number you want: 2 Service port to be deleted on this system (e.g 1): 1
Switch Configuration Server Load Balancing Virtual Server Configuration 1. Virtual IP address 0.0.0.0 2. Protocol (eg TCP) TCP 3. Port 0 4. Real IP address 0.0.0.0 5. Mode Normal 9. Exit ------------------------------------------------- Enter the entry number you want: 1 Enter Virtual Server IP address: 1.1.1.10 Switch Configuration Server Load Balancing (SLB) Virtual Server Configuration 1. Virtual IP address 1.1.1.10 2. Protocol (eg TCP) TCP 3. Port 0 4. Real IP address 0.0.0.0 5. Mode Normal 9. Exit ------------------------------------------------- Enter the entry number you want: 2 Protocol for use by server load balancing [TCP/UDP]: TCP
Switch Configuration Server Load Balancing (SLB) Virtual Server Configuration 1. Virtual IP address 1.1.1.10 2. Protocol (eg TCP) TCP 3. Port 0 4. Real IP address 0.0.0.0 5. Mode Normal 9. Exit ------------------------------------------------- Enter the entry number you want: 3 Port number for the TCP or UDP connections (eg 80): 80
Switch Configuration Server Load Balancing (SLB) Virtual Server Configuration 1. Virtual IP address 1.1.1.10 2. Protocol (eg TCP) TCP 3. Port 80 4. Real IP address 0.0.0.0 5. Mode Normal 9. Exit ------------------------------------------------- Enter the entry number you want: 4 Configure a r Real server IP (1.Add 2.Delete)?: 1 Real Server IP addresses Input Real IP to add: 1.1.1.11, 1.1.1.12, 1.1.1.13 Switch Configuration Server Load Balancing (SLB) Virtual Server Configuration 1. Virtual IP address 1.1.1.10 2. Protocol (eg TCP) TCP 3. Port 80 4. Real IP address 1.1.1.11, 1.1.1.12, 1.1.1.13 5. Mode Normal 9. Exit ------------------------------------------------- Enter the entry number you want: 5 1. Normal 2. IP persistent connections 3. User close mode Enter the appropriate mode type on your switch: 1
Service port : 1 Switch Configuration Server Load Balancing NUM Protocol Virtual IP Port Mode [1] TCP 1.1.1.1 80 Normal 1.Add Service Port 2.Delete Service Port 3.Create Virtual Server 4.Delete Virtual Server 5.Modify/Show Virtual Server 9.Exit ------------------------------------------- Enter the entry number you want: 4 Do you want to delete the virtual server [y/n]?: y Enter the virtual server to delete (e.g 1): 1 y Enter.. Switch Configuration Server Load Balancing (SLB) Virtual Server Configuration 1. Virtual IP address 1.1.1.1.10 2. Protocol (eg TCP) TCP 3. Port 80 4. Real IP address 1.1.1.11, 1.1.1.12, 1.1.1.13 5. Mode normal 9. Exit ------------------------------------------------- Use this configuration? [y/n]: y Saving the configuration!!
C:\WINDOWS>cd.. C:\> C:\>md tftpd C:\>cd tftpd C:\tftpd> C:\tftpd>ftp ftp.da-san.com ( 203.236.124.253) Connected to 203.236.124.253. 220 ProFTPD 1.2.0pre8 Server (ProFTPD ALZZA Default Installation) [firewall.dasan.com] User (203.236.124.253:(none)): User (203.236.124.253:(none)): anonymous 331 Anonymous login ok, send your complete e-mail address as password. Password: Password:anonymous@da-san.com 230 Anonymous access granted, restrictions apply. ftp>
ftp> dir 200 PORT command successful. 150 Opening ASCII mode data connection for file list. drwxr-xr-x 2 root root 4096 Jun 28 17:44 ACCESS-ALL drwxr-xr-x 4 ftp ftp 4096 Jun 29 20:51 ACCESS-SDSL ( ) -rw-r--r-- 1 506 users 51867 Jun 25 12:05 tftpd32.zip 226 Transfer complete. ftp: 1672 bytes received in 0.24Seconds 6.97Kbytes/sec. ftp> ftp> bin 200 Type set to I. ftp> ftp> get tftpd32.zip 200 PORT command successful. 150 Opening BINARY mode data connection for tftpd32.zip (51867 bytes). ######################### 226 Transfer complete. ftp: 51867 bytes received in 0.08Seconds 648.34Kbytes/sec. ftp>
ftp> quit 221 Goodbye. C:\tftpd> C:\WINDOWS>cd.. C:>cd tftpd C:\tftpd> 192.168.1.218
C:\tftpd>ftp ftp.da-san.com ( 203.236.124.253) Connected to 203.236.124.253. 220 ProFTPD 1.2.0pre8 Server (ProFTPD ALZZA Default Installation) [firewall.dasan.com] User (203.236.124.253:(none)): User (203.236.124.253:(none)): anonymous 331 Anonymous login ok, send your complete e-mail address as password. Password: Password:E-mail address 230 Anonymous access granted, restrictions apply. ftp> ftp>ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. drwxr-xr-x 2 root root 4096 Jun 28 17:44 ACCESS-ALL drwxr-xr-x 4 ftp ftp 4096 Jun 29 20:51 ACCESS-SDSL drwxrwxr-x 3 root root 4096 Jun 29 20:53 ACCESS-VDSL drwxrwxr-x 2 root root 4096 Jun 29 20:01 V1000 drwxr-xr-x 25 root root 4096 Jun 21 11:27 V5000 ( ) 226 Transfer complete.
ftp>cd V5000 250 CWD command successful. ftp> ftp> dir ftp> bin 200 Type set to I. ftp> ftp> hash Hash mark printing On ftp: (2048 bytes/hash mark). ftp> ftp> get V5000.1.xx.x 200 PORT command successful. 150 Opening BINARY mode data connection for V1008.2.97k2.x (3278012 bytes). #################################################################### #################################################################### #################################################################### ( ) 226 Transfer complete. ftp: 3278012 bytes received in 1.08Seconds 3032.39Kbytes/sec. ftp>
ftp> quit 221 Goodbye. C:\tftpd> *********************************************************** * * * Boot Loader Version 3.01 * * DASAN Co., Ltd. * * * *********************************************************** If you want to go to boot mode, press <s> key.. Boot> Boot>ip 192.168.1.10 Boot>
Boot> save Saving Environment to EEPROM... Boot> reboot *********************************************************** * * * Boot Loader Version 3.01 * * DASAN Co., Ltd. * * * *********************************************************** If you want to go to boot mode, press <s> key.. Boot> Boot> show ip IP = 192.168.1.10 EtherAddr 0 = 00:d0:cb:0a:30:23 Boot> Boot> load prog 192.168.1.10 v5000.1.xx.x.vlsos Loading v5000.1.xx.x.vlsos from 203.236.124.209... Download completed: 3750206 (0x39393e) Bytes. Update flash: Are you sure (Y/n)? y Erasing : 0x80000000-0x80020000 Erasing : 0x80020000-0x80040000 ( ) Programming : 0x80000000-0x80020000 Programming : 0x80020000-0x80040000 ( ) Verifying : 0x80000000-0x80020000 Verifying : 0x80020000-0x80040000 ( ) Completed. Boot>
Boot> exit loaded at: 00200000 0020B1D8 board data at: 002002B4 002002DC relocated to: 002002B4 002002DC zimage at: 0020B1D8 0027902A initrd at: 0027902A 005204AB avail ram: 00521000 01000000 Switch OS Version : 1. xx #646.Calibrating delay loop... 49.66 BogoMIPS Memory: 12328k available (836k kernel code, 472k data, 28k init) Flash Memory Size : 4 MB(INTEL IN28F320J3) INIT: version 2.77 boo?g Extracting configuration Tue Nov 30 00:00:18 1999 SWITCH startup complet? INIT: Entering runleve?3 SWITCH login: 192.168.1.218
*********************************************************** * * * Boot Loader Version 3.01 * * DASAN Co., Ltd. * * * *********************************************************** If you want to go to boot mode, press <s> key.. loaded at: 00200000 0020B1D8 board data at: 002002B4 002002DC relocated to: 002002B4 002002DC zimage at: 0020B1D8 0027902A initrd at: 0027902A 005204AB avail ram: 00521000 01000000 Switch OS Version : 1.xx #646.Calibrating delay loop... 49.66 BogoMIPS Memory: 12328k available (836k kernel code, 472k data, 28k init) Flash Memory Size : 4 MB(INTEL IN28F320J3) INIT: version 2.77 boo?g Extracting configuration Tue Nov 30 00:00:18 1999 SWITCH startup complet? INIT: Entering runleve?3 SWITCH login:
SWITCH login: root Password:vertex25 SWITCH# SWITCH# configure terminal SWITCH(config)# interface br1 SWITCH(config-if)# SWITCH(config-if)# ip address 192.168.1.10/24 SWITCH(config-if)# SWITCH(config-if)# show ip Address: 192.168.1.10 Netmask: 255.255.255.0 Broadcast: 192.168.1.255 SWITCH(config-if)# SWITCH# ftp 192.168.1.218 Connected to 192.168.1.218. 220 3Com 3CDaemon FTP Server Version 2.0 Name (203.236.124.209:root):
Name (203.236.124.209:root): anonymous 331 User name ok, need password Password : E-mail address 230 User logged in Remote system type is UNIX. Using binary mode to transfer files. ftp> ftp> dir 200 PORT command successful. 150 File status OK ; about to open data connection drwxrwxrwx 1 owner group drwxrwxrwx 1 owner group 0 0 Nov 27 10:39. Nov 27 10:39.. -rwxrwxrwx 1 owner group 3836 Nov 27 10:38 VENDINFO.DIZ -rwxrwxrwx 1 owner group 57344 Nov 27 10:38 tftpd32.exe -rwxrwxrwx 1 owner group 32891 Nov 27 10:38 TFTPD32.HLP -rwxrwxrwx 1 owner group 251 Nov 27 10:38 file_id.diz -rwxrwxrwx 1 owner group -rwxrwxrwx 1 owner group 4353012 Nov 27 10:43 V5000.1.xx.x -rwxrwxrwx 1 owner group -rwxrwxrwx 1 owner group 2853562 Dec 05 11:05 v1024.v2.0.0 3278012 Dec 10 17:02 V1008.2.97k2.x 226 Closing data connection ftp> 51867 Dec 11 16:55 tftpd32.zip ftp> bin 200 Type set to I. ftp> ftp> hash Hash mark printing on (1024 bytes/hash mark). ftp>
ftp> get V5000.1.xx.x /dev/boot local: /dev/boot remote: V5000.1.xx.x 200 PORT command successful. 150 File status OK ; about to open data connection ################################################################################ ################################################################################ ################################################################################ ########## 226 Closing data connection; File transfer successful. 3278012 bytes received in 22 secs (3204 bytes/sec) ftp> quit SWITCH#
# sconfig port 1 enable auto on # sconfig port 2 speed 100 duplex full V5000 mirrored-to. mirrored-to. mirrored mirrored-to.. Step 1. #sconfig mirror monitor add port #sconfig mirror monitor add 1 Step 2 #sconfig mirror add port # sconfig mirror add 2, 5, 10 # sconfig mirror show
# sconfig mirror show Monitor port: 1 Mirrored port: 2, 5, 10 ->. # # sconfig mirror monitor del port # sconfig mirror monitor del 1 # sconfig mirror del port # sconfig mirror show Monitor port: 2 Mirrored port: 3, 9 -> # Step 5 # save_config,.
# sconfig port show # sconfig port 1 show 01 ON ENABLED 100Mb FULL AutoNegotiate # sconfig port 1,2,3 show 01 ON ENABLED 100Mb FULL AutoNegotiate 02 ON ENABLED 10Mb HALF AutoNegotiate 03 OFF DISABLED 10Mb HALF AutoNegotiate # sconfig port 8-10 show 08 OFF DISABLED 10Mb HALF AutoNegotiate 09 ON ENABLED 100Mb FULL AutoNegotiate 10 ON ENABLED 100Mb FULL AutoNegotiate # sconfig port 11,13-15,21 show 11 ON ENABLED 10Mb HALF AutoNegotiate 13 ON ENABLED 100Mb FULL AutoNegotiate 14 OFF DISABLED 10Mb HALF AutoNegotiate 15 OFF DISABLED 10Mb HALF AutoNegotiate 21 ON ENABLED 100Mb FULL AutoNegotiate # sconfig pifstats port show
# sconfig pifstats 1 show Port 01 msc 0x00 msc port 0x0f epif chnl 3 state 05 Rx Total Bytes <=64 65-127 128-255 256-511 512-1023 1024-1518 088927635 000048146 000041895 000025588 000009097 000011250 000045047 good_ovsz error_ovsz good_undsz error_undsz 000000000 000000000 000000000 000000241 ucast_fr_in mcast_fr_in bcast_fr_in 000173523 000000665 000006835 rx_align_errs rx_fcs_errors overrun 000000118 000000123 000000000 TX Total Bytes <=64 65-127 128-255 256-511 512-1023 1024-1518 000069233 000000507 000000215 000000009 000000005 000000022 000000000 ucast_fr_out mcast_fr_out bcast_fr_out 000000755 000000000 000000003 tx_fcs_errors tx_ovsz_errors tx_undsz_errors 000000000 000000000 000000000 one_coll multi_coll excess_coll 000000001 000000005 000000000 S_RX: total_frames total_cells fcs_errors hs_errors length 000037631 000077150 000000000 000000000 000000000 S_TX: total_frames total_cells 000038066 000099453 STTS: rx_mac tx_mac rx_slicer tx_slicer 000262208 000262208 002097156 006291456 VLAN. VLAN VLAN VLAN. VLANVLAN. VLAN. VLAN. VLAN IP.
Step 1 # sconfig vlan add vlan port # sconfig vlan add test 1-8 Step 2 Step 3 DEVICE=eth1 IPADDR=192.192.192.2 NETMASK=255.255.255.0 NETWORK=192.192.192.0 BROADCAST=192.192.192.255 ONBOOT=no sconfig vlan del vlan port # sconfig vlan del test 1-8
ipvsadm -E -a port # ipvsadm -E -a 1
ipvsadm -A -t ip_address:port -s wrr # ipvsadm -A -t 100.100.1.1:80 -s wrr # ipvsadm -A -t 200.100.1.1:80 -s wrr ipvsadm -D -t ip_address:port # ipvsadm -D -t 100.100.1.1:80 ipvsadm C
ipvsadm -a -t service_address:port_number -r server_address -w weight [-p -c -pc] # ipvsadm -a -t 203.236.124.241:80 -r 203.236.124.124 -w 1 (server A) # ipvsadm -a -t 203.236.124.241:80 -r 203.236.124.126 -w 3 (server B) ipvsadm L/l
# ipvsadm L Service Port: 1 tcp 100.100.1.1:80 0 wrr normal 0 udp 200.100.1.1:80 0 wrr ip_persistent 0 #. server farm IP. aliase. Solaris, Window NT, Linux. Solaris. ifconfig lo0 : 1 virtual_address destination_address up ifconfig lo0 : 0 virtual_address netmask netmask up Step 1 Step 2 Step 3 Step 4
Step 1 Step 2 Step 3 Step 1 netstat rn Step 2
Active Routes NETWORK ADDRESS NETMASK GATEWAY ADDRESS METRIC 0.0.0.0 0.0.0.0 9.67.128.1 9.67.133.67 1 9.0.0.0 255.0.0.0 9.67.133.158 9.67.133.158 1 9.67.128.0 255.255.248.0 9.67.133.67 9.67.133.67 1 9.67.133.67 255.255.255.255 127.0.0.1 127.0.0.1 1 9.67.133.158 255.255.255.255 127.0.0.1 127.0.0.1 1 9.255.255.255 255.255.255.255 9.67.133.67 9.67.133.67 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 224.0.0.0 9.67.133.158 9.67.133.158 1 224.0.0.0 224.0.0.0 9.67.133.67 9.67.133.67 1 255.255.255.255 255.255.255.255 9.67.133.67 9.67.133.67 1 Step 3 Well-Known Multicast Network Address 224.0.0.0 224.0.0.0 9.67.133.158 9.67.133.158 1 Automatically Installed Default Route 9.0.0.0 255.0.0.0 9.67.133.158 9.67.133.158 1 Step 4 route delete -net network_address virtual_address route delete -net 9.0.0.0 9.67.133.158 route delete network_address virtual_address
route delete 9.0.0.0 9.67.133.158 bash# cat rc.local #!/bin/sh # This script will be executed *after* all the other init scripts. # You can put your own initialization stuff in here if you don't # want to do the full Sys V style init stuff. sconfig port 01 enable auto on sconfig port 02 speed 100 duplex full sconfig vlan add vlan2 tag 2 9-16 sconfig vlan add vlan3 tag 3 17-24 sconfig vlan add vlan4 tag 4 25-32 ifconfig eth1 203.236.124.238 up ifconfig eth2 192.192.2.1 up ifconfig eth4 192.192.1.1 up ifconfig eth4:1 192.192.192.80 up ipvsadm -E -a 1 ipvsadm -A -t 192.192.192.80:100 s wrr ipvsadm -a -t 192.192.192.80:100 -r 203.236.124.124 -w 1 ipvsadm -a -t 192.192.192.80:100 -r 203.236.124.126 -w 3 bash# V5000 (configuration)..
. Step 1 passwd. Step 2.. 5 8.. #passwd New password : New password (again) : Password changed passwd : all authentication tokens updated successfully #
Step 1 Step 2 http://230.236.124.203 Step 3 Step 4
top Port..
VLAN. VLAN VLAN VLAN. VLAN. VLAN VLAN.. VLAN VLAN.