PARTS BOOK KM-250AU-7S KM-250A-7S KM-250B-7S KM-250BH-7S KM-250BL-7S KM-250AU KM-250B KM-250BL KM-250AU-7N KM-250A-7N KM-250B-7N KM-250BH-7N KM-250BL-7N KM-250A KM-250BH For 1- Needle, Straight Lock-Stitch Machine Series SunStar CO., LTD. PME-131022
Information A. Parts Book 구성 Structure of Part Book 1 2 3 4 5 6 7 8 9 1: 관계별고유코드 Unique code by mechanism 2: 관계별고유명칭 Unique name by mechanism 3: 관계도 Explode view 4Ref.No: 파트별고유식별번호 Unique identification number by part 5Parts No.: 고유제품코드 Unique Product code Ex) 구분 Code Category 구부품 Old part 01-030C-1230 신부품 New Part AS-000000-00 GP-000000-00 EP-000000-00 6Note: 공지사항표기및메모 Refers to notice and memo 7품명 : 파트의고유품명 Name of Part:Unique name of parts 8Q ty : 파트의수량 The number of parts 9Assembly no.: 조 ( 조 ) 파트의식별번호 Unique identification number by set part 비고 remarks 조 ( 조 ) 파트 Set parts 기구적파트 Instrumental parts 전기적파트 Electrical parts
Warning 1. 조에속한파트는개별조립시제품의파손또는재봉불량이발생될수있어해당파트에대한주문시에는조품목으로만구입이가능합니다. 2. 본책자는 Parts Book으로제작되었으므로매뉴얼로사용불가합니다. 3. 사전예고없이사양이변경될수도있습니다. 1. The parts classified as ass y items may cause damage to the machine or bad sewing when they are separately assembled. Hence, when they are ordered, they can be purchased as ass y items only. 2. This is a parts book. It cannot be used as a manual. 3. Parts are Subject to change in Design Without Prior Notice. Note ㆍ썬스타제품의부품은아래인터넷주소로접속하시어신청할수있습니다. http://www.sunstarcs.com ㆍ가입된회원께서는썬스타포탈사이트에로그인후필요한부품을신청할수있습니다. ㆍ부품관리-발주관리-발주등록항목에서부품번호와신청수량을입력하여등록하시면발주가됩니다. ㆍ부품번호를모르시는경우파츠북조회를클릭하시고사용하는기종을검색하여선택하시면해당기종의파츠북을조회할수있습니다. ㆍ파츠북은관계별로구분되어있으며관계를알고있다면부품찾기가용이합니다. ㆍYou can make an order for the parts of Sunstar machine to connect internet address. http://www.sunstarcs.com ㆍYou can request for parts you want after login if you are a registered member. ㆍIn parts Management - Order Management - Order Registration entry, you can place an order by entering the part number and quantity. ㆍIf you don t know the parts number, click the parts book menu bar. In a download list, you can read parts book by searching model you use. ㆍThis parts book is classified by the mechanism, therefore you can find part easily.
MODEL FOR NEW MATERIAL AND EXTREME THIN MATERIAL KM-250AU-7S 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY SERVO MOTOR KM-250AU-7N 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY NEEDLE POSITIONING MOTOR KM-250AU 1-NEEDLE, STRAIGHR LOCK-STITCH MACHINE FOR THIN MATERIAL KM-250A-7S 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY SERVO MOTOR KM-250A-7N 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY NEEDLE POSITIONING MOTOR KM-250A 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE FOR THICK MATERIAL KM-250B-7S 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY SERVO MOTOR KM-250B-7N 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY NEEDLE POSITIONING MOTOR KM-250B 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE FOR HEAVY MATERIAL KM-250BH-7S 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY SERVO MOTOR KM-250BH-7N 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY NEEDLE POSITIONING MOTOR KM-250BH 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE FOR HEAVY MATERIAL KM-250BL-7S 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY SERVO MOTOR & LARGE HOOK KM-250BL-7N 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH THREAD TRIMMER DRIVEN BY NEEDLE POSITIONING MOTOR & LARGE HOOK KM-250BL 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH LARGE HOOK
CONTENTS 목차 A Machine Body & Thread Tension Adjusting Mechanism 6 외장및실장력조절관계 B Upper Shaft & Needle Bar Mechanism 10 상축 & 바늘대관계 C Upright Shaft & Lower Shaft Mechanism 12 세운축및하축관계 D Feed Mechanism 14 피이드관계 E Thread Trimmer Mechanism 사절관계 20 F Presser Foot & Tension Release Mechanism 노루발및실늦추기관계 24 G Thread Wiper Mechanism 26 와이퍼관계 H Reverse Button Mechanism 28 역진보턴관계 I Lubrication Mechanism 30 급유관계 J Accessories Mechanism 32 액세서리관계 K Program Unit Box & Auto Presser Lifting Solenoid Mechanism(Option Parts: SPF-5) 프로그램유니트박스및자동무릎올림관계 36 L Special Parts For KM-250AU Series Mechanism KM-250AU 시리즈전용부품관계 38 M Special Parts For (KM-250AU-7N, KM-250A-7N, KM-250B-7N) Mechanism [KM-250AU-7N, KM-250A-7N, KM-250B-7N] 전용부품관계 N Special Parts For KM-250BH Series Mechanism 42 KM-250BH 시리즈전용부품관계 O Special Parts For KM-250BL Series Mechanism KM-250BL 시리즈전용부품관계 P Special Parts For KM-250BL Series Mechanism 46 KM-250BL 시리즈전용부품관계 40 44 Index 인덱스 48
A Machine Body & Thread Tension Adjusting Mechanism 외장 & 실장력조절관계 6
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period A-1 01-001A-250A A Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set A-2 01-001A-250B B Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set A-3 01-001A-257A A-7 Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set A-4 01-001A-257B B-7 Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set A-4-1 01-001A-25BL Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set Apr. 05. 11 A-4-2 01-001A-2BLS Arm. Bed Ass y 아암. 베드 ( 조 ) 1Set A-5 CMB-LA004200 Face Plate 면판 1 A-6 CMB-FC002300 Gasket 면판가스켓 1 A-7 DSC-BF008400 Screw(3/16 n=28) 무릎올림링크고정나사 (3/16 n=28) 3 A-8 CMB-LA004300 Thread Take Up Cover 실채기커버 1 A-9 DSC-BF000600 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 1 A-10 DPK-CB000900 Face Plate Rubber Cap(L) 면판고무마개 ( 大 ) 흰색 (3-1) 1 A-11 DPK-CB000200 Face Plate Rubber Cap(S) 면판고무마개 ( 中 ) 흰색 (3) 1 A-12 01-140C-2500 Back Cover 뒷뚜껑 (STD) 1 A-13 CMB-FC002400 Gasket 뒷뚜껑가스켓 (ST) 1 A-13-1 01-142M-2500 Gasket 뒷뚜껑가스켓 (AK) 1 A-14 DSC-BF000600 A,B Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 8 A-14-1 DSC-BF008400 A-7,B-7 Screw(3/16 n=28) 무릎올림링크고정나사 3 A-14-2 DSC-BF000600 A-7,B-7 Screw(3/16 n=28) 다이알판죔나사 5 A-14-3 DSC-BA001800 A-7,B-7 Screw(9/64 n=40) 톱카바나사 ( 좌 ) 1 A-14-4 DWS-AA003800 A-7,B-7 Washer 상축휄트와셔 1 A-15 DPK-CB000200 Arm Rubber Cap(L) 면판고무마개 ( 中 ) 흰색 (3) 2 A-16 DPK-CB000400 Arm Rubber Cap(S) 고무마개 ( 소 ) 2 A-17 DPK-CB002300 A-7,B-7 Rubber Cap 바늘대상붓싱마개 1 Mar.25.09 A-18 DPK-CA000600 Bed Rubber Cap 하축후붓싱고무마개 1 A-19 DPK-CC000300 Code Bushing 코드붓싱 1 A-20 DSC-HC000300 Bed Base FRONT (A-TYPE) 베드받침 ( 전 ) 1 A-21 CMB-BB004500 Bed Base(R) 베드받침 1 A-22 PSC-AC002600 Screw(M8 1.25) 베드받침후결합볼트 (M8 1.25) 1 A-23 PWS-CA000400 Spring Washer 베드받침스프링와셔 2 A-24 PSN-AA000500 A-7,B-7 Nut(M8 1.25) 베드받침너트 (M8 1.25) 1 A-26 DTC-AH000200 A-7,B-7 Code Holder A 코드잡이 A 1 A-27 DTC-AH001100 A-7,B-7 Code Holder B 코드잡이 B 1 A-28 PTC-AH000200 A-7,B-7 Code Holder(7N) 케이블잡이A(7N) 1 A-29 12-016M-2350 A,A-7 Earth Line 어스선 ( 조 ) 1 A-30 PTC-AG000100 B,B-7 Nylon Clip 나이론클립 3 A-31 CGA-GA000201 A,A-7 Needle Plate(A-TYPE) 바늘판 (A 形 ) 1 Jun.18.12 A-32 CGA-GA002001 B,B-7 Needle Plate(B-TYPE) 바늘판 (B 形 ) 1 Jun.18.12 A-33 CGA-GA001200 Needle Plate(BH-TYPE) 침판 ( 마그린 ) 1 A-34 DSC-BC000100 Screw(11/64 n=40) 침판나사 (11/64 n=40) 2 A-35 CMB-LB004400 Slide Plate 미끄럼판 ( 組 ) 1 A-36 CMB-BJ002400 A Gauge Plate 게이지부착판 1 A-37 01-136S-1230 Screw(11/64 n=40) 침판나사 (11/64 n=40) 1 A-38 GP-009247-00 A-7 Model Mark(KM-250A) 모델마크 (KM-250A) 1 A-39 01-045M-250B B-7 Model Mark(KM-250B) 모델마크 (KM-250B) 1 A-40 GP-009253-00 Model Mark(KM-250A-7S) 모델마크 (KM-250A-7S) 1 A-41 GP-009254-00 Model Mark(KM-250B-7S) 모델마크 (KM-250B-7S) 1 A-42 CMB-BJ006600 Machine Number Plate 번호판 1 A-43 PPN-AD000100 Pin 번호판핀 2 A-45 CMB-HK002000 A-7,B-7 Upper Thread Guide Pin and Nut 실안내봉 1 A-47 ATA-PS001201 A,B Sub Upper Thread Tension Control Ass y 보조사조자 1Set A-48 DSC-CA001600 A,B Screw(11/64 n=40) 실늦추기고정나사 (11/64 n=40) 1 A-51 CMB-HK000500 A,A-7 Arm Thread Guide 암실걸이 1 A-52 DSC-BA000100 B,B-7 Screw(9/64 n=40) 오일펌프카바나사 (9/64 n=40) 1 A-53 CMB-HK001900 Thread Guide 면판실걸이 1 A-53-1 CMB-HK000100 A,A-7 Thread Guide 면판실걸이 1 A-54 AS-005578-00 B,B-7 Screw(9/64 n=40) 오일펌프카바나사 (9/64 n=40) 1 7
A Machine Body & Thread Tension Adjusting Mechanism 외장 & 실장력조절관계 8
Ref. No. Parts No. Note Name of Parts 품 명 Q ty A-55 ATA-PS001303 B,B-7 Thread Tension Control Ass y 실조절장치 1Set A-56-1 ATA-PS005400 Thread Tension Control Ass y 실조정장치 ( 組 ):B 形 (1Set) A-56-2 DSP-BA002300 A,B Thread Tension Adjusting Spring 소라스프링 (123B) (1) A-57 08-001S-1230 A,B Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 A-58 DSC-HC000600 Bed Base FRONT (B) 베드받침 ( 후 ) 1 A-59 01-227A-1230 Thread Guide With Three Holes 세구멍실걸이 1 A-60 DPK-CZ000200 Cap For Tension Release Pin 누유방지용캡 1 A-61 DSC-CB000700 Screw(M5 L5) 세구멍실걸이고정나사 1 A-62 CGA-GA003200 AL Needle Plate 침판 ( 박물용 ) 1 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 9
B Upper Shaft & Needle Bar Mechanism 상축및바늘대관계 10
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period B-1 CUS-KC000500 Upper Shaft 상축 (SERVO용:L=419.5mm) 1 B-2 CUS-CH000101 Oil Adjusting Pin 상축유량조절핀 (137&235) 1 Feb.19.09 B-3 PPK-BA000400 O-Ring 상축유량조절핀오링 2 B-5 CLB-JL001600 Upper Shaft Felter 상축휄트 1 B-7 CUS-DA000600 Link Cam(A-TYPE) 링크캠 (A 形 ) 1 B-8 02-102A-250B Link Cam(B-TYPE) 링크캠 (B 形 ) 1 B-9 DSC-BF003700 Screw(9/32 n=28) 링크캠위치고정나사 (9/32 n=28) 1 B-12 GP-011576-00 Upper Shaft Bushing(Non Trimming) 상축전붓싱 ( 비사절 ) 1 B-14 DBS-DA003001 Upper Shaft Bushing(M) 싱축중붓싱 1 B-15 DSC-CA000100 Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 B-16 DCL-AA000100 Upper Shaft Collar 상축카라 1 B-17 DSC-CA000500 Screw(1/4 n=40) 홈붙이멈춤나사 (1/4 n=40) 2 B-18 DGR-AD000100 Upper Shaft Gear 상축기어 1 B-19 DSC-CA000500 Screw(1/4 n=40) 홈붙이멈춤나사 (1/4 n=40) 2 B-21 DBS-DB001101 A,B Upper Shaft Bushing(R) 상축후붓싱 1 DBS-DB001200 A-7,B-7 Upper Shaft Bushing(R) 상축후붓싱 1 B-22 PPK-AA000100 Oil Sea 상축오일씰 1 B-23 DPL-AA000201 A-7,B-7 Pulley(Only For Trimming M/C) 풀리 1 B-23-1 DPL-AA000201 A,B Pulley(Only For Regular M/C) 풀리 1 B-25 DSC-BF000800 Screw(15/64 n=28) 풀리고정나사 (15/64 n=28) 2 B-26 DSC-BG000200 Screw(5/16 n=24) 풀리큰나사 (5/16 n=24) 1 B-27 08-201A-250A A,A-7 Thread Take Up Lever Ass y(a-type) 실채기 ( 조 ) 110-35003 (1) B-28 08-102A-123B B,B-7 Thread Take Up Lever Ass y(b-type) 실채기 ( 조 ) (1) B-29 08-102A-146L BL,BL-7 Thread Take Up Lever Ass y(b-type:option) 실채기 DB130 G222 1Set B-30 DSC-CA001100 Screw(1/4 n=40) 실채기핀고정나사 (1/4 n=40) 2 B-35 DSC-CA000800 Screw(15/64 n=28) 상축붓싱고정나사 (15/64 n=28) 1 B-36 CLB-FZ001000 Oil Protection Rubber 오일막이고무 1 B-37 CUS-BJ000200 Protection Plate 링크캠접촉판 1 B-39 CNB-KA000301 A,A-7 Needle Bar(A-TYPE) 바늘대 (A 形 ) 1 Aug.06.12 B-40 GP-056098-00 B,B-7 Needle Bar(B-TYPE) 바늘대 (B 形 ) 1 Aug.06.12 B-41 DBS-DA003400 Needle Bar Bushing(U) 바늘대상붓싱 (235) 1 B-42 DBS-DA003501 Needle Bar Bushing(L) 바늘대하붓싱 1 Jan.12.09 B-44 CNB-BH000100 Thread Guide 바늘대하붓싱실안내 1 B-45 CNB-CD000201 Needle Bar Guide Slider Block 바늘대안내블록 1 B-46 CNB-HK000400 A,A-7 Needle Bar Thread Guide(A-TYPE) 바늘대실안내 (A 形 ) 1 B-47 CNB-HK002100 B,B-7 Needle Bar Thread Guide(B-TYPE) 바늘대실걸이 1 B-48 DSC-BF000100 Screw(1/8 n=44) 홈붙이납작작은나사 (1/8 n=44) 1 B-49 - A,A-7 Needle 바늘 1 B-50 - B,B-7 Needle 바늘 1 B-51 - Synchronizer Ass y 싱크로나이저 1Set B-51-1 AS-020404-00 Magnetic Holder 마그네특홀더 (2) B-51-2 11-022W-2500 Washer 마그네틱홀더죔와셔 (4) B-51-3 11-021S-2500 Screw 마그네특홀더죔나사 (4) B-51-4 13-0000-SE55 Synchronizer Ass y (Servo) 싱크로나이저 ( 조 )Servo (1Set) B-52 DSC-CA000500 Screw(1/4 n=40) 상축카라나사 (1/4 n=40) 1 B-54 DWS-AA003800 Rubber 상축유량조절고무 1 B-55 DBS-DB001000 Upper Shaft Bushing(Trimming) 상축전붓싱 ( 사절 ) 1 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 11
C Upright Shaft & Lower Shaft Mechanism 세운축및하축관계 12
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period C-1 CUR-KC000100 Upright Shaft 입축 1 C-2 DGR-AD000200 Upright Shaft Gear(U) 입축상기어 1 C-3 DSC-CA000500 Screw(1/4 n=40) 홈붙이멈춤나사 (1/4 n=40) 2 C-5 DBS-DA003700 Upright Shaft Bushing(U) 입축상붓싱 1 C-6 DSC-CA000800 Screw(15/64 n=28) 상축붓싱고정나사 (15/64 n=28) 1 C-7 DBS-DA003801 Upright Shaft Bushing(L) 입축하붓싱 1 C-8 DGR-AD000300 Upright Shaft Gear(L) 입축하기어 1 C-9 DSC-CA001900 Screw(1/4 n=40) 기어나사 (1/4 n=40) 2 C-10 CLS-KC000701 Lower Shaft 하축 1 Feb.21.09 C-11 DGR-AD000400 Lower Shaft Gear 하축기어 1 C-12 CLB-JL002400 A,A-7 Lower Shaft Felt 하축휄트 1 C-13 DSC-BF007000 Cap Screw For Lower Shaft oil 하축휄트꽂이나사 1 C-14 DSC-CA000500 Screw(1/4 n=40) 홈붙이멈춤나사 (1/4 n=40) 2 C-16 DBS-DA004101 Lower Shaft Bushing(R) 하축뒷붓싱 1 C-17 DSC-CA000800 Screw(1/4 n=40) 상축붓싱고정나사 (1/4 n=40) 1 C-18 DBS-DA004000 A-7,B-7 Lower Shaft Bushing(M) 하축중붓싱 (7.94 20 25) 1 C-19 DBS-DA003901 A-7,B-7 Lower Shaft Bushing(F) 하축전붓싱 1 C-20 DBS-DA026300 A,B Lower Shaft Bushing(F) 하축전붓싱 1 C-21 DSC-CA000100 Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 C-22 DSC-BF004000 Screw(3/16 n=32) 하축오일조절나사 (3/16 n=32) 1 C-23 DSP-AA001600 Spring 하축오일조절나사스프링 1 C-24 DCL-AA001700 Collar For Lower Shaft 오일펌프카라 (B) 7.94 17 8 1 C-25 DSC-CB001000 Screw(11/64 n=40) 하축중베어리붓싱고정나사A(11/64 n=40) 2 C-26 CHK-HA000700 A-7 Rotary Hook Ass y 가마 (HSH-7.94BTR) 1Set C-27 CHK-HA001900 A Rotary Hook Ass y 가마 (HSH-7.94B) 1Set C-28 CHK-HA000900 B-7 Rotary Hook Ass y 가마 (HSH-7.94BOHNTR) 1Set C-29 07-007A-123B B Rotary Hook Ass y 가마 (HSH-7.94BOH) 1Set C-30 CHK-HB000600 Bobbin(AL) 보빈 1 C-32 CHK-HC000700 A-7,B-7 Bobbin Case Ass y 보빈케이스 1Set C-33 GP-022643-00 B Bobbin Case Ass y 보빈케이스 1Set C-34 CHK-HH000400 Inner Bobbin Stopper 가마잡이 1 C-35 DSC-BF001000 Screw(11/64 n=40) 홈붙이납작작은나사 (11/64 n=40) 1 C-36 DWS-CA000100 Washer 가마잡이와셔 1 C-37 CHK-HH000400 A Inner Bobbin Stopper 가마잡이 1 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 13
D Feed Mechanism 피이드관계 14
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty D-1 CLF-DC000100 A,A-7 Feed Cam A 피이드캠A 1 D-2 DSC-CA001900 Screw(1/4 n=40) 기어나사 (1/4 n=40) 2 D-3 06-101A-250B B,B-7 Feed Cam B 피이드캠B 1 D-4 PSR-AA000400 Stop-Ring C 스냅링 28#D 1 D-5 CLF-DC000200 Feed Cam C 피이드캠 C 1 D-6 DSC-CA001100 Screw(1/4 n=40) 실채기핀고정나사 (1/4 n=40) 2 D-7 CLF-CC000100 Feed Rocker Shaft Connecting Rod 수평이송롯드 1 D-8 CLF-CC000200 Crank Rod 크랭크롯드 1 D-9 CFA-CA000300 A-7,B-7 Feed Regulator Link 피이드조절링크 1 D-10 CFA-CA001300 A,B Feed Regulator Link 피이드조절링크 1 D-11 DPN-AA000100 Feed Connection Link Pin(A) 피이드연결링크핀 (A) 1 D-12 DSC-BF006300 Screw(11/64 n=40) 하축뒷붓싱죔나사 (11/64 n=40) 1 D-13 CLF-CA000200 Feed Connection Link(A) 피이드연결링크 (A) 2 D-14 CLF-CA000300 Feed Connection Link(B) 피이드연결링크 (B) 2 D-15 DPN-BC001000 Feed Adjusting Link Hinge Pin(A) 피이드조절링크힌지핀 (A) 1 D-16 DSC-CA001100 Screw(1/4 n=40) 실채기핀고정나사 (1/4 n=40) 1 D-17 DPN-BC001100 Feed Adjusting Link Hinge Pin(B) 피이드조절링크힌지핀 (B) 1 D-18 DSC-CB000400 Screw(1/4 n=40) 실채기핀고정나사 (1/4 n=40) 1 D-19 DPN-AA003900 Feed Connection Link Pin(B) 피이드연결링크핀 (B) 1 D-20 DSC-BF006300 Screw(11/64 n=40) 하축뒷붓싱죔나사 (11/64 n=40) 1 D-21 DPN-AA004000 Feed Connection Link Pin(C) 피이드연결링크핀 (C) 1 D-22 DSC-BF003600 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 D-23 DPN-AA004100 Hinge Pin 피이드조절연결롯드힌지핀 1 D-24 PSR-AC000200 E-Ring(ф5) E링 (ф5) 1 D-25 DSC-BF003600 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 D-26 CLF-CB000800 Level Feed Crank(R) 수평밀대크랭크 ( 後 ) 1 D-27 DSC-AA001000 Screw(3/16 n=28) 들대고정나사 ( 신 ) 1 D-28 CLF-KF000200 Feed Rock Shaft 수평밀대 1 D-30 DBS-DA006800 Feed Rock Shaft Bushing(R) 들대붓싱 ( 후 ) 11.11 16.8 20 1 D-31 DSC-CA000100 Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 D-32 DBS-DA006700 Feed Rock Shaft Bushing(F) 수평밀대前붓싱 11.11 17.74 16 1 D-33 DSC-CA000100 Screw(15/64 n=28) 실채기힌치핀나사 (15/64 n=28) 1 D-34 CLB-FZ000100 Oil Cover 들밑대고무마개 2 D-35 CLF-CB000700 Feed Bar Crank 톱니받침크랭크 1 D-36 DSC-BF002600 Screw(3/16 n=32) 톱니받침크랭크죔나사 (3/16 n=32) 2 D-37 CLF-KH000100 Feed bar Shaft 톱니받침축 1 D-39 CLB-BG002300 Wick Holder 심지지지대 1 D-40 DSC-BF007700 Screw(1/8 n=44) 심지지지대나사 (1/8 n=44) 2 D-41 DWS-AA001500 Washer 톱니받침축와셔 1 D-42 DSC-BF000400 Screw(15/64 n=28) 톱니받침축고정나사 (15/64 n=28) 1 D-43 GP-034931-00 Feed Bar 톱니받침 1 D-44 CGA-GB000501 A,A-7 Feed Dog(A-TYPE) 톱니 (A 形 ) 1 D-45 CGA-GB001500 B,B-7 Feed Dog(B-TYPE) 톱니 (B 形 ) P=2.1 1 D-46 CGA-GB001200 Feed Dog(BH-TYPE)(Magrin) 톱니 (Magrin) 1 D-47 DSC-BF001800 Screw(1/8 n=44) 톱니죔나사 (1/8 n=44) 2 D-48 06-117A-1230 Feed Bar Block and Shaft 톱니받침블록 1 D-50 DSC-BF007900 Screw(3/16 n=32) 톱니받침B/L 고정나사 1 D-51 CLF-CB000500 Feed Lifting Shaft Crank(F) 들대크랭크 ( 前 ) 1 D-53 DSC-AA001000 Screw(3/16 n=28) 들대전고정나사 ( 신 ) 1 D-54 CLF-KF000100 Feed Lifting Shaft 들대 1 D-55 CLB-BG005300 Stopper For Wick 오일심지스토파 2 D-56 DBS-DA007100 Feed Lifting Shaft Bushing(F) 들대前붓싱 11.11 17.46 20 1 D-57 DSC-CA000100 Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 D-58 DBS-DA006800 Feed Lifting Shaft Bushing(R) 들대後붓싱 11.11 16.8 20 1 D-59 DSC-CA000100 Screw(15/64 n=28) 실채기힌지핀나사 (15/64 n=28) 1 D-60 06-038A-235A A,A-7 Feed Lifting Shaft Crank(R): A-TYPE 들대크랭크 ( 후 ) 1 D-61 06-041A-235B B,B-7 Feed Lifting Shaft Crank(R): B-TYPE 들대크랭크 ( 후 ) 1 Applied Period 15
D Feed Mechanism 피이드관계 16
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty D-62 DSC-AA001000 Screw(3/16 n=28) 들대전고정나사 ( 신 ) 1 D-63 DPN-AA003600 Crank Rod Connection Pin 들밑대크랭크핀 1 D-64 DSC-BF003600 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 D-65 01-037R-1230 Rubber Cap 들밑대유심마개 2 D-66 GP-008523-00 Feed Regulator Shaft 피이드조절기축 1 D-67 PPK-BA000800 O-Ring 피이드조절기붓싱오링 2 D-68 DSC-CA000800 Screw(15/64 n=28) 상축붓싱고정나사 (15/64 n=28) 1 D-69 CFA-DF000101 A-7,B-7 Feed Regulator 피이드조절기 1 D-70 CFA-DF000800 A,B Feed Regulator 피이드조절기 1 D-71 DSC-AC005700 Bolt (11/64 n=40) 육각구멍붙이볼트 (11/64 n=40) 2 D-72 DCL-AA002800 Collar 피이드조절기축카라 1 D-73 DSC-CA001900 Screw(1/4 n=40) 기어나사 (1/4 n=40) 2 D-74 CFA-KF000300 Feed Adjusting Shaft 피이드조절축 1 D-75 CFA-CC000200 A-7,B-7 Connecting Rod For Feed Regulator 피이드조절롯드 1 D-75-1 CFA-CC000900 A,B Feed Regulator Rod 피이드조절기롯드 1 D-76 PSR-AC000200 E-ring(Ø5) E링 (Ø5) 1 D-77 CFA-BJ000300 A-7,B-7 B/T Spring Holder 자동역진스프링홀더 1 D-78 DSC-BJ000300 A-7,B-7 Screw(9/64 n=40) 톱카바나사 ( 우 )(9/64 n=40) 2 D-79 DSP-AB004800 A-7,B-7 Reverse Feed Spring 역진레버스프링 1 D-80 DSC-FH000500 A-7,B-7 Holder 자동역진스프링걸이 1 D-81 CFA-KF000100 Reverse Feed Control Lever Shaft 역진레버축 1 D-82 PPK-BA000700 O-Ring 레버축오링 1 D-83 CFA-CB000300 A-7,B-7 Reverse Feed Lever Crank Ass y 역진레버인장크랭크 ( 조 ) (1) D-84 AFA-PS000600 A,B Reverse Feed Lever Crank Ass y 역진레버인장크랭크 ( 조 ) (1) D-85 DSC-BA000400 Screw(3/16 n=28) 수평밀대크랭크죔나사 (3/16 n=28) 1 D-86 DSC-BF003100 Screw(11/64 n=40) 가마잡이나사 (11/64 n=40) 1 D-87 DSP-AB003500 A-7 Spring 역진레버스프링 1 D-87-1 DSP-AB004800 B-7 Spring 역진레버스프링 1 D-88 DSP-AB005100 A,B Spring 역진레버스프링 1 D-89 DSC-HD000600 A-7,B-7 Holder 스프링걸이축나사 1 D-90 DSN-AA000900 A-7,B-7 Nut(11/64 n=40) 스프링걸이축나사너트 (11/64 n=40) 2 D-91 CFA-KJ000100 Feed Regulator Dial Shaft 피이드조절다이알축 1 D-92 PPK-BA000900 O-Ring 다이알축오링 2 D-93 CFA-CQ002200 A Feed Regulator Control Plate(4mm) 다이알문자판 (4mm) 1 D-94 CFA-CQ001300 B Feed Regulator Control Plate(7mm) 다이알문자판 (7mm) 1 D-95 DSC-BF001900 Screw(3/16 n=28) 다이알판고정나사 (3/16 n=28) 1 D-96 DPN-AA014600 A,B Pin 다이알핀 1 D-97 DSP-AA002800 Spring 다이알스프링 1 D-98 DSD-AA003000 B-7 Reverse Feed Solenoid Ass y 역진솔레노이드 (SBT-5) 1Set D-98-1 DSD-AA001200 A-7 Reverse Feed Solenoid Ass y 역진솔레노이드 (SBT-5) 1Set D-99 CFA-BB000200 A-7,B-7 Bracket For Reverse Feed Solenoid 역진솔레노이드브라켓 1 D-100 DSC-BB001500 A-7,B-7 Screw(M5 0.8) 역진솔레노이드부착나사 (M5 0.8) 2 D-101 PWS-CA000500 A-7,B-7 Spring Washer For Bracket 싱크로베이스스프링와셔 (Ø6) 3 D-102 PSC-AC000600 A-7,B-7 Screw(M6) 싱크로베이스고정볼트 (M6) 3 D-103 06-131A-257B A-7,B-7 Reverse Feed Solenoid Crank 역진솔레노이드크랭크 1 D-104 DSC-FA006300 A-7,B-7 Stud Screw 역진솔레노이드크랭크단나사 1 D-106 PSN-AA001700 A-7,B-7 Hinge Nut 케이블연결너트 (B) 1 D-107 CFA-CC000301 A-7,B-7 Reverse Solenoid Connecting Rod 역진솔레노이드연결롯드 1 D-108 DPN-AD004000 A-7,B-7 Hinge Pin 역진솔레노이드연결롯드힌지핀 1 D-109 DSC-BF003600 A-7,B-7 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 D-111 DWS-CB000200 Washer 레버와셔 1 D-112 CFA-CM000200 Feed Regulator Lever 역진레버 1 D-113 DSC-BA001400 Screw(3/16 n=32) 역진레버고정나사 (3/16 n=32) 1 D-114 DSC-BJ002400 Screw(3/16 n=32) 레버덮개나사 (3/16 n=32) 1 D-115 CFA-FZ000100 A-7,B-7 Stopper Rubber 역진레버스토퍼 ( 상 ) 고무 1 D-116 DSC-FA006200 A-7,B-7 Stopper Stud Screw 역진레버스토퍼 ( 상 ) 단나사 1 D-117 11-019M-2350 A-7,B-7 Terminal Tube(L) 솔레노이드튜브 1 Applied Period 17
D Feed Mechanism 피이드관계 18
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period D-118 11-018M-2350 Solenoid Terminal(12P) 솔레노이드프러그 1 D-119 DPN-AA003101 Dial Pin 다이알핀 1 D-120 CFA-CQ000100 Feed Regulator ControlPlate(INSERT) 다이알문자판 (4mm)(INSERT) 1 Apr.03.12 D-121 CFA-CQ004000 Feed Regulator ControlPlate(INSERT) 다이알문자판 (7mm)(INSERT) 1 Apr.03.12 D-122 06-103A-25BL Feed Regulator Link 피드조절링크 (BL-TYPE) 1 D-123 06-103A-2BLS Feed Regulator Link 피드조절링크 (BL-7 TYPE) 1 D-124 AFA-PS000100 Dial Shaft Locker Ass y 다이알축잠금장치 ( 조 ) 1Set Aug.10.10 D-125 DSP-AA005200 Dial Shaft Eccentric Stopper Spring 다이알축편심스토퍼스프링 1 D-126 CGA-GB017700 Feed Dog 톱니 1 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 19
E Thread Trimmer Mechanism 사절관계 E-1,65 20
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period E-1 CTT-NB001100 A-7 Fixed Mes 고정메스 1 E-2 DSC-BF006200 A-7, B-7 Screw(1/8 n=40) 고정메스장력조절나사 (1/8 n=40) 1 E-3 DSN-AA001700 A-7, B-7 Nut(1/8 n=40) 고정메스장력조절나사너트 (1/8 n=40) 1 E-4 CTT-BJ001100 A-7, B-7 Thread Retaining Plate 실가리개 1 E-5 DSC-BJ000200 A-7, B-7 Screw(11/64 n=40) 톱커버힌지고정나사 (11/64 n=40) 1 E-6 DWS-AA001100 A-7, B-7 Washer 뒷뚜껑죔와셔 1 E-7 CTT-NA000600 A-7 Rotary Mes 회전메스 1 E-8 CTT-NA001000 B-7 Rotary Mes 회전메스 1 E-9 DSC-BB001400 A-7, B-7 Screw(11/64 n=40) 접시머리보을트 (11/64 n=40) 2 E-10 CTT-BF000100 A-7, B-7 Thread Trimming Holder 사절홀더 1 E-11 PSR-AA000100 A-7, B-7 Stop-Ring For E-11 스냅링 (15D) 1 E-12 DWS-AA005100 A-7, B-7 Washer 사절홀다와셔 1 E-13 PBR-BA001200 A-7, B-7 Needle Bearing 니이들베어링 1 E-14 CTT-CA000400 A-7, B-7 Thread Trimming Lever Connecting Link 사절레버연결링크 1 E-15 DSC-FA005600 A-7, B-7 Stud Screw 사절레버연결링크단나사 2 E-16 DSN-AA000900 A-7, B-7 Nut(11/64 n=40) 스프링걸이축나사너트 (11/64 n=40) 1 E-17 CTT-CB000600 A-7, B-7 Thread Trimming Lever 사절레버 1 E-18 PSC-AC000600 A-7, B-7 Screw(M6) 싱크로베이스고정볼트 (M6) 1 E-19 CTT-KF000200 A-7, B-7 Thread Trimming Shaft 사절축 1 E-20 DWS-AA005200 A-7, B-7 Washer 사절축와셔 1 E-21 PSR-AC000100 A-7, B-7 E-Ring(Ø9) 제어체축링 (E링 Ø9) 1 E-22 DCL-BA000600 A-7, B-7 Return Spring Guide Bushing 리턴스프링가이드붓싱 1 E-23 DSP-AA002500 A-7, B-7 Slide Arm Return Spring 슬라이드아암리턴스프링 1 E-24 CTT-CM000501 A-7, B-7 Slide Arm 슬라이드아암 1 E-25 CTT-CL000300 A-7, B-7 Roller 로울러 1 E-26 DSC-GA000400 A-7, B-7 Stud Screw For E-26 로울러단나사 1 E-26-1 DWS-CA000100 Washer 가마잡이와셔 1 E-27 DSN-AA000600 A-7, B-7 Nut(3/16 n=32) 오프너너트 (3/16 n=32) 1 E-28 CTT-FB000200 A-7, B-7 Cushion Washer 쿠션고무 (B) 1 E-29 CTT-CB000700 A-7, B-7 Cam Follower Crank 사절캠종동크랭크 1 E-30 DSC-BJ002000 A-7, B-7 Screw 노루발상하운동캠고정나사 2 E-31 DSC-BF007200 A-7, B-7 Stopper Screw 스토퍼쿠션나사 1 E-31-1 CTT-FD000200 A-7, B-7 Cushion Rubber 스토퍼쿠션고무 1 E-32 DSN-AA000400 A-7, B-7 Nut(15/64 n=28) 수평운동롯드단나사너트 (15/64 n=28) 1 E-33 DPN-BB001200 A-7, B-7 Stopper Pin 스토퍼핀 1 E-34 DSP-AB001000 A-7, B-7 Spring 사절캠종동크랭크스프링 1 E-35 CTT-BB000800 A-7, B-7 Spring Holder 스프링걸이 1 E-36 DSC-BF000600 A-7, B-7 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 2 E-37 CTT-DF000101 A-7, B-7 Thread Trimming Cam 사절캠 1 E-38 DSC-CB000400 A-7, B-7 Screw(1/4 n=40) 육각구멍붙이멈춤나사 (1/4 n=40) 2 E-39 CTT-CM000600 A-7, B-7 Clutch Lever Ass y 클러치레버 ( 組 ) 1Set E-40 DSC-FH000200 A-7, B-7 Stud Screw 클러치레버작동핀나사 1 E-41 DSN-AA000400 A-7, B-7 Nut(15/64 n=28) 육각너트 (15/64 n=28) 1 E-42 DSC-FD000300 A-7, B-7 Clutch Lever Moving Pin Screw 무릎올림봉단나사 1 E-43 10-028S-257A A-7, B-7 Stud Screw 솔레노이드연결링크단나사 1 E-44 DSN-AA000600 A-7, B-7 Nut(3/16 n=32) 오프너너트 (3/16 n=32) 1 E-45 10-129A-257A A-7, B-7 Base Plate 베이스플레이트 1 E-46 DSC-BF000600 A-7, B-7 Screw(3/16 n=28) 홈붙이납작작은나사 (3/16 n=28) 3 E-47 CTT-CA000500 A-7, B-7 Solenoid Connection Link 솔레노이드연결링크 1 E-48 DPN-AD003300 A-7, B-7 Solenoid Pin 솔레노이드핀 1 E-49 DSC-BF006300 A-7, B-7 Screw(11/64 n=40) 하축뒷붓싱고정나사 (11/64 n=40) 1 E-50 PSR-AC000200 A-7, B-7 E-Ring(Ø5) E링 (Ø5) 1 E-51 DSD-AA001000 A-7, B-7 Thread Trimming Solenoid Ass y 사절솔레노이드 (STT-5) 1Set Sep.23.08 E-52 CTT-BB000700 A-7, B-7 Base 사절솔레노이드베이스 1 E-53 PWS-CA000500 A-7, B-7 Washer 싱크로베이스스프링와셔 (Ø6) 2 E-54 DSC-BF000700 A-7, B-7 Screw(15/64 n=28) 베이스고정나사B(15/64 n=28) 2 E-55 CTT-BH000101 A-7, B-7 Bobbin Catcher 보빈압력봉 1 21
E Thread Trimmer Mechanism 사절관계 E-1,65 22
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period E-56 CTT-BH000201 A-7, B-7 Bobbin Catcher Lever 보빈압력봉레버 1 E-57 CTT-BF000200 A-7, B-7 Bobbin Catcher Holder 레버잡이 1 E-58 DSC-BF000100 A-7, B-7 Screw(1/8 n=44) 홈붙이납작작은나사 (1/8 n=44) 2 E-59 DSC-BF000100 A-7, B-7 Screw(1/8 n=44) 홈붙이납작작은나사 (1/8 n=44) 2 E-60 DSP-AC001700 A-7, B-7 Bobbin Catcher Spring 보빈압력스프링 1 E-61 PSR-AC000500 A-7, B-7 E-Ring(Ø6) E링 (Ø6) 1 E-62 CTT-FD000100 A-7, B-7 Stopper Rubber 보빈압력봉스토퍼 1 E-63 DSC-HC000400 A-7, B-7 Bed base FRONT (B) 베드받침 ( 전 ) 1 E-64 DSC-CA001500 A-7, B-7 Screw 풀리고정나사 1 E-65 CTT-NB000901 B-7 Fixed Mes 고정메스 1 Feb.21.09 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 23
F Presser Foot &Tension Release Mechanism 노루발 & 실늦추기관계 24
Ref. No. Parts No. Note Name of Parts 품 명 Q ty F-1 DSC-HA000100 Screw(9/16 n=20) 압력조절나사 (9/16 n=20) 1 F-2 DSN-CC000100 Presser Adjusting Nut 압력조절나사너트 1 F-3 DSP-AA001700 A,A-7 Presser Adjusting Spring(A-TYPE) 압력조절스프링 (A 形 ) 1 F-4 DSP-AA006200 B,B-7 Presser Adjusting Spring(B-TYPE) 압력조절스프링 (B 形 ) 1 F-5 CPB-KC000300 Presser Adjusting Bar 압력조절봉 1 F-6 CPB-KB000100 Presser Bar 누름대 1 F-7 DBS-DA004200 Presser Bar Bushing 누름대붓싱 1 F-8 CPB-BF000400 Presser Bar Holder 누름대잡이 1 F-9 DSC-BF001200 Screw(11/64 n=40) 가마잡이나사 (11/64 n=40) 1 F-10 CGA-GC000701 A,A-7 Presser Foot Ass y(a-type) 노루발 ( 조 ) 1Set F-11 AGA-PS002200 B,B-7 Presser Foot Ass y(b-type) 노루발 1Set F-12 AGA-PS002700 BH,BH-7 Presser Foot Ass y(bh-type) 노루발 (MAGRIN) 1Set F-13 DSC-BA000200 Screw(9/64 n=40) 노루발죔나사 (9/64 n=40) 1 F-14 CPB-HK000101 Thread Guide Plate 실걸이판 1 F-15 DSC-BJ001400 Screw(9/64 n=40) 윗뚜껑고정판조정나사 ( 대 )(9/64 n=40) 1 F-16 CPB-CM000300 Presser Lifter 누름대올리기 1 F-17 DWS-AA003800 Washer 상축휄트와셔 1 F-18 DSC-BJ000300 Screw(9/64 n=40) 톱커버나사 ( 우 )(9/64 n=40) 1 F-19 CPB-DF000300 Presser Lifter Cam Shaft 누름대올리기캠축 1 F-20 PPK-BA000400 O-Ring 상축유량조절핀오링 1 F-21 APM-PS000501 Presser Lifter Link(set) 누름대올리기링크 ( 조 ) 1 F-22 DSC-FH000300 Hinge Screw 누름대올리기링크힌지나사 2 F-23 PSR-AC000200 E-Ring(Ø5) E링 (Ø5) 5 F-24 CPM-CM000900 Presser Lifter Lever 누름대올림레버 1 F-25 CPM-BH000300 Presser Lifter Connection Bar 누름대올리기연결봉 1 F-26 DSC-FC000100 Stud Screw 누름대올리기연결봉단나사 1 F-27 CPM-CB000400 Knee Lifting Link 무릎올림링크 1 F-28 DSC-FA006000 Hinge Screw 무릎올림링크힌지나사 1 F-29 CPM-CR000200 Knee Lifting Bar 무릎올림봉 1 F-30 DSC-FA000700 Hinge Screw 무릎올림봉힌지나사 1 F-31 DPN-AA003400 A,A-7 Tension Release Pin 실늦추기핀 1 F-32 CTR-BJ001000 Tension Release Plate 실늦추기판 1 F-33 DSC-FH000400 Stud Screw For Tension Release Plate 실늦추기판힌지나사 1 F-34 PSR-AC000200 E-Ring(Ø5) E링 (Ø5) 2 F-35 DSP-AC002101 Spring For Tension Release Plate 실늦추기판스프링 1 F-36 ATR-PS000100 A-7,B-7 Tension Release Cable Ass y 실늦추기케이블 ( 組 ) 1Set F-37 CTR-BG000100 A-7,B-7 Tension Release Cable Holder(U) 실늦추기케이블잡이 (U) 1 F-38 DSC-BH000400 A-7,B-7 Screw(3/16 n=28) 가스킷죔나사 (3/16 n=28) 1 F-39 DSC-BF003600 A-7,B-7 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 F-40 DSC-HZ001100 A-7,B-7 Screw(9/32 n=28) 실늦추기케이블고정나사 1 F-41 PWS-CA000400 A-7,B-7 Spring Washer 스프링와셔 1 F-42 DSN-AA002400 A-7,B-7 Nut (9/32 n=28) 너트 1 F-43 CLB-BH000400 A-7,B-7 Tension Release Cable Holder(M) 휄트잡이스프링 1 F-44 DSC-BF000600 A-7,B-7 Screw(3/16 n=28) 다이알판나사 (3/16 n=28) 1 F-45 40-211A-257A A-7 Tension Release Cable Holder(L)(Ø5) 실늦추기케이블잡이 (L) 1 F-46 DSC-BF003600 A-7,B-7 Screw(11/64 n=40) 와이롯드보강판나사 (11/64 n=40) 1 F-47 40-210A-257A B-7 Tension Release Cable Holder(Ø5) 케이블잡이 1 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 25
G Thread Wiper Mechanism 와이퍼관계 26
Ref. No. Parts No. Note Name of Parts 품 명 Q ty G-1 AWP-PS000800 A-7, B-7 Wiper Bracket Ass y 와이퍼브라켓 ( 組 ) 1Set G-2 DSC-BF000600 A-7, B-7 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 2 G-3 CWP-KC000201 A-7, B-7 Wiper Rotation Shaft 와이퍼회전축 1 G-4 PSR-AC000200 A-7, B-7 E-Ring(Ø5) E링 (Ø5) 1 G-5 CWP-BH000200 A-7, B-7 Wiper 와이퍼 1 G-7 DSC-BA000100 A-7, B-7 Screw(9/64 n=40) 오일펌프커버나사 (9/64 n=40) 1 G-8 AWP-PS000200 A-7, B-7 Wiper Crank Ass y 와이퍼크랭크 ( 組 ) 1Set G-9 PSC-CB000200 A-7, B-7 Screw(M4) 동메스축카라고정나사 (M4) 1 G-10 DSC-FA000800 A-7, B-7 Hinge Screw 지그자그연결링크단나사 ( 도금 ) 1 G-11 DSN-AA000900 A-7, B-7 Nut(11/64 n=40) 스프링걸이축나사너트 (11/64 n=40) 1 G-12 CWP-CA001200 A-7, B-7 Wiper Rod 와이퍼롯드 1 G-13 DSC-FA000800 A-7, B-7 Hinge Screw 지그자그연결링크단나사 ( 도금 ) 1 G-14 DSN-AA000900 A-7, B-7 Nut(11/64 n=40) 스프링걸이축나사너트 (11/64 n=40) 1 G-15 AWP-PS000300 A-7, B-7 Wiper Driving Link Ass y 와이퍼요동링크 ( 組 ) 1Set G-16 DSC-FA000900 A-7, B-7 Hinge Screw 와이퍼요동링크힌지나사 1 G-17 DWS-AA000600 A-7, B-7 Washer 스토파죔와셔 1 G-18 DSN-AA000900 A-7, B-7 Nut(3/16 n=32) 스프링걸이축나사너트 (3/16 n=32) 1 G-19 CWP-CA000100 A-7, B-7 Wiper Solenoid Connection Link 와이퍼솔레노이드연결링크 1 G-20 DSC-FA000800 A-7, B-7 Hinge 지그자그연결링크단나사 ( 도금 ) 1 G-21 DSN-AA000900 A-7, B-7 Nut(11/64 n=40) 스프링걸이축나사너트 (11/64 n=40) 1 G-22 DSP-AC000200 A-7, B-7 Wiper Spring 와이퍼스프링 1 G-23 CWP-BB000100 A-7, B-7 Wiper Base 와이퍼베이스 1 G-24 DSC-BF000600 A-7, B-7 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 3 G-25 CWP-LA000400 A-7, B-7 Wiper Cover 와이퍼커버 1 G-26 DSC-BA000100 A-7, B-7 Screw(9/64 n=40) 오일펌프커버나사 (9/64 n=40) 2 G-27 DSD-AA000800 A-7, B-7 Wiper Solenoid Ass y 와이퍼솔레노이드 (SWP-5) 1Set G-28 PSC-BA000100 A-7, B-7 Screw(M3 0.5) 솔레노이드부착고정나사 (M3 0.5) 4 G-29 PWS-CA000100 A-7, B-7 Spring Washer 솔레노이드부착스프링와셔 4 G-30 PWS-AA000500 A-7, B-7 Washer 솔레노이드부착평와셔 4 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 27
H Reverse Button Mechanism 역진보턴관계 28
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period H-1 CRB-LC000100 A-7,B-7 Reverse Button Case 보턴케이스 1 H-2 DSC-BF008400 A-7,B-7 Screw(9/64 n=40) 무릎올림링크고정나사 (9/64 n=40) 2 H-3 12-131A-5607 A-7,B-7 Reverse Button S/W Ass y 역진보턴스위치 ( 조 ) (2) H-4 DSC-BJ005500 A-7,B-7 Screw 홈붙이둥근납작작은나사 2 H-5 DPN-AA003501 A-7,B-7 Reverse Button Actuator Pin 역진보턴작동핀 1 Feb.13.09 H-6 PSR-AC000100 A-7,B-7 E-Ring(Ø9) 제어체축링 (E링9) 2 H-7 ARB-PS000100 A-7,B-7 Reverse Feed Control Lever 역진작동레버 ( 조 ) 1 H-8 DSC-BA001100 A-7,B-7 Screw(11/64 n=40) 윗뚜껑죔나사 ( 좌 )(11/64 n=40) 1 H-9 DSP-AC002200 A-7,B-7 Spring 역진보턴스위치누름대 S/P 1 H-10 CRB-FD000100 A-7,B-7 Insulated Rubber 스위치받침절연고무 1 H-11 12-010A-5607 A-7,B-7 Reverse Button Cable Bushing 역진보턴케이블붓싱 1 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 29
I Lubrication Mechanism 급유관계 30
Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period I-1 CLB-JJ000400 Oil Gauge Window 유창 1 I-2 PPK-BB000100 O-Ring 유창오링 (G25) 1 I-4 CLB-BJ000400 A,A-7 Arm Oil Shield 면판유방판 1 I-5 CLB-BG005100 B,B-7 Arm Oil Shield 바늘대급유판 1 I-6 CLB-JD000300 Oil Wick 오일심지 1 I-7 DSC-BA000100 Screw(9/64 n=40) 오일펌프커버나사 (9/64 n=40) 1 I-8-1 CLB-JG000300 Oil Return Tube 환류파이프 1 I-10 CLB-BG002200 Oil Return Tube Holder 환류파이프잡이 1 I-11 DSC-BF000600 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=40) 1 I-12 ALB-PS000800 Upper Shaft Oil Pipe Ass y 상축급유파이프 ( 조 ) 1 I-13 CLB-JF000500 Oil Pipe For Lower Shaft 하축급유파이프 1 I-14 ALB-PS001400 Oil Pump Ass y 오일펌프 ( 조 ) 1Set Feb.20.09 I-14-1 CLB-JC000200 Oil Pump Body 오일펌프몸체 (1) I-14-2 PWS-CA000200 Washer 오일펌프몸체죔나사와셔 (40) (3) I-14-3 DSC-BJ000300 Screw(9/64 n=40) 톱커버나사 ( 우 )(9/64 n=40) (3) I-14-4 CLB-JP000500 Nipple For Oil Return Pipe 환류파이프니플 (1) I-14-5 CLB-JP000601 Oil Nipple For Lower Shaft 하축급유니플 (1) Apr.29.10 I-14-6 CLB-BR000100 Impeller 임펠러 (1) I-14-7 CLB-CN000200 Piston 피스톤 (1) Feb.20.09 I-14-8 DSP-AA002700 Piston Spring 피스톤스프링 (1) I-14-9 DSC-BF007400 Pin Screw 피스톤스프링핀나사 (1) I-14-10 PPN-AF000900 Pin 피스톤스프링핀 (RP 2 8) (1) I-14-11 CLB-LB000100 Cover For Oil Pump 오일펌프커버 (1) I-14-12 CLB-JM000400 Oil Pump Cap 오일펌프휄터캡 (1) I-14-13 CLB-BG002100 Magnetic Holder 자석잡이 (1) I-14-14 44-120S-1230 Screw(9/64 n=40) 오일펌프커버나사 (+2.5mm) (4) I-14-15 DCL-AA001500 Collar For Impeller Shagt 오일펌프카라 (1) I-14-16 DSC-CA000400 Screw(11/64 n=40) 오일펌프조인트나사 (11/64 n=40) (2) I-15 44-010A-2500 Oil Pump Bracket 오일펌프브라켓 1 I-16 DSC-BF000600 Screw(3/16 n=28) 다이알판죔나사 (3/16 n=28) 3 I-17 DSP-AC002300 Oil Pump Connection Spring 오일펌프조인프스프링 1 I-18 DCL-AA002600 Oil Pump Connection Collar 오일펌프조인트카라 ( 조 ) 1 I-19 DSC-CA001600 Screw(11/64 n=40) 실늦추기고정나사 (11/64 n=40) 2 I-20 PTC-AG000100 Clip 나이론클립 1 I-21 PTC-AG000200 Cable Tie 케이블타이 1 NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 31
J Accessories Mechanism 액세서리관계 J-23 J-22 32
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty Applied Period J-1 CAC-MH000100 Accessory Bag 악세사리박스 1 J-2 PTL-BA000100 Driver(Large) 드라이버 ( 大 ) 1 J-3 PTL-BA000200 Driver(Middle, Small) 드라이버 ( 中, 小 ) 1 J-5 - Needle(A-Type) 바늘 (A형) 5 J-6 - Needle(B-Type) 바늘 (B형) 5 J-7 CHK-HB000600 Bobbin(AL) 보빈 4 J-9 DTL-CC000100 A-7,B-7 Spanner 고정메스장력조절용스패너 1 J-10 PTL-AB000100 A-7,B-7 L Wrench(2mm) L 렌치 (2mm) 1 J-11 CTT-NB001100 A-7,B-7 Fixed Mes 고정메스 ( 극진사用 ) 1 J-12 CAC-MA000500 A-7,B-7 Head Cover 미싱커버 ( 대 ) 1 J-14 CAC-JB000400 Oil Tank 오일캔 1 J-15 DTC-AK000300 Magnetic 자석 1 J-16 CST-BB002500 Head Hinge 힌지 2 J-17 CST-FF000400 Rubber Cushion For Hinge 힌지고무 ( 대 ) 2 J-18 CST-FD001100 Head Support Rubber A 힌지고무 ( 중 ) 2 J-19 CST-FD001200 Head Support Rubber B 힌지고무 ( 소 ) 2 J-20 - Nail 못 4 J-21 CST-CR000100 Head Rest 미싱받침대 1 J-22 CMB-LA006100 A-7,B-7 Belt Cove A 벨트커버 A(SERVO) 1 J-23 CMB-LA020000 7N Belt Cove A (FOR NP MOTOR) 벨트커버 A(NP) 1 J-24 CMB-LA006200 Belt Cove B 벨트커버 B 1 J-25 DSC-BJ005600 Screw(5/16 n=24) 포스트고정나사 (5/16 n=24) 2 J-26 DWS-AA002900 Washer 새들쥠나사와셔 2 J-27 SC-0184-4118 Screw(3/16 n=28) 홈붙이냄비작은나사 (3/16 n=28) 1 J-28 DWS-AA000600 Washer 스토퍼죔와셔 1 J-29 PSC-DD000100 Nail 목나사 2 J-30 AAC-PS000102 Bobbin Winder Ass y 실감기 ( 조 ) 1Set May.04.11 J-31 CST-JA000800 Oil Pan 오일팬 1 J-32 CAC-MG000300 Oil Pan Gasket 오일팬가스켓 2Set J-33 DSC-BF006100 Screw(M8 1.25) 배유구멍마개나사 (M8 1.25) 1 J-34 CST-FB000200 Packing 배유구멍마개나사오링 1 J-35 CLB-JP002500 Oil Pan Nipple 오일팬니플 1 J-36 SC-0509-1230 Screw(15/64 n=28) 피이드캠고정나사 1 J-37 43-101A-1600 Knee Lifter Ass y 무릎받침 ( 조 ) 1Set J-37-1 CST-KC001300 Knee Lifter Shaft 무릎받침축 1 J-37-2 CST-FZ000100 Knee Lifter Pad 무릎받침고무 1 J-37-3 CST-BJ000401 Knee Lifter Pad Insert Plate 무릎받침고무잡이판 1 Feb.21.09 J-37-4 CST-CA000200 Holder 무릎받침고무연결링크 1 J-37-5 DSC-AA002700 Set Screw 무릎받침연결링크죔나사 1 J-37-6 CST-CB000300 Knee Lifter Arm Joint Complete 무릎받침연결크랭크 1 J-37-7 DSC-CC000100 Screw(5/16 n=18) 무릎받침축고정나사 (5/16 n=18) 2 J-37-8 CST-KC001200 Shaft For J-40 제어체축 1 J-38 PSR-AC000100 E-Ring(Ø9) 제어체축링 (E링 Ø9) 1 J-39 CST-MF000400 Thread Stand Ass y 실패꽂이 ( 조 ) 1Set J-40 CST-BB002900 Knee Lifting Controller 제어체 1 J-41 DSC-AA000300 Screw(15/64 n=28) 포크죔나사 ( 육각 )(15/64 n=28) 1 J-42 DSC-BA002700 Screw(15/64 n=28) 제어체운동조절나사 ( 중 )(15/64 n=28) 1 J-43 DSC-BA002800 Screw(15/64 n=28) 제어체운동조절나사 ( 대 )(15/64 n=28) 1 J-44 DSN-AA000400 Nut(15/64 n=28) 수평운동조절축너트 (15/64 n=28) 2 J-45 DSP-AC005600 Spring 제어체스프링 1 J-46 CST-CR000500 Knee Base Rubber 무릎올림봉받침캡 1 J-47 DPK-CB000800 7N Rubber Cap 바늘대상붓싱마개 ( 흰색 )40 1 J-48 DPK-DC000300 Packing 오일팬누유방지고무 1 J-49 CGA-GA000201 A,A-7 Needle Plate(A-Type) 침판 (A형) 1 Jun.18.12 J-50 CGA-GA002001 B,B-7 Needle Plate(B-Type) 침판 (B형) 1 Jun.18.12 J-51 CGA-GA001200 BH Needle Plate(BH-Type) 침판 (BH형) 1 J-52 CAC-JB000100 Oil Tank 유차 1 33
J Accessories Mechanism 액세서리관계 J-23 J-22 34
Ref. No. Parts No. Note Name of Parts 품명 Q ty J-53 CLB-JG000300 Oil Return Tube 환류파이프 1 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 35
K Program Unit Box & Presser Lifting Solenoid Mechanism 프로그램유니트박스 & 자동무릎올림관계 36
Ref. No. Parts No. Note Name of Parts 품 명 Q ty K-7 KM-2507 A-7,B-7 Auto Knee Lifter Solenoid Ass y 자동무릎올림솔레노이드 ( 조 ) 1 K-7-1 HEC-2507 A-7,B-7 Auto Knee Lifter Solenoid Ass y 자동무릎올림장치 (SPF-5) (1Set) K-7-6 DSC-BF000700 A-7,B-7 Screw(15/64 n=28) 베이스고정나사 B(15/64 n=28) (4) K-7-7 DWS-AA028400 A-7,B-7 Washer 포크죔나사와셔 (4) K-7-8 DSN-AA000700 A-7,B-7 Nut(15/64 n=28) 세구멍실걸이너트 (15/64 n=28) (4) K-7-9 43-013A-257A A-7,B-7 Knee Lifter Connection Crank 자동무릎올림연결크랭크 (AK) (1) K-7-10 PSC-AC011100 A-7,B-7 Screw(3/16 n=28) 들대크랭크 ( 전 ) 고정나사 (3/16 n=28) (1) K-7-11 43-014A-257A A-7,B-7 Back Cover For Knee Lifter 자동무릎올림뒷뚜껑 AK (1) K-7-12 DBS-DA028100 A-7,B-7 Knee Lifter Shaft Bushing 자동무릎올림축붓싱 AK (1) K-7-13 PPK-AD000100 A-7,B-7 Oil Seal 자동무릎올림축오일씰 AK (1) K-7-14 DSN-CY000600 A-7,B-7 Nut For Knee Lifter 자동무릎올림너트 AK (1) K-8-1 APM-PS001200 A-7,B-7 Knee Lifter Shaft 자동무릎올림축 ( 조 ) AK (1) K-8-2 DWS-AA011800 A-7,B-7 Washer 역진레바와셔 (1) K-8-4 DCL-AA005000 A-7,B-7 Collar 자동무릎올림축카라 AK (1) K-8-5 DSC-CA000400 A-7,B-7 Screw(11/64 n=40) 오일펌프조인트나사 (11/64 n=40) (2) Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part NOTE : K-7-15, K-7-16, K-8-3 Deleted Parts List 37
L Special Parts for KM-250AU Series Mechanism KM-250AU 시리즈전용부품관계 38
Ref. No. Parts No. Note Name of Parts 품 명 Q ty L-1 01-135A-235A Needle Plate(AU-Type) 박물용침판 1 L-2 GP-009256-00 Model Mark(KM-250AU) 모델마크 1 L-3 GP-009250-00 Model Mark(KM-250AU-7S) 모델마크 1 L-4 40-104A-257U Thread Tension Control Ass y 실조절장치 (1Set) L-5 08-201A-257U Thread Take-Up Lever Ass y 실채기 (110-91857) (1Set) L-6 - Needle(AU-Type) 바늘 1 L-7 07-003A-257U Oil-Less Rotary Hook Ass y(for Thread Trimmer) 가마HSH-7.94BTR(P) 1Set L-9 07-005S-250U Oil Protection Screw For Lower Shaft 하축급유마개나사 1 L-10 CHK-HC001400 Bobbin Case Ass y 보빈케이스 1Set L-12 CGA-GB017600 Feed Dog(AU-Type) 박물용톱니 1 L-13 05-014C-257U Presser Adjusting Spring 압력조절스프링 1 L-14 CMB-HK008000 Arm Thread Guide(L) Arm 실안내 (L) 1 L-15 05-115C-257U Arm Thread Guide Holder Plates Arm 실안내잡이판 1 L-16 05-116W-257U Washer For Arm Thread Guide Arm 실안내고정와셔 1 L-17 DSN-AA002000 Nut For Arm Thread Guide 와이퍼링크 A 연결단나사너트 1 L-18 DPK-BA000800 O-Ring 하축급유마개나사오링 1 L-19 DPK-CZ000200 Cap For Tension Release Pin 실늦추기핀캡 1 L-20 CGA-GC000701 Presser Foot 노루발 1 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 39
M Special Parts for KM-250AU-7N, KM-250A-7N, KM-250B-7N Mechanism KM-250AU-7N, KM-250A-7N, KM-250B-7N 전용부품관계 40
Ref. No. Parts No. Note Name of Parts 품 명 Q ty M-1 01-45NP-257U 외장형 Model Mark(KM-250AU-7N) 모델마크 (KM-250AU-7N) 1 M-2 01-45NP-257A 외장형 Model Mark(KM-250A-7N) 모델마크 (KM-250A-7N) 1 M-3 01-45NP-257B 외장형 Model Mark(KM-250B-7N) 모델마크 (KM-250B-7N) 1 M-4 CUS-KC003000 외장형 Upper Shaft(NP-Type) 상축 (NP용: L=431mm) 1 M-6 DPL-AA001300 Pulley 풀리 1 M-7-25 DSC-FF002600 외장형 Guide Pin For Synchronizer 싱크로베이스기준핀 (2) M-7-26 SC-0108-4113 외장형 Screw(M6) 육각구멍붙이보울트 (M6) (2) M-7-27 PWS-CA000500 외장형 Washer For Synchronizer 싱크로베이스스프링와셔 (Ø6) (2) M-8 - 내장형 Synchronizer Ass y 싱크로나이저 1Set M-8-1 AS-020404-00 내장형 Magnetic Holder 마그네특홀더 (2) M-8-2 11-022W-2500 내장형 Washer 마그네틱홀더죔와셔 (4) M-8-3 11-021S-2500 내장형 Screw 마그네특홀더죔나사 (4) M-8-4 13-0000-SE55 내장형 Synchronizer Ass y (Servo) 싱크로나이저 ( 조 )Servo (1Set) M-9 DPL-AA000200 Pulley(Only For Trimming M/C) 풀리 1 M-10 12-0000-4701 Synchronizer -N.P 싱크로 -N.P 1Set Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 41
N Special Parts For KM-250BH Series Mechanism KM-250BH 시리즈전용부품관계 42
Ref. No. Parts No. Note Name of Parts 품 명 Q ty N-1 GP-009249-00 Model Mark(KM-250BH) 모델마크 (KM-250BH) 1 N-2 GP-009255-00 Model Mark(KM-250BH-7S) 모델마크 (KM-250BH-7S) 1 N-3 GP-009291-00 Model Mark(KM-250BH-7N) 모델마크 (KM-250BH-7N) 1 N-4 02-102A-250H Link Cam(BH-Type) 링크캠 (BH 形 ) 1 N-5 08-101A-25BH Thread Take-Up Lever Ass y 실채기 ( 조 ) 1 N-6 CMB-HK000100 Thread Guide 면판실걸이 1 N-7 GP-034931-00 Feed Bar(BH-Type) 톱니받침 1 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 43
O Special Parts for KM-250BL Series Mechanism KM-250BL 시리즈전용부품관계 44
NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part Ref. No. Parts No. Note Name of Parts 품 명 Q ty O-1 10-101A-64L7 Fixed Mes 고정메스 1 O-2 DSC-BB002000 Screw(9/64 n=40) 고정메스고정나사 (9/64 n=40) 1 O-3 DSC-BF006200 Screw(1/8 n=40) 고정메스장력조절나사 (1/8 n=40) 1 O-4 DSN-AA001700 Nut(1/8 n=40) 고정메스장력조절나사너트 (1/8 n=40) 1 O-5 CTT-BJ004200 Thread Retaining Plate 실가리게 1 O-6 DSC-BJ000200 Screw(11/64 n=40) 톱커버힌지고정나사 (11/64 n=40) 1 O-7 DWS-AA003800 Washer 실가리개고정와셔 1 O-8 CTT-NA001300 Rotary Mes 회전메스 1 O-9 DSC-BB001400 Screw(11/64 n=40) 회전메스고정나사 (11/64 n=40) 2 O-10 CTT-BF001400 Thread Trimming Holder 사절홀더 1 O-11 10-011C-64L7 Thread Trimming Holder Cover 사절홀더커버 1 O-12 DSC-BB002000 Screw(9/64 n=40) 사절홀더커버고정나사 (9/64 n=40) 3 O-13 10-013C-64L7 Thread Trimming Lever Connecting Link 사절레버연결링크 1 O-14 DSC-FA016400 Stud Screw 사절레버연결링크단나사 (3/16 n=32) 2 O-15 DSN-AA000600 Nut For 오프너너트 (3/16 n=32) 2 O-16 DBS-DB005900 Thread Trimming Lever 사절레버 1 O-17 PSC-AC001200 Screw 역진솔레노이드브라켓죔나사 (M6 P1) 1 O-18 CTT-KF000600 Thread Trimming Shaft 사절축 1 O-19 10-021C-64L7 Guide Bush For Return Spring 리턴스프링가이드붓싱 1 O-20 DSP-AA008500 Slide Arm Return Spring 슬라이드암리턴스프링 1 O-21 CTT-CM002500 Slide Arm 슬라이드암 1 O-22 CTT-CL000300 Roller 사절캠롤러 2 O-23 DSC-GA000400 Stud Screw 사절캠롤러단나사 2 O-24 DSN-AA000600 Nut(3/16 n=32) 오프너너트 (3/16 n=32) 2 O-25 CTT-BF001300 Cam Follwer Crank 사절캠종동크랭크 1 O-26 DSC-BJ000500 Screw(15/64 n=28) 피이드조절크랭크죔나사 (15/64 n=28) 2 O-27 DSP-AC005300 Return Spring 사절축리턴스프링 1 O-28 CTT-CM002400 Stopper Lever 스토퍼레버 1 O-29 DSC-CB000500 Screw(15/64 n=28) 캠접촉안내고정나사 (15/64 n=28) 2 O-30 DCL-AA002800 Collar 사절축카라 1 O-31 DSC-CB000400 Screw(1/4 n=40) 사절캠고정나사 (1/4 n=40) 2 O-32 CTT-BB002900 Stopper 스토퍼 1 O-33 DSC-AA003000 Screw(3/16 n=32) 스토퍼죔나사 (3/16 n=32) 2 O-34 DWS-AA000600 Washer 스토퍼죔나사와셔 2 O-35 CTT-FD000300 Stopper Lever Cushion Rubber 스토퍼레버쿠션고무 1 O-36 CTT-DF000400 Mes Cam 사절캠 1 O-37 DSC-CB000400 Screw(1/4 n=40) 사절캠죔나사 (1/4 n=40) 2 O-38 10-038A-25BL Clutch Lever 클러치레버 1 O-39 DSC-FD000300 Stud Screw 클러치레버단나사 (15/64 n=28) 1 O-40 DSC-FG001400 Stud Screw 클러치레버작동핀나사 (15/64 n=28) 1 O-41 DSN-AA000400 Nut(15/64 n=28) 수평운동롯드단나사너트 1 O-42 DSC-FD000300 Stud Screw 솔레노이드연결링크단나사 (15/64 n=28) 1 O-43 10-044A-25BL Base Plate 베이스플레이트 1 O-44 SC-0485-4113 Screw(M5 P0.8) 스토퍼죔나사 (M5 P0.8) 2 O-45 DWS-CA000100 Spring Washer 가마잡이와셔 (Ø5) 2 O-46 DWS-AA000600 Washer 스토퍼죔와셔 (Ø5) 2 O-47 10-048A-25BL Solenoid Connecting Link 솔레노이드연결링크 1 O-48 DSC-CB000700 Screw(M5xP0.8) 캠접촉카라고정나사 2 O-49 10-144A-2507 Thread Trimming Solenoid Ass y 사절솔레노이드 ( 組 ) 1(Set) O-50 10-151A-25BL Base 사절솔레노이드베이스 1 O-52 PSC-AC001200 Screw(M6 P1) 역진솔레노이드브라켓죔나사 (M6 P1) 2 O-53 PWS-AA000600 Washer 힌지쇠와셔 2 Applied Period 45
P Special Parts for KM-250BL Series Mechanism KM-250BL 시리즈전용부품관계 46
Ref. No. Parts No. Note Name of Parts 품 명 Q ty P-1 01-001A-25BL Arm Bed 아암, 베드 1 P-2 DSC-HC000400 Bed Base Front (B) 베드받침전 (B) 1 P-3 GP-009288-00 Model Mark(KM-250BL-7S) 모델마크 1 P-4 CMB-LA004300 Thread Take up Cover 실채기커버 1 P-5 02-102A-250B Link Cam 링크캠 1 P-6 03-101A-1230 Upright Shaft 입축 1 P-7 006-007-0005 Needle 바늘 DB 1(#21) 1 P-8 06-190A-25BL Bracket For Reverse Feed Solenoid 역진솔레노이드브라켓 1 P-9 07-101A-25BL Lower Shaft 하축 1 P-10 07-009A-25BL Lower Shaft Bushing(M) 하축중붓싱 1 P-11 07-110A-25BL BL Lower Shaft Bushing(F) 하축전붓싱 1 P-11-1 07-110A-2BLS BL-7 Lower Shaft Bushing(F) 하축전붓싱 1 P-12 CHK-HA001300 BL-7 Rotary Hook Ass y 가마 1(Set) P-12-1 CHK-HA003300 250BL Rotary Hook Ass y 가마 1(Set) P-13 CHK-HB000700 Bobbin 보빈 (A1) 1 P-14 CHK-HC000900 BL-7 Bobbin Case Assembly 보빈케이이스 ( 조 ) 1(Set) P-14-1 CHK-HC000500 250BL Bobbin Case Assembly 보빈케이이스 ( 조 ) 1(Set) P-15 08-102A-146L Thread Take up Lever Assembly 실채기 ( 조 ) 1(Set) P-16 44-101A-25BL Oil Pump Bracket 오일펌프브라켓 1 P-17 40-001A-25BL Tension Release Cable Ass y 실늦추기케이블 ( 조 ) 1Set P-18 40-003A-2700 Connecting Bolt 케이블연결볼트 1 P-19 DSN-AA002400 Nut A 케이블연결너트 A 1 P-20 PSN-AA001700 Nut B 케이블연결너트 B 1 P-21 CTR-BG000400 Tension Release Cable Holder(L) 실늦추기케이블잡이 ( 하 ) 1 P-22 DSC-BJ000200 Screw 톱커버힌지고정나사 1 P-23 CTR-BB001000 Bracket 실늦추기케이블잡이 ( 하 ) 브라켓 1 P-24 PSC-AC001500 Screw 고정메스고정나사 2 P-25 DWS-AA001100 Washer 실늦추기케이블잡이 ( 하 ) 브라켓평와셔 2 Applied Period NOTE: A-7=KM-250A-7S B-7=KM-250B-7S A=KM-250A B=KM-250B =Common Part 47
Index Parts No. Name of Parts Page Ref.No. 006-007-0005 Needle 47 P-7 01-001A-250A Arm. Bed Ass y 7 A-1 01-001A-250B Arm. Bed Ass y 7 A-2 01-001A-257A Arm. Bed Ass y 7 A-3 01-001A-257B Arm. Bed Ass y 7 A-4 01-001A-25BL Arm. Bed Ass y 7 A-4-1 01-001A-25BL Arm Bed 47 P-1 01-001A-2BLS Arm. Bed Ass y 7 A-4-2 01-037R-1230 Rubber Cap 17 D-65 01-045M-250B Model Mark(KM-250B) 7 A-39 01-136S-1230 Screw(11/64 n=40) 7 A-37 01-140C-2500 Back Cover 7 A-12 01-142M-2500 Gasket 7 A-13-1 01-227A-1230 Thread Guide With Three Holes 9 A-59 01-45NP-257A Model Mark(KM-250A-7N) 41 M-2 01-45NP-257B Model Mark(KM-250B-7N) 41 M-3 01-45NP-257U Model Mark(KM-250AU-7N) 41 M-1 02-102A-250B Link Cam(B-TYPE) 11 B-8 02-102A-250B Link Cam 47 P-5 02-102A-250H Link Cam(BH-Type) 43 N-4 03-101A-1230 Upright Shaft 47 P-6 05-014C-257U Presser Adjusting Spring 39 L-13 05-115C-257U Arm Thread Guide Holder Plates 39 L-15 05-116W-257U Washer For Arm Thread Guide 39 L-16 06-038A-235A Feed Lifting Shaft Crank(R): A-TYPE 15 D-60 06-041A-235B Feed Lifting Shaft Crank(R): B-TYPE 15 D-61 06-101A-250B Feed Cam B 15 D-3 06-103A-25BL Feed Regulator Link 19 D-122 06-103A-2BLS Feed Regulator Link 19 D-123 06-117A-1230 Feed Bar Block and Shaft 15 D-48 06-131A-257B Reverse Feed Solenoid Crank 17 D-103 06-190A-25BL Bracket For Reverse Feed Solenoid 47 P-8 07-003A-257U Oil-Less Rotary Hook Ass y(for Thread Trimmer) 39 L-7 07-005S-250U Oil Protection Screw For Lower Shaft 39 L-9 07-007A-123B Rotary Hook Ass y 13 C-29 07-009A-25BL Lower Shaft Bushing(M) 47 P-10 07-101A-25BL Lower Shaft 47 P-9 07-110A-25BL Lower Shaft Bushing(F) 47 P-11 07-110A-2BLS Lower Shaft Bushing(F) 47 P-11-1 08-001S-1230 Screw(15/64 n=28) 9 A-57 08-101A-25BH Thread Take-Up Lever Ass y 43 N-5 08-102A-123B Thread Take Up Lever Ass y(b-type) 11 B-28 08-102A-146L Thread Take Up Lever Ass y(b-type:option) 11 B-29 08-102A-146L Thread Take up Lever Assembly 47 P-15 08-201A-250A Thread Take Up Lever Ass y(a-type) 11 B-27 08-201A-257U Thread Take-Up Lever Ass y 39 L-5 10-011C-64L7 Thread Trimming Holder Cover 45 O-11 10-013C-64L7 Thread Trimming Lever Connecting Link 45 O-13 10-021C-64L7 Guide Bush For Return Spring 45 O-19 10-028S-257A Stud Screw 21 E-43 10-038A-25BL Clutch Lever 45 O-38 10-044A-25BL Base Plate 45 O-43 10-048A-25BL Solenoid Connecting Link 45 O-47 10-101A-64L7 Fixed Mes 45 O-1 10-129A-257A Base Plate 21 E-45 10-144A-2507 Thread Trimming Solenoid Ass y 45 O-49 10-151A-25BL Base 45 O-50 11-018M-2350 Solenoid Terminal(12P) 19 D-118 11-019M-2350 Terminal Tube(L) 17 D-117 11-021S-2500 Screw 11 B-51-3 11-021S-2500 Screw 41 M-8-3 11-022W-2500 Washer 11 B-51-2 Parts No. Name of Parts Page Ref.No. 11-022W-2500 Washer 41 M-8-2 01-135A-235A Needle Plate(AU-Type) 39 L-1 12-0000-4701 Synchronizer -N.P 41 M-10 12-010A-5607 Reverse Button Cable Bushing 29 H-11 12-016M-2350 Earth Line 7 A-29 12-131A-5607 Reverse Button S/W Ass y 29 H-3 13-0000-SE55 Synchronizer Ass y (Servo) 11 B-51-4 13-0000-SE55 Synchronizer Ass y (Servo) 41 M-8-4 40-001A-25BL Tension Release Cable Ass y 47 P-17 40-003A-2700 Connecting Bolt 47 P-18 40-104A-257U Thread Tension Control Ass y 39 L-4 40-210A-257A Tension Release Cable Holder(Ø5) 25 F-47 40-211A-257A Tension Release Cable Holder(L)(Ø5) 25 F-45 43-013A-257A Knee Lifter Connection Crank 37 K-7-9 43-014A-257A Back Cover For Knee Lifter 37 K-7-11 43-101A-1600 Knee Lifter Ass y 33 J-37 44-010A-2500 Oil Pump Bracket 31 I-15 44-101A-25BL Oil Pump Bracket 47 P-16 44-120S-1230 Screw(9/64 n=40) 31 I-14-14 AAC-PS0001 Bobbin Winder Ass y 33 J-30 AFA-PS0001 Dial Shaft Locker Ass y 19 D-124 AFA-PS0006 Reverse Feed Lever Crank Ass y 17 D-84 AGA-PS0022 Presser Foot Ass y(b-type) 25 F-11 AGA-PS0027 Presser Foot Ass y(bh-type) 25 F-12 ALB-PS0008 Upper Shaft Oil Pipe Ass y 31 I-12 ALB-PS0014 Oil Pump Ass y 31 I-14 APM-PS0005 Presser Lifter Link(set) 25 F-21 APM-PS0012 Knee Lifter Shaft 37 K-8-1 ARB-PS0001 Reverse Feed Control Lever 29 H-7 AS-005578 Screw(9/64 n=40) 7 A-54 AS-020404 Magnetic Holder 11 B-51-1 AS-020404 Magnetic Holder 41 M-8-1 ATA-PS0012 Sub Upper Thread Tension Control Ass y 7 A-47 ATA-PS0013 Thread Tension Control Ass y 9 A-55 ATA-PS0054 Thread Tension Control Ass y 9 A-56-1 ATR-PS0001 Tension Release Cable Ass y 25 F-36 AWP-PS0002 Wiper Crank Ass y 27 G-8 AWP-PS0003 Wiper Driving Link Ass y 27 G-15 AWP-PS0008 Wiper Bracket Ass y 27 G-1 CAC-JB0001 Oil Tank 33 J-52 CAC-JB0004 Oil Tank 33 J-14 CAC-MA0005 Head Cover 33 J-12 CAC-MG0003 Oil Pan Gasket 33 J-32 CAC-MH0001 Accessory Bag 33 J-1 CFA-BB0002 Bracket For Reverse Feed Solenoid 17 D-99 CFA-BJ0003 B/T Spring Holder 17 D-77 CFA-CA0003 Feed Regulator Link 15 D-9 CFA-CA0013 Feed Regulator Link 15 D-10 CFA-CB0003 Reverse Feed Lever Crank Ass y 17 D-83 CFA-CC0002 Connecting Rod For Feed Regulator 17 D-75 CFA-CC0003 Reverse Solenoid Connecting Rod 17 D-107 CFA-CC0009 Feed Regulator Rod 17 D-75-1 CFA-CM0002 Feed Regulator Lever 17 D-112 CFA-CQ0001 Feed Regulator ControlPlate(INSERT) 19 D-120 CFA-CQ0013 Feed Regulator Control Plate(7mm) 17 D-94 CFA-CQ0022 Feed Regulator Control Plate(4mm) 17 D-93 CFA-CQ0040 Feed Regulator ControlPlate(INSERT) 19 D-121 CFA-DF0001 Feed Regulator 17 D-69 CFA-DF0008 Feed Regulator 17 D-70 CFA-FZ0001 Stopper Rubber 17 D-115 CFA-KF0001 Reverse Feed Control Lever Shaft 17 D-81 CFA-KF0003 Feed Adjusting Shaft 17 D-74 Parts No. Name of Parts Page Ref.No. CFA-KJ0001 Feed Regulator Dial Shaft 17 D-91 CGA-GA0002 Needle Plate(A-TYPE) 7 A-31 CGA-GA0002 Needle Plate(A-Type) 33 J-49 CGA-GA0012 Needle Plate(BH-TYPE) 7 A-33 CGA-GA0012 Needle Plate(BH-Type) 33 J-51 CGA-GA0020 Needle Plate(B-TYPE) 7 A-32 CGA-GA0020 Needle Plate(B-Type) 33 J-50 CGA-GA0032 Needle Plate 9 A-62 CGA-GB0005 Feed Dog(A-TYPE) 15 D-44 CGA-GB0012 Feed Dog(BH-TYPE)(Magrin) 15 D-46 CGA-GB0015 Feed Dog(B-TYPE) 15 D-45 CGA-GB0176 Feed Dog(AU-Type) 39 L-12 CGA-GB0177 Feed Dog 19 D-126 CGA-GC0007 Presser Foot Ass y(a-type) 25 F-10 CGA-GC0007 Presser Foot 39 L-20 CHK-HA0007 Rotary Hook Ass y 13 C-26 CHK-HA0009 Rotary Hook Ass y 13 C-28 CHK-HA0013 Rotary Hook Ass y 47 P-12 CHK-HA0019 Rotary Hook Ass y 13 C-27 CHK-HA0033 Rotary Hook Ass y 47 P-12-1 CHK-HB0006 Bobbin(AL) 13 C-30 CHK-HB0006 Bobbin(AL) 33 J-7 CHK-HB0007 Bobbin 47 P-13 CHK-HC0005 Bobbin Case Assembly 47 P-14-1 CHK-HC0007 Bobbin Case Ass y 13 C-32 CHK-HC0009 Bobbin Case Assembly 47 P-14 CHK-HC0014 Bobbin Case Ass y 39 L-10 CHK-HH0004 Inner Bobbin Stopper 13 C-34 CHK-HH0004 Inner Bobbin Stopper 13 C-37 CLB-BG0021 Magnetic Holder 31 I-14-13 CLB-BG0022 Oil Return Tube Holder 31 I-10 CLB-BG0023 Wick Holder 15 D-39 CLB-BG0051 Arm Oil Shield 31 I-5 CLB-BG0053 Stopper For Wick 15 D-55 CLB-BH0004 Tension Release Cable Holder(M) 25 F-43 CLB-BJ0004 Arm Oil Shield 31 I-4 CLB-BR0001 Impeller 31 I-14-6 CLB-CN0002 Piston 31 I-14-7 CLB-FZ0001 Oil Cover 15 D-34 CLB-FZ0010 Oil Protection Rubber 11 B-36 CLB-JC0002 Oil Pump Body 31 I-14-1 CLB-JD0003 Oil Wick 31 I-6 CLB-JF0005 Oil Pipe For Lower Shaft 31 I-13 CLB-JG0003 Oil Return Tube 31 I-8-1 CLB-JG0003 Oil Return Tube 35 J-53 CLB-JJ0004 Oil Gauge Window 31 I-1 CLB-JL0016 Upper Shaft Felter 11 B-5 CLB-JL0024 Lower Shaft Felt 13 C-12 CLB-JM0004 Oil Pump Cap 31 I-14-12 CLB-JP0005 Nipple For Oil Return Pipe 31 I-14-4 CLB-JP0006 Oil Nipple For Lower Shaft 31 I-14-5 CLB-JP0025 Oil Pan Nipple 33 J-35 CLB-LB0001 Cover For Oil Pump 31 I-14-11 CLF-CA0002 Feed Connection Link(A) 15 D-13 CLF-CA0003 Feed Connection Link(B) 15 D-14 CLF-CB0005 Feed Lifting Shaft Crank(F) 15 D-51 CLF-CB0007 Feed Bar Crank 15 D-35 CLF-CB0008 Level Feed Crank(R) 15 D-26 CLF-CC0001 Feed Rocker Shaft Connecting Rod 15 D-7 CLF-CC0002 Crank Rod 15 D-8 CLF-DC0001 Feed Cam A 15 D-1 CLF-DC0002 Feed Cam C 15 D-5 48