Logitech Bluetooth Illuminated Keyboard K810 Setup Guide
Contents English..........................................3 繁體中文......................................... 13 한국어..........................................23 2
Know your product Logitech Bluetooth Illuminated Keyboard K810 1 2 3 4 5 6 7 8 1. Bluetooth status lights 2. Bluetooth keys 3. Function keys 4. Battery status light 5. On/Off switch 6. Bluetooth connect button 7. Micro-USB port 8. Micro-USB charging cable English 3
Set up your product Pair your first device 1. Turn on the Bluetooth keyboard. 2. Press the Bluetooth connect button. The lights above the Bluetooth keys blink blue. 3. Press a Bluetooth key to assign your first device to that key: The light above the selected key continues to blink blue. The Bluetooth keyboard is discoverable for 15 minutes. 4 English
4. Complete Bluetooth pairing on your device: Windows 7 and 8: a. Go to Control Panel > Devices and Printers. b. Click Add a device. c. Choose Logitech K810 from the device list. d. Click Next, and follow the on-screen instructions. Apple ios (ipad or iphone): a. In Settings, choose Bluetooth, and then turn on Bluetooth. b. Choose Logitech K810 from the Devices menu. Android a. In Settings, choose Wireless and network > Bluetooth settings, and then turn on Bluetooth. b. Choose Logitech K810 from Bluetooth devices. Note: If your mobile device requests a PIN, enter the code using the Bluetooth keyboard and not the virtual keyboard on your mobile device. The Bluetooth keyboard and your device are now paired. The light above the Bluetooth key you have selected turns blue for 30 seconds. For Windows, to customize the function keys and to specify backlight settings, download and install software at www.logitech.com/support/k810. English 5
Pair or reassign a Bluetooth key to another device Pair up to three compatible devices with the Bluetooth keyboard. 1. Make sure the keyboard is on. 2. Press the Bluetooth connect button. The lights above the Bluetooth keys rapidly blink blue. 3. Press a Bluetooth key to assign your device to that key. For example, if you already paired a device to Bluetooth key 1, press the Bluetooth key 2. The light above the selected key continues to blink blue. The keyboard is discoverable for 3 minutes. 4. Go to Pair your first device and follow step 4 to complete Bluetooth pairing. Note: After you press the Bluetooth connect button, the lights above the Bluetooth keys blink blue. All three Bluetooth keys can be assigned or reassigned, and the Bluetooth keyboard is discoverable for 3 minutes. 6 English
Switching among paired devices Logitech Bluetooth Illuminated Keyboard K810 To select a paired device: Press the Bluetooth key (1, 2, or 3) associated with it. The light above the selected key blinks blue, indicating the Bluetooth keyboard is connecting. The light turns solid blue for 5 seconds, indicating the connection has been made. For example, if a device is paired with the Bluetooth 2 key, press that key to use the device with the Bluetooth keyboard. Note: Only one device can be active at a time. English 7
Charge the batteries A three-hour charge provides up to 10 days of use when you type about two hours a day with the backlight on, or about one year without backlight. You can use the Bluetooth keyboard while it charges. To check battery power and to charge the keyboard, do the following: 1. Turn on the Bluetooth keyboard. Battery Status light flashes green: the battery has an adequate charge. Battery Status light flashes red: recharge the battery. Go to step 2. USB 2. Connect the Bluetooth keyboard to a computer using the Micro-USB charging cable. The Battery Status light will pulse green. Charge for 1 to 3 hours, or until the Battery Status light turns off. Note: If the battery power is critically low, the keyboard backlight is disabled and the battery status light will blink red 8 English
Visit Product Central There s more information and support online for your product. Take a moment to visit Product Central to learn more about your new Bluetooth keyboard. Browse online articles for setup help, usage tips, or information about additional features. If your Bluetooth keyboard has optional software, learn about its benefits and how it can help you customize your product. Connect with other users in our Community Forums to get advice, ask questions, and share solutions. Logitech Bluetooth Illuminated Keyboard K810 At Product Central, you ll find a wide selection of content Tutorials Troubleshooting Support community Software downloads Online documentation Warranty information Spare parts (when available) Go to www.logitech.com/support/k810 English 9
Use your product 1 2 3 4 5 6 7 8 9 Function and media keys 1. Bluetooth keys 1, 2 and 3 Pair up to three compatible devices. 2. Application switch Cycles through open apps. 3. Decrease (F5) and Increase (F6) keyboard backlight intensity 4. Play/Pause 5. Mute 6. Volume down 7. Volume up 8. Home 9. Multifunction key Calculator Windows only Show/Hide virtual keyboard ios only F-keys: F1 to F12 To use in Windows, press and hold the Fn key, and then press an F-key. Customizable with optional software. See Software for Windows. 10 English
Software for Windows Download and install the Logitech Software for F-key functionality and customization; also specify backlight settings. Go to www. logitech.com/support/k810 Keyboard backlight Keyboard sensors detect your hands, turning the backlight on and off. The backlight adjusts automatically to the level of your room light. Bright light and low battery power cause the backlight to turn off, which helps conserve battery power. In bright light, the F5 and F6 keys are disabled. Automatic backlight control turns off when you use the F5 or F6 keys to adjust backlight intensity. You can restore automatic backlight control by turning the keyboard off then on. If the keyboard is idle for two hours or more, automatic backlight control is restored automatically. Logitech Bluetooth Illuminated Keyboard K810 Troubleshooting Keyboard not working Slide the On/Off switch to Off then to On. If the Battery Status light flashes red, recharge the batteries. For more information, see Charge the batteries. Go to Bluetooth settings on your device to check if Logitech K810 is present. If it is, remove it. Then follow steps 2 4 in Pair your first device to redo Bluetooth pairing. If you re using custom Bluetooth hardware and software, refer to your product documentation to resolve any Bluetooth issues. English 11
Battery disposal at product end of life 1 2 3 4 5 6 1. On keyboard bottom, pry off cover and remove 4 screws. 2. On keyboard top, pry off cover surrounding F-keys and remove 5 screws. 3. Separate top and bottom cases. 4. Remove 5 screws securing circuit board. 5. On bottom of circuit board, remove battery cable. Remove battery from bottom case. 6. Dispose of battery and product according to local laws. 12 English
認識產品 Logitech Bluetooth Illuminated Keyboard K810 1 2 3 4 5 6 7 8 1. 藍牙 狀態指示燈 2. 藍牙鍵 3. 功能鍵 4. 電量狀態指示燈 5. On/Off 開關 6. 藍牙連線按鈕 7. 微型 USB 連接埠 8. 微型 USB 充電連接線 繁體中文 13
設定產品配對您的第一個裝置 1. 開啟藍牙鍵盤電源 2. 按下 藍牙連線 按鈕 藍牙鍵上的指示燈會閃爍藍燈 3. 按下藍牙鍵以將您的第一個裝置指派到該鍵 : 所選藍牙鍵上的指示燈會持續閃爍藍燈 藍牙鍵盤會處於可偵測狀態 15 分鐘 14 繁體中文
4. 在裝置上完成藍牙配對 : Windows 7 及 8: a. 移至 控制台 > 裝置與印表機 b. 按一下 新增裝置 c. 從裝置清單中選擇 羅技 K810 d. 按一下 下一步, 遵循螢幕上的指示進行操作 Apple ios (ipad 或 iphone): a. 在 設定 中選擇 藍牙, 然後開啟藍牙功能 b. 從 裝置 功能表中選擇 羅技 K810 Logitech Bluetooth Illuminated Keyboard K810 Android a. 在 設定 中選擇 無線與網路 > 藍牙設定, 然後開啟藍牙功能 b. 從 藍牙裝置 中選擇 羅技 K810 注意 : 如果您的行動裝置要求 PIN 碼, 請使用藍牙鍵盤輸入代碼, 不要使用行動裝置的虛擬鍵盤 藍牙鍵盤和您的裝置現在已完成配對 您所選取之藍牙鍵上的指示燈會轉成藍燈 30 秒鐘 對於 Windows, 若要自訂功能鍵與指定背光設定, 請前往 www.logitech.com/support/k810 下載並安裝軟體 繁體中文 15
配對或將藍牙鍵重新指派到其他裝置此藍牙鍵盤最多可與三個相容裝置配對 1. 確認鍵盤電源已開啟 2. 按下 藍牙連線 按鈕 藍牙鍵上的指示燈會快速閃爍藍燈 3. 按下藍牙鍵以將您的裝置指派到該鍵 例如, 如果您已將某個裝置與藍牙鍵 1 配對, 則請按下藍牙鍵 2 所選藍牙鍵上的指示燈會持續閃爍藍燈 鍵盤會處於可偵測狀態 3 分鐘 4. 瀏覽 配對您的第一個裝置 並依照步驟 4 的說明完成藍牙配對 注意 : 按下藍牙連線按鈕之後, 藍牙鍵上的指示燈會閃爍藍燈 所有三個藍牙鍵都可以進行指派或重新指派, 且藍牙鍵盤會處於可偵測狀態 3 分鐘 16 繁體中文
在已配對的裝置間進行切換 Logitech Bluetooth Illuminated Keyboard K810 若要選取已配對的裝置 : 按下與裝置關連的藍牙鍵 (1 2 或 3) 選取之藍牙鍵上的指示燈會閃爍藍燈, 指明目前正連線到藍牙鍵盤 然後指示燈會轉為穩定藍燈 5 秒鐘, 指明已建立連線 例如, 若某裝置與藍牙 2 鍵配對, 按下該鍵即可讓藍牙鍵盤與該裝置搭配使用 注意 : 一次只能啟動一個裝置 繁體中文 17
電池充電充電三小時最高可維持 10 天的使用時間, 這是以在開啟背光下每天打字兩小時的使用量計算, 如果未開啟背光, 則大約可使用一年 充電時仍能使用藍牙鍵盤 若要查看電池電量並對鍵盤充電, 請執行下列步驟 : 1. 開啟藍牙鍵盤電源 電池狀態燈閃爍綠燈 : 電池有充足的電量 電池狀態燈閃爍紅燈 : 請為電池充電 移至步驟 2 USB 2. 使用微型 USB 充電連接線將藍牙鍵盤連接到電腦 電池狀態 指示燈會穩定閃爍綠燈 充電 1 到 3 小時, 或是直到電池狀態指示燈熄滅為止 注意 : 如果電池電量非常低, 則會停用鍵盤的背光功能, 且電池狀態指示燈會閃爍紅燈 18 繁體中文
造訪 產品中心 您的產品還有更多產品相關資訊與支援 請抽空造訪 產品中心, 深入瞭解您的新藍牙鍵盤 請瀏覽線上文章, 瞭解設定說明 使用秘訣, 或是其他功能的相關資訊 如果您的藍牙鍵盤隨附選用軟體, 您可以深入瞭解軟體優點及該軟體如何協助您自訂產品 您還可以和 社群論壇 中的其他使用者保持聯繫以獲得建議 提出問題, 以及分享解決方案 Logitech Bluetooth Illuminated Keyboard K810 產品中心 提供各式各樣的精采內容 教學課程 疑難排解 支援社群 軟體下載 線上文件 保固資訊 備用零件 ( 如有提供時 ) 請瀏覽 www.logitech.com/support/k810 繁體中文 19
使用產品 1 2 3 4 5 6 7 8 9 功能鍵與媒體鍵 1. 藍牙鍵 1 2 和 3 最多可與三個相容裝置配對 2. 應用程式切換循環切換開啟的應用程式 3. 降低 (F5) 與調高 (F6) 鍵盤背光強度 4. 播放 / 暫停 5. 靜音 6. 音量減小 7. 音量增大 8. 首頁 9. 多功能鍵小算盤僅適用於 Windows 顯示 / 隱藏虛擬鍵盤僅適用於 ios F 功能鍵 :F1 至 F12 若要在 Windows 中使用此功能, 請按住 Fn 鍵, 然後按下某個 F 功能鍵 可自訂為搭配選用軟體 請參閱 適用於 Windows 的軟體 20 繁體中文
適用於 Windows 的軟體下載並安裝可使用 F 功能鍵的羅技軟體, 並可進行自訂與指定背光設定 請瀏覽 www.logitech.com/support/k810 鍵盤背光鍵盤感應器會偵測您的手部位置來開啟和關閉背光 背光會依照房間的明亮程度自動進行調整 當光線明亮或是電池電量不足時, 背光功能會關閉, 這有助於節省電池電力 在明亮的光線下時,F5 和 F6 鍵會無法使用 自動背光控制功能會在您使用 F5 或 F6 鍵調整背光強度時關閉 關閉鍵盤電源再重新開啟, 即可恢復使用自動背光控制功能 如果鍵盤閒置兩小時或更久時間, 也會自動恢復此自動背光控制功能 Logitech Bluetooth Illuminated Keyboard K810 疑難排解鍵盤無法正常運作 將 On/Off 開關滑動到 Off 位置, 然後再滑動到 On 位置 如果電池狀態指示燈閃爍紅燈, 請為電池充電 如需詳細資訊, 請參閱 電池充電 移至您裝置的藍牙設定頁面檢查是否顯示 羅技 K810 如果有顯示, 請將其移除 然後依照 配對您的第一個裝置 上的步驟 2-4, 重新進行藍牙配對 如果您目前正在使用自訂的藍牙硬體與軟體, 請參閱您的產品文件以解決任何發生的藍牙問題 繁體中文 21
產品使用壽命告終時的電池棄置指南 1 2 3 4 5 6 1. 撬開鍵盤下方的外蓋並卸下 4 個螺絲 2. 撬開鍵盤上方 F 功能鍵周圍的外蓋並卸下 5 個螺絲 3. 拆開上方與下方的外殼 4. 卸下 5 個電路板固定螺絲 5. 取下電路板下方的電池連接線 從下方的電池盒中取出電池 6. 根據當地法律棄置電池與產品 22 繁體中文
제품설명 Logitech Bluetooth Illuminated Keyboard K810 1 2 3 4 5 6 7 8 1. Bluetooth 상태표시등 2. Bluetooth 키 3. 기능키 4. 배터리상태표시등 5. 켜기 / 끄기스위치 6. Bluetooth 연결버튼 7. 마이크로 USB 포트 8. 마이크로 USB 충전케이블 한국어 23
제품설정첫번째장치페어링 1. Bluetooth 키보드를켭니다. 2. Bluetooth 연결버튼을누릅니다. Bluetooth 키위의표시등이파란색으로깜빡입니다. 3. Bluetooth 키를눌러첫번째장치를해당키에지정합니다. 선택한키위의표시등이파란색으로계속깜빡입니다. Bluetooth 키보드가 15 분동안검색가능합니다. 24 한국어
4. 장치에서 Bluetooth 페어링완료 : Windows 7 및 8: a. 제어판 > 장치및프린터로이동합니다. b. 장치추가 를클릭합니다. c. 장치목록에서 Logitech K810 을선택합니다. d. 다음 을클릭하고화면설명에따라진행합니다. Apple ios(ipad 또는 iphone): a. 설정에서, Bluetooth를선택한다음 Bluetooth를켭니다. b. 장치메뉴에서 Logitech K810 을선택합니다. Logitech Bluetooth Illuminated Keyboard K810 Android a. 설정에서, 무선및네트워크 > Bluetooth 설정을선택한다음 Bluetooth를켭니다. b. Bluetooth 장치 에서 Logitech K810 을선택합니다. 참고 : 모바일장치에 PIN을입력하라는메시지가나타나면모바일장치의가상키보드를사용하지말고 Bluetooth 키보드를사용하여코드를입력하십시오. Bluetooth 키보드와해당장치가페어링됩니다. 선택한 Bluetooth 키위의표시등이파란색으로 30 초간켜집니다. Windows 의경우, 기능키를커스터마이징하거나백라이팅설정을지정하려면 www.logitech.com/support/k810 에서소프트웨어를다운로드하여설치합니다. 한국어 25
Bluetooth 키를다른장치에페어링하거나재지정하기최대세개의호환가능한장치를 Bluetooth 키보드에페어링할수있습니다. 1. 키보드가켜져있는지확인합니다. 2. Bluetooth 연결버튼을누릅니다. Bluetooth 키위의표시등이파란색으로빠르게깜빡입니다. 3. Bluetooth 키를눌러장치를해당키에지정합니다. 예를들어, 장치하나를 Bluetooth 키 1에이미지정하였으면이번에는 Bluetooth 키 2를누릅니다. 선택한키위의표시등이파란색으로계속깜빡입니다. 키보드가 3분동안검색가능합니다. 4. 첫번째장치페어링 에나온설명처럼나머지 4단계를수행하여 Bluetooth 페어링을완료합니다. 참고 : Bluetooth 연결버튼을누르면 Bluetooth 키위에있는표시등이파란색으로깜빡입니다. 세개의 Bluetooth 키를모두지정하거나재지정할수있으며, Bluetooth 키보드가 3분동안검색가능합니다. 26 한국어
페어링된장치간전환 Logitech Bluetooth Illuminated Keyboard K810 페어링된장치선택 : 장치와연결되어있는 Bluetooth 키 (1, 2, 3) 를누릅니다. 선택한키위의표시등이파란색으로깜빡이면서 Bluetooth 키보드에연결중임을나타냅니다. 5 초동안파란불이켜진상태로유지되어연결이설정되었음을알려줍니다. 예를들어장치가 Bluetooth 2 키와페어링된경우, Bluetooth 키보드와이장치를함께사용하려면해당키를누릅니다. 참고 : 한번에하나의장치만활성화할수있습니다. 한국어 27
배터리충전 3시간충전후에는백라이팅을켜놓은상태로최대 10일동안사용이가능합니다. 또한백라이팅없이는 1년정도사용이가능합니다. ( 하루 2시간타이핑을기준 ) 충전중에도 Bluetooth 키보드사용이가능합니다. 배터리전원을확인하고키보드를충전하려면아래의지침을따릅니다. 1. Bluetooth 키보드를켭니다. 배터리상태표시등이녹색으로깜빡입니다. 배터리가적절하게충전되었습니다. 배터리상태표시등이빨간색으로깜빡입니다. 배터리를충전합니다. 2단계를진행합니다. USB 2. 마이크로 USB 충전케이블을사용하여컴퓨터에 Bluetooth 키보드를연결합니다. 배터리상태표시등이녹색으로깜빡입니다. 1 ~ 3 시간또는배터리상태표시등이꺼질때까지충전합니다. 참고 : 배터리전원이매우부족할경우키보드백라이팅이비활성화되고배터리상태표시등이빨간색으로깜빡입니다. 28 한국어
Product Central 방문온라인상에서제품에대한추가정보와지원을확인할수있습니다. Product Central 에는 Bluetooth 키보드에관한자세한내용이나와있습니다. 설정도움말, 사용팁또는추가기능에관한정보를온라인을통해찾아볼수있습니다. 사용중인 Bluetooth 키보드에옵션소프트웨어가있는경우, 해당소프트웨어의이점과소프트웨어를사용한제품커스터마이징방법을알아보십시오. Community Forums 에서다른사용자들과교류하면서질문과조언을교환하고솔루션을공유할수있습니다. Logitech Bluetooth Illuminated Keyboard K810 Product Central에서는다음과같은폭넓은내용을선택할수있습니다. 사용지침 문제해결 지원커뮤니티 소프트웨어다운로드 온라인문서 보증정보 예비부품 ( 해당되는경우 ) 참조 : www.logitech.com/support/k810 한국어 29
제품사용 1 2 3 4 5 6 7 8 9 기능및미디어키 1. Bluetooth 키 1, 2, 3 최대 3 개의호환가능한장치를페어링합니다. 2. 응용프로그램전환열려있는응용프로그램을순환합니다. 3. 키보드백라이팅밝기감소 (F5) 및증가 (F6) 4. 재생 / 일시중지 5. 음소거 6. 볼륨줄이기 7. 볼륨높이기 8. 홈 9. Multifunction 키계산기 Windows 전용가상키보드표시 / 숨기기 ios 전용 기능키 : F1 ~ F12 Windows 에서사용하려면 Fn 키를누른채 F 키를누릅니다. 옵션소프트웨어를사용하여커스터마이징할수있습니다. Windows 용소프트웨어 " 를참조하십시오. 30 한국어
Windows용소프트웨어 F 키를사용할수있는로지텍소프트웨어를다운로드하여설치및커스터마이징하고백라이팅도지정할수있습니다. 참조 : www.logitech.com/support/k810 키보드백라이팅키보드센서가손을감지하여백라이팅을켜고끕니다. 백라이팅은실내조명수준에따라자동으로조절됩니다. 밝은조명및낮은배터리전원은백라이팅을꺼지게하므로, 배터리전원을절약하는데도움이됩니다. 밝은조명에서는 F5 및 F6 키가비활성화됩니다. F5 또는 F6 키를사용하여백라이팅밝기를조절하는경우자동백라이팅제어가꺼집니다. 키보드를끄면자동백라이팅제어를복원할수있습니다. 키보드가두시간이상사용이되지않는상태인경우, 자동백라이팅제어가자동으로복원됩니다. Logitech Bluetooth Illuminated Keyboard K810 문제해결키보드가작동하지않음 켜기 / 끄기스위치를밀어끄기로설정했다가밀어켜기로설정합니다. 배터리상태표시등이빨간색으로깜빡이면배터리를충전합니다. 자세한내용은 " 배터리충전 " 을참조하십시오. 장치에서 Bluetooth 설정으로이동하여 Logitech K810 이있는지확인합니다. 있으면제거합니다. 그리고나서 첫번째장치페어링 의 2 4 단계에따라 Bluetooth 를다시페어링합니다. 커스터마이징된 Bluetooth 하드웨어와소프트웨어를사용할경우, 해당제품설명서를참조하여 Bluetooth 문제를해결합니다. 한국어 31
수명이다한배터리폐기 1 2 3 4 5 6 1. 키보드하단에서커버를열고 4 개의나사를제거합니다. 2. 키보드상단에서 F 키를둘러싼커버를열고 5 개의나사를제거합니다. 3. 상단과하단케이스를분리합니다. 4. 회로기판을고정하는 5 개의나사를제거합니다. 5. 회로기판하단에서배터리케이블을제거합니다. 하단케이스에서배터리를제거합니다. 6. 해당지역의법규에따라배터리및제품을폐기합니다. 32 한국어
33
34
35
www.logitech.com 2012 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Apple, ipad, and iphone are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Microsoft, Windows, and the Windows logo are trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. 620-004000.003