HX - Operation Manual MC / TC / CUT / QT HX Series(V2.x) Operation Manual for MC / TC / CUT / QT CSCAM
HX - Operation Manual MC / TC / CUT / QT 1. MDI I/O 1.1 MDI unit 1.2 (SOFT KEY) 1.3 (RESET KEY) 1.4 1.5 1.6 1.7 1.8 I/O 2. (MANUAL OPERATION) 2.1 2.2 JOG 2.3 MPG (Handle) 2.4 MANUAL ABSOLUTE ON/OFF 3. (AUTOMATIC OPERATION) 3.1 AUTO 3.2 MDI 3.3 3.4 (PROGRAM RESTART) 3.5 DNC 3.6 EDIT 3.7 3.8 (Handle Interrupt) 3.9 (Mirror Image) 3.10 / (Tool Retract / Recover) 3.11 (Retrace) 3.12 / CSCAM
HX - Operation Manual MC / TC / CUT / QT 4. (TEST OPERATION) 4.1 MACHINE LOCK 4.2 FEED OVERRIDE 4.3 OVERRIDE 4.4 (DRY RUN) 4.5 (SINGLE BLOCK) 5. (SAFETY FUNCTION) 5.1 (EMERGENCY STOP) 5.2 OVERTRAVEL / SOFT LIMIT 5.3 STORED STROKE CHECK 6. 6.1 6.2 6.3 6.4,, 6.5 6.6 LINE 6.7 (BOOK MARK) 6.8 PLAY BACK 6.9 HELP 7. 7.1 7.2 7.3 7.4 7.5 ( ) 7.6 8. 8.1 (Real TPG) 8.2 (Test TPG) CSCAM
HX - Operation Manual MC / TC / CUT / QT 9. 9.1 9.2 9.3 (F6) 9.4 (F5) 10. 10.1 10.2 10.3 11. 11.1 DNC 11.2 12. 12.1 12.2 12.3 12.4 (F1) 12.5 (F2) 12.6 (F3) 12.7 (F4) 12.8 (F5) 12.9 (F6) 12.10 (F8) 12.11 HELP (SHIFT+F12) 13. 13.1 ( ) 13.2 ( ) 13.3 13.4 13.5 CSCAM
HX - Operation Manual MC / TC / CUT / QT 14. 14.1 / (Cavity / Core) 14.2 / 14.3 14.4 14.5 14.6 14.7 / CSCAM
1.1 MDI unit 1.2 (SOFT KEY). TFT/LCD,. F1 ~ F8.,. 1.3 (RESET KEY) RESET. MDI. Full Key RESET. ESC.
. M, S, T ( 0: /1: ) 1.4,,,. 1.5 Ins Del Enter Help Cancel G.. Delete... G. PC keyboard F12.,,. PC keyboard Alt.
1.6,,, MDI,,,. PgUp PgDn,. 1.7 Space Home End Ctrl Alt Tab Control Alternate TAB.... PC Base PC Control. Cancel. PC Base PC Alt. Windows PC TAB. 1.8 I/O 1.8.1. USB MDI. USB /.
2.1 CNC POWER ON. CNC., ZRN(REF1.), JOG. JOG JOG.,. 1. POWER ON. 2. ZRN (ZERO RETURN, REF1.). 3. JOG. MC, Z. 4.. 5.. JOG
2.2 JOG JOG. ( ).. 1. RAPID. 2. Metric (mm/min) Inch (inch/min) Metric (mm/min) Inch (inch/min) 0 0 0 8 50 2.0 1 2.0 0.08 9 79 3.0 2 3.2 0.12 10 126 5.0 3 5.0 0.2 11 200 8.0 4 7.9 0.3 12 320 12 5 12.6 0.5 13 500 20 6 20 0.8 14 790 30 7 32 1.2 15 1260 50 < 1 : > < 2 : >
1. JOG. 2.. 3. JOG- JOG+. 4. RAPID. 5. (RAPID Override) 30%. 6. LIMIT (Over Travel ) O.T RELEASE. JOG JOG RAPID
2.3 MPG (Handle) MPG(Manual Pulse Generator)., X1(1 ), X10(1 X 10 ), X100 (1 X 100 ). MPG 1.( 1 MPG PM[1512~1543].) < 1 : MPG > ) 0.001mm X 1 : 0.001 [mm/pulse] X 10 : 0.010 [mm/pulse] X 100 : 0.100 [mm/pulse] 1. MPG ( Handle ). 2.. MPG X1, MPG X10, MPG X100. 3.. 4. MPG. 5..
MPG JOG RAPID
2.4 MANUAL ABSOLUTE ON/OFF Manual Absolute ON/OFF,. Switch ON. OFF shift. Manual Absolute ON/OFF. N1 G90 G01 X100. Y100. F100 N2 X200. Y200. N3 X300. Y250. : ON : OFF 1) N1, (X +20, Y +100.), Cycle Start N2. (220, 300) (300, 250) (120, 200) (200,200) : ON : OFF (100, 100) 2) Feed Hold N1 Feed Hold, (Y +70.), Cycle Start N2
. (200,270) (300, 320) (300, 250) (120, 200) (200,200) : ON : OFF (120, 130) 3) 1 1. N1 G90 G01 X100. Y100. F100 N2 X200 Y200. : X +20, Y +70 N3 X300. N3 Y300. (320, 370) (300, 300) (220,270) (320, 270) : ON (200,200) (300,200) : OFF (100, 100) 4) OFF.
3.1 AUTO ( ), Cycle Start, AUTO, Cycle Start Lamp. AUTO Feed Hold AUTO., Cycle Start. RESET AUTO, RESET. 1. AUTO. 2. F8. 3.. ( Enter) 4. Cycle Start, AUTO Cycle Start Lamp. AUTO
Cycle Start Lamp. 5. AUTO. AUTO Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. AUTO, AUTO Reset.,. AUTO AUTO NC Program. 1. 1. 2.. 3.. 4.. 5.,. (buffering). 6.,. 7. 4,5,6 AUTO. AUTO AUTO. M00(Program Stop), M01(Optional Stop) M02, M30 (Program End). Feed Hold.
Program Stop (M00) M00, AUTO.. Single Block Modal, Cycle Start AUTO. Optional Stop (M01) M00 M01, AUTO., Optional Stop ON. Program End (M02, M30) Main Program M02 M30, AUTO. M30, M02. Main Program M02 M30 82016 (M02, M30.). Feed Hold AUTO Feed Hold, AUTO. MDI Panel, AUTO.. Option Block Skip(= Block Delete) Optional Block Skip ON / (slash). /
. /, 82017 (.). / ON. Optional Block Skip /. 10 /0 ~ /10., /0 /. AUTO
3.2 MDI MDI, MDI Program,. Test,, feed. MDI MDI (, F9). 1. MDI. 2. Program Program.. 3. Program Cursor.. Cycle Start. Program. 4. Program End(M02, M30), Program ( ). AUTO. 5. M99, Program.
6. MDI. MDI Feed Hold, Feed Hold Lamp, Cycle Start Lamp.,.,. Dwell, Dwell. M, S, T. Feed Hold Lamp Cycle Start,. MDI MDI Panel,.,. 7. MDI, AUTO AUTO. Program MDI Program. PA[3] MDI 0, MDI MDI. PA[3] 1 MDI POWER OFF. F7.
MDI Cursor. MDI Program MDI Program. 1. MDI,. 2. MDI. 3. MDI. MDI
3.3 LAN. PC AUTO. 1. F8. 2.. ( 7 ) 3. PC. 4. PC NC. 5. AUTO AUTO Cycle Start. 1. AUTO. (=AUTO )
3.4 (PROGRAM RESTART) AUTO RESET,,.. 1. MDI,, Feed Cycle Start. 2. EDIT. F7 UTILITY. 3. MDI (G54 ~ G59), Feed, G code. 4. AUTO, Cycle Start. 5. EDIT RESET. RESET AUTO RESET,.( PI[133] ) (0), (1), (2) 3. PI [133] 0 : RESET., /. MDI Feed Cycle Start, AUTO Cycle Start..
1 : 2 : RESET.. EDIT Word AUTO Cycle Start. RESET. Cycle Start. 1. RESET, Feed. AUTO
3.5 EDIT EDIT AUTO AUTO.. 1. EDIT. 2. AUTO Feed Hold EDIT. 3. (PA[323]) 0. 4. (PA[323]) 1 F3. 5. F3 6. Background AUTO loading.
1. EDIT (Background Edit). 2. EDIT RESET. 3. EDIT AUTO Cycle Start. EDIT
3.7. 1..( F5 F6 ) 2.. 3.. 4. /. 5. AUTO. 6. Cycle Start. 7.. 8. RESET EMG-STOP.. Cycle Start. 9. RESET /.
10... 1. MDI. Input.. 2.. Enter.. 3... F2..
F3.. F4.. F5.., F6 / F7.
. F8 /. : F8. Ladder
3.8 (Handle Interrupt) AUTO MPG. (Handle Interrupt) AUTO (Handle Interrupt) ON, MPG. 1. MPG MPG (x 1, x 10, x M, x N), MPG... Interlock Mirror Image Interlock. Interlock ON,. Mirror Image. Mirror Image ON, Plus(+) Interrupt. Data.
(Absolute) (Relative) (Machine) (=Absolute )..., Page Up Key. Clear RESET, (M30, M02), (G54~G59) 0.
3.9 (Mirror Image) Mirror Image ON AUTO Mirror Image. 1. Single Block, AUTO. Mirror Image. 2. Mirror Image. 3. AUTO, Cycle Start AUTO. Mirror Image Maker. Mirror Image G code Mirror Image (G51). 1., Cycle. 2. AUTO Mirror Image G00, G01, G02, G03, G31.x. ) (Mirror Image) G51, ( PI[149], PI[108~116]) G51.( factor (Mirror Image).)
3.10 / (Tool Retract / Recover) AUTO / 1. AUTO [ ] ON. AUTO AUTO. &. 2.. JOG, MPG. 3. 1. 2. 4. 1, 10 point.,. 10.
1.,. 2., AUTO [] ON. DRY RUN. 3. 10 point,.(single Block ) 4., Feed Hold. 5. Cycle Start. 2. RESET Data,. / TLMODL [F64.08] TLESCL [F64.09] TRRTN [G79.11] HIGH. TLRTNL [F64.0A]
TLESC [G] TLMODE [F] TLESCL [F] TLRTN [G] TLRTNL [F]
3.11 (Retrace) AUTO [ ] Program. Program. 50. ON/OFF RVS ( ) [G39.8] RVSL ( ) [F30.8] AUTO
3.12 / PLC Custom Macro,. / AUTO.,. 1. AUTO M code( ).( 4 ) 2. AUTO RESET EMG-STOP. 4 #8064 = #6205 #8065 = #6206 M99
4.1 MACHINE LOCK.. 1. MACHINE LOCK ON. 2.. 3.. 1. MACHINE LOCK M, S, T. 2. MACHINE LOCK.( Maker ) 3. MACHINE LOCK ON MACHINE LOCK OFF. 4. MACHINE LOCK OFF.
4.2 FEED OVERRIDE Feed 0% 250% 10%. FEED OVERRIDE. Maker 32 OVERRIDE. 1. FEED OVERRIDE %. 1. FEED OVERRIDE (100%) Feed. 2. OVERRIDE CANCEL ON FEED OVERRIDE 100%.
4.3 OVERRIDE 0%, 25%, 50%, 100%. Maker 32 OVERRIDE. 2. 1. RAPID %. 2. OVERRIDE. G00 G27,G28, G30
4.4 (DRY RUN). DRY RUN JOG. 1.. 2. DRN(DRY RUN) ON. 3. DRY RUN. 4..
4.5 (SINGLE BLOCK) AUTO, DNC MDI. PI[83] PI[84]. 1. SBK(Single Block) ON. 2. Cycle Start. 3. Cycle Start. 4.. 1 2 6 3 5 4
5.1 (EMERGENCY STOP). 1. EMERGENCY STOP. 2... PLC. 3. EMERGENCY STOP.
5.2 OVERTRAVEL / SOFT LIMIT SOFT LIMIT stroke stroke OVERTRAVEL. SOFT LIMIT stroke stroke SOFT LIMIT. SOFT LIMIT. SOFT LIMIT 2. (PM[3378 ~ 3409], PM[3410~3472] ) SOFT LIMIT OVERTRAVEL. 1. OVERTRAVEL O.T RELEASE JOG MPG stroke. 2. SOFT LIMIT stroke.
5.3 STORED STROKE CHECK (Stored Stroke). /. 2 (PM[3474], PM[3475] /, PM[3476~3481] ), G22 X_ Y_ Z_ I_ J_ K_, G23. 1. / 0 1,. 2. G22 X_Y_ Z_ I_J_ K_. 3. G22. 4.,.
6.1. 1. F3. 2. F3. 3.,. (.NC), NC.
4. F1. 5. ENTER,.
1 EDIT _AUTOSAVE.NC NC., AUTO loading. 2 1. 5MB (CE 3MB). 2.,. TAB. 3..
6.2.,. F2. 1. F2... 1 ( )... 2. F4..
3.. F1 ( )..(.) 2 ( ).
6.3,.,. 1.,,,. G00 X100 (Y20).. G00 Y20 X100 2.,,,. G00 Y20 X100 DEL. G00 Y20 100 3. Windows Ins, Ins Insert.
6.4,,,,,. WINDOWS. 1. /. G00 X100 G01 Y10.1 Z10.3 SHIFT,,, Page Up, Page Down. ( Drag.) G00 X100 G01 Y10.1 Z10.3 SHIFT. 2. 2. G00 X100 G01 Y10.1 Z10.3, DEL. 3.
2. G00 X100 G01 Y10.1 Z10.3 Ctrl C. 4. 2. G00 X100 G01 Y10.1 Z10.3 Ctrl X. Z10.3 5.,,,. G00 X100 G01 Y10.1 Z10.3 Ctrl V. G00 X100 G01 Y10.1 Z10.3 G00 X100 G01 Y10.1
6.5,. ENTER.. 1 ( ) 1. UTIL >> F7, F1. 2.. ENTER.(.) CANCEL
RESET. 3. (Space ) /. 2 ( ) 1. UTIL >> F7, F2. 2.,., TAB, ENTER. TAB ENTER..
3. (Space ) / /. 4...,... Ctrl,,,.
6.6 LINE. 1. UTIL >> F7, F3.. 2. ENTER.
6.7 (BOOK MARK). 1. UTIL >> F7. Ctrl F4... 2., Ctrl F4. (, Toggle.) 3. F4. 4. Shift F4.
6.8 PLAY BACK 1. JOG MPG. 2.. X 3. PLAY BACK Play Back.. X0.000 4. 2 3. X0.000 Y-100.000 Z-50.000
6.9 HELP 1. G code G code MDI HELP G code HELP. 2. G code HELP F2 G code. 3. HELP /Help htm. G code HELP. 4. G code HELP G01 1001.htm. G02 1002.htm. 5. M code 2000.htm
. 6. M code MDI HELP M code HELP.
7.1.. AUTO. 1. F8. 2. NC 20. NC. 3.,. (comment). 4. Enter ( ). 5. NC. Enter,... NC NC DIR.
6.
7.2.,,. 1. F8. 2.,,,. 3. F1, F2.. 4.. ( F7 ) F4. 5.. 6. R S. C.. (.NC ) Enter.
7.3. 1. F8. 2.,,,.. 3. F3. 4. Y/N. Y, N 5. Y. 6. AUTO.
7.4. 1. F8. 2.,,,.. 3. F5. 4..( ) Enter. 5..
7.5 ( ).,. 1. F8. 2.,,,.. 3. F6.. Enter..NCT
8.1 (Real TPG).. MDI. HMI PP[20] TPG (0: /1: /2:NCT ). NC..(:, :, : ), (PA[409] Real TPG : ), (PA[407] Real TPG ) (PA[408] Real TPG ).
1. F1. 2. AUTO DNC, F1.. (.) 3.. : PgUp.(.) : PgDn. (.) Zoom All : ZoomAll F5.. View : View F3.. XYZ, XY, YZ, ZX 4 View. () :. View F4.
.,,,. ENTER, View F4. ( ) :,.,,,.(
.) : F7. 4... (.).., F7 () clear.
8.2 (Test TPG).,. MLK(Machine Lock). M(M02, M03 ), S, T.. 2. F1. 3.,. 4.. : PgUp.( drag In) : PgDn. ( drag Out)
Zoom All : ZoomAll F5. View : View F3.. XYZ, XY, YZ, ZX 4 View. () : 8.1. :,.,,,. : F7. 5. F1. F2... F6. 8.1 ).
9.1 (F1). 130. 130. 1. F6. 2.. 3.. :. : G_ : PLC, F_ :.. : : : 4. 130 13 10. PgUp PgDn. 5. :
. F2..
9.2 (F8), /. 5. 1. F6, F8. 2... 3.,.. : 1111,. : 8989. : 407.
9.3 (F6) Password. (X, Y, G, F, R, T, C, D).. F1, F2, TAB.
. Enter(Input) Key,,... S : 0~31 bit 1. Bit 16 hexadecimal). R : 0~31 bit 0 clear. Bit 16 (hexadecimal). D : 10. H : 16 (hexadecimal). Enter(Input) Key ENTER.
USER User. F4 USER., X5, G5, G8, X-Y X 0005 F4 User, G5,G8., USER., USER F4. USER HX clear.
9.4 (F5) 1. Timing Chart Servo Graph 8. 1. Plot. Plot Mode. / /. Trigger Rising Time. Plot Plot. Servo Graph Mode PLC Timing Chart Mode. Plot, X, Y Grid,.
CUR/SEL Cursor. Plot.. F1, F2,. 2. Mode (1) Servo Graph Mode Feed,..
(2) PLC Timing Chart Mode PLC ON/OFF Timing. Bit Data ON/OFF Data. Data.. Auto Scale, Y Scale. 3. / (F1). / Config. / (F2) Data /. / HX.
Auto Scale (F3) Scale. Auto Scale Config Y Zoom Step 1/5. PLC Timing Chart Mode. CUR/SEL (F4) Plot. CUR/SEL, Plot. ( ) Plot. X Zoom (F5) Plot., CUR/SEL ( ). CUR/SEL. CUR/SEL Cursor Select. Cursor X- Zoom Cursor Plot. CUR/SEL.
Config (F6) Config. Plot,. Config HX Config.txt. Mode Select Server Graph Mode PLC Timing Chart Mode Mode. X Grid Plot X Grid. Y Grid Plot Y Grid. Y Zoom Step.. Map Name Map. Number Map. Start Bit
Map. bit Hex-decimal. End Bit Map. bit Hex-decimal. Scale. Plot. Use. Tirgger (F7) Tirgger. Trigger Rising Time. Tirgger Trigger. Trigger. Rising Edge, Falling Edge, Level. Value Trigger. Ch
Trigger Channel. Rising Time Rising Time. Rising Time. First Val Rising Time. Second Val Rising Time. (F8) Plot. Auto Scale Y Scale. Sclae Move (, )..
10.1.. 1),, 1, 2 2),,, I/O,, HMI. (TAB), F1,F2. PageUp/PageDown.,,,..,.
F1 ( ), F2 ( ).
10.2 NC. TPG DNC. 1 2.. H/W.. G code / M code.. 32. I/O In/Out. I/O ID I/O.
. Laser Z gap Trace Sensor. Quilting. HMI HMI(Human Machine Interface).,. ) 32, (F3, F4)..
10.3. F6. 1. Map Name. 2. Tab Index.. ENTER. 3., PS map (1 ~ 32 ).
1... 2.. 3..(, )
11.1 DNC RS232C COM1 PC. 1. ( F4 ). :. COM1, COM2.. Baudrate :. 1200 19200,. 9600. Parity Bit :. ISO Even. Data Bit :. ISO 7 Bits. Stop Bit : 1. 1 Bit. EOT Code : End Of Transmission.. 0x14 (DC4).
,. FLOW CTRL : / X-ON/X-OFF. ( DC1, DC3.) / EOB (End Of Block) LF. X-ON.
2. 1. DNC. <DNC >.... 1. 1. 1... <DNC > 2. F3.
3.. ( ) NC.. NC DIR. 4.,, ENTER. 5.. 6.., F5. F8. ( X-ON.) 7. Serial (, ),. F8. Error.
8..
3. 1. DNC. <DNC >... 0.... 1.. 1... 2. F3.
3.. 4. ENTER. (). 5. F5. F8. ( X-ON.) 6. Serial (, ), EOT ( EOT, ). Error.
11.2. 3. 1.., ( MDI ) ENTER.. 2. 1., F6 F7, F4 F5.
3., / F8. ( F8.) 4.. 5. Cycle Start.
12.1 (F9), (F10)., MDI MDI, DNC. 1.,,. F1 F1 F2 Offset F8 F2 F8 F3 F4 F5 F6 F7 USER DEFINE F8 F1 DNC F6 F1 F4 F5 F6 F7 F7 F8 F8
2. ( ) F1 F2 F1 F2 F3 F4 F8 F3 F8 F4 F5 F1 DNC F6 F6 F1 F4 F7 USER DEFINE F8 F5 F6 F7 F7 F8
12.2 1. HX-Series.,,,,,. 2. PG :. PG :.. 3.. DNC, EDIT, AUTO, MDI, JOG, MPG, STEP, ZRN. 4.. ON. 5.,,.
12.3 (, F9). Page Down., Feed,. 1.,. (,, ) Feed, Spindle Override,. (F9) 1.
2. (,,,, ) Feed, Override,. G code 1 Page Down. DNC.
12.4 (F1). (F1)..,,. View F3. View F4. ZoomAll F5 /. F7. F8. 8.
12.5 (F2),,. 13.. ( ),. 64.
. ( ) (GX, GZ) (WX, WZ),. 64. (U_, W_).
. G54~ G59 (Shift),. 13.
. 120 ( ),.
. (F2 F8) (#100~#199) (#200~#699). GLOBAL #100 ~ #199 100. (RESET POWER OFF 0 clear.) GLOBAL #200 ~ #699. (POWER OFF ), F8.
12.6 (F3). (F3) NC.,, Feed,.,. F8. 6.
. (F3 F8) Simulation. F1 F2 F6 Simulation,,. View F3. View F4. ZoomAll F5 /. F7. 8.
12.7 (F4). (F4) System.,, 1, 2,,,, I/O,, HMI 10. ( ), F1 F2. 32., F3 F4. (,.) F7. 1. F8 SERCOS interface. 10.
12.8 (F5) DNC. (F5 F1) RS 232C NC. 11.
. (F5 F6). 3.
12.9 (F6). (F6 F1),. 130.. PgUp PgDn 10. : G_ F_ PLC. (G_00000: PLC, F_xxxxx : )
. (F6 F4) Monitoring. 1. 1, 2,, 4,. Read-Only.. ( ), F1, F2.
. (F6 F5)
.(F6 F6). X-Y, G-F, R, T, C, D 6, USER., MDI F1 F2. USER USER / F4.. USER. USER USER F4..
(Ladder). (F6 F6 F7). Ladder., - -., X100 11, X100.0A. 16 (HEXA-Decimal) 2. ENTER.
. (F6 F7) HX.
. (F6 F8).., 9. HX. (F2)
12.10 (F8). (F8). Shell (,, ).,,... 7.
. (F8 F8) Cavity Core. HX NC COCA. 13.
12.11 HELP (SHIFT+F12)
13.1 ( ) 64.. Shift. 1. F2. 2.. ENTER. 3. : 1 64. 0.
4. : (0-9). / 3, 2. 5. GX : X X. I -30 I [+ (-30) ]. X 0 clear. 6. GZ : Z. GX. Z 0 clear. 7. :. 8. Z Shift : Z. Z.. Shift Z. 9. :, 0 Shift, 1.
N1 T0101 N2 G0 X60.Z0. N3 G1 Z-10. F0.1 N4 G0 X70. Z100. N5 T0202 N6 G0 X70. Z50., 1 GX : 0., GZ : 0. 2 shift 60 (70,50) (70,100)->(70,90) N5 (70,90) 1 (70,100) (70,50) (70,100) 2 N5 X 5mm, Z -10mm. (70,100) 1.. 2. Z (). 3. GZ [I0] [INPUT]. 4., X () Z.
5.. 6. GX. 7. GX, [I] [ ] [INPUT].. X. ) ( ) X X : -200.000 25.000( - : ) GX :-175.000-25.000( + : ) GX :-225.000 Z Z : -150.000 0 GZ :-150.000
13.2 ( ) 64.,.., (U, W )..
13.3 G54 G59.. (G54 ~ G59). 0: /1: RESET RESET.,. Shift. 1. F2. 2.. 3. G54 ~ G59 Enter. 4. G54 ~ G59, I
,., I10 10.. 5. Shift,. 6... (0, 0, 0), 0 Enter. (X,Y,Z) (X,Y,Z) (X,Y,Z) G54 G59 Shift (X,Y,Z) Shift Shift
7. Shift Shift. Shift, (G54~G58) (G92) Shift. Shift (1) Shift (0) 0 1 Enter. G54 G54 ~ G59
13.4 F2, F2. Enter.
13.5 NC.,.. RESET clear. F2, F8.,, F8. Enter. #100 ~ #199 100, #200 ~ #699 500.
14.1 / (Cavity / Core) 2.5 / 2.5 / NC. HX NC CNC. / F3. / F4,. / F5. F6 NC. NC \NC\CoCa\
14.2 / /. (Profile Curve) 1 ~ 6.. 1 ~ 6..,...,, Z 1. F5 /..., Enter.
14.3 F4 / 2.5.. 1) [ Pocket Milling ], NC. : X : Y : : X - Y 2) [ Pocket Milling ], NC. :.
3) [ X0, Y0, Z0 ]. : X. : Y. : X X. 4) Y Y Y X NC. (.) : Y : X : : X X.
14.4 2.5..,,, - -, -,. 1) pocket [ Core ]. : mm. :. 2). [ ]. :. :. :.
3). [ ]. :. :. :. 4). :. 1 :. :. 2 :.
5).. :. :. 1 :. 2 :. 6).. :. :. 1 :. 2 :
14.5 1) [ Cavity ] [ Core ]. :. : 2) Z-X Z - X [ 1 ] [ 2 ]. : [Y ]. 1 : X 0 [ ] 2 : X [ ]
3) X - Y. ( /.) :. : X. Y : Y Offset. : Y. :. : X-Y. 4). ( /.) : X 0. : :. : :
14.6,, [ ] NC Code. [ Feed-Rate ], [ RPM ] 1. F5 /.. 1) [Flat End Mill] End Mill, 2 4.. :. FEED :. :. : 1. : Step-Over.. 2) [Ball End Mill] End Mill,..
:. FEED :. :. : 1. : Step-Over 3) [Null End Mill] End Mill Champer,. 1 :. 2 :. FEED :. :. : 1. : Step-Over.
14.7 /