Isolators and Circulators - PDF 무료 다운로드

Isolators and Circulators between 88 MHz and 40 GHz Thermal Management Industrial Components Test & Measurement RF & Microwaves Aviation Engineering & Service we provide solutions!

Content Coaxial 4 Frequency from 790 MHz to 40 GHz Narrow bandwidth up to octave plus bandwidth Connectors for standard models are SMA fernale and termination load for an isolator is 1 W High power up to 500 Watts or low loss < 0.15 db is available Phase matching, EMI or RF shielding is available upon request Customized design is available with specific frequency, configuration, electrical specification, connector type or termination load up to 150 Watts Drop-In 12 Frequency from 300 MHz to 26,5 GHz No NdFeB magnets Small and miniature size or surface mounted tab is available High power up to 500 Watts or low loss < 0.15 db is available Standard package is nickel-plated finished with gold-plated tab Customized design is available with specific frequency electrical specification or termination load up to 100 Watts Flange Mount Drop-In 14 Frequency from 800 to 26,5 GHz No NdFeB magnets Small package size and light weight with high performance Customized design is available for specific frequency, electrical specification, or termination load up to 100 Watts Lumped Coaxial 18 Frequency from 50 to 500 MHz No NdFeB magnets Connectors for standard models are N female Termination load for standard models is 10 Watt Standard models are nickel-plated finished Customized design is available for specific frequency configuration, electrical specification, connector type or termination load up to 100 Watts Drop-In Lumped 20 Frequency from 800 to 1000 MHz No NdFeB magnets Termination load for standard models is 5 Watt Finish nickel-plated Customized design is available for specific frequency range, specification or direction of circulation 3

Coaxial Coaxial Model Number Description 4

Coaxial Coaxial Frequency from 790 MHz to 40 GHz Narrow bandwidth up to octave plus bandwidth Connectors for standard models are SMA fernale and termination load for an isolator is 1 W High power up to 500 Watts or low loss < 0.15 db is available Phase matching, EMI or RF shielding is available upon request Customized design is available with specific frequency, configuration, electrical specification, connector type or termination load up to 150 Watts Standard Narrow Bandwidth Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW C10-1FFF C10-1L1FF 0.79 0.88 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 C11-1FFF C11-1L1FF 0.840 0.935 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 C12-1FFF C12-1L1FF 0.88 0.95 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 C13-1FFF C13-1L1FF 0.90 0.93 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 C14-1FFF C14-1L1FF 0.90 1.50 16 0.9 1.45 0 to +55 100 50 70 x 70 x 22 320 C15-1FFF C15-1L1FF 0.91 0.92 23 0.5 1.15-54 to +85 500 50 32 x 34 x 19 90 C16-1FFF C16-1L1FF 0.91 1.05 18 0.6 1.35-54 to +85 500 50 32 x 34 x 19 90 C19-1FFF C19-1L1FF 0.930 0.965 23 0.5 1.15-54 to +85 500 50 32 x 34 x 19 90 C20-1FFF C20-1L1FF 0.95 1.00 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 C31A-1FFF C31A-1L1FF 0.825 0.905 20 0.5 1.25-54 to +85 500 50 37 x 40.5 x 24 150 D10-1FFF D10-1L1FF 0.95 1.05 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D12-1FFF D12-1L1FF 1.0 1.1 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D13-1FFF D13-1L1FF 1.03 1.09 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D14-1FFF D14-1L1FF 1.2 1.4 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D15-1FFF D15-1L1FF 1.2 1.6 23 0.5 1.15 0 to +55 100 50 60 x 60 x 22 260 D16-1FFF D16-1L1FF 1.3 1.5 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D17-1FFF D17-1L1FF 1.35 1.85 20 0.5 1.25 0 to +55 100 50 60 x 60 x 22 260 D18-1FFF D18-1L1FF 1.4 1.54 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 D19-1FFF D19-1L1FF 1.4 1.6 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D20-1FFF D20-1L1FF 1.4 1.8 18 0.6 1.30-54 to +85 500 50 32 x 34 x 19 90 D21-1FFF D21-1L1FF 1.4 2.5 17 0.5 1.35 0 to +55 100 50 60 x 60 x 22 260 D22-1FFF D22-1L1FF 1.5 1.7 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D23-1FFF D23-1L1FF 1.54 1.74 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D24-1FFF D24-1L1FF 1.6 1.8 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D25-1FFF D25-1L1FF 1.625 1.650 23 0.4 1.15-54 to +85 500 50 32 x 34 x 19 90 D26-1FFF D26-1L1FF 1.63 2.30 20 0.4 1.25 0 to +55 100 50 50 x 50 x 21 190 D27-1FFF D27-1L1FF 1.65 1.85 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D28-1FFF D28-1L1FF 1.7 1.9 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 D30-1FFF D30-1L1FF 1.7 2.0 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 D31-1FFF D31-1L1FF 1.7 2.1 23 0.35 1.15 0 to +55 100 50 50 x 50 x 21 190 D32-1FFF D32-1L1FF 1.7 2.1 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 E10-1FFF E10-1L1FF 1.7 2.3 23 0.35 1.20 0 to +55 100 50 50 x 50 x 21 190 E11-1FFF E11-1L1FF 1.7 2.4 23 0.4 1.20 0 to +55 100 50 50 x 50 x 21 190 D33-1FFF D33-1L1FF 1.8 2.0 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 D34-1FFF D34-1L1FF 1.8 2.1 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 E12-1FFF E12-1L1FF 1.9 2.1 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 E13-1FFF E13-1L1FF 1.9 2.3 20 0.5 1.25-54 to +85 500 50 32 x 34 x 19 90 E14-1FFF E14-1L1FF 2.0 2.3 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 E15-1FFF E15-1L1FF 2.0 2.5 20 0.4 1.25-30 to +70 250 50 41 x 42 x 20 120 E16-1FFF E16-1L1FF 2.0-3.0 20 0.5 1.25-30 to +70 250 50 41 x 42 x 20 120 5

Coaxial Standard Narrow Bandwidth Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW E17-1FFF E17-1L1FF 2.1 2.4 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 E18-1FFF E18-1L1FF 2.1 2.3 23 0.3 1.15-10 to +55 250 50 41 x 42 x 20 120 E19-1FFF E19-1L1FF 2.1 2.3 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 E20-1FFF E20-1L1FF 2.2 2.3 23 0.4 1.15-54 to +85 250 25 32 x 34 x 19 90 E21-1FFF E21-1L1FF 2.2 2.3 20 0.5 1.25 0 to +55 250 25 25 x 25 x 13 45 E22-1FFF E22-1L1FF 2.3 2.5 23 0.4 1.15-54 to +85 250 25 32 x 34 x 19 90 E23-1FFF E23-1L1FF 2.3 2.5 20 0.4 1.25 0 to +55 250 25 25 x 25 x 13 45 E24-1FFF E24-1L1FF 2.5 2.9 20 0.4 1.25-54 to +85 250 25 32 x 34 x 19 90 E25-1FFF E25-1L1FF 2.5 2.9 20 0.4 1.25-54 to +85 250 25 25 x 25 x 13 45 E26-1FFF E26-1L1FF 2.5 3.3 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 E27-1FFF E27-1L1FF 2.5 3.3 20 0.4 1.25 0 to +55 250 25 25 x 25 x 13 45 F10-1FFF F10-1L1FF 2.5 3.6 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 F11-1FFF F11-1L1FF 2.6 3.4 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 E28-1FFF E28-1L1FF 2.7 3.1 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 E29-1FFF E29-1L1FF 2.7 3.1 20 0.4 1.25 0 to +55 250 25 25 x 25 x 13 45 F12-1FFF F12-1L1FF 2.8 3.5 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 F13-1FFF F13-1L1FF 3.0 4.0 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 F14-1FFF F14-1L1FF 3.2 4.0 20 0.4 1.25 0 to +55 250 25 32 x 34 x 19 80 F15-1FFF F15-1L1FF 3.4 4.2 23 0.4 1.15 0 to +55 250 25 25 x 29 x 18 50 F16-1FFF F16-1L1FF 3.45 4.45 22 0.4 1.15 0 to +55 250 25 25 x 29 x 18 50 F17-1FFF F17-1L1FF 3.5 4.2 23 0.4 1.15 0 to +55 250 25 25 x 29 x 18 50 G10-1FFF G10-1L1FF 3.6 6.5 20 0.4 1.25 0 to +55 250 25 25 x 29 x 18 50 F18-1FFF F18-1L1FF 3.625 4.200 25 0.3 1.15-30 to +70 250 25 25 x 29 x 18 50 F19-1FFF F19-1L1FF 3.7 4.2 25 0.3 1.15-30 to +70 250 25 25 x 29 x 18 50 G11-1FFF G11-1L1FF 4.0 4.6 20 0.4 1.25-30 to +70 250 25 25 x 29 x 18 50 G12-1FFF G12-1L1FF 4.0 5.0 20 0.4 1.25-30 to +70 250 25 25 x 29 x 18 50 G13-1FFF G13-1L1FF 4.0 6.0 20 0.4 1.25-30 to +70 250 25 25 x 29 x 18 50 G14-1FFF G14-1L1FF 4.2 4.5 25 0.4 1.15-30 to +70 250 25 25 x 29 x 18 50 G15-1FFF G15-1L1FF 4.3 5.5 25 0.4 1.15-30 to +70 250 25 25 x 29 x 18 50 G16-1FFF G16-1L1FF 4.4 5.0 20 0.4 1.25-30 to +70 250 25 21 x 21 x 13 35 G17-1FFF G17-1L1FF 4.4 5.5 25 0.4 1.15-30 to +70 250 25 25 x 29 x 18 50 G18-1FFF G18-1L1FF 4.4 6.5 20 0.4 1.25-30 to +70 250 25 25 x 29 x 18 50 G19-1FFF G19-1L1FF 5.0 6.0 23 0.4 1.15-54 to +85 250 25 25 x 29 x 18 50 H10-1FFF H10-1L1FF 5.0 7.0 20 0.4 1.25-54 to +85 250 25 25 x 29 x 18 50 G20-1FFF G20-1L1FF 5.3 6.0 23 0.4 1.25-54 to +85 250 25 25 x 29 x 18 50 H11-1FFF H11-1L1FF 5.7 6.8 20 0.4 1.25-54 to +85 250 25 25 x 29 x 18 50 H12-1FFF H12-1L1FF 5.8 6.5 20 0.4 1.25-30 to +70 250 25 19 x 24 x 17 45 H13-1FFF H13-1L1FF 5.8 8.6 20 0.4 1.25-30 to +70 250 25 19 x 24 x 17 45 H14-1FFF H14-1L1FF 6.0 8.0 20 0.4 1.25-54 to +85 250 25 19 x 24 x 17 45 H15-1FFF H15-1L1FF 6.0 9.0 20 0.4 1.25-54 to +85 250 25 19 x 24 x 17 45 6

Coaxial Standard Narrow Bandwidth Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW H16-1FFF H16-1L1FF 6.5 7.2 20 0.4 1.25-54 to +85 250 25 19 x 24 x 17 45 H17-1FFF H17-1L1FF 6.55 7.85 20 0.4 1.25-54 to +85 250 25 19 x 24 x 17 45 H18-1FFF H18-1L1FF 7.0 8.5 20 0.4 1.25-54 to +85 250 25 19 x 24 x 17 45 H19-1FFF H19-1L1FF 7.0 8.5 20 0.4 1.25-30 to +70 250 25 16 x 21 x 17 26 H21-1FFF H21-1L1FF 7.0 9.0 20 0.4 1.25-30 to +70 250 25 16 x 21 x 17 26 I11-1FFF I11-1L1FF 7.0 11.0 20 0.5 1.25-30 to +70 250 25 16 x 21 x 17 26 I12-1FFF I12-1L1FF 7.0 12.0 17 0.6 1.35-30 to +70 250 25 16 x 21 x 17 26 H23-1FFF H23-1L1FF 7.1 7.8 20 0.4 1.25-54 to +85 250 25 16 x 21 x 17 26 H25-1FFF H25-1L1FF 7.1 8.5 20 0.4 1.25-54 to +85 250 25 16 x 21 x 17 26 H27-1FFF H27-1L1FF 7.25 7.75 23 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 I14-1FFF I14-1L1FF 7.5 9.0 20 0.4 1.25-54 to +85 250 25 16 x 21 x 17 26 I16-1FFF I16-1L1FF 7.9 8.4 23 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 I17-1FFF I17-1L1FF 8.0 11.0 20 0.5 1.25-54 to +85 250 25 16 x 21 x 17 26 J10-1FFF J10-1L1FF 8.0 12.0 20 0.5 1.25-54 to +85 250 25 16 x 21 x 17 26 J11-1FFF J11-1L1FF 8.0 12.4 20 0.5 1.25-54 to +85 250 25 16 x 21 x 17 26 I18-1FFF I18-1L1FF 8.4 9.7 23 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 I19-1FFF I19-1L1FF 8.4 10.0 23 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 I20-1FFF I20-1L1FF 9.0 10.0 23 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 J19-1FFF J19-1L1FF 9.0 12.0 20 0.5 1.25-54 to +85 250 25 16 x 21 x 17 26 K10-1FFF K10-1L1FF 9.0 17.0 18 0.7 1.30-54 to +85 250 25 16 x 21 x 17 26 J20-1FFF J20-1L1FF 9.5 10.5 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J21-1FFF J21-1L1FF 9.5 12.4 23 0.5 1.20-54 to +85 250 25 16 x 21 x 17 26 J22-1FFF J22-1L1FF 9.6 10.2 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J23-1FFF J23-1L1FF 9.7 12.0 20 0.4 1.15-54 to +85 250 25 16 x 21 x 17 26 J24-1FFF J24-1L1FF 10.0 12.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K11-1FFF K11-1L1FF 10.0 18.0 18 0.6 1.35-54 to +85 250 25 13 x 16 x 13 20 J25-1FFF J25-1L1FF 10.2 12.4 23 0.4 1.15-54 to +85 250 25 13 x16 x 13 20 J26-1FFF J26-1L1FF 10.5 11.5 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J27-1FFF J27-1L1FF 10.7 11.7 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J28-1FFF J28-1L1FF 11.0 14.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K12-1FFF K12-1L1FF 11.0 18.0 18 0.6 1.35-54 to +85 250 25 13 x 16 x 13 20 J29-1FFF J29-1L1FF 11.7 12.7 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K13-1FFF K13-1L1FF 12.0 14.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J30-1FFF J30-1L1FF 12.2 13.2 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K14-1FFF K14-1L1FF 12.4 15.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K16-1FFF K16-1L1FF 12.4 18.0 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 K17-1FFF K17-1L1FF 12.5 13.5 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 J31-1FFF J31-1L1FF 12.6 13.2 25 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K18-1FFF K18-1L1FF 12.7 13.3 25 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 K19-1FFF K19-1L1FF 13.0 16.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 7

Coaxial Cellular Band Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW C25E-1FFF C25E-1L1FF 880 960 20 0.3 1.25-30 to +70 500 100 37 x 40.5 x 24 150 C39A-1FFF C39A-1L1FF 925 960 20 0.3 1.25-30 to +70 500 100 37 x 40.5 x 24 150 D24B-1FFF D24B-1L1FF 1710 1880 20 0.3 1.25-54 to +85 500 100 32 x 34 x 19 90 D52-1FFF D52-1L1FF 1805 1885 20 0.3 1.25-54 to +85 500 100 32 x 34 x 19 90 D26A-1FFF D26A-1L1FF 1805 1910 20 0.3 1.25-54 to +85 500 100 32 x 34 x 19 90 D29B-1FFF D29B-1L1FF 1930 1990 20 0.3 1.25-54 to +85 500 100 32 x 34 x 19 90 * Finished Nicked plated Popular Band Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW C31A-1FFF C31A-1L1FF 0.825 0.905 20 0.5 1.22-54 to +85 300 50 37 x 40.5 x 24 150 C12-1FFF C12-1L1FF 0.880 0.950 20 0.5 1.25-54 to +85 300 50 32 x 34 x 19 90 D44-1FFF D44-1L1FF 1.427 1.535 20 0.4 1.20-54 to +85 300 50 32 x 34 x 19 90 D18-1FFF D18-1L1FF 1.40 1.54 20 0.4 1.25-54 to +85 300 50 32 x 34 x 19 90 D51-1FFF D51-1L1FF 1.805 1.880 25 0.25 1.15-54 to +85 300 50 38 x 41 x 28 180 E10-1FFF E10-1L1FF 1.70 2.30 23 0.35 1.20 0 to +55 100 50 50 x 50 x 21 190 E14-1FFF E14-1L1FF 2.0 2.3 20 0.4 1.25-54 to +85 500 50 32 x 34 x 19 90 E23-1FFF E23-1L1FF 2.3 2.5 20 0.4 1.25 0 to +55 250 25 25 x 25 x 13 45 F61-1FFF F61-1L1FF 2.0 4.0 17 0.5 1.35-30 to +70 250 50 41 x 42 x 20 120 F19-1FFF F19-1L1FF 3.7 4.2 25 0.3 1.15-30 to +70 250 25 25 x 29 x 18 50 G16-1FFF G16-1L1FF 4.4 5.0 20 0.4 1.25-30 to +70 250 25 21 x 21 x 13 35 H12-1FFF H12-1L1FF 5.8 6.5 20 0.4 1.25-30 to +70 250 25 19 x 24 x 17 45 K36-1FFF K36-1L1FF 10.0 15.0 23 0.4 1.25 0 to +50 250 25 13 x 16 x 13 20 K14-1FFF K14-1L1FF 12.4 15.0 23 0.4 1.15-54 to +85 250 25 13 x 16 x 13 20 9

Coaxial Standard Octave Band Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW C64-1FFF C64-1L1FF 0.8 1.6 17 0.7 1.35 10 to +40 100 50 76 x 76 x 26 570 C60-1FFF C60-1L1FF 0.9 1.7 17 0.6 1.35 10 to +40 100 50 70 x 70 x 22 380 D60-1FFF D60-1L1FF 1.0 2.0 17 0.6 1.35 10 to +40 100 50 60 x 60 x 22 260 D61-1FFF D61-1L1FF 1.12 2.24 17 0.5 1.35 0 to +55 100 50 60 x 60 x 22 260 D62-1FFF D62-1L1FF 1.3 2.6 17 0.5 1.35 10 to +55 100 50 60 x 60 x 22 260 E60-1FFF E60-1L1FF 1.5 3.0 17 0.6 1.35 0 to +55 100 50 60 x 60 x 22 260 F60-1FFF F60-1L1FF 1.9 3.6 17 0.5 1.35 0 to +70 250 50 50 x 50 x 21 190 F61-1FFF F61-1L1FF 2.0 4.0 17 0.5 1.35-30 to +70 250 50 41 x 42 x 20 120 F63-1FFF F63-1L1FF 2.6 5.2 18 0.5 1.35 0 to +55 250 25 32 x 34 x 19 80 G60-1FFF G60-1L1FF 2.7 5.4 17 0.5 1.35 0 to +55 250 25 32 x 34 x 19 80 G61-1FFF G61-1L1FF 3.0 6.0 17 0.6 1.35-30 to +70 250 25 32 x 34 x 19 80 G62-1FFF G62-1L1FF 3.2 6.5 17 0.5 1.35-30 to +70 250 25 32 x 34 x 19 80 H60-1FFF H60-1L1FF 4.0 8.0 18 0.5 1.35-30 to +70 250 25 25 x 29 x 18 50 H61-1FFF H61-1L1FF 4.5 9.0 17 0.5 1.35 0 to +55 250 25 25 x 29 x 18 50 H62-1FFF H62-1L1FF 4.8 9.6 17 0.6 1.35-30 to +70 250 25 25 x 29 x 18 50 H63-1FFF H63-1L1FF 5.0 10.0 17 0.6 1.35-30 to +70 250 25 25 x 29 x 18 50 H64-1FFF H64-1L1FF 5.2 10.4 17 0.6 1.35-30 to +70 250 25 19 x 24 x 17 45 I70-1FFF I70-1L1FF 6.0 12.0 17 0.6 1.35-30 to +70 250 25 19 x 22 x 13 45 I77-1FFF I77-1L1FF 6.5 13.0 17 0.7 1.35-54 to +85 250 25 19 x 22 x 13 45 J60-1FFF J60-1L1FF 8.0 16.0 17 0.6 1.35-54 to +85 250 25 16 x 21 x 17 26 K60-1FFF K60-1L1FF 9.0 18.0 17 0.7 1.35-54 to +85 250 25 16 x 21 x 17 26 Standard Octave Plus Band Coaxials Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW D70-1FFF D70-1L1FF 0.98 2.05 17 0.6 1.35 10 to +40 100 20 70 x 70 x 22 380 D80-1FFF D80-1L1FF 1.0 2.6 13 1.0 1.60 10 to +40 100 20 70 x 70 x 22 380 D81-1FFF D81-1L1FF 0.9 2.0 13 0.9 1.60 10 to +40 100 20 76 x 76x 26 570 D90-1FFF D90-1L1FF 0.8 2.2 12 0.9 1.70 10 to +40 100 20 89 x 89 x 28 650 D91-1FFF D91-1L1FF 0.86 2.3 12 1.0 1.60 10 to +40 100 20 76 x 76x 26 570 D93-1FFF D93-1L1FF 0.8 2.5 12 1.0 1.70 10 to +40 100 20 89 x 89 x 28 660 E80-1FFF E80-1L1FF 1.0 3.0 13 1.2 1.60 10 to +40 100 20 70 x 70 x 22 380 F80-1FFF F80-1L1FF 1.7 4.2 15 0.9 1.50 0 to +55 250 20 50 x 50 x 21 190 F70-1FFF F70-1L1FF 2.0 4.5 16 0.7 1.40 0 to +55 250 25 41 x 42 x 20 120 G80-1FFF G80-1L1FF 2.0 6.0 13 1.0 1.60-10 to +60 250 10 41 x 42 x 20 120 G81-1FFF G81-1L1FF 2.4 5.9 15 0.8 1.45 0 to +50 250 10 41 x 42 x 20 120 G98-1FFF G98-1L1FF 3.3 8.35 16 0.8 1.40 0 to +55 250 10 32 x 34 x 19 80 H70-1FFF H70-1L1FF 3.7 8.2 16 0.7 1.40-30 to +70 250 10 25 x 29 x 18 50 H80-1FFF H80-1L1FF 3.0 9.0 13 1.2 1.60 0 to +50 250 10 32 x 34 x 19 80 K70-1FFF K70-1L1FF 8.0 18.0 16 0.8 1.45-30 to +70 250 25 16 x 21 x 17 26 10

Coaxial Standard High Frequency 17 to 40 GHz Finished nickel-plated Standard termination for an isolator is 1 Watt Standard connector is stainless steel K2,9 mm Customized specification is available upon request Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (w x l x t) (grams) max (db) (watts) (mm) Circulator Isolator Peak CW L02-1FFF L02-1L1FF 17.0 20.0 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 L08-1FFF L08-1L1FF 18.0 22.0 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 L12-1FFF L12-1L1FF 19.0 23.5 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 L19-1FFF L19-1L1FF 21.0 25.5 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 L23-1FFF L23-1L1FF 22.0 26.5 20 0.5 1.25-54 to +85 250 25 13 x 16 x 13 20 L29-5FFF L29-5L1FF 25.0 27.0 20 1.0 1.35-10 to +60 250 25 13 x 16 x 13 20 M06-5FFF M06-5L1FF 27.0 31.0 20 1.1 1.35-10 to +60 100 20 13 x 16 x 13 20 M14-5FFF M14-5L1FF 30.0 35.0 18 1.1 1.35-10 to +60 100 20 13 x 16 x 13 20 M25-5FFF M25-5L1FF 35.0 40.0 16 1.3 1.40-10 to +60 100 20 13 x 16 x 13 20 * Finished nickel plated * Standard termination for an isolator is 1 Watt * Standard connector is stainless steel SMA / 2.9 mm K * Average Power 25 Watts for circulator 11

Drop-In Drop-In Model Number Description, Flange Mount Drop-In Number Description F Add F for flange mount 65 for 65W Configuration 12

Drop-In Drop-In Frequency from 300 MHz to 26,5 GHz No NdFeB magnets Small and miniature size or surface mounted tab is available High power up to 500 Watts or low loss < 0.15 db is available Standard package is nickel-plated finished with gold-plated tab Customized design is available with specific frequency electrical specification or termination load up to 100 Watts Standard Narrow Band Drop-Ins Model No. Frequency Isolation Insertion VSWR Operating Circulator Outline Fig. Weight (GHz) min (db) Loss (max) Temp. (ºC) Power rating (grams) max (db) (watts) Circulator Isolator Peak CW Cir. Iso. D01-S-S D01-S-S1 1.2 1.4 20 0.5 1.25-40 to +85 500 50 1A 1C 30 D02-S-S D02-S-S1 1.43 1.53 18 0.5 1.3-30 to +70 500 50 4A 4C 15 D03-S-S D03-S-S1 1.4 1.6 20 0.5 1.25-54 to +95 500 50 1A 1C 30 E01-S-S E01-S-S1 2.0 2.3 20 0.4 1.25-54 to +95 500 50 1A 1C 30 F01-S-S F01-S-S1 3.7 4.2 20 0.5 1.25-54 to +95 200 25 4A 4C 15 G01-S-S G01-S-S1 4.2 4.4 20 0.5 1.25-54 to +95 200 25 6A 6C 8 G02-S-S G02-S-S1 4.4 5.0 20 0.5 1.25-54 to +95 200 25 6A 6C 8 G03-S-S G03-S-S1 5.0 6.0 20 0.5 1.25-54 to +95 200 25 6A 6C 8 H01-S-S H01-S-S1 5.5 6.0 20 0.5 1.25-54 to +95 200 25 6A 6C 8 H02-S-S H02-S-S1 6.4 7.8 20 0.5 1.25-54 to +95 200 25 6A 6C 8 H03-S-S H03-S-S1 7.0 8.5 20 0.4 1.25-54 to +95 200 25 6A 6C 8 I06-S-S I06-S-S1 9.0 10.0 20 0.5 1.25-54 to +95 200 25 6A 6C 8 J01-S-S J01-S-S1 10.7 11.7 20 0.6 1.25-54 to +95 200 25 6A 6C 8 * Power rating listed on this table is for circulators only. * Rugged steel housing provides excellent magnetic shielding. * Standard terminations for isolator are rated at 1 watt cw. * Test fixtures for verifying preformances are available upon request. Outline Fig. 1A Outline Fig. 4A Outline Fig. 6A Outline Fig. 1C Outline Fig. 4C Outline Fig. 6C 13

Flange Mount Drop-In Flange Mount Drop-In Frequency from 800 to 26,5 GHz No NdFeB magnets Small package size and light weight with high performance Customized design is available for specific frequency, electrical specification, or termination load up to 100 Watts Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Outline (GHz) min (db) Loss (max) Temp. (ºC) Power Rating (w x l x t) Fig. (see max (db) (watts) (mm) Pg. 16/17) Circulator Isolator FWD REV Cir. Iso. FC20-S-S FC20-S-S65 0.824 0.849 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B A FC23-S-S FC23-S-S65 0.860 0.900 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B A FC25-S-S FC25-S-S65 0.860 0.960 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B A FC27-S-S FC27-S-S65 0.925 0.960 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B A FD02-S-S FD02-S-S5 1.0 1.1 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B C FD09-S-S FD09-S-S5 1.2 1.4 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B C FD15-S-S FD15-S-S5 1.4 1.6 20 0.5 1.25-54 to +85 65 65 25.4 x 25.4 x 5.84 B C FD15A-S-S FD15A-S-S5 1.435 1.540 20 0.5 1.25-54 to +85 65 65 19.05 x 19.05 x 4.7 D E FD23-S-S FD23-S-S5 1.7 1.8 20 0.5 1.25-54 to +85 65 65 19.05 x 19.05 x 4.7 D E FD25-S-S FD25-S-S5 1.8 1.9 20 0.5 1.25-54 to +85 65 65 19.05 x 19.05 x 4.7 D E FE05-S-S FE05-S-S5 2.0 2.3 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FE07-S-S FE07-S-S5 2.2 2.4 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FE14-S-S FE14-S-S5 2.4 2.5 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FE23C-S-S FE23C-S-S5 2.6 2.9 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FF01B-S-S FF01B-S-S5 2.9 3.1 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FF09B-S-S FF09B-S-S5 3.1 3.5 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FF01-S-S FF01-S-S5 3.7 4.2 20 0.5 1.25-54 to +85 30 30 19.05 x 19.05 x 4.7 D E FG01-S-S FG01-S-S1 4.2 4.4 20 0.5 1.25-20 to +85 30 30 12.7 x 14.6 x 3.3 F G FG02-S-S FG02-S-S1 4.4 5.0 20 0.5 1.25-20 to +85 30 30 12.7 x 14.6 x 3.3 F G FG14A-S-S FG14A-S-S1 4.5 5.3 20 0.5 1.25-20 to +85 30 30 12.7 x 14.6 x 3.3 F G FG24B-S-S FG24B-S-S1 5.2 5.9 20 0.5 1.25-20 to +85 30 30 12.7 x 14.6 x 3.3 F G FG27-S-S FG27-S-S1 5.0 6.5 17 0.6 1.3-20 to +85 30 30 12.7 x 14.6 x 3.3 F G FH04-S-S FH04-S-S1 5.8 6.5 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FH03B-S-S FH03B-S-S1 5.9 6.4 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FH05A-S-S FH05A-S-S1 6.4 7.2 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FH23C-S-S FH23C-S-S1 7.1 7.9 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FH07-S-S FH07-S-S1 7.2 8.4 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FI03A-S-S FI03A-S-S1 7.8 8.5 20 0.5 1.25-20 to +85 10 10 12.7 x 14.6 x 3.3 F G FI19-S-S FI19-S-S1 8.5 9.6 20 0.5 1.25-20 to +85 10 10 8.9 x 12.07 x 3.3 H I FJ01C-S-S FJ01C-S-S1 9.5 10.5 20 0.5 1.25-20 to +85 10 10 8.9 x 12.07 x 3.3 H I FJ26-S-S FJ26-S-S1 11.5 13.5 20 0.5 1.25-20 to +85 10 10 8.9 x 12.07 x 3.3 H I FK02-S-S FK02-S-S1 14.0 14.5 20 0.5 1.25-20 to +85 10 10 8.9 x 12.07 x 3.3 H I Model number see page 12 14

Flange Mount Drop-In Miniature Drop-In Flange Model No. Frequency Isolation Insertion VSWR Operating Circulator Dimension Outline (GHz) min (db) Loss (max) Temp. (ºC) Power Rating (w x l x t) Fig. max (db) (watts) (mm) (see Page 17) Circulator Isolator FWD REV Cir. Iso. FF02-2-S FF02-2-S1 3.6 4.2 18 0.5 1.3-20 to +85 30 30 9.53 x 15.75 x 5.33 MC1 MI1 FG01-2-S FG01-2-S1 4.2 4.4 20 0.5 1.25-20 to +85 30 30 9.53 x 15.75 x 5.33 MC1 MI1 FG02-2-S FG02-2-S1 4.4 5.0 20 0.5 1.25-20 to +85 30 30 9.53 x 15.75 x 5.33 MC1 MI1 FG03-2-S FG03-2-S1 5.0 6.0 20 0.5 1.25-20 to +85 30 30 9.53 x 15.75 x 5.33 MC1 MI1 FH04-2-S FH04-2-S1 5.8 6.5 20 0.5 1.25-20 to +85 10 10 9.53 x 15.75 x 5.33 MC1 MI1 FH05A-2-S FH05A-2-S1 6.4 7.2 20 0.5 1.25-20 to +85 10 10 9.53 x 15.75 x 5.33 MC1 MI1 FH23C-2-S FH23C-2-S1 7.1 7.9 20 0.5 1.25-20 to +85 10 10 9.53 x 15.75 x 5.33 MC1 MI1 FI03A-2-S FI03A-2-S1 7.8 8.5 20 0.5 1.25-20 to +85 5 5 9.53 x 15.75 x 5.33 MC1 MI1 FI23C-1-S FI23C-1-S1 9.2 9.7 20 0.5 1.25-20 to +85 5 5 6.35 x 12.7 x 4.5 MC2 MI2 FJ20-1-S FJ20-1-S1 11.7 12.2 20 0.5 1.25-20 to +85 5 5 6.35 x 12.7 x 4.5 MC2 MI2 FJ30-1-S FJ30-1-S1 12.7 13.2 20 0.5 1.25-20 to +85 5 5 6.35 x 12.7 x 4.5 MC2 MI2 FK06-1-S FK06-1-S1 13.7 14.55 20 0.5 1.25-20 to +85 5 5 6.35 x 12.7 x 4.5 MC2 MI2 FK21-1-S FK21-1-S1 15.5 17.5 20 0.5 1.25-20 to +85 5 5 6.35 x 12.7 x 4.5 MC2 MI2 Model number see page 12 15

Flange Mount Drop-In Outline Fig. A Outline Fig. D Outline Fig. B Outline Fig. E Outline Fig. C Outline Fig. F 16

Flange Mount Drop-In Outline Fig. G Outline Fig. MC 1 Outline Fig. MI 1 Outline Fig. H Outline Fig. MC 2 Outline Fig. I Outline Fig. MI 2 17

Lumped Coaxial Coaxial Tunable Lumped Element Model Number Description 18

Lumped Coaxial Lumped coaxials Frequency from 88 to 512 MHz No NdFeB magnets Connectors for standard models are N female Termination load for standard models is 10 Watt Standard models are nickel-plated finished Customized design is available for specific frequency configuration, electrical specification, connector type or termination load up to 100 Watts Tuning For standard models, Aerotek tunes the electrical performance at its centre frequency covering 4 % of bandwidth from the centre frequency as spectified below. Anyhow, the customer can adjust the frequency range by himself by tuning the adjusted screws (these scres are covered under by white cap) with a screw driver. So the user needs to remove the white caps to see the adjusted screws responsible for the frequency tuning. In addition the customer can also specify the required centre frequency in the purchasing phase already. Model No. Frequency At center frequency (Fc) At band width 4 % Operating Circulator Size Out- Weight Range Isolation Insertion Isolation Insertion Temp. (ºC) Power rating w x l x t line (g) (MHz) db db VSWR db db VSWR (watts) (mm) No. Circulator Isolator (min) (max) (max) (min) (max) (max) Peak CW LCA01-10FFF LIA01-10L10FF 88 100 25 0.25 1.12 23 0.40 1.16 +25 200 50 70 x 70 x 32 1 600 22 0.35 1.20 20 0.50 1.25 0 to +50 LCA03-10FFF LIA03-10L10FF 100 115 25 0.25 1.12 23 0.40 1.16 +25 200 50 70 x 70 x 32 1 600 22 0.35 1.20 20 0.50 1.25 0 to +50 LCA05-10FFF LIA05-10L10FF 115 130 25 0.25 1.12 23 0.40 1.16 +25 200 50 70 x 70 x 32 1 600 22 0.35 1.20 20 0.50 1.25 0 to +50 LCA08-10FFF LIA08-10L10FF 130 150 25 0.25 1.12 23 0.40 1.16 +25 200 50 70 x 70 x 32 1 600 22 0.35 1.20 20 0.50 1.25 0 to +50 LCA11-10FFF LIA11-10L10FF 150 175 25 0.25 1.12 23 0.40 1.16 +25 200 50 70 x 70 x 32 1 600 22 0.35 1.20 20 0.50 1.25 0 to +50 LCA15-10FFF LIA15-10L10FF 175 205 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 LCA19-10FFF LIA19-10L10FF 205 230 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 LCA23-10FFF LIA23-10L10FF 230 265 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 LCA28-10FFF LIA28-10L10FF 265 300 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 LCB19-10FFF LIB19-10L10FF 400 450 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 LCB28-10FFF LIB28-10L10FF 450 512 25 0.25 1.12 23 0.40 1.16 +25 200 50 50 x 50 x 30 2 300 22 0.35 1.20 20 0.50 1.25-10 to +50 19

Drop-In Lumped Drop-In Lumped Element Model Number Description Model: D L X X XXX - X - X X X Drop-In Lumped Element Power Rating of Load 1 for 1 Watt 5 for 5 Watts I: Isolator C: Circulator Code Band B:.30.50 GHz C:.50 1.0 GHz D: 1.0 2.0 GHz Configurations and Terminal Position see below R: R-Type, Clockwise L: L-Type, Counterclockwise Frequency Range specify Frequency and Bandwidth Option Number S for Standard Insert Number to specify non Standard Configuration and Terminal Position CLOCKWISE (R-TYPE) COUNTERCLOCKWISE (L-TYPE) Circulator Circulator Isolator Isolator 20

Drop-In Lumped Drop-In Lumped Frequency from 800 to 1000 MHz No NdFeB magnets Termination load for standard models is 5 Watt Finish nickel-plated Customized design is available for specific frequency range, specification or direction of circulation Model No. Frequency Band- Isolation Insertion VSWR Circulator Operating Dimension Range width db db (max) Power Rating Temp. (ºC) (w x l x t) (MHz) (%) (min) (max) (watts) (mm) Circulator Isolator Peak CW DLCC19D-S-RS DLIC19D-S-RA5 880 825 3 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC20-S-RS DLIC20-SRA5 824 849 3 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC23-S-RS DLIC23-S-RA5 860 900 4.5 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC25-S-RS DLIC25-S-RA5 869 894 2.8 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC23B-S-RS DLIC23B-S-RA5 874 905 3.5 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC24B-S-RS DLIC24B-S-RA5 880 915 3.9 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 DLCC27A-S-RS DLIC27A-S-RA5 925 960 3.7 23 0.4 1.16 +25 20 x 20 x 10 18 0.6 1.30-35 to +85 21

In addition we offer: Isolator and Circulator Products from ARGUS-ET 2009 Please ask for our new Argus catalogue! 22

WAVEGUIDE DEVICES APPLICATION NOTE FOR THE WAVEGUIDE DEVICES MEDIUM POWER WAVEGUIDE T JUNCTION CIRCULATORS 7.25 26.50 GHZ LOW POWER WAVEGUIDE T-JUNCTION CIRCULATORS _ 24.00 60.50 GHZ BROADBAND WAVEGUIDE T-JUNCTION CIRCULATORS _ 8.20 40.00 GHZ LOW POWER WAVEGUIDE T-JUNCTION ISOLATORS _ 7.25 26.50 GHZ LOW POWER WAVEGUIDE T-JUNCTION ISOLATORS _ 24.00 63.50 GHZ BROADBAND WAVEGUIDE T-JUNCTION ISOLATORS _ 8.20 40.00 GHZ WAVEGUIDE T-JUNCTION ISOLATORS B-SERIES (MIN. DEVICES) 8.50 40.00 GHZ WAVEGUIDE DUAL JUNCTION ISOLATORS D-SERIES 8.20 30.50 GHZ WAVEGUIDE ISOLATORS R-SERIES (RIGHT ANGLE DEVICE) WAVEGUIDE T-JUNCTION ISOLATORS S-SERIES (SLIM DEVICES) 17.70 41.00 GHZ WAVEGUIDE ULTRA SMALL ISOLATORS _ 12.70 26.50 GHZ WAVEGUIDE DUPLEXER 17.7 26.5 GHZ MICROSTRIP DEVICES APPLICATION NOTE FOR THE MICROSTRIP DEVICES FDK COMPATIBLE CARRIER TYPE ISOLATORS 2.10 13.30 GHZ FDK COMPATIBLE CARRIER TYPE ISOLATORS 13.50 40.00 GHZ METAL BACKED TYPE CIRCULATORS _ 6.3 41.5 GHZ CARRIER TYPE CIRCULATORS 2.1 40.0 GHZ CARRIER TYPE ISOLATORS SHAPE-4H 4.20 15.60 GHZ CARRIER TYPE ISOLATORS SHAPE-4H 14.00 32.00 GHZ METAL BACKED TYPE ISOLATORS 3.40 40.00 GHZ CARRIER TYPE ISOLATORS 3.10 10.60 GHZ CARRIER TYPE ISOLATORS 9.50 64.00 GHZ DUAL MICROSTRIP CARRIER TYPE 3.10 39.50 GHZ SUBSTRATE TYPE ISOLATORS _ 2.10 10.50 GHZ SUBSTRATE TYPE ISOLATORS _ 8.00 26.50 GHZ SUBSTRATE TYPE ISOLATORS _ 23.50 64.00 GHZ SUBSTRATE TYPE RIGHT ANGLE ISOLATORS _ 17.00 18.30 GHZ SUBSTRATE TYPE CIRCULATORS _ 2.1 15.7 GHZ SUBSTRATE TYPE CIRCULATORS _ 16.5 43.0 GHZ SMT DEVICES APPLICATION NOTE FOR THE SMT DEVICES SURFACE MOUNT CIRCULATORS _ 2.4 27.0 GHZ COAXIAL DEVICES APPLICATION NOTE FOR THE COAXIAL DEVICES COAXIAL ISOLATORS _ 17.00 50.00 GHZ BROADBAND COAXIAL ISOLATORS WITH K-CONNECTORS 18.00 40.00 GHZ COAXIAL CIRCULATORS _ 25.00 45.00 GHZ DROP-IN DEVICES APPLICATION NOTE FOR THE DROP-IN DEVICES DROP-IN ISOLATORS _ 0.57 9.6 GHZ DROP-IN CIRCULATORS 0.6 2.2 GHZ 23

You may also be interested in: Microwave and Millimeter Wave Components, Subassemblies and Assemblies Temperaturmanagement Thermal Management Industriekomponenten Industrial Components Messtechnik Test & Measurement HF-/Mikrowellentechnik RF & Microwaves Luftfahrtelektronik Aviation Entwicklung Engineering & und Service Microwave Components and Super Components Ferrite Isolators and Circulators Isoadapters Adapters Filters Thermal Management Industrial Components Test & Measurement RF & Microwaves Aviation Engineering & Service we provide solutions! we provide solutions! Microwave and Millimeter Wave Components Microwave Components and Super Components You can request these and other brochures in printed form or download the PDF files: www.telemeter.info Germany Telemeter Electronic GmbH Joseph-Gaensler-Straße 10 86609 Donauwoerth Phone +49 906 70693-0 Fax +49 906 70693-50 info@telemeter.de www.telemeter.info Switzerland Telemeter Electronic GmbH Romanshornerstrasse 117 8280 Kreuzlingen Phone +41 71 6992020 Fax +41 71 6992024 info@telemeter.ch www.telemeter.info Czech Republic Telemeter Electronic s.r.o. České Vrbné 2364 37011 České Budějovice Phone +420 38 5310637 Fax +420 38 5510124 info@telemeter.cz www.telemeter.info Isolators and Circulators_05_2015 Technical changes reserved. Reproduction or duplication of any sort is only permitted with the express written permission of Telemeter Electronic GmbH.