핫런너시스템 (Hot Runner System) HOT RUNNER 시스템의개요 폭넓은적용성 : 범용수지뿐만아니라, 엔지니어링수지에도적용할수있습니다. 소형제품 (1g이하) 에서대형제품에까지응용할수있는다양한크기및형상 안전된열분포 : 노즐몸체에서팁부까지균일한열분포로안정된사

Size: px
Start display at page:

Download "핫런너시스템 (Hot Runner System) HOT RUNNER 시스템의개요 폭넓은적용성 : 범용수지뿐만아니라, 엔지니어링수지에도적용할수있습니다. 소형제품 (1g이하) 에서대형제품에까지응용할수있는다양한크기및형상 안전된열분포 : 노즐몸체에서팁부까지균일한열분포로안정된사"

Transcription

1

2

3

4 핫런너시스템 (Hot Runner System) HOT RUNNER 시스템의개요 폭넓은적용성 : 범용수지뿐만아니라, 엔지니어링수지에도적용할수있습니다. 소형제품 (1g이하) 에서대형제품에까지응용할수있는다양한크기및형상 안전된열분포 : 노즐몸체에서팁부까지균일한열분포로안정된사출조건을유지할수있으므로제품품질향상에기여할수있습니다. 응용의다양성 : 팁부의다양한구조는제품면에직접사출할수있고, 런너나, 제품의깊숙한면에까지도직접사출할수있습니다. 특수처리된팁은높은열전도특성을갖고있으며, 내마모성능을개선하여장수명을보증합니다. 표준품으로제공되므로트러블요소가적고, 단납기대응이가능합니다. Wide Application : Applicable to general plastic well as engineering plastic. Constant Heat balanceh : eat balance from nozzle body to tip area enables stabilized injection and improved part quality. Variety of gate V: arious tip model enables direct on part on runner, or deep part inside. Specially treated tip has high heat conductivity and also increased duration against corrosion enables to quarantee long life. Standardized components reduce trouble elements and enable delivery in short time. 4 핫몰드엔지니어링 ( 주 )

5 노즐 (Nozzle) HOT RUNNER 시스템의개요 사출량 (Injection Volume) 기타노즐의사양 (Nozzle Length) 호칭명 (Size) 게이트 (Gate) 유로경 (Channel ØD) 최대게이트경 (Max Gate) 최대사용량 (grams)/gate Max Injection Volume(grams)/gate High viscosity Medium Viscosity Low Viscosity 고점도수지중점도수지저점도수지 valve Ø6 Ø open Ø6 Ø valve Ø8-Ø3 Ø open Ø8 Ø valve Ø10-Ø4 Ø open Ø10 Ø valve Ø12-Ø6 Ø open Ø12 Ø valve Ø22-Ø10 Ø open Ø22 Ø 호칭명 (Size) 노줄길이 (Nozzle lenght) (min/max) 최소게이트간격 (Min Gate Dietance) Valve Valve 16 40/ / / / / * 노즐의길이는고객의요구에맞추어제작가능합니다. (Nozzle Legth Customizing) NM Series Nozzle Model NM 노즐길이 (Nozzle Length) (L) 게이트형식 (Gate Type) 일반형 (General) - DT, DB, DA, 색상교환형 (Color Change) - CT, CB, CA, CF 노즐호칭경 (Nozzle Size) - 20, 25, 35, 45 NMO : Mani fold용 Open 노즐 (Nozzle with Mani fold for thermal sealing) NMV : Mani fold용 Valve 노즐 (Nozzle with Mani fold for mechanical sealing) NSV : Single용 Valve 노즐 (Nozzle with Single for mechanical sealing) NSO : Single용 Open 노즐 (Nozzle Single for thermal sealing) NSO LONG : Single용 Open Long 노즐 (Long Nozzle Single for thermal sealing) NSO EN : Single용 Open Enpla 노즐 (Enpla Nozzle Single for thermal sealing) NM Series 수지별온도및적용성 (Applicable Plastic & Temperature) 결정성수지 비결정성수지 첨가제 수지명 (Plastic) TEMPERATURE( ) NMV/NSV(Valve Gate) NMO/NSO (Open Gate) 성형온도금형온도 DT DB DA DT DB DA PE 210~270 20~60 PP 240~270 40~60 PA11, ~270 40~80 PA6, ~290 60~100 PET PBT 255~270 60~80 POM 195~215 60~100 PPS 300~360 60~180 LCP 285~ ~150 PEEK 370~ ~170 ABS 210~250 50~80 PS 210~280 20~60 SAN 210~260 50~80 PC 270~380 80~120 PPO 260~300 80~110 PVC 160~210 20~60 PMMA 190~290 40~80 Glass Fiber Filled Stabi lizers Flame Retardants Good Possible Contact Agent Not Recommended 5

6 Mani fold Block HOT RUNNER 시스템의개요 균일한충전 : 각캐비티 ( 게이트 ) 까지의거리를동일하게설계하여성형품질이향상됩니다. 신뢰할수있는열안정성 : 고밀도히터를매니폴드형상에맞추어가공하여사용하므로어떠한사출조건에서도안정된온도유지를유지할수있습니다. 용이한색상교환 : 코너부위, 노즐로의유입부등은색상교환이용이한구조로설계되었습니다. 수지의특성 ( 내부식, 색상교환등 ) 에맞는재질및부품을사용하였습니다. 유지및보수가간편하게설계되었습니다. 다양한적용성 : 다양하고특벼한형상설계및조합으로어떠한성형품에도적용이가능합니다. Flow Balance : Distance to each cavity(gate) designed equallu which enables to improve part quality. Reliable Heat Balance : High-density heater used in compliance with manifold shape, which enables to keep constant temperature at any injection conditions. Easy Color Change : Corners and inlets to nozzle etc. are disigned for easy color change. Materials adaquate for plastic characteristics, are used. Designed for easy maintenace. Application Variety : Various and special manifold design enables to apply to any plastic part. 6 핫몰드엔지니어링 ( 주 )

7 히터 & 센서 (Heater & T/C) HOT RUNNER 시스템의개요 압축공법으로 제작하여높은열량과절연강도유지 고온에서의내산성과내부식성강화 T/C 는비접지방식으로제작 Heater manufactured with compression method, shows high heating capacity and also high insulation resistance. Anti-acid, anti-corrosion improved in high temperature. Isolated thermocouple. 7

8 콘트롤러 (Controller) HOT RUNNER 시스템의개요 미려한색상과디자인, 우수한방열구조 간편한조작으로다기능소화 범용사출 및엔지니어링, 알루미늄합금사출성형실현을위한온도제어가능 (~889 /Max) 제어기능이세계최고수준으로 Soft Start중에서도온도제어속도가빠름 Elegant color & Design. Great Rediation Structure. Easy Operation & Good Efficiency. The perfect Control for normal engineering and alluminum alloy injection(~899 / Max.) The best efficiency & speed of PID Control. 8 핫몰드엔지니어링 ( 주 )

9 핫런너시스템 (Hot Runner System) HOT RUNNER 시스템의개요 Hot Assy는 Hot Runner System과관련된모든부품들이완벽하게조립되어제공된다. Hot Assy는납품되기전에전기적인테스트, 작동테스트를완벽하게실시한다. Hot Assy는납품즉시사출이가능하다. 수지의특성 ( 내부식, 색상교환등 ) 에맞는재질및부품을사용하였습니다. 유지및보수가간편하게설계되었습니다. 다양한적용성 : 다양하고특별한형상설계및조합으로어떠한성형품에도적용이가능합니다. Hot Assy is a pre-assembled Hot Runner System with manifold, noxxie andits Components. Hot Assy is being delivered with pre-electical, operational test. Hot Assy can be used immediately on delivery. Materials and components adequate for plastic characteristics (anti-corrosion, color change, etc.) are used. It is designed for easy maintenance. Diverse Application : Various and special manifold designs and combinations enable application for any plastic part. 9

10 NMO 노즐시스템구성도 (NMO Nozzle System Structure) OPEN GATE SYSTEM 상고정판 Clamping Plate 10 노즐바디 Nozzle Body 2 노즐로케이터 Nozzle Locator 11 노즐히터커버 Nozzle Heater Cover 3 상측단열디스크 Upper Riser Pad 12 노즐센서 Nozzle Thermo Couple 4 씨즈히터 Sheath Heater 13 노즐코일히터 Nozzle Coil Heater 5 리드선출구 Lead Line Hole 14 노즐팁 Nozzle Tip 6 매니폴드블록 Manifold Block 15 게이트부시 Gate Bush 7 위치고정핀 Dowel Pin & Disk 16 냉각수홀 Cooling Hole 8 스페이스블록 Specer Block 17 보강판 Back Plate 9 노즐리드선출구 Nozzle Lead Line Hold 18 상원판 Covite Plate 10 핫몰드엔지니어링 ( 주 )

11 NMO 노즐시스템가공예 (NMO Nozzle System Struture) OPEN GATE SYSTEM NMO 노즐시스템가공예 11

12 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM NMO System 표준규격 NM Series Nozzle Model NM 노즐길이 (Nozzle Length) (L) 게이트형식 (Gate Type) 노즐호칭경 (Nozzle Size) - 16, 20, 25, 35, 45 일반형 (General)-DT, DB, 색상교환형 (Color Change)-CT, CB, CF NMO : Manifold 용 Open 노즐 (Nozzle with Manifold for thermal sealing) NMV : Manifold 용 Valve 노즐 (Nozzle with Manifold for mechanical sealing) NSV : Single 용 Valve 노즐 (Nozzle with Single for mechanical sealing) NSO : Single 용 Open 노즐 (Nozzle Single for thermal Sealing) NSO LONG : Single 용 Open Long 노즐 (Long Nozzle Single for thermal sealing) NSO EN : Single 용 Open Enpla 노즐 (Enpla Nazzle Single for thermal sealing) Nozzle Model 표준치수 Nozzle Model Top Spacer Back M/B Runer Channel Nozzle Length Nozzle 가공 Length Mainfold Nozzle Channel Flange 최대 Gate T S B ØMH L L1 M ØNH F ØG(MAX) ØD NM Ø Ø Ø2 16 NM Ø Ø Ø2 20 NM Ø Ø Ø NM Ø Ø Ø NM Ø Ø Ø 핫몰드엔지니어링 ( 주 )

13 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 DT Nozzle 제품의표면에작은게이트흔적이생긴다.(Pin Point 게이트 ) 게이트크기는직접적으로게이트의흔적에영향을미친다. 작은게이트흔적이허용되는성형품에적용된다. Small vesting on the surface of Gate diameter infuences directly gate Applicable to the part which small vestige is acceptable. DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 DT 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 13

14 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 DB Nozzle 게이트흔적이거의없으나링형상의자국이생긴다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시 킬수있다. Almost no gate vestige but round shaped vestige.(pin Point gate with bush) Enabies to improve injection quality in case of engineering piactic or heat-sensitive plastic DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 DB 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 14 핫몰드엔지니어링 ( 주 )

15 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 Nozzle 스푸루절단작업이필요하며링형상의자국이생긴다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시 킬수있다. Round shaped vestige and requires sprue cutting.(sprue gate) Enabies to improve injection quality in case of engineering piactic or heat-sensitive plastic DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 15

16 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM NM0 System Machining 핫몰드엔지니어링 ( 주 )

17 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 CT Nozzle 제품의표면에작은게이트흔적이생긴다.(Pin Point 게이트 ) 게이트크기는직접적으로게이트의흔적에영향을미친다. 작은게이트흔적이허용되는성형품에적용된다. Small vesting on the surface of Gate diameter infuences directly gate Applicable to the part which small vestige is acceptable. CT/CB/CF Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 CT 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 17

18 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 CB Nozzle 게이트흔적이거의없으나링형상의자국이생긴다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시 킬수있다. Almost no gate vestige but round shaped vestige.(pin Point gate with bush) Enabies to improve injection quality in case of engineering piactic or heat-sensitive plastic CT/CB/CF Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 CB 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 18 핫몰드엔지니어링 ( 주 )

19 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM Open NM0 CF Nozzle 스푸루절단작업이필요하며링형상의자국이생긴다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시 킬수있다. Round shaped vestige and requires sprue cutting.(sprue gate) Enabies to improve injection quality in case of engineering piactic or heat-sensitive plastic CT/CB/CF Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 CF 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 ) X1.2/ 표기된공차는금형가공공차입니다. 19

20 NMO 노즐시스템규격 (NMO Nozzle System Specification & Manufacturing) OPEN GATE SYSTEM NM0 System Machining CT Type CB Type CF Type 20 핫몰드엔지니어링 ( 주 )

21 NMMO 노즐시스템구성도 (NMMO Nozzle System Structure) OPEN GATE SYSTEM GATE 수량은 2~4 개까지가능합니다. GATE P.C.D 간격은 Ø20 ~ Ø25 까지적용할수있습니다. GATE quantity can be provided up to 2~4. GATE P.C.D interval can be applied up to Ø 20~Ø

22 NMV 노즐시스템구성도 (NMV Nozzle System Structure) VALVE GATE SYSTEM 상고정판 Clamping Plate 13 노즐코일히터 Nozzle Coil Heater 2 노즐로케이터 Nozzle Locator 14 노즐팁 Nozzle Tip 3 상측단열디스크 Upper Riser Pad 15 게이트부시 Gate Bush 4 씨즈히터 Sheath Heater 16 냉각수홀 Cooling Hole 5 리드선출구 Lead Line Hole 17 보강판 Back Plate 6 매니폴드블록 Manifold Block 18 상원판 Covite Plate 7 위치고정핀 Dowel Pin & Disk 19 실린더덮게판 Cylinder Cover 8 스페이스블록 Specer Block 20 피스톤오링 Piston O Ring 9 노즐리드선출구 Nozzle Lead Line Hold 21 피스톤그라이더링 Piston Glyd Ring 10 노즐 Nozzle Body 22 실린더피스톤 Cylinder Piston 11 노즐히터커버 Nozzle Heater Cover 23 핀가이드부시 Pin Guide Bush 12 노즐센서 Nozzle Thermo Couple 24 벨브핀 Valve Pin 22 핫몰드엔지니어링 ( 주 )

23 NMV 노즐시스템가공도 (Example of NMV Nozzle System Manufacturing) VALVE GATE SYSTEM NMV 노즐시스템가공도 23

24 NMV 노즐시스템규격 (NMV Nozzle System Specification & Manufacturing) VALVE GATE SYSTEM NMV System 표준규격 NM Series Nozzle Model NM 노즐길이 (Nozzle Length) (L) 게이트형식 (Gate Type) 노즐호칭경 (Nozzle Size) - 16, 20, 25, 35, 45 일반형 (General)-DT, DB, 색상교환형 (Color Change)-CT, CB, CF NMO : Manifold 용 Open 노즐 (Nozzle with Manifold for thermal sealing) NMV : Manifold 용 Valve 노즐 (Nozzle with Manifold for mechanical sealing) NSV : Single 용 Valve 노즐 (Nozzle with Single for mechanical sealing) NSO : Single 용 Open 노즐 (Nozzle Single for thermal Sealing) NSO LONG : Single 용 Open Long 노즐 (Long Nozzle Single for thermal sealing) NSO EN : Single 용 Open Enpla 노즐 (Enpla Nazzle Single for thermal sealing) Nozzle Model 표준치수 Nozzle Model Top Spacer Back M/B Runer Channel Nozzle Length Nozzle 가공 Length Mainfold Nozzle Channel Flange 최대 Gate T S B ØMH L L1 M ØNH F ØG(MAX) ØD NMV Ø Ø Ø2 16 NMV Ø Ø Ø2 20 NMV Ø Ø Ø NMV Ø Ø Ø4 35 NMV Ø Ø Ø 핫몰드엔지니어링 ( 주 )

25 NMV 노즐시스템규격 (NMV Nozzle System Specification & Manufacturing) VALVE GATE SYSTEM Valve NMV DT Nozzle 게이트흔적이거의없다 게이트를상대적으로크게할수있으므로사출압력을감소시킬수 있고, 케비티의내압도감소되므로금형의수명이연장된다. 화장품용기나, 의료용부품의성형에특히권장된다. Almost no gate vestige. Able to make blgger gate relatlvely which enables to reduce Injection pressure and pressure in cavity, makes longer lifetime of mold. Recommended for cosmetic container, medical part. DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 DT 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 )X1.2/ 표기된공차는금형가공공차입니다. 25

26 NMV 노즐시스템규격 (NMV Nozzle System Specification & Manufacturing) VALVE GATE SYSTEM Valve NMV DB Nozzle 게이트흔적은거의없으나링형상의자국이생긴다. 게이트를상대적으로크게할수있으므로사출입력을감소시킬수있 고, 캐비티의내압도감소되므로금형의수명이연장된다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시킬수있다. Almost no gate vestige but round shaped vestige. Able to make blgger gate relatlvely which enables to reduce Injection pressure and pressure in cavity, makes longer lifetime of mold. Enables to improve injection quality in case of engineering plactic or heatsensitive plastic. DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 DT 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 )X1.2/ 표기된공차는금형가공공차입니다. 26 핫몰드엔지니어링 ( 주 )

27 NMV 노즐시스템규격 (NMV Nozzle System Specification & Manufacturing) VALVE GATE SYSTEM Valve NMV Nozzle 게금형구조상냉각을설치하기어려운구조에적합하다. 게이트흔적은거의없으나링형상의자극이생긴다. 게이트를상대적으로크게할수있으므로사출입력을감소시킬수있 고, 캐비티의내압도감소되므로금형의수명이연장된다. 엔지니어링플라스틱이나열에민감한수지의성형성을개선시킬수있다. Mold structure is adequate for structure difficult to install cooling. Almost no gate vestige but round shaped vestige. Able to make blgger gate relatlvely which enables to reduce Injection pressure and pressure in cavity, makes longer lifetime of mold. Enables to improve injection quality in case of engineering plactic or heatsensitive plastic. DT/DB/ Type의노즐규격이외 (L 또는기타 ) 의제품에대하여는당사영업, 기술부와협의하십시오. T/C Type이 IC일겨우에는 MODEL명뒤에 IC를표기합니다. 예 ) NMV 20 DT 080 IC L 은고객의요구에맞추어제작가능합니다. L 은노즐기준칫수이며, 금형에는노즐의열팽창량 { (L-20)} 을더한칫수가적용되어야합니다. (L-20)+{ (L-20)}=(L-20)+(L-20)X( 노즐온도-금형온도 )X1.2/ 표기된공차는금형가공공차입니다. 27

28 NMV 노즐시스템규격 (NMV Nozzle System Specification & Manufacturing) VALVE GATE SYSTEM NMV System Machining DT Type DB Type Type 28 핫몰드엔지니어링 ( 주 )

29 NMMV 노즐시스템구성도 (NMV Nozzle System ) VALVE GATE SYSTEM GATE 수량은 2~4 개까지가능합니다. GATE P.C.D 간격은 Ø20 ~ Ø25 까지적용할수있습니다. GATE quantity can be provided up to 2~4. GATE P.C.D interval can be applied up to Ø 20~Ø

30 NSV 노즐시스템구성도 (NSV Nozzle System Structure) SINGLE VALVE GATE SYSTEM 로케이터링 Locating Ring 10 노즐코일히터 Nozzle Coil Heater 2 노즐로케이터 Nozzle Locator 11 노즐써모커플 Nozzle Thermo Couple 3 싱글용튜브히터 Single Tube Heater 12 노즐 Nozzle 4 싱글용써모커플 Single Thermo Couple 13 회전방지핀 Lock Pin 5 하우징고정용볼트 Housing Fixing Bolt 14 노즐히타커버 Nozzle Heater Cover 6 로케이터링고정용볼트 Locating Ring Fixing Bolt 15 스냅링 Snap Ring 7 피스톤캡 Piston Cap 16 게이트부시 Gate Bush 8 하우징 Housing 17 벨브팁 Vale 9 밸브핀 Valve Pin 30 핫몰드엔지니어링 ( 주 )

31 NSV 노즐시스템설계예 (Illustrated NMV Nozzle System Structure) SINGLE VALVE GATE SYSTEM NSV 노즐시스템설계예 31

32 LNSV 노즐시스템구성도 (LNSV Nozzle System Structure) LEVER SINGLE VALVE GATE SYSTEM 로케이터링 Locating Ring 12 노즐고정용볼트 Nozzle Flxing Bolt 2 노즐로케이터 Nozzle Locator 13 노즐써모커플 Nozzle Thermo Couple 3 싱글용튜브히터 Single Tube Heater 14 레버 Lever 4 싱글용써모커플 Single Thermo Couple 15 레버고정용볼트 Lever Flxing Bolt 5 하우징고정용볼트 Housing Fixing Bolt 16 벨브핀 Valve Pin 6 로케이터링고정용볼트 Locating Ring Fixing Bolt 17 노즐 Nozzle 7 피스톤캡 Piston Cap 18 노즐히타커버 Nozzle Heater Cover 8 하우징 Housing 19 스냅링 Snap Ring 9 피스톤 Piston 20 게이트부시 Gate Bush 10 노즐코일히터 Valve Pin 21 벨브팁 Valve Tip 11 맞춤핀 Pin 32 핫몰드엔지니어링 ( 주 )

33 LNSV 노즐시스템설계예 (Illustrated LNMV Nozzle System Structure) LEVER SINGLE VALVE GATE SYSTEM LNSV 노즐시스템설계예 33

34 공압회로도 (Circuit) 솔레노이드솔레노이브밸브밸브 & 콘넥터 & 콘넥터 (Solenoid (Solenoid & Connector) & Circuit & Cyliner 회로도 (Circuit) CYLINDER Type 표준실린더는공기압을작동매체로사용합니다. 공기압용솔레노이드밸브의정격전압은 AC240Volt 입니다. 작동매체로유압을사용하거나 AC240Volt 이외의솔레노이드밸브를사용하는겨우에는당사영업부또는기술부와상의하십시오. Standard Cylinder uses pneumatic pressure. Standard Voltage for solenoid valve for pneumatic pressure is AC240volt. Please contact us in case you want to use hydraulic pressureor to use solenoid valve with different voltage 솔레노이드밸브 & 콘넥터 (Solenoid Valve & Connector) 34 핫몰드엔지니어링 ( 주 )

35 NSV 공압실린더노즐시스템구성도 (Air 설계예 Pressure (NSV Nozzle CYLINDER System) Structure) Circuit & Cyliner Cylinder Piston Machining 40 Air Pressure Cylinder Type 50 Air Pressure Cylinder Type 60 Air Pressure Cylinder Type 35

36 공압회로도실린더 (Circuit) 구성도 (Air 솔레노이브 Pressure 밸브 CYLINDER & 콘넥터 (Solenoid Structure) & Connector) Circuit & Cyliner Cylinder Piston Machining 70 Air Pressure Cylinder Type 80 Air Pressure Cylinder Type 36 핫몰드엔지니어링 ( 주 )

37 NSV 유압실린더노즐시스템구성도 (OIL 설계예 Pressure (NSV Nozzle CYLINDER System) Structure) Circuit & Cyliner 유압실린더구성도 50 OIL Pressure Cylinder Type 실린더커버고정용볼트 (Cylinder Cover Fixing Bolt) 실린더커버 (Cylinder Cover) 하우징고정용볼트 (Housing Fixing Bolt) 피스톤커버 (Piston Cover) 실린더하우징 (Cylinder Housing) 피스톤 (Piston) 오링 ("O" Ring) 그라이더링 (Glyd Ring) ["O" Ring 규격참고도 ] ["O" Ring 규격 ] ARP ARP ARP ARP ARP ARP ARP ARP 215 NO 50 CYLINDER 1 ARP ARP ARP ARP ARP ARP ARP ARP

38 유압공압회로도실린더 (Circuit) 구성도 (OIL 솔레노이브 Pressure 밸브 CYLINDER & 콘넥터 (Solenoid Structure) & Connector) Circuit & Cyliner 유압실린더구성도 70 OIL Pressure Cylinder Type 실린더커버고정용볼트 (Cylinder Cover Fixing Bolt) 실린더커버 (Cylinder Cover) 하우징고정용볼트 (Housing Fixing Bolt) 피스톤커버 (Piston Cover) 실린더하우징 (Cylinder Housing) 오링 ("O" Ring) 피스톤 (Piston) 그라이더링 (Glyd Ring) ["O" Ring 규격참고도 ] ["O" Ring 규격 ] ARP ARP ARP ARP ARP ARP ARP ARP 222 NO 70 CYLINDER 1 ARP ARP ARP ARP ARP ARP ARP ARP 핫몰드엔지니어링 ( 주 )

39 NSV NSO 노즐리드선시스템가공도설계예 (NSO (NSV Nozzle Lead System) Line Machining) OPEN GATE NOZZLE 39

40 NSO 노즐리드선시스템가공도구성도 (NSO Nozzle Lead System Line Structure) Machining) OPEN GATE NOZZLE NSO20 Nozzle Machining 40 핫몰드엔지니어링 ( 주 )

41 NSV NSO 노즐시스템설계예구성도 (NSV (NSO Nozzle System) Structure) OPEN GATE NOZZLE NSO25 Nozzle Machining 41

42 NSO 노즐리드선시스템가공도구성도 (NSO Nozzle Lead System Line Structure) Machining) OPEN GATE NOZZLE NSO35 Nozzle Machining 42 핫몰드엔지니어링 ( 주 )

43 NSV NSO 노즐시스템설계예구성도 (NSV (NSO Nozzle System) Structure) OPEN GATE NOZZLE NSO45 Nozzle Machining 43

44 NSO 노즐리드선시스템가공도구성도 (NSO Nozzle Lead System Line Structure) Machining) OPEN GATE NOZZLE NSO Long Nozzle Machining 44 핫몰드엔지니어링 ( 주 )

45 NSV NSO 노즐시스템설계예구성도 (NSV (NSO Nozzle System) Structure) OPEN GATE NOZZLE NSO En Nozzle Machining 45

46 콘트롤러특징및사양 (Controller Structure) Controller 46 핫몰드엔지니어링 ( 주 )

47 콘트롤러특징및사양 (Controller Structure) Controller 47

48 노즐히터의규격 (Nozzle Heater Spec) Heater & Thermo Couple Heater & Thermo Couple HTN20/HTN25/HTN35/HTN45 48 핫몰드엔지니어링 ( 주 )

49 노즐히터의규격 (Nozzle Heater Spec) Heater & Thermo Couple HTN20/HTN25/HTN35/HTN45 49

50 써모커플의규격 (Thermo Couple Spec) Heater & Thermo Couple 메니폴드용써모커플 (Manifold Block Thermo Couple) T/C(THERMOCOUPLE) 는 CA(K) 과 Type IC(J) Type 이주로사용됩니다. T/C Type 및길이는사용하는콘트롤러나노즐의규격에맞추어선정하십시오. Thermocouple CA(K) type or IC(J) type is usually used. Thermocouple type and length shall be selected according to hot runer controller and hot nozzle specification. 메니폴드용써모커플 (Manifold Block Thermo Couple) T/C(THERMOCOUPLE) 는 CA(K) 과 Type IC(J) Type이주로사용됩니다. T/C Type 및길이는사용하는콘트롤러나노즐의규격에맞추어선정하십시오. Thermocouple CA(K) type or IC(J) type is usually used. Thermocouple type and length shall be selected according to hot runer controller and hot nozzle specification. 50 핫몰드엔지니어링 ( 주 )

We at Hot Mold Engineering Co. are pleased to meet you. Hot Mold Engineering Co. has been established in 1999 as a professional hot runner design manu

We at Hot Mold Engineering Co. are pleased to meet you. Hot Mold Engineering Co. has been established in 1999 as a professional hot runner design manu Hot Mold ENG.Co.,Ltd. I will try to supply a technology and quality meeting on customer need through several colors shooting out hot runner system. We at Hot Mold Engineering Co. are pleased to meet you.

More information

나사식볼밸브.indd

나사식볼밸브.indd HWASUNG VALVES 19~1990 001~010 19. 03 19. 0 1991~000 199. 1 199. 1 199. 11 199. 09 1999. 03 1999. 09 1999. 09 1999. 10 1999. 11 000. 0 000. 03 001~010 001. 03 001. 10 001. 11 00. 0 003. 03 003. 0 00. 01

More information

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series High Class 공압식엑츄에이터 PNEUMATIC ACTUATORS Rack & Pinion Designed GD-SERISE Double Acting GD-SERISE Single Acting (Spring Return) GINICE Co., Ltd www.ginice.co.kr / www.ginice.com GD-SERISE / GS-SERISE DESCRIPTION

More information

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78 - - HDV -8-7 -9 S1-0 S - S - S - -11 - S1-16 K -0 K - S -7 S -0 S - HV-6, HV-8-78 -7-9 S11, S1-60 S1, S1-61 -7-9 S11-0 K1-1 K1 - S1 - S1 - S1 - HNV000-6 -6 HMV -66 HMV -69 HLV -7 HLV -7 HFV -76 HVC -81

More information

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Vertical Probe Card for Wafer Test Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Life Time: 500000

More information

The Top Ten Moulding Problems

The Top Ten Moulding Problems 900 1700 1960,,,,,,,,, FDA 1, II 500 100 (toughness) 1, 2 (screw) 25mm(01 ) (pellet) 3mm(0125 ), 23mm(009 ) 1,000kg(2,200lb) 25kg(551lb) 08g/cm 3 (50lb/ft 3 ) 1 2 3 4 (thermal shutoff), (heater band),

More information

02 Reihe bis 750 bar GB-9.03

02 Reihe bis 750 bar GB-9.03 Water as a tool High-Pressure Plunger Pumps 02-Line (up to 750 bar) 252 702 1002 1502 1852 2502 Technical Data High-Pressure Plunger Pump Type 252 / 702 approx. 1.8 l approx. 50 kg net 45 mm/1.77 inch

More information

기능.PDF

기능.PDF 1 1) 1 2) SK COMPLEX 1 Heating Cooling 3) 1 2 2 3 1) 2 2) 3 4 1) Floating Type Heat Exchanger 8 2) Fixed Type Heat Exchanger 11 3) U-Type Heat Exchanger 13 4) Air Fan Cooler 15 5) Double Pipe Heat Exchanger

More information

E010 CYLINDER BLOCK GROUP (0 01) 76

E010 CYLINDER BLOCK GROUP (0 01) 76 E010 CYLINDER BLOCK GROUP (0 01) 75 E010 CYLINDER BLOCK GROUP (0 01) 76 E020 PISTON, CRANKSHAFT GROUP (0 02) 77 E030 CYLINDER HEAD GROUP (0 03) 78 E040 ROCKER ARM GROUP (0 04) 79 E050 TIMING CASE GROUP

More information

D40-T00A CLUTCH GROUP D40-T0A CLUTCH LEVER GROUP DK45-T0A CLUTCH HOUSING GROUP.....

D40-T00A CLUTCH GROUP D40-T0A CLUTCH LEVER GROUP DK45-T0A CLUTCH HOUSING GROUP..... TABLE OF CONTENTS [ENGINE] 4A0A-E00 CYLINDER BLOCK GROUP........................... 4A0LX-E00 CYLINDER BLOCK GROUP...........................3 4A0-E00 OIL PAN GROUP................................... 5

More information

Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controll

Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controll Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controller의 장착 및 사용이 편리 Specification (사양) 적용유체 : 액체 (D.I or

More information

Parts List

Parts List COP 1440 Drifter Parts for Atlas Copco Atlas Copco No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks 3115 1605 90 set of nipple 1set *} front head 3115 0286 00 dome nut 0.26kg 3115

More information

Product A4

Product A4 2 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 3 4 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 5 PI Increasing Performance PES PPSU PSU

More information

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection)

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) SERVICE MANUAL (Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) 12 (Storage Bins) 12 (Ice Machine)

More information

MAX DRILL Construction system of MAX Drill's Code no. DRILL VMD KOREA TECHNICS is The TOP of the world technics 49

MAX DRILL Construction system of MAX Drill's Code no. DRILL VMD KOREA TECHNICS is The TOP of the world technics 49 010~054 본문 2011.04.25 06:13 PM 페이지48 ApogeeX TURBO DRILL HSD 2 D 범용선반 가공시, 가공직경 ø이상은 TSD나, MXD 사용을 권장함. DRILL The drill body treated by forging was much solider and much stronger in impact. The especially

More information

MIL-C-99 Class C, R Style Connector, Receptacle, lectrical, Wall mounting YH7(MS7 Style) PLCS 전기적특성 (lectrical ata) ltitude erating Service Rating Nom

MIL-C-99 Class C, R Style Connector, Receptacle, lectrical, Wall mounting YH7(MS7 Style) PLCS 전기적특성 (lectrical ata) ltitude erating Service Rating Nom MIL-C-99 Class C, R Style MIL-C-99 Class C, R Style 주문정보 및 부품번호 구분 (Ordering Information) MS7 C 0 C 7 P W MS Number Shell Style Class Contact rrangement Contact Style Polarizing Position MS Number Shell

More information

00.1

00.1 HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Partly threaded, galvanized or yellow chromatized dk k L d m Head Ø dk

More information

Microsoft PowerPoint - 060216 STGE Valve_Assy Manual(k).ppt

Microsoft PowerPoint - 060216 STGE Valve_Assy Manual(k).ppt HOTSYS VALVE SYSTEM 조립순서 HOTRUNNER TOTAL SOLUTION 목 차 1. HOTSYS 표준 --------- 3 2. 공구 및 측정장비 소개 --------- 4 3. Back Up Plate 조립 --------- 5 4. Nozzle 조립 --------- 13 5. Manifold 조립 --------- 16 6. Space

More information

소개.PDF

소개.PDF (c) Process Pressure Measurement 1 Process Pressure Measurement Flow, Level, Temperature Flow, Level, Temperature, 2, 1) ( ),, A F F/A 2), 3 (a) (b) (a) (b) (c) 1 (a) (ABSOLUTE PRESSURE), 10 kg/cm 2 abs

More information

DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They

DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They DC Link Capacitor DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They are Metallized polypropylene (SH-type)

More information

7 LAMPS For use on a flat surface of a type 1 enclosure File No. E Pilot Lamp File No. E Type Classification Diagram - BULB Type Part Mate

7 LAMPS For use on a flat surface of a type 1 enclosure File No. E Pilot Lamp File No. E Type Classification Diagram - BULB Type Part Mate 7 LAMPS For use on a flat surface of a type 1 enclosure File No. E242380 Pilot Lamp File No. E242380 Type Classification Diagram - BULB Type Part Materials 226 YongSung Electric Co., Ltd. LAMPS

More information

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i SERVICE MANUAL N200M / N300M / N500M ( : R22) e-mail : jhyun00@koreacom homepage : http://wwwicematiccokr (specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements)

More information

No Slide Title

No Slide Title 저속 고토크 유압 모터 JS,JH, 시리즈 2K / J2K, 6k / J6K 시리즈 2005-1 B137 001-02 June 2000 JH 시리즈 특징 스풀 밸브 및 지로터가 있는 컴팩트한 디자인. 수입 고압 용량 샤프트 씰, 다 양한 범위의 마운팅 플랜지, 샤프트, 포트, 속도가 설계 유연성을 제공합 니다. 샤프트 회전 방향 및 속도는 쉽고 부드럽게 제어할

More information

GLHPS-D

GLHPS-D Digital Hot Plate & Stirrer GLHPS-D 글로벌랩의 제품을 구입하여 주셔서 감사드립니다. 제품을 사용하시기 전에 안전을 위한 준비사항 을 읽고 올바르게 사용해 주십시오. 이 사용설명서는 제품을 직접 사용하시는 분에게 보내어지도록 하여 주십시오. 사용 전 주의 사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 막기 위한 내용으로 반드시

More information

CK2810.pdf

CK2810.pdf TABLE OF CONTENTS [ENGINE] 3A39LW-E00 CYLINDER BLOCK GROUP........................... 3A50E-E00 OIL PAN GROUP................................... 3 3A39LW-E030 CYLINDER HEAD GROUP............................

More information

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770>

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770> 양성자가속기연구센터 양성자가속기 개발 및 운영현황 DOI: 10.3938/PhiT.25.001 권혁중 김한성 Development and Operational Status of the Proton Linear Accelerator at the KOMAC Hyeok-Jung KWON and Han-Sung KIM A 100-MeV proton linear accelerator

More information

한국콘베어-AP8p

한국콘베어-AP8p K O R E A C O N V E Y O R K.C AP APRON CONVEYOR Apron Conveyors are used for conveying various bulk materials. They are particulary suitable for conveying hot materials such as clinker. K.C Apron Conveyors

More information

F&C 표지5차(외면) - 완성본

F&C 표지5차(외면) - 완성본 유리 테이퍼관 부유식 유량계 (Glass Taper Tube Local Flow Meters) FGF Series / FGO FGF Series / FGO 모델선택 (Model Selection Guide) FGF Series / FGO MODEL FGF(N.S) FGM FMO CODE DESCRIPTION GLASS TAPER TUBE LOCAL FLOW

More information

CK35 reservedelskatalog.pdf

CK35 reservedelskatalog.pdf TABLE OF CONTENTS [ENGINE] 3A65LX-E00 CYLINDER BLOCK GROUP........................... 3A50E-E00 OIL PAN GROUP................................... 3 3A65LW-E030 CYLINDER HEAD GROUP............................

More information

WIDIN - Toolholding Catalogue.pdf

WIDIN - Toolholding Catalogue.pdf T CH CHUC UCK K 60 ER Strong Torque Power ER Chuck have strong torque power. Slim designed ER Nut were minimized an interruption to workpiece. If using Carbide Drill and coated drill, it can be improve

More information

Berechenbar mehr Leistung fur thermoplastische Kunststoffverschraubungen

Berechenbar mehr Leistung fur thermoplastische Kunststoffverschraubungen Fastener 독일 EJOT 社에서 만든 최고의 Plastic 전용 Screw 아세아볼트 CO., LTD. 대한민국 정식 라이센스 생산 업체 EJOT GmbH & Co. KG DELTA PT März 2003 Marketing TEL : 032-818-0234 FAX : 032-818-6355 주소 : 인천광역시 남동구 고잔동 645-8 남동공단 76B 9L

More information

목차

목차 KC CODE KCS 57 80 10 국가건설기준표준시방서 Korean Construction Specification KCS 57 80 10 : 2017 상수도공사 펌프설비 2017 년 8 월일제정 http://www.kcsc.re.kr 국가건설기준 목차 KCS 57 80 10 상수도공사펌프설비 1. 일반사항 1.1 적용범위. 1.2 참고기준 KS B 1511

More information

PL E-Euro-V01.pmd

PL E-Euro-V01.pmd Price List valid from 1st of March 2009 English 1/2009 The Profile System Order comments Article-Number - additional specification.60 definines 1 bar of aluminium profile, length 6 m Example: 1.09.016040.14LP.60

More information

13장_

13장_ C H A P T E R 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 13.1 ( ) 12 000 psi [ 13 1] 6in 10 [ 13 2] (stamping) 500 501 (pressure regulator) (oil mist) (lubricator) (air dryer) (muffler) 13.2 21 % 78 % 1 % 4

More information

<32382DC3BBB0A2C0E5BED6C0DA2E687770>

<32382DC3BBB0A2C0E5BED6C0DA2E687770> 논문접수일 : 2014.12.20 심사일 : 2015.01.06 게재확정일 : 2015.01.27 청각 장애자들을 위한 보급형 휴대폰 액세서리 디자인 프로토타입 개발 Development Prototype of Low-end Mobile Phone Accessory Design for Hearing-impaired Person 주저자 : 윤수인 서경대학교 예술대학

More information

동아내지1수(A~E)-수정2

동아내지1수(A~E)-수정2 DFT-10A-10P FILE NO. Body : Polycarbonate Contact : Brass, Nickel Plated Cover : PS resin Current Rating : 10A Voltage Rating With standing Voltage : AC 2500V one minute Insulation Resistance : 100M over

More information

WOMA Pumps - Z Line

WOMA Pumps - Z Line High-Pressure Plunger Pumps Z-Line (up to 1500 bar) 150 Z 250 Z 400 Z 550 Z 700 Z 1000 Z High-Pressure Plunger Pump Type 150 Z 211 133 250 615 100 95 Discharge 60 -Konus 9.5 deep M12x17 deep 322 255 331

More information

PJTROHMPCJPS.hwp

PJTROHMPCJPS.hwp 제 출 문 농림수산식품부장관 귀하 본 보고서를 트위스트 휠 방식 폐비닐 수거기 개발 과제의 최종보고서로 제출 합니다. 2008년 4월 24일 주관연구기관명: 경 북 대 학 교 총괄연구책임자: 김 태 욱 연 구 원: 조 창 래 연 구 원: 배 석 경 연 구 원: 김 승 현 연 구 원: 신 동 호 연 구 원: 유 기 형 위탁연구기관명: 삼 생 공 업 위탁연구책임자:

More information

전용]

전용] A Study of select the apropos processing mechanical method by the presume of transformation of teeth s surface degree ABSTRACT This study has been tried to select the apropos processing method by the

More information

¹Ìµå¹Ì3Â÷Àμâ

¹Ìµå¹Ì3Â÷Àμâ MIDME LOGISTICS Trusted Solutions for 02 CEO MESSAGE MIDME LOGISTICS CO., LTD. 01 Ceo Message We, MIDME LOGISTICS CO., LTD. has established to create aduance logistics service. Try to give confidence to

More information

Basic CMYK

Basic CMYK 02 E & C MERITZ CO., LTD HISTORY of E&C MERITZ 1986.02 Established Korea Filter Corporation 1986.02 Develop and Distribute Bag Filter, Air Filter 1987.10 Contracted Alsop ENGINEERING Co / U.S.A Whole Item

More information

1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard curr

1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard curr Non-Contact Infrared Temperature I R - Compact Sensor / Transmitter GASDNA co.,ltd C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX: +82-32-623-7510

More information

歯coolingtower개요_1_.PDF

歯coolingtower개요_1_.PDF . Cooling Tower Cooling Tower Counter Flow Cross Flow,. 1.Cooling Tower. Air Flow 1) Counter Flow System Fan Air Fan Discharge Distributor Fill Counter Flow ( ) Cold Water Basin. 1 Counter Flow System

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할 저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

04-다시_고속철도61~80p

04-다시_고속철도61~80p Approach for Value Improvement to Increase High-speed Railway Speed An effective way to develop a highly competitive system is to create a new market place that can create new values. Creating tools and

More information

歯Trap관련.PDF

歯Trap관련.PDF Rev 1 Steam Trap Date `000208 Page 1 of 18 1 2 2 Application Definition 2 21 Drip Trap, Tracer Trap, 2 22 Steam Trap 3 3 Steam Trap 7 4 Steam Trap Sizing 8 41 Drip Trap 8 42 Tracer Trap 8 43 Process Trap

More information

슬라이드 1

슬라이드 1 Various Aspects of Engineering 1. Design - Effective Design = Structure + Material 2. Manufacturing - Fabrication(-ing technology) - Performance Test 3. After-Service - Reliability and Maintenance - Failure

More information

# KM

# KM PARTS BOOK 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER 1-NEEDLE, NEEDLE FEED LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER MODEL KM-506 SERIES KM-506-7S 1-NEEDLE, STRAIGHT LOCK-STITCH

More information

Microsoft Word - Shield form gasket.doc

Microsoft Word - Shield form gasket.doc Shield Form Gasket (P/N: UKB10-LS10-190-5, UKB6-LN6-200-5, UKU13-3-150-8, URB10-R5-200-D, URB5-1.5-200-4, URB8-4-180-4, URB9-1-200-D, URU10-3-150-8) 1 Shield form gasket ( 주 ) 뉴티씨 ( NewTC ) 1-1 Description

More information

SEMI U+

SEMI U+ SSENP FLOW METER 에스에스이엔피 경기도화성시새강 1 길 43 TEL : 031)8015-2452 FAX : 031)935-0452 E-mail : kelvin@ssenp.co.kr Turbine Digital Flow meter 특징 SEMI U+ PVC, PTFE, P.P, PVDF 등다양한재질 정밀성, 내화학성우수 4~20 ma, Alarm,

More information

The Top Ten Moulding Problems

The Top Ten Moulding Problems ,,, (spacer) ,,, 4 : 1 :, 2 : 3 : 32mm[0125 ] (pellet),,,, (pallet) 40,, 1000kg,, (block copolymer), ( ) (glycol) ( ), 32mm[0125 ], 25kg(55lb) 500kg(1,103lb) 1 2 2, 1-3 3 4 ,,, 3, ( ), 5 , (degradation)

More information

K o., Ltd. 구조도 8 : DUST VER PA ption E : PLUNGER H : 조절형도그 (P...A) D : JAW A : GRIPPER BDY I : 수동형도그 (P...M) 1G G : PS BRAKET J : 근접센서 1A 4E PB ption

K o., Ltd. 구조도 8 : DUST VER PA ption E : PLUNGER H : 조절형도그 (P...A) D : JAW A : GRIPPER BDY I : 수동형도그 (P...M) 1G G : PS BRAKET J : 근접센서 1A 4E PB ption K o., Ltd. 공압실린더 2GN-6 특징 Wedge 방식의 입니다. Jaw & Plunger 의작용길이를증대시켜동작안정성을증대하였습니다. 다면취부다면포트구성등고객중심의이용성편의성을추구하였습니다. 기능향상에견고하고외관이미려합니다. 부품의표준화공용화로경제성이뛰어납니다. 근접센서사용시 가지감지도그의선택가능합니다. 참고자료 AJP KGUA AP AD AS2 형식기호

More information

2

2 02 1 1 22 36 38 46 5 1 54 61 65 77 81 2 _ 3 4 _ 5 6 _7 8 _ 9 1 0 _ 11 1 2 _ 13 1 4 _ 15 1 6 _ 17 1 8 _ 19 2 0 _ 21 2 2 www.kats.go.kr www.kats.go.kr _ 23 Scope of TC/223 Societal security International

More information

D103198X0KR_Jul18 Korean

D103198X0KR_Jul18 Korean Fisher i2p-100... 1... 1... 2... 2... 2... 5... 7... 7... 8... 9... 10... 10... 11... 12... 12... 12... 12... 14... 14... 16... 16... 17... 18 1. Fisher i2p-100 W8710... 19... 20 Fisher i2p 100,, ( 1 )..,,,,

More information

<BACEBDBAC5CD20BAEAB7CEBCC52D A2DC3D6C1BE2D312D E6169>

<BACEBDBAC5CD20BAEAB7CEBCC52D A2DC3D6C1BE2D312D E6169> DOOCH PUMP Intelligent pressure boosting system 5Hz BOOSTER PUMP SYSTEM Water supply system Pressure boosting system Irrigation system Water treatment system Industrial plants 두크펌프 www.doochpump.com CONTENTS

More information

KM-380BL,BLB(100908)

KM-380BL,BLB(100908) PARTS BOOK KM-380BL KM-380BLB KM-380BL KM-380BLB MODEL FOR HEAVY MATERIAL KM-380BL CYLINDER-BED TYPE, 1-NEEDLE UNISON FEED, VERTICAL LARGE HOOK, LOCK-STITCH MACHINE. KM-380BLB CYLINDER-BED TYPE, 1-NEEDLE

More information

Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드]

Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드] 전자회로 Ch3 iode Models and Circuits 김영석 충북대학교전자정보대학 2012.3.1 Email: kimys@cbu.ac.kr k Ch3-1 Ch3 iode Models and Circuits 3.1 Ideal iode 3.2 PN Junction as a iode 3.4 Large Signal and Small-Signal Operation

More information

IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사 항을고려하여주시면긴수명을보장합니다. 1) 용량선정이적정하게되었는지확인하십시오. 2) 충돌물체와 Shock Absorber 의설치각도가일치한가를확인하십시오. Piston Rod 의중

IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사 항을고려하여주시면긴수명을보장합니다. 1) 용량선정이적정하게되었는지확인하십시오. 2) 충돌물체와 Shock Absorber 의설치각도가일치한가를확인하십시오. Piston Rod 의중 SHOCK ABSORBER 취급설명서 본사 : (153-709) 서울시금천구디지털로9길 32 에이동 704호 ( 갑을그레이트밸리 ) Tel. 02-2106-8585( 대표 ) Fax. 02-2106-8588 http: //www.izmac.co.kr E-mail: richardlee@izmac.co.kr IZMAC 의 Shock Absorber 는수백만번을작동할수있도록설계되어있으며다음과같은사

More information

ePapyrus PDF Document

ePapyrus PDF Document 19 3 (2009 9 ) J Korean Soc Occup Environ Hyg 2009;19(3):240~249 Numerical Study on Ventilation Method for Temperature Control of HRSG Building Chul Hwan Kim Jong Wook Lee Hoon Ki Choi Geun Jong Yoo Dept.

More information

DBPIA-NURIMEDIA

DBPIA-NURIMEDIA 한국소음진동공학회 2015추계학술대회논문집년 Study of Noise Pattern and Psycho-acoustics Characteristic of Household Refrigerator * * ** ** Kyung-Soo Kong, Dae-Sik Shin, Weui-Bong Jeong, Tae-Hoon Kim and Se-Jin Ahn Key Words

More information

T5855-G226A HST PROPER SHAFT GROUP T585-G230A SHAFT GROUP T585-G234A SHAFT 2 GROUP...

T5855-G226A HST PROPER SHAFT GROUP T585-G230A SHAFT GROUP T585-G234A SHAFT 2 GROUP... TABLE OF CONTENTS [ENGINE] 3B83-E00 CYLINDER BLOCK GROUP........................... 3B83-E020 OIL PAN GROUP................................... 3 3B83LW-E030 CYLINDER HEAD GROUP............................

More information

PowerPoint 프레젠테이션

PowerPoint 프레젠테이션 Reasons for Poor Performance Programs 60% Design 20% System 2.5% Database 17.5% Source: ORACLE Performance Tuning 1 SMS TOOL DBA Monitoring TOOL Administration TOOL Performance Insight Backup SQL TUNING

More information

Microsoft PowerPoint - Powertrain_Sensor

Microsoft PowerPoint - Powertrain_Sensor Manifold Absolute Pressure(Temperature) Sensor Manifold Absolute Pressure (Temperature) Sensor measures the pressure (temperature) of intake manifold for calculating indirectly the intake air flow quantity

More information

歯RCM

歯RCM Reliability Centered Maintenance Page 2 1.,,,. Mode Component, Sub-system, System, System. Reliability Centered Maintenance :, program? Mechanism Page 3 Page 4. Mode Mode () () (FMEA) (FTA) (LTA) System

More information

CFP 제작(0113)

CFP 제작(0113) C 1514E C ISO 9001 ISO14001 OHSAS 18001 C-series foot support process pump ISO2858 ISO5199 www.hsgoodsprings.com EASY TO CONTACT TEL : 82-55-268-8976 FAX : 82-55-268-7947 Global Excellence, Hyosung Pump

More information

JSI-EN-04-2E-001=LHDV.hwp

JSI-EN-04-2E-001=LHDV.hwp ` JSI - EN - 05-2E - 002 Date Feb 1st, 2005 Total Pages 6 P re se n t P a g e 1 Boom load holding valve The boom pump sucks hyd. oil from the reservoir and supplies oil to each boom cylinder through the

More information

2.2, Wm -2 K -1 Wm -2 K -2 m 2 () m 2 m 2 ( ) m -1 s, Wm -2 K -1 Wsm -3 K -1, Wm -2 K -1 Wm -2 K -2 Jm -3 K -1 Wm -2 K -1 Jm -2 K -1 sm -1 Jkg -1 K -1

2.2, Wm -2 K -1 Wm -2 K -2 m 2 () m 2 m 2 ( ) m -1 s, Wm -2 K -1 Wsm -3 K -1, Wm -2 K -1 Wm -2 K -2 Jm -3 K -1 Wm -2 K -1 Jm -2 K -1 sm -1 Jkg -1 K -1 KS B ISO 9806-2 - 2 1. ( ) ( ),. 2. 2.1 (1) :, (2) :,. (3) :, CPC(Compound Parabolic Concentrator) (4) : (5). (6) () (7) :. (8) :. (9) () :,., CPC. (10) : 2.2, Wm -2 K -1 Wm -2 K -2 m 2 () m 2 m 2 (

More information

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기구 Governor (Mixer, Boiler, Furnace, Plant Air Service) 특징 고정밀도, 대유량 - Loading Type Pilot

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

Using Material of High Quality! ST 044N LYOUT O TH HIN Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space (Dimensions in mm) ending radius

Using Material of High Quality! ST 044N LYOUT O TH HIN Ls: Stroke Lp: Loop Length Lf: Loop Projection Hs: Safe Space (Dimensions in mm) ending radius Min Max ST 044N MTRIL hain material: PS-polyamide with glass fiber reinforced UL94-H Low Noise Low Mote Speed : 10m / sec Temperature : -30 ~ +130 Other installation Length: Vertical curve above= max 2.0m

More information

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v RK 5 75/0.0 압력 릴리프 밸브 파일럿 작동식 타입 ZDB와 ZDB 공칭 사이즈 6 시리즈 X 최대 작동 압력 5 bar 최대 유량 60 L/min H556 0 타입 Type ZDB 6 VP-X/... 개요 특징 목차 페이지 특징 주문코드 우선 공급 가능 사양 기호 기능, 단면도 기술자료 특성곡선 유니트 치수 샌드위치 플레이트 밸브 DIN 0 형식 A에

More information

DOOSAN HEAVY INDUSTRIES & CONSTRUCTION TOOL STEEL FOR DIE CASTING & HOT STAMPING The ever-faster pace of change necessitates products of ever-higher p

DOOSAN HEAVY INDUSTRIES & CONSTRUCTION TOOL STEEL FOR DIE CASTING & HOT STAMPING The ever-faster pace of change necessitates products of ever-higher p Doosan Heavy Industries & Construction TOOL STEEL FOR DIE CASTING & HOT STAMPING DOOSAN HEAVY INDUSTRIES & CONSTRUCTION TOOL STEEL FOR DIE CASTING & HOT STAMPING The ever-faster pace of change necessitates

More information

歯국문-Heatran소개자료1111.PDF

歯국문-Heatran소개자료1111.PDF Heat Transfer Technology Heat Transfer Technology HEATRAN Heat Transfer Technology 1. 회사개요 Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer

More information

X-VA-MT3809G-MT3810G-kor

X-VA-MT3809G-MT3810G-kor www.brooksinstrument.com 기본적인 설명 진행전 반드시 읽어 주십시오. Brooks 는 많은 국내 및 국제 기준을 충족하기 위해 제품을 설계, 생산 및 테스트를 합니다. 이 제품이 제대로 설치, 운영되고 그 들이 정상 사양 내에서 작동하도록 지속적인 유지보수가 필요합니다. Brooks Instrument 제품을 설치, 사용 및 유지보수 시

More information

고범석.PDF

고범석.PDF Wire to Wire Temperature Rise type and Temperature Rise Prediction of Afterward Combined Environmental Test That of Wire to Wire Connector for Automobile 2002 2 1 Wire to Wire Temperature Rise type and

More information

Microsoft Word - 120326 SK케미칼.doc

Microsoft Word - 120326 SK케미칼.doc SK케미칼 (612) 212. 3. 26 기업분석 Analyst 김나연 2.3772-716 irene.kim@hanwha.com Buy(maintain) 목표주가: 1,원(유지) 현주가(3/23): 62,1원 Stock Data KOSPI(3/23) 2,26.83pt 시가총액 12,944억원 발행주식수 2,843천주 52주 최고가 / 최저가 84,9 / 59,5원

More information

³»ÁöÀÛ¾÷-~89š

³»ÁöÀÛ¾÷-~89š PISTON PUMPS A Series Variable Displacement Piston Pumps Pressure Compensator Type A16-L-R-01-B-K-32 11 Solenoid Two Pressure Control Type A22-L-R-02-S-K-A100-32 12 Pressure Compensator with Unloading

More information

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc 0. B0 Breaker ) Main Body(Standard) 메인바디 ( 표준 ) a) Exploded view of B0 Breaker Main Body B0 브레이카메인바디분해도 9 0 0 0-7 7 (Valve Case Ass'y) 9 9 0 9 9 9 7 0 9 0 7 9 7 9 0 0 b) B0 Main Body Parts List B0 메인바디파트리스트

More information

07라일랍스카탈로그24p 완성본

07라일랍스카탈로그24p 완성본 REFAIR / AS : tel.053-523-5768 fax.053-523-5763 82, Gongdan 5-ro, Jillyang-eup, Gyeongsan-si, Gyeongsangbuk-do, 38474, Rep. of KOREA tel.+82-53-523-5768 fax.+82-53-523-5763 www.lailaps.co.kr www.lailaps.co.kr

More information

Abstract Musculoskeletal Symptoms and Related Factors for Nurses and Radiological Technologists Wearing a Lead Apron for Radiation Pro t e c t i o n Jung-Im Yoo, Jung-Wan Koo 1 ) Angio Unit, Team of Radiology,

More information

page 1end

page 1end C 0.0.2 ma Cr 14.5~16.5 Co 2.5 max Iron 4~7 Mn 1 max Mo 15 ~ 17 Ni Balance P 0.03 max Si 0.08 max S 0.03 max W 3 ~ 4.5 V 0.35 max 8.89g/cm 3 Multipurpose corrosion resistance of NickelMolybdenumChrome.

More information

5. Kapitel URE neu

5. Kapitel URE neu URE Fuses for Semiconductor Protection European-British Standard Standards: IEC 60 269-4 BS 88-4 Class: ar Voltage ratings: AC 240 V AC 700 V Current ratings: 5 A 900 A Features / Benefits High interrupting

More information

Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE

Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE ...1...1 1....2 1-1... 2 1-2... 2 1-3... 3 1-4... 3 1-5... 4 1-6... 4 1-7... 5 1-8... 5 1-9... 6 2....7 2-1... 7 2-2... 7 2-3 Cl2 tablet...

More information

Å©·¹Àγ»Áö20p

Å©·¹Àγ»Áö20p Main www.bandohoist.com Products Wire Rope Hoist Ex-proof Hoist Chain Hoist i-lifter Crane Conveyor F/A System Ci-LIFTER Wire Rope Hoist & Explosion-proof Hoist Mono-Rail Type 1/2ton~20ton Double-Rail

More information

FISHING PORT PRODUCTS CAR STOPPER l WHARF EDGE PROTECTOR l STAINLESS BOLLARD l SATETY LADDER TIRE FENDER l DESIGN FENCE l OTHER PRODUCTS 대아엠에스

FISHING PORT PRODUCTS CAR STOPPER l WHARF EDGE PROTECTOR l STAINLESS BOLLARD l SATETY LADDER TIRE FENDER l DESIGN FENCE l OTHER PRODUCTS 대아엠에스 FISHING PORT PRODUCTS CAR STOPPER l WHARF EDGE PROTECTOR l STAINLESS BOLLARD l SATETY LADDER TIRE FENDER l DESIGN FENCE l OTHER PRODUCTS 대아엠에스 FISHING PORT PRODUCTS ➏ ➊ ➌ ➊ CAR STOPPER ➋ WHARF EDGE PROTECTOR

More information

KAERI/TR-2128/2002 : SMART 제어봉구동장치 기본설계 보고서

KAERI/TR-2128/2002 : SMART 제어봉구동장치 기본설계 보고서 KAERI =100,000 25 20 Force, [kn/m^2] 15 10 5 0 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 b/a I = 1500[ AT ], a + b = 16[ mm], hr = 5.6[ mm], hδ = 11.2[ mm], δ = 0.35[

More information

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc

Microsoft Word _B _alicon Part List_Eng&Kor 내지 A4 Ver.3.doc . B00 Breaker ) Main Body(Standard) 메인바디 ( 표준 ) a) Exploded view of B00 Breaker Main Body B00 브레이카메인바디분해도 7 9 7 0-0 9 7 9 (Acc. Ass'y) 0 7 (Valve Case Ass'y) 0 9 7 7 7 7 0 0 7 9 7 9 0 0 0 b) B00 Main Body

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할 저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

ISO17025.PDF

ISO17025.PDF ISO/IEC 17025 1999-12-15 1 2 3 4 41 42 43 44, 45 / 46 47 48 49 / 410 411 412 413 414 5 51 52 53 54 / 55 56 57 58 / 59 / 510 A( ) ISO/IEC 17025 ISO 9001:1994 ISO 9002:1994 B( ) 1 11 /, / 12 / 1, 2, 3/ (

More information

14È£À¯½Åȸº¸¸ñÂ÷.ps

14È£À¯½Åȸº¸¸ñÂ÷.ps A study on tunnel cross-section design for the Honam high speed railway Unlike a conventional railway system, a high-speed rail system experiences various aerodynamic problems in tunnel sections. Trains

More information

D101351X0KR_May17

D101351X0KR_May17 646 Fisher 646... 1... 1... 3... 4... 4... 4... 5... 5... 5... 6... 7... 7... 7... 9... 9... 9... 9... 10... 11... 12... 12... 13... 15... 15... 15 1. Fisher 646 Fisher 646,,..,,,, 646,.,,.. W6783 1 www.fisher.com

More information

Corporation Limited MODEL 제 품 제 원 스텐레스장축 NS_100 10A -사용압력 : 5.0 MPa -사용온도: -196 ~+60 -사용유체 : LN₂, LO₂, LAr, -사용용도 : 초저온배관, 초저온 저장탱크, 기타 50A Cryogenic

Corporation Limited MODEL 제 품 제 원 스텐레스장축 NS_100 10A -사용압력 : 5.0 MPa -사용온도: -196 ~+60 -사용유체 : LN₂, LO₂, LAr, -사용용도 : 초저온배관, 초저온 저장탱크, 기타 50A Cryogenic ( 주 ) 엔에스티이 GAS MARKET Corporation Limited MFR Cryogenic Valve Multi-Functional Regulator for Cryogenic Storage -MFR-ELP( 감압 / 승압기능 ) -MFR-EL( 기액절제방식감압 ) MC 500 Regulator (sus belows type) - 대유량 (300~700N

More information

Introduction to Maxwell/ Mechanical Coupling

Introduction to Maxwell/    Mechanical Coupling ANSYS 통합해석환경을이용한전기자동차용모터성능해석 ANSYS Korea Byungkil KIM, Soohyun PARK, Jeongwon LEE, Cheonsoo JANG* 1 목차 모터설계에적용되는 ANSYS 제품군역할 모터성능해석 1 : 진동 / 소음 모터성능해석 2 : 피로수명 모터성능해석 3 : 충격강도 2 모터설계에적용되는 ANSYS 제품역할 모터설계에서고려되어야하는기초성능

More information

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged

More information

- 2 -

- 2 - - 1 - - 2 - 전기자동차충전기기술기준 ( 안 ) - 3 - 1 3 1-1 3 1-2 (AC) 26 1-3 (DC) 31 2 37 3 40-4 - 1 14, 10,, 2 3. 1-1 1. (scope) 600 V (IEC 60038) 500 V. (EV : Electric Vehicle) (PHEV : Plug-in Hybrid EV).. 2. (normative

More information

ÇѱÛÇ¥Áö

ÇѱÛÇ¥Áö KOSA KOSA KOSA KOSA KOSA Assembly, Engineering Plastic KOSA Accessory Content KOSA Overview K-004 Technical Data K-006 KA40B with Timing Belt Drive K-008 KA60B with Timing Belt Drive K-010 KA60S with Ball

More information

사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서 제품을 사용하지 마십시오. 3.이 제품은

사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서 제품을 사용하지 마십시오. 3.이 제품은 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 사용자설명서 TourBus 0 & TourBus 5 사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서

More information

12(4) 10.fm

12(4) 10.fm KIGAS Vol. 12, No. 4, December, 2008 (Journal of the Korean Institute of Gas) l x CNG» v m s w ½ Á y w» œw (2008 9 30, 2008 12 10, 2008 12 10 k) Numerical Analysis for Temperature Distribution and Thermal

More information

슬라이드 제목 없음

슬라이드 제목 없음 물리화학 1 문제풀이 130403 김대형교수님 Chapter 1 Exercise (#1) A sample of 255 mg of neon occupies 3.00 dm 3 at 122K. Use the perfect gas law to calculate the pressure of the gas. Solution 1) The perfect gas law p

More information

KC CODE KCS 국가건설기준표준시방서 Korean Construction Specification KCS : 2017 상수도공사 공기기계설비 2017 년 8 월일제정 국가건설기준

KC CODE KCS 국가건설기준표준시방서 Korean Construction Specification KCS : 2017 상수도공사 공기기계설비 2017 년 8 월일제정   국가건설기준 KC CODE KCS 57 80 20 국가건설기준표준시방서 Korean Construction Specification KCS 57 80 20 : 2017 상수도공사 공기기계설비 2017 년 8 월일제정 http://www.kcsc.re.kr 국가건설기준 목차 KCS 57 80 20 상수도공사공기기계설비 1. 일반사항 1.1 적용범위,,,,,,, 1.2 참고기준

More information