Microsoft PowerPoint - 4M승인원_LGIT_LGP55-13PL2(EAY )_REV3.0
|
|
|
- 수아 호
- 7 years ago
- Views:
Transcription
1 Scanning LIB. Safety SPECIFICATION FOR APPROVAL RoHS CUSTOMER ITEM : LG Electronics inc. : Power Supply Unit. P/NO Model Name Customer Supplier LGP55-13PL2 EAY PLDK-L208A DATE Revision : : 3.0 Remark : MP (PCB REV 3.0) Producing District : YANTAI, CHINA ( 중국연태 ) ( 생산지 ) WROCLAW, POLAND ( 폴란드브루츠와프 ) Safety Standard Parts [ 안전규격부품 List ] Power Cord, Power Plug, X/Y-Capacitor, Power Switch, Fuse, SMPS Trans, Stand-By Trans, Photo coupler, Insulation( 절연 ) Resistor, Discharge( 방전 ) Resistor, Fusing Resistor, FBT.CPT, CPT Socket, DY, D-Coil, Line Filter, PCB Material, Front / Back-cover Material Relay(1-2차간 ), Varistor, Adapter EMC Standard Parts [ 전자규격부품 List ] Power Plug, Line Filter, X-Capacitor, Y-Capacitor, SMPS Trans, Tuner, Saw-Filter, Shield Case, Oscillator, Pattern Change Green [ 유해물질확인사항 ] This item must meet the standards of LG Electronics for six major substances as designated by RoHS for control. (Cd: 10ppm under, Pb/Hg/Cr+6/PBB/PBDE: 100 ppm under) LG Innotek Co., Ltd LG Twin Tower 33/34F, Yeouido-dong, Yeongdeungpo-gu, Seoul, Korea Tel. : Fax. :
2 Documentation For Approval Model Name Customer Supplier LGP55-13PL2 EAY PLDK-L208A Written Checked Approved J.S Lee K.T Choi S.H JANG 2
3 Contents NO. A table of contents Page 1 Documentation of Approval 1~2 2 Contents 3 3 Revision History 4~8 4 CTQ Management 9 5 Specification 1. INTRODUCTION 2. SPECIFICATION 2.1 Input Requirements 2.2 Power Output Characteristics 2.3 Environment Requirement 2.4 Dielectric Strength Voltage and Insulation Resistance 2.5 Burn-in 2.6 Interface 2.7 Product Safety 2.8 Construction 2.9 Function of protection 2.10 Sound Noise Characteristics Connector Specification 2.12 PCB Dimension Apply to Eyelet point Electrical Characteristics 2.15 Mechanical Characteristics 10~20 6 Schematic Diagram 21~23 7 Block Diagram 24~25 8 Parts List 26~32 9 Process Marking 33~34 10 PCB Layout 35~39 11 Safety Parts 40~42 12 Mechanical Drawing 43~45 13 Packing Drawing 46~51 14 Bar-code Label Drawing 52~53 15 Labeling Point 54~55 16 Workmanship Point 56~57 17 Manufacturing Process (Flow-Chart) 58~61 18 * Appendix 1. Power Check list 2. Warranty letter 62~ 3
4 Revision History Rev No. Contents Date of Approval Checked Remark 0.1 Apply to PV (PCB REV 0.2) PCB P/No : EAX (1.4) K. T Choi PV 1st Edition. 0.2 Apply to PV (PCB REV 0.21) PCB P/No : EAX (1.5) K. T Choi PV 2nd Edition. 1.0 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi MP 1st Edition - Add UL Mark 1.1 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi 1.Change production site of LGIT Trans - LGIT Yantai CLOVER Mundeung OEM 2.Change EL63 : Eyelet Gripper in order to improve workmanship 1.2 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi 1. Delete the POLYESTER FILM TAPE company of Transformer : METAL LINE CO., LTD 1.3 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi 1. Improve Audio Noise : Change Bonding position & Side Bond Material - Item : 13S-DD04, 13S-DD03 - Location : L801,L802 1) Before : Silicon bond 4 Point + Center Bond 4
5 Rev No. Contents Date of Approval Checked Remark 1.3 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi 2) After : Silicon bond 2 Point + Three bond 6 Point 4M Change process 1) Responsibility of 4M change : LGE 2) Running Change : YES (Minor) 3) Goods of Stock : No Re-Work 1.4 Apply to MP (PCB REV 1.0) PCB P/No : EAX (1.6) K. T Choi 1. Update Part list : Resister components vendors which LGIT can use. 2. Update CCL : Resister PCB vendors which LGIT can use. 3. Change supplier company from SENSITRON to SMC 4M Change process 1) Responsibility of 4M change : LGE 2) Running Change : Apply immediately 3) Goods of Stock : No Re-Work 5
6 Rev No. Contents Date of Approval Checked Remark 2.0 Apply to MP (PCB REV 2.0) PCB P/No : EAX (1.8) K. T Choi 1. Change of PCB (Revision ) : To improve productivity : To ensure safety distance : To improve Diode Forming productivity < Change List > - SK101 insert hole shape change (circle oval) - Change of D252,D253 Forming type (Triangular Forming Straight Forming) - Change D804 Forming type (Triangular Forming Straight Forming) - Ready SMD supporters HD101,HD102 on PCB only 2. Improve mechanical matching for Ground Pin and Ground Tab Spec. - Item : AC socket (DAC-18C3M1) - Location : SK100 - Issue : Change Ground Pin and Ground Tab Spec. 1) Ground PIN Spec : 2.36 ± ± ) Ground TAP Spec : 2.5 ± ± M Change process 1) Responsibility of 4M change : LGE 2) Running Change : YES 3) Goods of Stock : No Re-Work 6
7 Rev No. Contents Date of Approval Checked Remark 2.1 Apply to MP (PCB REV 2.0) PCB P/No : EAX (1.8) K. T Choi 1. Change AC socket to prevent PL (Product liability) problem - Location : SK100 - DAC-18C3M1 DAC-18C3M1C (with cover) 4M Change process 1) Responsibility of 4M change : LGE 2) Running Change : YES 3) Goods of Stock : No Re-Work 2.2 Apply to MP (PCB REV 2.0) PCB P/No : EAX (1.8) K. T Choi 1. Add RTV Bond Maker - Maker : DAEHEUNG CHEMICAL CO.,LTD. - Specification : SR Change Packing Drawing : Change LG INNOTEK Logo size 4M Change process 1) Responsibility of 4M change : LGIT 2) Running Change : YES 3) Goods of Stock : No Re-Work 7
8 Rev No. Contents Date of Approval Checked Remark 3.0 Apply to MP (PCB REV 3.0) PCB P/No : EAX (1.9) K. T Choi 1.Change Diode to prevent RENESAS PFC IC #5 CS Pin dead - Change Location : D607 ZD602 - SMD Diode (SOD-123) SMD Zener Diode (SOD-123) - Change PCB only silk 1) Top Silk : Revision ( ) 2) Bottom Silk : Location Number (D607 ZD602) 4M Change process 1) Responsibility of 4M change : LGE 2) Running Change : NO (Apply Immediately) 3) Goods of Stock : No Re-Work 8
9 CTQ Management No. Contents Page Power Factor Power Output Characteristics Stand by Power Consumption 12 9
10 Specification 10
11 1. INTRODUCTION 1.1 Scope This approval is the description related to every electrical and structural specifications and reliability For Power Supply Unit used on 55 inch LGE LED TV. 1.2 Customers product related items Product : Power Supply Unit Part code : EAY Product name Product name : PLDK-L208A Revision code : SPECIFICATION 2.1 Input Requirements Nominal Input Voltage Input Voltage Variation Input Current Nominal Frequency Frequency Variation Range Phase Leakage Current Surge Immunity Hold-up Time Lightning Surge Inrush Current AC 100V to AC 240V AC 90V to AC 264V Under 2.5Arms. (at 100Vac & Nominal Load) Under 1.2Arms. (at 240Vac & Nominal Load) 50 / 60 Hz 47 Hz to 63 Hz Single 0.35mA_peak. (100Vac ~ 240Vac) ± 4kV / 1000ns / 0 to 360 More than 20ms at 100Vac and maximum output load When it doesn t meet 20ms hold up time, 1. PSU restarts. 2. No hardware failure.(all components) 2kA Normal, Common Mode 80A zero-peak max at cold start and any specified line, load, temperature conditions Power Factor over than 0.9 at Vac & max load condition 11
12 2.2 Power Output Characteristics Output Voltage Variable range [V] Rated Current (Min, Max) [Amean] Voltage Regulation [V] Ripple Voltage [mvp_p] 3.5V (STBY) 3.325V ~ 3.675V 0.3W Under (15mA) A (0.2~1.4A) (ON condition) ± 5% 250 mvp_p 12V 11.4V ~ 12.6V 1.4A (0.2~1.4A) ± 5% 350 mvp_p 24V 22.8V ~ 25.2V 0.6A (0.1~0.6A) ± 5% 500 mvp_p LED B+ 156~180V 0.33A (0.313~0.347A) 117~135V 0.33A (0.313~0.347A) ± 5% - * On Condition : In a moment of Power_ON Signal activated, the current of 3.5V output should be limited within 40mA(Max) at LCD TV condition for stability. Do not turn Power_ON Signal on at the load condition of 3.5V output, more than 40mA. * Total regulation for each output circuit includes the results of input voltage variation, load variation, warm-up drift and temperature change. * The following instruments shall be used for measuring ripple noise. 1. Probe having impedance ratio of 1:1. 2. Oscilloscope having frequency characteristic of 100MHz or more. Test Point : power output each pin Add Electrolytic Capacitor 47 μf μf Power Supply Unit Output Voltage + Load 700mm Oscilloscope Measurement point Ripple and noise are measured at the end of output cable which are added a 0.1uF ceramic capacitor and 47uF electrolytic capacitor. ( connected parallel ) Stand By Power Consumption Output Voltage 3.5V (STBY) 12V 24V Load [A] Don t Care (Power-Off) Wattage [W] Less than 0.3W Under (230Vac / 50Hz) 12
13 2.3 Environment Requirement Operating Temperature Range -10 to 40 (60 :No Hardware Failure, TV SET Condition) Operating Humidity Range 30 to 85 % Storage Temperature Range -25 to 85 deg. Storage humidity Range 5 to 90 % Power board Storage Condition Temperature 40, Humidity 90% MTBF (Mean Time Between Failure) Cooling Condition Shock 50,000 hour Natural Air 98 m s2 Shock test consists of pivoting the power supply, from one edge of it s bottom side, on a flat surface (such as wood having thickness of 10mm or more) and allowing the opposite edge to fall from a height of 50mm to this surface. The test is performed three times on each edge of the bottom side of the power supply 2.4 Dielectric Strength Voltage and Insulation Resistance Safety Dielectric Strength Voltage Insulation Resistance AC 1.5KV or DC 2,121V 1 Min 10 ma (Test SPEC) AC 1.8KV 1 Sec 10 ma (PSU Mass Production) Between Primary and All Secondary Circuits. Insulation resistance shall be more than 8M ohm (at DC 500V) Between Primary Live, Neutral line and Secondary. * Above tests are performed at room temperature in non-condensing atmospheric conditions * Frame grounds are connected to secondary circuits. 2.5 Burn-in More than 2 hours at 45 (±5 ), Normal input voltage. AC on/off must be test 1 time after burn-in. 80% Load of specification. 13
14 2.6 Interface Appellation Explanation Signal Direction Action POWER ON Vcc Circuit ON/OFF Input High : Vcc ON Low : Vcc OFF 2.7 Product Safety Safety Safety Standards to be applied EMI/RFI Standards to be applied Design to meet the requirements as follows UL60950, IEC60950, IEC60065 and Design to meet the requirements as follows FCC and EN55020, EN55013 Class B with 4dB minimum margin. 2.8 Construction Weight Unit Size (typ.) Less than 400g 159(W) X 240(D) X 26.1(H) 2.9 Function of protection Protection Over Current Short Circuit Output Circuit Trip point Min Max Notes STBY 3.5V 1.8A 5.0A Auto Re-start 12V 4.0A 15.0A Latch 24V 2.5A 8.0A Latch STBY 3.5V - - Auto Re-start 12V - - Latch 24V - - Latch * This Power Supply has above-mentioned protections. * Short circuit protection between different output terminals is not considered. * Trip point for over voltage indicates the operating point when the output voltage slowly increases. * The conditions of Over Current measurement Multi output(3.5v,12v,24v) is nominal load state except an over current measurement. 14
15 2.10 Sound Noise Characteristics. PSU Noise Specification 22.5 db(a) / 20.u Pa 2.0E-5 Pa (1/1 octave, A-weighting, to 1khz ~ 16khz Total overall Measure Location : Anechoic Room Measure Condition : At a distance of 60cm mic Full white pattern, at AC 110V/220V The max specification (measure 3 points, at PSU center and left & right on the side) 15
16 2.11 Connector Specification Connectors Usage SK100 DONGIL TECH (DAC-18C3M1) P801 YEONHO (SMA200W-H07AA2) Pin No. Assignment Pin No. Assignment 1 LIVE 2 GND 3 NEUTRAL 1 LED- 2 Remove 3 LED Remove 5 LED- 6 Remove 7 LED+ P201 YEONHO (SMAW200-H18S2) Pin No. Assignment Pin No. Assignment 1 Power on 2 DRV-ON 3 3.5V 4 PDIM V 6 PDIM2 7 GND 8 GND 9 24V 10 24V 11 GND 12 GND 13 12V 14 12V 15 12V 16 N.C 17 GND 18 GND 16
17 2.12 PCB Dimension. 1) Power board PCB : 159mm 240mm 1.6(T)mm 2) Component height : Max 22.0mm (Except LF101, LF102 : Max 23.0mm) 3) Lead Cutting : Max 2.5mm 4) PCB Material : FR-1 KB,DS,L,R-8700 CTI MAX
18 2.13 Apply to the Eyelet point. Apply to the Eyelet point 2.0Φ : EL1,EL2,EL9,EL10,EL11,EL12,EL15,EL16,EL17,EL18,EL19,EL20,EL23,EL24,EL25, EL26,EL35,EL36,EL37,EL38,EL49,EL50,EL56,EL59,EL60,EL69,EL70,EL71,EL72 (29EA) Apply to the small Eyelet point 1.6Φ : EL3,EL4,EL5,EL6,EL7,EL8,EL13,EL14,EL21,EL22,EL27,EL28,EL29,EL30,EL31, EL32,EL33,EL34,EL39,EL40,EL41,EL42,EL43,EL44,EL45,EL46,EL47,EL48,EL51, EL57,EL58,EL64,EL66 (33EA) Apply to Gripper Point 1.6ø * 2.6L : EL63 (1EA) 18
19 2.14 Electrical Characteristics No. Test Item Test method Intermittent Operation stability Test Low temperature operation Low temperature Storage test Leave At low temperature The switching regulator shall ON/OFF for 20,000 time at an Interval of 10 sec at maximum load, after that electrical Characteristics shall be satisfied. The switching regulator is left at the operating guarantee Minimum temperature for 2 hours without applying electricity. After that power shall be turned on, and then the electrical Characteristics shall be satisfied. The switching regulator is left at minimum storage Temperature for 96 hours or more. Then the switching regulator is left at a room temperature and humidity for 1 hour or more, after that electrical characteristics shall be satisfied. The switching regulator is 10 consecutive temperature cycle that shown below is performed and then leave them at room temperature and humidity for 1 hour or more. After that, electrical characteristics shall be satisfied. Time Temperature 4 Heat cycle storage test 30 minutes minutes 25 -> minutes Minimum storage temperature (-20 ) 30 minutes -20 -> minutes minutes 25 -> minutes Maximum storage temperature (70 ) 30 minutes 70 -> 25 5 Heat shock test Heat shock test performed under following conditions without applying electricity and then leave them at room temperature and humidity for 1 hour or more. After that, electrical characteristics shall be satisfied. Condition : -45 (30minutes), 120 (30minutes), Switching time : Less than 5 minutes, 200 cycles. 19
20 2.15 Mechanical Characteristics No. Test Item Test method 1 Appearance There shall be no contaminant or dirt on the switching regulator which has adverse effect on electrical characteristics. There shall be no excessive unevenness or scratches on the plated or painted surface. While applying electricity : Vibration frequency : 5 ~ 100Hz Acceleration : 4.9 m/s 2 Vibration in X,Y,Z direction for 30 minutes 2 Vibration While applying electricity : Vibration frequency : 5 ~ 100Hz Acceleration : 14.7 m/s 2 Vibration in X,Y,Z direction for 30 minutes After that electrical characteristics shall be satisfied. There shall be no damage to appearance and construction. Shock : 98 m/s 2 3 Shock On the oak more than 10mm thickness with the flat face, raise the one side for 50mm, and it carries out each side free fail for three sides. There shall be no damage to appearance and construction. 20
21 Schematic Diagram 21
22
23
24 Block Diagram 24
25 INPUT (AC V) EMI FILTER RECTIFIER ON/OFF CONTROL PFC BOOST STBY SWITCHING RECTIFIER & FILTER MAIN SWITCHING PWM CONTROL PHOTO COUPLER PHOTO COUPLER PHOTO COUPLER ON/OFF CONTROL OUTPUT F/B CONTROL RECTIFIER & FILTER BOOST CONVERTER RECTIFIER & FILTER RECTIFIER & FILTER RECTIFIER & FILTER OUTPUT F/B CONTROL LED DRIVER (DRV-IC, FET) POWER ON/OFF ST3.5V LED DRIVER ON/OFF 12.0V 24.0V 25
26 Parts List 26
27 LGP55-13PL2 (EAY ) REV P/N Product New part L/V Q'ty UNIT LOCATION SPECIFICATION DESCRIPTION MAKER Maker history 3.0 EAY LGIT MI DIODE ASS'Y HEAT SINK ASS'Y 3.0 EAY LGIT MI 1 EA HS1 HS1 (30X15X18.3) HEAT SINK YUWON NRT 3.0 EAY LGIT MI 1 EA HS1 HS1 (30X15X18.3) HEAT SINK HUAPENG 3.0 EAY LGIT MI 1 EA HS1 HS1 (30X15X18.3) HEAT SINK GUOTAI 3.0 EAY LGIT MI 2 EA D252,D253 SDURF1030CT 300V 10A ITO-220AB DIODE SMC 2013Y 3.0 EAY LGIT MI 2 EA D252,D253 U10A3CIC 300V 10A TO-220IS DIODE KEC 2013Y 3.0 EAY LGIT MI 2 EA FOR D252,D253 BHM Screw, M3.0 * 6.0L, w ith Clamfix, Cr3+WH Plating SCREW SEOUL METAL 3.0 EAY LGIT MI 2 EA FOR D252,D253 BHM Screw, M3.0 * 6.0L, w ith Clamfix, Cr3+WH Plating SCREW ASEA BOLT 3.0 EAY LGIT MI 2 EA FOR D252,D253 BHM Screw, M3.0 * 6.0L, with Clamfix, Cr3+WH Plating SCREW SUNG HO METAL 3.0 EAY LGIT MI 0.02 GR FOR D252,D253 HC300 SILICON GREASE CHANG AMLS 3.0 EAY LGIT MI 0.02 GR FOR D252,D253 DS-323 SILICON GREASE DONGYANG SILICON 3.0 EAY LGIT MI FET / DIODE ASS'Y HEAT SINK ASS'Y 3.0 EAY LGIT MI 1 EA HS2 HS1 (30X15X18.3) HEAT SINK YUWON NRT 3.0 EAY LGIT MI 1 EA HS2 HS1 (30X15X18.3) HEAT SINK HUAPENG 3.0 EAY LGIT MI 1 EA HS2 HS1 (30X15X18.3) HEAT SINK GUOTAI 3.0 EAY LGIT MI 1 EA D804 SDURF1030CT 300V 10A ITO-220AB DIODE SMC 2013Y 3.0 EAY LGIT MI 1 EA D804 U10A3CIC 300V 10A TO-220IS DIODE KEC 2013Y 3.0 EAY LGIT MI 1 EA Q804 STF10NM60N 650V 10A TO-220FP FET STM 3.0 EAY LGIT MI 1 EA Q804 TK10A60D 600V 10A TO-220F FET TOSHIBA 3.0 EAY LGIT MI 1 EA Q804 IPA60R600E6 600V 7.3A TO-220FP FET INFINION 3.0 EAY LGIT MI 2 EA FOR D804,Q805 BHM Screw, M3.0 * 6.0L, w ith Clamfix, Cr3+WH Plating SCREW SEOUL METAL 3.0 EAY LGIT MI 2 EA FOR D804,Q805 BHM Screw, M3.0 * 6.0L, w ith Clamfix, Cr3+WH Plating SCREW ASEA BOLT 3.0 EAY LGIT MI 2 EA FOR D804,Q805 BHM Screw, M3.0 * 6.0L, with Clamfix, Cr3+WH Plating SCREW SUNG HO METAL 3.0 EAY LGIT MI 0.02 GR FOR D804,Q805 HC300 SILICON GREASE CHANG AMLS 3.0 EAY LGIT MI 0.02 GR FOR D804,Q805 DS-323 SILICON GREASE DONGYANG SILICON 3.0 EAY LGIT MI LGP55-13PL2 MI COMPONENTS MI ASS'Y 3.0 EAY LGIT MI 2 EA BD101,BD102 KBJ1006G 600V 10A DIODE LITEON 3.0 EAY LGIT MI 2 EA BD101,BD102 D10XB60 600V 10A DIODE DACHANG 3.0 EAY LGIT MI 2 EA BD101,BD102 D10XB60 600V 10A DIODE SHINDENGEN 3.0 EAY LGIT MI 1 EA C610 KMF 100uF 450V M RB P7.5 Φ18x35.5 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT MI 1 EA C610 SK 100uF 450V M RB P7.5 Φ18X35.5 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT MI 2 EA CX101,CX102 PCX uF 275V P15 CAPACITOR, FILM PILKOR 3.0 EAY LGIT MI 2 EA CX101,CX102 MPX 0.33uF 275V P15 CAPACITOR, FILM EUROPTRONIC 3.0 EAY LGIT MI 1 EA C601 MP 0.82uF 500V J P15 CAPACITOR,FILM LUMEN 3.0 EAY LGIT MI 1 EA C601 PCMP uF 500V J P15 CAPACITOR,FILM PILKOR 3.0 EAY LGIT MI 1 EA C601 MPHB 0.82uF 500V J P15 CAPACITOR,FILM EUROPTRONIC 3.0 EAY LGIT MI 1 EA C114 NP 0.033uF 800V J P15 CAPACITOR,FILM LUMEN 3.0 EAY LGIT MI 1 EA C114 PCMP uF 800V J P15 CAPACITOR,FILM PILKOR 3.0 EAY LGIT MI 1 EA C114 MPLB 0.033uF 1000V J P15 CAPACITOR,FILM EUROPTRONIC 3.0 EAY LGIT MI 2 EA D601,D602 S3V60 600V 3.5A P20 DIODE SHINDENGEN 3.0 EAY LGIT MI 2 EA D601,D602 30PDA60 600V 3A P20 DIODE NI 3.0 EAY LGIT MI 3 EA D201,D255,D256 SB560 60V 5A P20 DIODE DACHANG 3.0 EAY LGIT MI 3 EA D201,D255,D256 SB560 60V 5A P20 DIODE LITEON 3.0 EAY LGIT MI 1 EA D603 STTH10LCD06 600V 10A TO-220F DIODE STM 3.0 EAY LGIT MI 1 EA D603 BYV29FX V 9A TO-220F DIODE NXP 3.0 EAY LGIT MI 1 EA D251 MBRF10100CT 100V 10A ITO-220AB DIODE SMC 3.0 EAY LGIT MI 1 EA D251 MBRF10U100CT 100V 10A TO-220IS DIODE KEC 3.0 EAY LGIT MI 1 EA F100 T6.3A H 250V 215 BROWN(1-LINE) FUSE, TIME LAG LITTELFUSE 3.0 EAY LGIT MI 1 EA F100 T6.3A H 250V 50CT BROWN(1-LINE) FUSE, TIME LAG Dainfuse 3.0 EAY LGIT MI 1 EA F101 F3.15A H 250V 216 VIOLET(2-LINE) FUSE, FAST ACTING LITTELFUSE 3.0 EAY LGIT MI 1 EA F101 F3.15A H 250V 50CF VIOLET(2-LINE) FUSE, FAST ACTING Dainfuse 3.0 EAY LGIT MI 3 EA IC102,IC502,IC503 EL817MB(DT) IC EVERLIGHT 3.0 EAY LGIT MI 3 EA IC102,IC502,IC503 LTV817M-BN IC LITEON 3.0 EAY LGIT MI 1 EA IC501 ICE3BR4765JZ DIP-8 IC INFINEON 3.0 EAY LGIT MI 2 EA TH101,TH102 DSC2.5D15 2.5Ω 8A Φ15 IN, OUT FORMING RESISTOR, NTC DSC 3.0 EAY LGIT MI 1 EA PG101 Rug Ground SPCC 0.4t Cusn Plating GND REINFORCE LEZHI 3.0 EAY LGIT MI 1 EA L601 LP uH EER3019 TRANSFORMER FEELUX 3.0 EAY LGIT MI 1 EA L601 LP uH EER3019 TRANSFORMER SOOJUNG 3.0 EAY LGIT MI 1 EA L801 13S-DD04 110uH EFD2020 CHE FEELUX 2013Y 3.0 EAY LGIT MI 1 EA L801 13S-DD04 110uH EFD2020 CHE SOOJUNG 2013Y 3.0 EAY LGIT MI 1 EA L802 13S-DD03 150uH EFD2020 CHE FEELUX 2013Y 3.0 EAY LGIT MI 1 EA L802 13S-DD03 150uH EFD2020 CHE SOOJUNG 2013Y 3.0 EAY LGIT MI 1 EA LF101 LLF-124, 28mH LINE FILTER FEELUX 3.0 EAY LGIT MI 1 EA LF101 LLF-124, 28mH LINE FILTER SOOJUNG 3.0 EAY LGIT MI 1 EA LF101 CV620280SH(HF), 28mH LINE FILTER TNC 3.0 EAY LGIT MI 1 EA LF101 LSD020280, 28mH LINE FILTER DONG IL TECH 2013Y 3.0 EAY LGIT MI 1 EA LF102 LLF-100, 7.7mH SQ2424 LINE FILTER FEELUX 3.0 EAY LGIT MI 1 EA LF102 LLF-100, 7.7mH SQ2424 LINE FILTER SOOJUNG 3.0 EAY LGIT MI 1 EA T101 13S-LM06 440uH SRV3820 TRANSFORMER FEELUX 2013Y 3.0 EAY LGIT MI 1 EA T101 13S-LM06 440uH SRV3820 TRANSFORMER SOOJUNG 2013Y 3.0 EAY LGIT MI 1 EA T101 13S-LM06 440uH SRV3820 TRANSFORMER TDK 2013Y 3.0 EAY LGIT MI 1 EA T101 13S-LM06 440uH SRV3820 TRANSFORMER LGIT 2013Y 3.0 EAY LGIT MI 1 EA T501 12S-LS01 1.1mH EE1918 TRANSFORMER FEELUX 3.0 EAY LGIT MI 1 EA T501 12S-LS01 1.1mH EE1918 TRANSFORMER SOOJUNG 3.0 EAY LGIT MI 1 EA T501 12S-LS01 1.1mH EE1918 TRANSFORMER CLOVER HITECH 3.0 EAY LGIT MI 1 EA T501 12S-LS01 1.1mH EE1918 TRANSFORMER TDK 3.0 EAY LGIT MI 1 EA VA101 INR14D621K-CAP 620V Φ14 TUBE VARISTOR AMOTECH 3.0 EAY LGIT MI 1 EA VA101 SVC621D-14ATW7 620V Φ14 TUBE VARISTOR SAMWHA 3.0 EAY LGIT MI 1 EA SK100 DAC-18C3M1 BLACK AC SOCKET DONGIL TECH 2013Y 3.0 EAY LGIT MI 1 EA SK100 DAC-18C3M1C (w ith cover) BLACK AC SOCKET DONGIL TECH 2013Y 3.0 EAY LGIT MI 1 EA P201 SMAW200-H18S2 18PIN WHITE WAFER YEONHO 2013Y 3.0 EAY LGIT MI 1 EA P801 SMAW200A-H07AA2 4PIN WHITE WAFER YEONHO 2013Y 3.0 EAY LGIT SMT LGP55-13PL2 SMD COMPONENT SMT ASS'Y 3.0 EAY LGIT SMT 2 EA C804,C pF 50V J 1608 COG CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 2 EA C804,C pF 50V J 1608 COG CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 2 EA C804,C pF 50V J 1608 COG CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 2 EA C804,C pF 50V J 1608 COG CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA C809,C pF 50V J 1608 COG CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 2 EA C809,C pF 50V J 1608 COG CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 2 EA C809,C pF 50V J 1608 COG CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 2 EA C809,C pF 50V J 1608 COG CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA C pF 50V J 1608 COG CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 1 EA C pF 50V J 1608 COG CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 1 EA C pF 50V J 1608 COG CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 1 EA C pF 50V J 1608 COG CAPACITOR, CHIP YAGEO 27
28 3.0 EAY LGIT SMT 12 EA C107,C116,C253,C504,C607, C608,C816,C817,C818,C820, 1000pF 50V K 1608 X7R CAPACITOR, CHIP MURATA C824,C EAY LGIT SMT 12 EA C107,C116,C253,C504,C607, C608,C816,C817,C818,C820, 1000pF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA C824,C EAY LGIT SMT 12 EA C107,C116,C253,C504,C607, C608,C816,C817,C818,C820, 1000pF 50V K 1608 X7R CAPACITOR, CHIP TDK C824,C EAY LGIT SMT 12 EA C107,C116,C253,C504,C607, C608,C816,C817,C818,C820, 1000pF 50V K 1608 X7R CAPACITOR, CHIP YAGEO C824,C EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA C111,C uF 50V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 2 EA C111,C uF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 2 EA C111,C uF 50V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 2 EA C111,C uF 50V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 1 EA C uF 50V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA C821,C uF 50V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 2 EA C821,C uF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 2 EA C821,C uF 50V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 2 EA C821,C uF 50V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 10 EA C103,C106,C110,C205,C501, C502,C509,C604,C813,C uF 50V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 10 EA C103,C106,C110,C205,C501, C502,C509,C604,C813,C uF 50V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 10 EA C103,C106,C110,C205,C501, C502,C509,C604,C813,C uF 50V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 10 EA C103,C106,C110,C205,C501, C502,C509,C604,C813,C uF 50V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA C uF 16V K 1608 X7R /0.33uF 25V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 1 EA C uF 16V K 1608 X7R /0.33uF 25V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 1 EA C uF 16V K 1608 X7R /0.33uF 25V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 1 EA C uF 16V K 1608 X7R /0.33uF 25V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 8 EA C204,C207,C506,C513,C814, 0.47uF 16V K 1608 X7R C815,C819,C823 /0.47uF 25V K 1608 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 8 EA C204,C207,C506,C513,C814, 0.47uF 16V K 1608 X7R C815,C819,C823 /0.47uF 25V K 1608 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 8 EA C204,C207,C506,C513,C814, 0.47uF 16V K 1608 X7R C815,C819,C823 /0.47uF 25V K 1608 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 8 EA C204,C207,C506,C513,C814, 0.47uF 16V K 1608 X7R C815,C819,C823 /0.47uF 25V K 1608 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA C uF 25V K 2012 X7R CAPACITOR, CHIP MURATA 3.0 EAY LGIT SMT 1 EA C uF 25V K 2012 X7R CAPACITOR, CHIP SAMWHA 3.0 EAY LGIT SMT 1 EA C uF 25V K 2012 X7R CAPACITOR, CHIP TDK 3.0 EAY LGIT SMT 1 EA C uF 25V K 2012 X7R CAPACITOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA ZD601 BZT52C6V8S 6.8V SOD-323 DIODE, ZENER DIODES 3.0 EAY LGIT SMT 1 EA ZD601 MMSZ5235BS 6.8V SOD-323 DIODE, ZENER RECTRON 3.0 EAY LGIT SMT 1 EA ZD601 MM3Z6V8ST1G 6.8V SOD-323 DIODE, ZENER ONSEMI 3.0 EAY LGIT SMT 1 EA ZD601 KDZ6.8V 6.8V SOD-323 DIODE, ZENER KEC 3.0 EAY LGIT SMT 1 EA ZD602 BZT52C3V6 3.6V SOD-123 DIODE, ZENER DIODES 2013Y 3.0 EAY LGIT SMT 1 EA ZD602 SDZ3V6G 3.6V SOD-123 DIODE, ZENER AUK 2013Y 3.0 EAY LGIT SMT 1 EA ZD602 MMSZ5227B 3.6V SOD-123 DIODE, ZENER RECTRON 2013Y 3.0 EAY LGIT SMT 12 EA D103,D121,D504,D604,D605, D802,D803,D805,D806,D809, 1N4148W 100V 150mA SOD-123 DIODE RECTRON D810,D EAY LGIT SMT 12 EA D103,D121,D504,D604,D605, D802,D803,D805,D806,D809, 1N4148W 100V 150mA SOD-123 DIODE DIODES D810,D EAY LGIT SMT 12 EA D103,D121,D504,D604,D605, D802,D803,D805,D806,D809, MMSD4148T1 100V 200mA SOD-123 DIODE ONSEMI D810,D EAY LGIT SMT 12 EA D103,D121,D504,D604,D605, D802,D803,D805,D806,D809, SDS4148G 100V 150mA SOD-123 DIODE AUK D810,D EAY LGIT SMT 4 EA Q101,Q102,Q601,Q602 STD13NM60N 600V 11A D-PAK FET STM 3.0 EAY LGIT SMT 4 EA Q101,Q102,Q601,Q602 FCD380N60E 600V 10.2A D-PAK FET FAIRCHILD 2013Y 3.0 EAY LGIT SMT 4 EA Q101,Q102,Q601,Q602 TK10P60W 600V 9.8A D-PAK FET TOSHIBA 2013Y 3.0 EAY LGIT SMT 1 EA Q801 MDD7N25 250V 6.2A D-PAK FET MAGNACHIP 2013Y 3.0 EAY LGIT SMT 1 EA Q801 KF9N25D 250V 7.5A D-PAK FET KEC 2013Y 3.0 EAY LGIT SMT 1 EA Q801 TK8P25DA 250V 7.5A D-PAK FET THOSIBA 2013Y 3.0 EAY LGIT SMT 2 EA Q803,Q806 FDT86106LZ 100V 3.2A SOT-223 FET FAIRCHILD 3.0 EAY LGIT SMT 2 EA Q803,Q806 PF610BL 100V 0.9A SOT-223 FET NIKO-SEM 2013Y 3.0 EAY LGIT SMT 2 EA Q803,Q806 STN4NF20L 200V 1A SOT-223 FET STM 3.0 EAY LGIT SMT 2 EA Q803,Q806 MDHT4N20Y 200V 0.85A SOT-223 FET MAGNACHIP 3.0 EAY LGIT SMT 1 EA Q501 BCW66GLT SOT-23 NPN TRANSISTOR ONSEMI 3.0 EAY LGIT SMT 1 EA Q501 KTC3551T 80V 1A TSM NPN TRANSISTOR KEC 3.0 EAY LGIT SMT 1 EA Q501 2SC5865 SOT-23 NPN TRANSISTOR ROHM 3.0 EAY LGIT SMT 2 EA Q201,Q502 MMBT2222A 40V 600mA SOT-23 NPN TRANSISTOR ONSEMI 3.0 EAY LGIT SMT 2 EA Q201,Q502 KTN2222AS 40V 600mA SOT-23 NPN TRANSISTOR KEC 3.0 EAY LGIT SMT 2 EA Q201,Q502 SBT2222A 40V 600mA SOT-23 NPN TRANSISTOR AUK 3.0 EAY LGIT SMT 4 EA Q603,Q604,Q802,Q805 MMBT2907A -60V -600mA SOT-23 PNP TRANSISTOR ONSEMI 3.0 EAY LGIT SMT 4 EA Q603,Q604,Q802,Q805 KTN2907AS -60V -600mA SOT-23 PNP TRANSISTOR KEC 3.0 EAY LGIT SMT 4 EA Q603,Q604,Q802,Q805 SBT2907A -60V -600mA SOT-23 PNP TRANSISTOR AUK 3.0 EAY LGIT SMT 1 EA IC601 R2A20133D, SOIC-8 IC RENESAS 2013Y 3.0 EAY LGIT SMT 1 EA IC101 SSC9527S, SOIC-18 IC SANKEN 2013Y 3.0 EAY LGIT SMT 1 EA IC801 BD9483F, SOP-24 IC ROHM 2013Y 3.0 EAY LGIT SMT 1 EA IC202 SJ432BS 1.24V ±0.5% SOT-23 IC AUK 3.0 EAY LGIT SMT 1 EA IC202 TLV431BSN1T1G 1.24V±0.5% SOT-23 IC ON SEMI 3.0 EAY LGIT SMT 1 EA IC202 AZ431LANTR-E1 1.24V±0.5% SOT-23 IC BCD 3.0 EAY LGIT SMT 1 EA IC251 SNF431BS 2.5V ±0.5% SOT-23 IC AUK 3.0 EAY LGIT SMT 1 EA IC251 AS431ANTR-E1 2.5V ±0.5% SOT-23 IC BCD 3.0 EAY LGIT SMT 1 EA IC251 KIA431BM 2.5V ±0.5% SOT-23 IC KEC 28
29 3.0 EAY LGIT SMT 3 EA R207,R257,R861 0Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 3 EA R207,R257,R861 0Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 3 EA R207,R257,R861 0Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R841 10Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R841 10Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R841 10Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R102,R612 33Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R102,R612 33Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R102,R612 33Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R117 47Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R117 47Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R117 47Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 3 EA R210,R608,R Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 3 EA R210,R608,R Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 3 EA R210,R608,R Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R115,R Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R115,R Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R115,R Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 4 EA R108,R208,R209,R Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 4 EA R108,R208,R209,R Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 4 EA R108,R208,R209,R Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R Ω J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 14 EA R202,R504,R508,R805,R806, R808,R810,R823,R824,R826, 1KΩ J 1608 RESISTOR, CHIP KAMAYA R828,R837,R839,R EAY LGIT SMT 14 EA R202,R504,R508,R805,R806, R808,R810,R823,R824,R826, 1KΩ J 1608 RESISTOR, CHIP PILKOR R828,R837,R839,R EAY LGIT SMT 14 EA R202,R504,R508,R805,R806, R808,R810,R823,R824,R826, 1KΩ J 1608 RESISTOR, CHIP YAGEO R828,R837,R839,R EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R807,R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R807,R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R807,R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 10 EA R120,R123,R211,R220,R256, R507,R603,R606,R803,R821 10KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 10 EA R120,R123,R211,R220,R256, R507,R603,R606,R803,R821 10KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 10 EA R120,R123,R211,R220,R256, R507,R603,R606,R803,R821 10KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R860 30KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R860 30KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R860 30KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 3 EA R128,R842,R845 47KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 3 EA R128,R842,R845 47KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 3 EA R128,R842,R845 47KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R506 75KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R506 75KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R506 75KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 4 EA R509,R604,R809,R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 4 EA R509,R604,R809,R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 4 EA R509,R604,R809,R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 4 EA R843,R844,R858,R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 4 EA R843,R844,R858,R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 4 EA R843,R844,R858,R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ J 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R Ω F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R261 2KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R261 2KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R261 2KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R258,R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R258,R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R258,R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R846,R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R846,R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R846,R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R111,R260 10KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R111,R260 10KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R111,R260 10KΩ F 1608 RESISTOR, CHIP YAGEO 29
30 3.0 EAY LGIT SMT 1 EA R618 24KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R618 24KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R618 24KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R848 27KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R848 27KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R848 27KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R617 30KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R617 30KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R617 30KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R262 47KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R262 47KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R262 47KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R854,R863 62KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R854,R863 62KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R854,R863 62KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R849 75KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R849 75KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R849 75KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 3 EA R850,R851,R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 3 EA R850,R851,R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 3 EA R850,R851,R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 1 EA R KΩ F 1608 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 4 EA R812,R814,R834,R Ω F 2012 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 4 EA R812,R814,R834,R Ω F 2012 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 4 EA R812,R814,R834,R Ω F 2012 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 12 EA R811,R813,R815,R816,R817, R818,R829,R830,R831,R832, 4.7Ω F 2012 RESISTOR, CHIP KAMAYA R833,R EAY LGIT SMT 12 EA R811,R813,R815,R816,R817, R818,R829,R830,R831,R832, 4.7Ω F 2012 RESISTOR, CHIP PILKOR R833,R EAY LGIT SMT 12 EA R811,R813,R815,R816,R817, R818,R829,R830,R831,R832, 4.7Ω F 2012 RESISTOR, CHIP YAGEO R833,R EAY LGIT SMT 2 EA J29,J46 0Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA J29,J46 0Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA J29,J46 0Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R802,R Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R802,R Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R802,R Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R119,R122 10Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R119,R122 10Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R119,R122 10Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R610,R611 18Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R610,R611 18Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R610,R611 18Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R801,R819 47Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R801,R819 47Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R801,R819 47Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R118,R Ω J 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R118,R Ω J 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R118,R Ω J 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 2 EA R852,R862 75KΩ F 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 2 EA R852,R862 75KΩ F 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 2 EA R852,R862 75KΩ F 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 10 EA R103,R104,R105,R106,R127, R613,R614,R615,R616,R KΩ F 3216 RESISTOR, CHIP KAMAYA 3.0 EAY LGIT SMT 10 EA R103,R104,R105,R106,R127, R613,R614,R615,R616,R KΩ F 3216 RESISTOR, CHIP PILKOR 3.0 EAY LGIT SMT 10 EA R103,R104,R105,R106,R127, R613,R614,R615,R616,R KΩ F 3216 RESISTOR, CHIP YAGEO 3.0 EAY LGIT SMT 0.5 GR HT-130A-106 BOND HITECH KOREA 3.0 EAY LGIT SMT 0.5 GR HT-130D-7 BOND HITECH KOREA 3.0 EAY LGIT SMT 0.5 GR TB-2217H BOND Three Bond 3.0 EAY LGIT AI LGP55-13PL2 AI COMPONENTS AI ASS'Y 3.0 EAY LGIT AI 2 EA CY101,CY102 CT81 100pF 250V K P10,Y1 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 2 EA CY101,CY102 SD 100pF 250V K P10,Y1 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 2 EA CY103,CY104 CT81 220pF 250V K P10,Y1 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 2 EA CY103,CY104 SD 220pF 250V K P10,Y1 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 1 EA CY110 CT pF 250V M P10, Y1 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 1 EA CY110 SD 1000pF 250V M P10, Y1 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 1 EA C115 NXB 2.2uF 50V M P5 Φ5X11 CAPACITOR, ALUMINUM SAMYOUNG 2013Y 3.0 EAY LGIT AI 2 EA C508,C512 NXB 10uF 50V M P5 Φ5X11 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 2 EA C508,C512 SG 10uF 50V M P5 Φ5X11 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 2 EA C505,C511 NXB 47uF 50V M P5 Φ6.3X11 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 2 EA C505,C511 SG 47uF 50V M P5 Φ6.3X11 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 1 EA C201 NXB 1500uF 10V M P5 Φ10X20 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 1 EA C201 SG 1500uF 10V M P5 Φ10X20 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 1 EA C202 NXB 470uF 10V M P5 Φ8X11.5 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 1 EA C202 SG 470uF 10V M P5 Φ8X12 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 2 EA C251,C252 NXH 330uF 35V M P5 Φ10X12.5 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 2 EA C251,C252 MG 330uF 35V M P5 Φ10X13 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 2 EA C255,C256 NXH 470uF 25V M P5 Φ10X12.5 CAPACITOR, ALUMINUM SAMYOUNG 3.0 EAY LGIT AI 2 EA C255,C256 MG 470uF 25V M P5 Φ10X13 CAPACITOR, ALUMINUM SUSCON 3.0 EAY LGIT AI 2 EA C257,C258 NFK 47uF 160V M P5 Φ 12.5X20 CAPACITOR, ALUMINUM SAMYOUNG 2013Y 3.0 EAY LGIT AI 4 EA C801,C802,C805,C806 NFK 22uF 250V M P5 Φ 10X16 CAPACITOR, ALUMINUM SAMYOUNG 2013Y 3.0 EAY LGIT AI 1 EA C118 CT81 100pF 1KV K P5 125 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 1 EA C118 EK R 3A100pF 1KV K P5 125 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 2 EA C113,C614 CT81 220pF 1KV K P5 125 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 2 EA C113,C614 EK R 3A 220pF 1KV K P5 125 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 2 EA C503,C510 CT pF 1KV K P5 125 CAPACITOR, CERAMIC YINANDON 3.0 EAY LGIT AI 2 EA C503,C510 EK R 3A1000pF 1KV K P5 125 CAPACITOR, CERAMIC SAMWHA 3.0 EAY LGIT AI 5 EA D101,D105,D501,D502,D503 HER108G 1KV 1A DO-41 DIODE RECTRON 3.0 EAY LGIT AI 5 EA D101,D105,D501,D502,D503 UF4007 1KV 1A DO-41 DIODE TSC 3.0 EAY LGIT AI 5 EA D101,D105,D501,D502,D503 UF4007 1KV 1A DO-41 DIODE DACHANG 3.0 EAY LGIT AI 5 EA D101,D105,D501,D502,D503 UF1007 1KV 1A DO-41 DIODE DIODES 30
31 3.0 EAY LGIT AI 2 EA D801,D807 HER204G 300V 2A DO-41 DIODE TSC 2013Y 3.0 EAY LGIT AI 2 EA D801,D807 HER204G 300V 2A DO-41 DIODE DACHANG 2013Y 3.0 EAY LGIT AI 2 EA D801,D807 UG V 2A DO-15 DIODE LITEON 2013Y 3.0 EAY LGIT AI 1 EA ZD504 1N5235B 6.8V DO-35 DIODE, ZENER VISHAY 3.0 EAY LGIT AI 1 EA ZD504 1N5235B 6.8V DO-35 DIODE, ZENER RECTRON 3.0 EAY LGIT AI 1 EA ZD102 1N5239B 9.1V DO-35 DIODE, ZENER VISHAY 3.0 EAY LGIT AI 1 EA ZD102 1N5239B 9.1V DO-35 DIODE, ZENER RECTRON 3.0 EAY LGIT AI 1 EA ZD502 1N5245B 15V DO-35 DIODE, ZENER VISHAY 3.0 EAY LGIT AI 1 EA ZD502 1N5245B 15V DO-35 DIODE, ZENER RECTRON 3.0 EAY LGIT AI 1 EA ZD503 1N5250B 20V DO-35 DIODE, ZENER VISHAY 3.0 EAY LGIT AI 1 EA ZD503 1N5250B 20V DO-35 DIODE, ZENER RECTRON 3.0 EAY LGIT AI 33 EA EL3,EL4,EL5,EL6,EL7,EL8, EL13,EL14,EL21,EL22,EL27, EL28,EL29,EL30,EL31,EL32, EL33,EL34,EL39,EL40,EL41, EL42,EL43,EL44,EL45,EL46, EL47,EL48,EL51,EL57,EL58, EL64,EL66 1.6X3.0 EYELET LEZHI 3.0 EAY LGIT AI 29 EA EL1,EL2,EL9,EL10,EL11,EL12, EL15,EL16,EL17,EL18,EL19, EL20,EL23,EL24,EL25,EL26, EL35,EL36,EL37,EL38,EL49, 2.0X3.0 EYELET LEZHI EL50,EL56,EL59,EL60,EL69, EL70,EL71,EL EAY LGIT AI 1 EA EL63 GRIPPER DIA 1.6*2.6L GRIPPER LEZHI 3.0 EAY LGIT AI 1 EA LB601 BFS3550A0L SINGLE AXIAL INDUCTOR, BEAD FILTER LEAD SAMWHA 3.0 EAY LGIT AI 5 EA LB105,LB106,LB201,LB801, LB EAY LGIT AI 8 EA P601,P602,P603,P604,P605, P606,P607,P608 J2,J3,J5,J6,J10,J11,J12,J13, J14,J18,J19,J20,J21,J23,J24, 3.0 EAY LGIT AI 37 EA J25,J27,J30,J31,J32,J33,J34, J35,J36,J38,J39,J41,J42,J43, J44,J45,J47,J48,J49,J50,J51, J53 J2,J3,J5,J6,J10,J11,J12,J13, J14,J18,J19,J20,J21,J23,J24, 3.0 EAY LGIT AI 37 EA J25,J27,J30,J31,J32,J33,J34, J35,J36,J38,J39,J41,J42,J43, J44,J45,J47,J48,J49,J50,J51, J53 J2,J3,J5,J6,J10,J11,J12,J13, J14,J18,J19,J20,J21,J23,J24, 3.0 EAY LGIT AI 37 EA J25,J27,J30,J31,J32,J33,J34, J35,J36,J38,J39,J41,J42,J43, J44,J45,J47,J48,J49,J50,J51, J53 J2,J3,J5,J6,J10,J11,J12,J13, J14,J18,J19,J20,J21,J23,J24, 3.0 EAY LGIT AI 37 EA J25,J27,J30,J31,J32,J33,J34, J35,J36,J38,J39,J41,J42,J43, J44,J45,J47,J48,J49,J50,J51, J53 BFS3550R2F SINGLE RADIAL 3.0 EAY LGIT AI 1 EA R505 CRS 1Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R505 RDM94 1Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R505 SFR25 1Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R503 CRS 20Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R503 RDM94 20Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R503 SFR25 20Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R502 CRS 100Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R502 RDM94 100Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R502 SFR25 100Ω 1/4W J SMALL 3.0 EAY LGIT AI 1 EA R501 MORS 62KΩ 1W J SMALL 3.0 EAY LGIT AI 1 EA R501 RSD01 62KΩ 1W J SMALL 3.0 EAY LGIT AI 1 EA R501 PR01 62KΩ 1W J SMALL 3.0 EAY LGIT AI 1 EA R253 MORS 1.5KΩ 2W J SMALL 3.0 EAY LGIT AI 1 EA R253 RSD02 1.5KΩ 2W J SMALL 3.0 EAY LGIT AI 1 EA R253 PR02 1.5KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R251,R252 MORS 2.2KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R251,R252 RSD02 2.2KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R251,R252 PR02 2.2KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R263,R264 MORS 30KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R263,R264 RSD02 30KΩ 2W J SMALL 3.0 EAY LGIT AI 2 EA R263,R264 PR02 30KΩ 2W J SMALL 3.0 EAY LGIT AI 1 EA R124 PRC 1MΩ 1/2W J SURGE 3.0 EAY LGIT AI 1 EA R124 MSR37 1MΩ 1/2W J SURGE 3.0 EAY LGIT AI 1 EA R100 MSR37 1.2MΩ 1/2W J SURGE 3.0 EAY LGIT AI 1 EA R100 PRC 1.2MΩ 1/2W J SURGE INDUCTOR, BEAD FILTER LEAD SAMWHA SSJS (6mm Under) GT PIN LEZHI Φ0.6 JUMPER WIRE TPI Φ0.6 JUMPER WIRE ILKWANG Φ0.6 JUMPER WIRE Seungw on Φ0.6 JUMPER WIRE LEAN TECH RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, CARBON FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, METAL OXIDE FILM RESISTOR, FIXED CARBON COMPOSITION RESISTOR, FIXED CARBON COMPOSITION RESISTOR, FIXED CARBON COMPOSITION RESISTOR, FIXED CARBON COMPOSITION ABCO SMART PILKOR ABCO SMART PILKOR ABCO SMART PILKOR ABCO SMART PILKOR ABCO SMART PILKOR ABCO SMART PILKOR ABCO SMART PILKOR SMART PILKOR PILKOR SMART 31
32 3.0 EAY LGIT AI 2 EA R510,R511 WNPS 0.82Ω 1W J SMALL RESISTOR,WIRE WOUND ABCO 3.0 EAY LGIT AI 2 EA R510,R511 PRN 0.82Ω 1W J SMALL RESISTOR,WIRE WOUND SMART 3.0 EAY LGIT AI 1 EA R822 WNPS 0.12Ω 2W J SMALL RESISTOR,WIRE WOUND ABCO 3.0 EAY LGIT AI 1 EA R822 PRN 0.12Ω 2W J SMALL RESISTOR,WIRE WOUND SMART 3.0 EAY LGIT AI 3 EA R601,R602,R804 WNPS 0.16Ω 2W J SMALL RESISTOR,WIRE WOUND ABCO 3.0 EAY LGIT AI 3 EA R601,R602,R804 PRN 0.16Ω 2W J SMALL RESISTOR,WIRE WOUND SMART 3.0 EAY LGIT AI 1 EA PCB LGP55-13PL2 (159X240X1.6T) FR-1 KB,DS,L, 1oz CTI-600 PCB SHANGHAI WANZHENG 3.0 EAY LGIT AI 1 EA PCB LGP55-13PL2 (159X240X1.6T) FR-1 KB,DS,L, 1oz CTI-600 PCB SHANGHAI WANZHENG(WYT) 3.0 EAY LGIT AI 1 EA PCB LGP55-13PL2 (159X240X1.6T) FR-1 KB,DS,L, 1oz CTI-600 PCB CHENG HO 3.0 EAY LGIT ETC SUBSIDIARY MATERIALS 3.0 EAY LGIT ETC 1 EA BARCODE LABEL (40*8) BAR CODE SERVEONE 3.0 EAY LGIT ETC 1 EA BARCODE LABEL (40*8) BAR CODE Hansung Color 3.0 EAY LGIT ETC 3 GR H-828W BOND (RTV) ONG 3.0 EAY LGIT ETC 3 GR EA-4100 BOND (RTV) DOW CORNING 3.0 EAY LGIT ETC 3 GR SR-9000 BOND (RTV) DAEHEUNG CHEMICAL 3.0 EAY LGIT ETC 0.05 EA 506 X 344 X 190 8t BOX CARTON TAILI PACKING 3.0 EAY LGIT ETC 0.05 EA 506 X 344 X 190 8t BOX CARTON HUAXING PACK 3.0 EAY LGIT ETC 0.05 EA 506 X 344 X 190 8t BOX CARTON Haier Fungchoi 3.0 EAY LGIT ETC 0.10 EA 506 X 341 8t BOX PAD TAILI PACKING 3.0 EAY LGIT ETC 0.10 EA 506 X 341 8t BOX PAD HUAXING PACK 3.0 EAY LGIT ETC 0.10 EA 506 X 341 8t BOX PAD Haier Fungchoi 3.0 EAY LGIT ETC 0.55 EA 341 X 166 8t BOX PARTITION TAILI PACKING 3.0 EAY LGIT ETC 0.55 EA 341 X 166 8t BOX PARTITION HUAXING PACK 3.0 EAY LGIT ETC 0.55 EA 341 X 166 8t BOX PARTITION Haier Fungchoi 3.0 EAY LGIT ETC 0.20 EA 506 X 166 8t BOX PARTITION TAILI PACKING 3.0 EAY LGIT ETC 0.20 EA 506 X 166 8t BOX PARTITION HUAXING PACK 3.0 EAY LGIT ETC 0.20 EA 506 X 166 8t BOX PARTITION Haier Fungchoi 3.0 EAY LGIT ETC 1.00 EA 350 X 180 BUBBLE SHEET SERVEONE 3.0 EAY LGIT ETC 1.00 EA 350 X 180 BUBBLE SHEET KELIN 3.0 EAY LGIT ETC 25 GR EF-9301(g) FLUX ALPHA 3.0 EAY LGIT ETC 25 GR ILF-714(kg) FLUX ION ELEC 3.0 EAY LGIT ETC 25 GR DF-234U FLUX DOOSUNG 3.0 EAY LGIT ETC 25 GR ILF-710 FLUX ION ELEC 3.0 EAY LGIT ETC 15 GR HSE-11 B20 BAR (SN:99%,AG:0.3%,CU:0.7%) SOLDER BAR HEESUNG METAL 3.0 EAY LGIT ETC 15 GR SN CU NI P (HSE16(P)-B20 ) SOLDER BAR HEESUNG METAL 3.0 EAY LGIT ETC 15 GR SN:99%, AG:0.3%, CU:0.7% BAR SOLDER BAR Alpha Metal 3.0 EAY LGIT ETC 5 GR HSE-11 B20 BAR (SN:99%,AG:0.3%,CU:0.7%) SOLDER WIRE HEESUNG METAL 3.0 EAY LGIT ETC 5 GR SN CU NI P (HSE16(P)-B20 ) SOLDER WIRE HEESUNG METAL 3.0 EAY LGIT ETC 5 GR SN:99%, AG:0.3%, CU:0.7% w ire SOLDER WIRE Alpha Metal 32
33 Process Marking 33
34 공정표시 MARK (PCB SILK) Min. 3mm D M H I F A P T S Q R RT D : 자삽 M : SMD H : 수삽최종 I : ICT F : 1 차성능 A : AGING P : HI-POT T : 최종검사 (ATE) S : SET 검사 Q : QC 검사 R : 불량수리 RT : 양산보증시험 Min. 3mm 34
35 PCB Layout 35
36 Top Silk 36
37 Bottom Silk 37
38 Bottom Pattern 38
39 Bottom Solder mask 39
40 Safety Parts 40
41 41
42 42
43 Mechanical Drawing 43
44 44
45 45
46 Packing Drawing 46
47 0 1LGP55-13PL2 LED TV Power specification Rev
48 48
49 FRAGILE 0FRAGILE 1 49
50 50
51 51
52 Bar-Code Label Drawing 52
53 1. BARCODE Specification 1.1 Power Board Barcode specification 40 mm min 2~3mm 34mm min 2~3mm 8 mm LDO1A (3.0) 5mm min LDO1A (3.0) Label Form Bar Code Size 는그림의 size 가최소 size 이며, 업체기준및 PCB 공간에따라변경할수있으나, 그림의 size 보다줄일수는없음. Code Barcode Specification Remark Manufacturing code L (L : LGIT) Manufacturing Year D (D : 2013) Manufacturing Month O (1,2,3, 10:O, 11:N, 12:D) Manufacturing Date 1 (1~9, A:10, B:11, C:12, X) * Don t USE : I, O Character Manufacturing Line A~D : Gwangju, E~N / 0~9 : Yantai, O~V : Indonesia, X~Z : Poland LG Part No (EAY ) Serial. No (10Digit, 0001~9999) Rev. No Approval Sheet Revision Number Barcode type : 93 code Barcode length : 17 digit Label size : 8 X 36 mm (minimize) BARCODE PRINTING : DO NOT ERASE, WHEN RUB BY HAND. Label P/N : 3320KE0008B Ribbon Black R300 P/N : 5250KR0011A 53
54 Labeling Point 54
55 LABELING POINT 55
56 Workmanship Point 56
57 Silicone Bonding Point ( ) C610 & PCB Component Bottom Side Bottom Diode (D603) 57
Microsoft PowerPoint - 4M승인원_LGIT_LGP32-13PL2(EAY62830901)_REV2.2
Scanning LIB. Safety SPECIFICATION FOR APPROVAL RoHS CUSTOMER ITEM : LG Electronics inc. : Power Supply Unit. P/NO Model Name Customer Supplier LGP32-13PL2 EAY62830901 PLDC-L231A DATE Revision : 2013.
CD-6208_SM(new)
Digital Amplifier MA-110 CONTENTS Specifications... 1 Electrical parts list... 2 top and bottom view of p.c. board... 10 Application... 12 block Diagram... 13 Schematic Diagram... 14 Exploded view of cabinet
CD-6208_SM(new)
Public Address Power Amplifier PA-63 CONTENTS Specifications... Electrical parts list... top and bottom view of p.c. board... 8 Application... 0 block Diagram... Schematic Diagram... Exploded view of cabinet
DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They
DC Link Capacitor DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They are Metallized polypropylene (SH-type)
PD-659_SM(new)
Power Distributor PD-659 CONTENTS Specifications... 1 Electrical Parts List... 2 Top and Bottom View of P.C. Board... 5 Wiring Diagram... 7 Block Diagram... 8 Schematic Diagram... 9 Exploded View of Cabinet
Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket
Vertical Probe Card for Wafer Test Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Life Time: 500000
M A J E S T I C S E R I E S AMPLIFIER M-500/700/1000 ELECTRICAL PARTS LIST (M-500/700/1000) Ref No. Part No. Description Value Qty M500 AMP B'D(4005187700) CR102 CR115-116 3509101231-A CAP CE B 100PF
PA-2100_2200DC.xls
P U B L I C A D D R E S AMPLIFIER PA-2100DC/2200DC R315 R325 3009822973 RES CF 8.2K 1/5W J N 8.2K 2 R322 3009823973 RES CF 10K 1/5W J N 82K 1 R332-333 R341 R344 3009103973 RES CF 10K 1/5W J N 10K 4 SSW301-308
ELECTRICAL PARTS LIST (CA-6215) Ref No. Part No. Description Value Qty AMP B'D ( B ) C1406 C CAP NPP POLY 152J 2J 152P 2 C140
2 C H P O W E R E D MIXER CA-6215 ELECTRICAL PARTS LIST (CA-6215) Ref No. Part No. Description Value Qty AMP B'D ( 4003487400B ) C1406 C1506 3698152198 CAP NPP POLY 152J 2J 152P 2 C1408 C1508 3678050177
Coriolis.hwp
MCM Series 주요특징 MaxiFlo TM (맥시플로) 코리올리스 (Coriolis) 질량유량계 MCM 시리즈는 최고의 정밀도를 자랑하며 슬러리를 포함한 액체, 혼합 액체등의 질량 유량, 밀도, 온도, 보정된 부피 유량을 측정할 수 있는 질량 유량계 이다. 단일 액체 또는 2가지 혼합액체를 측정할 수 있으며, 강한 노이즈 에도 견디는 면역성, 높은 정밀도,
歯동작원리.PDF
UPS System 1 UPS UPS, Converter,,, Maintenance Bypass Switch 5 DC Converter DC, DC, Rectifier / Charger Converter DC, /, Filter Trouble, Maintenance Bypass Switch UPS Trouble, 2 UPS 1) UPS UPS 100W KVA
PowerPoint 프레젠테이션
Scanning LIB. Safety SPECIFICATION FOR APPROVAL RoHS CUSTOMER ITEM : LG Electronics inc. : Power Supply Unit. P/NO Model Name Customer Supplier LGP32F-12P EAY62770401 LGP32F-12P DATE : 2012. 01. 05 Revision
untitled
Huvitz Digital Microscope HDS-5800 Dimensions unit : mm Huvitz Digital Microscope HDS-5800 HDS-MC HDS-SS50 HDS-TS50 SUPERIORITY Smart Optical Solutions for You! Huvitz Digital Microscope HDS-5800 Contents
5. Kapitel URE neu
URE Fuses for Semiconductor Protection European-British Standard Standards: IEC 60 269-4 BS 88-4 Class: ar Voltage ratings: AC 240 V AC 700 V Current ratings: 5 A 900 A Features / Benefits High interrupting
(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection)
SERVICE MANUAL (Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) 12 (Storage Bins) 12 (Ice Machine)
Microsoft Word - SRA-Series Manual.doc
사 용 설 명 서 SRA Series Professional Power Amplifier MODEL No : SRA-500, SRA-900, SRA-1300 차 례 차 례 ---------------------------------------------------------------------- 2 안전지침 / 주의사항 -----------------------------------------------------------
비어 있음
VYPYR. VYPYR 15 VYPYR 120,. 43 Peavey. VYPYR., " ". TransTube " ", 266MHz SHARC. VYPYR 5,.,,. VYPYR. AC. IEC ( )... : 24 "( 30cm). 0 - Input. 1 - Stompbox Encoder VYPYR15.. 11.!. 2 - Amp Encoder.. 2. LED
<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770>
양성자가속기연구센터 양성자가속기 개발 및 운영현황 DOI: 10.3938/PhiT.25.001 권혁중 김한성 Development and Operational Status of the Proton Linear Accelerator at the KOMAC Hyeok-Jung KWON and Han-Sung KIM A 100-MeV proton linear accelerator
- 2 -
- 1 - - 2 - 전기자동차충전기기술기준 ( 안 ) - 3 - 1 3 1-1 3 1-2 (AC) 26 1-3 (DC) 31 2 37 3 40-4 - 1 14, 10,, 2 3. 1-1 1. (scope) 600 V (IEC 60038) 500 V. (EV : Electric Vehicle) (PHEV : Plug-in Hybrid EV).. 2. (normative
Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드]
![Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드]](/thumbs/101/150466693.jpg "Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드]")
전자회로 Ch3 iode Models and Circuits 김영석 충북대학교전자정보대학 2012.3.1 Email: kimys@cbu.ac.kr k Ch3-1 Ch3 iode Models and Circuits 3.1 Ideal iode 3.2 PN Junction as a iode 3.4 Large Signal and Small-Signal Operation
Preliminary spec(K93,K62_Chip_081118).xls
2.4GHz Antenna K93- Series KMA93A2450X-M01 Antenna mulilayer Preliminary Spec. Features LTCC Based designs Monolithic SMD with small, low-profile and light-weight type Wide bandwidth Size : 9 x 3 x 1.0mm
(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i
SERVICE MANUAL N200M / N300M / N500M ( : R22) e-mail : jhyun00@koreacom homepage : http://wwwicematiccokr (specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements)
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS
[Caution] Attention to red sentence 3-1. Disassembly and Reassembly R520/ 1 2 1 1. As shown in picture, adhere Knob to the end closely into the arrow direction(1), then push the battery up (2). 2. Picture
REVERSIBLE MOTOR 표지.gul
REVERSIBLE MOTOR NEW H-SERIES REVERSIBLE MOTOR H-EX Series LEAD WIRE w RH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : Min.) MOTOR OUTPUT VOLTAGE (V) FREQUENCY (Hz) INPUT CURRENT (ma) RATING SPEED (rpm) STARTING
歯AG-MX70P한글매뉴얼.PDF
120 V AC, 50/60 Hz : 52 W (with no optional accessories installed), indicates safety information. 70 W (with all optional accessories installed) : : (WxHxD) : : 41 F to 104 F (+ 5 C to + 40 C) Less than
( Full Automatic Printer ) 작용업종 : Tube Light ( 형광등 1.2m / 2.4m) 가로등조명. 인테리어산업용조명 Loader 1.2m Stencil Solder LED LD812V Reflow 8 to 10 Hot Air Convecti
Autotronik-SMT GmbH LED Assembly 위한장비구성도 Printer LED Pick & Place Reflow V-Cutting Model 1 1.2m Tube LED " 양산 " 장비 Full Vision Auto Printer 1.2m LED Pick & Place LED Reflow 10 Zone LED Multi V-Cutting
전기정보 11월(내지).qxp
463-835 경기도 성남시 분당구 야탑로 338(야탑동 191) T.(031) 724-6100(代) 등록일자 1976년 3월 18일 등록번호 서울 라 11267 www.kemc.co.kr 11 2014 통권474 Power Tech AC 직결형 LED 구동회로 설계 스마트 리뉴어블(Smart Renewable) EMS 운영 결과 분석 발전기 온라인 통합 감시진단
2
2 3 4 5 6 7 8 9 10 11 60.27(2.37) 490.50(19.31) 256.00 (10.07) 165.00 111.38 (4.38) 9.00 (0.35) 688.00(27.08) 753.00(29.64) 51.94 (2.04) CONSOLE 24CH 32CH 40CH 48CH OVERALL WIDTH mm (inches) 1271.45(50.1)
동아내지1수(A~E)-수정2
DFT-10A-10P FILE NO. Body : Polycarbonate Contact : Brass, Nickel Plated Cover : PS resin Current Rating : 10A Voltage Rating With standing Voltage : AC 2500V one minute Insulation Resistance : 100M over
INDUCTION MOTOR 표지.gul
INDUCTION MOTOR NEW HSERIES INDUCTION MOTOR HEX Series LEAD WIRE TYPE w IH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : CONTINUOUS) MOTOR TYPE IHPF10 IHPF11 IHPF IHPF22 IHPFN1U IHPFN2C OUTPUT 4 VOLTAGE
EP-B-P407 [변환됨].eps
![EP-B-P407 [변환됨].eps](/thumbs/91/105033420.jpg "EP-B-P407 [변환됨].eps")
IZD10/IZE11 Series 20kV50mm 0.4kV25mm 1 5V( 100Ω). IZD10 Series 2(1 5V, 4 20mA) 0.001kV(±0.4kV ), 0.1kV(±20kV ) ±0.5 F.S. ±1digit (1mm ) 2 (±0.4kV, ±20kV) IZE11 Series Alphabet Index 695 IZD10 Series IZD10
歯칩저항자료(안내용)
(Chip Resistor) HISTORY - - Fixed Thick Film Resistor - System ,,. ( ) RuO2 Supptering NiCr Carbon,,,,TCR HIGH POWER, TCR, Volumn chip - (ohm's law) - - 1 R = 1 1 = 1 + R1 R2 R = R1 + R2 = 2 + 3 = 5 I
00.1
HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Partly threaded, galvanized or yellow chromatized dk k L d m Head Ø dk
<4D F736F F F696E74202D20454D49A3AF454D43BAEDB7CEBCC52EBBEABEF7BFEBC6F7C7D428BBEFC8ADC0FCC0DA >
Materials Material Grades : PL Series Applicaton : Power transformer and Inductor Grades μi Freq. (MHz) Pcv 1) (Kw/ m3 ) Bs 2) (mt) Materials Characteristics PL-7 2,400 ~ 0.2 410 390 Mn-Zn Low loss PL-9
歯국문-Heatran소개자료1111.PDF
Heat Transfer Technology Heat Transfer Technology HEATRAN Heat Transfer Technology 1. 회사개요 Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer
,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law),
1, 2, 3, 4, 5, 6 7 8 PSpice EWB,, ,,,,,, (41) ( e f f e c t ), ( c u r r e n t ) ( p o t e n t i a l difference),, ( r e s i s t a n c e ) 2,,,,,,,, (41), (42) (42) ( 41) (Ohm s law), ( ),,,, (43) 94 (44)
6. Separate HDD by pulling in the arrow direction. * Cautions Avoid lifting HDD excessively, because Connector can be damaged ODD Remove
3-1. Disassembly and Reassembly R510 [Caution] Attention to red sentence. 2 2 1. Before disassembling, the AC adaptor and Battery must be separated. 2. AS mark No.1/2 put KNOB-Battery to end of each side,
Ceramic Innovation `
Ceramic Innovation www.lattron.com 1. 2. -NTC thermistor -Piezoelectric Ceramic - RF Components 3. 1-1. 1. : Lattron Co., Ltd (Latticed + Electron) 2. : / 3. : 1998.01.20 4. 1688-24 : 306-230 82-42-935-8432
M3005 I0002 B0001 T0001 M0001 G0003 G0011 SYSTEM I0009 W3007 R0006 W3003 I0005 www MK-Electronic de B0701 C0013 B 5-1
M3005 I0002 B0001 T0001 M0001 G0003 G0011 SYSTEM I0009 W3007 R0006 W3003 I0005 B0701 C0013 B 5-1 ASS'Y - LCD K3001 K4001 I0003 K0001 K1001 K2001 K2002 K4002 K3002 I0013 T4000 K0002 K0100 5-2 Unit-Top T0302
서보교육자료배포용.ppt
1. 2. 3. 4. 1. ; + - & (22kW ) 1. ; 1975 1980 1985 1990 1995 2000 DC AC (Ferrite) (NdFeB; ) /, Hybrid Power Thyrister TR IGBT IPM Analog Digital 16 bit 32 bit DSP RISC Dip SMD(Surface Mount Device) P,
This Document can not be used ithout Samsung's authorization 5. 기구전개도 ASSY-LCD 5-2
This Document can not be used ithout Samsung's authorization 5. 기구 전개도 SYSTEM de I0006 W3007 M3004 M3005 T0103 T3003 W3020 I0001 ec t I0002 ro ni c T0001 G0011 M4000 K- El T0010 I0009 M0001 W3101 B0001
CONTENTS 1. Approval Revision Record Scope Numbering of product Product Part No Lot. No Absolu
WISOL / SFM11R2D P/N: DATA SHEET Rev.01 WISOL 531-7, Gajang-ro,Osan-si,Gyeonggi-do Rep. of Korea http://www.wisol.co.kr CONTENTS 1. Approval Revision Record... 3 2. Scope... 4 3. Numbering of product...
사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서 제품을 사용하지 마십시오. 3.이 제품은
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 사용자설명서 TourBus 0 & TourBus 5 사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서
ITVX-A-C1
5.0MPa New RoHS 5.0 5.0MPa 5.0MPa 0.01 3.0 0.01 3.0MPa 3000 3000L/min ANR 5.0MPa3.0MPa Ar N2 N2O2ArO2 O2 P.2. 3W ITVX Series CAT.KS60-21A 5.0MPa ITVX2000 Series RoHS ITVX2 030 0 1 3 S 2 ITVX2000 0 ) )
Microsoft Word - Installation and User Manual_CMD V2.2_.doc
CARDMATIC CMD INSTALLATION MANUAL 씨앤에이씨스템(C&A SYSTEM Co., Ltd.) 본사 : 서울특별시 용산구 신계동 24-1(금양빌딩 2층) TEL. (02)718-2386( 代 ) FAX. (02) 701-2966 공장/연구소 : 경기도 고양시 일산동구 백석동 1141-2 유니테크빌 324호 TEL. (031)907-1386
Microsoft Word - Shield form gasket.doc
Shield Form Gasket (P/N: UKB10-LS10-190-5, UKB6-LN6-200-5, UKU13-3-150-8, URB10-R5-200-D, URB5-1.5-200-4, URB8-4-180-4, URB9-1-200-D, URU10-3-150-8) 1 Shield form gasket ( 주 ) 뉴티씨 ( NewTC ) 1-1 Description
1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard curr
Non-Contact Infrared Temperature I R - Compact Sensor / Transmitter GASDNA co.,ltd C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX: +82-32-623-7510
歯03-ICFamily.PDF
Integrated Circuits SSI(Small Scale IC) 10 / ( ) MSI(Medium Scale IC) / (, ) LSI(Large Scale IC) / (LU) VLSI(Very Large Scale IC) - / (CPU, Memory) ULSI(Ultra Large Scale IC) - / ( ) GSI(Giant Large Scale
5-1 Cabinet Assembly W00 W48 W009 H00 P00 W48 M0 C05 P00 P00 W7 W44 W00 P05 A00 W009 C00 P007P P007F 5- This Document can not be used without Samsung
5. Exploded View and Parts List 5-1 Cabinet Assembly------------------------------------------------------------------------------- 5-2 5-2 Electrical Parts List-----------------------------------------------------------------------------
ez-shv manual
ez-shv+ SDI to HDMI Converter with Display and Scaler Operation manual REVISION NUMBER: 1.0.0 DISTRIBUTION DATE: NOVEMBER. 2018 저작권 알림 Copyright 2006~2018 LUMANTEK Co., Ltd. All Rights Reserved 루먼텍 사에서
www.ezled.co.kr EZ COB LIGHTING 2015 SUNIL ELECOMM NEW COB 01 COB (Chip-on-Board) LED란? COB (CHIP ON BOARD) 한 개의 Module에 여러 개의 LED Chip을 Packaging한 것으로 여러 개의 부품을 하나의 기판 위에 일체화함으로써 발광부가 집약적으로 설계되어 고출력의
SURGE PROTECTIVE DEVICE 전원 전원 전원 +E +E +N+E
전원 전원 전원 +E +E +N+E Use of spd +E 변전소 (Substation) (Application) 배전반주분전반 (Distributing board) 분전반 (Cabinet panel board) 설비 (Facilities) 중부하기기 (Heavy loading machine) 경부하기기 (ight loading machine) 106 권장
TAE YOUNG Electronics 당사는 1987년 설립되어 직류전원장치를 전문 제조하는 업체로서, 국내 인터넷서비스 업체인 두루넷과 하나로텔레콤 등을 거쳐 현재의 SK브로드밴드, LG유플러스의 전원아답터 공급업체로서 오랜 시간 함께 성장하였습니다. 또한 자체 브
www.adaptor21.com Global Power Supply Leader TAE YOUNG AC. ADAPTOR. SMPS TAE YOUNG Electronics 당사는 1987년 설립되어 직류전원장치를 전문 제조하는 업체로서, 국내 인터넷서비스 업체인 두루넷과 하나로텔레콤 등을 거쳐 현재의 SK브로드밴드, LG유플러스의 전원아답터 공급업체로서 오랜
untitled
CLEBO PM-10S / PM-10HT Megapixel Speed Dome Camera 2/39 3/39 4/39 5/39 6/39 7/39 8/39 ON ON 1 2 3 4 5 6 7 8 9/39 ON ON 1 2 3 4 10/39 ON ON 1 2 3 4 11/39 12/39 13/39 14/39 15/39 Meg gapixel Speed Dome Camera
Fearless-02.jpg
Fearless One PMC-310-12 NSQI-730-06 Mac Audio MODEL NAME. Fearless One ADDRESS NO. NA-P-310-12 FILE NAME. FearlessOne.PCB REV. A DRAWING CHECK CHECK APPROVED DATE. 2006.02.22 J.S.H Fearless One PMC-310-12
ez-md+_manual01
ez-md+ HDMI/SDI Cross Converter with Audio Mux/Demux Operation manual REVISION NUMBER: 1.0.0 DISTRIBUTION DATE: NOVEMBER. 2018 저작권 알림 Copyright 2006~2018 LUMANTEK Co., Ltd. All Rights Reserved 루먼텍 사에서
SSi Super Systems Inc 1 2 2 2 3-3 4 / 4 5 5 DP2000 11 RETURNING THE UNIT TO SSI 11 SPARE PARTS 12 APPENDIX A 13 APPENDIX B 14 Super System Inc DP2000
SSi Super Systems Inc Model DP 2000 : ( ) / / : -50 to +80 F (-47 to +27 C) : 0 to 120 F (-18 to +49 C) : 115/240 VAC 60Hz : LED Digital : +/- 1 F (+/- 01 C) : 4 20 ma ( ) : 12 V : 8 ( ): 11 x 10 x 7 :
Manufacturing6
σ6 Six Sigma, it makes Better & Competitive - - 200138 : KOREA SiGMA MANAGEMENT C G Page 2 Function Method Measurement ( / Input Input : Man / Machine Man Machine Machine Man / Measurement Man Measurement
Microsoft Power Point 2002
PLC전기공압제어 강의 노트 제 7 회차 PLC 하드웨어의 구조 - 1 - 학습목표 1. PLC 하드웨어의 4가지 구성요소를 설명할 수 있다. 2. PLC 형명을 보고 PLC를 구분할 수 있다. 3. PLC 배선형태에 따라 입력기기와 출력기기를 구분할 수 있다. Lesson. PLC 하드웨어의 구조 PLC 하드웨어에 대한 이해의 필요성 PLC 하드웨어의 구성
나사식볼밸브.indd
HWASUNG VALVES 19~1990 001~010 19. 03 19. 0 1991~000 199. 1 199. 1 199. 11 199. 09 1999. 03 1999. 09 1999. 09 1999. 10 1999. 11 000. 0 000. 03 001~010 001. 03 001. 10 001. 11 00. 0 003. 03 003. 0 00. 01
대경테크종합카탈로그
The Series Pendulum Impact 601 & 602 Analog Tester For Regular DTI-602B (Izod) DTI-601 (Charpy) DTI-602A (Izod) SPECIFICATIONS Model DTI-601 DTI-602 Type Charpy for plastics lzod for plastics Capacity
F-INDEX(9).pdf
act Switches SPECIICAIONS RAING: ma, VDC ELECRICAL LIE:, cycles for gf, gf,gf,, cycles for gf, gf CONAC RESISANCE: m max INSULAION RESISANCE: M min. VDC DIELECRIC SRENG: VAC/ min OPERAION ORCE: gf Yellow
歯Trap관련.PDF
Rev 1 Steam Trap Date `000208 Page 1 of 18 1 2 2 Application Definition 2 21 Drip Trap, Tracer Trap, 2 22 Steam Trap 3 3 Steam Trap 7 4 Steam Trap Sizing 8 41 Drip Trap 8 42 Tracer Trap 8 43 Process Trap
Microsoft Word - FS_ZigBee_Manual_V1.3.docx
FirmSYS Zigbee etworks Kit User Manual FS-ZK500 Rev. 2008/05 Page 1 of 26 Version 1.3 목 차 1. 제품구성... 3 2. 개요... 4 3. 네트워크 설명... 5 4. 호스트/노드 설명... 6 네트워크 구성... 6 5. 모바일 태그 설명... 8 6. 프로토콜 설명... 9 프로토콜 목록...
acdc EQ 충전기.hwp
www.sjproporc.com DIGITAL CHARGER & DISCHARGER Intelligent Balancer SJPROPO 서울특별시 강남구 일원동 642-11 대도빌딩 202호 2006 SJPROPO INC. SJ INCORPORATED 사용 설명서 제품 구성물 동작 중 표시 화면 B L C : B A L A N C E R C O N N E C
D101351X0KR_May17
646 Fisher 646... 1... 1... 3... 4... 4... 4... 5... 5... 5... 6... 7... 7... 7... 9... 9... 9... 9... 10... 11... 12... 12... 13... 15... 15... 15 1. Fisher 646 Fisher 646,,..,,,, 646,.,,.. W6783 1 www.fisher.com
MIL-C-99 Class C, R Style Connector, Receptacle, lectrical, Wall mounting YH7(MS7 Style) PLCS 전기적특성 (lectrical ata) ltitude erating Service Rating Nom
MIL-C-99 Class C, R Style MIL-C-99 Class C, R Style 주문정보 및 부품번호 구분 (Ordering Information) MS7 C 0 C 7 P W MS Number Shell Style Class Contact rrangement Contact Style Polarizing Position MS Number Shell
歯RCM
Reliability Centered Maintenance Page 2 1.,,,. Mode Component, Sub-system, System, System. Reliability Centered Maintenance :, program? Mechanism Page 3 Page 4. Mode Mode () () (FMEA) (FTA) (LTA) System
Microsoft Word - USB복사기.doc
Version: SD/USB 80130 Content Index 1. Introduction 1.1 제품개요------------------------------------------------------------P.02 1.2 모델별 제품사양-------------------------------------------------------P.04 2. Function
Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (%
http://wwwtechnonetcokr (Aluminum & Aluminum BasedAlloy) : LG 1 Aluminum Table 1, 2 1000 7000 4 Al 990% Al 1XXX AlCu 2XXX AlMn 3XXX AlSi 4XXX AlMg 5XXX AlMgSi 6XXX AlZn(Mg, Cu) 7XXX 8XXX ( ) 9XXX Fig 1
7 LAMPS For use on a flat surface of a type 1 enclosure File No. E Pilot Lamp File No. E Type Classification Diagram - BULB Type Part Mate
7 LAMPS For use on a flat surface of a type 1 enclosure File No. E242380 Pilot Lamp File No. E242380 Type Classification Diagram - BULB Type Part Materials 226 YongSung Electric Co., Ltd. LAMPS
<4D F736F F F696E74202D F FB5BFBACEC7CFC0CCC5D820B1E8BFA9C8B22E BC8A3C8AF20B8F0B5E55D>
Back Metal 면이 Drain 인 Vertical channel MOSFET 의 Wafer Test 에서 Chuck 을사용하지않는 RDSON 측정방법 동부하이텍검사팀김여황 I RDSON II Conventional Method III New Method IV Verification (Rdson) V Normal Test Item VI Conclusion
Orcad Capture 9.x
OrCAD Capture Workbook (Ver 10.xx) 0 Capture 1 2 3 Capture for window 4.opj ( OrCAD Project file) Design file Programe link file..dsn (OrCAD Design file) Design file..olb (OrCAD Library file) file..upd
<BACEBDBAC5CD20BAEAB7CEBCC52D A2DC3D6C1BE2D312D E6169>
DOOCH PUMP Intelligent pressure boosting system 5Hz BOOSTER PUMP SYSTEM Water supply system Pressure boosting system Irrigation system Water treatment system Industrial plants 두크펌프 www.doochpump.com CONTENTS
Slide 1
Clock Jitter Effect for Testing Data Converters Jin-Soo Ko Teradyne 2007. 6. 29. 1 Contents Noise Sources of Testing Converter Calculation of SNR with Clock Jitter Minimum Clock Jitter for Testing N bit
DIB-100_K(90x120)
Operation Manual 사용설명서 Direct Box * 본 제품을 사용하기 전에 반드시 방송방식 및 전원접압을 확인하여 사용하시기 바랍니다. MADE IN KOREA 2009. 7 124447 사용하시기 전에 사용하시기 전에 본 기기의 성능을 충분히 발휘시키기 위해 본 설명서를 처음부터 끝까지 잘 읽으시고 올바른 사용법으로 오래도록 Inter-M 제품을
<4D6963726F736F667420506F776572506F696E74202D2028B9DFC7A5BABB2920C5C2BEE7B1A420B8F0B5E220C8BFC0B220BDC7C1F520BDC3BDBAC5DB5FC7D1B1B94E4920C0B1B5BFBFF85F3230313020505620576F726C6420466F72756D>
태양광 모듈 효율 실증 테스트 시스템 National Instrument Korea 전략마케팅 / 팀장 윤 동 원 1 회사 소개 소재: 미국 텍사스 오스틴 설립일: 1976년 지사 및 직원: 40여 개국의 지사, 4,300명의 직원 2007년 매출: $740M R&D 투자: 1) 사업비의 16% R&D 투자 2) 1,400명 이상의 R&D인력 대표 제품: LabVIEW,
Ultimate High Performance Audio tx-usb Operating Instructions Rev : 1.0
Ultimate High Performance Audio tx-usb Operating Instructions Rev : 1.0 www.sotm-audio.com 주의사항및 A/S 정보 사용자주의사항 반드시본사용설명서를모두읽은후제품을사용하십시오. 제품의분해, 개조등을하지마십시오. 제품에진동, 충격을가하지마십시오. 손상되거나피복이벗겨진 cable은사용하지마십시오.
(Exposure) Exposure (Exposure Assesment) EMF Unknown to mechanism Health Effect (Effect) Unknown to mechanism Behavior pattern (Micro- Environment) Re
EMF Health Effect 2003 10 20 21-29 2-10 - - ( ) area spot measurement - - 1 (Exposure) Exposure (Exposure Assesment) EMF Unknown to mechanism Health Effect (Effect) Unknown to mechanism Behavior pattern
D103198X0KR_Jul18 Korean
Fisher i2p-100... 1... 1... 2... 2... 2... 5... 7... 7... 8... 9... 10... 10... 11... 12... 12... 12... 12... 14... 14... 16... 16... 17... 18 1. Fisher i2p-100 W8710... 19... 20 Fisher i2p 100,, ( 1 )..,,,,
1508 고려 카달록
트레이용난연케이블의특징 0./1kV XLPE Insulated and Tray FlameRetardant PVC ed Cable (TFRCV) 0./1kV XLPE Insulated and Tray FlameRetardant PVC ed Aluminium Power Cable (TFRCV/AL) 0./1kV XLPE Insulated HalogenFree Flame
전자교탁 사양서.hwp
사 양 서 품 목 단 위 수량 SYSTEM CONSOLE EA 32 - 사용자에 따른 타블렛 모니터 저소음 전동 각도 조절기능이 내장된 교탁 - 교탁 상/하부 별도의 조립이 필요 없는 일체형(All in One type) CONSOLE - 상판에 리미트 센서를 부착하여 장비 및 시스템의 안정성 강화 - 금형으로 제작, 슬림하고 견고하며 마감이 깔끔한 미래지향적
Product A4
2 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 3 4 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 5 PI Increasing Performance PES PPSU PSU
DBPIA-NURIMEDIA
한국소음진동공학회 2015추계학술대회논문집년 Study of Noise Pattern and Psycho-acoustics Characteristic of Household Refrigerator * * ** ** Kyung-Soo Kong, Dae-Sik Shin, Weui-Bong Jeong, Tae-Hoon Kim and Se-Jin Ahn Key Words
歯메뉴얼v2.04.doc
1 SV - ih.. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 - - - 23 24 R S T G U V W P1 P2 N R S T G U V W P1 P2 N R S T G U V W P1 P2 N 25 26 DC REACTOR(OPTION) DB UNIT(OPTION) 3 φ 220/440 V 50/60
인켈(국문)pdf.pdf
M F - 2 5 0 Portable Digital Music Player FM PRESET STEREOMONO FM FM FM FM EQ PC Install Disc MP3/FM Program U S B P C Firmware Upgrade General Repeat Mode FM Band Sleep Time Power Off Time Resume Load
PowerChute Personal Edition v3.1.0 에이전트 사용 설명서
PowerChute Personal Edition v3.1.0 990-3772D-019 4/2019 Schneider Electric IT Corporation Schneider Electric IT Corporation.. Schneider Electric IT Corporation,,,.,. Schneider Electric IT Corporation..
전용]
![전용]](/thumbs/94/120626960.jpg "전용]")
A Study of select the apropos processing mechanical method by the presume of transformation of teeth s surface degree ABSTRACT This study has been tried to select the apropos processing method by the
<313920C0CCB1E2BFF82E687770>
韓 國 電 磁 波 學 會 論 文 誌 第 19 卷 第 8 號 2008 年 8 月 論 文 2008-19-8-19 K 대역 브릭형 능동 송수신 모듈의 설계 및 제작 A Design and Fabrication of the Brick Transmit/Receive Module for K Band 이 기 원 문 주 영 윤 상 원 Ki-Won Lee Ju-Young Moon
EP-B-P211.eps
PFA/PFW Series PFA Series PFW Series PF00 Series Alphabet Index 8 A COM B COM DCV GND F.G. R.S. HOLD COM BANK BANK COUNT PRESET FUNC. AC00~0VCOM OUTOUTOUTOUTOUTS.STOP RD SD SG RS-C PFA/PFW Series, N M/C
10신동석.hwp
(JBE Vol. 21, No. 5, September 2016) (Regular Paper) 21 5, 2016 9 (JBE Vol. 21, No. 5, September 2016) http://dx.doi.org/10.5909/jbe.2016.21.5.760 ISSN 2287-9137 (Online) ISSN 1226-7953 (Print) LED a),
歯전용]
![歯전용]](/thumbs/91/107045760.jpg "歯전용]")
2001. 9. 6 1. 1. (1) (1) 1 (2) (2) 2 3 INVESTER PROFESIONAL ORGANIZATION GOVERNMENT CODE COMMITTEE SPECIFICATION CODE LAW LICENSE PERMIT PLANT 4 5 6 7 2. (1) 2. (1) 8 9 (2) (2) 10 (3) ( ). () 20kg/ (P70,
PowerPoint 프레젠테이션
........................... ½ ¼ ½ ¾ ................................................ ...........................................................................
GLHPS-D
Digital Hot Plate & Stirrer GLHPS-D 글로벌랩의 제품을 구입하여 주셔서 감사드립니다. 제품을 사용하시기 전에 안전을 위한 준비사항 을 읽고 올바르게 사용해 주십시오. 이 사용설명서는 제품을 직접 사용하시는 분에게 보내어지도록 하여 주십시오. 사용 전 주의 사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 막기 위한 내용으로 반드시
EMCA-EC_STO_BES_E_ a_ k1
EMCA-EC-67-... ko STO Safe torque off (STO) 8080389 2017-10a [8080384] EMCA-EC-S1-KO Tyco Electronics ( ). : :, : 1. / 2 Festo EMCA-EC-67-... 2017-10a ... 4... 4... 4 1... 6 1.1... 6 1.1.1 STO (Safe torque
Genie Industries http//wwwgenieliftcom Copyright 00 Genie Industries 1, 00 1, Genie Genie Industri
유지보수정보 Second Edition Second Printing Part No 8415 Genie Industries 1 8 9 11 13 16 0 1 5 8 36 http//wwwgenieliftcom techpub@genieindcom Copyright 00 Genie Industries 1, 00 1, 003 9 Genie Genie Industries
THE JOURNAL OF KOREAN INSTITUTE OF ELECTROMAGNETIC ENGINEERING AND SCIENCE Sep.; 30(9),
THE JOURNAL OF KOREAN INSTITUTE OF ELECTROMAGNETIC ENGINEERING AND SCIENCE. 2019 Sep.; 30(9), 712 717. http://dx.doi.org/10.5515/kjkiees.2019.30.9.712 ISSN 1226-3133 (Print) ISSN 2288-226X (Online) MOS
요약문 1 요 약 문 1. 과 제 명 : 소음노출 저감을 위한 작업환경관리 및 측정방안 연구 2. 연구기간 : 2007 1. 1 ~ 2007. 12. 31. 3. 연 구 자 : 연구책임자 장 재 길 (연구위원) 공동연구자 정 광 재 (연구원) 4. 연구목적 및 필요성
보건분야-연구자료 연구원 2007-102-1027 소음노출 저감을 위한 작업환경관리 및 측정방안 요약문 1 요 약 문 1. 과 제 명 : 소음노출 저감을 위한 작업환경관리 및 측정방안 연구 2. 연구기간 : 2007 1. 1 ~ 2007. 12. 31. 3. 연 구 자 : 연구책임자 장 재 길 (연구위원) 공동연구자 정 광 재 (연구원) 4. 연구목적 및 필요성
분 기 보 고 서 (제 13 기) 사업연도 2014년 01월 01일 2014년 09월 30일 부터 까지 금융위원회 한국거래소 귀중 2014년 11월 21일 제출대상법인 유형 : 면제사유발생 : 주권상장법인 해당사항 없음 회 사 명 : 주식회사 신화콘텍 대 표 이 사 :
목 분 기 보 고 서...1 대표이사 등의 확인...2 I. 회사의 개요...3 1. 회사의 개요...3 2. 회사의 연혁...4 3. 자본금 변동사항...7 4. 주식의 총수 등...8 5. 의결권 현황...11 6. 배당에 관한 사항 등...11 II. 사업의 내용...14 III. 재무에 관한 사항...45 IV. 감사인의 감사의견 등...50 V. 이사의
SW_faq2000번역.PDF
FREUENTLY ASKED UESTIONS ON SPEED2000 Table of Contents EDA signal integrity tool (vias) (via) /, SI, / SPEED2000 SPEED2000 EDA signal integrity tool, ( (via),, / ), EDA, 1,, / 2 FEM, PEEC, MOM, FDTD EM