YH series VG9524 Style Connector ISO 9001/ ISO14001 YH series VG9524 Style Connector ISO 9001/ ISO14001 주문정보 (Ordering Information) VG Nomenclature Se

Transcription

1 개요 (Overview) VG9524 규격과일치하는, YH-Bayonet 시리즈커넥터입니다. 이커넥터는 MIL-TL-5015의나사식결합방식을 bayonet 방식으로개량하여결합 / 분리가쉽도록제작된커넥터입니다. 진동에의한유체침투로부터보호를목적으로하는곳에사용하는데적합하도록설계된제품이며, 결합 / 분리가쉽도록설계되었습니다. 항공기및군용차량, 전차, 배등의장비및정보통신장비등에사용되고있습니다. The YH-Bayonet Connector Series was designed in accordance with the VG9524 specification. The connectors bayonet coupling method, improved from screw-type MIL-TL-5015, provide easy mating/unmating. The product was designed to be used for protection from penetration of fluids by vibration and provides easy mating/unmating. It is used as parts and communication devices in aircraft and military vehicles, electric vehicles, and ships. Introduction Overview Ordering Information 4 Technical data 6 Mounting Holes 8 Information about insulator contact 10 Contact rrangement 11 lternate Insert Position 1 절연체 (Insulator) NBR(Nitrile Butadiene Rubber) CR(Chloprene Rubber) YHB Series VG9524 Style Box Mounting Receptacle 14 Thru-Bulkhead Receptacle 15 Straight Plug, Shielded 16 Wall Mounting Receptacle 17 Receptacle For Front Panel Mounting 18 Straight Plug 24 Jam Nut Receptacle 0 Plug 90 Shielded 1 내유성이우수함 ( 경유, 휘발유 ) 내후성, 내약품성, 내유성, 난연성, 오존성, 내열성, 노화성이우수함 장점 내마모성, 내수성, 내노화성이우수함 가스투과성이적음 접착력이우수함 굴곡파열성, 내마모성이우수함 내열성 +150 까지사용가능함 가격 낮음 높음 연합정밀에서는 NBR 보다가격및성능면에서우수한 CR 고무를사용한절연체제품만을생산하여사용하고있습니다. VG/YH-B, YHB Contact Pin Contacts (WG, Metric) Socket Contacts (WG, Metric) 4 Pin Contacts 5 NBR(Nitrile Butadiene Rubber) xcellence of Fluid-resistance (iesel, Gasoline) CR(Chloprene Rubber) xcellence of Weather-resistance, Chemical gent, Fluid-resistance, Flameability, Heat-resistance, Heat ging test and Ozone-resistance VG9524 Style ccessories Metal ust Caps With Chain 6 ummy Receptacle 6 Cable Clamps 7 Rubber bushing 7 ngular O-ring for sealing 8 Sealing plug 8 Merit xcellence of brasion-resistance, Water-Resistance and Heat ging test Low in Permeability of gas High level of adhension xcellence of Flexibility and brasionresistance Heat-resistance, it is able to stand up to +150 Price Lower Higher Yeonhab Precision has produced and use and Insulator of only use a CR rubber, which was excellect price and performance compare with NBR. YONHB PRCISION CO., LT.

2 YH series VG9524 Style Connector ISO 9001/ ISO14001 YH series VG9524 Style Connector ISO 9001/ ISO14001 주문정보 (Ordering Information) VG Nomenclature Series Shell Type Shell Size Contact rrangement Contact Class Contact Type lternate Insert Position Series VG9524 VG S 1 N Shell Type J1, J2, N1, N2, S1, U1, U2 - Wall Mounting Receptacle F - Cable Connection Plug, B1, B2 - Box Mounting Receptacle C1, C2 - Bulkhead Receptacle, G, H, L, M, R1 - Straight Plug, 1, K - Plug 90 Shell Size 10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 2, 6 Contact rrangement Refer to VG9524 specification Contact Class P - Pin Contact S - Socket Contact Contact Type YONHB Nomenclature YH S X - B - *** Shell Type Class Shell Size Contact rrangement Contact Class lternate Insert Position Connector Coupling Method (Bayonet Coupling) Measurement Information Shell type YH100 - Wall Mounting Receptacle YH101 - Cable Connection Plug YH102 - Box Mounting Receptacle YH106 - Plug, Straight YTBF - Bulkhead Receptacle nvironmental rating - appropriately uses clamp and bushings in flexible rubber insulator and end bell. Shell size 10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 2, 6 Contact rrangement Refer to the VG9524 specification and MIL-ST Contact Class P - Pin Contact S - Socket Contact lternate Insert Position Refer to the VG9524 specification and MIL-ST Letter 1 indicates the electrical wire size. lternate Insert Position Refer to VG9524 specification. VG ccessories VG9524 BO - ummy Receptacle VG Gaskets, Front Mount VG9524 H - Gaskets, Rear Mount VG9524 KR - Protecting Caps VG9524 KB - Protecting Caps VG9524 KK - Cable Caps VG9524 KT - Bushing Connector Coupling Method Bayonet Coupling Measurement Information 01-Metric clamping contact 02-Uses heat shrink boots in adaptor. WG clamping contact 0-Uses heat shrink boots in adaptor. Metric clamping contact 04-Rear Mount. Screw-type hole flange. Metric clamping contact 05-Rear Mount. Screw-type hole flange. Soldering type contact (YH100, YH102, YTBF applied) 06-Heat shrink boot adaptor. Screw-type hole flange. Soldering type contact end bell. Screw-type hole flange (YH100 applied) end bell. Through-hole flange (YH100 applied) 1 - shield version. Soldering type contact 14 - shied version. Metric clamping contact shield version. WG clamping contact. 2 - end bell structure for shield system cable. MTV F80. Rear mount. Screw-type flange(yh102 applied) 111-Rear amount. screw-type flange(yh102 applied). Soldering type contact. F80-WG clamping contact Zinc cobalt plating(black) 주문정보 (Ordering Information) YONHB Nomenclature Type Material Type Shell Style nvironmental Rating Shell Size Contact rrangement Contact Class lternate Insert Position Contact Type (no letter indicates soldering-type contact) Product Type YHB-General connector YHBG-MI Ground Finger type connector Material Type Blank - Standard(CR) insulator V - Silicon(SR) insulator Shell Style 01 - In-Line Receptacle 02/00 - Front Panel Mount Receptacle 0/00 - Rear Panel Mount Receptacle 06 - Straight Plug 07 - Single Hole Mount Jamnut Receptacle, No Rear Thread Single Hole Mount Jamnut Receptacle, With Rear Thread Plug Shell Size 10SL, 14S, 16S, 16, 18, 20, 22, 24, 28, 2, 6 Contact rrangement Refer to the VG9524 specification and MIL-ST lternate Insert Position Refer to the VG9524 specification and MIL-ST Contact Type F80-WG clamping contact CR-Metric clamping contact Blank - soldering contact YHB V 06 G P X - F80 nvironmental Rating It is based on the accessories and backshell that seal according to each rating. G - heat shrink boots are used for end bell accessories. includes grommet and bushing. (applicable to 01,00,00, 06) G - excludes grommet and bushing from G rating R - other accessories are used for end bell accessories. includes grommet and bushing. (08-90 end bell) SB - MI blade and heat shrink boots used. includes grommet and bushing. SBT - MI blade, heat shrink ring and heat shrink boots used. includes grommet and bushing. F - includes cable clamp and rubber bushing. F- excludes grommet and bushing from F rating FP - the panel mounting hole is a through-hole type RG - MI coil ground finger tyle (applicable to 07, 070) Contact class P - Pin Contact S - Socket Contact 4 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 5

3 YH series VG9524 Style Connector ISO 9001/ ISO14001 기술적정보 (Technical ata) 기술적정보 (Technical ata) lectrical Information Contact Resistance (Milivolt testing) Mechanical characteristics Contact Separating Force lectrical Information (+20 ) mbient temperature Contact Rating Current Voltage testing per service rating Material Temperature range Separating Force(Min) Metric WG Testing Voltage (Vrms) Standard(CR) insulator -55 ~ +125 Metric WG N Gauge /15S 16/16S / Instruments B Required to meet the testing no. 5.1 in Part 2 of VG9519 and Part 1 of VG95210 Silicon(SR) insulator -0 ~ +200 Vibration testing 200m s2에서 10~2000Hz Coupling testing 500 times G S/15 16S/ G G / G G G 9.04 Contact Resistance ir and Creepage Paths() () Voltage Rating Instr. ir and Creepage Paths Separating force needs to be measured accurately according to the testing no. 5.7 in Part 2 of VG9519. testing gauge is used. VG9519 Part 2 의시험번호 5.12 와 VG95210 Part 2 의시험조건 B 와일치할것. Gauge (VG9524, Part 1) Coupling Torque 표준 (CR) 절연체 > 1000MΩ 실리콘 (SR) 절연체 > 5000MΩ Required to meet the testing no in Part 2 of VG9519 and testing condition B in Part 2 of VG Standard(CR) insulator > 1000MΩ Silicon(SR) insulator > 5000MΩ Shell Size pproved Coupling Torque Locking and unlocking Nm unlocking Nm Min 10SL Current Rating (according to ambient temperature) Contact Resistance (Milivolt testing) Gauge L S S/ G G G G G G , 0 Coupling torque is tested according to the testing no in Part 2 of VG Contact Resistance is tested according toe the testing no in Part 2 of VG9524 and Part 7 of VG It represents the actually measured point , 4 Contact Rating Current Metric WG mω Contact Retention Force Material and protection coating () Operating Current /100, 8 25, 12 15/15S, 16/16S S/15 16/16S / Testing power Metric WG N S/15 16S/ Body Standard protection coating Substitute protection coating Insulator and grommet aluminum alloy cadmium plating(viridescent color) on top Zinc cobalt plating(black Chloroprene Rubber(standard) Slicone Rubber(for high temperature) / Contact Copper alloy mbient temperature ( ) Protection coating Hard silver plating Contact Retention Testing must meet the testing no. 5.4 in Part 2 of VG9519. Testing power direction = locking direction. 6 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 7

4 Mounting Holes YHB Series (VG9524 Style) Mounting Holes 장비에사각형코넥터장착을위하여패널에구멍을뚫는다 VG9524 Style, B1, B2, C1, C2, J1, J2, N1, N2 적용. YH-B 시리즈 YH100-B, YH102-B, YTBF-B 적용. Holes are made in the panel to mount the quadrangle connector on the equipment. pplicable to VG9524 Style, B1, B2, C1, C2, J1, J2, N1, N2. pplicable to YH-B Series including YH100-B, YH102-B, YTBF-B. YHB07, 070 pplication Shell Size 5 H12 Screws To Be Used Style YH102-B Style B1,B2,C1,C2 J1,J2,N1,N2 YH100-B YTBF-B/-05 Style,B2,C2,J2,N2 YH-B Mod.-05 Style B1,C1,J1,N1 YH100-B YH102-B Style,B2,C2,J2,N2 YH-B Mod.-05 Style B1,C1,J1,N1 YH100-B YH102-B YTBF-B 10SL IN 85-M... IN 84-M S IN 85-M... IN 84-M S IN 85-M... IN 84-M IN 85-M... IN 84-M IN 85-M... IN 84-M IN 85-M... IN 84-M IN 85-M... IN 84-M IN 85-M.5... IN 84-M IN 85-M.5... IN 84-M IN 85-M4... IN 84-M IN 85-M4... IN 84-M5... Size SL S S/ Harnessing VG9524 코넥터는하네스에사용되는개개의전선을위해설계되었습니다. 완전밀봉을위해서 MIL-W-5086, LN9251(WG 전선 ) 그리고 TL 와 TL (metric 전선 ) 과일치하는전선을사용해야만보증할수있습니다. 모든다른전선들은표에제공되어진자료로전선과절연체외경들에따라야합니다. Clamping and soldering type contact Insulator external diameter WG Metric WG VG9524 connector was designed for individual wires used for harnessing. Complete sealing is guaranteed only when the wires that match MIL-W-5086, LN9251(WG wire), TL , and TL (metric wire) are used. ll other wires need to follow the wires and insulator external diameter provided in the table S/15S 16/ Metric mm2 WG Metric mm YHB02 pplication Size Screw hole application YHB00, 0, 00 pplication Size Screw hole application 10SL SL S S S/ S/ Wire Stripping 기계적탈피또는고온탈피중익숙한방법을택하여탈피한다. 도체또는절연체의손상을방지한다. 납땜용접점은납땜작업이용이하도록 탈피된도체에주석을입힌다. ither mechanical stripping or high temperature stripping needs to be used. amage to the conductor or insulator is to be prevented. Tin is coated on the stripped conductor for easy soldering with soldering type contact. Stripping length WG Metric mm S/15S 16/ / MI Ground Finger Type Connector Yeonhab Precision VG9524 Style M, L, K Yeonhab Precision Style YH106-B , YHBG (06, 08) MI Ground Finger 8 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 9

5 Information about Insulator Contact rrangement VG9524 Style접점배열도 (Contact rrangements) Contact rrangement VG. Contact rrangement Service Rating Total No. of Contact lternate Insert Position Metric/WG Metric 15S/16S 15/16 25/ W X Y Z Shell Size 10 Shell Size 14 Shell Size 16 10SL- 10SL- 10SL-4 10SL S-1 14S-5 I S-6 14S-6 I S-12 16S-1 16S Insert rrangement 10SL- Shell Size 16 10SL S-1 Shell Size 18 14S-5 5 instr. 14S-6 6 instr. 14S-12 16S # , I Insert rrangement # #4 #12-2, (B,C,F,G) instr. (all others) #12-1, # # Shell Size 18 Shell Size , I I I Insert rrangement # I #0 20- # #12 (J) instr. (all others) Shell Size , I I Insert rrangement instr. Shell Size # #8-, # instr , , I Insert rrangement 22-2 # #8-2, #0-1, # , Shell Size 22 Shell Size , I The above arrangement has been developed by the Company for VG9524 specification and MIL-ST-1651 arrangement. * For other necessary arrangement than the above arrangement, refer to the MIL-ST-1651 arrangement and contact the Company for development of other arrangements. Insert rrangement #12 (H) (all others) # #8 #8-, # #4-2, #12-1. viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. 10 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 11

6 VG9524 Style접점배열도 (Contact rrangements) Shell Size 24 VG9524 Style (Contact rrangements) Shell Size 6 Insert rrangement #12-2, #8 instr # instr. Shell Size 28 Insert rrangement 6-6 #0-,# #0 #0-2,# viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. Insert rrangement #4-2, #12-1, # #12-6, #4-2, #8-2, #12- (,B,C,,,F) (G) #12-4, -18 절연체회전위치 (lternate Insert Positions) Shell Size 28 키회전문자 W, X, Y, Z에따라회전하며, 문자표시가없거나문자가 N인경우는중심선 (Centerline) 에절연체키홈이위치한다. 코넥터의절연체배열및회전위치는 VG9524 및 MIL-ST-1651에따른다. 위배열외개발가능배열은당사에문의바랍니다. It rotates following the key rotation letters W, X, Y, and Z. If there is no letter or the letter is N, insulator key hole is located at the center line. Insulator arrangement and rotation position of the connector follows VG9524 specification and MIL-ST Contact the Company for other possible arrangement that can be devleoped. Insert rrangement #4-, #4-4, -5 () instr. (all others) Shell Size 2 Insert rrangement #0-2, #12- () (all others) # #12-7, -28 instr. (,B,U,I) (all others) #0-2, #12-6 Shell Size 2 Insert rrangement # #4 #0-2, viewed from the front of Pin insert (+ insulator) 2. Contact the Company for other information not contained in the above figure. 12 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 1

7 YHB Series (VG9524 Style) Box Mounting Receptacle VG9524 Style Box Mounting Receptacle VG9524 Style B2 YH102-B 와옵션에따른개량정보참조정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) 패널장착홀은구멍임. YH102-B and options.square flange type and mounted in front of the panel (panel is positioned at the back of flange). Panel mounting hole is a hole type. YH102-B 와옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함.( 패널이플랜지전면에붙음 ) 패널장착홀은구멍임. YH102-B and options. Square flange type and mounted at the back of the panel (panel is positioned in front of flange). Panel mounting hole is a hole type YH10210SL-**-B-*** YH10212S-**-B-*** YH10214S-**-B-*** YH10216S-**-B-*** YH10216-**-B-*** YH10218-**-B-*** YH10220-**-B-*** YH10222-**-B-*** YH10224-**-B-*** YH10228-**-B-*** YH1022-**-B-*** YH1026-**-B-*** YH10210SL-**-B-*** YH10212S-**-B-*** YH10214S-**-B-*** YH10216S-**-B-*** YH10216-**-B-*** YH10218-**-B-*** YH10220-**-B-*** YH10222-**-B-*** YH10224-**-B-*** YH10228-**-B-*** YH1022-**-B-*** YH1026-**-B-*** Box Mounting Receptacle Thru-Bulkhead Receptacle VG9524 Style B1 YH102-B 와옵션에따른개량정보참조. (-04, -109, -111) 정사각형플랜지형상이며패널의뒤쪽에장착함. ( 패널이플랜지전면붙음 ) 패널장착홀은나사임. YH102-B and options. (-04, -109, -111) Square flange type and mounted at the back of the panel (panel is positioned in front of flange). Panel mounting hole is a screw type. VG9524 Style C1 YTBF-B 와옵션에따른개량정보참조. 플러그방식의 코넥터를중간에서연결시켜주는역할을하는양방향 정사각형플랜지형상의제품임. 패널장착홀은나사임. YTBF-B and options.it is a two-way square flange type product that connects plug-type connectors in the middle. Panel mounting hole is a screw type. O-Ring 0 ± YH10210SL-**-B-*** 16.2 M4x YH10212S-**-B-*** 16.2 M4x YH10214S-**-B-*** 19.2 M4x YH10216S-**-B-*** 22.4 M4x YH10216-**-B-*** 22.4 M4x YH10218-**-B-*** 25.6 M4x YH10220-**-B-*** 29.0 M4x YH10222-**-B-*** 2.0 M4x YH10224-**-B-*** 5. M4x YH10228-**-B-*** 41.4 M5x YH1022-**-B-*** 47.8 M5x YH1026-**-B-*** 52.6 M5x YTBF-10SL-**-B-*** M4x YTBF-12S-**-B-*** M4x YTBF-14S-**-B-*** M4x YTBF-16S-**-B-*** M4x YTBF-16-**-B-*** M4x YTBF-18-**-B-*** M4x YTBF-20-**-B-*** M4x YTBF-22-**-B-*** M4x YTBF-24-**-B-*** M4x YTBF-28-**-B-*** M5x YTBF-2-**-B-*** M5x YTBF-6-**-B-*** M5x YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 15

8 YHB Series (VG9524 Style) Thru-Bulkhead Receptacle Wall Mounting Receptacle VG9524 Style C2 YTBF-B 와옵션에따른개량정보참조. (-05) 플러그방식의코넥터를중간에서연결시켜주는 역할을하는양방향정사각형플랜지형상의제품임. 패널장착홀은구멍임. YTBF-B and options. It is a two-way square flange type product that connects plug-type connectors in the middle. Panel mounting hole is a hole type. YTBF-10SL-**-B-*** YTBF-12S-**-B-*** YTBF-14S-**-B-*** YTBF-16S-**-B-*** YTBF-16-**-B-*** YTBF-18-**-B-*** YTBF-20-**-B-*** YTBF-22-**-B-*** YTBF-24-**-B-*** YTBF-28-**-B-*** YTBF-2-**-B-*** YTBF-6-**-B-*** ±0.7 O-Ring +0. VG9524 Style N1 YH100-B 와옵션에따른개량정보참조. (-1, -14, -15, -05-1, , 05-15) 정사각형플랜지타입코넥터로엔드벨악세사리에 MI 브레이드와부트를사용할수있으며, 절연체패킹 및부싱이포함되어전선방수가가능한구조임. 패널장착홀은나사임 YH106-B and options.(-1,-14,-15,-05-1,-05, -04,05-15) It is a square flange type connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Panel mounting hole is a screw-type. ±0.5 4 YH10010SL-**-B-*** M4x YH10012S-**-B-*** M4x YH10014S-**-B-*** M4x YH10016S-**-B-*** M4x YH10016-**-B-*** M4x YH10018-**-B-*** 0.80 M4x YH10020-**-B-*** 4.20 M4x YH10024-**-B-*** M4x YH10028-**-B-*** M5x YH1002-**-B-*** 5.40 M5x YH1006-**-B-*** M5x Straight Plug, Shielded VG9524 Style M YH106-B 와옵션에따른개량정보참조. (-1, -14, -15) MI 핑거타입플러그코넥터로서엔드벨악세사리에 MI 브레이드와부트를사용할수있으며, 절연체패킹 및부싱이포함되어전선방수가가능한구조임. YH106-B and options.(-1,-14,-15) It is an MI finger type plug connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Wall Mounting Receptacle VG9524 Style N2 YH100-B 와옵션에따른개량정보참조. 정사각형플랜지타입코넥터로엔드벨악세사리에 MI브레이드와부트를사용할수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. 패널장착홀은구멍임. YH106-B and options. It is a square flange type connector that can be used with MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. Panel mounting hole is a hole-type. ± ±0.5 ± YH10610SL-**-B-*** YH10612S-**-B-*** YH10614S-**-B-*** YH10616S-**-B-*** YH10616-**-B-*** YH10618-**-B-*** YH10620-**-B-*** YH10624-**-B-*** YH10628-**-B-*** YH1062-**-B-*** YH1066-**-B-*** YH10010SL-**-B-*** YH10012S-**-B-*** YH10014S-**-B-*** YH10016S-**-B-*** YH10016-**-B-*** YH10018-**-B-*** YH10020-**-B-*** YH10024-**-B-*** YH10028-**-B-*** YH1002-**-B-*** YH1006-**-B-*** YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 17

9 YHB Series (VG9524 Style) YHB00F 와옵션에따른개량정보참조. / YHB00F - 절연체패킹및부싱제외. 엔드벨에케이블클램프와고무부싱이포함된 제품이며, 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 정사각형플랜지형상이며, 패널의앞쪽에 장착함. ( 패널이플랜지후면에붙음 ) 패널장착홀은구멍임. YHBOOF and options. YHBOOF - excludes insulator packing and bushing. Its end bell includes cable clamp and rubber bushing. Includes insulator packing and bushing and its structure makes wire water resistance possible. square flange type and mounted in front of the panel. (Panel is positioned at the back of flange) Panel mounting hole is a hole-type. YHB00R 과옵션에따른개량정보참조. 엔드벨에악세사리를함께사용할 수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. 정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) 패널장착홀은구멍임. Refer to the measurement information following YHBOOR and options. ccessories can be used together at end bell and includes insulator packing and bushing and its structure makes wire water resistance possible. square flange type and mounted in front of the panel. (Panel is position at the back of flange) Panel mounting hole is a hole-type (Class : 2) YHB00**-10SL-**-*** YHB00**-14S-**-*** YHB00**-16S-**-*** YHB00**-16-**-*** YHB00**-18-**-*** YHB00**-20-**-*** YHB00**-22-**-*** YHB00**-24-**-*** YHB00**-28-**-*** YHB00**-2-**-*** YHB00**-6-**-*** YHB00R-10SL-**-*** /8-24UNF YHB00R-14S-**-*** /4-20UNF YHB00R-16S-**-*** /8-20UNF YHB00R-16-**-*** /8-20UNF YHB00R-18-**-*** UNF YHB00R-20-**-*** /16-18UNF YHB00R-22-**-*** /16-18UNF YHB00R-24-**-*** /16-18UNF YHB00R-28-**-*** /16-18UNF YHB00R-2-**-*** /4-18UNS YHB00R-6-**-*** UNS In-line receptacle YHB00G 와옵션에따른개량정보참조. / G Style - 절연체패킹및부싱제외. 정사각형플랜지형상이며패널의앞쪽에장착함. 부트를사용할수있으며, 절연체패킹및부싱포함되어전선방수가가능한구조임. ( 패널이플랜지후면에붙음 ) 패널장착홀은구멍임. Refer to the measurement information following YHBOOG and options. G Style - excludes insulator packing and bushing. square flange type product that is mounted in front of the panel. Can use boots and includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned at the back of flange) YHB01R 과옵션에따른개량정보참조. 정사각형플랜지형상이며, 엔드벨에악세사리를함께사용가능함. 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 케이블측에사용함. Refer to the measurement information following YHB01R and options. square flange type and can use accessories together at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. Used for cables (Class: 2) YHB00**-10SL-**-*** YHB00**-14S-**-*** YHB00**-16S-**-*** YHB00**-16-**-*** YHB00**-18-**-*** YHB00**-20-**-*** YHB00**-22-**-*** YHB00**-24-**-*** YHB00**-28-**-*** YHB00**-2-**-*** YHB00**-6-**-*** YHB01R-10SL-**-*** /8-24UNF YHB01R-14S-**-*** /4-20UNF YHB01R-16S-**-*** /8-20UNF YHB01R-16-**-*** /8-20UNF YHB01R-18-**-*** UNF YHB01R-20-**-*** /16-18UNF YHB01R-22-**-*** /16-18UNF YHB01R-24-**-*** /16-18UNF YHB01R-28-**-*** /16-18UNF YHB01R-2-**-*** /4-18UNS YHB01R-6-**-*** UNS 18 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 19

10 YHB Series (VG9524 Style) In-line receptacle YHB01F 와옵션에따른개량정보참조. / YHB01F - 절연체패킹및부싱제외. 정사각형플랜지형상이며, 엔드벨에케이블 클램프와고무부싱포함된제품이며, 절연체패킹및부싱이포함되어 전선방수가가능한구조임. 케이블측에사용함. YHB01F and options. / YHB01F - excludes insulator packing and bushings. square flange type and includes cable clamp and rubber bushings at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. Used for cables. YHB0R 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB0R and options. square flange type and mounted at the back of the panel. (Panel is positioned in front of flange). Panel mounting hole is a screw-type YHB01**-10SL-**-*** YHB01**-14S-**-*** YHB01**-16S-**-*** YHB01**-16-**-*** YHB01**-18-**-*** YHB01**-20-**-*** YHB01**-22-**-*** YHB01**-24-**-*** YHB01**-28-**-*** YHB01**-2-**-*** YHB01**-6-**-*** YHB0R-10SL-**-*** M4x YHB0R-14S-**-*** M4x YHB0R-16S-**-*** M4x YHB0R-16-**-*** M4x YHB0R-18-**-*** M4x YHB0R-20-**-*** M4x YHB0R-22-**-*** M4x YHB0R-24-**-*** M4x YHB0R-28-**-*** M5x YHB0R-2-**-*** M5x YHB0R-6-**-*** M5x VG9524 Style (YHB02R Style) YHB02R 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의앞쪽에장착함. ( 패널이플랜지후면에붙음 ) 패널장착홀은구멍임. YHB00 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 뒤쪽나사부에따른악세사리선택사용가능함. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB01R and options. square flange type and mounted in front of the panel. (Panel is positioned at the back of flange). Panel mounting hole is a hole-type. YHB00 and options. square flange type and mounted at the back of the panel. Can selectively use accessories with screw parts at the back. (Panel is positioned in front of flange). Panel mounting hole is a screw-type (Class : 2) YHB02R-10SL-**-*** YHB02R-14S-**-*** YHB02R-16S-**-*** YHB02R-16-**-*** YHB02R-18-**-*** YHB02R-20-**-*** YHB02R-22-**-*** YHB02R-24-**-*** YHB02R-28-**-*** YHB02R-2-**-*** YHB02R-6-**-*** YHB00-10SL-**-*** M4x /8-24UNF YHB00-14S-**-*** M4x /4-20UNF YHB00-16S-**-*** M4x /8-20UNF YHB00-16-**-*** M4x /8-20UNF YHB00-18-**-*** 0.80 M4x UNF YHB00-20-**-*** 4.20 M4x /8-18UNF YHB00-22-**-*** 7.40 M4x /4-18UNF YHB00-24-**-*** M4x /8-18UNF YHB00-28-**-*** M5x /8-18UNF YHB00-2-**-*** 5.40 M5x /8-16UN YHB00-6-**-*** M5x /16-16UN 20 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 21

11 YHB Series (VG9524 Style) YHB00F 와옵션에따른개량정보참조. / YHB00F - 절연체패킹및부싱제외. VG9524 Style U2 (YHB00GFP Style) 엔드벨에케이블클램프와고무부싱포함된제품이며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. 정사각형플랜지형상이며패널의뒤쪽에장착함. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB00GFP 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 엔드벨에부트를사용할수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. ( 패널이플랜지전면에붙음 ) 패널장착홀은구멍임. YHB00F and options. / YHB00F - excludes insulator packing and bushings. Includes cable clamp and rubber bushings at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. square flange type and mounted at the back of the panel. (Panel is positioned in front of the panel) Panel mounting hole is a screw-type. YHB00FP and options. square flange type and mounted at the back of the panel. Can use accessories together at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned in front of the panel) Panel mounting hole is a hole-type YHB00**-10SL-**-*** M4x YHB00**-14S-**-*** M4x YHB00**-16S-**-*** M4x YHB00**-16-**-*** M4x YHB00**-18-**-*** 0.80 M4x YHB00**-20-**-*** 4.20 M4x YHB00**-22-**-*** 7.40 M4x YHB00**-24-**-*** M4x YHB00**-28-**-*** M5x YHB00**-2-**-*** 5.40 M5x YHB00**-6-**-*** M5x YHB00GFP-10SL-**-*** YHB00GFP-14S-**-*** YHB00GFP-16S-**-*** YHB00GFP-16-**-*** YHB00GFP-18-**-*** YHB00GFP-20-**-*** YHB00GFP-22-**-*** YHB00GFP-24-**-*** YHB00GFP-28-**-*** YHB00GFP-2-**-*** YHB00GFP-6-**-*** YHB00R 와옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 엔드벨에악세사리를함께사용할수있으며, 절연체패킹및부싱이포함되어전선방수가 가능한구조임. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. YHB00R and options. square flange type and mounted at the back of the panel. Can use accessories together at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned in front of the panel) Panel mounting hole is a screw-type. VG9524 Style U1 (YHB00G Style) HB00G 과옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 엔드벨에부트를사용할수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. ( 패널이플랜지전면에붙음 ) 패널장착홀은나사임. HB00G and options. square flange type and mounted at the back of the panel. Can use boots at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned in front of the panel) Panel mounting hole is a screw-type (Class : 2) YHB00R-10SL-**-*** M4x /8-24UNF YHB00R-14S-**-*** M4x /4-20UNF YHB00R-16S-**-*** M4x /8-20UNF YHB00R-16-**-*** M4x /8-20UNF YHB00R-18-**-*** 0.80 M4x UNF YHB00R-20-**-*** 4.20 M4x /16-18UNF YHB00R-22-**-*** 7.40 M4x /16-18UNF YHB00R-24-**-*** M4x /16-18UNF YHB00R-28-**-*** M5x /16-18UNF YHB00R-2-**-*** 5.40 M5x /4-18UNS YHB00R-6-**-*** M5x UNS YHB00G-10SL-**-*** M4x YHB00G-14S-**-*** M4x YHB00G-16S-**-*** M4x YHB00G-16-**-*** M4x YHB00G-18-**-*** 0.80 M4x YHB00G-20-**-*** 4.20 M4x YHB00G-22-**-*** 7.40 M4x YHB00G-24-**-*** M4x YHB00G-28-**-*** M5x YHB00G-2-**-*** 5.40 M5x YHB00G-6-**-*** M5x YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 2

12 YHB00RFP 와옵션에따른개량정보참조. 정사각형플랜지형상이며패널의뒤쪽에장착함. 엔드벨에악세사리를함께사용할수있으며, 절연체패킹및부싱이포함되어전선방수가 가능한구조임. ( 패널이플랜지전면에붙음 ) 패널장착홀은구멍임. YHB00RFP and options. square flange type and mounted at the back of the panel. Can use accessories together at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Panel is positioned in front of the panel) Panel mounting hole is a hole-type. YHB Series (VG9524 Style) Straight Plug VG9524 Style G (YHB06G style) YHB06G, G 와옵션에따른개량정보참조. G Style - 절연체패킹및부싱제외. 플러그타입코넥터로엔드벨악세사리에부트를사용할수있으며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. YHB06G, G and options. G Style - excludes insulator packing and bushings. plug type connector and can use boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible (Class : 2) 4 5 YHB00RFP-10SL-**-*** /8-24UNF YHB00RFP-14S-**-*** /4-20UNF YHB00RFP-16S-**-*** /8-20UNF YHB00RFP-16-**-*** /8-20UNF YHB00RFP-18-**-*** UNF YHB00RFP-20-**-*** /16-18UNF YHB00RFP-22-**-*** /16-18UNF YHB00RFP-24-**-*** /16-18UNF YHB00RFP-28-**-*** /16-18UNF YHB00RFP-2-**-*** /4-18UNS YHB00RFP-6-**-*** UNS YHB06** 10SL-**-*** YHB06** 14S-**-*** YHB06** 18-**-*** YHB06** 20-**-*** YHB06** 22-**-*** YHB06** 24-**-*** YHB06** 28-**-*** YHB06** 2-**-*** Straight Plug YHB06 과옵션에따른개량정보참조. YHBG06 - MI 핑거타입플러그. 플러그코넥터로악세사리없음. 별도사용환경에맞는악세사리적용가능함. YHB06 and options. YHBG06 - MI finger type plug. plug connector and with no accessories. Can use separate accessories suitable for the environment. Straight Plug VG9524 Style H (YHB06R style) YHB06R 과옵션에따른개량정보참조. 플러그코넥터로엔드벨에악세사리등을 함께사용가능하며, 절연체패킹및부싱이 포함되어전선방수가가능한구조임. YHB06R and options. plug type connector and can use accessories at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Class : 2) (Class : 2) YHB*06-10SL-**-*** /8-24UNF YHB*06-14S-**-*** /4-20UNF YHB*06-16S-**-*** /8-20UNF YHB*06-16-**-*** /8-20UNF YHB*06-18-**-*** UNF YHB*06-20-**-*** /8-18UNF YHB*06-22-**-*** /4-18UNF YHB*06-24-**-*** /8-18UNF YHB*06-28-**-*** /8-18UNF YHB*06-2-**-*** /8-16UN YHB*06-6-**-*** /16-16UN YHB06R 10SL-**-*** /8-24UNF YHB06R 14S-**-*** /4-20UNF YHB06R 16S-**-*** /8-20UNF YHB06R 16-**-*** /8-20UNF YHB06R 18-**-*** UNF YHB06R 20-**-*** /16-18UNF YHB06R 22-**-*** /16-18UNF YHB06R 24-**-*** /16-18UNF YHB06R 28-**-*** /16-18UNF YHB06R 2-**-*** /4-18UNS 24 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 25

13 YHB Series (VG9524 Style) Straight Plug, Shielded VG9524 Style L (YHBG06R style) Straight Plug, Shielded VG9524 Style M (YHBG06SB Style) YHBG06R 과옵션에따른개량정보참조. MI 핑거타입플러그코넥터로엔드벨에 악세사리를함께사용가능하며, 절연체 패킹및부싱이포함되어전선방수가 가능한구조임. YHBG06R and options. n MI finger type plug connector and can use accessories at end bell. Includes insulator packing and bushing and its structure makes wire water resistance possible. YHBG06SB 와옵션에따른개량정보참조. YHB06SB - MI 핑커타입아님. MI 핑거타입플러그코넥터로엔드벨 악세사리에 MI 브레이드및부트와함께 사용할수있고, 절연체패킹및부싱이 포함되어전선방수가가능한구조임. YHBG06SB and options. YHB06SB - not MI finger type. n MI finger type plug type connector and can use MI blades and boots in end bell accessories. Includes insulator packing and bushing and its structure makes wire water resistance possible. (Class : 2) ±0.5 V Thread. YHBG06R 10SL-**-*** /8-24UNF YHBG06R 14S-**-*** /4-20UNF YHBG06R 16S-**-*** /8-20UNF YHBG06R 16-**-*** /8-20UNF YHBG06R 18-**-*** UNF YHBG06R 20-**-*** /16-18UNF YHBG06R 22-**-*** /16-18UNF YHBG06R 24-**-*** /16-18UNF YHBG06R 28-**-*** /16-18UNF YHBG06R 2-**-*** /4-18UNS YHB*06SB-10SL-**-*** M16x1.0 YHB*06SB-14S-**-*** M20x1.0 YHB*06SB-16S-**-*** M2x1.0 YHB*06SB-16-**-*** M2x1.0 YHB*06SB-18-**-*** M26x1.0 YHB*06SB-20-**-*** M0x1.0 YHB*06SB-22-**-*** M2x1.0 YHB*06SB-24-**-*** M6x1.0 YHB*06SB-28-**-*** M9x1.0 YHB*06SB-2-**-*** M45x1.0 Straight Plug Straight Plug YHB06SBT 와옵션에따른개량정보참조. 플러그코넥터로엔드벨에 MI 브레이드를열수축 링으로고정하여사용할수있으며, 부트와 함께사용할수있고, 절연체패킹및 부싱이포함되어전선방수가가능한 구조로되어있음. Refer to the measurement information following YHB06SBT and options. plug type connector and can use MI blades that is fixed by heat shrink ring at end bell. Can be used with boots. Includes insulator packing and bushing and its structure makes wire water resistance possible. YHB06F (VG9524 Style ) 와옵션에따른개량정보참조. / YHB06F- 절연체패킹및부싱제외. 케이블클램프와고무부싱을엔드벨과함께코넥터에 연결사용. 절연체패킹및부싱이포함되어 전선방수가가능한구조로되어있음. YHB06F (VG9524 style ) and options. YHB06F - excludes insulator packing and bushings. Uses cable clamp and rubber bushing as well as end bell with connector. Includes insulator packing and bushing and its structure makes wire water resistance possible Smart Ring P/N YHB06SBT-10SL-**-*** TR05 YHB06SBT-14S-**-*** TR07 YHB06SBT-16S-**-*** TR08 YHB06SBT-16-**-*** TR08 YHB06SBT-18-**-*** TR10 YHB06SBT-20-**-*** TR12 YHB06SBT-22-**-*** TR14 YHB06SBT-24-**-*** TR16 YHB06SBT-28-**-*** TR18 YHB06SBT-2-**-*** TR18 YHB06SBT-6-**-*** YHB06**-10SL-**-*** YHB06**-14S-**-*** YHB06**-16S-**-*** YHB06**-16-**-*** YHB06**-18-**-*** YHB06**-20-**-*** YHB06**-22-**-*** YHB06**-24-**-*** YHB06**-28-**-*** YHB06**-2-**-*** YHB06**-6-**-*** YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 27

14 YHB Series (VG9524 Style) Straight Plug, Shielded Straight Plug, Shielded YHB06SBT MI 그라운드핑거없음. 절연체패킹포함, 전선방수구조. MI 브레이드사용할수있는구조. YHB06SBT No MI Ground Finger. Includes insulator packing. Wire water resistant. Can use MI blades. MI Ground Finger YHB06SBT MI 그라운드핑거없음. 절연체패킹포함, 전선방수구조. MI 브레이드사용할수있는구조. YHB06SBT No MI Ground Finger. Includes insulator packing. Wire water resistant. Can use MI blades. MI Ground Finger YHBG06SBT YHBG06SBT YHBG06SBT YHBG06SBT MI 그라운드핑거있음. 절연체패킹포함, 전선방수구조. MI 브레이드사용할수있는구조. MI Ground Finger. Includes insulator packing. Wire water resistant. Can use MI blades. MI 그라운드핑거있음. 절연체패킹포함, 전선방수구조. MI 브레이드사용할수있는구조. MI Ground Finger. Includes insulator packing. Wire water resistant. Can use MI blades. Shell Size Cable ntry Size Smart Ring Shell Size Cable ntry Size Smart Ring YHB*06SBT10SL-***-***-04 10SL 04 TR04xx YHB*06SBT10SL-***-***-05 10SL 05 TR05xx YHB*06SBT14S-***-***-04 14S 04 TR04xx YHB*06SBT14S-***-***-05 14S 05 TR05xx YHB*06SBT14S-***-***-07 14S 07 TR07xx YHB*06SBT16S-***-***-04 16S 04 TR04xx YHB*06SBT16S-***-***-05 16S 05 TR05xx YHB*06SBT16S-***-***-07 16S 07 TR07xx YHB*06SBT16S-***-***-08 16S 08 TR08xx YHB*06SBT16-***-*** TR04xx YHB*06SBT16-***-*** TR05xx YHB*06SBT16-***-*** TR06xx YHB*06SBT16-***-*** TR07xx YHB*06SBT16-***-*** TR08xx YHB*06SBT18-***-*** TR04xx YHB*06SBT18-***-*** TR05xx YHB*06SBT18-***-*** TR06xx YHB*06SBT18-***-*** TR07xx YHB*06SBT18-***-*** TR08xx YHB*06SBT18-***-*** TR10xx YHB*06SBT20-***-*** TR04xx YHB*06SBT20-***-*** TR05xx YHB*06SBT20-***-*** TR06xx YHB*06SBT20-***-*** TR07xx YHB*06SBT20-***-*** TR08xx YHB*06SBT20-***-*** TR10xx YHB*06SBT20-***-*** TR12xx YHB*06SBT22-***-*** TR04xx YHB*06SBT22-***-*** TR05xx YHB*06SBT22-***-*** TR06xx YHB*06SBT22-***-*** TR07xx YHB*06SBT22-***-*** TR08xx YHB*06SBT22-***-*** TR10xx YHB*06SBT22-***-*** TR12xx YHB*06SBT22-***-*** TR14xx YHB*06SBT24-***-*** TR04xx YHB*06SBT24-***-*** TR05xx YHB*06SBT24-***-*** TR06xx YHB*06SBT24-***-*** TR07xx YHB*06SBT24-***-*** TR08xx YHB*06SBT24-***-*** TR10xx YHB*06SBT24-***-*** TR12xx YHB*06SBT24-***-*** TR14xx YHB*06SBT24-***-*** TR16xx YHB*06SBT28-***-*** TR04xx YHB*06SBT28-***-*** TR05xx YHB*06SBT28-***-*** TR06xx YHB*06SBT28-***-*** TR07xx YHB*06SBT28-***-*** TR08xx YHB*06SBT28-***-*** TR10xx YHB*06SBT28-***-*** TR12xx YHB*06SBT28-***-*** TR14xx YHB*06SBT28-***-*** TR16xx YHB*06SBT28-***-*** TR18xx YHB*06SBT2-***-*** TR04xx YHB*06SBT2-***-*** TR05xx YHB*06SBT2-***-*** TR06xx YHB*06SBT2-***-*** TR07xx YHB*06SBT2-***-*** TR08xx YHB*06SBT2-***-*** TR10xx YHB*06SBT2-***-*** TR12xx YHB*06SBT2-***-*** TR14xx YHB*06SBT2-***-*** TR16xx YHB*06SBT2-***-*** TR18xx YHB*06SBT2-***-*** TR20xx YHB*06SBT2-***-*** TR22xx YHB*06SBT6-***-*** TR04xx YHB*06SBT6-***-*** TR05xx YHB*06SBT6-***-*** TR06xx YHB*06SBT6-***-*** TR07xx YHB*06SBT6-***-*** TR08xx YHB*06SBT6-***-*** TR10xx YHB*06SBT6-***-*** TR12xx YHB*06SBT6-***-*** TR14xx YHB*06SBT6-***-*** TR16xx YHB*06SBT6-***-*** TR18xx YHB*06SBT6-***-*** TR20xx YHB*06SBT6-***-*** TR22xx YHB*06SBT6-***-*** TR24xx YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 29

15 YHB Series (VG9524 Style) Jam nut receptacle Plug 90 Shielded YHB07R 과옵션에따른개량정보참조. YHB07RG - MI 코일핑거타입임. 잼너트사각코넥터로패널이 플랜지전면에붙음. pplication of MI finger RG type O-Ring VG9524 Style K (YHBG08R Style) VG9524 Style 1 (YHB08R Style) YHBG08R 과옵션에따른개량정보참조. YHB08R - MI 핑거타입플러그아님. YHB07R specification and options. YHB07RG - MI coil finger type. MI 핑거타입플러그코넥터로 90 엔드벨에악세사리를함께사용가능하며, 절연체패킹및부싱이포함되어전선방수가가능한구조임. jam nut quadrangle connector and the panel is positioned in front of flange. YHBG08R specification and options. YHB08R - not MI finger type. MI finger type plug connector. Can use accessories with 90* end bell. Includes insulator packing and bushings. Wire is water resistant. (Panel thickness) ±0.4 L6 (Class : 2) (Class : 2) YHB07**-16-**-*** /4-18UNF YHB07**-20-**-*** /2-18UNF YHB07**-22-**-*** /8-18UNF YHB07**-24-**-*** /4-18UNF YHB07**-28-**-*** UNS YHB07**-2-**-*** /4-16UN YHB07**-6-**-*** /2-16UN YHB*08** 10SL-**-*** /8-24UNF YHB*08** 20-**-*** /16-18UNF YHB*08** 22-**-*** /16-18UNF YHB*08** 24-**-*** /16-18UNF YHB*08** 28-**-*** /16-18UNF YHB*08** 2-**-*** /4-18UNS Jam nut receptacle Plug 90 YHB070SBT 와옵션에따른개량정보참조. 잼너트사각코넥터로패널이플랜지전면에붙음. MI 브레이드를열수축링으로고정및 부트사용가능함. 절연체패킹및부싱 포함되어전선방수가가능함. YHB070SBT and options. jam nut quadrangle connector and the panel is positioned in front of flange. Can install MI blades with heat shrink ring and can use boots. Includes insulator packing and bushings. Wire is water resistant. O-Ring YHB08SBT 와옵션에따른개량정보참조. 플러그코넥터로 90 엔드벨에 MI 브레이드를열수축링으로 고정하여사용할수있으며, 부트와함께사용할수있고, 절연체패킹및부싱이포함되어전선방수가가능한구조임. YHB08SBT and options. plug connector. Can install MI blades with heat shrink ring and can use boots. Includes insulator packing and bushings. Wire is water resistant Reference (Panel thickness) ±0.4 L6 L7 (Class : 2) Smart Ring Reference Smart Ring P/N YHB070SBT-20-**-*** /2-18UNF TR12 YHB070SBT-22-**-*** /8-18UNF TR18 YHB070SBT-2-**-*** /4-16UN TR18 YHB08SBT-20-**-*** TR12 YHB08SBT-22-**-*** TR14 YHB08SBT-24-**-*** TR16 YHB08SBT-28-**-*** TR18 YHB08SBT-2-**-*** TR18 0 YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 1

16 Plug 90 VG/YH-B, YHB Contact Pin Contacts (WG, Metric) YHB08F (VG9524 Style ) 와옵션에따른개량정보참조. YHB08F - 절연체패킹및부싱제외. 케이블클램프와고무부싱을 90 엔드벨과함께코넥터에연결사용. 절연체패킹및부싱이포함되어전선방수가가능한구조로되어있음. YHB08F(VG9524 Style) and options. YHB08F - excludes insulator packing and bushings. Uses cable clamp and rubber bushings with 90* end bell. Includes insulator packing and bushings. Wire is water resistant. 접점유형 클림핑타입접점 보호피막은도금 Contact Type Clamping type contact Protection coating Silver plating YHB08**-10SL-**-*** YHB08**-20-**-*** YHB08**-22-**-*** YHB08**-24-**-*** YHB08**-28-**-*** YHB08**-2-**-*** YHB08**-6-**-*** Metric Contact size WG VG9524 pplicable wire size Metric ( mm2 ) WG S 16S VG9524P15S / / / VG9524P / / / VG9524P / / VG9524P VG9524P / VG9524P VG9524P YONHB PRCISION CO., LT. YONHB PRCISION CO., LT.

17 VG/YH-B, YHB Contact VG/YH-B, YHB Contact Socket Contacts (WG, Metric) Pin Contacts 접점유형클림핑타입접점보호피막은도금 size 접점유형납땜타입접점보호피막은도금 Contact Type Clamping type contact Protection coating Silver plating Contact Type Soldering type contact Protection coating Silver plating pplication size 16S,16,12,12L size Metric Contact size WG VG9524 pplicable wire size Metric ( mm2 ) WG S 16S VG9524S15S / Contact size 5 4 pplication size / / VG9524S / / / VG9524S / S L / Socket Contacts 접점유형 납땜타입접점 60 VG9524S 보호피막 100 VG9524S / 은도금 Contact Type Soldering type contact pplication size 16S,16, Protection coating Silver plating 160 VG9524S pplication size VG9524S Contact size S YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 5

18 ccessories ccessories Metal ust Caps With Chain YH9524KB Style YH9524KR Style Cable Clamps VG9524 Style KK YH9524KB10SL YH9524KR10SL YH9524KB14S YH9524KR14S YH9524KB16S YH9524KR16S YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR YH9524KB YH9524KR Shell size (Class : 2B) 10SL YH /8-24UNF 14S YH /4-20UNF 16S & 16 YH /8-20UNF 18 YH UNF 20 & 22 YH /16-18UNF 24 & 28 YH /16-18UNF 2 YH /4-18UNS 6 YH UNS ummy Receptacle VG9524 Style BO Rubber Bushing YH057 케이블클램프와함께사용. 패널전면에장착. 패널장착홀은관통구멍임. used with YH057 cable clamp. Installed in front of the panel. Panel mounting hole is a through-hole. Shell size SL YH10510SL-B S YH10514S-B S YH10516S-B YH10516-B YH10518-B YH10520-B YH10522-B YH10524-B YH10528-B YH1052-B YH1056-B L L YH YH9524KT10SL YH YH9524KT14S YH YH9524KT24& YH YH9524KT YH YH YH YH YONHB PRCISION CO., LT. YONHB PRCISION CO., LT. 7

19 ccessories ngular O-Ring for sealing 플러그용 For plugs Size 10SL S S Sealing plug 코넥터 후면에 와이어와 접점을 연결하지 않은 홀 부분을 밀봉할 목적으로 사용. Used for sealing holes that are not connected with wires at the back of connector. Size Contact size 20 YH9524B Red 16 YH9524B16 15S/15 16S/ Blue Yellow Metric 8 Color WG 12 YH9524B YH9524B08 60/ White 4 YH9524B Green 0 YH9524B Black YONHB PRCISION CO., LT.