KOI Series KOI 유량계는여러가지시험장비및반도체장비등판넬설치용으로사용됩니다. 이유량계는액체나기체에사용할수있으며부식성액체나기체에도재질 (TEFLON or PVC) 을선택할수있습니다. 적용대상에따라유량을조정할수있는니들밸브부착형 ( 기본사양 ) 등이있으며압력의변화에도적용할수있는정유량변도부착할수있습니다. These panel-mounting flow meters are used in various testing equipments and semi conductors. They are usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids or gases. They have needle valve attached type which can adjust flow rate according to application and types which can be applied to pressure change. Model Code KOI Code. Description. A 130mm ( C to C ) C 200mm ( C to C ) Connection Length D 240mm ( C to C ) E 280mm ( C to C ) 1 SS304 2 SS316 Material P PVC T PTFE (Without Valve) TV Option PTFE (With Valve) E1 1 SPDT Contact (Fiber Sensor) E2 2 SPDT Contact (Fiber Sensor) Option R1 1 SPDT Contact (Reed S/W) R2 2 SPDT Contact (Reed S/W) F Flange Connection KOI 접점타입의실제사진 (KOI with dry contact) Reed S/W Fiber Sensor - 1 -
KOI-A-1 Series KOI 유량계는여러가지시험장비및반도체장비등판넬설치용으로사용됩니다. 이유량계는액체나기체에사용할수있으며부식성액체나기체에도재질 (TEFLON or PVC) 을선택할수있습니다. 적용대상에따라유량을조정할수있는니들밸브부착형 ( 기본사양 ) 등이있으며압력의변화에도적용할수있는정유량변도부착할수있습니다. ( Connection 거리가 130 mm입니다.) KOI-A-1 These panel-mounting flow meters are used in various testing equipments and semi conductors. They are usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids or gases. They have needle valve attached type which can adjust flow rate according to application and types which can be applied to pressure change. (connection to connection : 130mm) 구조 (Structure) 및치수 (Dimension) No. Title. Material. 1 Main Plate AL.C 2 Bottom Block AL.C 3 Top Block AL.C 4 Bottom Body SS304/316/316L 5 Top Body SS304/316/316L 6 Ring B.S / SS304 7 Shaft SS304/316/316L 8 Nipple SS304/316/316L 9 Double Nut Brass 10 Needle Valve SS304/316/316L 11 Cover Acryl - 2 -
유량범위 (Flow Rate Table) Alarm (PAU) Alarm (Reed Switch) AIR(1atm.0 ) Water AIR(1atm.0 ) Alarm setting range Water Alarm settingrange 4.0~20 NmL/min 6.0~30 NmL/min 10~50 NmL/min 10~100 NmL/min 20~200 NmL/min 30~300 NmL/min 50~500 NmL/min 5.0~50 ml/min 50~500 NmL/min 100~400 NmL/min 5.0~50 ml/min 10~40 ml/min 0.1~1.0 NmL/min 10~100 ml/min 0.1~1.0 NL/min 0.2~0.8 NL/min 10~100 ml/min 20~80 ml/min 0.2~2.0 NL/min 20~200 ml/min 0.2~2.0 NL/min 0.4~1.6 NL/min 20~200 ml/min 40~160 ml/min 0.3~3.0 NL/min 30~300 ml/min 0.3~3.0 NL/min 0.6~2.4 NL/min 30~300 ml/min 60~240 ml/min 0.5~5.0 NL/min 50~500 ml/min 0.5~5.0 NL/min 0.1~4.0 NL/min 50~500 ml/min 100~400 ml/min 1.0~10 NL/min 1.0~10 NL/min 2.0~8.0 NL/min 2.0~20 NL/min 0.1~1.0 L/min 4.0~20 NL/min 4.0~16 NL/min 3.0~30 NL/min 6.0~30 NL/min 6.0~24 NL/min 0.1~1.0 L/min 0.2~0.8 L/min 0.3~1.5 L/min 5.0~50 NL/min 0.4~2 L/min 10~50 NL/min 10~40 NL/min Standard Specification Measuring Object Measuring Range Air Water Min. 4~20 NmL/min. Max. 5~50 NL/min. Air at 0, 1 atm Min. 5~50 ml/min. Max. 0.15~1.5 L/min. Liquids and gas Range ability 10:1 10:2 occasionally Accuracy ±2% of F.S GAS (±2.5% of F.S) Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) When packing PTFE is used, Max. Oper. Press. is 5 kgf/ cm2g Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temperature is 80 Material ST'D Option (SS304/SS316/SS316L) Body SS304 (ST'D) SS316, SS316L Tapered tube Pyrex glass Packing NBR (max. 80 ) Support Cover Std. Connection Opt. Mounting Std. Opt. Approx. weight (ST'D type) Aluminium Acryl Rc1/4" Rc1/8", NPT1/4", NPT3/8" Lock-nut mounting onto panel front Bezel installation, Panel-rear installation, Stand provided etc. 0.5 kg Viton (max. 120 ) PTFE (max. 120 ) EPDM (max. 80 ) - 3 -
KOI-C-1 Series KOI 유량계는여러가지시험장비및반도체장비등에패널설치용으로사용됩니다. 이유량계는액체나기체에사용할수있으며부식성액체나기체에도재질 (TEFLON or PVC) 을선택할수있습니다. 적용대상에따라유량을조정할수있는니들밸브부착형등이있으며압력의변화에도적용할수있는정유량변도부착할수있습니다. ( Connection 거리가 200 mm입니다.) KOI-C-1 These panel-mounting flow meters are used in various testing equipments and semi conductors. They are usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids or gases. They have needle valve attached type which can adjust flow rate according to application and types which can be applied to pressure change. (connection to connection : 200mm) 구조 (Structure) 및치수 (Dimension) No. Title. Material. 1 Main Plate AL.C 2 Bottom Block AL.C 3 Top Block AL.C 4 Bottom Body SS304/316/316L/PTFE 5 Top Body SS304/316/316L/PTFE 6 Ring B.S/SS304 7 Shaft SS304/316/316L/PTFE 8 Nipple SS304/316/316L/PTFE 9 Double Nut Brass 10 Needle Valve SS304/316/316L/PTFE 11 Cover Acryl - 4 -
유량범위 (Flow Rate Table) Alarm (PAU) Alarm (Reed Switch) AIR(1atm.0 ) Water AIR(1atm.0 ) Alarm setting range Water Alarm setting range 5.0~50 NmL/min 10~100 NmL/min 20~200 NmL/min 30~300 NmL/min 50~500 NmL/min - 50~500 NmL/min 100~400 NmL/min - - 0.1~1.0 NmL/min 10~100 ml/min 0.1~1.0 NL/min 0.2~0.8 NL/min 10~100 ml/min 20~80 ml/min 0.2~2.0 NL/min 20~200 ml/min 0.2~2.0 NL/min 0.4~1.6 NL/min 20~200 ml/min 40~160 ml/min 0.3~3.0 NL/min 30~300 ml/min 0.3~3.0 NL/min 0.6~2.4 NL/min 30~300 ml/min 60~240 ml/min 0.5~5.0 NL/min 50~500 ml/min 0.5~5.0 NL/min 0.1~4.0 NL/min 50~500 ml/min 100~400 ml/min 1.0~10 NL/min 1.0~10 NL/min 2.0~8.0 NL/min 2.0~20 NL/min 0.1~1.0 L/min 2.0~20 NL/min 4.0~16 NL/min 0.1~1.0 L/min 0.2~0.8 L/min 3.0~30 NL/min 3.0~30 NL/min 6.0~24 NL/min 5.0~50 NL/min 0.3~3 L/min 6.0~60 NL/min - 5.0~50 NL/min 10~50 NL/min 0.3~3.0 L/min 0.5~2.5 L/min Standard Specification Measuring Object Liquids and gas Min. 5~50 NmL/min. Air Measuring Max. 5~50 NL/min. Air at 0, 1atm Range Min. 10~100 ml/min. Water Max. 0.3~3 L/min. Range ability 10:1 10:2 occasionally Accuracy ±2% of F.S GAS (±2.5% of F.S) Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temperature is 80 Material SS304 (ST'D) Option (SS316/SS316L/TEFLON) Body SS304 SS316/SS316L/TEFLON Tapered tube Pyrex glass Packing NBR (max. 80 ) Viton (max. 120 ) Support Aluminium Cover Acryl Connection Mounting Std. Opt. Std. Opt. Approx. weight (ST'D type) Rc1/4" Rc3/8", NPT1/4", NPT1/2" Lock-nut mounting onto panel front Bezel installation, Panel-rear installation, Stand provided etc. 0.8 kg - 5 -
KOI-D-1 Series KOI 유량계는여러가지시험장비및반도체장비등에패널설치용으로사용됩니다. 이유량계는액체나기체에사용할수있으며부식성액체나기체에도재질 (TEFLON or PVC) 을선택할수있습니다. 적용대상에따라유량을조정할수있는니들밸브부착형등이있으며압력의변화에도적용할수있는정유량변도부착할수있습니다. (Connection 거리가 240mm입니다 ) KOI-D-1 These panel-mounting flow meters are used in various testing equipments and semi conductors. They are usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids or gases. They have needle valve attached type which can adjust flow rate according to application and types which can be applied to pressure change. (connection to connection : 240mm) 구조 (Structure) 및치수 (Dimension) No. Title. Material. 1 Top Block SS304/316/316L 2 Bottom Block SS304/316/316L 3 Plate AL.C 4 Support Bar AL.C 5 Guide Bar SS304/316/316L 6 Screw Nut Brass 7 Nut Set SS304/316/316L 8 Glass Pyrex 9 Cover Acryl 10 Needle Valve SS304/316-6 -
유량범위 (Flow Rate Table) AIR ( 1atm, 0 ) Water 5~50 NL/min 0.2 ~ 2 L/min 8~80 NL/min 0.4 ~ 4 L/min 10~100 NL/min 1 ~ 10 L/min 20~200 NL/min 25~250 NL/min 1.5 ~ 15 L/min Standard Specification Measuring Object Liquids and gas Min. 5~50 NL/min. Air Measuring Max. 25~250 NL/min. Air at 0, 1atm Range Min. 0.2~2 L/min. Water Max. 1.5~15 L/min. Range ability 10:1 Option 6:1 Accuracy ±2% of F.S GAS (±2.5% of F.S) Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temperature is 80 Material ST'D Option (Specify by model code) Body SUS304 (ST'D) SUS316, SS316L, Teflon, PVC Tapered tube Pyrex glass Packing NBR (max. 80 ) Viton (max. 120 ) PTFE (max. 120 ) Support AL.C PVC,PTFE Cover Acryl Std. Rc1/2" Connection Opt. 1/2" NPT, JIS 10K FF etc. Mounting Std. Opt. Lock-nut mounting onto panel front Flange pipe mounting, Stand provided etc. Approx. weight (ST'D type) 1.5 kg - 7 -
KOI-E-1 Series KOI 유량계는여러가지시험장비및반도체장비등에패널설치용으로사용됩니다. 이유량계는액체나기체에사용할수있으며부식성액체나기체에도재질을선택할수있습니다. 적용대상에따라유량을조정할수있는니들밸브부착형등이있으며압력의변화에도적용할수있는정유량변유량계도있습니다. (Connection 거리가 280 mm입니다 ) KOI-E-1 These panel-mounting flow meters are used in various testing equipments and semi conductors. They are usable for both liquids and gases. User have an option to pick suitable material for use with corrosive liquids or gases. They have needle valve attached type which can adjust flow rate according to application and types which can be applied to pressure change. (connection to connection : 280mm) 구조 (Structure) 및치수 (Dimension) No. Title. Material. 1 Top Block SS304/316/316L 2 Bottom Block SS304/316/316L 3 Plate AL.C 4 Support Bar SUS304 5 Guide Bar SS304/316/316L 6 Screw Nut None. 7 Cap SS304/316/316L 8 Nut Set Brass 9 Glass Pyrex 10 Cover Acryl 11 Needle Valve SS304/316/316L - 8 -
유량범위 (Flow Rate Table) AIR(1atm.0 ) Water AIR(1atm.0 ) Alarm setting range Water Alarm setting range 5.0~50 NL/min 0.2~2.0 L/min 5.0~50 NL/min 10~40 NL/min 10~100 NL/min 0.3~3.0 L/min 10~100 NL/min 20~80 NL/min 0.3~3.0 L/min 0.6~2.4 L/min 20~200 NL/min 0.5~5.0 L/min 20~200 NL/min 40~160 NL/min 0.5~5.0 L/min 1.0~4.0 L/min 30~300 NL/min 1.0~10 L/min 30~300 NL/min 60~240 NL/min 1.0~10 L/min 2.0~8.0 L/min 40~400 NL/min 1.5~15 L/min 40~400 NL/min 80~320 NL/min 1.5~15 L/min 3.0~12 L/min 50~500 NL/min 2.0~20 L/min 50~500 NL/min 100~400 NL/min 2.0~20 L/min 4.0~16 L/min 60~600 NL/min 3.0~30 L/min 60~600 NL/min 120~480 NL/min 3~30 L/min 6.0~24 L/min Standard Specification Measuring Object Liquids and gas Min. 5 ~50 NL/min. Air Measuring Max. 60~600 NL/min. Air at 0, 1atm Range Min. 0.2~2.0 L/min. Water Max. 3.0~30 L/min. Range ability 10:1 Accuracy ±3% F/S Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temp is 80 Material Std. Option (SS316,SS316L) Body SUS304 (STD') SUS316, PVC Tapered tube Pyrex glass Packing NBR (max 80 ) Viton (max 120 ) EPDM (max 80 ) Support SUS304 Cover Acyle Connection Std. Opt. PT3/8", NPT3/8" NPT1/2", PT 3/4" PT1" JIS10KFF etc. Std. Mounting Opt. Weight (std. type) Lock-nut mount onto panel front Bezel installation, Panel-rear installation Stand provided Flange pipe tube installation 4.0 kg - 9 -
KOI-JW Series KOI-JW 유량계는판넬설치및배관내취부가가능하며협소한공간에서도유량계을설치할수있습니다. 콤팩트형으로써소유량에서대유량까지측정범위가넓으므로반도체장비등에사용적합하며, Teflon 이나 PVC 제작되어초순수, 화학약품, 부식성이있는액체, 기체등에넓게사용할수있습니다. (Connection 거리가 150 mm입니다.) KOI-JW-S-R1 KOI-JW-TV KOI-JW series can install in panel or process pipe. in additional it doesn t require a large space for installation. it has wide flow range from low flow to large one. goods that is made with teflon, PVC are suitable for ultrapure-water, chemical field, corrosive liquids or gases. (Connection to connection : 150 & 160mm) Model Code KOI-JW Code. Description. S SUS304, SUS316 Material Connection Option P PVC TV PTFE (With Valve) T PTFE (Without Valve) 1 PT 1/2 150mm 2 PT 3/4 150mm 3 PT 1 160mm R1 1 SPDT Alarm (Reed S/W) R2 2 SPDT Alarm (Reed S/W) 구조 (Structure) 및치수 (Dimension) PT 1/2" PT 3/4" PT 1" L 150 160 L2 190 200 Title. Body Support Bar Float Material. SUS, TEFLON or PVC SUS SUS, TEFLON or PVC C 30 35 Needle Valve SUS, TEFLON or PVC - 10 -
Standard Specification Measuring Object Liquids and gas Min. 5 ~50 NL/min. Air Measuring Max. 80~800 NL/min. Air at 0, 1atm Range Min. 0.2~2.0 L/min. Water Max. 8~80 L/min. Range ability 10:1 Accuracy ±2% of F.S Gas (±2.5% of F.S) Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temperature is 80 Material ST'D Option (SS316,SS316L) Body SUS304 (ST'D) SUS316, PTFE, PVC, ETC. Tapered tube Pyrex glass Packing NBR (max. 80 ) Viton (max. 120 ) EPDM (max. 80 ) Support Cover Std. Connection Opt. SUS304 Acyle PT3/8", NPT3/8" NPT1/2", PT 3/4" PT1" JIS 10K FF etc. Mounting Std. Lock-nut mounting onto panel front Bezel installation, Panel-rear installation Weight (ST'D type) Opt. Stand provided Flange pipe tube installation 4.0 kg 유량범위 (Flow Rate Table) AIR(1atm.0 ) Water (PTFE) Water (SUS) Alarm setting range 5~50 NL/min 1.0~10 L/min 1.2~12 L/min 2.4~10 L/min 8~80 NL/min 1.5~15 L/min 1.5~15 L/min 3.0~12 L/min 10~100 NL/min 2.0~20 L/min 2.0~20 L/min 4.0~16 L/min 20~200 NL/min 3.0~30 L/min 3.0~30 L/min 6.0~24 L/min 30~300 NL/min 4.0~40 L/min 4.0~40 L/min 8.0~32 L/min 40~400 NL/min 4.5~45 L/min 4.5~45 L/min 9.0~36 L/min 60~600 NL/min 5.0~50 L/min 5.0~50 L/min 10~40 L/min 80~800 NL/min 6.0~60 L/min 8.0~80 L/min 28~68 L/min - 11 -
KV Series KVS-B KVS-GV KVF-B KVS-B-R1 KV 유량계는유량계부착및배관에있어서여러종류의다양한제작사양으로사용자의요구를충족할수있는형식입니다. 접속방향, 방법또한부품의교환조립등의호환성을고려해서설계했으며정도, 안정성모두우수한유량계입니다. KV series that is made by various specification can satisfy on customer's needs. that is superior for accuracy, stability, safety. Model Code KV Code. Description. Connection S F Screw Flange Material Size B C P T SUS304 SUS316 P.V.C PTFE 8 PT(1/4") Fe (Application on B.C.P.T TYPE) 10/15 PT 3/8" or 1/2" Fe 20 PT 3/4" Fe 25 PT 1" Fe 40 PT 1-1/2" Fe 50/65 PT 2" Fe Option R1 GV 1SPDT Alarm (Reed S/W) Valve (32A 이상 Gate Valve, 25A 이하 Needle Valve) - 12 -
구조 (Structure) 및치수 (Dimension) NO Title. Mat'l Size L(mm) Valve 삽입 L(mm) 1 Body SS304, SS316, PVC, PTFE 2 Cover AL, SS304 10A 230 (70) 300 15A 280 (75) 355 20A 320 (80) 400 3 Glass Pyrex 25A 380 (85) 465 SS304, SS316, 4 Float AL, Acetal 40A 420 - KVS-B- 5 Union Cap SS304, AL 50A 450 - NO Title. Mat'l Size L(mm) 1 Bottom Body SS304, SS316, PVC, PTFE 10A 280 2 Cover AL, SS304 15A 300 3 Top Body SS304, SS316, PVC, PTFE 20A 340 4 Union Cap SS304, AL 25A 380 5 Float SS304, SS316, AL, Acetal 40A 420 KVF-B- 6 Tube Pyrex 50A 450-13 -
유량범위 (Flow Rate Table) Size. Standard (L/min) 10A 0.15 ~ 1.5 15A 0.35 ~ 3.5 20A 0.8 ~ 8.0 25A 2.0 ~ 20 32A 3.0 ~ 30 40A 5.0 ~ 50 50A 8.0 ~ 80 65A 10 ~ 150 H2O Flow Rate (L/min) AIR Flow Rate (NL/min) Extended Flow (L/min) Standard (NL/min) Extended Flow (NL/min) 0.2 ~ 2.0 3.0 ~ 30 2.0 ~ 25 0.2 ~ 2.5 3.0 ~ 35 0.3 ~ 3.0 5.0 ~ 50 0.4 ~ 4.0 6.0 ~ 60 4.0 ~ 40 0.5 ~ 5.0 6.0 ~ 70 0.6 ~ 6.0 20 ~ 200 0.6 ~ 7.0 10 ~ 100 2.0 ~ 20 10 ~ 120 1.0 ~ 10 8.0 ~ 80 10 ~ 150 1.0 ~ 12 20 ~ 200 1.0 ~ 15 40 ~ 400 1.0 ~ 17 20 ~ 290 4.0 ~ 40 20 ~ 250 50 ~ 500 2.0 ~ 27 30 ~ 350 5.0 ~ 50 40 ~ 400 3.0 ~ 35 30 ~ 300 80 ~ 800 4.0 ~ 40 60 ~ 600 8.0 ~ 80 60 ~ 700 6.0 ~ 60 50 ~ 500 150 ~ 1500 6.0 ~ 70 100 ~ 1000 15 ~ 150 100 ~ 1200 80 ~ 800 10 ~ 100 200 ~ 2500 10 ~ 120 200 ~ 2000 100~ 1500 20 ~ 250 400 ~ 4000 20 ~ 200 40 ~ 400 표준사양 (Standard Specification) Measuring Object Liquid and gas Range ability 10:1 Accuracy ±2% of F.S GAS ± 2.5 % F.S Max. Oper. Press. 10 kgf/ cm2g (0.98MPaG) Max. Oper. Temp. 120 Standard products have the packing materials made of NBR, so Max. Temperature is 80 Material ST'D Option ( SS316/SS316L/TEFLON/PVC) Body SUS304 SUS316, TEFLON, PVC Tapered tube Pyrex glass Packing NBR (max. 80 ) Viton (max. 120 ) Support SS304 Connection Std. PT 1/4" Opt. PT1/8",3/8",1/2", NPT, JIS10KFF etc. Std. Pipe mounting Mounting Opt. Panel mounting by attached metal fitting or Flange mounting etc. General quantity (ST'D type) 1.0 kg (1/2") - 14 -
Purge set (Flow Meter With Constant Flow Valve) 정유량변과미소유량측정용 Flow Meter를조합한것으로, 압력변동이있어도내부의다이아프램이항상일정한유량을공급할수있어서정확한 Level 측정및비중측정, 정유량설정등을할수있습니다. When working pressure change, inside diaphragm and needle valve operates in order to always keeping a fixed flow rate for exact measurement of constant flow setting, level, density. KP Series 사양 (Specification) 1. 정도 (Accuracy) : ±2% of F.S 2. 최고내압한도 (Max. Operating Pressure) : Max. 10kgf/cm²G (10kgf/cm²G Option) 3. 최고내열한도 (Max. Operating Temperature) : Max. 120 C (300 C이상 Option) 4. 사용차압범위 (Operating Differential Pressure Range) : 0.5~3kgf/cm²G, 0.3~3kgf/cm²G, 0.6~4kgf/cm²G, 1~5kgf/cm²G 작동원리 (Operation Principle) 입구 (1차) 변동압력제어방식에서일정하지않은압력의유체는입구로부터정유량밸브의하단 chamber까지유입됩니다. 그리고상단의 chamber에 2차압력이전달됩니다. 이때상, 하단의 chamber사이에서발생되는차압은스프링과다이아프램의역할에의해항상일정하게됩니다. 니들밸브에의해교차되는차압은항상일정하게유지되며유량은밸브의조절에의해서만비례합니다. 출구 (2차) 변동압력제어방식에서는반대의구조로출구의압력이변하여도역시유량은항상일정하게유지됩니다. In the PRIMARY(INLET) PRESSURE VARIATION CONTROL TYPE, the fluid, of which inlet pressure varies, is introduced from IN to the lower chamber of the C series Constant Flow Valve. The load pressure (Secondary pressure) is connected to the upper chamber. The differential pressure between the lower chamber and the upper chamber is always constant thanks to the function of the Spring and the Diaphragm. The differential pressure across the needle valve is kept always constant and the flow rate of the fluid is proportional only to the opening of needle valve. The opposite action is taken for SECONDARY (OUTLET) PRESSURE VARIATION CONTROL TYPE and the flow rate is kept also constant even when the load pressure changes. - 15 -
적용사례 SUPPLY PRESSURE VARIATION LEVEL MEASUREMENT 위그림에나타나듯이하나의메인에서각각분기되는탱크의하부로토출되는압력은액체레벨에의해변화경우분기관중정지된곳의영향으로공급압력은변화하며일정한공기유량을필요로합니다. 그러므로출구합니다. 이때입구변동압력제어방식은퍼징된유량변동압력제어방식은이런경우에적합하며압력측정을유지하는데적합니다. 을위해압력계대신차압발신기가종종설치됩니다. As shown above, in case one large supply line branches Liquid level in tanks is measured by the Back-pressure at into several lines and the supply pressure changes because the edge of purging pipe. The outlet pressure at the tank of stoppage of some branches. Primary Pressure Variation bottom changes depending on the liquid level, and type Purge set will be suitable in keeping the purging constant bubbling is required. Thus, Secondary Pressure volume of fluid. Variation type purge set is used for this application. A Dp transmitter is often connected to pressure line instead of pressure gauge for remote transmission. Recommended Model of Purgeset : KP2-KOI Series Recommended Model of Purgeset : KP3-KOI-PN Series PURGING FOR ORIFICE PLATE APPLICATION DENSITY MEASUREMENT 차압방식에의한측정중고형물질이도압관에유입되어측정을방해하지못하도록하기위한이중 Purge 의예. 위그림은탱크내부액체의지속적인밀도측정을위해적용된공기 Purge 방식을보여주고있다. For the measurement of flow rate of corrosive liquids For continuous measurement of density of liquid in tanks, and/or liquids with solids by orifice plate, an equal Air purging system is used as shown above. pressure purging both to High and Low pressure parts so as not to introduce liquid and/or solids into Dp by pass line. Dual mount type purge set used. Recommended Model of Purgeset : KP3-KOI-PN Series Recommended Model of Purgeset : KP3-KOI-PN Series - 16 -
KP1 Series ( Purge set ) Model Code KP1-KOI Code. Description. Connection Length Material Option A C 130mm 200mm 1 SUS304 2 SUS316 X Special IN Inlet Control OUT Outlet Control Inlet pressure variation control type Outlet pressure variation control type KP1-KOI-A-1-IN KP1-KOI-A-1-OUT KP1-KOI-C-1-IN KP1-KOI-C-1-OUT - 17 -
표준사양 (Standard Specification) Model Identification : IN Inlet pressure variation control type OUT Outlet pressure variation control type Available Flow Ranges : Gases : Max. 4L/min (nor) *1 Max. Oper. Press. : 1.0MPa (10kg/cm²G) Temp. : Max. 120 C Min. Required DP : 0.03MPa (0.3kg/cm²G) Max. Controllable DP : 0.3MPa (3kg/cm²) Control Accuracy : ±3% of F.S *1 : Air, 0 C, 1atm Material Construction Material Part Name Standard Option Body SUS304 Aluminum, SUS316 Diaphragm CR VITON Spring SUS304 SUS316 Seal NBR VITON, PTFE Standard Process Connection : Rc1/4" Thread Constant valve Drawing The left figure show Type KPO-KOI-IN which is the primary pressure fluctuation type. For Type KP1-KOI-OUT of the secondary pressure fluctuation type, the direction of "IN" and "OUT" gets reverse, and the height shall be 45mm instead of 45mm. 왼쪽그림은입구변동압력제어방식의 KP1-KOI-IN 을보여주고있습니다. 출구변동압력제어방식의 KP1-KOI-OUT은입구와출구의방향이반대로바뀌게됩니다. 그리고입구의센터에서출구의센터까지길이는 KP1-KOI- IN은 45 mm, KP1-KOI-OUT는 45 mm 입니다. - 18 -
KP2 Series (Purge set) Model Code KP2 Code. Description. Indicator KOI KMS Glass Tube Indicator Metal Tube Indicator Connection Length Material A C D MF 130mm of KOI Series 200mm of KOI Series 240mm of KOI Series 180mm of KMS Series 1 SUS304 2 SUS316 X Special Option IN OUT Inlet Control Outlet Control 표준사양 (Standard Specification) Model Identification : Inlet pressure variation control type Outlet pressure variation control type Available Flow Ranges : Liquids : Max. 2L/min *1 Gases : Max. 50L/min (nor) *2 Max. Oper. Press. : 1.0 MPa (10kg/cm²G) Temp. : Max. 120 C Min. Required DP : 0.06MPa (0.6kg/cm²G) Max. Controllable DP : 0.4MPa (4kg/cm²) Control Accuracy : ±3% of F.S *1 : Water (Density 1.0g/cm², Viscosity 1.0cP) *2 : Air, 0 C, 1atm Material Construction Part Name Material Standard Option Body SCS14 - Diaphragm CR VITON Spring SUS304 SUS316 Seal NBR VITON Standard Process Connection : PT 1/4" Thread - 19 -
구조 (Structure) 및치수 (Dimension) Inlet Pressure Variation Control Type (Also used for Outlet Pressure Variation in liquid applications) Possible Scale Ranges as Purge Set Possible Scale Ranges as Purge Set KP2-KOI-A-1-IN Water Min. 0.003~0.03L/min. KP2-KOI-C-1-IN Water Min. 0.007~0.07L/min. Max. 0.4~2 L/min. Max. 0.2~2 L/min. Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0 C, 1atm) Max. 5~50 NL/min. (0 C, 1atm) Max. 5~50 NL/min. Inlet Pressure Variation Control Type (Also used for Outlet Pressure Variation in liquid applications) Possible Scale Ranges as Purge Set Possible Scale Ranges as Purge Set KP2-KOI-D-1-IN Water Min. 0.003~0.03L/min. KP2-KMS-MF-1-IN Water Min. 0.007~0.07L/min. Max. 0.4~2 L/min. Max. 0.2~2 L/min. Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0 C, 1atm) Max. 5~50 NL/min. (0 C, 1atm) Max. 5~50 NL/min. - 20 -
Outlet Pressure Variation Control Type KP2-KOI-A-1-OUT Possible Scale Ranges as Purge Set Possible Scale Ranges as Purge Set KP2-KOI-C-1-OUT Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0 C, 1atm) Max. 5~50 NL/min. (0 C, 1atm) Max. 5~50 NL/min. Outlet Pressure Variation Control Type KP2-KOI-D-1-OUT Possible Scale Ranges as Purge Set Possible Scale Ranges as Purge Set KP2-KMS-MF-1-OUT Air Min. 0.1~1 NL/min. Air Min. 0.1~1 NL/min. (0 C, 1atm) Max. 5~50 NL/min. (0 C, 1atm) Max. 5~50 NL/min. - 21 -
KP3 Series (Purge Set) Model Code KP3 Code. Description. Indicator KOI KMS Glass Tube Indicator Metal Tube Indicator Connection Length Material A C MF 130mm of KOI Series 200mm of KOI Series 180mm of KMS Series 1 SUS304 2 SUS316 X Special Option S D Single Type Dual Type One Purge Block Diagram of System Dimension This is dimension of Wall or panel mounting type. U-bolt fixture is provided for U-bolt installation type. - 22 -
표준사양 (Standard Specification) Type : Secondary pressure variation control type (Single loop) Supply air : Max. 0.99MPaG (9.9kg/cm²G) Primary press. : To be adjusted to 0.06MPa (0.6kg/cm²G) higher than the maximum of secondary press. Secondary press. : 0.06MPa ~ (0.6kg/cm²G ~ ) Possible scale range : Min. 0.1 ~ 1 NL/min. Max. 5 ~ 50 NL/min. Indication accuracy : ±2.5% of F.S. Control accuracy : ±3% of F.S. Process connection : PT 1/4" thread Other threads on request Installation : Std. Wall/panel mounting Opt. U bolt installation type Dual Purge Block Diagram of System Dimension This is dimension of Wall or panel mounting type. U-bolt fixture is provided for U-bolt installation type. 표준사양 (Standard Specification) Type Supply air Primary press. : Secondary pressure variation control type (Dual loop) : Max. 0.99MPa (9.9kg/cm²G) : To be adjusted to 0.06MPa (0.6kg/cm²G) higher than the maximum of secondary press. Secondary press. : 0.06MPa ~ (0.6kg/cm²G ~ ) Possible scale range : Min. 0.1 ~ 1 NL/min. Max. 5 ~ 50 NL/min. Indication accuracy : ±2.5% of F.S. Control accuracy : ±3% of F.S. Process connection : PT 1/4" thread Other threads on request Installation : Std. Wall/panel mounting Opt. U bolt installation type - 23 -