DVC6200 Fisher FIELDVUE DVC6200 HC, AD, PD, ODV 1309 2 7 1 3 DD 7 1 1... 3,,... 3... 3... 3... 3... 5... 5... 8 2... 9... 9 HART... 9... 9... 11... 12... 12 Rosemount 333 HART Tri-Loop HART-... 13 3... 15... 15... 15... 16... 16... 16... 16... 16... 17... 17... 17... 17... 18... 18 W9713 /... 18 /... 18... 19... 19... 20... 20... 21... 23... 24... 24... 27 /... 27... 28... 30... 36... 36... 36 HART... 37... 37... 38 HART 5 / HART 7... 38 www.fisher.com
DVC6200 () 4... 39... 39... 40... 40... 41... 42... 43... 43... 44... 45... 45... 46 PST... 47 5,... 48... 48 1... 48... 48... 49... 49... 49... 49... 52... 54... 54 (ODV)... 54... 56 6... 57... 58... 58... 58... 59... 59... 60... 61 I/P... 61 (PWB)... 63... 65,... 65... 66... 66... 67... 67... 67... 68 DVC6200... 70 7... 71... 71... 71 PWB... 71... 73... 73... 73... 73 I/P... 73... 73... 74... 74,... 74 DVC6215... 74 HART... 74 A... 81 HART... 81 DVC6200... 81 B... 85... 95... 101 2
1,, DVC6200,, DVC6200 (D103556X012). QR. www.fisher.com. DVC6200 (D103556X012).,,,.. Fisher ValveLink ValveLink Mobile,. ValveLink ValveLink.,,,, DVC6200,.,,..., : > > (2-1-1) B. DVC6200 ( 1 1 1 2) -. HART DVC6200.., ( ). 3
1 1. Fisher FIELDVUE DVC6200 1 2. Fisher GX FIELDVUE DVC6200 W9616 X1182-1 ValveLink AMS Suite: DVC6200.,,,... 1 1. HART. DVC6200 -. 1 1. (2) HC AD PD ODV x x X X x x x x x x x x x x x x, x x x ( ) x x x (3) x x x - x x x x x x X X X X / (1) 1. Fisher D351146X012. 2 HC = HART Communicating, AD = Advanced Diagnostics, PD = Performance Diagnostics, ODV = Optimized Digital Valve. 3 ValveLink. X 4
1 2.. DVC6200 1 2.. DVC6200.. Bulletin 62.1:DVC2000 - Fisher FIELDVUE DVC2000 (D103415X012) Bulletin 62.1:DVC2000 - Fisher FIELDVUE DVC2000 (D103543X012) Fisher FIELDVUE DVC6200 (D103556X012) FIELDVUE (D103262X012) Smart HART (HIM) FIELDVUE (D103263X012) Smart Wireless THUM HART (HIM) FIELDVUE (D103469X012) HART (D103265X012) HART - Fisher FIELDVUE DVC6200 (D103639X012) FIELDVUE HART Tri Loop HART to Analog (D103267X012) Lock in Last (D103261X012) Fisher HF340 (D102796X012) AMS Trex Device Communicator User Guide ValveLink Fisher.com. 5
1 2. DVC6200 DVC6215 : Fisher 657/667 GX Fisher 2 wall mounting() DVC6205 DVC6200 DVC6215 IEC 60534 6-1, IEC 60534-6-2, VDI/VDE 3845 NAMUR. HART 5 HART 7 -to- : 4-20mA DC,, 9.5VDC, HART 10VDC : 4.0mA : 3.5mA : 30VDC : 10mA 11~30VDC (1) : 0.3bar(5psig) : 10.0bar(145psig) :. ISA 7.0.01 40. 5. 1ppm (w/w) (v/v).. ISO 8573-1 : 7 : 3 : 3 10 C, : 0.4bar(6psig) : 9.5bar(140psig) :, (2)(3) 1.4bar(20psig) : 0.38 normal m 3 /hr(14scfh) 5.5bar(80psig) : 1.3 normal m 3 /hr(49scfh) 1.4bar(20psig) : 0.056 normal m 3 /hr(2.1scfh) 5.5bar(80psig) : 0.184 normal m 3 /hr(6.9scfh) (2)(3) 1.4bar(20psig) : 10.0 normal m 3 /hr(375scfh) 5.5bar(80psig) : 29.5 normal m 3 /hr(1100scfh) (1)(4) -40~85 C (-40~185 F) -52~85 C (-62~185 F) - (fluorosilicone elastomers) -52~125 C (-62~257 F) - (5) : ±0.50% EN 61326-1:2013 - EN 61326-1 2. 1 3. - Class A ISM : 1, Class A - c4á8d - 6
1 2. () 1 3.. ANSI/ISA-S75.13.01 5.3.5. 3. ISA 30. 500ohm (impedance). 20mA 10V. IEC 61514-2 CSA -,, Division 2, FM -,,, ATEX -, FISCO,, Type n IECEx -,, Type n CSA - 4X, IP66 FM - Type 4X, IP66 ATEX - IP66 IECEx - IP66 /, - CSA, FM, ATEX IECEx(I/O ) - () CUTR - (,, ) INMETRO - National Institute of Metrology, Quality and Technology( )( ) KGS - () NEPSI - () PESO CCOE - Petroleum and Explosives Safety Organisation - Chief Controller of Explosives( - )() TIIS - () /. : 67CFR 1/4 NPT : 1/4 NPT : 3/8 : 3/8 NPT : 1/2 NPT M20 (6) ( ) : 6.5mm(0.25) : 606mm(23.875) ( ) : 45 : 90 DVC6200 : 3.5kg(7.7lbs) : 8.6kg(19lbs) DVC6205: 4.1kg(9lbs) DVC6215: 1.4kg(3.1lbs), : A03600 () () : : () () - (7) (8) 4 20mA (9) : 4 20mA, :8 30VDC : 1% NAMUR NE43. (> 22.5mA) (< 3.6mA). ' '. - c4á8d - 7
1 2. () () (9) : 1, Off :0mA() On : 1A :30VDC : 2% Fisher.com. SEP Fisher Controls International LLC PED 2014/68/EU 4 3. (SEP), PED CE. CE. ANSI/ISA 51.1 -. 1. /. 2. Normal m 3 /hour - 0 C 1.01325bar normal. Scfh - 60 F 14.7psia. 3. - 1.4bar(20psig) ; - 5.5bar(80psig). 4. CUTR Ex d -53 C (-63.4 F). 5. 19mm(0.75) 60.. 6. M20 ATEX. 7. Quad O 6scfh 16 C(60 F) 3.7bar(53psi), DVC6200. 8. 18~22AWG, 4. 91m(300). 15m(50). 91m. 9.. 1 3. EMC - (1) (ESD) IEC 61000-4-2 4kV, 8kV A 10V/m 80~1000MHz(80% 1kHz AM )3V/m EM IEC 61000-4-3 1400~2000MHz(80% 1kHz AM ) 1V/m A 2000~2700MHz(80% 1kHz AM ) IEC 61000-4-8 50/60Hz 30A/m A IEC 61000-4-4 1kV A I/O / IEC 61000-4-5 1kV B RF IEC 61000-4-6 3Vrms 150kHz ~ 80MHz A + / - 1%. 1. A =. B =. DVC6200. Emerson Automation Solutions, : +1-641-754-3771 +1-800-338-8158 : education@emerson.com emerson.com/fishervalvetraining 8
2 22 DVC6200. HART HART HART. HART HART. I/O ( 2 1 ). HART HART. HART HART.. HART PROVOX, RS3 DeltaV Emerson. 2 1. HART HART DCS I/O I/O HART 4-20mA + HART Tx Tx A6188 1 DVC6200 10VDC... 9
2 2., THUM intrinsic safety barrier.. = [ ( )] - [ (HART )] - [ ] - [ x ] 10V DC. 2 1. HF340 HART 305m(1000) Belden 9501 Honeywell TDC2000. = [18.5(21.05mA)] - [2.3] - [48ohm 0.02105amp] = [18.5] - [2.3] - [1.01] = 15.19v 2 2. THUM ( ) + - HART ( ) intrinsic safety barrier( ) R + - : - ( ) 1 18.5v(21.05mA) - 2.3v(HF300 ) - Intrinsic safety barrier( ) x - 2.55v(121ohm x 0.02105amp) - Smart Wireless THUM ( ) 2 - x - 1.01v(305m(1000) Belden 9501 48ohmx 0.02105amp) = 3 = 15.19v - safety barrier(2.55v) : 1.., intrinsic safety barrier( ). 3. 2 3 THUM 2.25v 3.5mA 1.2v 25mA.. 8.0~9.5v. 10
2 1. (1) pf/ft (1) pf/m (2) Ohms/ft (2) Ohms/m BS5308/1, 0.5 sq mm 61.0 200 0.022 0.074 BS5308/1, 1.0 sq mm 61.0 200 0.012 0.037 BS5308/2, 1.5sq mm 61.0 200 0.008 0.025 BS5308/2, 1.5sq mm 121.9 400 0.022 0.074 BS5308/2, 0.75 sq mm 121.9 400 0.016 0.053 BS5308/2, 1.5 sq mm 121.9 400 0.008 0.025 BELDEN 8303, 22 awg 63.0 206.7 0.030 0.098 BELDEN 8441, 22 awg 83.2 273 0.030 0.098 BELDEN 8767, 22 awg 76.8 252 0.030 0.098 BELDEN 8777, 22 awg 54.9 180 0.030 0.098 BELDEN 9501, 24 awg 50.0 164 0.048 0.157 BELDEN 9680, 24 awg 27.5 90.2 0.048 0.157 BELDEN 9729, 24 awg 22.1 72.5 0.048 0.157 BELDEN 9773, 18 awg 54.9 180 0.012 0.042 BELDEN 9829, 24 awg 27.1 88.9 0.048 0.157 BELDEN 9873, 20 awg 54.9 180 0.020 0.069 1... 2... 1. 2 3. 2 3. 1k (POTENTIOMETER) A6192 1 2.. 3. 2 3 1 k (POTENTIOMETER). 4.... 11
ODV DVC6200. DVC6200.. 100,000pF.,. :. 100,000pF...,. - 18AWG, : 1KHz: 26 pf/ft Nom.- 20 Deg. DC C: 5.96Ohms/1000ft - UL 200V RMS(PLTC, CMG),150V RMS(ITC) = 100,000pF/(26pF/ft) = 3846ft - 18AWG, : : 29Ohms Nom. :.15μH/ft Nom. 1KHz: 26 pf/ft Nom.- 1KHz 97 pf/ft- = 100,000pF/(97pF/ft) = 1030ft 1mA 5V... HART.. (ft) = [160,000 - C (pf)] [C (pf/ft)] (m) = [160,000 - C (pf)] [C (pf/m)] 160,000 = HART RC HART 65μs FIELDVUE. C = HART 12
C = ( 2 1 ) C 50, 000pF Belden 9501 50pF/ft Foxboro I/A (1988). (ft) = [160,000-50,000pF] [50pF/ft] = 2200ft HART... Rosemount 333 HART Tri-Loop HART- DVC6200 Rosemount 333 HART Tri-Loop HART-,, 4-20mA. HART Tri-Loop 3 4-20mA 3. 2 4. 333 HART Tri Loop HART. 2 4. HART Tri-Loop HART Tri-Loop HART Tri-Loop HART Tri Loop. HART Tri Loop DIN HART Tri-Loop HART Tri-Loop?. HART Tri-Loop HART Tri-Loop 1? HART Tri-Loop () HART Tri-Loop 2 3 E0365 13
HART Tri-Loop 333 HART Tri-Loop Burst Command 3. HART Tri-Loop HART-. HART Tri-Loop 4-20mA. 1 (), 2 ( ), 3 ( ) 4 ( ). DVC6200 HART Tri-Loop. I/O > > > (2 2 6 6) HC, AD, PD (2-2-7-6) ODV I/O > > > (2 2 6 2) HC, AD, PD (2-2-7-2) ODV. /PV/SV/TV/QV. HART I/O > > > HART (2-2-6-4) HC, AD, PD (2-2-7-4) ODV I/O > > > HART (2-2-6-1) HC, AD, PD (2-2-7-1) ODV HART. 1 (PV). 2 (SV), 3 (TV) 4 (QV). DVC6200 Tri-Loop. ( ) A B A B. 14
3 > (2-1).,,...,.. - - (). - -,.... 33. 3 1.,,,,.. 3 1. (1) 4mA 20mA (ma) 0 3 Cmd 3() A-B 125% -25% / 99.46% / 0.50% () (Integrator) (integral) 0%/sec 0%/sec 0 9.4 / 0.26% -- 15
3 1. () (1) 5% 9.99 5psi (2) 5.0 1.. DVC6200.. 2. bar, kpa Kg/cm 2 > > (2-2-1) DVC6200. 4 20mA.. Out Of Service In Service. DVC6200..... ( ). > > (2-2-2). HART - 8. HART. HART.. HART (HART Universal 7 ) - 32. 16
- 16. HART. - 32.. - point-to-point 0.. HART 7 0 ~ 63, HART 5 0 ~ 15.. 0. - 12. - 12. - psi, bar, kpa kg/cm 2. -.. - ma 4-20mA. (CAL) -. 3 ~ 10... 1.. - (+) (-). 3 ~ 10. ODV. Hi -.,. 3 1. 17
Lo -.,. 3 1. 3 1. ZPC = ZPC = : ZPC = A6531 1 ma 4-20mA % DVC6200... 24. / > > /(2-2-3) /. 4. -.. -.. - -. 18
-/ -. - /. Hi / - Hi / Hi 123%. Hi / Hi. Hi / -. Hi 99.5%. 125% Hi /. Hi -.. 0%/,. Lo / - Lo / Lo 23%. Hi / Lo. Lo / -. Lo 0.5%. 25% Lo /. Lo -.. 0%/,. -. closed 100%, open 0%. Lo. Lo -. closed 0%, open 100%. Hi. 19
AD, PD, ODV. -. - ( ). -. (). -. Point to Point 4 20mA. Multidrop 24VDC...... -. - ( : ).,. 20
.. 0% 0%. 0% 100%... 3 2 3. 3 2. 21. ( %) ( %). -6.25%~106.25%... (1~21). Enter. 0.., (). (, ). 21
3 2. ( = ) 125 125 100 100, %, % 0 0-25 -25, % -25 0 100 125, % -25 0 100 125 = = 125 100, % 0 A6535 1-25 -25 0, % 100 125 = 22
SP - ( %). 0. SP - ( %). 0. () - (). 0.2~10.0. 0.0. () HC, AD PD. / - ODV -. /(Lead/Lag). /(Lead/Lag). /(lead and lag) ODV. () /(Lead/Lag) (Set Point).... /(Lead/Lag). /(Lead/Lag).. (). /(Lead/Lag). /(Lead/Lag) 1.0 /(Lead/Lag). - 3 2. 3 2. ODV /. 0.0 -. 0.2 /. 2.0 /. 2.0 - -. 23
> > (2-2-4) /.,. 11.. C M. 3 3,. 3 3. C D E F G H I J K L M 4.4 4.8 5.5 6.2 7.2 8.4 9.7 11.3 13.1 15.5 18.0 3.0 3.0 3.0 3.1 3.6 4.2 4.85 5.65 6.0 6.0 6.0 35 35 35 35 34 31 27 23 18 12 12 X( ) Proportional Gain, Velocity Gain, and Minor Loop Feedback Gain. / X( ).. ValveLink /. 3 4 Fisher Baumann... 24
3 4. Fisher 585C & 585CR 657 667 1051 & 1052 1061 1066SR 2052 3024C 25 50 60 68, 80 100, 130 30, 30i 34, 34i, 40, 40i 45, 45i, 50, 50i 46, 46i, 60, 60i, 70, 70i, & 80 100 30, 30i 34, 34i, 40, 40i 45, 45i, 50, 50i 46, 46i, 60, 60i, 70, 70i, 76, 76i & 80 100 20, 30 33 40 60, 70 30 40 60 68, 80, 100, 130 20 27, 75 1 2 3 30, 30E 34, 34E, 40, 40E 45, 45E ( ). ( ) ( ) ( ) ( ) E I J L M H K L 225 X (1) GX 750 K 1200 M. 16 C 32 E 54 H Baumann 10 E 25 H 54 J ( ) 3 6. 1. X =. = 4.2, = 3.0, = 18.0 2.. 3. A C. B. M H K L M H I K M J K L M G L H J M E H K (2) A C (3). A B C D P o (): P s (): 25
-.. -.. MLFB -.. -... -. / /,.. /... ( : F-E).. ( : F-G).... 26
12.. C M. B. 3 5, (integrator). 3 5. B C D E F G H I J K L M 0.5 2.2 2.4 2.8 3.1 3.6 4.2 4.8 5.6 6.6 7.8 9.0 0.3 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 35 35 35 35 35 34 31 27 23 18 12 12 X( ),,. X( ).. ValveLink /. -.. MLFB -.. (integral) -. (integral). (integral). (integral) - (integral) ( ) (integral).. / (integral) - (integral) 1. (Integrator) 1 (Set Point). (Dead Zone) 0%~2%, 1 (Set Point) 0%~+/-2%. 0.25%. 27
(integrator) - (integrator) (integrator). I/P 0~100%. > > (2-2-5) -. -,,,. - 3 6.. 60%... (DVC6200 )... 3 6. mm SStem #7 4.2-7 0.17-0.28 - SStem #19 8-19 0.32-0.75 - SStem #25 20-25 0.76-1.00 - SStem #38 26-38 1.01-1.50 - SStem #50 39-50 1.51-2.00 - SStem #110 51-110 2.01-4.125 - SStem #210 110-210 4.125-8.25 SStem #1 > 210 > 8.25 60-90 RShaft #1 - - 60-90 RShaft #2 - - 60-90 RShaft - - 60-90 - 3. :. A = - - B = -, C= -, : "" -. Lo : Low Bleed. 28
- ( ). (ZPC) 3 3. 3 3. A - ( A C) A - 0 B -( A) -( B) A - 0 B - B - YES.. Clockwise/Toward Bottom Counterclockwise/Toward Top..... A C : A CW/To Bottom Inst. CCW/To Top Inst. B : A CW/To Bottom Inst. CCW/To Top Inst.. 29
A, A...,. A /.. A. (PST) > > (2-2-7) ODV. (). PST. Not Configured. Hi Hi - (%),. Lo Lo - (%),. -. 5. PST. PST,. 3 4. 30
3 4. PST 30% -. 3 4. -. 3 4. -. -, (). 0. -. 10%. PST,. 3 5. 31
3 5. PST PST PST PST -. 0.25%/. -. 0.25%/. - (%).., 0.5% 1% 1.5%. - PST. - ( 3 4 ). DVC6200 (). PST. -.. - ( : = = ),. 32
. A C B B C A - B B - A B A ValveLink.. 1. ValveLink DVC6200. 2. PST. 3.. 4. / ( 3 6 ). (Pmin). (Pmax).. 3 7. 5. - 3 7. 3 7. PST A C B Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) - A C B 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) Pmax + 0.5 * (Psupply - Pmax) 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) 0.5 * Pmin 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) A Pmin - 0.5 * (Psupply + Pmin) Pmax + 0.5 * (Psupply - Pmax) Pmax + 0.5 * (Psupply - Pmax) Pmin - 0.5 * (Psupply + Pmin) 33
3 6., (Pmin) ( ) (%) ( ) - ( 3 4 ). DVC6200 (). PST. 1. ( ) 2. 3. 4. 5. 6. ( ) 7. SOV PST 8. PST PST.. PST PST.. 1. ( ) 2. 3. 4. 5. 6. ( ) 7. SOV PST 8. 34
PST. 1. 2. 3. 4. 5. NVM 6. 7. 8. 9. 10. 11. 35
> > (2-2-6) HC, AD, PD (2-2-7) ODV 4 20mA. / DVC6200 Series, D103556X012. -, ValveLink. -. - 0 100% 4 20mA. - 0 100% ( 1A). - ( 1A). -.. (< 3.6mA). (> 22.5mA)... 4 20mA. -. -.. 36
-. / /. HART 4 HART. 1. 3. 1 (PV) 2 (SV) 3 (TV) 4 (QV),, A, B, A B,,,, A, B, A B,,,, A, B, A B,, 4 20mA.. 4mA = 4mA =.. (HART ). -. - HART. Tri Loop, 3. HART 5 - ( 1) - / ( 2) - /PV/SV/TV/QV( 3) HART 7 - - ( 1) - / ( 2) - /PV/SV/TV/QV( 3) - ( 9) - ( 33) - ( 48) 37
HART /...,.. HART 7. Tri-Loop,., Tri-Loop.. > (2-3). ( 5 )., HART HART 48 (HART, D103639X012 ). ( : )... ( ).,,.. 5. HART 5 / HART 7 > > HART 5 / HART 7 (3-5-3) HC (3-5-4) AD, PD (3-5-5) ODV. HART.. HART Universal 5 HART Universal 7( ). HART Universal 7.. 38
4 44 DVC6200.. > > >. > (2-4) - 40-41 - 42-43 - 44-45 PST (ODV ) - 47 Instrument Mode Out Of Service, Protection None.... 39
. Yes, No. 45. 1... High and Low End Points MLFB( ) (Bias). (, 0 100% ). MLFB. 2. In Service. 4 1. 4 1.. 3.8mA. 4.0mA.. 1.. >> > / ( ). 2.. >> > / ( ). 0?. (I/P )... 0. 1. ( ). 2.. 1. ( ). 2.. 40
. - 4-20mA. - 4-20mA. LOOP + LOOP -. 4~20mA. (%). 0% = 100% = 1.. OK. 2 ~ 7. 2. 0% OK. 3. 100% OK. 4. 0% OK. 5. 100% OK. 6. 5% OK. 7. 95% OK. 8. In Service. LOOP + LOOP -. 4-20mA. (%). 1.. OK. 0% = 100% = 41
2. 0%.,, 10.0%, 1.0% 0.1%. 2. 3. 3. 100%. 3. 4. 4. 0%. 4. 5. 5. 100%. 5. 6. 6. 5%. 6. 7. 7. 95%. 7. 8. 8. In Service.. 3~10... 1.. > >. ( ). I/P.. ValveLink. 42
... A B.. 1. (Regulator). OK. 2. 0,. x. OK. 3.. OK. 4.., 3.0psi/0.207bar/20.7kPa, 0.30psi/0.0207bar/2.07kPa 0.03psi/0.00207bar/0.207kPa. OK (4). 5. 5... x. OK. 6.. OK. 7.. OK (7). 8. 8.. 43
HC. (Regulator)... 1. a) Zero Only b) Zero and Span( ). a. Zero Only (Regulator). OK. 5. b. Zero and Span (Regulator). OK. (Regulator). OK. 2. 2.. Increase Decrease.. 3.. 4.., 3.0psi/0.207bar/20.7kPa, 0.30psi/0.0207bar/2.07kPa 0.03psi/0.00207bar/0.207kPa. 5. 5. In Service. LOOP+ LOOP-. 4~20mA.. 1.. Input Range Low. OK. 2... 44
. 3.. OK. 4.., 0.4mA, 0.04mA 0.004mA. OK (4). 5. 5.. Input Range High. OK. 6.... 7.. OK. 8.. OK (8). 9. 9. In Service... B C. - - " A"... 50 ~ 70% 4 1.. ( 30 ). Low Bleed 2. 45
4 1. A ( ) - : - : - : W9034 - A. - 4 1.. ODV : ISA 7.0.01.. - - " C". C. - - " B". B. 46
PST (ODV ).,,.,... 47
, 5, 55 (1) 1. ( / ) ( HC ) /. ( 5 1 ) ID( ), DD HART ( /) 5 1. HC AD PD ODV ValveLink., HC,, (,, ), ValveLink Solo, ;,,,,. ValveLink (,, ). / (, ). /. 48
, (3).. DVC6200 20.., DVC6200 HART 48 -. 5 2.. 5 2. NE107 (1) (1) (1) (1) NVM (1) (1) (1) (1) NVM (1) (Accumulator) / 1.. - - 49
, 5 2. () NE107 (integrator) (integrator) - - / / A -.. - 1. -. -. NVM - NVM... -... 5 2. -. -. - I/P. I/P. I/P. I/P. -. 20. : < 10% > 3% > 90% < 97% : < 10% < 97% > 90% > 3% 50
, -. -,. - ROM( )... -.. (integrator) -. (integrator) -. -. -. 4-20mA.. 24mA. -.. NVM - NVM()... / -. Enter. -. DIP OUT. DIP. A A A. DVC6200 A.. - I/P. - 3 60 24.0 ~ 125.0%. O-.. 51
, -.. -. -. - -60 ~ 100 C(-76 ~ 212 F).... (accumulator) - (accumulator) (accumulator). (accumulator). (accumulator). 5 2. Hi - Hi. Hi. 5 1. Hi Hi Lo Lo. 99% 1%,. ValveLink. Hi-Hi - Hi Hi. Hi Hi. 5 1. Lo - Lo. Lo. 5 1. Lo-Lo - Lo. Lo. 5 1. / Hi - Hi /. / Lo - Lo /. -.. 5 1. - -25.0 ~ 125.0%.... - 1 (,, ).. (%).. 52
, Hi, Lo, Hi Hi Lo Lo. 5 1 Hi.,. 5 1. A6532 (accumulator) (accumulator)... ( ). 5 2. 5 2. (accumulator) (10%) (+/- 5%). E1473 53
,. -.. - 1.0%/. - 1.0%/. - 1.0%/. -. ODV. ODV DVC6200.... 1~30% 0.1%. ValveLink. (10%) ()., 30%... 4 20mA(Point-to-Point mode). ( ), ValveLink.. () DVC6200... +/-. 3~5. 1. ValveLink. 54
, 1. LOOP. 2.. 3. > >. 4. Standard (10%) Custom., 30%. 5. Stroke, Stroking Speed Pause Time. Yes. No. Stroke Speed 0.25%/. 6.. 7. (Set Point).. ValveLink.. - DVC6200 DVC6200, " " "".,. 1. ( 100~200 ).,. 2. DVC6200. 3. ValveLink. 4.. 55
, > (3-4).. ( /) ( / ) () ( HC ) / () () ( ) 56
6 66 DVC6200 Type 4X IP66. DVC6200 ( 52).. /........ DVC6200.,,..,........... 57
....... 1 2. DVC6200 ValveLink.. ValveLink ValveLink.. 1.. 2.. 3.. 4.. 5. DVC6200 DVC6215. 6.. (D103556X012).. I/P, printed wiring board(pwb),.. 6 1 DVC6200. 6 1. Phillips 5 mm 1.5 mm 2.5 mm 6 mm, printed wiring board(pwb) I/P 58
DVC6200.. 7 2 7 4.. 1. ( 43) 4 ( 2). 2. 6mm 3 ( 38). ( 154). 2.. 3. ( 1).. 4. / 6 1, 2. printed wiring board(pwb). 6 1. printed wiring board(pwb) W9924-1_ 59
7 2 7 4. Guide Surface. PWB. Guide Surface. Guide Surface.,,... 1. ( 237) ( 1). O- ( 12). 2. PWB ( 50).. 3. ( 2) ( 1). ( 64) 3 ( 38). 4. ( 38) 3. 3 ( 154). 16N m(138lbf in). /. 5 / / 5. ( 43). 60
DVC6200 I/P, PWB.... I/P. I/P. I/P 7 2 7 4. I/P ( 41). I/P. I/P I/P.. 1. I/P I/P ( 41) ( 169). 2. ( 231). 3. 6 2. 6 2. I/P I/P O- I/P () W8072 61
4. I/P O- ( 39). 5. I/P I/P ( 41) ( 169). I/P 1. ( 43). 2. 6 3. 2.5mm ( 169) I/P ( 41) ( 2) 4 ( 23). 3. ( 169) I/P ( 41) ( 2). I/P. 4. O- ( 39) ( 231) I/P ( 41). I/P 1. 6 2. ( 2) O- ( 39) ( 231). O-. O-. 2. 6 3 2( 210). 6 3. I/P ( 169) I/P ( 41) (4 ) ( 23) W9328 ( 210) 3. I/P ( 41) ( 2).. printed wiring board(pwb). 4. I/P ( 41) ( 169). 5. 4 ( 23) 1.6N m(14lbf ). 6. I/P. 62
(PWB) 7 2 7 4. PWB ( 50) ( 2). PWB. 1.. 2. ( 33). 3. ( 2) PWB ( 50). 4. PWB ( 50) O- ( 40) ( 2). Printed wiring board(pwb) DIP 1. O- ( 40). 2. PWB ( 50). I/P ( 41) PWB PWB. 3. PWB ( 50). 4. 3( 33) 1N m(10.1lbf ). 5. 6 2 PWB DIP. 6 2. DIP (1) DIP PT-PT 4 20 ma Point - Point 24VDC Multi Drop 1. 6 4. 63
6 4. (PWB) X0463 / X0432 4 ~ 20mA DIP point-to-point. 6.. 7.. 64
7 2 7 4. ( 24).. 1. ( 24) 4.. 2.. 1... 2. 6 5.. 6 5. W8074 3.. 2N m(20.7lbf ) 4. 4. Relay Type. 5.., DVC6200 DVC6205 ( 47), ( 66) ( 67). - ( 236, 7 3).. 65
,. 7 2 7 3. 1. ( 43). 2.,. ( 47)... ( 66) ( 67). 3., ( 64). 4.,. 7 2 7 4. (Terminal Strip). DVC6205 ( 6 6 ).. 6 6.. X0338 DVC6200 X0379 DVC6205. 1. ( 4) ( 58). 2. ( 4). 66
3.. 4. PWB ( 50). 5. ( 72).. O-. 1. O- ( 34), O-. 2.. ( 72). ( 72). 3. PWB ( 50).. 4.. 5. 2. 6. O- ( 36), 25/8 O-. O-. 7. ( 63) 25/8. 8. ( 4). 9. ( 4) ( 58). (1 ). ( 58). 6 3. 70 DVC6200... 1. 2 3 FIELDVUE. 2.. 3. 2 3 1kilohm Potentiometer 0. 4.. 67
5. 11.0 1kilohm Potentiometer. 6.. 7. 6 4(± 0.08mA). 8.. > > (3-5-2).... 6 3. 1. 1a.. 1a.. (Set Point)... 1b.. 1b. ( ). 1c.. 1c. ( ). 1d.. 1d. ( ). 1e.. 1e.... 2.. 2a.. 2a. ( ). 10VDC. 2b. (impedance). 2b. HART ( ). 2c.. 2c. ( ). 2d. HART. 2d. ( HART ). 2e.. 2e... 2f. 4mA. 2f.. 3.8mA. 2g. PWB. 2g.. 2h. PWB DIP. 2h. PWB DIP. PWB. 6 2. 68
6 3. 2.. 2j. PWB. 2j. 4-20mA. LOOP+ LOOP- 8.0 ~ 9.5VDC. 8.0 ~ 9.5VDC PWB. 3.,,. 4. ValveLink. 5.. 2k.. 2k. ( ). Utility Configure Communicator>Polling >Always Poll. 0. 2l.. 2l. PWB.. 2m. ValveLink. 2m.. 2n. ValveLink PC. 2n. ValveLink. 2p. ValveLink. 2p.. 3a.. 3a. :.. : ( ) ( ) 3b. I/P. 3b. I/P.. I/P I/P. 3c. I/P O- O-. 3d. I/P /. 3c. O-. 3d., ( ),,. 1680-1860ohm. I/P / I/P. 3e. h I/P. 3e. I/P. ( 55 ~ 80%, 60 ~ 85%). I/P. 3f.. 3f... 3g.. 3g... I/P.. 3h. 67CFR (Regulator). 3h. 67CFR (Regulator). 4a.. 4a. PWB. 4b. O-. 4b. O-. 5a.. 5a.. :... 69
DVC6200. 1. 2.? 3. 4.0mA 20.0mA - +. V @ 4.0 ma V @ 20.0 ma. ( 4.0mA 8.6V, 20mA 8.8V ). 4. HART? 5.? AC HC AD PD ODV 6.? 7.? 8. ""? 9. "Analog"? 10.? 11.? % A B % % 12.? 13. ValveLink (Status Monitor, Detailed Setup ). 1.? DVC6200 DVC6205/DVC6215 2. DVC6200,,,? 3.? 4.? 5. LBP/Customer. 6.? 7.? 70
7 77. Fisher. Emerson Automation Solutions Fisher.... 1* Elastomer Spare Parts Kit (kit contains parts to service one digital valve controller) Standard 19B5402X012 Extreme Temperature 19B5402X022 2* Small Hardware Spare Parts Kit (kit contains parts to service one digital valve controller) 19B5403X012 3* Seal Screen Kit [kit contains 25 seal screens (key 231) and 25 O rings (key 39)] 14B5072X182 4* Integral Mount Seal Kit (for 667 size 30i - 76i and GX actuators) [kit contains 5 seals (key 288)] 19B5402X032 Aluminum, with I/O Package Standard Standard, M20 Extreme Temperature Extreme Temperature, M20 19B5401X182 19B5401X392 19B5401X192 19B5401X402 Stainless Steel, without I/O Package Extreme Temperature, Natural Gas Certified 19B5401X312 Extreme Temperature, Natural Gas Certified, M20 19B5401X382 Stainless Steel, with I/O Package Extreme Temperature Extreme Temperature, M20 19B5401X202 19B5401X412 50 PWB Assembly (HW2) (see figure 7 2 and 7 4) for DVC6200 and DVC6205 PWB 7 1. Emerson. 5* Terminal Box Kit (see figure 7 1). PWB 2(HW2). Aluminum, without I/O Package Standard 19B5401X142 Standard, M20 19B5401X342 Standard, Natural Gas Certified 19B5401X162 Standard, Natural Gas Certified, M20 19B5401X362 Extreme Temperature 19B5401X152 Extreme Temperature, M20 19B5401X352 Extreme Temperature, Natural Gas Certified 19B5401X172 Extreme Temperature, Natural Gas Certified, M20 19B5401X372 Hardware Revision 2 (HW2), without I/O Package For instrument level HC For instrument level AD For instrument level PD For instrument level ODV Hardware Revision 2 (HW2), with I/O Package For instrument level HC For instrument level AD For instrument level PD For instrument level ODV * 71
7 1. I/O I/O 6* I/P Converter Kit Standard Extreme Temperature 38B6041X152 38B6041X132 7* Spare Module Base Assembly Kit, [kit contains module base (key 2); drive screws, qty. 2, (key 11); shield/label (key 19); hex socket cap screw, qty. 3, (key 38); self tapping screw, qty. 2 (key 49); pipe plug, qty. 3 (key 61); retaining ring, qty. 3 (key 154); screen (key 236); and flame arrestors, qty. 3 (key 243)] Aluminum GE18654X012 Stainless Steel GE18654X022 8* Spare Housing Assembly Kit [kit contains housing (key 1); vent assembly (key 52); seal (only included in Housing A kits) (key 288); seal (key 237); O ring (key 34); O ring (only used with integrally mounted regulator) (key 5)] 10 Remote Mount Feedback Unit Kit (see figure 7 5) [remote housing assembly (key25); hex socket set screw (key 58); 1/2 NPT pipe plug (key 62); wire retainer, qty 2 (key 131); terminal cover (key 255); o-ring (key 256); gasket (Housing A only, used for GX actuator) (key 287); seal (Housing A only, used for GX actuator) (key 288) 11 Feedback Array Kit Sliding Stem (Linear) [kit contains feedback array and hex socket cap screws, qty. 2, washer, plain, qty. 2, external tooth lock washer, qty. 2 (only with aluminum feedback array kit) and alignment template. 210 mm (8-1/4 inch) kit contains feedback array and hex socket cap screws, qty. 4, washer, plain, qty. 4, external tooth lock washer, qty. 4 (only with aluminum feedback array kit), alignment template and insert]. Stainless steel kits only for use with stainless steel mounting kits. 7 mm (1/4-inch) Aluminum GG20240X012 19 mm (3/4-inch) Aluminum GG20240X022 Stainless steel GE65853X012 25 mm (1-inch) Aluminum GG20240X032 Stainless steel GE65853X022 38 mm (1-1/2 inch) Aluminum GG20240X042 Stainless steel GE65853X032 50 mm (2-inch) Aluminum GG20240X052 Stainless steel GE65853X042 110 mm (4-1/8 inch) Aluminum GG20240X082 Stainless steel GE65853X062 210 mm (8-1/4 inch) Aluminum GG20243X012 Stainless steel GE65853X072 Aluminum Housing A (used for GX actuator) Standard Extreme Temperature Housing B (used for all actuators except GX) Standard Extreme Temperature Stainless Steel Housing B (used for all actuators except GX) Extreme Temperature 9* Spare I/P Shroud Kit [kit contains shroud (key 169) and hex socket cap screw, qty. 4 (key 23)] GE48798X032 GE48798X042 GE48798X072 GE48798X082 GE48798X102 GE29183X012 Rotary [Kit contains feedback assembly, pointer assembly, travel indicator scale and M3 machine pan head screws qty. 2]. Stainless steel kits only for use with stainless steel mounting kits. Aluminum GG10562X012 Stainless steel GG10562X022 Rotary array kit with coupler [Kit contains feedback assembly and NAMUR coupler] Aluminum GE71982X012 Stainless steel GE71982X022 12 Mounting Shield Kit [kit contains shield, qty. 3 and machine screws, qty. 6] GG05242X022 ( 10) /.. 13* Gasket/Seal Kit, for use with GX actuator [kit contains insulating gasket (key 287) and seal (key 288)] GE45468X012 72 *
.. / Emerson... ( 7 2 7 4 ) DVC6200 DVC6205 1 Housing (8) 11 Drive Screw (2 req'd) (DVC6205 only) 20 Shield (DVC6205 only) 52 Vent (2) 74 Mounting Bracket (DVC6205 only) 248 Screw, hex head (4 req d) (DVC6205 only) 249 Screw, hex head (4 req d) (DVC6205 only) 250 Spacer (4 req d) (DVC6205 only) 267 Standoff (2 req d) (DVC6205 only) 271 Screen (8) 287 Gasket, Housing A only (used for GX actuator) (DVC6200 only) 288 Seal (used for 667 size 30i - 76i and GX actuators) (DVC6200 only) ( 7 2, 7 3 7 4 ) DVC6200 DVC6205 16* O ring (1) (3 req'd) 29 Warning label, for use only with LCIE hazardous area classifications 33 Mach Screw, pan head (2) (3 req'd) 38 Cap Screw, hex socket (2)(7) (3 req'd) 43* Cover Assembly (includes cover screws) Standard GG53748X012 Extreme temperature GG53748X022 48 Nameplate 49 Screw, self tapping (2 req'd) (7) 61 Pipe Plug, hex socket (7) Housing A with relay C (2 req'd ) (used for GX actuator) Housing A with relay B (1 req'd) (used for GX actuator) Housing B with relay B and C (1 req'd) (used for all actuators except GX) Not required for relay A * 1. 2. 3. 6. I/P 7. 8. 9. 63 Lithium grease (not furnished with the instrument) 64 Pipe thread sealant, anaerobic (not furnished with the instrument) 65 Lubricant, silicone sealant (not furnished with the instrument) 154 Retaining Ring (2) (3 req'd) 236 Screen (required for relay B and C only) (8) 237 Module Base Seal (1) ( 7 2 7 4 ) DVC6200 DVC6205 2 Module Base (7) 11 Drive Screw (7) (2 req'd) 12 O ring (1) 19 Shield (7) 61 Pipe Plug, hex socket (7) (3 req'd) 243 Slotted Pin (flame arrestor) (7) (3 req'd) I/P ( 7 2 7 4 ) DVC6200 DVC6205 23 Cap Screw, hex socket (2)(9) (4 req'd) 39* O ring (1)(3)(6) 41 I/P Converter (6) 169 Shroud (6)(9) (see figure 6 3) 210* Boot (1)(6) (2 req'd) (see figure 6 3) 231* Seal Screen (1)(3)(6) ( 7 2 7 4 ) DVC6200 DVC6205 24* Relay Assembly, (includes shroud, relay seal, mounting screws) Standard Standard Bleed Housing A (used for GX actuator) Single acting direct (relay C) Single acting reverse (relay B) Housing B (used for all actuators except GX) Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) Low Bleed Housing A (used for GX actuator) Single acting direct (relay C) Single acting reverse (relay B) Housing B (used for all actuators except G) Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) 38B5786X182 38B5786X172 38B5786X132 38B5786X052 38B5786X092 38B5786X202 38B5786X192 38B5786X152 38B5786X072 38B5786X112 73
24* Relay Assembly, (includes shroud, relay seal, mounting screws) (continued) Extreme Temperature Standard Bleed Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) 38B5786X142 38B5786X032 38B5786X102, ( 7 3 ) DVC6200 DVC6205 Low Bleed Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) ( 7 2 7 4 ) DVC6200 DVC6205 4 Terminal Box Cap 34* O ring (1)(5) 36* O ring (1)(5) 58 Set Screw, hex socket (2) 72 Cap Screw, hex socket (2) 164 Terminal Box Assembly 38B5786X162 38B5786X082 38B5786X122 ( 7 4 ) DVC6205 4 Terminal Box Cap 34* O ring (1)(5) 36* O ring (1)(5) 58 Set Screw, hex socket (2) 62 Pipe Plug, hex hd 262 Adapter 263* O-ring 47* Pressure Gauge Double acting (3 req'd); Single acting (2 req'd) PSI/MPA Gauge Scale To 60 PSI, 0.4 MPa To 160 PSI, 1.1 MPa PSI/bar Gauge Scale To 60 PSI, 4 bar To 160 PSI, 11 bar PSI/KG/CM 2 Gauge Scale To 60 PSI, 4 KG/CM 2 To 160 PSI, 11 KG/CM 2 66 Pipe Plug, hex head For units w/o gauges 67 Tire Valve, used with Tire Valve Option only Double acting (3 req'd); Single acting (2 req'd) DVC6215 ( 7 5 ) 65 Lubricant, silicone sealant (not furnished with the instrument) 256* O-Ring HART HF340, DIN rail mount HF341, DIN rail Mount, pass through (no filter) 74 *Recommended spare parts 1. Available in the Elastomer Spare Parts Kit 2. Available in the Small Hardware Spare Parts Kit 5. Available in the Terminal Box Kit
7 2. FIELDVUE DVC6200 A - (GX ) B - (GX ) - -- GE40185 1/3, O- 75
7 2. FIELDVUE DVC6200 () C-C 2 : 1 A-A E-E 2 : 1 SST, O- F-F 2 : 1 GE40185 2/3 7 3. - -- 47 66 47 67, O- GE40185 3/3 76
7 4. FIELDVUE DVC6205 B-B A-A, O- H-H GE40181 77
7 4. FIELDVUE DVC6205 () C-C 2 : 1 SST E-E 2 : 1 - - -- GE40181, O- 78
7 4. FIELDVUE DVC6205 () WALL GE40181, O- 79
7 5. FIELDVUE DVC6215 : 158 A-A / GE46670-B A (GX ) : 158 A-A GE40178-B / B (GX ) 80
A AA A HART HART(Highway Addressable Remote Transducer). 4-20mA 2.. HART,.. HART FSK( ). 1200Hz 2200Hz 4-20mA. 1 0 ( A 1 ). 4-20mA. HART 0 DC 4-20mA.. A 1. HART +0.5V 0-0.5V 1200Hz 1 2200Hz 0 0 = 0 A6174 HART,. Pipelines, Custody Transfer Sites, Tank Farms. DIP 6 2. DVC6200 DVC6200,,. I/P, (pwb).. MLFB( ).. A 3, A 4, A 5, A 6. 81
A 2. ValveLink FIELDVUE -PC HART E1362 DVC6200. -.. I/P. I/P I/P. I/P., I/P.. (4-20mA ) A B. A. B. A 3, A 4, A 5, A... I/P.. I/P I/P. A B.. I/P.. 82
A 3. FIELDVUE DVC6200 4-20mA + HART A I/P B E1361 A 4. FIELDVUE DVC6200 AO 4-20mA + - - + - + A AI 8-30 VDC + - I/P B 83
A 5. FIELDVUE DVC6200 AO 4-20mA + - - + - + A I/P DI 30V + - B A 6. FIELDVUE DVC6200 I/P W9925-2 84
B HC, AD, PD ODV. //. ( B- 2 ). HC, AD, PD ODV / Actual Travel B- 5 Actuator Manufacturer B- 5 Actuator Model B- 5 Actuator Selection B- 5 Actuator Size B- 5 Actuator Style B- 7 Air B- 5 Alert Record Full (Alert Record/Status Alerts Enable) B- 9 Alert Record Full (Alert Record/Status Alerts NE107) B- 9 Alert Record Not Empty (Alert Record/Status Alerts Enable) B- 9 Alert Record Not Empty (Alert Record/Status Alerts NE107) B- 9 Alert Switch Source B- 7 Analog Input B- 3, B- 11 Analog Input (Calibration) B- 10 Analog Input Units B- 5 Area Units B- 5 Auto Calibration B- 4, B- 10 Autocal in Progress (Alert Record/Status Alerts Enable) B- 9 Autocal in Progress (Alert Record/Status Alerts NE107) B- 9 Auxiliary Terminal Action B- 5 Auxiliary Terminal Action, Edit B- 5 Breakout Timeout B- 7 Breakout Torque B- 5 Burst Command B- 7 Burst Enable B- 7 Calibration Button B- 5 Calibration in Progress (Alert Record/Status Alerts Enable) B- 9 Calibration in Progress (Alert Record/Status Alerts NE107) B- 9 Calibration Record B- 10 Calibration Time B- 10 Calibration Type B- 10 Calibrator B- 10 Change Control Mode B- 6, B- 11 Change Instrument Mode B- 1, B- 5 Change to HART 5 / Change to HART 7 B- 11 Change Travel/Pressure Select B- 6, B- 11 Change Write Protection B- 1, B- 3, B- 5 Clear Records B- 9, B- 11 Control Mode B- 6, B- 11 Critical NVM Failure (PST Prohibited Electronics Alerts) B- 9 / Critical NVM Failure (Electronics Alerts NE107) B- 8 Critical NVM Failure Shutdown B- 8 Custom Characterization B- 6, B- 11 Cycle Count B- 8, B- 11 Cycle Count Hi (Travel History Alerts Enable) B- 8 Cycle Count High (Travel History Alerts NE107) B- 8 Cycle Count High Alert Point B- 8 Cycle Count/Travel Accum Deadband B- 8 Days Powered Up B- 11 DD Information B- 3 Description B- 3, B- 5 Device ID B- 3 Device Revision B- 3 Device Setup B- 4 Device Status B- 3, B- 11 Diagnostic Data Available (Alert Record/Status Alerts Enable) B- 9 Diagnostic Data Available (Alert Record/Status Alerts NE107) B- 9 Diagnostic in Progress (Alert Record/Status Alerts Enable) B- 9 Diagnostic in Progress (Alert Record/Status Alerts NE107) B- 9 Drive Current Failure (Electronics Alerts NE107) B- 8 Drive Current Failure (PST Prohibited Electronics Alerts) B- 9 Drive Current Failure Shutdown B- 8 Drive Signal B- 3, B- 11 Drive Signal (Electronics Alerts Enable) B- 8 Drive Signal (Electronics Alerts NE107) B- 8 Dynamic Torque B- 5 Edit Cycle Counts B- 8 Edit Instrument Time B- 5, B- 9 Edit Travel Accumulator B- 8 Effective Area B- 5 Fail Signal B- 7 Fallback Recovery B- 6, B- 9, B- 11 Fallback-Sensor Failure B- 9 Fallback-Sensor/Travel Deviation B- 9 Feedback Connection B- 5, B- 7 Firmware Revision B- 3 Flash Integrity Failure (Electronics Alerts NE107) B- 8 Flash Integrity Failure (PST Prohibited Electronics Alerts) B- 9 Flash Integrity Failure Shutdown B- 8 Flow Direction B- 5 Flow Tends to B- 5 85
/ Function B- 7 Hardware Revision (Device) B- 3 HART Long Tag B- 3, B- 5 HART Tag B- 3, B- 5 HART Universal Revision B- 3 HART Variable Assignments B- 7 High Friction Breakout Pressure B- 7 Hi Limit/Cutoff Point B- 6, B- 8 Hi Limit/Cutoff Select B- 6 Hi Soft Cutoff Rate B- 6 Incoming Pressure Threshold B- 7 Inlet Pressure B- 5 Input Characterization B- 6, B- 11 Input Range Hi B- 5 Input Range Lo B- 5 Instrument Alert Record B- 9 Instrument Level B- 3 Instrument Mode B- 1, B- 5 Instrument Serial Number B- 3, B- 5 Instrument Time is Approximate (Alert Record/Status Alerts Enable) B- 9 Instrument Time is Approximate (Alert Record/Status Alerts NE107) B- 9 Integral Enable (Travel & Pressure Tuning) B- 7 Integral Gain (Travel & Pressure Tuning) B- 7 Integrator Limit B- 7 Integrator Saturated Hi (Alert Record/Status Alerts Enable) B- 9 Integrator Saturated Hi (Alert Record/Status Alerts NE107) B- 9 Integrator Saturated Lo (Alert Record/Status Alerts Enable) B- 9 Integrator Saturated Lo (Alert Record/Status Alerts NE107) B- 9 Integral Dead Zone B- 7 Last AutoCal Status B- 10 Last PST Results B- 7 Leak Class B- 5 Length Units B- 5 Lever Arm Length B- 5 Lever Style B- 5 Limit Switch Trip Point B- 7 Limit Switch Valve Close B- 5 Limit Switch Valve Open B- 5 Lo Limit/Cutoff Point B- 6, B- 8 Lo Limit/Cutoff Select B- 6 Lo Soft Cutoff Range B- 6 Low Friction Breakout Pressure B- 7 Lower Bench Set B- 5 Manual Calibration B- 10 Manufacturer (Device) B- 3 Maximum Allowable Travel Movement B- 7 Maximum Recorded Temperature B- 11 Maximum Supply Pressure B- 7 Message B- 3, B- 5 Minimum Recorded Temperature B- 11 / Minimum Required Travel Movement B- 7 Minor Loop Sensor Failure (PST Prohibited Electronics Alerts) B- 9 Minor Loop Sensor Failure (PST Prohibited Electronic Alerts) B- 9 Minor Loop Sensor Failure (Sensor Alert NE107) B- 9 Minor Loop Sensor Failure Shutdown B- 9 MLFB Gain (Travel & Pressure Tuning) B- 7 Model (Device) B- 3 Nominal Supply B- 5 Non-Critical NVM Failure (Electronics Alerts NE107) B- 8 Non-Critical NVM Failure Shutdown B- 8 Number of Power Ups B- 11 Outgoing Pressure Threshold B- 7 Output Circuit Error (Electronics Alerts Enable) B- 8 Output Circuit Error (Electronics Alerts NE107) B- 8 Outlet Pressure B- 5 Output Pressure Limit Enable B- 8 Output Terminal Enable B- 7 Packing Type B- 5 Partial Stroke Test B- 11 Polling Address B- 5 Port A Overpressurized (Pressure Alerts Enable) B- 8 Port A Overpressurized (Pressure Alerts NE107) B- 8 Port A Pressure Limit B- 8 Port Diameter B- 5 Port Type B- 5 Position Transmitter B- 5 Pressure A B- 3, B- 11 Pressure A-B B- 3, B- 11 Pressure B B- 3, B- 11 Pressure Control B- 9 Pressure Deviation Alert Point B- 8 Pressure Deviation (Pressure Alerts Enable) B- 8 Pressure Deviation (Pressure Alerts NE107) B- 8 Pressure Deviation Time B- 8 Pressure Fallback Active (PST Prohibited Alerts Enable) B- 9 Pressure Fallback Active (Sensor Alerts Enable) B- 9 Pressure Fallback Active (Sensor Alerts NE107) B- 9 Pressure Range High B- 6 Pressure Range Low B- 6 Pressure Sensor Failure (PST Prohibited Alerts Enable) B- 9 Pressure Sensor Failure (Sensor Alerts NE107) B- 9 Pressure Sensor Failure Shutdown B- 9 Pressure Sensors (Calibration) B- 10 Pressure Tuning Set B- 7 Pressure Units B- 5 Program Flow Failure (Partial Stroke Alerts NE107) B- 9 Program Flow Failure Shutdown B- 9 Proportional Gain (Travel & Pressure Tuning) B- 7 PST Abnormal (Partial Stroke Alerts Enable) B- 9 PST Abnormal (Partial Stroke Alerts NE107) B- 9 PST Abnormal Criteria B- 7 86
/ PST Abort Criteria B- 7 PST Enable B- 7 PST Calibration B- 10 PST Deferral Reason B- 7 PST Pass (Partial Stroke Alerts Enable) B- 9 PST Pass (Partial Stroke Alerts NE107) B- 9 PST Prohibited (Partial Stroke Alerts Enable) B- 9 PST Prohibited (Partial Stroke Alerts NE107) B- 9 PST Result Criticality B- 7 PST Start Point B- 7 PST Variables B- 7 Push Down To B- 5 PWB Serial Number B- 3 Quick Release B- 5 Rated Travel B- 5 Relay Adjust B- 10 Relay Type B- 7 Reference Voltage Failure (Electronics Alerts NE107) B- 8 Reference Voltage Failure (PST Prohibited Electronics Alerts) B- 9 Reference Voltage Failure Shutdown B- 8 Reset PST Abnormal Alert B- 11 Restart Control Mode B- 6, B- 11 Restart Processor B- 11 Return Lead B- 7 Seat Type (Trim) B- 5 Setpoint B- 3, B- 8, B- 11 Short Duration PST B- 7 Shutdown Activated (Electronics Alerts Enable) B- 8 Shutdown Activated (Electronics Alerts NE107) B- 8 Simulate B- 11 Solenoid Valve B- 5 SP Rate Close B- 6 SP Rate Open B- 6 Spring Rate B- 5 Spring Rate Units B- 5 Stabilize/Optimize B- 7, B- 11 Stem Diameter B- 5 Stroke Valve B- 11 Supply Pressure B- 3, B- 8, B- 11 Supply Pressure Hi (Pressure Alerts Enable) B- 8 Supply Pressure Hi (Pressure Alerts NE107) B- 8 Supply Pressure Hi Alert Point B- 8 Supply Pressure Lo (PST Prohibited Alerts Enable) B- 8 Supply Pressure Lo (Pressure Alerts Enable) B- 8 Supply Pressure Lo Alert Point B- 6, B- 8 Switch Closed B- 7 Temperature B- 11 Temperature Units B- 5 Temp Sensor Failure (PST Prohibited Alerts Enable) B- 9 Temp Sensor Failure (Sensor Alerts NE107) B- 9 Temp Sensor Failure Shutdown B- 9 Torque Units B- 5 Transmitter Output B- 7 Travel B- 3, B- 8, B- 11 Travel Accumulator (Alert Setup) B- 8 / Travel Accumulator (Travel History) B- 11 Travel Accumulator Alert Point B- 8 Travel Accumulator High (Travel History Alerts Enable) B- 8 Travel Accumulator High (Travel History Alerts NE107) B- 8 Travel Alert Deadband B- 8 Travel Control B- 9 Travel Counts B- 11 Travel Deviation B- 8 Travel Deviation (PST Prohibited Alerts Enable) B- 9 Travel Deviation (Travel Alerts Enable) B- 8 Travel Deviation (Travel Alerts NE107) B- 8 Travel Deviation Alert Point B- 8 Travel Deviation Time B- 8 Travel Deviation Pressure Fallback B- 6 Travel Deviation Pressure Fallback Time B- 6 Travel Hi (Travel Alerts Enable) B- 8 Travel Hi (Travel Alerts NE107) B- 8 Travel Hi Hi (Travel Alerts Enable) B- 8 Travel Hi Hi (Travel Alerts NE107) B- 8 Travel Hi Alert Point B- 8 Travel Hi Hi Alert Point B- 8 Travel Lo (Travel Alerts Enable) B- 8 Travel Lo (Travel Alerts NE107) B- 8 Travel Lo Lo (Travel Alerts Enable) B- 8 Travel Lo Lo (Travel Alerts NE107) B- 8 Travel Lo Alert Point B- 8 Travel Lo Lo Alert Point B- 8 Travel Limit/Cutoff Hi (Travel Alerts Enable) B- 8 Travel Limit/Cutoff Hi (Travel Alerts NE107) B- 8 Travel Limit/Cutoff Lo (Travel Alerts Enable) B- 8 Travel Limit/Cutoff Lo (Travel Alerts NE107) B- 8 Travel/Pressure Select B- 6, B- 9, B- 11 Travel Sensor Failure (Sensor Alerts NE107) B- 9 Travel Sensor Failure (PST Prohibited Alerts Enable) B- 9 Travel Sensor Failure Shutdown B- 9 Travel Sensor Motion B- 5, B- 7 Travel Tuning Set B- 7 Travel Units B- 5 Unbalanced Area B- 5 Upper Bench Set B- 5 Valve Class B- 5 Valve Manufacturer B- 5 Valve Model B- 5 Valve Serial Number B- 3, B- 5 Valve Size B- 5 Valve Style B- 5, B- 7 Velocity Gain B- 7 View Alert Records B- 9, B- 11 View/Edit Burst Messages B- 7 View/Edit Lag Time B- 6 Volume Booster B- 5 Write Protection B- 1, B- 3, B- 5 Zero Power Condition B- 7 87
B- 1. B- 2. Hot Key 1 Instrument Mode 2 Change Instrument Mode 3 Write Protection 4 Change Write Protection HART Application 1 Offline 2 Online 3 Utility 4 HART Diagnostics Online 1 Overview 2 Configure 3 Service Tools B- 3. (1) Overview 1 Device Status 2 Analog Input 3 Setpoint 4 Travel 5 Drive Signal 6 Pressure Variables 7 Device Information 1-6 Pressure Variables 1 Supply Pressure 2 Pressure A 3 Pressure B 4 Pressure A-B 1-7 Device Information 1 Identification 2 Revisions 3 Security 1-7-3 Security 1 Write Protection 2 Change Write Protection 1 1-7-1 Identification 1 HART Tag 2 HART Long Tag 2 3 Manufacturer 4 Model 5 Instrument Level 6 Device ID and Serial Numbers 7 Message 8 Description 1-7-2 Revisions 1 HART Universal Revision 2 Device Revision 3 Hardware Revision 4 Firmware Revision 5 DD Information 1-7-1-6 Device ID and Serial Numbers 1 Device ID 2 Valve Serial Number 3 Instrument Serial Number 4 PWB Serial Number : 1 AD, PD ODV. 2 HART HART 7. B- 4. (2-1) Guided Setup 1 Device Setup 2 Auto Calibration 88
B- 5. > (2-2-1) > (2-2-2) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke Test (PST) 7 Outputs 2-2-2-6-5 Accessories 1 Volume Booster 2 Quick Release 3 Solenoid Valve 4 Position Transmitter 5 Limit Switch Valve Open 6 Limit Switch Valve Close 2-2-2-6-4-6 3 Lever Style 1 Lever Style 2 Lever Arm Length : 1 HART HART 7. 2 ODV. 3. 2-2-1 2-2-2-1 Mode and Protection Identification 1 Instrument Mode 1 HART Tag 2 Change Instrument Mode 2 HART Long Tag 3 Write Protection 3 Description 4 Change Write Protection 4 Message 5 Polling Address 2-2-2 Instrument 2-2-2-2 1 Identification Serial Numbers 2 Serial Numbers 3 Units 4 Terminal Box 5 Analog Input Range 6 Spec Sheet 2-2-2-3 Units 7 Edit Instrument Time 2-2-2-6 Spec Sheet 1 Units 2 Valve 3 Trim 4 Actuator 5 Accessories 2-2-2-6-3 Trim 1 Seat Type 2 Leak Class 3 Port Diameter 4 Port Type 5 Flow Direction 6 Push Down To 7 Flow Tends To 8 Unbalanced Area 2-2-2-6-4 Actuator 1 Actuator Manufacturer 2 Actuator Model 3 Actuator Size 4 Actuator Selection 5 Travel 3 6 Lever Style 7 Effective Area 8 Spring Rate 9 Air 2-2-2-6-4-9 Air 1 Air 2 Upper Bench Set 3 Lower Bench Set 4 Nominal Supply 2-2-2-6-2 Valve 1 Valve Manufacturer 2 Valve Model 3 Valve Serial Number 4 Valve Style 5 Stem Diameter 6 Packing Type 7 Valve Travel 8 Inlet/Outlet Pressures 9 Torque 2-2-2-6-4-5 Travel 1 Feedback Connection 2 Travel Sensor Motion 3 1 Instrument Serial Number 2 Valve Serial Number 1 Pressure Units 2 Temperature Units 3 Analog Input Units 2-2-2-4 Terminal Box 1 Calibration Button 2 Auxiliary Terminal Action 2 3 Edit Auxiliary Terminal Action 2-2-2-5 Analog Input Range 1 Input Range Hi 2 Input Range Lo 2-2-2-6-1 Units 1 Travel Units 2 Length Units 3 Area Units 4 Spring Rate Units 5 Torque Units 2-2-2-6-2-4 Valve Style 1 Valve Style 2 Valve Size 3 Valve Class 1 2-2-2-6-2-7 Valve Travel 1 Rated Travel 2 Actual Travel 2-2-2-6-2-8 Inlet/Outlet Pressures 1 Inlet Pressure 2 Outlet Pressure 2-2-2-6-2-9 Torque 3 1 Dynamic Torque 2 Breakout Torque 2 89
B- 6. > /(2-2-3) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke Test (PST) 7 Outputs : 1 AD, PD ODV. 2-2-3 Travel/Pressure Control 1 Travel/Pressure Select 2 Change Travel/Pressure Select 3 Cutoffs/Limits 4 Pressure Control 5 Pressure Fallback 1 6 Control Mode 7 Characterization 8 Dynamic Response 2-2-3-7 (HC) 2-2-3-8 (AD, PD, ODV) Dynamic Response 1 SP Rate Open 2 SP Rate Close 3 View/Edit Lag Time 2-2-3-6 (HC) 2-2-3-7 (AD, PD, ODV) Characterization 1 Input Characterization 2 Custom Characterization 2-2-3-3 Cutoffs and Limits 1 Hi Limit/Cutoff Select 2 Hi Limit/Cutoff Point 3 Hi Soft Cutoff Rate 4 Lo Limit/Cutoff Select 5 Lo Limit/Cutoff Point 6 Lo Soft Cutoff Rate 2-2-3-4 Pressure Control 1 Pressure Range High 2 Pressure Range Low 2-2-3-5 (AD, PD, ODV) Pressure Fallback 1 1 Tvl Dev Press Fallback 2 Tvl Dev Press Fallback Time 3 Fallback Recovery 4 Supply Pressure Lo Alert Point 2-2-3-5 (HC) 2-2-3-6 (AD, PD, ODV) Control Mode 1 Control Mode 2 Change Control Mode 3 Restart Control Mode 90
B- 7. > (2-2-4) > (2-2-7) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke 1 7 Outputs WITH I/O PACKAGE 2-2-6 (HC, AD, PD) 2-2-7 (ODV) Outputs 1 Output Terminal Config 2 Limit Switch Configuration 3 Alert Switch Configuration 4 HART Var Assignments 5 Transmitter Output 6 Burst Mode 2-2-6-6 (HC, AD, PD) 2-2-7-6 (ODV) Burst Mode 1 Burst Enable 2 View/Edit Burst Messages 2-2-6-4 (HC, AD, PD) 2-2-7-4 (ODV) HART Var Assignments 1 Primary Variable (PV) 2 Secondary Variable (SV) 3 Tertiary Variable (TV) 4 Quaternary Variable (QV) 2 WITH I/O PACKAGE 2-2-4 WITHOUT I/O PACKAGE Tuning 1 Travel Tuning 2 Pressure Tuning 3 Travel/Pressure Integral Settings Travel/Pressure Integral Settings 1 Integral Dead Zone 2 Integrator Limit 2-2-6-1 (HC, AD, PD) 2-2-7-1 (ODV) Output Terminal Config 1 Output Terminal Enable 2 Function 3 Fail Signal 2-2-6-2 (HC, AD, PD) 2-2-7-2 (ODV) Limit Switch Configuration 1 Limit Switch Trip Point 2 Switch Closed 2-2-5 Valve and Actuator 1 Valve Style 2 Actuator Style 3 Feedback Connection 4 Relay Type 5 Zero Power Condition 6 Travel Sensor Motion 7 Max Supply Pressure 2-2-6 2-2-6-3 (HC, AD, PD) 2-2-7-3 (ODV) Alert Switch Configuration 1 Alert Switch Source 2-2-4-3 Partial Stroke 1 1 Test Configuration 2 Test Acceptance Criteria 3 PST Alert Behavior 4 PST Deferral Reason 5 Last PST results 2-2-6-3 PST Alert Behavior 1 PST Abnormal Criteria 2 PST Abort Criteria 3 PST Result Criticality 2-2-4-1 Travel Tuning 1 Travel Tuning Set 2 Proportional Gain 3 Velocity Gain 4 MLFB Gain 5 Integral Enable 6 Integral Gain 7 Stabilize/Optimize 2-2-4-2 Pressure Tuning 1 Pressure Tuning Set 2 Proportional Gain 3 MLFB Gain 4 Integral Enable 5 Integral Gain 2-2-6-1 Test Configuration 1 PST Enable 2 PST Start Point 3 PST Variables 4 Return Lead 5 Short Duration PST 6 Max Allowable Travel Movement 7 Min Required Travel Movement 2-2-6-2 Test Acceptance Criteria 1 Outgoing Pressure Threshold 2 Incoming Pressure Threshold 3 High Friction Breakout Press 4 Low Friction Breakout Press 5 Breakout Timeout WITHOUT I/O PACKAGE 2-2-6-1 (HC, AD, PD) 2-2-6 (HC, AD, PD) 2-2-7-1 (ODV) 2-2-7 (ODV) Outputs HART Var Assignments 1 HART Var Assignments 1 Primary Variable (PV) 2 Burst Mode 2 Secondary Variable (SV) 3 Tertiary Variable (TV) 4 Quaternary Variable (QV) 2-2-6-2 (HC, AD, PD) 2-2-7-2 (ODV) Burst Mode 1 Burst Enable 2 View/Edit Burst Messages 2 : 1 ODV. 2 HART 5 ' '. 91
B- 8. > (2-3-4) (2-3-1) : Alert Setup 1 Electronics 2 Pressure 3 Travel 4 Travel History 5 Partial Stroke 1 6 Sensors 7 Alert Record/Status 2-3-4-1 Travel History Alerts Enable 1 Cycle Count Hi 2 Tvl Accum Hi 2-3-4 Travel History 1 Travel History Alerts Enable 2 Travel History Alerts NE107 4 3 Cycle Count/Travel Accum Deadband 4 Cycle Counter 5 Travel Accumulator 2-3-4-5 Travel Accumulator 1 Travel Accumulator 2 Edit Travel Accumulator 3 Travel Accumulator Alert Point 1 ODV. 2-3-4-4 Cycle Counter 1 Cycle Count 2 Edit Cycle Counts 3 Cycle Count High Alert Point 2-3-1 Electronics 1 Electronic Alerts Enable 2 Electronic Alerts NE107 3 Electronic Alerts Shutdown 2-3-1-3 Electronic Alerts Shutdown 1 Drive Current Failure Shutdown 2 Critical NVM Failure Shutdown 3 Non-Critical NVM Failure Shutdown 4 Flash Integrity Failure Shutdown 5 Reference Voltage Failure Shutdown 2-3-2 Pressure 1 Pressure Alerts Enable 2 Pressure Alert NE107 4 2 Supply Pressure 3 Supply Pressure Hi Alert Point 4 Supply Pressure Lo Alert Point 5 Pressure Deviation Alert Point 6 Pressure Deviation Time 7 Port A Pressure Limit 8 Output Pressure Limit Enable 2-3-4-2 Travel History Alerts NE107 1 Cycle Count High 2 Travel Accumulator High 2-3-3 Travel 1 Travel Alerts Enable 2 Travel Alerts NE107 4 3 Travel 4 Setpoint 5 Travel Alert DB 6 Travel Deviation 7 Travel Limit 8 Travel Limit/Cutoff 2-3-3-8 Travel Limit/Cutoff 1 Hi Limit/Cutoff Point 2 Lo Limit/Cutoff Point 2-3-3-7 Travel Limit 1 Travel Hi Hi Alert Point 2 Travel Lo Lo Alert Point 3 Travel Hi Alert Point 4 Travel Lo Alert Point 2 AD, PD ODV. 3. 4 NE107 HART 7. HART 5 NE107. 2-3-1-1 Electronic Alerts Enable 1 Drive Signal 2 Shutdown Activated 3 Output Circuit Error 2-3-1-2 Electronic Alerts NE107 1 Drive Current Failure 2 Drive Signal 3 Critical NVM Failure 4 Non-Critical NVM Failure 5 Flash Integrity Failure 6 Reference Voltage Failure 7 Shutdown Activated 8 Output Circuit Error 2-3-2-1 Pressure Alerts Enable 1 Supply Pressure Hi 2 Supply Pressure Lo 2 3 Pressure Deviation 4 Port A Overpressurized 2-3-2-2 Pressure Alerts NE107 1 Supply Pressure Hi 2 Supply Pressure Lo 2 3 Pressure Deviation 4 Port A Overpressurized 2-3-3-1 Travel Alerts Enable 1 Tvl Deviation 2 Tvl Hi Hi 3 Tvl Lo Lo 4 Tvl Hi 5 Tvl Lo 6 Tvl Limit/Cutoff Hi 7 Tvl Limit/Cutoff Lo 2-3-3-2 Travel Alerts NE107 1 Travel Deviation 2 Travel Hi Hi 3 Travel Lo Lo 4 Travel Hi 5 Travel Lo 6 Travel Limit/Cutoff Hi 7 Travel Limit/Cutoff Lo 2-3-3-6 Travel Deviation 1 Travel Deviation 2 Travel Deviation Alert Point 3 Travel Deviation Time 92
B- 9. > /(2-3-7) (2-3-5) Alert Setup 1 Electronics 2 Pressure 3 Travel 4 Travel History 5 Partial Stroke 1 6 Sensors 7 Alert Record/Status 2-3-6 (HC, AD, PD) 2-3-7 (ODV) Alert Record/Status 1 Alert Record/Status Alerts Enable 2 Alert Record/Status Alerts NE107 3 3 View Alert Records 4 Clear Records 5 Instrument Alert Record 6 Edit Instrument Time 2-3-5 (ODV) Partial Stroke 1 Partial Stroke Alerts Enable 2 Partial Stroke Alerts NE107 3 3 Partial Stroke Alerts Shutdown 4 PST Prohibited Alerts Enable 2-3-5-4 (ODV) PST Prohibited Alerts Enable 1 PST Prohibited Electronic Alerts 2 Travel Sensor Failure 3 Pressure Sensor Failure 4 Temp Sensor Failure 5 Pressure Fallback Active 6 Supply Pressure Lo 7 Travel Deviation 2-3-5-1 (ODV) Partial Stroke Alerts Enable 1 PST Abnormal 2 PST Pass 3 PST Prohibited 2-3-5-2 (ODV) Partial Stroke Alerts NE107 1 PST Abnormal 2 PST Pass 3 PST Prohibited 4 Program Flow Failure 2-3-5-3 (ODV) Partial Stroke Alerts Shutdown 1 Program Flow Failure Shutdown 2-3-5-4-1 (ODV) PST Prohibited Electronic Alerts 1 Critical NVM Failure 2 Drive Current Failure 3 Reference Voltage Failure 4 Minor Loop Sensor Failure 5 Flash Integrity Failure 2-3-6-2 (HC, AD, PD) 2-3-7-2 (ODV) Alert Record/Status Alerts NE107 1 Alert Record Not Empty 2 Alert Record Full 3 Instrument Time is Approximate 4 Calibration in Progress 5 Autocal in Progress 6 Diagnostic in Progress 7 Diagnostic Data Avail 8 Integrator Sat Hi 9 Integrator Sat Lo 2-3-6-1 (HC, AD, PD) 2-3-7-1 (ODV) Alert Record/Status Alerts Enable 1 Alert Record Not Empty 2 Alert Record Full 3 Instrument Time is Approximate 4 Calibration in Progress 5 Autocal in Progress 6 Diagnostic in Progress 7 Diagnostic Data Avail 8 Integrator Sat Hi 9 Integrator Sat Lo 2-3-5 (HC, AD, PD) 2-3-6 (ODV) Sensors 1 Sensor Alerts Enable 2 Sensor Alerts NE107 3 3 Sensor Alerts Shutdown 4 Change Travel/Pressure Select 2 5 Travel/Pressure Select 2 6 Fallback Recovery 2 2 2-3-5-4 (HC, AD, PD) 2-3-6-4 (ODV) Change Travel/Pressure Select 1 Travel Control 2 Pressure Control 3 Fallback-Sensor Failure 4 Fallback-Sensor/Tvl Deviation 2-3-5-1 (HC, AD, PD) 2-3-6-1 (ODV) Sensor Alerts Enable 1 Pressure Fallback Active 2-3-5-2 (HC, AD, PD) 2-3-6-2 (ODV) Sensor Alerts NE107 1 Travel Sensor Failure 2 Pressure Sensor Failure 3 Temp Sensor Failure 4 Minor Loop Sensor Failure 5 Pressure Fallback Active 2 2-3-5-3 (HC, AD, PD) 2-3-6-3 (ODV) Sensor Alerts Shutdown 1 Travel Sensor Failure Shutdown 2 Pressure Sensor Failure Shutdown 3 Temp Sensor Failure Shutdown 4 Minor Loop Sensor Failure Shutdown 2 : 1 ODV. 2 AD, PD ODV. 3 NE107 HART 7. HART 5 NE107. 93