DVC6200 Fisher FIELDVUE DVC6200 HC, AD, PD, ODV 09 1, 2 2 2, 3, 4, 5, 6 DD 1, 2, 3, 4, 5 1... 3,,... 3... 3... 3... 3... 5... 5... 8 2... 9... 9 HART... 9... 9... 11... 12... 12 Rosemount 333 HART Tri-Loop HART-... 13 3... 15... 15... 15... 16... 16... 16... 16... 16... 17... 17... 17... 17... 18... 18 W9713 /... 18 /... 18... 19 (EPPC)... 19... 20... 20... 21... 21... 23... 24... 24... 27 /... 27... 28... 30... 33... 33... 33 HART... 34... 34... 35 HART 5 / HART 7... 36 www.fisher.com
DVC6200 () 4... 37... 37... 38... 38... 39... 40... 41... 41... 42... 43... 43... 44 PST (ODV )... 45 5,... 47... 47 1... 47... 47... 48... 48... 48... 48... 49... 50... 51... 51... 52... 52... 52... 52... 53 6... 55... 56... 56... 56... 57... 57... 58... 58 I/P... 59 (PWB)... 61... 63,... 63... 64... 64... 65... 65... 65... 66 DVC6200... 68 7... 69... 69... 69 PWB... 69... 71... 71... 71... 71 I/P... 71... 71... 72... 72,... 72 DVC6215... 72 HART... 72 A... 79 HART... 79 DVC6200... 79 B... 83... 91... 97 2
1,, DVC6200,, DVC6200 (D103556X012). QR. www.fisher.com. DVC6200 (D103556X012).,,,. 475. Fisher ValveLink ValveLink Mobile,. ValveLink ValveLink.,,,, DVC6200,.,,..., Device Setup : Configure > Guided Setup > Device Setup (2 1 1) B. DVC6200 ( 1 1 1 2) -. HART DVC6200.,. 3
1 1. Fisher FIELDVUE DVC6200 1 2. Fisher GX FIELDVUE DVC6200 W9643 W9616 ValveLink AMS : DVC6200.,,,... 1 1. HART. DVC6200. 1 1. (2) HC AD PD ODV X X X X X X X X X X X X X X X X, X X X ( ) X X X X X X - X X X X X X X X X X / (1) 1. Fisher D351146X012. 2. HC = HART Communicating, AD = Advanced Diagnostics, PD = Performance Diagnostics, ODV = Optimized Digital Valve. X 4
1 2.,. DVC6200 1 2.. DVC6200.. Bulletin 62.1:DVC6200 - Fisher FIELDVUE DVC6200 (D103415X012) Bulletin 62.1:DVC6200 HC - Fisher FIELDVUE DVC6200 (D103423X012) Bulletin 62.1:DVC6200(S1) Fisher FIELDUVE DVC6200 (D103543X012) Fisher FIELDVUE DVC6200 (D103556X012) FIELDVUE (D103262X012) Smart HART (HIM) FIELDVUE (D103263X012) Smart Wireless THUMt HART (HIM) FIELDVUE (D103469X012) HART (D103265X012) HART Field - Fisher FIELDVUE DVC6200 (D103639X012) FIELDVUE HART Tri Loop HART- (D103267X012) Lock in Last (D103261X012) Fisher HF340 (D102796X012) 475 ValveLink. www.fisher.com. 5
1 2. DVC6200 DVC6215 : Fisher GX Fisher (linear) - 2 wall mounting DVC6205 ( ) DVC6200 DVC6215 IEC 60534-6-1, IEC 60534-6-2, VDI/VDE 3845 NAMUR. HART 5 HART 7 Point-to-Point:. : 4~20mA DC nominal : 9.5 VDC HART 10 VDC : 4.0mA (w/o Microprocesser Restart): 3.5mA : 30VDC Overcurrent protected, Reverse Polarity protected Multi-drop:. : 10mA 11~30VDC Reverse Polarity protected (1) : 0.3bar(5psig) : 10.0bar(145psig) :. ISA 7.0.01 40. 5. 1ppm(weight (w/w) volume (v/v) basis).. ISO 8573-1 : Class 7 : Class 3 : Class 3 10K, : 0.4bar(6psig) : 9.5bar(140psig) :, (2)(3) : 1.4bar(20psig) : 0.38 normal m 3 /hr(14scfh) 5.5bar(80psig) : 1.3 normal m 3 /hr(49scfh) : 1.4bar(20psig) : 0.056 normal m 3 /hr(2.1scfh) 5.5bar(80psig) : 0.184 normal m 3 /hr(6.9scfh) (2)(3) 1.4bar(20psig) : 10.0 normal m 3 /hr(375scfh) 5.5bar(80psig) : 29.5 normal m 3 /hr(1100scfh) (1)(4) -40 ~ 85 C(-40 ~ 185 F) -52 ~ 85 C(-62 ~ 185 F): (fluorosilicone elastomers) -52 ~ 125 C(-62 ~ 257 F): (5) : ±0.50% EN 61326 1:2013 - EN 61326-1 2. 1 3. - A ISM : 1, A - - 6
1 2. () - 1 3.. ANSI/ISA-S75.13.01 5.3.5. 3. ISA 1/2. (impedance) 500ohm (impedance). 20mA 10V. IEC 61514-2 CSA -,, Division 2, FM -,,, ATEX -,, Type n IECEx -,, Type n CSA - Type 4X, IP66 FM - Type 4X, IP66 ATEX - IP66 IECEx - IP66 /, - CSA, FM, ATEX IECEx(I/O ) - () CUTR - (,, ) INMETRO - National Institute of Metrology, Quality, and Technology( )( ) KGS - () NEPSI - () PESO CCOE - Petroleum and Explosives Safety Organisation - Chief Controller of Explosives( - )() TIIS - (). :67CFR 1/4 NPT(F) : 1/4 NPT(F) : 3/8 : 3/8 NPT(F) : 1/2 NPT M20 (6) ( ) : 6.5mm(0.25) : 606mm(23.875) ( ) : 45 : 90 DVC6200 : 3.5kg(7.7 ) : 8.6kg(19 ) DVC6205: 4.1kg(9 ) DVC6215: 1.4kg(3.1 ), : A03600 (), () : Elastomers: Nitrile() Fluorosilicone( ) (regulator) (7) 4~20mA (8) : 4~20mA, : 8~30VDC : 1% NAMUR NE43. (> 22.5mA) (< 3.6mA). ' '. - - 7
1 2. () () (8) : 1, : 0mA() : 1A : 30VDC : 2% www.fisher.com. SEP Fisher Controls International LLC (PED) 2014 / 68 / EU 3 4. SEP(Sound Engineering Practice) PED CE. CE. : ANSI/ISA 51.1 -. 1. /. 2. Normal m 3 /hour - 0 C 1.01325bar. Scfh - 60 F 14.7psia. 3. 1.4bar(20psig) ; 5.5bar(80psig). 4.. 5. 19mm(0.75) 60.. 6. M20 ATEX. 7. 18 ~ 22AWG 4. 91m(300). 15m(50). 91m. 8.. 1 3. EMC - (1) (ESD) IEC 61000-4-2 4kV 8kV A 80~1000MHz @ 10V/m(80% 1kHz AM) IEC 61000-4-3 1400~2000MHz @ 3V/m(80% 1kHz AM) A 2000~2700MHz @ 1V/m(80% 1kHz AM) IEC 61000-4-8 50/60Hz 30A/m A IEC 61000-4-4 1kV A I/O / IEC 61000-4-5 1kV B RF IEC 61000-4-6 3Vrms 150kHz ~ 80MHz A : +/- 1% 1. A =. B =. DVC6200. Emerson Automation Solutions Educational Services - Registration : +1-641 754 3771 +1-800 338 8158 : education@emerson.com emerson.com/fishervalvetraining 8
2 22 DVC6200. HART HART HART. HART HART. I/O ( 2 1 ). HART HART (impedance). HART HART.. PROVOX, RS3 DeltaV HART. 2 1. HART HART DCS I/O I/O HART 4~20mA + HART Tx Tx A6188-1 DVC6200 10VDC... 9
2 2., THUM.. = [ ( ) ] - [ (HART ) ] - [ ] - [ ]. 10V DC. 2 1. HF340 HART 1000ft Belden 9501 Honeywell TDC2000. = [18.5(21.05mA) ] - [2.3] - [48ohm 0.02105amp] = [18.5] - [2.3] - [1.01] = 15.19 2 2. THUM ( ) + - HART ( ) ( ) R + -. 18.5(21.05mA) - ( ) 1-2.3(HF300 ) - ( ) x - 2.55(121ohm x 0.02105amp) - Smart Wireless THUM ( ) 2 - x - 1.01(1000ft Belden 9501 48ohm x 0.02105amp) = : 1 3 = 15.19, - (2.55).., ( ). 3. 2 3 THUM 3.5mA 2.25 25mA 1.2.. 8.0 ~ 9.5. 10
2 1. (1) pf/ft (1) pf/m (2) Ohm/ft (2) Ohm/m BS5308/1, 0.5 sq mm 61.0 200 0.022 0.074 BS5308/1, 1.0 sq mm 61.0 200 0.012 0.037 BS5308/1, 1.5 sq mm 61.0 200 0.008 0.025 BS5308/2, 0.5 sq mm 121.9 400 0.022 0.074 BS5308/2, 0.75 sq mm 121.9 400 0.016 0.053 BS5308/2, 1.5 sq mm 121.9 400 0.008 0.025 BELDEN 8303, 22 awg 63.0 206.7 0.030 0.098 BELDEN 8441, 22 awg 83.2 273 0.030 0.098 BELDEN 8767, 22 awg 76.8 252 0.030 0.098 BELDEN 8777, 22 awg 54.9 180 0.030 0.098 BELDEN 9501, 24 awg 50.0 164 0.048 0.157 BELDEN 9680, 24 awg 27.5 90.2 0.048 0.157 BELDEN 9729, 24 awg 22.1 72.5 0.048 0.157 BELDEN 9773, 18 awg 54.9 180 0.012 0.042 BELDEN 9829, 24 awg 27.1 88.9 0.048 0.157 BELDEN 9873, 20 awg 54.9 180 0.020 0.069 1... 2... 1. 2 3. 2 3. 1k (POTENTIOMETER) A6192-1 2.. 3. 2 3 1k (potentiometer). 4.... 11
ODV DVC6200. DVC6200.. 100,000pF.,. :. 100,000pF...,. - 18AWG,. Nom. Capacitance Conductor to Conductor @ 1KHz: 26pF/ft Nom. Conductor DC Resistance @ 20 Deg. C: 5.96Ohms/1,000ft Max. Operating Voltage - UL 200V RMS (PLTC, CMG),150V RMS (ITC) Allowable Length with this cable = 100,000pF /(26pF/ft) = 3,846 ft - 18AWG,. Nom. Characteristic Impedance: 29Ohms Nom. Inductance:.15μH/ft Nom. Capacitance Conductor to Conductor @ 1KHz: 51pF/ft Nom. Cap. Cond. to other Cond. & Shield @ 1KHz 97pF/ft Allowable Length with this cable = 100,000pF /(97pF/ft) = 1,030ft AUX 1mA 5V... HART.. (ft) = [160,000 - C (pf)] [C (pf/ft)] (m) = [160,000 - C (pf)] [C (pf/m)] : 160,000 = HART RC HART 65μs FIELDVUE. C = HART C = ( 2 1 ) 12
C 50,000pF Belden 9501 50pF/ft Foxboro I/A (1988). (ft) = [160,000-50,000pF] [50pF/ft] = 2,200ft HART... Rosemount 333 HART Tri-Loop HART- DVC6200 333 HART Tri-Loop HART-,, 4~20mA. HART Tri-Loop 4~20mA. 2 4. 333 HART Tri Loop HART to Analog. 2 4. HART Tri-Loop HART Tri-Loop. HART Tri-Loop. HART Tri-Loop. HART Tri-Loop. HART Tri-Loop DIN. HART Tri-Loop.?. HART Tri-Loop.? HART Tri-Loop... HART Tri-Loop 1. ()HART Tri-Loop 2 3. E0365 13
HART Tri-Loop 333 HART Tri-Loop 3. HART Tri-Loop HART-. HART Tri-Loop 4 ~ 20mA. 1 ( ), 2 ( ), 3 ( ) 4 ( ). HART Tri-Loop DVC6200. DVC6200 HART 5. With I/O Package Configure > Manual Setup > Outputs > Burst Mode (2 2 6 5) HC, AD, PD or (2-2-7-5) ODV Without I/O Package Configure > Manual Setup > Outputs > Burst Mode (2 2 6 2) HC, AD, PD or (2-2-7-2) ODV. /PV/SV/TV/QV. HART With I/O Package Configure > Manual Setup > Outputs > HART Variable Assignments (2-2-6-4) HC, AD, PD or (2-2-7-4) ODV Without I/O Package Configure > Manual Setup > Outputs > HART Variable Assignments (2-2-6-1) HC, AD, PD or (2-2-7-1) ODV HART. 1 (PV). 2 (SV), 3 (TV) 4 (QV). ( ) A B A-B. 14
3 Configure > Guided Setup (2 1). -. ( AD, PD, ODV) -. 26. / ( HC) -. 26. 33. 3 1.,,,.. 3 1. (1) 4mA 20mA ma 0 3 Cmd 3( ) A-B 125% -25% / 99.46% / 0.50% ( ) 0%/ 0%/ 0 9.4 / 0.26% - - 15
3 1. () (1) 5% 9.99 5psi (2) 5.0 1.. DVC6200.. 2. bar, kpa Kg/cm 2. Configure > Manual Setup > Mode and Protection (2 2 1) DVC6200. 4~20mA... DVC6200..... ( ). Configure > Manual Setup > Instrument (2 2 2). HART - 8. HART. HART.. HART (HART Universal 7 ) - 32. 16
- 16. HART. - 32.. - point-to-point 0.. HART 7 0 ~ 63, HART 5 0 ~ 15.. 0. - 12. - 12. - psi, bar, kpa kg/cm 2. -.. - ma 4~20mA. (CAL) -. 3 ~ 10... 1.. - (+) (-). 3 ~ 10. ODV. Hi -... 3 1. 17
Lo -... 3 1. 3 1. ZPC = ZPC =, % : ZPC = A6531-1 ma 4~20mA % DVC6200.. 24. / Configure > Manual Setup > Travel/Pressure Control (2 2-3) /. 4. -.. -.. - -. 18
-/ -. /. Hi / - Hi / Hi 123%. Hi / Hi. Hi / -. Hi 99.5%. 125% Hi /. Lo / - Lo / Lo -23%. Hi / Lo. Lo / -. Lo 0.5%. -25% Lo /. (EPPC) ODV. EPPC -.. (), ( )..... 19
EPPC -... ( ).. 95%.. EPPC -. 45. -. 100% 0%. Lo. Lo -. 0% 100%. Hi. AD, PD, ODV. -. - ( ). -. ( ). 20
-. Point-to-Point 4~20mA. Multidrop 24VDC...... -. - ( : ).,... 0% 0%. 0% 100%... 3 2 3. 3 2. 21. ( %) ( %). -6.25% ~ 106.25%... (1 ~ 21),. Enter. 0.. (equal percentage), ( ). ( : ). 21
3 2. ( = ) 125 125 100 100, %, % 0 0-25 -25, % -25 0 100 125-25 0, % 100 125 = = (equal percentage) 125 100, % 0 A6535-1 -25-25 0, % 100 125 = 22
SP - ( %). 0. 2, 3, 4 0. SP - ( %). 0. 2, 3, 4 0. ( ) - ( ). 0.2~10.0. 0.0. 2, 3, 4 0. ( ) HC, AD PD. / - ODV -. -. -. /(lead and lag) ODV. ( ) -..,.. -. -. ( ). -. / 1.0 -. - 3 2. 3 2. ODV /. 0.0 -. 0.2 /. 2.0 /. 2.0 - -. 23
Configure > Manual Setup > Tuning (2 2-4) /.,. 11.. C M. 3 3,. 3 3. C D E F G H I J K L M 4.4 4.8 5.5 6.2 7.2 8.4 9.7 11.3 13.1 15.5 18.0 3.0 3.0 3.0 3.1 3.6 4.2 4.85 5.65 6.0 6.0 6.0 35 35 35 35 34 31 27 23 18 12 12 X(),. / X().. /. 3 4 Fisher Baumann.... 24
3 4. Fisher 585C 585CR 657 667 1051 1052 1061 1066SR 2052 3024C 25 50 60 68, 80 100, 130 30 34, 40 45, 50 46, 60, 70, 76 80~100 30 34, 40 45, 50 46, 60, 70, 76 80~100 20, 30 33 40 60, 70 30 40 60 68, 80, 100, 130 20 27, 75 1 2 3 30, 30E 34, 34E, 40, 40E 45, 45E ( ).. ( ) ( ) ( ) ( ) E I J L M H K L 225 X (1) GX 750 K 1200 M 16 C 32 E 54 H Baumann 10 E 25 H 54 J : ( ) 3 6. 1. X =. = 4.2; = 3.0; = 18.0 2.. 3. A C B. M H K L M H I K M J K L M G L H J M E H K (2) A C (3). A B C D P o ( ): P s ( ): -.. -.. 25
MLFB -.. -... -... AD, PD ODV.. Fisher.. 3 ~ 5. / /.. /... ( : F E ).. ( : F G ).... 26
12.. C M. B. 3 5, (integrator). 3 5. B C D E F G H I J K L M 0.5 2.2 2.4 2.8 3.1 3.6 4.2 4.8 5.6 6.6 7.8 9.0 0.3 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 35 35 35 35 35 34 31 27 23 18 12 12 X(),. X().. /. -.. MLFB -.. (integral) -. (integral). (integral). (integral) - (integral) ( ) (integral).. / (integral) - (integral) 1. (integrator) 1. 0% ~ 2% 1 0% ~ +/-2%. 0.25%. 27
(integrator) - (integrator) (integrator). I/P 0 ~ 100%. Configure > Manual Setup > Valve and Actuator (2 2 5) -,. -,,,. - 3 6.. 60%... (DVC6200 )... 3 6. mm SStem 7 4.2~7 0.17~0.28 - SStem 19 8~19 0.32~0.75 - SStem 25 20~25 0.76~1.00 - SStem 38 26~38 1.01~1.50 - SStem 50 39~50 1.51~2.00 - SStem 110 51~110 2.01~4.125 - SStem 210 110~210 4.125~8.25 SStem 1 >210 >8.25 60~90 RShaft 1 - - 60~90 RShaft 2 - - 60~90 RShaft - - 60~90-3. :. A = B =, C =, :. Lo :. 28
- ( ). (ZPC) 3 3. 3 3. A B ( A C) ( A) ( B) A 0. A 0. B. B... / /..... A C : A CW/To Bottom Inst. CCW/To Top Inst. B : B CW/To Bottom Inst. CCW/To Top Inst.. 29
(PST) ( ODV ) Configure > Manual Setup > Partial Stroke (2-2-6) ODV. (PST) PST -. DVC6200 ( ).. -.. - ( : = = ).. A C A- B B B- A B B C A ValveLink.. 1. ValveLink DVC6200. 2.. -125% - - 3 7 30
3 7. ( ) 0.0 Psupply A C Psupply 0.0 Psupply 0.0 B 0.0 Psupply A -Psupply Psupply Psupply -Psupply 3.. 4. / ( 3 4, ). (Pmin). (Pmax).. 3 8. 3 8. PST (1) A C B Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmin - 0.25 * ( - ) Pmax + 0.25 * ( - ) A C B 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) Pmax + 0.5 * (Psupply - Pmax) 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) 0.5 * Pmin 0.5 * Pmin Pmax + 0.5 * (Psupply - Pmax) A Pmin - 0.5 * (Psupply + Pmin) Pmax + 0.5 * (Psupply - Pmax) Pmax + 0.5 * (Psupply - Pmax) Pmin - 0.5 * (Psupply + Pmin) 5.. -1.5x. -. - 3 8. 31
PST -.. PST -.... PST - PST. -. 10%. -. 0.25%/. -. 5. 3 4.,,, (%) (%) 105.0 100.0 95.0 (%/SEC.) ( ) 90.0 85.0 (SEC.) 0.0 10.0 15.0 20.0 25.0 30.0 35.0 10.0 8.0 6.0 4.0 2.0 0.0-2.0-4.0-6.0 ( ) ( ) (%) -8.0-10.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 60.0 50.0 ( ) ( ) 40.0 (Pmin) (%) 30.0 20.0 10.0 0.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 ( ) 32
Configure > Manual Setup > Outputs (2-2-6) HC, AD, PD or (2-2-7) ODV 4~20mA. -. -. - 0 ~ 100% 4~20mA. - 0 ~ 100% ( 1A). - ( 1A). -.. (< 3.6mA). (> 22.5mA)... 4~20mA. -. -.. -. / /. 33
HART 4 HART. 1. 3. 1 (PV) 2 (SV) 3 (TV) 4 (QV),, A, B, A-B,,,, A, B, A-B,,,, A, B, A-B,, 4~20mA.. 4mA = 4mA =.. (HART ). HART Universal 5. -. - HART.. Tri-Loop. - ( 1) - / ( 2) - /PV/SV/TV/QV( 3) HART /...,... 34
Configure > Alert Setup (2 3). 3 3. 3 9.,,.... HART. 5. 3 9. NVM NVM (1) (1) / / (Integrator) (Integrator) (Accumulator) 1. AD, PD ODV. 35
HART 5 / HART 7 Service Tool > Maintenance > Change to HART 5 / Change to HART 7 (3-5-3) HC or (3-5-4) AD, PD or (3-5-5) ODV. HART.. HART Universal 5 HART Universal 7 ( ). HART Universal 7.. 36
4 44 DVC6200.. > > >. Configure > Calibration (2-4) - 38-39 - 40-41 - 42-43 PST (ODV ) - 45..... 37
.. 43. 1... (MLFB)., 0 100%. MLFB. 2.. 4 1. 4 1... 3.8mA. 4.0mA.. 1.. > > > / ( ). 2.. > > > / ( ). 0?. (I/P ). 0. 1. ( ). 2.. 1. ( ). 2.. 38
. - 4~20mA. - 4~20mA. LOOP + LOOP -. 4~20mA.. 0% = 100% = 1... 2 ~ 7. 2. 0%,. 3. 100%,. 4. 0%,. 5. 100%,. 6. 5%,. 7. 95%,. 8.. LOOP + LOOP -. 4 ~ 20mA.. 1... 0% = 100% = 39
2. 0%.,, 10.0%, 1.0%, 0.1%. 2. 3. 3. 100%. 3. 4. 4. 0%. 4. 5. 5. 100%. 5. 6. 6. 5%. 6. 7. 7. 95%. 7. 8. 8... 3 ~ 10... 1.. > >. ( ). I/P.. ValveLink. 40
... A B.. 1... 2. 0.. x.. 3... 4..,, 3.0psi/0.207bar/20.7kPa, 0.30psi/0.0207bar/2.07kPa 0.03psi/0.00207bar/0.207kPa. (4). 5. 5... x.. 6... 7.. (7). 8. 8.. 41
HC.... 1. a) b) ( ). a... 5. b..... 2. 2.... 3.. 4..,, 3.0psi/0.207bar/20.7kPa, 0.30psi/0.0207bar/2.07kPa 0.03psi/0.00207bar/0.207kPa. 5. 5.. LOOP + LOOP -. 4 ~ 20mA.. 1.... 2... 42
. 3... 4..,, 0.4mA, 0.04mA 0.004mA. (4). 5. 5.... 6.... 7... 8.. (8). 9. 9.... B C. A... 50 ~ 70% 4 1.. ( 30 ). 2. 43
4 1. A ( (shroud) ) : : : W9034 A. 4 1.. ODV : ISA 7.0.01.. C. C. B. B. 44
PST (ODV ).,,.,... 45
46
, 5, 55 Overview (1) 1. ( / ) ( HC ) /. ( 5 1 ) ID( ), DD HART Universal ( / ) 5 1. HC AD PD ODV ValveLink., HC,, (,, ), ValveLink Solo ;,,,,. (ValveLink ) (,, ). / (, ). /. 47
, Service Tools (3).. DVC6200 20... >. / -. Enter. - I/P. I/P. I/P. I/P. -.. : < 10% > 3% > 90% < 97% : < 10% < 97% > 90% > 3% NVM - NVM( )... NVM - NVM... - ROM( )... -.. 48
, - 1 (,, ).. -,. -. - -25.0 ~ 125.0%.... - -60 ~ 100 C(-76 ~ 212 F).... - 3 60-24.0 ~ 125.0%. O-.. -.. -. 4~20mA.. 24mA. -.. DIP OUT.. -.. -. Lo AD, PD ODV. 49
, Hi, Lo, Hi Hi Lo Lo. -.. Hi - Hi. Hi. 5 1. 5 1. A6532 Hi Hi - Hi Hi. Hi Hi. Lo - Lo. Lo. Lo Lo - Lo Lo. Lo Lo. / Hi - Hi /. / Lo - Lo /. Integrator Saturated -. Integrator Saturated -. - I/P. 50
, -... (accumulator) - (accumulator) (accumulator). (accumulator). (accumulator). / (accumulator) (accumulator). (%).. ( ). 5 2. 5 2. (accumulator) (10% ), (+/- 5%) E1473-1. -.. 51
, -. -. -. -. - I/P ( ).. -.. - 1.0%/. - 1.0%/. - 1.0%/. -. ODV. ODV DVC6200.... 1 30% 0.1%. ValveLink., 10%, (). 30%... 4 20mA(point-to-point ). 4mA. 52
, ( ), ValveLink. () DVC6200... +/-. 3 ~ 5. 1. ValveLink. 1. LOOP. 2.. 3. > >. 4. (10%). 30%. 5.,... 0.25%/. 6.. 7.... Service Tools > Variables (3-4).. ( / ) ( / ) ( ) (accumulator) ( HC ) 53
, / ( ) ( ) ( ) 54
6 66 DVC6200 Type 4X IP66. DVC6200 ( 52).. /........ DVC6200 :,..,................ 55
.... 1 2. DVC6200 ValveLink.. ValveLink ValveLink.. 1.. 2.. 3.. 4.. 5. DVC6200 DVC6215. 6.. (D103556X012).. I/P,.. 6 1 DVC6200. 6 1., 5mm 1.5mm 2.5mm 6mm I/P 56
DVC6200.. 7 2 7 4.. 1. ( 43) 4 ( 2). 2. 6mm 3 ( 38). ( 154). 2.. 3. ( 1).. 4. / 6 1, 2.. 6 1. W9924-1_ 57
7 2 7 4.. PWB...,... 1. ( 237) ( 1). O- ( 12). 2. PWB ( 50).. 3. ( 2) ( 1). 4. 3 ( 38). 3 ( 154). 16N m(138lbf ). /,. 5 /. 5. ( 43). DVC6200 I/P, PWB.... I/P. I/P. 58
I/P 7 2 7 4. I/P ( 41). I/P. I/P I/P 2.. 1. I/P I/P ( 41) ( 169). 2. ( 231). 3. 6 2. 6 2. I/P W8072 I/P O- I/P () 4. I/P O- ( 39). 5. I/P I/P ( 41) ( 169). I/P 1. ( 43). 2. 6 3. 2.5mm ( 169) I/P ( 41) ( 2) 4 ( 23). 3. ( 169) I/P ( 41) ( 2). I/P 2. 59
4. O- ( 39) ( 231) I/P ( 41). I/P 1. 6 2. ( 2) O- ( 39) ( 231).. O-. 2. 6 3 2 ( 210). 6 3. I/P ( 169) I/P ( 41) (4) ( 23) W9328 ( 210) 3. 2 I/P ( 41) ( 2).. 4. ( 169) I/P ( 41). 5. 4 ( 23) 1.6N m(14lbf ). 6. I/P. 60
(PWB) 7 2 7 4. PWB ( 50) ( 2). PWB. 1.. 2. 3 ( 33). 3. PWB ( 50) ( 2). 4. PWB ( 50) O- ( 40) ( 2). DIP 1. O- ( 40). 2. PWB ( 50). I/P ( 41) 2 PWB (receptacles) PWB (receptacles). 3. PWB ( 50). 4. 3 ( 33) 1N m(10.1lbf ). 5. 6 2 PWB DIP. 6 2. DIP (1) DIP PT-PT 4 20mA Point to Point 24VDC Multi Drop 1. 6 4. 61
6 4. (PWB) X0463 / X0432 4 ~ 20mA DIP point-to-point. 6.. 7.. 62
7 2 7 4. ( 24).. 1. ( 24) 4.. 2.. 1... 2. 6 5.. 6 5. W8074 3. ( ). 2N m(20.7lbf ) 4. 4.. 5.., DVC6200 DVC6205 ( 47), ( 66) ( 67). ( 236, 7 3).. 63
,. 7 2 7 3. 1. ( 43). 2.,. ( 47)... ( 66) ( 67). 3., ( 64). 4.,. 7 2 7 4.. DVC6205 ( 6 6 ).. 6 6.. X0338 DVC6200 X0379 DVC6205. 1. ( 4) ( 58). 2. ( 4). 64
3.. 4. PWB ( 50). 5. ( 72).. O-. 1. O- ( 34), O-. 2.. ( 72). ( 72). 3. PWB ( 50).. 4.. 5. 2. 6. O- ( 36), 2-5/8 O-. O-. 7. ( 63) 2-5/8. 8. ( 4). 9. ( 58) ( 4). (1 ). ( 58). 6 3. 68 DVC6200... 1. 2 3 FIELDVUE. 2.. 3. 2 3 1 (potentiometer) 0. 4.. 65
5. 10.0 1 (potentiometer). 6.. 7. 6 4 (± 0.08mA). 8...... 6 3. 1.. 1a.. 1a..... 1b.. 1b. ( ). 1c.. 1c. ( ). 1d.. 1d. ( ). 1e.. 1e.... 2.. 2a.. 2a. ( ). 10VDC. 2b. (impedance). 2b. HART ( ). 2c.. 2c. ( ). 2d. HART. 2d. ( HART ). 2e.. 2e... 2f. 4mA. 2f.. 3.8mA. 2g. PWB. 2g.. 2h. PWB DIP. 2h. PWB DIP. PWB. 6 2. 66
6 3. 2.. 2j. PWB. 2j. 4~20mA. LOOP+ LOOP- 8.0 ~ 9.5VDC. 8.0 ~ 9.5VDC PWB. 3.,,. 4. ValveLink. 5.. 2k.. 2k. ( ). > >. 0. 2l.. 2l. PWB.. 2m. ValveLink. 2m.. 2n. ValveLink PC. 2n. ValveLink. 2p. ValveLink. 2p.. 3a.. 3a.... ( ) ( ) 3b. I/P. 3b. I/P.. I/P I/P. 3c. I/P O-. 3c. O-. 3d. I/P //. 3d., ( ),,. 1680 ~ 1860ohm. I/P. 3e. I/P. 3e. I/P. ( 55 ~ 80%, 60 ~ 85%). I/P. 3f.. 3f... 3g.. 3g... I/P.. 3h. 67CFR,. 3h. 67CFR. 4a.. 4a. PWB. 4b. O-. 4b. O-. 5a.. 5a.. :... 67
DVC6200. 1. 2.?. 3. 4.0mA 20.0mA Loop - Loop + : 4.0mA V, 20.0mA V. ( 4.0mA 8.6V 20mA 8.8V ). 4. HART? 5.? AC HC AD PD ODV 6.? 7.? 8.? 9.? 10.? 11.? % A B % 12.? % 13. (, ) ValveLink ( ). 1.? DVC6200 DVC6205/DVC6215 2. DVC6200,,? 3.? 4.? 5. LBP/. 6.? 7.? 68
7 77. Fisher. Fisher.. 1* Elastomer Spare Parts Kit (kit contains parts to service one digital valve controller) Standard Extreme Temperature option (fluorosilicone elastomers) 19B5402X012 19B5402X022 2* Small Hardware Spare Parts Kit (kit contains parts to service one digital valve controller) 19B5403X012 Aluminum, with I/O Package Standard 19B5401X182 Standard, M20 19B5401X392 Extreme Temperature 19B5401X192 Extreme Temperature, M20 19B5401X402 Stainless Steel, without I/O Package Extreme Temperature, Natural Gas Certified 19B5401X312 Extreme Temperature, Natural Gas Certified, M20 19B5401X382 3* Seal Screen Kit [kit contains 25 seal screens (key 231) and 25 O-rings (key 39)] Standard and Extreme Temperature option (fluorosilicone elastomers) 14B5072X182 Stainless Steel, with I/O Package Extreme Temperature Extreme Temperature, M20 19B5401X202 19B5401X412 4* Terminal Box Kit (see figure 7 1) 50 PWB Assembly (HW2) (see figure 7 2 and 7 4) for DVC6200 and DVC6205. PWB 2(HW2). (nitrile elastomer), (fluorosilicone elastomer). Aluminum, without I/O Package Standard 19B5401X142 Standard, M20 19B5401X342 Standard, Natural Gas Certified 19B5401X162 Standard, Natural Gas Certified, M20 19B5401X362 Extreme Temperature 19B5401X152 Extreme Temperature, M20 19B5401X352 Extreme Temperature, Natural Gas Certified 19B5401X172 Extreme Temperature, Natural Gas Certified, M20 19B5401X372 PWB 7 1. PWB. Hardware Revision 2 (HW2), without I/O Package For instrument level HC For instrument level AD For instrument level PD For instrument level ODV Hardware Revision 2 (HW2), with I/O Package For instrument level HC For instrument level AD For instrument level PD For instrument level ODV * 69
7 1. /.. I/O I/O 9 Remote Mount Feedback Unit Kit (see figure 7 5) [remote housing assembly (key25); hex socket set screw (key 58); 1/2 NPT pipe plug (key 62); wire retainer, qty 2 (key 131); terminal cover (key 255); o-ring (key 256); gasket (Housing A only, used for GX actuator) (key 287); seal (Housing A only, used for GX actuator) (key 288) 10 Feedback Array Kit 5* I/P Converter Kit Standard For Extreme Temperature option (fluorosilicone elastomers) 38B6041X152 38B6041X132 6* Spare Module Base Assembly Kit, aluminum [kit contains module base (key 2); drive screws, qty. 2, (key 11); shield/label (key 19); hex socket cap screw, qty. 3, (key 38); self tapping screw, qty. 2 (key 49); pipe plug, qty. 3 (key 61); retaining ring, qty. 3 (key 154); screen (key 236); and flame arrestors, qty. 3 (key 243)] Aluminum GE18654X012 Stainless Steel GE18654X022 7* Spare Housing Assembly Kit [kit contains housing (key 1); vent assembly (key 52); seal (only included in Housing A kits) (key 288); seal (key 237); O-ring (key 34); O-ring (only used with integrally mounted regulator) (key 5)] Aluminum Housing A (used for GX actuator) Standard (nitrile elastomers) Extreme Temperature option (fluorosilicone elastomers) Housing B (used for all actuators except GX) Standard (nitrile elastomers) Extreme Temperature option (fluorosilicone elastomers) Stainless Steel Housing B (used for all actuators except GX) Extreme Temperature option (fluorosilicone elastomers) 8* Spare I/P Shroud Kit [kit contains shroud (key 169) and hex socket cap screw, qty. 4 (key 23)] GE48798X032 GE48798X042 GE48798X072 GE48798X082 GE48798X102 GE29183X012 Sliding Stem (Linear) [kit contains feedback array and hex socket cap screws, qty. 2, washer, plain, qty. 2, external tooth lock washer, qty. 2 (only with aluminum feedback array kit) and alignment template. 210 mm (8-1/4 inch) kit contains feedback array and hex socket cap screws, qty. 4, washer, plain, qty. 4, external tooth lock washer, qty. 4 (only with aluminum feedback array kit), alignment template and insert]. Stainless steel kits only for use with stainless steel mounting kits. 7 mm (1/4-inch) Aluminum GG20240X012 19 mm (3/4-inch) Aluminum GG20240X022 Stainless steel GE65853X012 25 mm (1-inch) Aluminum GG20240X032 Stainless steel GE65853X022 38 mm (1-1/2 inch) Aluminum GG20240X042 Stainless steel GE65853X032 50 mm (2-inch) Aluminum GG20240X052 Stainless steel GE65853X042 110 mm (4-1/8 inch) Aluminum GG20240X082 Stainless steel GE65853X062 210 mm (8-1/4 inch) Aluminum GG20243X012 Stainless steel GE65853X072 Rotary [Kit contains feedback assembly, pointer assembly, travel indicator scale and M3 machine pan head screws qty. 2]. Stainless steel kits only for use with stainless steel mounting kits. Aluminum GE71982X012 Stainless steel GE71982X022 11 Mounting Shield Kit [kit contains shield, qty. 3 and machine screws, qty. 6] 12* Gasket/Seal Kit, for use with GX actuator [kit contains insulating gasket (key 287) and seal (key 288)] GG05242X022 GE45468X012 70 *
... ( 7 2 7 4 ) DVC6200 DVC6205 1 Housing (7) 11 Drive Screw (2 req'd) (DVC6205 only) 20 Shield (DVC6205 only) 52 Vent, plastic (2) 74 Mounting Bracket (DVC6205 only) 248 Screw, hex head (4 req'd) (DVC6205 only) 249 Screw, hex head (4 req'd) (DVC6205 only) 250 Spacer (4 req'd) (DVC6205 only) 267 Standoff (2 req'd) (DVC6205 only) 271 Screen (7) 287 Gasket, Housing A only (used for GX actuator) (DVC6200 only) 288 Seal, Housing A only (used for GX actuator) (DVC6200 only) ( 7 2, 7 3 7 4 ) 63 Lithium grease (not furnished with the instrument) 64 Pipe thread sealant (not furnished with the instrument) 65 Lubricant, silicone sealant (not furnished with the instrument) 154 Retaining Ring (2) (3 req'd) 236 Screen (required for relay B and C only) (7) 237 Module Base Seal (1) ( 7 2 7 4 ) DVC6200 DVC6205 2 Module Base (6) 11 Drive Screw (6) (2 req'd) 12 O-ring (1) 19 Shield (6) 61 Pipe Plug, hex socket (6) (3 req'd) 243 Slotted Pin (flame arrestor) (6) (3 req'd) I/P ( 7 2 7 4 ) DVC6200 DVC6205 23 Cap Screw, hex socket, SST (2)(8) (4 req'd) 39* O-ring (1)(3)(5) 41 I/P Converter (5) 169 Shroud (5)(8) (see figure 6 3) 210* Boot, nitrile (1)(5) (2 req'd) (see figure 6 3) 231* Seal Screen (1)(3)(5) ( 7 2 7 4 ) DVC6200 DVC6205 24* Relay Assembly, (includes shroud, relay seal, mounting screws) DVC6200 DVC6205 16* O-ring (1) (3 req'd) 29 Warning label, for use only with LCIE hazardous area classifications 33 Mach Screw, pan head, SST (2) (3 req'd) 38 Cap Screw, hex socket, SST (2)(6) (3 req'd) 43* Cover Assembly (includes cover screws) Standard 38B9580X022 Extreme temperature option (fluorosilicone elastomers) 38B9580X032 48 Nameplate 49 Screw, self tapping (2 req'd) (6) 61 Pipe Plug, hex socket (6) Housing A with relay C (2 req'd ) (used for GX actuator) Housing A with relay B (1 req'd) (used for GX actuator) Housing B with relay B and C (1 req'd) (used for all actuators except GX) Not required for relay A Standard (nitrile elastomers) Standard Bleed Housing A (used for GX actuator) Single-acting direct (relay C) Single-acting reverse (relay B) Housing B (used for all actuators except GX) Single-acting direct (relay C) Double-acting (relay A) Single-acting reverse (relay B) Low Bleed Housing A (used for GX actuator) Single-acting direct (relay C) Single-acting reverse (relay B) Housing B (used for all actuators except G) Single-acting direct (relay C) Double-acting (relay A) Single-acting reverse (relay B) 38B5786X182 38B5786X172 38B5786X132 38B5786X052 38B5786X092 38B5786X202 38B5786X192 38B5786X152 38B5786X072 38B5786X112 * 1. Elastomer 2. 3. 5. I/P 6. 7. 8. 71
24* Relay Assembly, (includes shroud, relay seal, mounting screws) (continued) Extreme Temperature option (fluorosilicone elastomers) Standard Bleed Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) 38B5786X142 38B5786X032 38B5786X102, ( 7 3 ) DVC6200 DVC6205 Low Bleed Single acting direct (relay C) Double acting (relay A) Single acting reverse (relay B) ( 7 2 7 4 ) DVC6200 DVC6205 4 Terminal Box Cap 34* O-ring (1)(4) 36* O-ring (1)(4) 58 Set Screw, hex socket, SST (2) 72 Cap Screw, hex socket, SST (2) 164 Terminal Box Assembly ( 7 4 ) DVC6205 4 Terminal Box Cap 34* O-ring (1)(4) 36* O-ring (1)(4) 58 Set Screw, hex socket, SST (2) 62 Pipe Plug, hex hd, SST 262 Adapter 263* O-ring Standard or Extreme temperature option 38B5786X162 38B5786X082 38B5786X122 47* Pressure Gauge, nickel-plated brass case, brass connection Double-acting (3 req'd); Single-acting (2 req'd) PSI/MPA Gauge Scale To 60 PSI, 0.4 MPa To 160 PSI, 1.1 MPa PSI/bar Gauge Scale To 60 PSI, 4 bar To 160 PSI, 11 bar PSI/KG/CM 2 Gauge Scale To 60 PSI, 4 KG/CM 2 To 160 PSI, 11 KG/CM 2 66 Pipe Plug, hex head For double-acting and single-acting direct w/gauges (none req'd) For single-acting reverse w/gauges (1 req'd) For all units w/o gauges (3 req'd) 67 Tire Valve, used with Tire Valve Option only Double-acting (3 req'd); Single-acting (2 req'd) DVC6215 ( 7 5 ) 65 Lubricant, silicone sealant (not furnished with the instrument) 256* O-Ring, fluorosilicone HART HF340, DIN rail mount HF341, DIN rail Mount, pass through (no filter) 39B5411X022 39B5412X012 * 1. Elastomer 2. 4. 72
7 2. FIELDVUE DVC6200 A - (GX ) B - (GX ), O- GE40185 1 / 3 73
7 2. FIELDVUE DVC6200 () C-C 2 : 1 A-A E-E 2 : 1, O- F-F 2 : 1 GE40185 2 / 3 7 3. 47 66 47 67, O- GE40185 3 / 3 74
7 4. FIELDVUE DVC6205 B-B A-A, O- H-H GE40181 75
7 4. FIELDVUE DVC6205 () C-C 2 : 1 E-E 2 : 1, O- GE40181 76
7 4. FIELDVUE DVC6205 () GE40181, O- 77
7 5. FIELDVUE DVC6215 : 158 A-A / GE46670-B A (GX ) : 158 A-A / GE40178-B B (GX ) 78
A AA-A HART HART(Highway Addressable Remote Transducer). 4~20mA 2.. HART,.. HART FSK(, frequency shift keying). 1200 2200Hz 4~20mA. 1 0 ( A 1 ). 4~20mA. HART 0 4~20mA DC.. A 1. HART +0.5V 0-0.5V 1,200Hz 1 2,200Hz 0 = 0 A6174 HART., (custody transfer). DIP 6 2. DVC6200 DVC6200,,. I/P, (pwb). (MLFB).. A 3 A 4. 79
A 2. ValveLink FIELDVUE HART E1362 DVC6200.., I/P. I/P I/P. I/P. I/P.. (4 ~ 20mA ), A B. A. B. A 3 A... I/P.. I/P I/P. A B.. I/P.. 80
A 3. FIELDVUE DVC6200 4~20mA + HART A I/P B E1361 A 4. FIELDVUE DVC6200 I/P W9925-2 81
82
B HC, AD, PD ODV. / /. ( B-2 ). HC, AD, PD ODV / Actual Travel( ) B-5 Actuator Manufacturer( ) B-5 Actuator Model( ) B-5 Actuator Selection( ) B-5 Actuator Size( ) B-5 Actuator Style( ) B-7 Air() B-5 Alert Record Full Enable ( ) B-8 Alert Record Not Empty Enable ( ) B-8 Alert Switch Source( ) B-7 Analog Input( ) B-3, B-10 Analog Input (Calibration)( ()) B-9 Analog Input Units( ) B-5 Area Units( ) B-5 Auto Calibration( ) B-9 Auxiliary Terminal Action( ) B-5 Auxiliary Terminal Action, Edit (, ) B-5 Breakout Torque( ) B-5 Burst Mode( ) B-7 Calibration Button( ) B-5 Calibration Record( ) B-9 Calibration Time( ) B-9 Calibration Type( ) B-9 Calibrator( ) B-9 Change Control Mode( ) B-6, B-10 Change Instrument Mode( ) B-1, B-5 Change to HART 5(HART 5 ) B-10 Change to HART 7(HART 7 ) B-10 Change Write Protection( ) B-1, B-3, B-5 Clear Records( ) B-8, B-10 Control Mode( ) B-6, B-10 Critical NVM Failure Shutdown ( NVM ) B-8 Custom Characterization( ) B-6, B-10 Cycle Count Alert Enable ( ) B-8 Cycle Count Alert Point( ) B-8 Cycle Counter( ) B-10 Cycle Count/Travel Accum Deadband ( / ) B-8 Days Powered Up( ) B-10 DD Information(DD ) B-3 Description() B-3, B-5 Device ID( ID) B-3 Device Revision( ) B-3 Device Setup( ) B-4 Device Status( ) B-3, B-10 Drive Current Failure Shutdown ( ) B-8 Drive Signal( ) B-10 / Drive Signal Alert Enable ( ) B-8 Dynamic Torque( ) B-5 Edit Cycle Counts( ) B-8 Edit Instrument Time( ) B-5, B-8 Edit Travel Accumulator( ) B-8 Effective Area (Actuator)( ( )) B-5 End Point Pressure Control (EPPC) ( (EPPC)) B-6 EPPC Deviation (Alert Setup) (EPPC ( )) B-8 Fail Signal( ) B-7 Fallback Recovery( ) B-6, B-8, B-10 Feedback Connection( ) B-7 Firmware Revision( ) B-3 Flash Integrity Failure Shutdown ( ) B-8 Flow Direction( ) B-5 Flow Tends to( ) B-5 Function() B-7 Hardware Revision (Device)( ()) B-3 HART Long Tag(HART ) B-3, B-5 HART Tag(HART ) B-3, B-5 HART Universal Revision(HART Universal ) B-3 Hi Limit/Cutoff Point(Hi / ) B-6, B-8 Hi Limit/Cutoff Select(Hi / ) B-6, B-8 HART Variable Assignments(HART ) B-7 Inlet Pressure( ) B-5 Input Characterization( ) B-6, B-10 Input Range Hi( Hi) B-5 Input Range Lo( Lo) B-5 Instrument Alert Record( ) B-8 Instrument Level( ) B-3 Instrument Mode( ) B-1, B-5 Instrument Serial Number( ) B-3, B-5 Instrument Time is Approximate Enable ( ) B-8 Integral Enable( ) B-7 Integral Gain( ) B-7 Integrator Saturated High Enable ( ) B-8 Integrator Saturated Lo Enable ( ) B-8 Integrator Limit( ) B-7 Integral Dead Zone( ) B-7 Last AutoCal Status( ) B-9 Leak Class (Trim)( ()) B-5 Length Units( ) B-5 Lever Arm Length( ) B-5 Lever Style( ) B-5 Limit Switch Trip Point( ) B-7 Limit Switch Valve Close( ) B-5 Limit Switch Valve Open( ) B-5 83
/ Lo Limit/Cutoff Point(Lo / ) B-6, B-8 Lo Limit/Cutoff Select(Lo / ) B-6, B-8 Manual Calibration( ) B-9 Manufacturer (Device)(()) B-3 Maximum Recorded Temperature( ) B-10 Maximum Supply Pressure( ) B-7 Message( ) B-3, B-5 Mininum Recorded Temperature( ) B-10 Minor Loop Sensor Failure Shutdown ( ) B-8 MLFB Gain(MLFB ) B-7 Model (Device)(()) B-3 Non-Critical NVM Failure Shutdown ( NVM ) B-8 Number of Power Ups( ) B-10 Outlet Pressure( ) B-5 Output Circuit Comm Failure Enable ( ) B-8 Output Terminal Enable( ) B-7 Packing Type( ) B-5 Partial Stroke Test( ) B-10 Partial Stroke Test (PST)( (PST)) B-7 Performance Tuner( ) B-4, B-7, B-10 Polling Address( ) B-5 Port Diameter (Trim)( ()) B-5 Port Type (Trim)( ()) B-5 Position Transmitter( ) B-5 Pressure A( A) B-3, B-10 Pressure A-B( A-B) B-3, B-10 Pressure B( B) B-3, B-10 Pressure Fallback Active Enable ( ) B-8 Pressure Range Hi( Hi) B-6 Pressure Range Lo( Lo) B-6 Pressure Sensor Failure Shutdown ( ) B-8 Pressure Sensors (Calibration)( ()) B-9 Pressure Tuning Set( ) B-7 Pressure Units( ) B-5 Proportional Gain( ) B-7 PST Enable(PST ) B-7 PST Calibration(PST ) B-9 PST Pressure Limit(PST ) B-7 PST Start Point(PST ) B-7 PST Variables(PST ) B-7 Push Down To (Trim)( ()) B-5 PWB Serial Number(PWB ) B-3 Quick Release( ) B-5 Rated Travel( ) B-5 Relay Adjust( ) B-9 Relay Type( ) B-7 Reference Voltage Failure Shutdown ( ) B-8 Reset Valve Stuck Alert( ) B-10 Restart Control Mode( ) B-10 Restart Processor( ) B-10 Seat Type (Trim)( ()) B-5 Setpoint( ) B-3, B-10 Shutdown on Alert( ) B-8 Solenoid Valve( ) B-5 SP Rate Close(SP ) B-6 / SP Rate Open(SP ) B-6 Spring Rate( ) B-5 Spring Rate Units( ) B-5 Stabilize/Optimize( / ) B-4, B-7, B-10 Stem Diameter( ) B-5 Stroke Valve( ) B-10 Supply Pressure( ) B-3, B-10 Supply Pressure Lo Alert( Lo ) B-8 Switch Closed( ) B-7 Temperature() B-10 Temperature Units( ) B-5 Temp Sensor Failure Shutdown( ) B-8 Torque Units( ) B-5 Transmitter Output( ) B-7 Travel( ) B-3, B-10 Travel Accumulator( ) B-10 Travel Accumulator Alert Enable ( ) B-8 Travel Accumulator Alert Point ( ) B-8 Travel Alert Deadband( ) B-8 Tavel Alert Hi Enable( Hi ) B-8 Travel Alert Hi Hi Enable( Hi Hi ) B-8 Travel Alert Hi Hi Point( Hi Hi ) B-8 Travel Alert Hi Point( Hi ) B-8 Travel Alert Lo Enable( Lo ) B-8 Travel Alert Lo Lo Enable( Lo Lo ) B-8 Travel Alert Lo Lo Point( Lo Lo ) B-8 Travel Alert Lo Point( Lo ) B-8 Travel Counts( ) B-10 Travel Deviation (Alert Setup)( ( )) B-8 Travel Deviation Pressure Fallback ( ) B-6 Travel Deviation Pressure Fallback Time ( ) B-6 Travel Limit/Cutoff High Enable ( / ) B-8 Travel Limit/Cutoff Lo Enable ( / Lo ) B-8 Travel/Pressure Select (Alert Setup) ( / ( )) B-8 Travel Sensor Failure Shutdown ( ) B-8 Travel Sensor Motion( ) B-7 Travel Tuning Set( ) B-7 Travel Units( ) B-5 Travel/Pressure Select( / ) B-6, B-10 Unbalanced Area (Trim)( ()) B-5 Valve Class( ) B-5 Valve Manufacturer( ) B-5 Valve Model( ) B-5 Valve Serial Number( ) B-3, B-5 Valve Size( ) B-5 Valve Style( ) B-7 Velocity Gain( ) B-7 View Alert Records( ) B-10 View Edit Lag Time( ) B-6 View Edit Lead/Lag( /) B-6 Volume Booster( ) B-5 Write Protection( ) B-1, B-3, B-5 Zero Power Condition( ) B-7 84
B-1. B-2. HART Application 1 2 3 4 1 Offline 2 Online 3 Utility 4 HART Diagnostics Online 1 Overview 2 Configure 3 Service Tools B-3. (1) Overview 1 Device Status 2 Analog Input 3 Setpoint 4 Travel 5 Supply Pressure 1 6 Pressure A 7 Pressure B 8 Pressure A-B 9 Device Information 1-8 (HC) 1-9 (AD, PD, ODV) Device Information 1 Identification 2 Revisions 3 Security 1-8-3 (HC) 1-9-3 (AD, PD, ODV) Security 1 Write Protection 2 Change Write Protection 1-8-1 (HC) 1-9-1 (AD, PD, ODV) Identification 1 HART Tag 2 HART Long Tag 2 3 Manufacturer 4 Model 5 Instrument Level 6 Device ID and Serial Numbers 7 Message 8 Description 1-8-2 (HC) 1-9-2 (AD, PD, ODV) Revisions 1 HART Universal Revision 2 Device Revision 3 Hardware Revision 4 Firmware Revision 5 DD Information 1-8-1-5 (HC, HART 5) 1-8-1-6 (HC, HART 7) 1-9-1-5 (AD, PD, ODV, HART 5) 1-9-1-6 (AD, PD, ODV, HART 7) Device ID and Serial Numbers 1 Device ID 2 Valve Serial Number 3 Instrument Serial Number 4 PWB Serial Number : 1 AD, PD ODV. 2 HART HART 7. B-4. (2-1) Guided Setup 1 Device Setup 2 Performance Tuner 1 : 1 HC /. 85
B-5. > (2-2-1) > (2-2-2) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke Test (PST) 7 Outputs 2-2-2-6-5 Accessories 1 Volume Booster 2 Quick Release 3 Solenoid Valve 4 Position Transmitter 5 Limit Switch Valve Open 6 Limit Switch Valve Close 2-2-1 Mode and Protection 1 Instrument Mode 2 Change Instrument Mode 3 Write Protection 4 Change Write Protection 2-2-2-6 Spec Sheet 1 Units 2 Valve 3 Trim 4 Actuator 5 Accessories 2-2-2 Instrument 1 Identification 2 Serial Numbers 3 Units 4 Terminal Box 5 Analog Input Range 6 Spec Sheet 7 Edit Instrument Time : 1 HART HART 7. 2 ODV. 2-2-2-6-3 Trim 1 Seat Type 2 Leak Class 3 Port Diameter 4 Port Type 5 Flow Direction 6 Push Down To 7 Flow Tends To 8 Unbalanced Area 2-2-2-6-4 Actuator 1 Actuator Manufacturer 2 Actuator Model 3 Actuator Size 4 Actuator Selection 5 Lever Style 6 Lever Arm Length 7 Effective Area 8 Spring Rate 9 Air 2-2-2-6-2-9 Torque 1 Dynamic Torque 2 Breakout Torque 2-2-2-1 2-2-2-2 2-2-2-3 2-2-2-4 2-2-2-5 2-2-2-6-2 Valve 1 Valve Manufacturer 2 Valve Model 3 Valve Size 4 Valve Class 5 Stem Diameter 6 Packing Type 7 Valve Travel 8 Inlet/Outlet Pressures 9 Torque Identification 1 HART Tag 2 HART Long Tag 3 Description 4 Message 5 Polling Address Serial Numbers 1 Instrument Serial Number 2 Valve Serial Number Units 1 Pressure Units 2 Temperature Units 3 Analog Input Units Terminal Box 1 Calibration Button 2 Auxiliary Terminal Action 2 3 Edit Auxiliary Terminal Action Analog Input Range 1 Input Range Hi 2 Input Range Lo 2-2-2-6-1 Units 1 Travel Units 2 Length Units 3 Area Units 4 Spring Rate Units 5 Torque Units 2-2-2-6-2-7 Valve Travel 1 Rated Travel 2 Actual Travel 2-2-2-6-2-8 Inlet/Outlet Pressures 1 Inlet Pressure 2 Outlet Pressure 1 2 86
B-6. > / (2-2-3) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke Test (PST) 7 Outputs 2-2-3 Travel/Pressure Control ODV 1 Travel/Pressure Select 2 Cutoffs and Limits 3 End Point Pressure Control (EPPC) 4 Pressure Control 5 Pressure Fallback 6 Control Mode 7 Response Control 8 Dynamic Response 2-2-3-8 Dynamic Response 1 SP Rate Open 2 SP Rate Close 3 View/Edit Lead/Lag 2-2-3-7 Characterization 1 Input Characterization 2 Custom Characterization ODV HC, AD, PD 2-2-3 Travel/Pressure Control HC, AD, PD 1 Travel/Pressure Select 2 Cutoffs and Limits 1 3 Pressure Control 4 Pressure Fallback 5 Control Mode 6 Characterization 7 Dynamic Response 2-2-3-6 (HC) 2-2-3-7 (AD, PD) Dynamic Response 1 SP Rate Open 2 SP Rate Close 3 View/Edit Lag Time 2-2-3-5 (HC) 2-2-3-6 (AD, PD) Characterization 1 Input Characterization 2 Custom Characterization 2-2-3-2 Cutoffs and Limits 1 Hi Limit/Cutoff Select 2 Hi Limit/Cutoff Point 3 Lo Limit/Cutoff Select 4 Lo Limit/Cutoff Point 2-2-3-3 End Point Pressure Control (EPPC) 1 EPPC Enab 2 Change EPPC Enab 3 EPPC Set Point 4 EPPC Saturation Time 2-2-3-4 Pressure Control 1 Pressure Range High 2 Pressure Range Lo 2-2-3-2 Cutoffs and Limits 1 Hi Limit/Cutoff Select 2 Hi Limit/Cutoff Point 3 Lo Limit/Cutoff Select 4 Lo Limit/Cutoff Point 2-2-3-3 Pressure Control 1 Pressure Range High 2 Pressure Range Lo 2-2-3-4 (AD, PD) Pressure Fallback 1 Tvl Dev Press Fallback 2 Tvl Dev Press Fallback Time 3 Fallback Recovery 2-2-3-4 (HC) 2-2-3-5 (AD, PD) Control Mode 1 Control Mode 2 Change Control Mode 3 Restart Control Mode 2-2-3-6 2-2-3-5 Control Mode Pressure Fallback 1 Control Mode 2 Change Control Mode 1 Tvl Dev Press Fallback 3 Restart Control Mode 2 Tvl Dev Press Fallback Time 3 Fallback Recovery : 1 AD, PD ODV. 87
B-7. > (2-2-4) > (2-2-7) Manual Setup 1 Mode and Protection 2 Instrument 3 Travel/Pressure Control 4 Tuning 5 Valve and Actuator 6 Partial Stroke Test (PST) 1 7 Outputs WITH I/O PACKAGE 2-2-6 (HD, AD, PD) 2-2-7 (ODV) Outputs 1 Output Terminal Config 2 Switch Configuration 3 Transmitter Output 2 4 HART Var Assignments 5 Burst Mode 4 2-2-6-5 (HC, AD, PD) 4 2-2-7-5 (ODV) Burst Mode 1 Burst Enable 2 Burst Command 2-2-6-4 (HC, AD, PD) 2-2-7-4 (ODV) HART Var Assignments 1 Primary Variable (PV) 2 Secondary Variable (SV) 3 Tertiary Variable (TV) 4 Quaternary Variable (QV) 3 WITH I/O PACKAGE 2-2-4 WITHOUT I/O PACKAGE Tuning 1 Travel Tuning 2 Pressure Tuning 3 Travel/Pressure Integral Settings 2-2-4-3 Travel/Pressure Integral Settings 1 Integral Dead Zone 2 Integrator Limit 2-2-6-1 (HC, AD, PD) 2-2-7-1 (ODV) Output Terminal Config 1 Output Terminal Enable 2 Function 3 Fail Signal 2-2-6-2 (HC, AD, PD) 2-2-7-2 (ODV) Switch Configuration 1 Limit Switch Trip Point 2 Alert Switch Source 3 Switch Closed 2-2-5 Valve and Actuator 1 Valve Style 2 Actuator Style 3 Feedback Connection 4 Relay Type 5 Zero Power Condition 6 Travel Sensor Motion 7 Maximum Supply Pressure 2-2-6 Partial Stroke Test (PST) 1 1 PST Pressure Limit 2 PST Enable 3 PST Start Point 4 PST Variables WITHOUT I/O PACKAGE 2-2-6 (HD, AD, PD) 2-2-7 (ODV) Outputs 1 HART Var Assignments 2 Burst 4 2-2-6-2 (HC, AD, PD) 4 2-2-7-2 (ODV) Burst Mode 1 Burst Enable 2 Burst Command 2-2-4-1 Travel Tuning 1 Travel Tuning Set 2 Proportional Gain 3 Velocity Gain 4 MLFB Gain 5 Integral Enable 6 Integral Gain 7 Performance Tuner 5 8 Stabilize/Optimize 2-2-4-2 Pressure Tuning 1 Pressure Tuning Set 2 Proportional Gain 3 MLFB Gain 4 Integral Enable 5 Integral Gain 2-2-6-1 (HC, AD, PD) 2-2-7-1 (ODV) HART Var Assignments 1 Primary Variable (PV) 2 Secondary Variable (SV) 3 Tertiary Variable (TV) 4 Quaternary Variable (QV) : 1 (PST) ODV. 2 HART 5 HART VAR. 3 HART 5. 4 HART 5. 5 AD, PD ODV. 88
B-8. (2-3) Alert Setup 1 Electronics 2 Supply Pressure Alert 3 Travel 4 Pressure Fallback 5 Travel History 6 EPPC Deviation 3 7 Output Circuit Comm Failure Enable 8 Shutdown On Alert 5 9 Alert Record/Instrument Time 5 2-3-5 (HC) 2-3-7 (AD, PD) 2-3-9 (ODV) 5 Alert Record/Instrument Time 1 Alert Record Not Empty Enable 2 Alert Record Full Enable 3 View Alert Records 4 Clear Records 5 Instrument Alert Record 6 Instrument Time is Approximate Enable 7 Edit Instrument Time Shutdown On Alert 1 Sensors 2 Electronics 2-3-4-1 (HC) 2-3-6-1 (AD, PD) 5 2-3-8-1 (ODV) Electronics 1 Drive Current Failure Shutdown 2 Critical NVM Failure Shutdown 3 Non-Critical NVM Failure Shutdown 4 Flash Integrity Failure Shutdown 5 Reference Voltage Failure Shutdown 2 1 2-3-4 (HC) 2-3-6 (AD, PD) 2-3-8 (ODV) 5 4 2-3-1 Electronics 1 Drive Signal Alert Enable 2-3-2-2 (HC) 2-3-2 (AD, PD, ODV) 2-3-3-2 (AD, PD, ODV) Supply Pressure Lo Alert 1 Travel Deviation 1 Supply Pressure Lo Alert Enable 1 Travel Deviation 2 Supply Pressure Lo Alert Point 2 Travel Deviation Alert Enable 3 Travel Deviation Alert Point 4 Travel Deviation Time 2-3-2 (HC) 2-3-3 (AD, PD, ODV) 2-3-2-3 (HC) Travel 2-3-3-3 (AD, PD, ODV) 1 Travel Alert DB Travel Limit 2 Travel Deviation 1 Travel Alert Hi Hi Enable 3 Travel Limit 2 Travel Alert Hi Hi Point 4 Travel Limit/Cutoff 3 Travel Alert Lo Lo Enable 5 Integrator 4 Travel Alert Lo Lo Point 5 Travel Alert Hi Enable 2-3-2-5 (HC) 6 Travel Alert Hi Point 2-3-3-5 (AD, PD, ODV) 7 Travel Alert Lo Enable Integrator 8 Travel Alert Lo Point 1 Integrator Sat Hi Enable 2 Integrator Sat Lo Enable 2-3-2-4 (HC) 2-3-3-4 (AD, PD, ODV) 2-3-4 (AD, PD, ODV) Travel Limit/Cutoff Pressure Fallback 2 1 Travel Limit/Cutoff Hi Enable 2 Hi Limit/Cutoff Point 1 Pressure Fallback Active Enable 3 Hi Limit/Cutoff Select 2 Travel/Pressure Select 4 Travel Limit/Cutoff Lo Enable 3 Fallback Recovery 5 Lo Limit/Cutoff Point 6 Lo Limit/Cutoff Select 2-3-3 (HC) 2-3-5 (AD, PD, ODV) Travel History 2-3-6 (ODV) 1 Cycle Count/Travel Accum Deadband EPPC Deviation 3 2 Cycle Count Alert Enable 3 Edit Cycle Counts 1 EPPC Deviation Alert Enable 4 Cycle Count Alert Point 2 EPPC Set Point 5 Travel Accumulator Alert Enable 3 EPPC Deviation Alert Point 6 Edit Travel Accumulator 4 EPPC Deviation Time 7 Travel Accumulator Alert Point 2-3-4-2 (HC) 2-3-6-2 (AD, PD) 2-3-8-2 (ODV) Sensors 5 1 Travel Sensor Failure Shutdown 2 Temp Sensor Failure Shutdown 3 Minor Loop Sensor Failure Shutdown 4 Pressure Sensor Failure Shutdown : 1 Lo AD, PD ODV. 2 AD, PD ODV. 3 EPPC ODV. 4. 5. 89
B-9. (2-4) HART 5 Calibration 1 Travel Calibration HART 7 2 Relay Adjust 3 Sensor Calibration 4 PST Calibration 1 2-4-3 Sensor Calibration 1 Pressures Sensors 2 Analog Input 2 HART 5 2-4-1 Travel Calibration 1 Auto Calibration 2 Last AutoCal Status 3 Manual Calibration 4 Calibration Record HART 7 2-4-1 Travel Calibration 1 Auto Calibration 2 Last AutoCal Status 3 Manual Calibration 4 Calibration Type 5 Calibration Time 6 Calibrator : 1 PST ODV. 2 DIP MULTI-DROP. B-10. (3) Service Tools 1 Device Status 2 Alert Record 3 Diagnostics 4 Variables 5 Maintenance 3-5 Maintenance 1 Performance Tuner 3 2 Stabilize/Optimize 3 Restart Processor 4 Reset Valve Stuck Alert 4 5 Change to HART 5 5 3-2 Alert Record 1 View Alert Records 2 Clear Records 3-3 Diagnostics 1 Stroke Valve 2 Partial Stroke Test 1 3-4 Variables 1 Travel/Pressure 2 Control Mode 3 Analog Input 4 Temperature 5 Travel Counts 6 Characterization 7 Travel History 8 Run Time Extremes 3-4-8 Run Time Extremes 1 Maximum Recorded Temperature 2 Minimum Recorded Temperature 3 Days Powered Up 4 Number of Power Ups 3-4-7 Travel History 1 Cycle Counter 2 Travel Accumulator 3-4-1 3-4-2 3-4-6 Travel/Pressure 1 Setpoint 2 Travel 3 Drive Signal 4 Supply Pressure 2 5 Pressure A 6 Pressure B 7 Pressure A-B 8 Travel/Pressure Select 9 Fallback Recovery 2 Control Mode 1 Control Mode 2 Change Control Mode 3 Restart Control Mode Characterization 1 Input Characterization 2 Custom Characterization : 1 ODV. 2 AD, PD, ODV. 3 AD, PD ODV. 4 ODV. 5 HART 5 HART 7. 90
..... ANSI() ANSI American National Standards Institute. ANSI /.,.. (byte) (), 1 8.. FIELDVUE...... FIELDVUE : 4-20mA. HART.. ValveLink.,... -(I/P). FIELDVUE.. 91
.... 0 ~ 40. ( ).. 0% ~ 100%. 2% ~ 5%. (deviation).,. ID.. I/P... 20.. =. <10% >3% >90% <97% =. <10% <97% >90% >3% (equal percentage). FIELDVUE....... 25%.. (: ma).. Fisher Controls.. 92
HART() HART Highway Addressable Remote Transducer. HART Universal HART Universal.., (equal percentage),....... 5 1.. : In Service:. In Service. Out of Service: Out of Service. Out of Service. HART. : :.. :..... ANSI/FCI 70-2 IEC 534-4.. FIELDVUE. (equal percentage). Linearity, dynamic ().. FIELDVUE : (RAM), (ROM) (NVM).. ENTER,. 93
( ).. 0 ~ 400. 0. ( )... 0 ~ 400. 0. (NVM). ROM NVM. NVM. :.. point-to-point 0. 0 ~ 15. FIELDVUE. DVC6200 3.. 1. 1. ValveLink HART 1. 2. HART ValveLink 2. :., 1 1.. 40%. FIELDVUE.. (RAM). (ROM) (NVM).. (ROM). ROM.,.. 94
( ) 1 ( ). 0. ( ROM) ( RAM).., ( ). FIELDVUE.. (accumulator) FIELDVUE. (accumulator) (accumulator). (accumulator) 0. (accumulator) (accumulator) (accumulator). (accumulator) (accumulator) (accumulator). (accumulator). (accumulator) (accumulator). 0% ~ 40 %. (accumulator) (accumulator).. 0% ~ 100%.... 4. Hi, Lo, Hi Hi Lo Lo. ( ). -25% ~ 125%. Hi ( ). -25% ~ 125%. Hi Hi ( ). -25% ~ 125%. Lo ( ). -25% ~ 125%. Lo Lo ( ). -25% ~ 125%. ( )..... 95
(deviation) ( ). (deviation). (deviation) (deviation). (deviation). (deviation) ( ). (deviation) (deviation) (deviation). 0% ~ 100%. 5%. (deviation) ( ). 1 ~ 60. ( ).... ( ). FIELDVUE. DVC6200.... FIELDVUE.. (watch dog).. ( ). (ZPC). ( C) A. ( A) B. A. ( B) B. 96
A, 7, 28, 51, 51, 35,,, 33, 33 AMS :, 4, 39, 17 Hi, 17 Lo, 18, 17, 38, 38, 53, 52, 12, 17 B, 34, Tri-Loop, 14 C, 37, 42, 41 PST, 45, 40, 43, 41, 38, 38, 39 (CAL), 17, 52,, NEPSI, 7, PESO CCOE, 7, TIIS, 7,,, CUTR, 7, KGS, 7, 21 HART Universal, 36, 21, 21, 21, HART 7 HART 5, 6, 11,, 3, 7, 3, 3, 7, 21, 21, 21, 21 NVM, 48,, 21 Customs Union Technical Regulations( ),,,,, 7, 19 Hi /, 19 Hi /, 19 Lo /, 19 Lo /, 19, 51 D SEP, 8,, 15, 17, 48, 47, 48, 48, 51, 48, 49, 52, 50, 51 97
, 52, 52, 52, 52, 52, 39 DIP,, 61, 48, 48, 23, 23 SP, 23 SP, 23 E, 18, 8, 7, 3, 6 EMC,, 8, 19 (EPPC), 19,, 24, 27 F,, 33, 20 -, /, 18 -/, /, 19,, 83, 28,, 53, 83, 49, /, 23 Flash, 48 FSK(, frequency shift keying), 79,, 33, 33, 33 G, 27, 24,, 63, 15 H HART,, 79 HART, 9 HART, 16 HART, 16 HART Tri Loop, 13, 13 HART, 34 HART, 3, 7 Hi /, 19 Hi /, 19, 7 I I/P, 59, 59, 60 I/P,, 59, 6 INMETRO,, /, 7, 21 (impedance), 7, 17 Hi, 17 98
Lo, 18, 6, 3,, 4, 16,, 18, 49, 17 4 20mA, 7, 7 (integral), /, 27 (integral), 27, 26 (integral), 27, 26,, 8 (integral), 27 (integral), 8 Integrator Limit, /, 28 Integrator Saturated, 50 Integrator Saturated, 50, 49 K KGS,,, 7 L, 23 /, 23, 23 /, 23, 7,,, 33, 33,,, 7 Lo /, 19 Lo /, 19, 49 M, 28,, 56,, 63 I/P, 59, 56, 63, 61, 64, 56, 55, 39, 15, 32, 12, 6, 29, 17, 49 MLFB, 27, 26,, 34, 57, 58, 56, 6 N NAMUR NE43, 7,, 55 NEPSI,,, 7 NVM, 48 99
O /, 48, 7, 49,, 41, 6, 33, 33, 33, 34 HART, 34, 33, 33, 34, 47, 53 1, 47 P (), 53 PST, 32 PST, 30 PST, 32 PST, 32, 32, 32 (ODV ), 52,, 53, 53 (PST), 30 PST,, 32, 69, 71, 69, 32, 26 PESO CCOE,, /, 7,, 63, 3, 63, 63, 63, 17, 33, 20, 20 Lo, 20 /, 18, 52, 50, 20 Lo, 20, 49,, 41, 27, 27,, 27, 17 DVC6200, 79 HART, 79, 61, 61, 61, 27, 25 PST, 45 PST, 32 PST, 30 PST, 32 PST, 32, 40 R, 48, 5, 43, 28 100
, 21, 66 RShaft,, 28 RShaft 1,, 28 RShaft 2,, 28 S, 41, 17, 17, 48, 48, 23 /, 23 SP, 23 SP, 23, 18,, 28, 5 SStem 1,, 28 SStem 110,, 28 SStem 19,, 28 SStem 210,, 28 SStem 25,, 28 SStem 38,, 28 SStem 50,, 28 SStem 7,, 28 /, 26 1,, 47, 6, 52, 6, 49,, 42, 33, 8, 33, 33, 33, 33, 33 T, 68,, 6, 49, 17, 17, 17 (CAL), 17, 64, 64, 65, 32 TIIS,,, 7,, 63, 7, 33,, 33, 7, 34 (accumulator), 51 Hi, 50 Hi Hi, 50 Lo, 50 Lo Lo, 50, 38, /, 18, 50 / Hi, 50 / Lo, 50, 49, 29, 24, 26 /, 26, 24,, 24 /, 18, 21, 19, 19, 20, 20, 20 /, 18 101
, 20, 20 /, 18 -/, 18, 18 -, 18, 18, 65, 65, 66, 24 (integral), 27, 27, 24, 27, 24, 20, 20 U, 17, 17, 17 V, 17, 28 ValveLink, 4, 49, 1, 47,, 25, 7, 9, 65 W DVC6200, 7 DVC6205, 7 DVC6215, 7, 9, 9, 11 HART, 9, 9, 12, 16 Z, 29 102
DVC6200 103
DVC6200,,,.,,. Fisher, FIELDVUE, ValveLink, PlantWeb, PROVOX, Rosemount, Tri-Loop, DeltaV, RS3 THUM (Emerson Electric Co.)., (Emerson Electric Co.). HART FieldComm Group..,,.,.. Emerson Automation Solutions Marshalltown, Iowa 50158 USA Sorocaba, 18087 Brazil Cernay, 68700 France Dubai, United Arab Emirates Singapore 128461 Singapore www.fisher.com 104 2012, 2017 Fisher Controls International LLC..