대원열판프로젝트2011-최종번역

Size: px

Start display at page:

Download "대원열판프로젝트2011-최종번역"

진혁 연
5 years ago
Views:

1 Customer-First new future of our Customerand the futureof the industry and economy.

DHP men do not scare at the new future to create when all other people say it is not, when they say they should just pass by and when they say this is enough.

2 The attractive Company Creating absolute value Since 1978 DHP is the history itself. We have made the history sticking to its way nobody wants. DHP men are proud of the history we have made to meet what is needed by the time period as the time period is created. DHP men do not scare at the new future to create when all other people say it is not, when they say they should just pass by and when they say this is enough. Sticking to the best being proud of ourselves as top, we will create the better picture along with the present and future progress not satisfied from the past history to make the higher dream come true based on the challenge and success history. DHP is the history itself. Since 1978

History of Company new future of our Customer and the future of the industry and economy.

Mechanical Engineers' 2002 Registered Patent Right of 'Disk Type Heat Exchanger' Designated as a prospective company of

in Busan Succeeded in developing the foremost Plate Type Heat Exchanger in Korea 2003 Qualified BS EN ISO 9001:2000 by LR

Prize' by 'Ministry of Commerce and Industry' 1984 Succeeded in developing the foremost Herringbone Type Plate in Korea

international Patent Right of 'Double Seal Gasket System' for 28 countries Qualified ISO 14001 2007 Established New Plant

the new plant 2008 Designated as 'leading Company' by Busan Metropolitan City 2009 Awarded prize by Ministry of SMBA(Small

"Q CLASS" Certified by Korea Hydro & Nuclear Power Co., Ltd.

3 History of Company new future of our Customer and the future of the industry and economy Awarded Prize by Ministry of Commerce, Industry and Energy 2001 Qualified ASME 'U' Stamp by 'American Society of Mechanical Engineers' 2002 Registered Patent Right of 'Disk Type Heat Exchanger' Designated as a prospective company of export Awarded Prize by President of Korea, Kim Dae Jung Awarded Prize by the Chief Director of "Korea Energy Management Corporation 1978 Established DAEWON HEAT PLATE Ind. Co.in Busan Succeeded in developing the foremost Plate Type Heat Exchanger in Korea 2003 Qualified BS EN ISO 9001:2000 by LR 2004 Applied Patent Right of 'Non-welding Disk Type Heat Exchanger' 2005 Designated for INNO BIZ 1982 Awarded 'Exellency Prize' by 'Ministry of Commerce and Industry' 1984 Succeeded in developing the foremost Herringbone Type Plate in Korea 1986 Installed 5,000 ton Hydraulic Press 1988 Succeeded in developing Multi-Use Mold for Heat Plate 2006 Registered international Patent Right of 'Double Seal Gasket System' for 28 countries Qualified ISO Established New Plant of 30,000m 2 in Gimhae and moves HQ to Busan Awarded DSME 'Quality Certificate' Installed new 20,000 ton Hydraulic Press in the new plant 2008 Designated as 'leading Company' by Busan Metropolitan City 2009 Awarded prize by Ministry of SMBA(Small and Medium Business Administration) Qualified "KEPIC-MN" nuclear quality certificate. "Q CLASS" Certified by Korea Hydro & Nuclear Power Co., Ltd. Awarded prize by Ministry of Knowledge Economy Succeeded in developing Plate Coil 1993 Incorporated DHP Engineering Co., Ltd. Succeeded in developing Hydro Ratchet Spanner 1994 Succeeded in developing Plate Type Gas Cooler 1996 Succeeded in developing Spiral Type Heat Exchanger 1998 Obtained ISO9001 Designated as 'Venture Company' 1999 Installed 30,000 ton Hydraulic Press for ultra size plate pressing Succeeded in developing Disk Type Heat Exchanger

Main FactoryPanoramic view of the Company Outline of

Established : 1978 Representative : Song, Young Ho

Warehouse : 1,400m 2, Office Building : 800m 2

Heat Exchanger Spiral Type Heat Exchanger Plate Coil

Reception Hall / 2nd Fl, Office Area PHE Assembly /

Dining Hall Forming / Blanking Frame Assembly /

Korean Won 200,000 Vision 2020 Challenging for the

4 Main FactoryPanoramic view of the Company Outline of Company Name of Company : DHP Engineering Co., Ltd. Established : 1978 Representative : Song, Young Ho Yard Area : Land : 30,000m 2, Factory : 3,200m 2 Warehouse : 1,400m 2, Office Building : 800m 2 Products : Plate Heat Exchanger Disk & Shell Type Heat Exchanger Spiral Type Heat Exchanger Plate Coil Fresh Water Generator 1st Fl. Reception Hall / 2nd Fl, Office Area PHE Assembly / Test 1st Fl. Staff Lounge / 2nd Fl. Dining Hall Forming / Blanking Frame Assembly / Painting Warehouse Financial Development Mil. Korean Won 200,000 Vision 2020 Challenging for the world! Challenging for the future! 100,000 Sales Net Profit 38,347 38,852 30,000 10,000 2,135 2, DHP 6~7Page

The attractive Company Creating absolute value Message from the CEO The advanced Technology of DHP Engineering unfolds a new future of our Customer and the future of the industry and economy.

Korea is excellent ship building country through out the history and now it is world famous and moreover it will still be the best because DHP is standing in the heart of ship building.

We do the same service for power plant, chemical plant, fresh water generator plant and industrial area. We do not consume heat at all in the plant instead we change the heat direction for users wish.

5 The attractive Company Creating absolute value Message from the CEO The advanced Technology of DHP Engineering unfolds a new future of our Customer and the future of the industry and economy. Innovation for tomorrow DHP is the first and the best Plate Heat Exchanger company in Korea since its establishment in But now, it rises as world best plate heat exchanger company in the world. Korea is excellent ship building country through out the history and now it is world famous and moreover it will still be the best because DHP is standing in the heart of ship building. We can cool down lubrication oil temperature and fresh water temperature with sea water or fresh water. And we return the heat for ship again to get fresh water and heating. We do the same service for power plant, chemical plant, fresh water generator plant and industrial area. We do not consume heat at all in the plant instead we change the heat direction for users wish. Heat exchanging without any energy consumption is our mission. If there is heat exchange problem that is charged with DHP. We can service the best solution. Thank you President Dr. Young Ho Song(Ph.D.) Innovation for TOMORROW - We will make it for customer impressed not customer satisfaction. DHP 8~9Page

Accounts Plant General affair Seoul Office Sales Assist Purchasing

Engineering unfolds a new future of our Customer and the future of the

6 Organization President Q. A Sales Production Administration R & D Design Head Office Marine Accounts Plant General affair Seoul Office Sales Assist Purchasing Domestic China Office Overseas The advanced Technology of DHP Engineering unfolds a new future of our Customer and the future of the industry and economy. Technology First and Specialized in Heat Exchanger manufacturing company Quality First Safety First DHP 10~11Page

Our goal is to have our company firmly established

setting up an integrated system from warehousing

Manufacturing Process We create the highest

management system and accumulatedproduction

DHP has set up high quality production system

passions to lead the industry with the cutting

21st century and it will not only satisfy our

7 Our goal is to have our company firmly established as the best Plate Heat Exchanger business by setting up an integrated system from warehousing of raw materials to the delivery of products. Manufacturing Process We create the highest quality using our specialized production management system and accumulatedproduction know-how. DHP has set up high quality production system based on the challenge and creative mind with passions to lead the industry with the cutting edge technology to create new technology for the 21st century and it will not only satisfy our customers but also realize the customer impression by our most advanced production line and ultra-precision technology accumulated. DHP 12~13Page

We will make all produsts for customer impression not customer satisfaction.

composed of a fixed frame, a movable frame and corrugated plates which are in between the two frames.

To prevent leaking, gaskets are mounted around the plates and tightening bolts are used to put the plates together.

The arrangement of two liquids is that the cold liquid goes upward and hot liquid goes downward in order to increase heat transfer

There is an advantage to use plate type heat exchangers over Shell & Tube type heat exchangers, that is to say, the corrugations in the

is always 3~5 times higher than Shell & Tube type heat exchangers.

transfer surface required. Gaskets on the plates ensure that the fluid channels are securely sealed from each other.

8 We will make all produsts for customer impression not customer satisfaction. PLATE HEAT EXCHANGER Heat Exchangers (Plant) Principle Plate heat exchangers have more than 100 years history and its structure is composed of a fixed frame, a movable frame and corrugated plates which are in between the two frames. Hot liquid and cold liquid go through between the corrugated plates in turn. To prevent leaking, gaskets are mounted around the plates and tightening bolts are used to put the plates together. There is heat transfer between the two liquids through the plates. This is the main principle of a plate heat exchanger. The arrangement of two liquids is that the cold liquid goes upward and hot liquid goes downward in order to increase heat transfer efficiency. There is an advantage to use plate type heat exchangers over Shell & Tube type heat exchangers, that is to say, the corrugations in the plates increase the liquid turbulence to a low Reynolds number and the liquids flow is counter flow so that the heat transfer efficiency is always 3~5 times higher than Shell & Tube type heat exchangers. Design The main components of the Plate Heat Exchangers ; The plate pack comprises of a number of heat plates, according to the heat transfer surface required. Gaskets on the plates ensure that the fluid channels are securely sealed from each other. The direction of flow within the exchanger is determined by the gasket. The frame enclosing the plate pack is held together with tightening bolts. Connections for incoming and outgoing fluids are usually in the fixed frame of the heat exchanger In the case of multi pass flow, connections have to be in the fixed frame and the movable frames. Technology First Moving frame Fixed frame Carring bar Support Guide bar Tightening bolt A PLATE B PLATE Fluid channel Fluid division side Heat plate Gasket Air hole Heat Exchangers (Marine) Heat Exchangers (Plant) DHP 14~15Page

Force (Up to 50 bar) Good keeping of Tightened Plate Pack Guarantee Longer Life Time of Gaskets Conventional Design New Design 1 New Design 2 Plate Heat Exchanger Single Pass / As single pass has the

Single Pass & Multi Pass / If the temperature is much different between inlet and outlet and the allowable pressure loss between hot side and cold side is much different, the performance can be

9 We will make all produsts for customer impression not customer satisfaction. PLATE HEAT EXCHANGER Innovative Plate Technology Newly Developed Perfect seal Gasket International Patent Right Registered (28 Countries) 3Dimentional Pressure Dispersion System 300% Higher Friction Force (Up to 50 bar) Good keeping of Tightened Plate Pack Guarantee Longer Life Time of Gaskets Conventional Design New Design 1 New Design 2 Plate Heat Exchanger Single Pass / As single pass has the counter flow and the nozzle is mounted on the fixed frame, only frame can be moved for maintenance so it is easy for the maintenance and increase or decrease in capacity. Single Pass & Multi Pass / If the temperature is much different between inlet and outlet and the allowable pressure loss between hot side and cold side is much different, the performance can be enhanced by increasing overall heat transfer coefficient, making one side to be 1pass and the other side to be multi pass. Multi Pass / If the flow rate is quite less than heat transfer rate and the pollution level is not much, the advantage is that the heat transfer effect can be increased significantly by designing both hot side and cold side to be multi pass but the disadvantage is that the piping of nozzle part in the movable frame should be corrected when it is necessary to expand the heat exchanger capacity Single & Multi-Multi Pass / This is an efficient heat exchanger that can make possible the heat exchange for more than 3 types of the fluid by one unit of the heat exchanger using a separator frame. It is mainly used for sterilizer in food industry. One(1) Pass HOT INLET COLD OUTLET HOT OUTLET COLD INLET Multi Pass Arrangement of Hest Plate HOT OUTLET COLD INLET HOT INLET Two(2) Pass-One(1) Pass COLD OUTLET Special Feature Cost Savings / DHP Plate Heat Exchangers save costs, with their high efficiency, low investment, compact installation and simple maintenance. High Heat Transfer Coefficients / DHP Plate Heat Exchangers provide high rates of heat transfer, due to the turbulence inducing shape of the plates. The special gasket configuration of the plates prevents any mixing of the media being processed. In the port area both fluids are separated by double gaskets. Additional safety is ensured by the leakage gap. Adhesive-Free Gasket / DHP developed adhesive-free gaskets. The optimum gasket setting in the gasket groove and the fixing of the gaskets by pressed indentations, allow high resistance against pressure and enable a quick and simplegasket replacement. Flexibility / DHP Plate Heat Exchangers can be adapted to changing process conditions. If process conditions change plates can be added or removed easily. This eliminates the need for costly re-investment. Low Product Content / This small volume of liquid in the Plate Heat Exchangers is the reason for the low weight of the equipment. It enables a faster start up and shut down of the complete plant, than conventional heat exchangers. Compact Design / DHP Plate Heat Exchangers are of compact design. For example, 200m 2 of heat exchange surface require a Plate Heat Exchanger of only approx. 3m length, 2m height and 1m width. For a shell and tube heat exchanger to achieve the same duty, about 600m 2 of heat exchange surface would be required. Reliable Gasket Structure / DHP s new development of 'Double Seal' gasket system overcomes the limitation of ordinary plate heat exchanger. (3 times high-pressure endurance). Technology First HERRINGBONE DHP 16~17Page

5m(H) ] Heat transmission enabled at little temperature difference by means of complete counter flow. Mixing proof between fluids owing to the perfect welding between both side fluid channels.

Easy for chemical cleaning or mechanical cleaning by opening the cover Guaranteed efficiency for maximized heat transmission by highly developed turbulent flow Nearly no maintenance cost required

sulfuric acid in liquid or vapor phase, oleum, nitric acid, acrylic acid, fatty acid, solution, etc.

Sugar and food industry : Preheater and surface condenser for raw juice, press water,vegetable oil, waste water, etc.

Spec. applied Overall heat transfer coefficient / 1000 ~ 4000kcal/m 2 hr C Heat transfer area : 2 ~ 600 m 2 /set Working pressure : MAX. 30kg/cm 2 G Working temperature : MAX.

Type(BSFX) Both sides spiral fluid heat exchanger It enables both side fluids to form perfect counter flow, so the heat transmission is possible at minor difference of temperature and even when the

10 We will make all produsts for customer impression not customer satisfaction. SPIRAL TYPE HEAT EXCHANGER Features and advantage of the spiral type heat exchanger Compact size and high efficiency guaranteed [ Heating area 580m2: 2m(D)X2.5m(H) ] Heat transmission enabled at little temperature difference by means of complete counter flow. Mixing proof between fluids owing to the perfect welding between both side fluid channels. Fully developed spiral flows in both channels make self cleaning effect and this leads very little fouling inside of channels. Easy for chemical cleaning or mechanical cleaning by opening the cover Guaranteed efficiency for maximized heat transmission by highly developed turbulent flow Nearly no maintenance cost required thanks to the minimized fouling and non-use of gasket Heat exchange of fluid containing slurry Application Chemical industry : Preheating, cooling and condensing of various of fluids such as dense sulfuric acid in liquid or vapor phase, oleum, nitric acid, acrylic acid, fatty acid, solution, etc. Paper industry : Gas, lye cooler, waste gas, terpentine condenser, heat exchanger of heat recovery plant and surface condenser of evaporation plant, etc. Sugar and food industry : Preheater and surface condenser for raw juice, press water,vegetable oil, waste water, etc. Textile industry : Heat exchanger for heat recovery at dyeing and washing process Gas and coal industry : Condenser for ammonia solution, alkacide lyes, benzene washing fluid, ammonium sulfide, etc. Spec. applied Overall heat transfer coefficient / 1000 ~ 4000kcal/m 2 hr C Heat transfer area : 2 ~ 600 m 2 /set Working pressure : MAX. 30kg/cm 2 G Working temperature : MAX. 300 C Material : SUS 304, 316L, Nickel Alloy, Titanium, etc. Type(BSFX) Both sides spiral fluid heat exchanger It enables both side fluids to form perfect counter flow, so the heat transmission is possible at minor difference of temperature and even when the contaminated substance in the fluid stays at wall surface or bottom due to the decrease in flux or stand by during the operation and once the flux is recovered it works as self-cleaning for the contamination due to the speed increase by the sectional decrease in flux passage of the part attached with the contaminated substance. Application / Liquid : Liquid, condenser or gas cooler, etc. Type (CSFX) Cross spiral fluid heat exchanger It has a structure that the heat transmission between fluids occurs vertically and it is used for processing such mixtures or steam, gas or evaporation in large capacity. The fluid passing vertically will go through heat exchanger at high speed with almost no pressure loss as a media for mainly steam or gas but sometimes it can be used for heat exchange of Liquid:Liquid which has much difference in the flux. Application / Vaporiser, condenser, reboiler, gas cooler, heater DHP 18~19Page

exchanger and plate heat exchanger. This heat exchanger is welded plate pack in high pressure vessel. The maximum pressure is up to 100bar and the temperature is up to 400 C.

11 We will make all produsts for customer impression not customer satisfaction. DISK & SHELL TYPE HEAT EXCHANGER Overview Design information DHP's new development 'Disk & Shell Heat Exchanger' is a heat exchanger which is composed of the good points of shell & tube heat exchanger and plate heat exchanger. This heat exchanger is welded plate pack in high pressure vessel. The maximum pressure is up to 100bar and the temperature is up to 400 C.. The main application is condenser, evaporator and the units require high pressure and high temperature but small size. Plate Type DPS20 Shell diameter 200 Plate thickness (up to 40bar) mm 0.7 Surface per plate m Maximum number of plates 200 D1 mm 140 D2 mm 219 D3 L1(max) mm 580 L2 N1 N2 N3 N4 (A) (A) DPS35 DPS60 DPS Variable Variable Performance comparison of Heat Exchangers TECHNICAL SPECIFICATION Capacity : Max. 100MW/Unit Design Temp : -196 C ~ 400 C Design Pressure : Max. 100bar Material : Shell / SS 400, SUS 304, SUS 316, Titanium, Nickel, etc. Plate / SUS 316, 254 SMO, Titanium, Nickel, etc. Application HOT GAS VAPOR STEAM STEAM TOWER HOT GAS VAPOR LIQUID LIQUID LIQUID : LIQUID GAS(AIR) COOLING TOP CONDENSER KETTLE TYPE EVAPORATOR Item Weight Unit Kg Type Shell & Tube Type 1000 (Standard) Spiral Type 800 Plate Type 500 Brazed Type 300 Disk & Shell Type 200 VAPOR H.W COMBUSTI ON GAS WATER Volume Application M LIQ : LIQ GAS : LIQ GAS : GAS 0.7 LIQ : LIQ GAS : LIQ GAS : GAS 0.4 LIQ : LIQ STEAM : LIQ 0.2 LIQ : LIQ GAS : LIQ (Small amount) 0.2 LIQ : LIQ GAS : LIQ GAS : GAS COMPRESSER AIR COOLING VAPOR CONDENSER CONDENSATE VAPOR PIPE LINE MIN 300mm LINE HEATER & COOLER(Small size) H.W BOILER or ECONOMIZER (For incinerator) WATER COMBUSTI ON GAS Max. Oper. Press. Bar F.V ~ 1000 F.V ~ F.V ~ 100 DUCT Max. Oper. Temp. Shape K value Efficiency of Plate Maintenance cost C - Kcal / m 2 hr C % 100 (Standard) - Tube Plate ~ 180 Corrogation Plate Max ~ 230 Corrogation Plate Max Undisassemble -196 ~ 400 Corrogation Plate Max HOT WATER TANK CONDENSATE STEAM ADD SUPPLY WATER HTST SYSTEM(Food) OIL HEATER WASTE GAS HEAT RECOVERY SYSTEM EVAPORATOR & FILLING HOT WATER STORAGE TANK STEAM CONDENSATE EVAPORATOR CONDENSER OUT IN VACUUM PUMP DHP 20~21Page

islands. The DHP vacuum evaporating distiller utilizes heat from diesel engine coolant and LP steam by special steam jet heater.

The vacuum chamber is kept by the seawater driven from condenser combination ejector.

12 We will make all produsts for customer impression not customer satisfaction. FRESH WATER GENERATOR VACUUM EVAPORATING DISTILLER Overview To achieve fresh water for drinking and washing, vacuum distillation system is normally used in the isolated place such as on ships or on islands. The DHP vacuum evaporating distiller utilizes heat from diesel engine coolant and LP steam by special steam jet heater. The DHP vacuum evaporating distiller is based on the DHP's titanium plate heat exchanger, one for evaporating of the heated brine and the other for condensing of the water vapor. The vacuum chamber is kept by the seawater driven from condenser combination ejector. Heated seawater is used as feed water (brine) for the evaporating and evaporating temperature is controlled by vacuum pressure. Evaporating pure water vapor passes through deflector, demister and moving water droplets and then enters the condenser. The pure water vapor condensed by cold seawater. The distillated pure water pumped out by fresh water pump and checked salinity. If the salinity exceeds the specified level, solenoid valve opens in the discharge line of the fresh water pump, this is automatic operation. The salinity exceeds distilling water is returned to evaporating chamber. Special Feature Reliable Water Superior purifying system with lower than 5ppm dissolved solids Titanium Plate Heat Exchangers Sea water resistance material Low weight & Long life Simple & Compact Design Low operation & maintenance costs Simple installation High Performance of Fresh Water Control System Low content of dissolved solids & salts is possible for supplying pure water Automatic operation Equipment Constructions Basic Equipment Titanium Plate Evaporator & Condenser Fresh water pump Vacuum Vessel assembly Fresh water quality control system Liquid jet combination ejector Additional Equipment for operation Cooling water supply pump Jacket water circulation pump Brine anti-scale chemical dosing unit Jacket water temperature above 75 C ) Extended control panel Schematic Diagram of Fresh Water generator (Plate type) Seawater Suction Line for transferring of seawater pumped from sea. Seawater Cooling Line for cooling of water vapor evaporated in a evaporator. Motive Seawater Line for operating a combination ejector. Brine Feed Line for evaporating seawater Technology (The temperature First of seawater is slightly increased because the seawater absorbed the heat in a condenser.) Demister. for removing the seawater droplet entrained by evaporated water vapor. Motive Seawater Line Same of a line number (3). Seawater flow out with high velocity through a ejector nozzle. Fresh Water Line Condensed fresh water to fresh water tank. Main Jacket Water Line Main jacket water outlet from a main engine (about 80). Vacuum Line Not condensed water vapor and non-condensable gas (air) to ejector. Brine Discharge Line Not evaporated seawater to ejector. Ejector Discharge Line Seawater discharge a to overboard. U.V. Sterilizer : Role to sterilize any bacteria in fresh water because a evaporating temperature is about 45. Rehardening Filter : Since Produced fresh water is nearly pure, it is not suitable for drinking and the addition of mineral compositions are needed. DHP 22~23Page

Cooler Performance Test Facility An evaluation means of heat transfer

Monitoring inter/outer leakage due to surge pressure and the

Simulated and controlled conditions for PHE, which is Installed for

Quality Assurance The quality control team of DHP is setting up the

The company has the complete in-house quality assurance system

system along with the independent quality control system for high

We are always doing our utmost to produce and supply the best quality

warehousing of the raw materials to the delivery of products and as a

and ISO 140001 as well as different quality assurance certificates

We will make our full efforts to realize the best customer

13 Cooler Performance Test Facility An evaluation means of heat transfer capacity under actual operating condition. Monitoring inter/outer leakage due to surge pressure and the prevention of maloperation. Simulated and controlled conditions for PHE, which is Installed for applications. Quality Assurance The quality control team of DHP is setting up the best quality control system. The company has the complete in-house quality assurance system through the strict quality inspection using the latest inspection system along with the independent quality control system for high quality products. We are always doing our utmost to produce and supply the best quality product to satisfy our customers through the meeting by process from warehousing of the raw materials to the delivery of products and as a result we could get such quality system certifications as ISO 9001 and ISO as well as different quality assurance certificates being acknowledged by the world leading companies. We will make our full efforts to realize the best customer satisfaction while improving the quality with efficient management system continuously to make sure that the company will be reliable from all customers. ASME Approvals Certificates from classification societies ABS BV CCS DNV GL KR LR NK RINA Our Company policy is to satisfy customers needs with timely delivery and best qualiy. DHP 24~25Page

DHP R&D Center is doing its utmost to prduce perfect product with high quality as a core of the production.

14 We will make all produsts for customer impression not customer satisfaction. COOLING SYSTEM for Marine Application Cooling Operation Sea Water High Temp, Fresh water Fresh water Camshaft Lube Oil Coolar Main Engine Lube Oil Cooler Fresh Water Generator Research & Development DHP R&D Center is doing its utmost to prduce perfect product with high quality as a core of the production. The R&D Center is mainly with technology and production know-how for the development under the business philosophy that R&D should be prior to the sales, contributing to the perfect quality warranty while playing a fundamental role of every anging from CAD / CAM system to design, processing, assembly and inspection. Challenge for World Wide! DHP new vision consist of development of new technique and research. The Best Quality and Service They are promise with DHP. Lube Oil Sterm Tube Lube Oil Cooler Jacket Water Cooler Center Freshwater Coolers DHP 26~27Page

Global Network Global Marketing DHP Around the World The DHP's passion to lead the future industry is endless. DHP is making a difference for the technology network for the future and for the world.

15 Global Network Global Marketing DHP Around the World The DHP's passion to lead the future industry is endless. DHP is making a difference for the technology network for the future and for the world. The company with innovation to create new standard, new management and new technology by realizing the customer impression based on the customer satisfaction policy - this is the fact of DHP. Worldwide sales network All DHP's equipment is tested despatch from our works. If any product or parts is proved defective in material or work man ship within one year or requested customer's condition of entering service which ever is the shortest, it will be replaced free of charge. Italy Germany Kuwait Saudi Arabia Qatar China Taiwan Thailand Malaysia Singapore Japan New Zealand Australia Mexico Canada Main Customer List Customer of Marine Hyundai Heavy Industries Co., Ltd. (HHI) Daewoo Shipbuilding & Marine Engineering Co., Ltd. (DSME) Samsung Heavy Industries Co., Ltd. (SHI) STX Shipbuilding Co., Ltd (STX) Hanjin Heavy Industries & Construction Holdings Co., Ltd. SPP Shipbuilding Co., Ltd. China Ship Building Corporation (CSBC) Cosco Shipyard Group Mawei Shipbuilding Ltd. Jiangmen Nanyang Ship Engineering Co., Ltd. Tsuneishi Shipbuilding Co., Ltd. Saiki Heavy Industries Co., Ltd. Jurong Shipyard Pte Ltd. Customer of EPC, Plant Doosan Heavy Industries & Construction Co., Ltd. Hyundai Engineering & Construction. Korea Hydro & Nuclear Power Co., Ltd. (KHNP) POSCO E & C Samsung Engineering Co., Ltd. SK Chemicals Co., Ltd. Kumho Petrochemical Corporation Technimont SPA Petro Karan Shafagh Kish (P.K.S.K) Nargan Engineers & Constructors Nardis Energy Projects. Pars Oil & Gas Company KNPC DHP 28~29Page

02 Reihe bis 750 bar GB-9.03

02 Reihe bis 750 bar GB-9.03 Water as a tool High-Pressure Plunger Pumps 02-Line (up to 750 bar) 252 702 1002 1502 1852 2502 Technical Data High-Pressure Plunger Pump Type 252 / 702 approx. 1.8 l approx. 50 kg net 45 mm/1.77 inch