Ball float steam trap 기계식스팀트렙 ( 증기와드레인의비중차이용 ) 볼플로트식스팀트렙 CONA SC ANSI / SC Plus ANSI Ball float steam trap CONA SC Ball float steam trap with capsule

Size: px
Start display at page:

Download "Ball float steam trap 기계식스팀트렙 ( 증기와드레인의비중차이용 ) 볼플로트식스팀트렙 CONA SC ANSI / SC Plus ANSI Ball float steam trap CONA SC Ball float steam trap with capsule"

Transcription

1 Ball float steam trap 기계식스팀트렙 ( 증기와드레인의비중차이용 ) 볼플로트식스팀트렙 CONA SC ANSI / SC Plus ANSI Ball float steam trap CONA SC Ball float steam trap with capsule for rapid system start-up ANSI150 / with flanges (Fig ) - with screwed sockets (Fig ) - with socket weld ends (Fig ) - with butt weld ends (Fig ) Safety Forged steel/ SG iron Forged steel/ Cast steel Stainless steel Fig. 634 Page 2 Fig CONA SC Plus Ball float steam trap with capsule for rapid system start-up ANSI150 / with flanges (Fig ) - with screwed sockets (Fig ) CONA SC Ball float steam trap for drainage of water from compressed air and gas systems (acc. to PED 97/23/EC fluid group 2) ANSI150 / with flanges (Fig ) - with screwed sockets (Fig ) - with socket weld ends (Fig ) - with butt weld ends (Fig ) Forged steel Fig. 635 Page 4 Forged steel/ SG iron Forged steel/ Cast steel Stainless steel Fig. 636 Page 6 Fig HALLE AWH ARMATUREN- WERK HALLE GMBH A member of the ARI group Features: Back pressure-free condensate discharge even at extreme pressure- and quantity fluctuations Controller with integrated automatic ventilation (except Fig. 636) Robust and insensitive to waterhammer Non return protection (except Fig. 635) Union for pressure compension line and bypass possible On-site change of the installation position is possible according to the operating instructions The controller maybe changed without disturbing the pipe work Pressure test acc. to API 598 CRN approved Data sheet englisch (english)

2 Ball float steam trap (Forged steel/sg iron, Forged steel/cast steel, Stainless steel) CONA SC 634 ANSI ANSI150/300-1/2-1 Fig with flanges Top view Fig with socket weld ends Fig (ANSI150) with screwed sockets - vertical installation Fig (ANSI300) with screwed sockets - horizontal installation Fig with butt weld ends Figure Nominal pressure ANSI (Y) ANSI ANSI (Y) ANSI300 Material Body: SA182F321 / Hood:SA351CF8 Body: SA182F321 / Hood: SA351CF8 DIN/EN-Constructions refer to data sheet CONA SC/SC-Plus NPS 1/2-1 Operating pressure PS Inlet temperature TS allowable differential pressure ΔPMX 5,5 barg 427 C g 199 C 28 barg 427 C 32 barg 411 C 2,g 510 C g 467 C 12,8 barg 218 C 26,2 barg 510 C 32 barg 262 C 21 bar 32 bar 12,8 bar 21 bar 32 bar for controller R 21 R32 R 21 R32 Types of connection Other types of connection on request. Flanges...1 acc. to ASME B16.5 Screwed sockets...2 NPT thread acc. to ANSI B or Rp thread acc. to DIN EN Socket weld ends...3 acc. to ASME B16.11 Butt weld ends...4 ASME B16.25 (Note restriction on operating pressure / inlet temperature depending to design!) Features Ball float steam trap with level control for the condensate-discharge Discharge of great condensate quantities even at low differential pressure from all kinds of steam systems ANSI150 without strainer / ANSI300 with outside strainer - Fig. 634 (Y) Rapid system start-up due to thermostatic air venting capsule Body with flanged hood (for condensate with temperatures 100 C) Non return protection Immediate discharge of hot boiling condensat The controller maybe changed without disturbing the pipe work Mounting position Standard: vertical Please indicate when ordering! Refer to: Information about the different installation positions (Page 13) Optional: horizontal with inlet from right or left On-site change of the installation position is possible according to the operating instructions. Vent plug (Pos. 47) Manual air vent valve (Pos. 51) Plug (Pos. 50) Ball valve for blow down (Pos. 56) 2

3 Types of connection Flanges Screwed sockets Socket weld ends Butt weld ends NPS 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 Face-to-face acc. to data sheet resp. customer request L (mm) (250) 200 (250) 200 (250) Dimensions Standard-flange dimensions refer to page 11. H (mm) B (mm) B1 (mm) B2 (mm) S (mm) S1 (mm) Weights (approx.) (kg) 6,7 6,9 7,1 4,7 4,9 5,1 5,1 5,4 5,8 Parts Pos. Sp.p. Description Fig Fig (Y) Fig Fig (Y) 1 Body SA105 SA182F321 7 x Strainer -- SA240Gr SA240Gr Strainer plug -- SA182F SA182F x Sealing ring SA182F Hood SA216WCB SA351CF8 17 x Gasket GRAPHIT (CrNi laminated with graphite) 24 x Controller / Capsule, cpl. SA240Gr.304 / Hastelloy 27 Cheese head screw SA193Gr.B16 (with metric screw-thread) 47 Vent plug (M14x1,5) SA182F321 (with metric screw-thread) 49 x Sealing ring SA182F x Plug (M14x1,5) SA182F321 (with metric screw-thread) 51 x Manual air vent valve SA182F321 (with metric screw-thread) 56 x Ball valve for blow down SA351CF8M (with metric screw-thread) Spare parts Information / restriction of technical rules need to be observed! Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list). Operating and installation instructions can be downloaded at Pressure-Temperature-Diagram CONA SC 634 ANSI ANSI150/300-1/2-1 Capacity chart Flow The capacity chart shows the maximum flow of hot boiling condensate. The total cold water capacity is the result of: - The capacity of the trap is increased by 1,2 x the value shown in the capacity chart. - The thermostatic air vent is open, provided additional capacity as shown in the table Vent plug (Pos. 47), Plug (Pos. 50), Manual air vent valve (Pos. 51), Ball valve for blow down (Pos. 56) (restricted to 16 bar, 210 C) Differential pressure considering drainage into atmosphere Additional cold water-flow quantity of the thermostatic steam trap at starting conditions Δp in bar 0, Q (approx. 20 C) in kg/h

4 CONA SC Plus 635 ANSI ANSI150 / Ball float steam trap (Forged steel) Top view Fig with screwed sockets - vertical installation Fig with flanges - horizontal installation Figure Nominal pressure Material NPS Operating pressure PS Inlet temperature TS allowable differential pressure ΔPMX for controller ANSI ANSI ,5 barg 427 C 10 barg 306 C g 199 C 1 g 427 C 5 bar 10 bar R5 R10 DIN/EN-Constructions refer to data sheet CONA SC/SC-Plus Types of connection Flanges...1 acc. to ASME B16.5 Screwed sockets...2 NPT thread acc. to ANSI B or Rp thread acc. to DIN EN Features Ball float steam trap with level control for the condensate-discharge from all kinds of steam systems Rapid system start-up due to thermostatic air venting capsule (for condensate with temperatures 100 C) Immediate discharge of hot boiling condensat Mounting position Standard: vertical Optional: horizontal with inlet from right or left Air vent - (Pos. 51) or blow down valve (Pos. 46), manual operated Other types of connection on request. Discharge of great condensate quantities even at low differential pressure Body with flanged hood The controller maybe changed without disturbing the pipe work Please indicate when ordering! Refer to: Information about the different installation positions (Page 13) On-site change of the installation position is possible according to the operating instructions. 4

5 CONA SC Plus 635 ANSI ANSI150 / Types of connection Flanges Screwed sockets NPS 1 1 Face-to-face acc. to data sheet resp. customer request L (mm) Dimensions Standard-flange dimensions refer to page 11. H (mm) H1 (mm) B (mm) B1 (mm) S (mm) Weights (approx.) (kg) 11 8,5 Parts Pos. Sp.p. Description Fig Fig Body SA x Sealing ring SA182F Hood SA216WCB 17 x Gasket GRAPHIT (CrNi laminated with graphite) 24 x Controller / Capsule, cpl. SA240Gr.304 / Hastelloy 27 Stud SA193Gr.B16 (with metric screw-thread) 28 Hexagonal nut SA193Gr.B16 (with metric screw-thread) 46 x Blow down valve, cpl. SA182F321 (with metric screw-thread) 49 x Sealing ring SA182F x Plug (M14x1,5) SA182F321 (with metric screw-thread) 51 x Manual air vent valve SA182F321 (with metric screw-thread) Spare parts Information / restriction of technical rules need to be observed! Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list). Operating and installation instructions can be downloaded at Pressure-Temperature-Diagram Working Pressures barg Temperature F CL150 Steam saturation curve CL300 Steam Water Temperature C Working Pressures psig ; Material: SA105;SA216WCB (Operating Limits ASME B16.34 STANDARD CLASS) 50 Capacity chart Flow Differential pressure considering drainage into atmosphere Air vent - (Pos. 51) or blow down valve (Pos. 46), manual operated The capacity chart shows the maximum flow of hot boiling condensate. 5

6 Ball float steam trap (Forged steel/sg iron, Forged steel/cast steel, Stainless steel) CONA SC 636 ANSI ANSI150/300-1/2-1 Fig with flanges Top view Fig with socket weld ends Fig with butt weld ends Fig (ANSI150) with screwed sockets - vertical installation Figure Nominal pressure ANSI (Y) ANSI ANSI (Y) ANSI300 Material Body: SA182F321 / Hood:SA351CF8 Body: SA182F321 / Hood: SA351CF8 DIN/EN-Constructions refer to data sheet CONA SC/SC-Plus NPS Fig (ANSI300) with screwed sockets - horizontal installation Operating pressure PS Inlet temperature TS allowable differential pressure ΔPMX 5,5 barg 427 C g 199 C 28 barg 427 C 32 barg 411 C 2,g 510 C g 467 C 12,8 barg 218 C 26,2 barg 510 C 32 barg 262 C 21 bar 32 bar 12,8 bar 21 bar 32 bar for controller R 21 R32 R 21 R32 Types of connection Flanges...1 acc. to ASME B16.5 Screwed sockets...2 NPT thread acc. to ANSI B or Rp thread acc. to DIN EN Socket weld ends...3 acc. to ASME B16.11 Butt weld ends...4 ASME B16.25 (Note restriction on operating pressure / inlet temperature depending to design!) Features Ball float steam trap with level controller for the ANSI150 without strainer / ANSI300 with outside strainer - Fig. 636 (Y) condensate-discharge from compressed air and gas systems Body with flanged hood (acc. to PED 97/23/EC fluid group 2, other fluid groups on request) Non return protection Discharge of great condensate quantities even at The controller maybe changed without disturbing the pipe work low differential pressure Mounting position Standard: vertical horizontal with inlet from right or left Optional: horizontal with adapter for recovery pipe (union joint). Example for installation ref. to page 10 Manual air vent valve (Pos. 51) Ball valve for blow down (Pos. 56) Please indicate when ordering! Other types of connection on request. Refer to: Information about the different installation positions (Page 11) On-site change of the installation position is possible according to the operating instructions. Union (Pos. 52) for recovery pipe (for connecting pipes with outside-ø 8 x 1 mm acc. to EN steel or EN stainless steel, compression type fitting acc. to DIN 2353) Softsealing ball FKM (Viton), max. 120 C 6

7 Screwed sockets Types of connection Flanges Butt weld ends Socket weld ends NPS 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 Face-to-face acc. to data sheet resp. customer request L (mm) (250) 200 (250) 200 (250) Dimensions Standard-flange dimensions refer to page 11. H (mm) B (mm) B1 (mm) S (mm) Weights (approx.) (kg) 6,7 6,9 7,1 4,7 4,9 5,1 5,1 5,4 5,8 Parts Pos. Sp.p. Description Fig Fig (Y) Fig Fig (Y) 1 Body SA105 SA182F321 7 x Strainer -- SA240Gr SA240Gr Strainer plug -- SA182F SA182F x Sealing ring A4 SA182F Hood SA216WCB SA351CF8 17 x Gasket GRAPHIT (CrNi laminated with graphite) 24 x Controller, cpl. SA240Gr.304 / Hastelloy 27 Cheese head screw SA193Gr.B16 (with metric screw-thread) 47 Vent plug (M14x1,5) SA182F321 (with metric screw-thread) 49 x Sealing ring SA182F x Plug (M14x1,5) SA182F321 (with metric screw-thread) 51 x Manual air vent valve SA182F321 (with metric screw-thread) 52 x Union for recovery pipe AISI303 (with metric screw-thread) 56 x Ball valve for blow down SA351CF8M (with metric screw-thread) Spare parts Information / restriction of technical rules need to be observed! Resistance and fitness must be verified (contact manufacturer for information, refer to Product overview and Resistance list). Operating and installation instructions can be downloaded at Pressure-Temperature-Diagram CONA SC 636 ANSI ANSI150/300-1/2-1 Capacity chart Flow Manual air vent valve (Pos. 51), Union (Pos. 52) for pressure compension line, Ball valve for blow down (Pos. 56) (restricted to 16 bar 210 C) Differential pressure considering drainage into atmosphere The capacity chart shows the maximum flow of cold water for the different controller. 7

8 CONA SC ANSI / SC Plus ANSI Informations about pipe welding / Non return protection / Recovery pipe Informations about pipe welding Welding groove acc. to ASME B16.25 The material used for ARI valves with butt weld ends are: SA105 SA182F321 Due to our experience, we recommend to apply an electric welding process. Because of the different material compositions and wall thickness of the steam traps and the pipe gas welding shall not be applied. Quenching cracks and coarse grain structure may develop. Steam traps with socket-weld ends shall only be welded by arc welding (welding process 111 acc. to DIN EN 24063). If during the time of warranty others than the manufacturer or by the manufacturer authorized persons are interfering in the product and/or the setting, the right of claim for warranty will lapse! Integrated non return protection seat automatic ventilation (bei Fig. 634/635) closes automatically on backflow The internal plate acts at series 634 and 636 as integrated check valve.. In case of parallel installed heat exchangers or heater batteries the non return protection prevents a shut down heat-exchanger fror flooding with condensate from the downstream side and reverse heating up. A check valve which otherwise has to be installed is not necessary. plate of check valve valve ball Installation with recovery pipe product line recovery pipe for gas return steam, air or gas with condensate collector line for condensat valve for drainage of dirt (FABA -Plus) ball float steam trap Fig. 636 horizontal installation steam, air or gas condensat stop valve (FABA -Plus) Important: The installation of a recovery pipe for gas return is always recommended; especially if the ball float steam trap is installed horizontally. stop valve (FABA -Plus) Selection criteria: Example for order data: Steam pressure Back pressure Quantity of condensate Flow medium Nominal diameter / pressure Type of connection Material Place of service or kind of steam consumer Ball float steam trap CONA SC, Fig. 634, ANSI150, NPS 1, SA105/SA216WCB,, with flanges, Face-to-face dimension 160 mm Other installation positions than standard (vertical) have to be indicated together with the information about the flow direction i.e. inlet from left or right 8

9 CONA SC ANSI / SC Plus ANSI Standard-flange dimensions / Information about the different installation positions Standard-flange dimensions acc. to ASME B16.5 NPS 1/2 3/4 1 ØD (mm) ANSI150 ANSI300 ØK (mm) n x Ød (mm) 4 x 16 4 x 16 4 x 16 ØD (mm) ØK (mm) 66,5 82,5 89 n x Ød (mm) 4 x 16 4 x 19 4 x 19 Information about the different installation positions (shown at Fig. 634 CONA SC ANSI) Horizontal installation - inlet from the left side (ZL) Vertical installation (standard) Horizontal installation inlet from the right side (ZR) Installation (see picture) The ball float steam traps can be installed either in vertical (standard) or horizontal position. In case of horizontal installation please indicate whether the inlet is from the left or right side. The steam trap can also be converted on site to match the different installation positions. Please observe the appropriate operating manuals. The steam trap must be fitted with the direction of flow as indicated by the arrow on the body. Enough clearance (refer to dimension S) for the removal of the hood shall be provided. The steam trap shall preferably be installed at the lowest point of the system and the membrane capsule resp. the bleeding tube shall be installed in an upright position inside of the hood. For the modification of the installation position observe the operating manual. A modification of the installation position during the time of warranty shall be carried out by the AWH-Service or it shall be agreed between the customer and manufacturer. 9

10 CONA SC ANSI / SC Plus ANSI Accessories / further components Multifunction tester ARImetec -S Vacuum breaker Fig. 655 CODI S with gland packing Fig. 671/672; CODI B with bellows seal, maintenance-free Fig. 675/676 Automatic air vent for liquid systems Fig. 656 Condensate discharge temperature limiter Fig. 645/647 Flow indicator Fig. 660/661 Return temperature limiter Fig. 650 (Further informations about the accessories can be found in the appropriate data sheets.) Liquid drainer Fig. 665 HALLE AWH ARMATUREN- WERK HALLE GMBH A member of the ARI group QUA LI TY MANAGEMENT SY S T EMS ISO 9001 WHG 19 I Technology for the Future. G E R M A N Q U A L I T Y V A L V E S ARI-Armaturen Albert Richter GmbH & Co. KG, D Schloß Holte-Stukenbrock, Tel / 994-0, Telefax / or 159 Internet: info.vertrieb@ari-armaturen.com 10

02 Reihe bis 750 bar GB-9.03

02 Reihe bis 750 bar GB-9.03 Water as a tool High-Pressure Plunger Pumps 02-Line (up to 750 bar) 252 702 1002 1502 1852 2502 Technical Data High-Pressure Plunger Pump Type 252 / 702 approx. 1.8 l approx. 50 kg net 45 mm/1.77 inch

More information

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i

(specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements) 11 (location selection) 12 (storage bin) 12 (i SERVICE MANUAL N200M / N300M / N500M ( : R22) e-mail : jhyun00@koreacom homepage : http://wwwicematiccokr (specifications) 3 ~ 10 (introduction) 11 (storage bin) 11 (legs) 11 (important operating requirements)

More information

歯Trap관련.PDF

歯Trap관련.PDF Rev 1 Steam Trap Date `000208 Page 1 of 18 1 2 2 Application Definition 2 21 Drip Trap, Tracer Trap, 2 22 Steam Trap 3 3 Steam Trap 7 4 Steam Trap Sizing 8 41 Drip Trap 8 42 Tracer Trap 8 43 Process Trap

More information

기능.PDF

기능.PDF 1 1) 1 2) SK COMPLEX 1 Heating Cooling 3) 1 2 2 3 1) 2 2) 3 4 1) Floating Type Heat Exchanger 8 2) Fixed Type Heat Exchanger 11 3) U-Type Heat Exchanger 13 4) Air Fan Cooler 15 5) Double Pipe Heat Exchanger

More information

WOMA Pumps - Z Line

WOMA Pumps - Z Line High-Pressure Plunger Pumps Z-Line (up to 1500 bar) 150 Z 250 Z 400 Z 550 Z 700 Z 1000 Z High-Pressure Plunger Pump Type 150 Z 211 133 250 615 100 95 Discharge 60 -Konus 9.5 deep M12x17 deep 322 255 331

More information

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection)

(Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) SERVICE MANUAL (Table of Contents) 2 (Specifications) 3 ~ 10 (Introduction) 11 (Storage Bins) 11 (Legs) 11 (Important Operating Requirements) 11 (Location Selection) 12 (Storage Bins) 12 (Ice Machine)

More information

Contents Steam traps Engineering Data Manual & N450 2 8 1012 4 14 16 18 20 21 TA N650 N450, TA, N650

Contents Steam traps Engineering Data Manual & N450 2 8 1012 4 14 16 18 20 21 TA N650 N450, TA, N650 wwwyounwoocokr Steam Traps Contents Steam traps Engineering Data Manual & N450 2 8 1012 4 14 16 18 20 21 TA N650 N450, TA, N650 175psig & 4page 8page 8page : 125psig 10page 12page 3 & 4 Application Heating

More information

歯국문-Heatran소개자료1111.PDF

歯국문-Heatran소개자료1111.PDF Heat Transfer Technology Heat Transfer Technology HEATRAN Heat Transfer Technology 1. 회사개요 Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer Technology Heat Transfer

More information

CFP 제작(0113)

CFP 제작(0113) C 1514E C ISO 9001 ISO14001 OHSAS 18001 C-series foot support process pump ISO2858 ISO5199 www.hsgoodsprings.com EASY TO CONTACT TEL : 82-55-268-8976 FAX : 82-55-268-7947 Global Excellence, Hyosung Pump

More information

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series

GD-SERISE / GS-SERISE DESCRIPTION GD / GS series pneumatic actuator are designed & developed with new concept for the next generation. GD / GS series High Class 공압식엑츄에이터 PNEUMATIC ACTUATORS Rack & Pinion Designed GD-SERISE Double Acting GD-SERISE Single Acting (Spring Return) GINICE Co., Ltd www.ginice.co.kr / www.ginice.com GD-SERISE / GS-SERISE DESCRIPTION

More information

나사식볼밸브.indd

나사식볼밸브.indd HWASUNG VALVES 19~1990 001~010 19. 03 19. 0 1991~000 199. 1 199. 1 199. 11 199. 09 1999. 03 1999. 09 1999. 09 1999. 10 1999. 11 000. 0 000. 03 001~010 001. 03 001. 10 001. 11 00. 0 003. 03 003. 0 00. 01

More information

소개.PDF

소개.PDF (c) Process Pressure Measurement 1 Process Pressure Measurement Flow, Level, Temperature Flow, Level, Temperature, 2, 1) ( ),, A F F/A 2), 3 (a) (b) (a) (b) (c) 1 (a) (ABSOLUTE PRESSURE), 10 kg/cm 2 abs

More information

#KM-235(110222)

#KM-235(110222) PARTS BOOK KM-235A/B INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part Parts No. : Unique Product

More information

KM-380BL,BLB(100908)

KM-380BL,BLB(100908) PARTS BOOK KM-380BL KM-380BLB KM-380BL KM-380BLB MODEL FOR HEAVY MATERIAL KM-380BL CYLINDER-BED TYPE, 1-NEEDLE UNISON FEED, VERTICAL LARGE HOOK, LOCK-STITCH MACHINE. KM-380BLB CYLINDER-BED TYPE, 1-NEEDLE

More information

F&C 표지5차(외면) - 완성본

F&C 표지5차(외면) - 완성본 유리 테이퍼관 부유식 유량계 (Glass Taper Tube Local Flow Meters) FGF Series / FGO FGF Series / FGO 모델선택 (Model Selection Guide) FGF Series / FGO MODEL FGF(N.S) FGM FMO CODE DESCRIPTION GLASS TAPER TUBE LOCAL FLOW

More information

........(2006)-01

........(2006)-01 플러그 U-패킹 세면기(도기) 삼각패킹 와샤 프렌지 너트 고정너트 세면기(도기) 프렌지 너트 와샤 고정너트 몸통 파이프 연결너트 가로대 연결대 스크류 폽업로드 5mm 노브 물마개 플러그 삼각패킹 U-패킹 U-클립 세면기(도기) 프렌지 너트 고정너트 몸통 파이프 연결너트 가로대 폽업로드 5mm 노브 물마개 플러그 삼각패킹 U-패킹 U-클립 와샤 벽면 벽면 Ø6

More information

D101351X0KR_May17

D101351X0KR_May17 646 Fisher 646... 1... 1... 3... 4... 4... 4... 5... 5... 5... 6... 7... 7... 7... 9... 9... 9... 9... 10... 11... 12... 12... 13... 15... 15... 15 1. Fisher 646 Fisher 646,,..,,,, 646,.,,.. W6783 1 www.fisher.com

More information

X-VA-MT3809G-MT3810G-kor

X-VA-MT3809G-MT3810G-kor www.brooksinstrument.com 기본적인 설명 진행전 반드시 읽어 주십시오. Brooks 는 많은 국내 및 국제 기준을 충족하기 위해 제품을 설계, 생산 및 테스트를 합니다. 이 제품이 제대로 설치, 운영되고 그 들이 정상 사양 내에서 작동하도록 지속적인 유지보수가 필요합니다. Brooks Instrument 제품을 설치, 사용 및 유지보수 시

More information

#KM560

#KM560 KM-560 KM-560-7 PARTS BOOK KM-560 KM-560-7 INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part

More information

Parts List

Parts List COP 1440 Drifter Parts for Atlas Copco Atlas Copco No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks 3115 1605 90 set of nipple 1set *} front head 3115 0286 00 dome nut 0.26kg 3115

More information

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기

Pilot Operated Regulator 1098-EGR 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기 용도 도시가스지구정압기 (City Gate Station, Main Station) 도시가스지역정압기 (District Station) 상 공업용대유량전용정압기 ( 빌딩, 공장, 병원, 학교 ) 산업용대유량기구 Governor (Mixer, Boiler, Furnace, Plant Air Service) 특징 고정밀도, 대유량 - Loading Type Pilot

More information

#KM-340BL

#KM-340BL PARTS BOOK KM-340BL 고속 1본침 본봉 상하송 재봉기 High Speed, 1-Needle, Upper and Lower Feed Lock Stitch Machine W/Large Hook PME-100707 SunStar CO., LTD. INFORMATION A. Parts Book Structure of Part Book Unique code

More information

GLHPS-D

GLHPS-D Digital Hot Plate & Stirrer GLHPS-D 글로벌랩의 제품을 구입하여 주셔서 감사드립니다. 제품을 사용하시기 전에 안전을 위한 준비사항 을 읽고 올바르게 사용해 주십시오. 이 사용설명서는 제품을 직접 사용하시는 분에게 보내어지도록 하여 주십시오. 사용 전 주의 사항 제품을 올바르게 사용하여 위험이나 재산상의 피해를 막기 위한 내용으로 반드시

More information

Coriolis.hwp

Coriolis.hwp MCM Series 주요특징 MaxiFlo TM (맥시플로) 코리올리스 (Coriolis) 질량유량계 MCM 시리즈는 최고의 정밀도를 자랑하며 슬러리를 포함한 액체, 혼합 액체등의 질량 유량, 밀도, 온도, 보정된 부피 유량을 측정할 수 있는 질량 유량계 이다. 단일 액체 또는 2가지 혼합액체를 측정할 수 있으며, 강한 노이즈 에도 견디는 면역성, 높은 정밀도,

More information

<BACEBDBAC5CD20BAEAB7CEBCC52D A2DC3D6C1BE2D312D E6169>

<BACEBDBAC5CD20BAEAB7CEBCC52D A2DC3D6C1BE2D312D E6169> DOOCH PUMP Intelligent pressure boosting system 5Hz BOOSTER PUMP SYSTEM Water supply system Pressure boosting system Irrigation system Water treatment system Industrial plants 두크펌프 www.doochpump.com CONTENTS

More information

歯coolingtower개요_1_.PDF

歯coolingtower개요_1_.PDF . Cooling Tower Cooling Tower Counter Flow Cross Flow,. 1.Cooling Tower. Air Flow 1) Counter Flow System Fan Air Fan Discharge Distributor Fill Counter Flow ( ) Cold Water Basin. 1 Counter Flow System

More information

#KM-250(PB)

#KM-250(PB) PARTS BOOK FOR 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE SERIES KM-250AU-7S KM-250AU-7N KM-250A-7S KM-250A-7N KM-250B-7S KM-250B-7N KM-250BH-7S KM-250BH-7N KM-250BL-7S KM-250BL-7N KM-250AU KM-250A KM-250B

More information

MIL-C-99 Class C, R Style Connector, Receptacle, lectrical, Wall mounting YH7(MS7 Style) PLCS 전기적특성 (lectrical ata) ltitude erating Service Rating Nom

MIL-C-99 Class C, R Style Connector, Receptacle, lectrical, Wall mounting YH7(MS7 Style) PLCS 전기적특성 (lectrical ata) ltitude erating Service Rating Nom MIL-C-99 Class C, R Style MIL-C-99 Class C, R Style 주문정보 및 부품번호 구분 (Ordering Information) MS7 C 0 C 7 P W MS Number Shell Style Class Contact rrangement Contact Style Polarizing Position MS Number Shell

More information

歯전용]

歯전용] 2001. 9. 6 1. 1. (1) (1) 1 (2) (2) 2 3 INVESTER PROFESIONAL ORGANIZATION GOVERNMENT CODE COMMITTEE SPECIFICATION CODE LAW LICENSE PERMIT PLANT 4 5 6 7 2. (1) 2. (1) 8 9 (2) (2) 10 (3) ( ). () 20kg/ (P70,

More information

Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (%

Alloy Group Material Al 1000,,, Cu Mg 2000 ( 2219 ) Rivet, Mn 3000 Al,,, Si 4000 Mg 5000 Mg Si 6000, Zn 7000, Mg Table 2 Al (% http://wwwtechnonetcokr (Aluminum & Aluminum BasedAlloy) : LG 1 Aluminum Table 1, 2 1000 7000 4 Al 990% Al 1XXX AlCu 2XXX AlMn 3XXX AlSi 4XXX AlMg 5XXX AlMgSi 6XXX AlZn(Mg, Cu) 7XXX 8XXX ( ) 9XXX Fig 1

More information

D103198X0KR_Jul18 Korean

D103198X0KR_Jul18 Korean Fisher i2p-100... 1... 1... 2... 2... 2... 5... 7... 7... 8... 9... 10... 10... 11... 12... 12... 12... 12... 14... 14... 16... 16... 17... 18 1. Fisher i2p-100 W8710... 19... 20 Fisher i2p 100,, ( 1 )..,,,,

More information

#KLZ-371(PB)

#KLZ-371(PB) PARTS BOOK KLZ-371 INFORMATION A. Parts Book Structure of Part Book Unique code by mechanism Unique name by mechanism Explode view Ref. No. : Unique identifcation number by part Parts No. : Unique Product

More information

*KM-380BL,BLB724.

*KM-380BL,BLB724. PARTS BOOK KM-380BL KM-380BLB KM-380BL KM-380BLB PME-051104 MODEL FOR HEAVY MATERIAL KM-380BL CYLINDER-BED TYPE, 1-NEEDLE UNISON FEED, VERTICAL LARGE HOOK, LOCK-STITCH MACHINE. KM-380BLB CYLINDER-BED TYPE,

More information

#SC-8200.B.

#SC-8200.B. PARTS BOOK SC8200 CONTENTS A B C D E F G H I J K L Machine Body Mechanism Upper Shaft Mechanism Needle Bar Mechanism Presser Bar Mechanism Pulley Mechanism Feed Mechanism Lower Shaft Mechanism Looper

More information

# KM

# KM PARTS BOOK 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER 1-NEEDLE, NEEDLE FEED LOCK-STITCH MACHINE WITH VERTICAL EDGE TRIMMER MODEL KM-506 SERIES KM-506-7S 1-NEEDLE, STRAIGHT LOCK-STITCH

More information

#KM-250š

#KM-250š PARTS BOOK FOR 1-NEEDLE, STRAIGHT LOCK-STITCH MACHINE SERIES KM-250AU-7S KM-250AU-7N KM-250A-7S KM-250A-7N KM-250B-7S KM-250B-7N KM-250BH-7S KM-250BH-7N KM-250BL-7S KM-250BL-7N KM-250AU KM-250A KM-250B

More information

5. Kapitel URE neu

5. Kapitel URE neu URE Fuses for Semiconductor Protection European-British Standard Standards: IEC 60 269-4 BS 88-4 Class: ar Voltage ratings: AC 240 V AC 700 V Current ratings: 5 A 900 A Features / Benefits High interrupting

More information

Berechenbar mehr Leistung fur thermoplastische Kunststoffverschraubungen

Berechenbar mehr Leistung fur thermoplastische Kunststoffverschraubungen Fastener 독일 EJOT 社에서 만든 최고의 Plastic 전용 Screw 아세아볼트 CO., LTD. 대한민국 정식 라이센스 생산 업체 EJOT GmbH & Co. KG DELTA PT März 2003 Marketing TEL : 032-818-0234 FAX : 032-818-6355 주소 : 인천광역시 남동구 고잔동 645-8 남동공단 76B 9L

More information

한국콘베어-AP8p

한국콘베어-AP8p K O R E A C O N V E Y O R K.C AP APRON CONVEYOR Apron Conveyors are used for conveying various bulk materials. They are particulary suitable for conveying hot materials such as clinker. K.C Apron Conveyors

More information

page 1end

page 1end C 0.0.2 ma Cr 14.5~16.5 Co 2.5 max Iron 4~7 Mn 1 max Mo 15 ~ 17 Ni Balance P 0.03 max Si 0.08 max S 0.03 max W 3 ~ 4.5 V 0.35 max 8.89g/cm 3 Multipurpose corrosion resistance of NickelMolybdenumChrome.

More information

Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE

Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE Elix 3 Elix 5 Elix 10 RiOs 3 RiOs 5 RiOs 8 RiOs 16!.. MILLIPORE ...1...1 1....2 1-1... 2 1-2... 2 1-3... 3 1-4... 3 1-5... 4 1-6... 4 1-7... 5 1-8... 5 1-9... 6 2....7 2-1... 7 2-2... 7 2-3 Cl2 tablet...

More information

DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They

DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They DC Link Capacitor DC Link Application DC Link capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filtering, smoothing. They are Metallized polypropylene (SH-type)

More information

step 1-1

step 1-1 Written by Dr. In Ku Kim-Marshall STEP BY STEP Korean 1 through 15 Action Verbs Table of Contents Unit 1 The Korean Alphabet, hangeul Unit 2 Korean Sentences with 15 Action Verbs Introduction Review Exercises

More information

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket

Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Vertical Probe Card for Wafer Test Vertical Probe Card Technology Pin Technology 1) Probe Pin Testable Pitch:03 (Matrix) Minimum Pin Length:2.67 High Speed Test Application:Test Socket Life Time: 500000

More information

#KM-350AB..

#KM-350AB.. PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PARTS BOOK KM-350A-7S KM-350A-7N KM-350B-7S KM-350B-7N KM-350A KM-350B PME-051121 MODEL FOR THIN MATERIAL KM-350A-7S 1-NEEDLE, NEEDLE

More information

전용]

전용] A Study of select the apropos processing mechanical method by the presume of transformation of teeth s surface degree ABSTRACT This study has been tried to select the apropos processing method by the

More information

#Ȳ¿ë¼®

#Ȳ¿ë¼® http://www.kbc.go.kr/ A B yk u δ = 2u k 1 = yk u = 0. 659 2nu k = 1 k k 1 n yk k Abstract Web Repertoire and Concentration Rate : Analysing Web Traffic Data Yong - Suk Hwang (Research

More information

13장_

13장_ C H A P T E R 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 13.1 ( ) 12 000 psi [ 13 1] 6in 10 [ 13 2] (stamping) 500 501 (pressure regulator) (oil mist) (lubricator) (air dryer) (muffler) 13.2 21 % 78 % 1 % 4

More information

REVERSIBLE MOTOR 표지.gul

REVERSIBLE MOTOR 표지.gul REVERSIBLE MOTOR NEW H-SERIES REVERSIBLE MOTOR H-EX Series LEAD WIRE w RH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : Min.) MOTOR OUTPUT VOLTAGE (V) FREQUENCY (Hz) INPUT CURRENT (ma) RATING SPEED (rpm) STARTING

More information

歯174구경회.PDF

歯174구경회.PDF 000 KALIMER - Creep-Fatigue Damage Evaluation of KALIMER Reactor Internal Structures for Elevated Temperature, 150 KALIMER ASME Code Case N-01-4 0 - - - Abstract In this paper, the design limits of the

More information

Å©·¹Àγ»Áö20p

Å©·¹Àγ»Áö20p Main www.bandohoist.com Products Wire Rope Hoist Ex-proof Hoist Chain Hoist i-lifter Crane Conveyor F/A System Ci-LIFTER Wire Rope Hoist & Explosion-proof Hoist Mono-Rail Type 1/2ton~20ton Double-Rail

More information

¹Ìµå¹Ì3Â÷Àμâ

¹Ìµå¹Ì3Â÷Àμâ MIDME LOGISTICS Trusted Solutions for 02 CEO MESSAGE MIDME LOGISTICS CO., LTD. 01 Ceo Message We, MIDME LOGISTICS CO., LTD. has established to create aduance logistics service. Try to give confidence to

More information

#DPK5(PB)(9.8.19)

#DPK5(PB)(9.8.19) PARTS BOOK DPK-5 포스트 베드, 1본침 본봉 지그재그 재봉기 Post Bed, Single-Needle Lock Stitch Zig Zag Sewing Machines PME-090929 SunStar CO., LTD. INFORMATION A. Parts Book 구성 Structure of Part Book ① ② ③ ④ ⑤⑥ ⑦ ⑧⑨ ① 관계

More information

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v

Z DB 6 -X V * Sandwich plate = Z Further details in clear text With pressure valve cartridges = No code = Without locating pin hole (only applies to v RK 5 75/0.0 압력 릴리프 밸브 파일럿 작동식 타입 ZDB와 ZDB 공칭 사이즈 6 시리즈 X 최대 작동 압력 5 bar 최대 유량 60 L/min H556 0 타입 Type ZDB 6 VP-X/... 개요 특징 목차 페이지 특징 주문코드 우선 공급 가능 사양 기호 기능, 단면도 기술자료 특성곡선 유니트 치수 샌드위치 플레이트 밸브 DIN 0 형식 A에

More information

The Top Ten Moulding Problems

The Top Ten Moulding Problems 900 1700 1960,,,,,,,,, FDA 1, II 500 100 (toughness) 1, 2 (screw) 25mm(01 ) (pellet) 3mm(0125 ), 23mm(009 ) 1,000kg(2,200lb) 25kg(551lb) 08g/cm 3 (50lb/ft 3 ) 1 2 3 4 (thermal shutoff), (heater band),

More information

PL E-Euro-V01.pmd

PL E-Euro-V01.pmd Price List valid from 1st of March 2009 English 1/2009 The Profile System Order comments Article-Number - additional specification.60 definines 1 bar of aluminium profile, length 6 m Example: 1.09.016040.14LP.60

More information

INDUCTION MOTOR 표지.gul

INDUCTION MOTOR 표지.gul INDUCTION MOTOR NEW HSERIES INDUCTION MOTOR HEX Series LEAD WIRE TYPE w IH 1PHASE 4 POLE PERFORMANCE DATA (DUTY : CONTINUOUS) MOTOR TYPE IHPF10 IHPF11 IHPF IHPF22 IHPFN1U IHPFN2C OUTPUT 4 VOLTAGE

More information

1 grating steel bar grating 730890 Hot Dip Galvanized Steel Bar Grating stage flooring stair treads 2 heat resisting casting 732510 parts of refuse in

1 grating steel bar grating 730890 Hot Dip Galvanized Steel Bar Grating stage flooring stair treads 2 heat resisting casting 732510 parts of refuse in 엔지니어링 / 플랜트 제작업체 2010 한일부품소재조달전시상담회(서울) 참가업체 안내 1. 업체 정보 회사명 상담 희망 기업에만 공개 회사명(영) 상담 희망 기업에만 공개 플랜트 설비(환경, 수처리, 에 Engineering & Construction (Envirnmental, Water 주요생산품 너지, 파이프라인, 강( 鋼 )구조, 산업기계) 주요생산품(영)

More information

04-다시_고속철도61~80p

04-다시_고속철도61~80p Approach for Value Improvement to Increase High-speed Railway Speed An effective way to develop a highly competitive system is to create a new market place that can create new values. Creating tools and

More information

사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서 제품을 사용하지 마십시오. 3.이 제품은

사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서 제품을 사용하지 마십시오. 3.이 제품은 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 사용자설명서 TourBus 0 & TourBus 5 사용시 기본적인 주의사항 경고 : 전기 기구를 사용할 때는 다음의 기본적인 주의 사항을 반드시 유의하여야 합니다..제품을 사용하기 전에 반드시 사용법을 정독하십시오. 2.물과 가까운 곳, 욕실이나 부엌 그리고 수영장 같은 곳에서

More information

Microsoft PowerPoint - Powertrain_Sensor

Microsoft PowerPoint - Powertrain_Sensor Manifold Absolute Pressure(Temperature) Sensor Manifold Absolute Pressure (Temperature) Sensor measures the pressure (temperature) of intake manifold for calculating indirectly the intake air flow quantity

More information

TI-S02-27.qxp

TI-S02-27.qxp 제품의개발및개선을위하여사전통보없이규격변경을할수있습니다. 본자료의유효본유무를확인하신후이용하시기바랍니다. KP 1512 TI-S02-27 ST Issue 8 (KR 1112) / 볼후로트식스팀트랩 (1 HC, 1¼, ) 1 1¼ -C 개요, 는스텐레스강재질의내부부품과자동에어벤트가표준으로내장된구상흑연주철재질의볼후로트식스팀트랩이다. 수평배관에설치해야하며나사식배관연결방법으로만공급된다.

More information

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할

저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할 저작자표시 - 비영리 - 변경금지 2.0 대한민국 이용자는아래의조건을따르는경우에한하여자유롭게 이저작물을복제, 배포, 전송, 전시, 공연및방송할수있습니다. 다음과같은조건을따라야합니다 : 저작자표시. 귀하는원저작자를표시하여야합니다. 비영리. 귀하는이저작물을영리목적으로이용할수없습니다. 변경금지. 귀하는이저작물을개작, 변형또는가공할수없습니다. 귀하는, 이저작물의재이용이나배포의경우,

More information

.....pdf

.....pdf MUSSO POWER SYSTEM General Catalog 211 MUSSO POWER SYSTEM Leader in Chain Technology GENERAL CATALOG 211 The best choice and satisfaction We support your success. Table of Contents 4 Chain & Sprocket 6

More information

Page 2 of 6 Here are the rules for conjugating Whether (or not) and If when using a Descriptive Verb. The only difference here from Action Verbs is wh

Page 2 of 6 Here are the rules for conjugating Whether (or not) and If when using a Descriptive Verb. The only difference here from Action Verbs is wh Page 1 of 6 Learn Korean Ep. 13: Whether (or not) and If Let s go over how to say Whether and If. An example in English would be I don t know whether he ll be there, or I don t know if he ll be there.

More information

72129o

72129o 유지보수정보 Third Edition Second Printing Part No 97773 Genie Industries 1 9 10 12 14 16 20 21 26 28 36 http//wwwgenieliftcom techpub@genieindcom Copyright 2000 Genie Industries 6, 2002 10 2 2, 2004 8 3 2,

More information

대경테크종합카탈로그

대경테크종합카탈로그 The Series Pendulum Impact 601 & 602 Analog Tester For Regular DTI-602B (Izod) DTI-601 (Charpy) DTI-602A (Izod) SPECIFICATIONS Model DTI-601 DTI-602 Type Charpy for plastics lzod for plastics Capacity

More information

E136~172 K-1수정

E136~172 K-1수정 2 3 Thread Milling Insert E : External I : Inernal EI : External & Internal 2 Thread Milling Holder S : Shank type 4 0 : 0.4mm : mm : mm 22 : 22mm 2 : 2mm 3 : 3.mm mm : 0. -.0 tpi : 4-3 4 R : Right Hand

More information

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78

B-3 B-4 HDV B-8 B-37 B-39 3S1A B-40 3S2A B-42 3S3A B-44 3S4A B-45 B-11 B-15 S1A B-16 K2A B-20 K3A B-24 S3A B-27 S4A B-30 S5A B-33 HPV5-6, HPV5-8 B-78 - - HDV -8-7 -9 S1-0 S - S - S - -11 - S1-16 K -0 K - S -7 S -0 S - HV-6, HV-8-78 -7-9 S11, S1-60 S1, S1-61 -7-9 S11-0 K1-1 K1 - S1 - S1 - S1 - HNV000-6 -6 HMV -66 HMV -69 HLV -7 HLV -7 HFV -76 HVC -81

More information

歯1.PDF

歯1.PDF 200176 .,.,.,. 5... 1/2. /. / 2. . 293.33 (54.32%), 65.54(12.13%), / 53.80(9.96%), 25.60(4.74%), 5.22(0.97%). / 3 S (1997)14.59% (1971) 10%, (1977).5%~11.5%, (1986)

More information

CONTENTS FLOATLSS LEVEL SWITCH 04 ELECTRODE HOLDER 22 AUTOMATIC LEVEL SWITCH 24 FLOAT LEVEL SWITCH 31 MINI FLOAT LEVEL SWITCH 38 TIMING RELAY 51 SUPER MICOM TIMER 53 48 (SM)MICOM TIMER SERIES 57 MICOM

More information

D200138X0KR_Jun19

D200138X0KR_Jun19 Fisher 358 358i 58i............ 5... 6... 6... 6 58i... 8... 9... 14... 14... 14... 16... 16... 16... 17 358i... 17 58i... 19... 0... 0 ( ) 1. Fisher 358 358i W5498 1 W844-1 358 358i www.fisher.com ()......

More information

1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard curr

1. Features IR-Compact non-contact infrared thermometer measures the infrared wavelength emitted from the target spot and converts it to standard curr Non-Contact Infrared Temperature I R - Compact Sensor / Transmitter GASDNA co.,ltd C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX: +82-32-623-7510

More information

회사소개서

회사소개서 업무혁신아이디어구현사례 지능형 CAD 를이용한배관물량산출 우병엔지니어링 1 CONTENTS 1 2 3 INTRODUCTION CUSTOMIZED FUNCTIONS TYPICAL PIPING DRAWING 4 PIPE, FITTING & VALVE DATA 5 WORKING SEQUENCE INTRODUCTION 핵심아이디어 Intelligent CAD 의 Drawing

More information

歯삼성SDI개요

歯삼성SDI개요 The problem statement Air LOSS. LOSS. The problem statement The problem statement The Goal statement Base Line 1,864 / Goal 1,677 / Entitlement 1,584 / 2001 LOSS 10% Define of Physical Output Defining

More information

RC /07.12 RC / /6 2 3 / CA-08A-2N 2 CA-10A-2N 2 CA-12A-2N 2 CA-16A-2N 2 CA-20A-2N CA-08A-3N 4 CA-10A-3N 4 CA-12A-3N

RC /07.12 RC / /6 2 3 / CA-08A-2N 2 CA-10A-2N 2 CA-12A-2N 2 CA-16A-2N 2 CA-20A-2N CA-08A-3N 4 CA-10A-3N 4 CA-12A-3N RC 18325-70/07.12 RC 18325-70/02.10 1/6 2 3 / 3 4 2 CA-08A-2N 2 CA-10A-2N 2 CA-12A-2N 2 CA-16A-2N 2 CA-20A-2N 2 2 3 CA-08A-3N 4 CA-10A-3N 4 CA-12A-3N 4 CA-16A-3N 4 CA-20A-3N 4 4 3 CA-08A-3C 3 CA-10A-3C

More information

2) Available Sizes 공급 가능 (1) A열연 1 30Kg급 900 1300 < 40 2 40Kg급 900 1300 < 40 3 50Kg급 900 1000 1100 사전협의 필요 (Please consult us in advance) < 1.6 < 1.9

2) Available Sizes 공급 가능 (1) A열연 1 30Kg급 900 1300 < 40 2 40Kg급 900 1300 < 40 3 50Kg급 900 1000 1100 사전협의 필요 (Please consult us in advance) < 1.6 < 1.9 1) Standard & Applications 제품 및 용도 용도 Applications 열간압연 연강재 Hot Rolled Mild Steel Plate, Sheet 냉연용 탄소강재 Reduced Carbon Steel for Cold Rolled Steel 일반구조용 Rolled Steel for General Structure 용접구조용 Rolled

More information

Product A4

Product A4 2 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 3 4 APTIV Film Versatility and Performance APTIV Film Versatility and Performance 5 PI Increasing Performance PES PPSU PSU

More information

ÇѱÛÇ¥Áö

ÇѱÛÇ¥Áö KOSA KOSA KOSA KOSA KOSA Assembly, Engineering Plastic KOSA Accessory Content KOSA Overview K-004 Technical Data K-006 KA40B with Timing Belt Drive K-008 KA60B with Timing Belt Drive K-010 KA60S with Ball

More information

Microsoft PowerPoint - Powertrain_Actuator

Microsoft PowerPoint - Powertrain_Actuator Injector Precise fuel metering Wide dynamic operation range Excellent linearity of low dynamic flow Fast response MPI injector is a type of solenoid valve which injects fuel into the intake port with precise

More information

about_by5

about_by5 WWW.BY5IVE.COM BYFIVE CO. DESIGN PARTNERS MAKE A DIFFERENCE BRAND EXPERIENCE CONSULTING & DESIGN PACKAGE / OFF-LINE EDITING CONSULTING & DESIGN USER EXPERIENCE (UI/GUI) / ON-LINE EDITING CONSULTING & DESIGN

More information

?????????????????2009-????????

?????????????????2009-???????? KOPEC, a Global Leading Engineering Company Humaneering KOPEC Nuclear Power NUCLEAR POWER 06 07 Isolation Valve Rupture Disk To Containment Atmosphere Throttle Valve Pressurizer Steam Generator Reactor

More information

00.1

00.1 HOSPA Chipboard screws with countersunk head Material: Drive: Cross recess PZ galvanized yellow chromatized nickel plated burnished Partly threaded, galvanized or yellow chromatized dk k L d m Head Ø dk

More information

D101728X0KR_Oct18

D101728X0KR_Oct18 3710 3720 Fisher 3710 3720 3722... 2... 2... 2... 5... 6... 6 3722... 6 3722... 7... 8... 8 25 50 585 585R 3710 3720... 13... 15... 16... 17... 17,,... 17... 19 3720... 19... 20... 22... 22... 23... 24...

More information

002-022~41-기술2-충적지반

002-022~41-기술2-충적지반 Improvement cases of waterproofing and auxiliary construction methods in alluvium soil tunnel In the past, subway tunnel is mostly applied to rock tunnel in order to secure the safety. But, in recent years,

More information

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770>

<313630313032C6AFC1FD28B1C7C7F5C1DF292E687770> 양성자가속기연구센터 양성자가속기 개발 및 운영현황 DOI: 10.3938/PhiT.25.001 권혁중 김한성 Development and Operational Status of the Proton Linear Accelerator at the KOMAC Hyeok-Jung KWON and Han-Sung KIM A 100-MeV proton linear accelerator

More information

Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드]

Microsoft PowerPoint - ch03ysk2012.ppt [호환 모드] 전자회로 Ch3 iode Models and Circuits 김영석 충북대학교전자정보대학 2012.3.1 Email: kimys@cbu.ac.kr k Ch3-1 Ch3 iode Models and Circuits 3.1 Ideal iode 3.2 PN Junction as a iode 3.4 Large Signal and Small-Signal Operation

More information

Microsoft PowerPoint - AC3.pptx

Microsoft PowerPoint - AC3.pptx Chapter 3 Block Diagrams and Signal Flow Graphs Automatic Control Systems, 9th Edition Farid Golnaraghi, Simon Fraser University Benjamin C. Kuo, University of Illinois 1 Introduction In this chapter,

More information

- iii - - i - - ii - - iii - 국문요약 종합병원남자간호사가지각하는조직공정성 사회정체성과 조직시민행동과의관계 - iv - - v - - 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - α α α α - 15 - α α α α α α

More information

최종동아수정도큐01

최종동아수정도큐01 DONG HWA INDUSTRIAL CO., LTD. INDUSTRIAL CO., LTD. Innovative company with advanced technology DONG HWA CONTENTS 9 Water cooled oil coolers 11 Water cooled oil coolers(dnc) 13 Water cooled oil coolers(dlc)

More information

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 Part Picture Description 5. R emove the memory by pushing the fixed-tap out and Remove the WLAN Antenna. 6. INS [Caution] Attention to red sentence 3-1. Disassembly and Reassembly R520/ 1 2 1 1. As shown in picture, adhere Knob to the end closely into the arrow direction(1), then push the battery up (2). 2. Picture

More information

ePapyrus PDF Document

ePapyrus PDF Document 19 3 (2009 9 ) J Korean Soc Occup Environ Hyg 2009;19(3):240~249 Numerical Study on Ventilation Method for Temperature Control of HRSG Building Chul Hwan Kim Jong Wook Lee Hoon Ki Choi Geun Jong Yoo Dept.

More information

#KM-1751/1791..

#KM-1751/1791.. PARTS BOOK KM-1751 KM-1791 Code Lubrication Type Code Application Code Hook Code Trimming 0 S M Semi-Dry Type Micro Lubrication Type Dry Head F G Foundation General materials None L Standard Hook Large

More information

975_983 특집-한규철, 정원호

975_983 특집-한규철, 정원호 Focused Issue of This Month Gyu Cheol an, MD Department of Otolaryngology ead & Neck Surgery, Gachon University of College Medicine E - mail : han@gilhospital.com Won-o Jung, MD Department of Otolaryngology

More information

#KM857/867..

#KM857/867.. PARTS BOOK KM-857 KM-857-7 KM-867 KM-867-7 PME-051214 MODEL KM-857 HIGH SPEED POST BED, 1- NEEDLE NEEDLE FEED LOCK STITCH MACHINE KM-857-7 HIGH SPEED POST BED, 1- NEEDLE NEEDLE FEED LOCK STITCH MACHINE

More information

Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controll

Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controll Turbine Digital Flowmeter SEMI U+ 특징 PVC, PTFE, P.P, PVDF 등 다양한 재질 Size, 유량, Connection별 주문제작 정밀성, 내화학성이 우수 4~20mA, Alarm, 통신(RS485) 등 출력 제품과 Controller의 장착 및 사용이 편리 Specification (사양) 적용유체 : 액체 (D.I or

More information

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head.

COLUMN, BED, SADDLE The column is of a rugged box-type construction and its ground slide ways are wide to support and guide securely the spindle head. BED TYPE UNIVERSAL MILLING MACHINE KMB/POINT KMB/POINT-U3 KMB/POINT-U5 KMB/POINT-U6 KMB/POINT-U7 KMB : MANUAL POINT : ONE AXIS CNC CONTROL(HEIDENHAIN TNC124) COLUMN, BED, SADDLE The column is of a rugged

More information

-시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사

-시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사 대청호자연생태관 복합체험시설 활용 리모델링공사 시 방 서 ( 건 축 ) 2016. 05 -시방서 목차- 1. 공 사 개 요 1 2. 총 칙 2 제 1 장. 가 설 공 사 8 제 2 장. 목 공 사 9 제 3 장. 수 장 공 사 10 제 4 장. 창 호 공 사 21 제 5 장. 유 리 공 사 27 제 6 장. 도 장 공 사 34 제 7 장. 철 거 공 사 55

More information

歯RCM

歯RCM Reliability Centered Maintenance Page 2 1.,,,. Mode Component, Sub-system, System, System. Reliability Centered Maintenance :, program? Mechanism Page 3 Page 4. Mode Mode () () (FMEA) (FTA) (LTA) System

More information

#KM

#KM PARTS BOOK KM-2300 Code Lubrication type Code Application F Full-Dry type A Light materials S Semi-Dry type G General materials M Micro-Lubrication type B Heavy materials Only use B (Heavy materials) code

More information