Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using

Size: px

Start display at page:

Download "Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using"

영배 황보
6 years ago
Views:

1 Adjustable 각도조절및회전형 Wall 벽걸이 Mount 지지대 User 사용설명서 Guide WMN4070S WMN4270S Finished wall mount Components Please make sure to use the components and parts supplied with the product. Adjustable mount Parts Screws b: 4 EA M8X23 M6X15 M8X27 M8X15 Washers : 4 EA Screws a: 7 EA Anchors: 7 EA 1 EA Assembly tool Cable tie: 1 EA Safety precautions Make sure that an installation engineer specified by your dealer installs the product. Make sure that an installation engineer specified by your dealer moves or replaces the product after the installation. Do not hang onto the installed product and avoid impacts to the product. 1. Do not let children play underneath the product when it is installed. Children may hit their heads against the edge of the product. 2. Take care when you adjust the angle or rotate the product because the back of the product may make contact with the wall. (You can prevent damage to the product and the wall by attaching sponges to the 4 edges of the product.) 3. Do not install the product in a hot, humid location or on a weak wall that is unable to sustain the weight of the product. 4. Do not insert your hand into the groove at the bottom of the TV while installing the TV onto the wall mount as this may result in an electric shock. 5. Make sure to cover the groove at the bottom of the TV that becomes visible after removing the stand using the separate cover supplied with the TV. Wall Mount-WMN4070S-05.indb :23:51

Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure. 32 56 1 Fixing the anchors and screws a Drill a hole using a 6X50 drill bit.

(Moving the adjustable mount while fastening the screws onto the wall makes it easier to fasten the screws.

2 Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole using a 6X50 drill bit. (WMN-2370: 4X25) Clean the inside of the hole. Insert the enclosed anchor into the hole. 4 7 Fix the adjustable mount onto the wall with anchors and screws a from 1 to 7 in this order. (Moving the adjustable mount while fastening the screws onto the wall makes it easier to fasten the screws.) If you cannot fasten the anchors and screws at the specified positions, fasten them at the nearest possible positions. Align the adjustable mount with the hole and fasten the screw a. When you drill a hole in the wall, make sure to use a drill bit with the specified diameter. Failing to do so may result in a safety issue. Check the strength of the wall, and if the wall is insufficiently strong, reinforce the wall before installing the product on the wall. The screws and anchors supplied with the product are to fix the product onto wood or concrete. Check the material of the wall and use appropriate fixing screws depending on the type of material such as plaster board, marble or iron plate. 2 Remove the screws from the back of the TV and fasten the 4 screws b onto the back of the TV with the enclosed assembly tool until each of the screws projects out by 5mm. To hang the TV onto the adjustable mount, a projected part of at least 5 mm is necessary. (The installation method and screws b for the installation may differ depending on the TV model. To ensure a proper installation, refer to the attached table.) Flat-type fastening hole TV Convex-type fastening hole TV Enclosed Holder Ring If the fastening holes on the back of the TV are convex-type fastening holes, fasten the screws using the Holder-Ring supplied with the TV. Hang the TV onto the wall mount and make sure to check if the TV has been installed properly onto the wall mount by observing the assembled TV as you move the wall mount from left to right. Take care not to hurt your fingers when you install the TV or adjust the wall mount. Make sure to fix the wall mount onto the wall firmly. If the TV falls, it may result in injury or damage to the product. Wall Mount-WMN4070S-05.indb :23:53

3 3 Pull the wall mount brackets as far forward as possible and hang the TV onto the wall mount at the specified positions as shown by the figure while 2 persons are holding the TV. WMN4070S After fixing the TV onto the wall mount, firmly fasten the 4 screws b so that the TV and the wall mount are completely fastened. (Fastening force: 10 ~ 15 Kg) 4 Tie the power cord and the other cables with the enclosed cable tie as shown by the figure and make sure that the cables do not come loose when the wall mount is adjusted. After connecting the cables and pulling the adjustable mount as far forward as possible, arrange the cables using the cable tie that has been passed through the specified hole in the adjustable mount as shown by the figure. The cable will then not interfere with the wall mount. Check the operation 2 or 3 times and if there is no problem, fix the wall molding. Wall Mount-WMN4070S-05.indb :23:53

4 Adjusting the wall mount angle This product has adopted a Smooth Moving Mechanism so that it always moves very smoothly. -20 ~20-10 ~10-10 ~10-20 ~20 Adjust the angle of the product carefully. Using excessive force may result in the product hitting the wall and becoming damaged. Adjust the horizontal angle by holding both sides of the product. When you adjust the vertical angle, hold the top center of the product. Then you can smoothly adjust the angle. You can adjust the angle up to -10 ~ 10 horizontally and up to -20 ~ 20 vertically. The allowed adjustable angle may differ depending on the model. Product specifications [ Main Body Fixing Part ] [ Screw Fixing Part ] Specifications Width (mm) 248 Height (mm) 255 Depth (mm) 30 Weight (Kg) 2.4 Wall mount VESA specifications 200 X 200 The product appearance and specifications are subject to change for product improvement purposes without prior notice. Wall Mount-WMN4070S-05.indb :23:53

5 각도조절및회전형벽걸이지지대사용설명서 WMN4070S 벽걸이완제품 구성품 벽걸이설치시반드시제공되는구성품및부품을사용하여주세요. 각도조절장치 부속품 나사 b : 4 개 M8X23 M6X15 M8X27 M8X15 와셔 : 4 개 나사 a : 7 개 앵커 : 7 개 1 개 조립공구 와이어고정부품 : 1 개 안전을위한주의사항 제품설치는반드시판매점에서지정한전문설치업자에게의뢰해주세요. 설치후제품을이동하거나교체시에는반드시 판매점에서지정한전문설치업자에게문의하세요. 설치후매달리거나심한충격을주지마세요. 1. 제품아래에서아이가놀지못하게하세요. 모서리에머리가부딪칠수있습니다. 2. 각도조절을하거나회전시에제품의뒷면이벽과부딪칠수있으니주의하세요. ( 모서리 4곳에스폰지등을부착하면벽과제품이상하는것을방지할수있습니다.) 3. 고온다습한곳이나제품의무게를견디지못하는벽에는설치하지마세요. 4. 감전의위험이있으므로벽걸이설치중에 TV 제품하단의스탠드분리홈에절대손을넣지마세요. 5. TV 제품의스탠드가분리된홈은 TV 제품에있는별도의덮개를반드시막고벽걸이설치작업을완료하여주세요. Wall Mount-WMN4070S-05.indb :23:54

6 벽걸이설치방법 1 각도조절장치를그림과같이벽면에고정하십시오 앵커및나사 a 고정방법 6X50 의드릴로구멍을뚫으세요. (WMN-2370 : 4X25) 뚫은구멍을청소하세요. 구멍에동봉된앵커를삽입하세요. 4 7 각도조절장치를앵커와나사a 로그림과같이 1번에서 7번까지순서대로고정시키세요. ( 벽면고정을위하여각도조절장치의회전부위를좌우로돌려서작업하시면편리합니다.) 불가피하게지정된위치에고정하지못할경우에는가장인접한곳으로이동하여고정하세요. 각도조절장치를구멍에맞추어나사a를체결하세요. 벽에구멍을뚫을때에는반드시지정된직경의드릴비트및드릴을사용하세요. 지정되지않은방법으로설치할경우에는안전상의문제가발생될수있습니다. 벽의강도를확인한후에강도가충분하지못한곳은반드시적절한보강작업을한뒤에설치하세요. 동봉된나사와앵커는목재와콘크리트체결용입니다. 벽을확인하여석고보드, 대리석, 철판등에는적절한전용체결나사를사용하세요. 2 TV 본체의나사를제거한후에, 동봉된조립공구로나사 b 4 개를그림과같이 TV 뒷면에 5 mm 정도만남기고조여주세요. 각도조절장치에걸기위하여 5 mm 정도의공간이필요합니다. (TV 모델별조립방법과사용되는나사 b 의종류가다를수있습니다. 정확한조립을위해첨부된표를참고하세요.) 평면형체결홀 TV 오목형체결홀 TV 동봉된 Holder-Ring TV 본체뒷면이 오목형체결홀 일경우, TV 에동봉된 Holder-Ring 사출물을이용하여조립하시기바랍니다. 본체를벽걸이에걸은후에모두정확하게걸렸는지좌, 우측면에서필히확인하세요. 설치및각도조절시손가락이끼일수있으니조심하세요. 벽걸이브라켓이벽에단단하게고정되어있지않으면본체가떨어져다칠수있으니단단하게고정하세요. Wall Mount-WMN4070S-05.indb :23:55

7 3 그림과같이벽걸이의브라켓고정부를전면으로최대한당긴후에 TV 본체를반드시두사람이들고벽걸이의지정부위에걸어주십시오. WMN4070S 벽걸이에 TV 본체를완전히고정한후에조립공구를다시사용하여나사 b 4 개를완전히 밀착하도록단단하게조여주세요. ( 조임력 : 10 ~ 15 Kg) 4 전원선및기타주변기기연결선의처리는동봉된와이어고정부품을사용하여그림과같이묶은후에회전및작동시에이탈되거나빠지지않는지확인해주시길바랍니다. 케이블을삽입한후에각도조절장치를전면으로최대한당긴후에와이어를그림과같이각도조절기의지정한구멍을 이용하여정형하게되면회전시에연결선과간섭되지않습니다. 2 ~ 3 회동안동작확인후, 이상이없을시에는벽면몰딩을고정바랍니다. Wall Mount-WMN4070S-05.indb :23:56

8 벽걸이각도조절방법 본제품은소비자의편리성을위해 SMOOTH MOVING MECHANISM 을도입하여아주부드럽게움직이도록 설계되어있습니다. -20 ~20-10 ~10 제품의각도를조정할때너무강한힘을주면제품이벽면과부딪쳐손상을입을수있으니주의하세요. 좌우각도를조정할때에는제품의양옆부분을잡아주고, 상하각도를조정할때에는제품윗면의가운데를잡으면부드럽게원하는각도로조절할수있습니다. -20 ~20 각도조절은상 / 하방향으로 -10 ~ 10, 좌 / 우방향으로 -20 ~ 20 까지임의로조절할수있습니다. 모델에따라각도조절장치의각도가상이할수있습니다. -10 ~10 제품사양 [ 본체고정부 ] [ 나사고정부 ] 제품규격 폭 (mm) 248 높이 (mm) 255 깊이 (mm) 30 무게 (Kg) 2.4 벽걸이 VESA 규격 200 X 200 제품의외관이나사양등은제품의개량을위해서, 사전에예고없이변경될수있습니다. Wall Mount-WMN4070S-05.indb :23:56

Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole usin

Installing the wall mount 1 Fix the adjustable mount onto the wall as shown by the figure Fixing the anchors and screws a Drill a hole usin Adjustable Wall Mount User Guide WMN4270S Finished wall mount Components Please make sure to use the components and parts supplied with the product. Adjustable mount Bracket Parts Screws c: 4 EA M8X35